vibe car audio 2012 product brochure
DESCRIPTION
The 2012 VIBE CAR AUDIO brochure has information and specifications on the entire VIBE product range.TRANSCRIPT
systemsI N T E G R A T E D
B R I T I S H A U D I O
2 0 1 1 L I N E U P
SPEAKERRANGE
SUBWOOFERRANGE
1.6”(41mm)3.7(93mm)
1.8”(46mm)4.5(114mm)
1.7”(44mm)5.6(143mm)
s10 s12 s15
4 6 57 692 693
1500 WATTSUP TO
CUSTOM-FIT COMPONENT
Slick 5 Comp Slick 6 Comp
Slick A0 Slick A1
Slick A0 Slick A1
80 watts
240 watts
40 watts RMS
B
5
+
Y30
480 WATTSUP TO
65
270 WATTSUP TO+
Component
AMPLIFIERRANGE
ENCLOSURERANGE
Slick Stereo 2
Slick Stereo 4
Slick Bass 1
2 Channel2.3” (58mm)7.9” (201mm)6.4” (163mm)2 x 75 watts2 x 100 watts1 x 200 watts
4 x 75 watts4 x 100 watts
N/AN/A
2 x 200 watts 1 x 400 wattsN/A N/A 1 x 600 watts
400 watts 800 watts 1200 watts20Hz - 20kHz 20Hz - 20kHz 10Hz - 500Hz0.1% 0.1% 0.1%HPF/LPF/FLAT HPF/LPF/FLAT LPF/Subsonic
50Hz - 750Hz 50Hz - 750Hz 40Hz - 220Hz
2.3” (58mm)10.3” (261mm)6.4” (163mm)
2.3” (58mm)8.8” (218mm)6.4” (163mm)
4 Channel Mono Bass Amp
Slick Channel 5
4 x 90 wattsN/A
1 x 300 watts 1 x 515 watts
1750 watts20Hz - 20kHz0.1%HPF/LPF/Subsonic
50Hz - 200Hz
2.3” (58mm)16.5” (420mm)
6.4” (163mm)
5 channel
10 12 15
Endcaps Input
2ch 4ch
1300 WATTSUP TO
1500 WATTSUP TO
for best results use
see accessories
stereo 2 stereo 4 bass1
ACTIVE
Labyrinth Slot PortN/A N/A
TWIN ACTIVE14.2” (360mm)15.7” (400mm)15.7” (400mm)
Slick 124Ohms
400 watts
1200 watts
deep smooth bass deep smooth bass
PowerBox™ Bass 1 Included
PowerBox™ Bass 1 Included
Slick Stereo 2Slick Stereo 4Slick Bass 1
Slick Stereo 2Slick Stereo 4Slick Bass 1
Slick Stereo 2Slick Stereo 4Slick Bass 1
Labyrinth Slot Port
14.2” (360mm)31.4” (800mm)
15.7” (400mm)2 x Slick 124Ohms800 watts
2400 watts
12
ACTIVE ENCLOSURE
ACTIVE ENCLOSURE
TWIN12
SPEAKERRANGE
AMPLIFIERRANGE
LiteAir 4
4
70 watts210 watts
35 watts RMS
Space Stereo 2Space Stereo 4
Space Stereo 2Space Stereo 4
Space Stereo 2Space Stereo 4
89 dB80Hz - 25kHz 60Hz - 25kHz 55Hz - 25kHz
1.3” (34mm)3.7” (93mm)
101mm
CMaterial
Weight
Rating
V
V
B
B
B
watts1 x 14,500 watts
1
10Hz - 500Hz
LiteBox Bass 1
1.8” (47mm) 8.2” (210mm) 7.1” (180mm) 1 x 400 watts 1 x 650 watts 1300 watts
35Hz - 500Hz
120dB
S
B
5 6
300 WATTSUP TO
4
NEO
Component
Alloy
Gasket
1300 WATTSUP TO
Bass 1
for best results use
see accessories
4
shallow ENCLoSURERANGE
ENCLOSURERANGE
1350 WATTSUP TO
Port plug
for best results use
see accessories
12
900 WATTSUP TO
LiteAir Auto 8A
LiteAir 8
300 watts900 watts
Tight Bass
PowerBox Bass 1
3.15“ (80mm) excl grill11.2“ (285mm)15.6“ (395mm)
Labyrinth Slot Port
LiteAir Auto 8
LiteAir 8
300 watts900 watts
Tight Bass
N/A
3.15“ (80mm) excl grill11.2“ (285mm)15.6“ (397mm)
Labyrinth Slot Port
LiteAir Compact 12
LiteAir 12
450 watts1350w
Tight Bass
PowerBox Bass 1
14.1“ (359mm)15.5“ (393mm)12.4“ (200mm)
8 Active 8 Passive
ACTIVE ENCLOSURE
ACTIVE ENCLOSURE
SPEAKERRANGE
SUBWOOFERRANGE
AMPLIFIERRANGE
88dB
2 Ohm DVC
50ozY35
50ozY35
10mm 10mm
2 Ohm DVC
1
10 12
