victorian chemical company pty. limited agricultural 35 agricultural product... · victorian...
TRANSCRIPT
AgriculturalProduct RangeVictorian Chemicals manufactured its first product for agriculture in 1939, Voullaires Ee-Muls-Oyle; this is now the leading Fruit Drying Oil in the Sunraysia Region (Mildura). Since then, our knowledge of oils and surfactant chemistry and manufacturing capability has increased significantly. This has been instrumental in the development of our product range. These products, including the well known spray adjuvants Hasten and Hot-Up, are designed to assist the agricultural industry in its drive for higher productivity and value. Victorian Chemicals remains committed to providing our customers with quality products, and service that is both professional and friendly. We will continue to develop; our understanding of our customers’ requirements, the operations of our company and our technical expertise.
National Sales Manager-Agriculture Mr Chris Barry 83 Maffra Street, Coolaroo, Victoria 3048Email: [email protected] Phone: 03 9301 7003Fax: 03 9309 7966Mobile: 0427 129 572
Victoria
Product Development ManagerMr Peter Jones83 Maffra Street, Coolaroo, Victoria 3048 Email: [email protected]: 03 9301 7059Fax: 03 9309 7966Mobile: 0411 591 414
Victoria
Sales ExecutiveMr Graeme Hackett PO Box 94, Wagga Wagga, NSW 2650 Email: [email protected]: 02 6971 0400 Fax: 02 6971 0411 Mobile: 0428 710 400
Southern New South Wales
Sales RepresentativeMr Stuart England Email: [email protected] Mobile: 0418 877 765
Northern Queensland
Sales Executive-HorticultureMr Geoff Cox83 Maffra Street, Coolaroo, Victoria 3048Email: [email protected] Phone: 03 9301 7058 Fax: 03 9309 7966Mobile: 0418 128 392
Victoria
Sales ExecutiveMr Mick Bellenger P.O. Box 739, Gawler, S.A. 5118 Email: [email protected]
Fax: 08 8522 5710Mobile: 0400 861 988
South Australia
Sales RepresentativeMr Dugald Macfarlane PO Box 857, Warwick, QLD 4370 Email: [email protected]
Mobile: 0421 901 424
Northern New South Wales / Southern Queensland
Perth Adelaide
Melbourne
Wagga Wagga
Warwick
Innisfail
Devonport
Victorian Chemical Company Pty. Limited83 Maffra Street, Coolaroo, Victoria 3048, AustraliaTelephone: (03) 9301 7000 Facsimile: (03) 9309 7966 Website: www.vicchem.com Email: [email protected]
Disclaimer: Victorian Chemical Company Pty. Ltd. has taken all reasonable care in preparing the information contained in the bulletin. However because the use of this information is beyond our control, Victorian Chemical Company Pty. Ltd. accepts no responsibility for any consequences whatsoever arising from the use of this information except responsibility imposed under any applicable law.
Disclaimer
AGR35 211210
Sales RepresentativeMr David Rann Email: [email protected]
Mobile: 0437 120 937
Tasmania
Sales RepresentativeMr Peter Julian P.O. Box 228, North Beach, W.A. 6920 Email: [email protected]
Phone/Fax: 08 9445 9978 Mobile: 0438 773 171
Western Australia
Sales RepresentativeMr Max Julian P.O. Box 228, North Beach, W.A. 6920 Email: [email protected]/Fax: 08 9243 1190 Mobile: 0412 047 130
Western Australia
ViCol† SuMMER oil - insecticideSuccessfully used by growers for over 20 years for the management of insects and disease in their crops. Suitable for use throughout the year when used according to the label. BFA approved*
Highly refined Petroleum Oil (USR >92%) and Surfactants
20L200L1000LBulk
ViCol† WiNTER oil - insecticideDesigned for use only on trees and plants that are completely dormant, this product provides cost effective control of certain insect pests.
