work chairs

visio overview

• Visio Chairs have been designed and tested for users weighing up to 300 lbs• Visio Chairs are equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces couldresult in unexpected rolling and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealerfor appropriate selection

• Task Chair with Synchro-Tilt shown

Visio, a fully featured mesh Task Chair with multiple options at a mid-range price point.

Back Tilt Lock (Not shown)

Tension Control

Seat Slider/ Seat DepthAdjustment of 2 1/2"

Five Star Base

2 3/8"

Arm Height Adjustment 2D - 4"4D - 4 3/4"

Seat Height Adjustment:Standard 16 1/2" - 20 1/2"High 17"-22"Low 14 1/2" - 17 1/2"

Plastic Back Frame

Statement of Line

Total Arm Width Adjustment:2D - 3"4D - 4 1/4"

Flexweave Back Fabric

Lumbar Apex HeightAdjustment of 3" Lumbar

Depth Range of 0.6"

Mid-Back – No Arms

Mid-Back – 2D Arms

Mid-Back – Fixed T-Arms

Mid-Back – 4D Arms

With Headrest Fixed T-ArmsWith Headrest

seating price & user guide – September 28, 2015

work chairs

seating price & user guide – September 28, 2015

visio dimensions & material requirements

SEAT FABRIC COM COL [yards] [sq. ft]

Mid-Back 3/4 9

Arm Height from Seat

Fixed T-Arms 8"

2D 7"- 11"

4D 7 1/4"- 12"

Adjustable Seat Depth16 1/2" - 19"

Backrest Height from Seat

23 3/4"

Overall Height (without headrest)

41" Headrest adds 7.5"- 10"

Seat Width 18 1/2"

Lumbar Apex Height 6"-10"

Overall Depth 30"

Overall Width 30"

Angle between Seatand Back 94˚ - 108˚

Seat Height from Floor

Standard 16 1/2"- 20 1/2"

Low 14 1/2" - 17 1/2"

High 17 1/4" - 22 1/4"

Dimensions

For Conversion to Metric, multiply dimension by 25.4.

COM/COL Material Requirement

More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching. Leatheryield varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size andshape of hide. The size of the sewing pattern and the number of units ordered may also impact yield. Always round-up to thenext hide.

Width Between Arms Fixed T-Arms 18 1/2"2D 17"- 20" 4D 14"- 20 1/4"

Back Width19"

WEIGHT

Task Chair 46 lbs

visio adjustment features & instructions

SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT

BACK TILT ADJUSTMENT TILT TENSION ADJUSTMENT

HEADREST DEPTH ADJUSTMENT HEADREST HEIGHT ADJUSTMENT

Leaning back, determine if theresistance of the chair iscomfortable. For less resistance,pull the tension adjustment knobout and turn it counterclockwise.For greater resistance, turn theknob clockwise.

To adjust the angle of reclination,push the lever down to unlock theback. Recline to the desiredposition and lift the lever up tolock in place or leave to allowbackrest to recline freely.

To adjust the seat depth, depressthe button and simultaneously liftyour weight from the seat whilesliding the seat forward orbackward. Release the button tolock the seat in place.

To raise the chair, lift the lever upwhile lifting your weight from theseat until you reach the desiredlevel, then release to lock in place.To lower the chair, lift the lever upand allow your weight to push theseat down until you reach thedesired level, then release to lockin place.

To adjust the headrest depth,depress the button and pull orpush the headrest forward orbackward. Release the button tolock the headrest in place.

To adjust the headrest height,depress the button and raise orlower the headrest to the desiredheight. Release the button to lockthe headrest in place.

work chairs

seating price & user guide – September 28, 2015

work chairs

seating price & user guide – September 28, 2015

2D/4D ARM WIDTH ADJUSTMENT 2D ARM HEIGHT ADJUSTMENT

4D ARM HEIGHT ADJUSTMENT 4D ARM PIVOT ADJUSTMENT

4D ARM SLIDER ADJUSTMENT LUMBAR ADJUSTMENT

To pivot the arm cap, grasp thearm, rotate inward or outward andrelease at the desired position.

To adjust the arm height, press thesmall button located behind eitherarm to raise or lower it to thedesired position. Release thebutton to lock in place.

To adjust the arm height, press thesmall button on the outside ofeither arm to raise or lower it tothe desired position. Release thebutton to lock in place.

To adjust the arm cap depthposition, grasp the arm cap andfirmly slide forward or backwardto the desired position.

To adjust the lumbar height, grasplumbar pad while seated and slideit up or down to the desiredposition. For lumbar depthadjustment, press the pad inward;depress buttons to release tooriginal position.

visio adjustment features & instructions (continued)

To adjust the width of eacharm, push the lever down andslide the arm to the desiredposition. Pull the lever up tolock the arm in place.

