videofied remote application notes 2013... · videofied has developed a smartphone application for...
TRANSCRIPT
www.videofied.com
Videofied has developed a smartphone application for arming and disarming Videofied alarm panels that are configured to
communicate using GPRS. The Videofied Remote is available for Android, Blackberry, and Apple mobile operating systems.
Requirements:
> X Series control panel (XT, XL, XTIP) with firmware version XLP.03.50.10.XXXX or newer. The version is listed on the
product box, on the product label, and can be determined from the keypad by pressing the zero key six times followed by
YES/OK.
> IMPORTANT: The control panel must be powered by an external power supply with battery backup. If external power is
lost the SMS feature will automatically disable after 30 minutes.
> XTIP control panels must have connection strategy set to ETH+GPRS or GPRS. Videofied Remote is not functional
when configured for ETH connection strategy only.
> Ringtone must be set to AUTO with a minimum 30min Delay Before Off.
> SMS Decoding must be set to ENABLED.
> For reply that the action was received by the panel SMS REPLY must be set to ENABLED.
T E C H N I C A L A P P L I C A T I O N N O T E
Videofied Remote
Manufactured by RSI Video Technologies July 2012
T E C H N I C A L A P P L I C A T I O N N O T EVideofied Remote
Additional Configuration: These parameters must be configured in order to use the Remote App.
DATE / TIME
DISARMED LVL: 1
PROGRAMMABLE
FEATURES
SMS
SMS DECODING
Enabled/Disabled
SMS REPLY
Enabled/Disabled/Status-Version
Enabled: Enables remote arming or disarming
Disabled: Disable remote arming or disarming
Enabled: Enables feedback SMS message to Videofied
Remote Application (SMS charges apply)
Disabled: Disable feedback SMS message
Status/Version: Enables feedback only status SMS message
to Videofied Remote application (SMS charges apply)
Note: The SMS menu will require the system to be in Access Level 4
DATE / TIME
DISARMED LVL: 1
CONFIGURATION
GENERAL PARAMETERS
GPRS PARAMETERS
RINGTONEOff: GPRS Modem will only be on when attempting to transmit a signal
Auto: Turns the modem always on so that it can receive the command from the Remote App at any time.
Note: The Ringtone menu will require the system to be in Access Level 4
DELAY BEFORE OFF
30 MIn
Keep the default of 30 min. This is the ammount of time the modem will stay on after DC power is lost on the system.
After turing Ringtone to Auto
you must send one signal over
GPRS before attempting to send
a command from the Remote
App. This will ensure the modem
is on and stays on.
www.videofied.com
T E C H N I C A L A P P L I C A T I O N N O T EVideofied Remote
Accessing Videofied Remote: Locate the Videofied icon and click to activate application.
Entering a new account into Videofied Remote: The application supports remote control for up to 200
Videofied systems.
1. Open the Videofied Remote app and swipe to the left or right to access the Manage section.
2. Press the New button. The app will prompt for the following information.
A. Name: Make sure to enter a name that gives a good description for the account to make it easy to understand which
system is being remote controlled.
B. Phone #: Enter the phone number of the SIM card installed in the control panel. This must include the
area code and any preceding characters for calling long distance or international.
C. Account #: Enter the account number of the control panel. This must be the account number that is programmed
into the control panel.
D. Feedback Phone #: Enter a phone number that you would like the confirmation SMS message sent to. This field is optional.
If it is not filled and the panel is configured to send the confirmation back it will send it to the phone
number the message was sent from.
3. Press Save when information for all entries are complete.
1.
2. C.
A. B.
D.
3.
Android
Blackberry
Apple
www.videofied.com
T E C H N I C A L A P P L I C A T I O N N O T EVideofied Remote
How to Arm/Disarm with the Videofied Remote:
1. Open the Videofied Remote app. Swipe
left or right to the Remote section.
2. Select the account to be remote
controlled from the account list.
3. Choose the command to be sent:
Arm,Disarm. The app will prompt for a
valid user code. Type the code and press
OK.
4. The app will confirm that the message
is sent with a pop up screen.
www.videofied.com
T E C H N I C A L A P P L I C A T I O N N O T EVideofied Remote
How to Arm Special Modes with the Videofied Remote:
1. Open the Videofied Remote app to the
Remote section.
2. Select the account from the Account
List.
3. Select SP1 or SP2. The app will prompt
for a valid user code. Type in the code and
press OK.
4. The app will confirm that the message
is sent with a pop up screen.
Note: Disarming through the Videofied Remote is the same no matter the profile the system is currently
armed in.
www.videofied.com
Remote Section Overview:
Arms the system selected
account in Fully Armed profile.
Fully disarms the system from
any arming profile.
Arms the system for the
selected Account in the SP1
profile. *The SP1 profile
must be configured during
installation.
Arms the system for the
selected Account in the SP2
profile. *The SP2 profile
must be configured during
installation.
Manage Section Overview: Add, delete and edit accounts.
Creates new account entry Edits the selected existing
account
Deletes the selected account
T E C H N I C A L A P P L I C A T I O N N O T EVideofied Remote
T E C H N I C A L A P P L I C A T I O N N O T EVideofied Remote
Frequently Asked Questions:
Q1. How do I determine the arm / disarm status of the control panel?
A1. The system cannot send back current status but will send back confirmation of a state change. In order to verify the system is
armed or disarmed send the arm or disarm command to the panel to receive response. SMS REPLY must be set to ENABLED.
Q1. Can I request a video from the Videofied Remote App?
A1. It is not possible to perform look-in or request video from the Videofied Remote App.
Q1. How do I get a new version of the Videofied Remote App?
A1. All updates are pushed through the mobile operating system app store.
Q1. How many accounts can I control with my app?
A1. The Videofied Remote app supports 200 systems.
Q1. Can I monitor my control panel with the Videofied Remote App?
A1. No, the system must still be monitored by a certified 24 hour monitoring station.
EMEA SALES23, avenue du Général Leclerc92340 BOURG-LA-REINEFRANCEHotline: +33 (0)820 846 620Fax: +33 (0)1 82 69 80 10
© 2011 RSI VIDEO TECHNOLOGIES. VIDEOFIED® is a Registered Trademark of RSI VIDEO TECHNOLOGIES. S2View® is a registered trademark of RSI VIDEO TECHNOLOGIES. Specifications subject to change without notice.
USA SALES1375 Willow Lake Blvd. #103Vadnais Heights, MN 55110USAHotline: +1 877 206 5800Fax: +1 651 762 4693
www.videofied.com