Refined Petroleum Oil and Surfactants
20L200L1000LBulk
GAlA† - Growth Regulator Gibberellic Acid (GA
3) in Ethyl
Oleate and SurfactantsA unique non-flammable and non-poisonous liquid formulation of Gibberellic Acid for use as a foliar spray to promote beneficial effects on grapes, prunes and citrus, and to stimulate winter growth in grass based pasture. (registration pending)
1L10L
BloAT PASTuRE SPRAy† - A compound to aid control of Bloat in CattleParaffinic Oil and Surfactants 20L
200LApplied to Pastures prior to grazing and for oral drenching cattle that have developed Bloat
Description Key Benefit(s) Packaging
BloAT DRENCH† - oral Bloat ControlVery effective and reliable product for preventing Bloat by oral drenching or using in drinking troughs.
20L200L
Selected Nonionic Surfactants
Animal Health
DEluGE† loW FoAM - Wetting AgentDesigned for low phytotoxicity potential and to improve spray results by assisting retention, wetting and spreading of spray droplets and improved uptake of agrichemicals.
A low foaming 60% Nonionic Surfactant for high value crops
10L20L200L1000L
*BFA - Biological Farmers Association approve for use by certified organic growers
Description Key Benefit(s) Applications Packaging
HASTEN† - Spray Adjuvant
Spray Adjuvants
Widely cross labeled with leading Herbicide products, HASTEN has excellent surface penetration capabilities and is suitable for use with most agrichemical products and in a wide range of spray conditions. BFA approved*
20L110/120L1000L
HerbicidesInsecticidesFungicidesDefoliants
Esterified Vegetable Oil (Ethylated) and Nonionic Surfactants
†
HoT-uP† - Spray AdjuvantA blend of Ammonium Sulphate, Nonionic Surfactants and Mineral Oil
Designed to enhance the performance of Glyphosate and other knockdown herbicides in adverse conditions; hard water protection, hot conditions and difficult to wet weeds.
20L110/120L1000L
Non-Selective Herbicides
†
SPRiNTA† - Superwetter100% organo silicone Nonionic Superwetter
Assists retention of spray droplets and provides excellent coverage on target surface and penetration of active ingredients.
1L2.5L5L10L
HerbicidesInsecticidesFungicides
The Australian SolutionTM
SPRINTA™
SUPERWETTER
READ SAFETY DIRECTIONS BEFORE OPENING OR USING
ACTIVE CONSTITUENT: 1020 g/L POLYETHER MODIFIED
POLYSILOXANE
A non-ionic wetter, spreader, penetrant for use with agricultural pesticides.
SPRINTA improves your spray results by;assisting retention of spray droplets on target surfaceincreasing wetting and spreading of spray droplets
assisting uptake of pesticides
†
WET-AS† - Spray AdjuvantA blend of Ammonium Sulphate and Nonionic Surfactants
Minimises the detrimental effects of hard spray water on susceptible herbicides eg. Glyphosate, increases spray droplet coverage on weed surfaces and acts as a compatibility agent in tank mixes
20L110/120L1000L
Herbicides
The Australian SolutionTM
WET-AS™
SPRAY ADJUVANT
READ SAFETY DIRECTIONS BEFORE OPENING OR USING
ACTIVE CONSTITUENT:410 g / L Ammonium Sulphate158 g / L Non-ionic Surfactant
Ammonium Sulphate and Nonionic Surfactants toassist the effectiveness of Glyphosate and reduce
tank mix incompatibility or antagonism when mixedwith other knockdown herbicides
CONTENTS: 20 LITRES(or 5, 10, 110, 200, 1000 L)
†
iNBouND† - Spray AdjuvantHighly refined Mineral Oil and a high concentration (20%) of Nonionic Surfactants
High loading of Surfactants improves retention, spreading and penetration of a wide range of agrichemicals.
20L110/120L1000L
Herbicides
†
AD-HERE† - Spray AdjuvantHighly refined Mineral Oil and Nonionic Surfactants
Highly refined mineral oil reduces the potential for crop phytotoxicity. Can be used as a bulking agent in low volume applications.