N V I TVisio – Task Chair

FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Lumbar height adjustment of 3"• Three position lumbar depth adjustments of 0, 0.3" and 0.6" with total range of 0.6"• 4D arm pivots 20˚• 4D arm depth is adjustable• Seat depth adjustment of 2 1/2"• Back-tilt can be locked in three positions or left free flow• Ebony base is available in plastic only• Synchro-tilt 2:1 ratio• Tension control• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete, or tileNOTESHeadrest is finished in Black vinyl.

work chairs

seating price & user guide – September 28, 2015

4D Arm Fixed T-Arm

2D Arm

DESCRIPTION PRICE

COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10

No Arms 814 832 854 875 894 914 936 954 974 1044Fixed T-Arms 904 922 944 965 984 1004 1025 1044 1064 11342D Height- & Width-Adjustable T-Arms 929 949 971 990 1011 1031 1052 1072 1092 11624D Width-, Height- & Depth-Adjustable T-Arms 959 979 1000 1019 1040 1060 1081 1101 1121 1191

Leather Leather Leather Leather LA LB LC LD

No Arms 992 1018 1101 1129Fixed T-Arms 1082 1108 1191 12192D Height- & Width-Adjustable T-Arms 1108 1135 1218 12464D Width-, Height- & Depth-Adjustable T-Arms 1137 1164 1247 1275

If Headrest (Y) is specified add 117

If Lumbar Element (Y) is specified add 69

If Seat Depth Adjustment (S) is specified add 56

If Polished Aluminum Back Upright (C9) is specified add 45

If Polished Aluminum Base (C9) is specified add 66

If Soft Casters (A) are specified add 18

If Hard Glides (B) are specified add 18

If Soft Glides (C) are specified add 29

Headrest

N NoHeadrest

Y WithHeadrest

LumbarElement

N NoLumbarElement

Y WithLumbarElement

Arm Style

N No Arms

F Fixed T-Arms

W 2DHeight-& Width-Adj. T-Arms

Q 4DWidth-,Height-& Depth-AdjustableT-ArmswithPivotingArm Caps

BackUpholsteryFinish

FlexweaveFabric

FW11 Storm White

FW12 Sahara Frost

FW13 Carbon Blue

FW14 Espresso

FW15 Ebony

FW16 Banner Red

FW17 Graphic Steel

SeatUpholsteryFinish

Fabric

Leather

Seat DepthAdjustment

N No Seat DepthAdjustment

S With Seat DepthAdjustment

Seat DepthAdjustment (If applicable)

1 2" Range

CylinderStyle

1 Standard

2 High

3 Low

BackUprightFinish

52 Ebony

C9 PolishedAluminum

Base Finish

52 Ebony

C9 PolishedAluminum

Casters/Glides(Optional)

A Casters,Soft

~ Casters,Hard

B Glides,Hard

C Glides,Soft

PRODUCT OPTIONS

SAMPLE ORDER CODE

NVIT N Y Q FW14 M205 N 2 C9 C9

work chairs

N V I T JVisio – Task Chair

(CAL-TB133)

FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Lumbar height adjustment of 3"• Three position lumbar depth adjustments of 0, 0.3" and 0.6" with total range of 0.6"• 4D arm pivots 20˚• 4D arm depth is adjustable• Seat depth adjustment of 2 1/2"• Back-tilt can be locked in three positions or left free flow• Ebony base is available in plastic only• Synchro-tilt 2:1 ratio• Tension control• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete, or tileNOTESHeadrest is finished in Black vinyl.

seating price & user guide – September 28, 2015

2D Arm

4D Arm

DESCRIPTION PRICE

Grade 1 Grade 2 Grade 3

No Arms 900 920 942Fixed T-Arms 990 1010 10322D Height- & Width-Adjustable T-Arms 1017 1037 10594D Width-, Height- & Depth-Adjustable T-Arms 1047 1066 1088

If Headrest (Y) is specified add 117

If Lumbar Element (Y) is specified add 69

If Seat Depth Adjustment (S) is specified add 56

If Polished Aluminum Back Upright (C9) is specified add 45

If Polished Aluminum Base (C9) is specified add 66

If Soft Casters (A) are specified add 18

If Hard Glides (B) are specified add 18

If Soft Glides (C) are specified add 29

CAL-TB133 – flammability test procedure established by the State of California for seating furniture that is used in public occupancies.

Headrest

N NoHeadrest

Y WithHeadrest

LumbarElement

N NoLumbarElement

Y WithLumbarElement

Arm Style

N No Arms

F Fixed T-arms

W 2DHeight-& Width-Adj. T-Arms

Q 4DWidth-,Height-& Depth-AdjustableT-ArmswithPivotingArm Caps

BackUpholsteryFinish

FlexweaveFabric

FW11 Storm White

FW12 Sahara Frost

FW13 Carbon Blue

FW14 Espresso

FW15 Ebony

FW16 Banner Red

FW17 Graphic Steel

SeatUpholsteryFinish

Fabric

Leather

Seat DepthAdjustment

N No Seat DepthAdjustment

S With Seat DepthAdjustment

Seat DepthAdjustment (If applicable)

1 2" Range

CylinderStyle

1 Standard

2 High

3 Low

BackUprightFinish

52 Ebony

C9 PolishedAluminum

Base Finish

52 Ebony

C9 PolishedAluminum

Casters/Glides(Optional)

A Casters,Soft

~ Casters,Hard

B Glides,Hard

C Glides,Soft

PRODUCT OPTIONS

SAMPLE ORDER CODE

NVITJ N Y Q FW14 M205 N 2 C9 C9

Fixed T-Arm