vip video converter user guide · wmv, flv, dvd (pal/ntsc), mpeg-1, mpeg-2, mp4, 3gp, 3gpp2, mov,...

127
VIP Video Converter Help Guide © 2012 http://www.vip-video-converter.com VIP Video Converter User Guide

Upload: others

Post on 03-Oct-2020

12 views

Category:

Documents


5 download

TRANSCRIPT

Page 1: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter

Help Guide © 2012

http://www.vip-video-converter.com

VIP Video Converter User Guide

Page 2: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 1

VIP Video Converter http://www.vip-video-converter.com

Table of Contents

About VIP Video Converter ............................................................................................................. 3

Overview .......................................................................................................................................... 4

Supported Formats .......................................................................................................................... 5

Supported Video Formats ........................................................................................................... 5

Supported Audio Formats ........................................................................................................... 5

Supported Physical Devices ......................................................................................................... 5

User Interface .................................................................................................................................. 6

Main Window .............................................................................................................................. 6

Main Window - Upper Toolbar ................................................................................................ 7

Main Window - Right Toolbar ................................................................................................. 7

Main Window – Bottom Toolbar ............................................................................................. 8

Main Window – Status Bar ...................................................................................................... 9

Online Video Downloader & Converter ........................................ Error! Bookmark not defined.

Common Screen Captures ................................................................. Error! Bookmark not defined.

Converting Files ............................................................................................................................ 14

Converting To Video Formats .................................................................................................... 14

Converting To AVI Format ..................................................................................................... 14

Converting To MP4 Format ................................................................................................... 18

Converting To VCD Format .................................................................................................... 22

Converting To DIVX Format ................................................................................................... 26

Converting To WMV Format.................................................................................................. 30

Converting To FLV Format ..................................................................................................... 34

Converting To DVD Format .................................................................................................... 38

Converting To MPEG-1 Format .............................................................................................. 42

Converting To MPEG-2 Format .............................................................................................. 46

Converting To 3GP Format .................................................................................................... 50

Converting To 3GPP2 Format ................................................................................................ 54

Page 3: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 2

VIP Video Converter http://www.vip-video-converter.com

Page 4: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 3

VIP Video Converter http://www.vip-video-converter.com

About VIP Video Converter

VIP Video Converter © was founded in 2009, and since then is committed to provide its'

clients the best end-point software available on the market, without compromises.

we know that in order to be best, you need to focus on what you are good at, and that's

what we are doing. We are developing only one product –VIP Video Converter – and

dedicate our full time, attention and hard work, to make it what it is – the best video

converter on the market.

We believe that our clients should pay the lowest price possible for any software.

Therefore, the price of our product will always be the lowest possible to keep us working

and improving our software, for our clients.

We value all received corporation suggestions. Therefore, if you need any material from

us, such as images, more information about our product, advertising information or

anything else, please contact us via email at [email protected] .

Page 5: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 4

VIP Video Converter http://www.vip-video-converter.com

Overview

VIP Video Converter is one of the leading video converters on the market. It’s rich in

useful and easy to use features. Here we present you a short summary of them:

Converts any video / audio file to more than 170 video / audio formats, and

more than 220 devices.

Includes batch conversion support.

Allows previewing the output video file while converting.

Allows adjusting video & audio properties such as: codec, frame rate, bit rate,

video starting time, duration,

Sampling rate, size, audio channels, volume and more (Includes pre-defined

settings as well).

Supports various Windows systems, including XP, Vista, Windows 7 & more.

Allows splitting the converted video / audio file by a specific size.

Allows merging few video files, to one combined converted video / audio file.

Supports audio track extractions, from video files.

Supports drag and drop to add video / audio files

Easy to use with a friendly user interface, which will fits both beginners and

professionals.

Comes with help files, FAQ, online help and live chat support.

High converting speed and superb output video & audio quality.

And the price, as low as it can get, to keep us working on improving VIP Video

Converter for our clients.

Page 6: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 5

VIP Video Converter http://www.vip-video-converter.com

Supported Formats

VIP Video Converter supports more than 170 video and audio formats, both as input and

output formats. Here, we listed the most common ones, which you might wish to use in

your daily conversion operations.

Supported Video Formats

AVI, MP4, VCD, SVCD (PAL/NTSC), DiVX, WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-

2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD,

HD Video Formats (AVI HD, MP4 HD etc.).