HerbicidesInsecticidesFungicidesDefoliants
20L110/120L1000LBulk
†
EMPoWER† - Spray AdjuvantRefined Mineral Oil and Nonionic Surfactants
Excellent bulking and anti-evaporant agent in non-selective situations. HerbicidesInsecticides
20L110/120L1000LBulk
†
ENVoy† - Spray AdjuvantA blend of cationic Buffering agents, Nonionic Surfactants and Canola oil
The buffering system will improve the performance of knockdown herbicides, eg. Glyphosate, that are susceptible to unfavourable spray water pH conditions.
20L110/120L1000L
Non-Selective Herbicides
†
NExuS† - Spray AdjuvantEnhances spray droplet deposition on the target by improving retention and reducing evaporation rates. BFA approved*
20L 200L1000L
HerbicidesInsecticidesFungicides
Highly refined Canola Oil and Nonionic Surfactants
†
ASSERT† - Spray Adjuvant20L120L1000L
HerbicidesHigh strength liquid Ammonium Sulphate solution
Minimises the detrimental effects of hard spray water on susceptible herbicides eg. Glyphosate and acts as compatibility agent in tank mixes
iNFilTRAToR† - Spray AdjuvantINFILTRATOR has very good surface penetration capabilities that enhance active ingredient performance.
20L110/120L1000L
HerbicidesInsecticidesFungicides
Esterified Vegetable Oil (Methylated) and Nonionic Surfactants
TRuMP† - Spray oilDescription Key Benefit(s) Packaging
Very high purity parraffin oil designed to minimize phytotoxicity potential and assist growers in maximizing the value of their produce by killing pests directly and enhancing the performance of certain pesticide products. BFA approved*
Highly refined Paraffinic Oil (USR >98%) and Surfactants
20L200L1000LBulk
Speciality Products for Horticulture and Viticulture
†
HiTMAN† - Soap insecticideAn organically approved contact insecticide and wetting agent that has no withholding period and poses a low risk for users and the environment. BFA approved*
20L200L
Selected potassium soaps for soft bodied insect control
†
VoullAiRE’S† EE-MulS-oylE† - Multi-purpose Drying oilA premium emulsifiable oil product for drying grapes and other whole fruits. Promotes rapid drying which improves the appearance, texture and value of dried fruit. Components approved for use by the USA Food and Drug Administration. BFA approved*
20L200L1000L
Esterified Vegetable Oil and Surfactants.
†
†
The Australian SolutionTM
BUFF-IT™
SPRAY ADJUVANTACTIVE CONSTITUENTS:
545 g / L NON-IONIC FATTY ACID ETHOXYLATES,383 g / L PROPIONIC ACID,
192 g / L TRIETHANOLAMINE
A wetting and spreading agent withpH buffering and indicator for use
with agricultural chemicals
BUFF-IT improves your spray results by;optimising pH of spray solution
assisting retention of spray droplets on target surfaceincreasing wetting and spreading of spray droplets
CAUTIONKEEP OUT OF REACH OF CHILDREN
READ SAFETY DIRECTIONS BEFORE OPENING OR USING
BuFF-iT† - Spray AdjuvantA blend of Nonionic Sufactants and Buffering agents with pH Indicator
Buffers spray water to pH range 4 to 5, contains an indicator which changes colour at pH 5, assists spray droplet retention, wetting and spreading on target surfaces.
5L20L110/120L1000L
†
For SOIL WETTING and WATER RETENTION
SOAK-N-WET†
KEEP OUT OF REACH OF CHILDREN
ACTIVE CONSTITUENTS:Wetting Agents and Water Retaining Polymers
Assists Plant Growth through:
• Fast absorption of water– reduces run off and loss
• Penetration of hard-to-wet soils– takes water to plant roots
• Retention of water– keeps water in the root zone longer
• Improved rewetting of soil– economic
SoAK-N-WET† - For Soil WETTiNG and WATER RETENTioNA blend of Nonionic Sufactants and Water Retaining Polymers
Assists wetting of even the most hydrophobic soils. Holds water in the root zone and can help prevent leaching of water and nutrients.
