video/dc ↔ elc all menu value reset return camera default all value init & reset state icon...

<OSD functions>

This menu exitEXIT

This Menu default value returnINITIALIZE

Not available000 to 3FFLL PHASE SET

Auto Gain Control maximum gain set.

Up : image sensitivity up, noise up

Down : sensitivity down, noise down

-3,-2,-1,0,1,2,3AGC MAX SET

Anti illumination power flicker mode

(Use on ELC LENS type)

ON/OFFFLICKERLESS

Exchange electronics shutter speed

(Use on DC/VIDEO LENS type)

AUTO /

1/60 to1/10,000

SHUTTER SPD

Back light compensation mode ON/OFFBACK LIGHT C

Image brightness up down-3,-2,-1,0,1,2,3BRIGHTNESSEXPOSURE

Anti luminance color rolling displayON/OFFROLLINGLESS

WB MANUAL blue gain up down-3,-2,-1,0,1,2,3BLUE CONT

WB MANUAL red gain up down-3,-2,-1,0,1,2,3RED CONT

White balance

Push auto : large color temperature

Auto : Auto Tracking W/B

MANUAL : RED/BLUE control

PUSH AUTO / AUTO / MANUAL

AUTO WBC.BALANCE


Black & White image displayON/OFFBLACK & WHITE

This menu exitEXIT


This menu exitEXIT

Image mirror display ON/OFFMIRROR

Display Monitor Gamma value adjustment

Up : light , Down : dark

Gamma value 0.45 to 1

-3,-2,-1,0,1,2,3GAMMA

High light something black mask image display

LOW / MID / HIGH / OFF

HLBM

Image negative display ON/OFFNEGATIVE

Alarm signal output enableON/OFFALAEM OUT

Image sharpness (Aperture Gain) up / down

Image resolution up / down

-3,-2,-1,0,1,2,3SHARPNESSEFFECT

DescriptionSELECT2’ND MENU1’ST MENU

65 to 75

50M UNDER/100M/600M/1KM/MANUAL)

ON/OFF Use RJ45 LAN cable modeUTP SETUPUTP

LAN cable length settingCable length 50m under / 50m to 100m100m to 600m / 1km overMANUAL -> changed by M.LEVEL

CABLE SET

Cable set manual level changeM.LEVEL


This menu exitEXIT

-3,-2,-1,0,1,2,3

-3,-2,-1,0,1,2,3

↔

V.MOVE/H.SIZE/V.SIZE/H.MOVE

ON/OFF

1 to 8

ON/OFF Privacy mask displayDISPLAYPRIVARCY

Mask select (total 8EA)MASK NO

Each mask display on offMASK SET

Mask size change and move selectMOVE/SIZE

Change value selected move or size for mask

ADJUST

Mask color changeCOLOR

Mask hue changeBRIGHT

This menu exitEXIT

EXIT

INITIALIZE

FILTER TEST

Day or Night sensing method

Off : not action

CDS USE : used cds sensor device

AGC USE : used camera auto gain

control value

OFF/CDS USE/AGC USE

TRUE D/NDAY / NIGHT

Only FILTER B/W off

Change point set Go to black & white image start

-3,-2,-1,0,1,2,3BW START

Only FILTER B/W off

Change point set Go to color image

-3,-2,-1,0,1,2,3BW END

Low light aperture gain down point-3,-2,-1,0,1,2,3SPRS START

Recover aperture gain point-3,-2,-1,0,1,2,3SPRS END

Go to black & white Image in filter removal change time.

ON/OFFFILTER B/W

TDN Filter action delay time setting0 to 60 SECFILTER DELAY

This menu exit

This Menu default value return

TDN filter change actionACTION


VIDEO/DC ↔ ELC

All Menu value reset

Return Camera default all valueINIT & RESET

State ICON display enable (1minute)1MIN ↔ OFFSTATE DISPLAY

Lens type set

ELC : Electronics shutter speed light control lens

VIDEO/DC : Auto DC iris lens

LENS TYPE

This menu exitEXIT


ID display (show / hidden) SHOW/HIDECAMERA ID

Camera ID settingOFF/ 1 to 255CAM ID SETOSD

<State ICON DISPLAY>

Character select and setSETCHAR SET

User character display (show / hidden) SHOW/HIDEUSER CHAR


Setting state is displayed for 1 minute after power on when “state display” is “1MIN”

☼ : displayed when backlight compensation mode is ONFLK : displayed when flickerless mode is ONAWB : displayed when Auto Tracking White Balance mode is ONROL : displayed when color-rollingless mode is ONBW : displayed when Black & White mode is ONTDN : displayed when TDN mode is ON(CDS USE/ AGC USE)MR : displayed when MIRROR mode is ONSHUT : display shutter speed

video/dc ↔ elc all menu value reset return camera default all value init & reset state icon...

Documents