Supported Audio Formats

MP3, WMA, OGG, WAV, AAC, AC3, MP2, AIFF, FLAC, AU, AMR, RA

Supported Physical Devices

Various Cellphones, iPod, iPhone, BlackBerry, iRiver, Zenvision, Xbox, PlayStation 3, PSP,

Motorola (CLIQ/DROID), Zune, iPad, AppleTV, Archos, Android, Wii, NexusOne, HTC

(G2, Hero, Tattoo), Samsung i7500, HD Video Formats for these devices.

Page 7: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 6

VIP Video Converter http://www.vip-video-converter.com

User Interface

This section will provide information about the different forms and windows in VIP Video

Converter. We’ll cover all the features and button you can navigate between and click

on. This section’s goal is to get you to know the software as you know the palm of your

hand.

Main Window

Upper

Toolbar

Right

Toolbar

Bottom

Toolbar

Page 8: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 7

VIP Video Converter http://www.vip-video-converter.com

Main Window - Upper Toolbar

The upper toolbar of the main window contains three tabs which you can switch

between, and choose the output video formats you wish to convert to. These formats

can be video formats, audio formats, or physical device (such as iPhone) formats.

1. Output Video Formats – This tab shows all the available output video formats

such as AVI, MP4, FLV, WMV, 3GP etc.

2. Output Audio Formats – This tab shows all the available output audio formats

such as MP3, AAC, AC3, WMA, OGG etc.

3. Output Physical Devices – This tab shows all the supported physical devices

which you can convert your video files to – such as iPhone, iPod, Samsung

Galaxy, Blackberry, PlayStation 3, Xbox etc.

This toolbar also includes a “Clean Selections” button at the top right corner of the

window. When clicked, this button will clear all the output format selections, to get you

started from blank (as if you just now started the software again and didn’t choose

formats for conversion yet).

Main Window - Right Toolbar

The first section in this toolbar is the “Manage Files” section, which allows you to add,

arrange and modify properties of files which are added for conversion. These are the

tasks you can perform by using the buttons in this toolbar:

1. Add Files – Add new files for conversion. These files can be almost any video or

audio files you can think of, which are supported as input files in VIP Video

Converter. Adding files via this action will add them to the main table at the

middle of the main window.

2. Up / Down – Navigation buttons which allow you to set the order of

conversions. Moving up a file in the table of files to convert means to set it

earlier for conversion.

Page 9: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 8

VIP Video Converter http://www.vip-video-converter.com

3. Advanced – This button opens a hidden part of the window, which allows you to

set custom and advanced settings for your video conversion. Properties such as

video size, frame rate, bit rate, video and audio codecs, splitting options, timing

options and more.

The second section in the right toolbar is “General Actions”:

1. Merge All – This checkbox allows you to merge all the converted video files to

one video file. Once this checkbox is checked, you can choose the Merge Output.

2. Merge Output – The video / audio format of the merged file. This is the format

all the converted files will be merged to.

Main Window – Bottom Toolbar

The bottom toolbar is responsible of the conversions output directory, the progress

report, and the most important button: “Convert”. These are the tasks which can be

performed by using this toolbar:

1. Output Directory Browse – Use this option to choose the output directory where

your converted video and audio files will be saved to.

2. Open Directory – Allows you to directly open the output directory in order to

fetch and watch the converted video / audio files.

3. Convert – This button starts the conversion of the video / audio files. Once

clicked, it will turn to a “Cancel” button which will allow you to cancel the

conversion while it’s running.

Page 10: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 9

VIP Video Converter http://www.vip-video-converter.com

Main Window – Status Bar

The status bar at the bottom of the form shows how many files were converted. As well,

it shows how many of them were converted successfully, and how many of them failed

during conversion.

Page 11: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 10

VIP Video Converter http://www.vip-video-converter.com

Common Screen Captures

The main form of the VIP Video Converter software.

The main window’s extended form, which contains the right toolbar of the advanced

properties.

Page 12: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 11

VIP Video Converter http://www.vip-video-converter.com

A demonstration of previewing a video file while converting.

A view of the original file’s properties. These are the properties of the file which was

chosen for conversion.

Page 13: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 12

VIP Video Converter http://www.vip-video-converter.com

A demonstration of conversion of few video files to other video formats.

A demonstration of a conversion of a video file to an audio format.

Page 14: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 13

VIP Video Converter http://www.vip-video-converter.com

A demonstration of a conversion of a video file to a physical device.

Page 15: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 14

VIP Video Converter http://www.vip-video-converter.com

Converting Files

Converting To Video Formats

Dozens of video file formats are supported both for input and output in VIP Video

Converter. The supported file formats include: AVI, MP4, VCD, SVCD (PAL/NTSC), DiVX,

WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263,

H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4 HD etc.).