20L200L1000L
4 Colour Process
18113502 Infiltrator 120LVictorian Chemicals9/11/2010
454mm wide
94mm wide30mm wide17
5mm
dee
p
Fold
s ar
ound
cor
ner
330mm wide
Dieline
PMS 485
250509
PRODUCT DESCRIPTIONINFILTRATOR Spray Adjuvant is a methylated vegetable oil product with non-ionic surfactants for use as a Spray Adjuvant with a range of agricultural chemical products including herbicides, insecticides and fungicides.
IMPORTANTPrior to use, read all directions on this label and on the label of the agricultural chemical product being used.
MIXINGFollow the directions on the agricultural chemical product’s label. Fill spray tank one-half full of water and add the required amount of the agricultural chemical product while agitating. Add the required amount of INFILTRATOR followed by remaining water and continue agitation until completion of spraying. Do not mix products together before adding to spray tank.
COMPATIBILITYINFILTRATOR is compatible with a wide range of agricultural products, however all instructions on the agricultural chemical product’s label must be strictly followed.
CROP SAFETYRefer to the directions on the agricultural chemical product label. Caution must be exercised when applying INFILTRATOR with agricultural chemical products on sensitive crops during periods when plants are subject to drought stress, high temperatures or high humidity. If in doubt about the appropriateness of using INFILTRATOR, please test by application to a small area before using it on a full-scale basis.
SPILLAGEIn the event of spillage absorb onto sand or chemical absorbent. Remove residue with detergent and hot water. Dispose of by normal waste disposal methods conforming to local authority codes.
PROTECTION OF WILDLIFE, FISH, CRUSTACEA AND ENVIRONMENTDo not contaminate streams, rivers or waterways with the chemical or used containers.
NOTICE: Victorian Chemical Company Pty. Limited accepts no responsibility for any consequences whatsoever arising from the use of this product except responsibility imposed under any applicable law. The buyer assumes all risk and liability resulting from improper handling, storage or use and accepts and uses this product on these conditions.
APVMA Approval Number:56585/5-1000L/0309
CONTENTS: 120 LITRES
Date of Manufacture:
Batch Number:
DIRECTIONS FOR USEUSAGE RATE:
GENERAL DIRECTIONS
STORAGE AND DISPOSALKEEP OUT OF REACH OF CHILDRENStore in the closed, original container, in a well-ventilated area, out of direct sunlight. Triple, or preferably pressure rinse containers before disposal. Add rinsing to spray tank. Do not dispose of undiluted chemicals on site. If recycling, replace cap and return clean containers to recycler or designated collection point. If not recycling, break, crush or puncture and bury empty containers in a local authority landfill. If no landfill is available, bury the containers below 500mm in a disposal pit specifically marked and set up for this purpose clear of waterways, desirable vegetation and tree roots. Empty containers and product should not be burnt.
Refillable Containers: If returning containers for refill do not rinse, instead replace cap and return to designated collection point.
Avoid inhaling vapor or spray mist. When using the product wear protective clothing. After use wash thoroughly with soap and water. After each day’s use wash contaminated clothing. WHEN USING TOGETHER WITH OTHER CHEMICALS CONSULT THEIR SAFETY DIRECTIONS.
FIRST AIDIf poisoning occurs, contact a doctor or Poisons Information Centre (phone Australia 131126).
MATERIAL SAFETY DATA SHEETAdditional information is listed in the Material Safety Data Sheet which can be obtained from the supplier.
NOTICEVICTORIAN CHEMICAL COMPANY PTY. LIMITED accepts no responsibility for any consequences whatsoever arising from the use of this product except responsibility imposed under any applicable law. The buyer assumes all risk and liability resulting from improper handling, storage or use and accepts and uses this product on these conditions.
SAFETY DIRECTIONS
INFILTRATORS P R A Y A D J U V A N T
†SITUATION
Broadacre and Boom Spray
Aerial, CDA or ULV
Hand Gun
Knapsack
Tree OrchardPlantation Spraying
RATE
200ml - 1Lt/100L Water
200ml - 2 L/Ha
(SpotSpraying)150ml - 300ml Per 100L Water
15ml-20ml Per 10L Water
(High Volume)100ml - 200ml Per 100L
CRITICAL COMMENTS
Use the lower rate when using low application rate products
NOT TO BE USED FOR ANY PURPOSE OR IN ANY MANNER CONTRARY TOTHIS LABEL UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION.
ACTIVE CONSTITUENT:700 g/L Vegetable Oil Ester
A methylated Vegetable Oilproduct to assist the effectiveness
of Agricultural Chemicals
READ SAFETY DIRECTIONS BEFORE OPENING OR USING
Victorian Chemical Company Pty. Limited83 Maffra Street, Coolaroo, Victoria 3048, AustraliaTelephone: (03) 9301 7000 Facsimile: (03) 9309 7966Website: www.vicchem.com Email: [email protected]
CONTENTS: 120 LITRES
INFILTRATORS P R A Y A D J U V A N T
†
Dieline
PMS 485
PMS 306
4 Colour Process
16635304 Assert 20LVictorian Chemicals27/10/2009
AMMONIUM SULPHATE – SPRAY ADJUVANT
ASSERT†AMMONIUM SULPHATE – SPRAY ADJUVANT
ASSERT†READ SAFETY DIRECTIONS BEFORE OPENING OR USING
ACTIVE CONSTITUENT:417 g/L AMMONIUM SULPHATE
For use with Glyphosate based
herbicides to minimise antagonism
when tank mixing with flowable
herbicides
261009
Victorian Chemical Company Pty. Limited83 Maffra Street, Coolaroo, Victoria 3048, Australia
† Trademark used under licence
Telephone: (03) 9301 7000 Facsimile: (03) 9309 7966Website: www.vicchem.com Email: [email protected]
NOTICE: Victorian Chemical Company Pty. Limited accepts no responsibility for any consequences whatsoever arising from the use of this product except responsibility imposed under any applicable law. The buyer assumes all risk and liability resulting from improper handling, storage or use and accepts and uses this product on these conditions.
APVMA Approval No. 64030/5-1000L/0809
CONTENTS: 20 LITRES
Date ofManufacture:
Batch Number:
ASSERT should be used with non-selective herbicides only, as with some selective herbicides use may result in loss of selectivity and therefore crop damage. Ammonium sulphate may be corrosive to metal parts of the sprayer. Thoroughly flush tanks, pumps and nozzles with water after use.
Protection of Wildlife, Fish, Crustaceans and EnvironmentDO NOT contaminate streams, rivers or waterways with the chemical or used containers.
Storage and DisposalKEEP OUT OF REACH OF CHILDREN.Store in closed, original container, in a well-ventilated area, out of direct sunlight. Triple, or preferably pressure rinse containers before disposal. Add rinsing to spray tank or knapsack mix. Do not dispose of undiluted chemicals on site. If recycling, replace cap and return clean containers to recycler or designated collection point. If not recycling, break, crush or puncture and bury empty containers in a local authority landfill. If not available, bury the containers below 500mm in a disposal pit specifically marked and set up for this purpose clear of waterways, desirable vegetation and tree roots. Empty containers and product should not be burnt.
Returnable Containers (1000L): Empty contents fully into application equipment. Close all valves and return to point of supply for refill or storage.
Avoid contact with eyes and skin.
FIRST AIDIf poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 131126)
Material Safety Data SheetAdditional information is listed in the Material Safety Data Sheet which can be obtained from the supplier.