Converting To AVI Format

In order to convert your video file to AVI video format, follow these steps:

1. Press the “To AVI” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, AVI or AVI HD). The output

format you’ve chosen should be now marked in yellow.

Page 16: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 15

VIP Video Converter http://www.vip-video-converter.com

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

Page 17: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 16

VIP Video Converter http://www.vip-video-converter.com

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Page 18: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 17

VIP Video Converter http://www.vip-video-converter.com

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

7. Once the conversion is done, the converted video files will be at the output

directory you specified at step 3. You can open that directory by clicking the

“Open Directory” button at the bottom pane.

Page 19: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 18

VIP Video Converter http://www.vip-video-converter.com

Converting To MP4 Format

In order to convert your video file to MP4 video format, follow these steps:

1. Press the “To MP4” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, MP4 or MP4 HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 20: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 19

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 21: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 20

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 22: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 21

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 23: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 22

VIP Video Converter http://www.vip-video-converter.com

Converting To VCD Format

In order to convert your video file to VCD video format, follow these steps:

1. Press the “To VCD” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, VCD or VCD HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 24: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 23

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 25: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 24

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 26: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 25

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 27: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 26

VIP Video Converter http://www.vip-video-converter.com

Converting To DIVX Format

In order to convert your video file to DIVX video format, follow these steps:

1. Press the “To DIVX” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, DIVX or DIVX HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 28: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 27

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 29: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 28

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 30: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 29

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 31: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 30

VIP Video Converter http://www.vip-video-converter.com

Converting To WMV Format

In order to convert your video file to WMV video format, follow these steps:

1. Press the “To WMV” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, WMV or WMV HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 32: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 31

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 33: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 32

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 34: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 33

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 35: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 34

VIP Video Converter http://www.vip-video-converter.com

Converting To FLV Format

In order to convert your video file to FLV video format, follow these steps:

1. Press the “To FLV” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, FLV or FLV HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 36: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 35

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 37: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 36

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 38: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 37

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 39: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 38

VIP Video Converter http://www.vip-video-converter.com

Converting To DVD Format

In order to convert your video file to DVD video format, follow these steps:

1. Press the “To DVD” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, DVD or DVD HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 40: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 39

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 41: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 40

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 42: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 41

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 43: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 42

VIP Video Converter http://www.vip-video-converter.com

Converting To MPEG-1 Format

In order to convert your video file to MPEG-1 video format, follow these steps:

1. Press the “To MPEG-1” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, MPEG-1 or MPEG-1 HD). The

output format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 44: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 43

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 45: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 44

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 46: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 45

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, MPEG-1 and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 47: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 46

VIP Video Converter http://www.vip-video-converter.com

Converting To MPEG-2 Format

In order to convert your video file to MPEG-2 video format, follow these steps:

1. Press the “To MPEG-2” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, MPEG-2 or MPEG-2 HD). The

output format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 48: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 47

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 49: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 48

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 50: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 49

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, MPEG-2 and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 51: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 50

VIP Video Converter http://www.vip-video-converter.com

Converting To 3GP Format

In order to convert your video file to 3GP video format, follow these steps:

1. Press the “To 3GP” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, 3GP or 3GP HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 52: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 51

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 53: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 52

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 54: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 53

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, 3GP and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 55: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 54

VIP Video Converter http://www.vip-video-converter.com

Converting To 3GPP2 Format

In order to convert your video file to 3GPP2 video format, follow these steps:

1. Press the “To 3GPP2” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, 3GPP2 or 3GPP2 HD). The

output format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 56: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 55

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 57: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 56

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 58: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 57

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, 3GPP2 and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 59: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 58

VIP Video Converter http://www.vip-video-converter.com

Converting To MOV Format

In order to convert your video file to MOV video format, follow these steps:

1. Press the “To MOV” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, MOV or MOV HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 60: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 59

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 61: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 60

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 62: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 61

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, MOV and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 63: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 62

VIP Video Converter http://www.vip-video-converter.com

Converting To SWF Format

In order to convert your video file to SWF video format, follow these steps:

1. Press the “To SWF” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, SWF or SWF HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 64: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 63

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 65: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 64

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 66: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 65

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, SWF and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 67: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 66

VIP Video Converter http://www.vip-video-converter.com

Converting To H.264 Format

In order to convert your video file to H.264 video format, follow these steps:

1. Press the “To H.264” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, H.264 or H.264 HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 68: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 67

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 69: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 68

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 70: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 69

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, H.264 and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 71: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 70

VIP Video Converter http://www.vip-video-converter.com

Converting To VOB Format

In order to convert your video file to VOB video format, follow these steps:

1. Press the “To VOB” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, VOB or VOB HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 72: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 71

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 73: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 72

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 74: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 73

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, VOB and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 75: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 74

VIP Video Converter http://www.vip-video-converter.com

Converting To RMVB Format

In order to convert your video file to RMVB video format, follow these steps:

1. Press the “To RMVB” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, RMVB or RMVB HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 76: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 75

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 77: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 76

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 78: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 77

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, RMVB and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 79: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 78

VIP Video Converter http://www.vip-video-converter.com

Converting To DV Format

In order to convert your video file to DV video format, follow these steps:

1. Press the “To DV” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, DV or DV HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 80: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 79

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 81: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 80

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 82: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 81

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DV and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 83: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 82

VIP Video Converter http://www.vip-video-converter.com

Converting To ASF Format

In order to convert your video file to ASF video format, follow these steps:

1. Press the “To ASF” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, ASF or ASF HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 84: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 83

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 85: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 84

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 86: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 85

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, ASF and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 87: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 86

VIP Video Converter http://www.vip-video-converter.com

Converting To Audio Formats

Dozens of audio file formats are supported both for input and output in VIP Video

Converter. The supported file formats include: MP3, WMA, OGG, WAV, AAC, AC3, MP2,

AIFF, FLAC, AU, AMR, RA.

Converting To MP3 Format

In order to convert your video file to MP3 video format, follow these steps:

1. Press the “To MP3” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, MP3 or MP3 HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

Page 88: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 87

VIP Video Converter http://www.vip-video-converter.com

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

Page 89: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 88

VIP Video Converter http://www.vip-video-converter.com

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Page 90: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 89

VIP Video Converter http://www.vip-video-converter.com

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 91: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 90

VIP Video Converter http://www.vip-video-converter.com

Converting To WMA Format

In order to convert your video file to WMA video format, follow these steps:

1. Press the “To WMA” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, WMA or WMA HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 92: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 91

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 93: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 92

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 94: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 93

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 95: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 94

VIP Video Converter http://www.vip-video-converter.com

Converting To OGG Format

In order to convert your video file to OGG video format, follow these steps:

1. Press the “To OGG” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, OGG or OGG HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 96: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 95

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 97: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 96

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 98: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 97

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 99: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 98

VIP Video Converter http://www.vip-video-converter.com

Converting To WAV Format

In order to convert your video file to WAV video format, follow these steps:

1. Press the “To WAV” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, WAV or WAV HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 100: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 99

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 101: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 100

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 102: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 101

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 103: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 102

VIP Video Converter http://www.vip-video-converter.com

Converting To AAC Format

In order to convert your video file to AAC video format, follow these steps:

1. Press the “To AAC” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, AAC or AAC HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 104: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 103

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 105: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 104

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 106: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 105

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 107: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 106

VIP Video Converter http://www.vip-video-converter.com

Converting To MP2 Format

In order to convert your video file to MP2 video format, follow these steps:

1. Press the “To MP2” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, MP2 or MP2 HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 108: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 107

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 109: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 108

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 110: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 109

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 111: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 110

VIP Video Converter http://www.vip-video-converter.com

Converting To AIFF Format

In order to convert your video file to AIFF video format, follow these steps:

1. Press the “To AIFF” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, AIFF or AIFF HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 112: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 111

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 113: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 112

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 114: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 113

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 115: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 114

VIP Video Converter http://www.vip-video-converter.com

Converting To FLAC Format

In order to convert your video file to FLAC video format, follow these steps:

1. Press the “To FLAC” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, FLAC or FLAC HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 116: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 115

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 117: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 116

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 118: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 117

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 119: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 118

VIP Video Converter http://www.vip-video-converter.com

Converting To RA Format

In order to convert your video file to RA video format, follow these steps:

1. Press the “To RA” button at the top formats menu. If there is a choice of a

specific format, please choose one (in example, RA or RA HD). The output

format you’ve chosen should be now marked in yellow.

2. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

3. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

4. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

Page 120: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 119

VIP Video Converter http://www.vip-video-converter.com

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

Page 121: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 120

VIP Video Converter http://www.vip-video-converter.com

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

Page 122: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 121

VIP Video Converter http://www.vip-video-converter.com

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

5. Now, click the “Convert !” button to start the conversion.

6. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 123: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 122

VIP Video Converter http://www.vip-video-converter.com

Converting To Physical Devices

Dozens of video and audio file formats which are played by various physical devices, are

supported both for input and output in VIP Video Converter. The supported devices

include: Various Cellphones, iPod, iPhone, BlackBerry, iRiver, Zenvision, Xbox,

PlayStation 3, PSP, Motorola (CLIQ/DROID), Zune, iPad, AppleTV, Archos, Android, Wii,

NexusOne, HTC (G2, Hero, Tattoo), Samsung i7500, HD Video Formats for these

devices.

Converting To Apple Devices

In order to convert your video file to APPLE DEVICES video format, follow these steps:

Page 124: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 123

VIP Video Converter http://www.vip-video-converter.com

7. Press the “To APPLE DEVICES” button at the top formats menu. If there is a

choice of a specific format, please choose one (in example, APPLE DEVICES or

APPLE DEVICES HD). The output format you’ve chosen should be now marked in

yellow.

8. Click the “Add Files” button at the right pane, and choose file(s) for conversion.

9. At the bottom right, click the “Browse…” button to choose the output directory.

This will be the directory where the converted files will be written to.

10. If you wish to set custom (advanced) settings, click the “Advanced >>” button to

open the right advanced properties pane.

In the right advanced properties pane you can modify some of the following properties,

which will affect the conversion process:

Video Properties

o Video Codec – The video codec which will be used to convert the video

file. You can choose from variety of codecs which are supported for your

chosen output video format. More information about video codecs at

Wikipedia …

Page 125: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 124

VIP Video Converter http://www.vip-video-converter.com

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Video Size – You can specify a custom size for the output video file (width

and height). You can choose the “Auto” option if you do not know which

video size you wish to get, or if you would like VIP Video Converter to try

and output the video file at the same size as the original video file.

o Video Bitrate – The higher the bit rate will be, the higher the video quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Frame Rate – Frames which will be shown per second. Increasing it will

also result in an increased file size and higher conversion time.

o Aspect Ratio – The ratio between width and height. Common values are

16:9 or 4:3. The “Auto” option can be selected when the original aspect

ratio is to be kept.

Audio Properties

o Audio Codec - – The audio codec which will be used to convert the audio

layer of the video file. You can choose from variety of codecs which are

supported for your chosen output format. More information about audio

codecs at Wikipedia.

In case you aren’t sure which codec to use, you can choose the “Auto”

option.

o Audio Bitrate - The higher the bit rate will be, the higher the audio quality

will be at the result video file. Increasing it will also result in an increased

file size and higher conversion time.

o Sample Rate – Amount of samples used to create an audio signal.

Increasing it will also result in an increased file size and higher conversion

time.

o Audio Channels – The number of audio channels used for the audio layer.

Common values are 1 channel (mono), 2 channels (stereo), or 5.1 (6

channels).

o Volume – Set the percentage of the audio volume which will be available

at the converted video file. This is relative to the original video file.

Page 126: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 125

VIP Video Converter http://www.vip-video-converter.com

o Mute Audio – This option allows you to mute the audio in the converted

video file.

Timing

o Starting Time – This option allows you to start the conversion at a

specific location (time) in the video file, and not from the beginning.

o Duration – This option allows you to specify a specific duration from the

video file which will be converted. This option actually also acts as an end

time, when combined with the “Starting Time” option. In example, you

can specify the “Starting Time” as 00:01:00, and duration as “00:04:00”

to convert 4 minutes, starting from the first minute of the video file.

Special

o Split – This feature allows you to split the video file to equal sized chunks

of video. This is used commonly used to squeeze video files into media

such as floppies, CD, DVD and more.

11. Now, click the “Convert !” button to start the conversion.

12. While the files are converted, you can preview the output video file by clicking

the red icon at the right part of each conversion line.

Once the conversion is done, the converted video files will be at the output directory you

specified at step 3. You can open that directory by clicking the “Open Directory” button

at the bottom pane.

Page 127: VIP Video Converter User Guide · WMV, FLV, DVD (PAL/NTSC), MPEG-1, MPEG-2, MP4, 3GP, 3GPP2, MOV, SWF, H.263, H.264, MPG, VOB, RM, RMVB, DV, ASF, XViD, HD Video Formats (AVI HD, MP4

VIP Video Converter User Guide 126

VIP Video Converter http://www.vip-video-converter.com