GENERAL INSTRUCTIONS
SAFETY DIRECTIONS
NOT TO BE USED FOR ANY PURPOSE, OR IN ANY MANNER, CONTRARY TO THIS LABEL UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION.
DIRECTIONS FOR USESITUATION
For use with all Glyphosate based herbicides to:1. Minimise antagonism to tank
mixes with flowable herbicides.
APPLICATION RATE
2L/100L spray solution
CRITICAL COMMENTS
1. Half fill spray tank with clean water and start agitation.2. Add ASSERT liquid through top opening of spray tank.3. With agitation still running, add the required flowable herbicide to the tank and mix thoroughly.4. Add the required amount of Glyphosate based product and the remaining water, mix thoroughly.5. Add surfactant, if required, near the end of filling process to minimise foaming.6. Always maintain adequate agitation during application and use the tank mix promptly.
454mm wide
175m
m d
eep
160mm wide 170mm wide 94mm wide30mm wide
Fold
s ar
ound
cor
ner
Dieline
PMS 485
PMS 202
16674705 Deluge Low Foam Wetting Agent 20LVictorian Chemicals8/10/2009
4 Colour Process
051009
WETTING AGENT
DELUGE LOW FOAM†
™
READ SAFETY DIRECTIONSBEFORE OPENING OR USING
Victorian Chemical Company Pty. Limited83 Maffra Street, Coolaroo, Victoria 3048, AustraliaTelephone: (03) 9301 7000 Facsimile: (03) 9309 7966Website: www.vicchem.com Email: [email protected]
† Trademark used under licenceNOTICE: Victorian Chemical Company Pty. Limited accepts no responsibility for any consequences whatsoever arising from the use of this product except responsibility imposed under any applicable law. The buyer assumes all risk and liability resulting from improper handling, storage or use and accepts and uses this product on these conditions.
APVMA Approval Number:59845/5 - 1000L/0709
CONTENTS: 20 LITRES
Date ofManufacture:
Batch Number:
ACTIVE CONSTITUENT:600 g/L NON-IONIC FATTY ACID ETHOXYLATES
A low foaming wetting and spreading agent for use with insecticides, fungicides and herbicides in
horticulture, grapevines, tree crops sugarcane, broadacre and other situations described in
Directions for Use
DELUGE LOW FOAM Wetting Agent improves your spray results by;
- assisting retention of spray droplets on target surface - increasing wetting and spreading of spray droplets
- improved uptake of pesticides
™
DELUGE LOW FOAM Wetting Agent is a bio-degradable spray additive containing 60% non-ionic surfac-tant for use with fungicides, insecticides and herbicides. It increases wetting, absorption and improved spray coverage. DELUGE LOW FOAM Wetting Agent can be used with both acid and alkaline sprays and mixes easily with all types of water. Prior to use, read all directions on this label and on the label of the pesticide(s) being used. The pesticide(s) label for specific usage and restrictions have precedence over directions for use referred to on this label. If in doubt about the appropriateness of using DELUGE LOW FOAM Wetting Agent, please test by application to a small area before using it on a full-scale basis.
MixingDELUGE LOW FOAM Wetting Agent mixes easily and quickly with water and should be added directly to the spray tank. It should not be added direct to undiluted sprays containing wetting agent.Unless otherwise directed by pesticide label, add DELUGE LOW FOAM Wetting Agent last to the spray tank.
Herbicide SpraysDELUGE LOW FOAM Wetting Agent can be added to all herbicide sprays to increase their efficiency except those which are known to contain adequate wetting agent in the formulations. A wetting agent should be added only where directed on individual labels, as use with selective herbicides outside label directions may reduce crop selectivity. For foliar active herbicides spray to the point where the leaves and stems are just wet. Spraying beyond this will encourage run-off, with obvious loss of spray chemicals. When spraying waxy or hairy leafed plants, which are typically hard to wet, increased activity will be obtained by increasing the rate of DELUGE LOW FOAM Wetting Agent. It is important that the leaves and stems are thoroughly wetted for foliar herbicides to work efficiently, particularly when treating dense, tall vegetation.
When using with a pesticide product, read the label of the pesticide product or products. Where a specific direction not to use wetting agent appears then do not use DELUGE LOW FOAM Wetting Agent. Where a specific usage rate of wetting agent appears, then that takes precedence over the general guidelines in the table below.
GENERAL INSTRUCTIONS
DIRECTIONS FOR USE
SITUATION
Horticultural, grapevine and tree crop sprays
Weedkilling spraysHigh volume power spraysLow volume boom sprayMisting machinesKnapsack
Paraquat and DiquatHigh volume power sprays, Boom sprayKnapsack
Soil residual herbicides eg. Diuron
Fire fighting - Water tank - Knapsack
RATE
10mL/100L
12mL/100L60mL/100L5mL/5L2mL/15L
200mL/100L200mL/100L30mL/15L
125-500mL/100L
10mL/100L2mL/100L
CRITICAL COMMENTS
Recommended for addition to all horticultural, grapevine and tree crop sprays except where formulation has sufficient wetter or where product directs not to add wetter.Use only when spray volume is at least 100L/ha
DELUGE LOW FOAM Wetting Agent can be used with herbicides in sugar, vineyards and orchard situations where direct contact with the crop is avoided
Under very high dilution rates for maximum efficiency, a higher rate of DELUGE LOW FOAM Wetting Agent is used to ensure even coverage of plant foliage and to increase absorption.
When applying to soil active herbicides such as Diuron to standing weeds, add DELUGE LOW FOAM Wetting Agent to thoroughly wet foliage. Consult product labels for individual recommendations.
DELUGE LOW FOAM Wetting Agent increases the wetting power of water which assists in quick control and mopping up of fires. In cases where water may not be readily available and a less drenching spray is needed, a tank full will cover a larger area.
Protection of Wildlife, Fish, Crustacea and EnvironmentToxic to aquatic organisms, although rapidly bio-degradable. Do not contaminate streams, rivers or waterways with the chemical or used containers.
Storage and DisposalStore in the closed, original container, in a cool, well-ventilated area. Do not store for prolonged periods in direct sunlight. Triple, or preferably pressure rinse containers before disposal. Add rinsing to spray tank. Do not dispose of undiluted chemicals on site. If recycling, replace cap and return clean containers to recycler or designated collection point. If not recycling, break, crush or puncture and bury empty containers in a local authority landfill. If no landfill is available, bury the containers below 500mm in a disposal pit specifically marked and set up for this purpose clear of waterways, desirable vegetation and tree roots. Empty containers and product should not be burnt. Refillable Containers: If returning containers for refill do not rinse, instead replace cap and return to designated collection point.
SAFETY DIRECTIONSAvoid contact with eyes and skin. When preparing product for use wear cotton overalls buttoned to the neck and wrist (or equivalent clothing), elbow length PVC gloves, face shield or goggles.
FIRST AIDIf poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 131126). If poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 131126). If in eyes, hold eyes open, flood with water for at least 15 minutes and see a doctor.
Material Safety Data SheetAdditional information is listed in the Material Safety Data Sheet which can be obtained from the supplier.
NOT TO BE USED FOR ANY PURPOSE OR IN ANY MANNER CONTRARY TO THIS LABEL UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION.
454mm wide
175m
m d
eep
160mm wide 170mm wide 94mm wide30mm wide
Fold
s ar
ound
cor
ner
Dimensions: 454 x 175mmScale: This label is 79% of full scale when printed onto an A3 pageDate: 05.10.09
WETTING AGENT
DELUGE LOW FOAM†
SAFETY DIRECTIONS
DEluGE† 1000 - Wetting AgentGeneral purpose surfactant to improve spray droplet retention, wetting and spreading on target surface for herbicides and pesticides as per their label instructions. BFA Approved*
5L20L110/120L1000L
HerbicidesInsecticidesFungicides
Nonionic Surfactant for agricultural use
†