BlackAir 1Tweeter1 -way38mm60w180w30w
90dB3.5KHz4 Ohm24mm50mm0.5” 12mmNeodymium0.3ozN35
4 x 100 watts4 x 150 watts
N/AN/A
2 x 300 watts 1 x 450 wattsN/AN/A N/A
1 x 750 watts
1200 watts 1500 watts20Hz - 20kHz 10Hz - 500Hz0.1% 0.1%HPF/LPF/FLAT LPF/Subsonic
50Hz - 750Hz 40Hz - 220Hz
2.1” (54mm)12.2” (309mm)6.5” (165mm)
2.1” (54mm)10.3” (262mm)6.5” (165mm)
4 Channel Mono Bass Amp
5 6
69
Stereo 4
Bass 1
1600 WATTSUP TO
Multi-Roll
Conesupport
FEA
FEMM
525 WATTSUP TO
Tri-axial
TweeterAttenuation
0dB -3dB
Y30
Component
Alloy
Gasket
Input
2ch 4ch
Endcaps2500 WATTS
UP TO
for best results use
see accessories
ENCLOSURERANGE
BlackAir Vented 12
BlackAir Vented 12 BLK
PowerBox Bass 1
14.7“ (375mm) 22.0“ (560mm) 15.6“ (397mm)
B
watts
watts
PowerBox Bass 1
14.7“ (375mm)22.0“ (560mm)15.6“ (397mm)
wattswatts
w
3200 WATTSUP TO
Port plug
BlackAir Bandpass 12
PowerBox Bass 1
14.7“ (375mm)22.0“ (560mm)16.8“ (427mm)
600 watts1800 watts
3200 WATTSUP TO
Port plug
TWIN
bandpass vented
Hybrid
1212 Black12
for best results use
see accessories
BlackAir Hybrid 12T
PowerBox Bass 2
14.7“ (375mm)37.8“ (960mm)15.6“ (397mm)
x 2
1150 watts3400 watts
SPEAKERRANGE
SUBWOOFERRANGE
120oz Y30
Space Bass 1
B
8.4“ (213mm)
Space 15 D2/D4
B
Space Bass 1
120oz Y30
1200 watts w
watts watts 3600 watts
600 watts RMS
20Hz - 500Hz
13.9“ (352mm) 7.4“ (189mm)
11.1“ (283mm)
Space 12 D2/D4
S
15
3D 5 6 12
390 WATTSUP TO
MECHANICAL
THERMALUNITY
3-wayComponent
TweeterAttenuation
0dB -6dB
12dB
Alloy
Gasket SUPER
Conesupport
FEA
FEMMMulti-RollPro
Terminal3600 WATTS
UP TO
AMPLIFIERRANGE
ENCLOSURERANGE
Space Vented 12
Space Vented 15
Space Vented 12 twin
Space Bass 1 Space Bass 1 2 x Space Bass 1 Strapped
6000 WATTSUP TO
Port plug
SPACE
12 12 twin15
2 x 100 watts2 x 150 watts
N/AN/A
1 x 300 watts 1 x 450 watts
N/A 1 x 1200 watts
N/A 1 x 750 watts
600 watts 2400 watts20Hz - 20kHz 10Hz - 500Hz0.1% 0.1%HPF/LPF/FLAT LPF/Subsonic
50Hz - 750Hz 40Hz - 220Hz
2.1” (54mm)9.8” (249mm)6.5” (165mm)
2.1” (54mm)13.3” (339mm)6.5” (165mm)
2 Channel Mono Bass Amp
1300 WATTSUP TO
Bass 1Stereo 2
for best results use
see accessories
SPEAKERRANGE
loudspeakerRANGE
ABSORBING
CONETri-axial
600 WATTSUP TO
900 WATTSUP TO
FEMMFEA
CLOTHD R I V E R
C O M P E T I T I O N
bullet tweeter coaxial
PRO - 4T PRO - 8M PRO - 10W PRO - 12
1-way 1-way 1-way 2-way
4” (100mm) 8” (203mm) 10” (254mm) 12” (304mm)
100 watts 200 watts 250 watts 300 watts300 watts 600 watts 750 watts 900 watts50 watts 100 watts 125 watts 150 watts107dB 93dB 94dB 93dB1.5kHz - 20kHz 65Hz - 7.5kHz 55Hz - 3.5kHz 45Hz - 20kHz
4Ω 4Ω 4Ω 4Ω
1.7” (65mm) 3.4” (85mm) 4.2” (106mm) 6.8” (173mm)3.4” (93mm) 7.3” (185mm) 9.25” (235mm) 11.2” (285mm)1” (25mm) 1.7” (44mm) 2” (50mm) 2.4” (60mm)
ferrite ferrite ferrite ferrite
20oz 40oz 44oz 50ozY25 Y25 Y25 Y25
BlackDeath Stereo 4 BlackDeath Stereo 4 BlackDeath Stereo 4 BlackDeath Stereo 4
component midrange component woofer
48
1012
AMPLIFIERRANGE
SubwooferRANGE
9Hz - 35kHz 10Hz - 500Hz 97dB
V
B
B
BlackDeathREAPER
BlackDeath Bass 1
BlackDeath Stereo 4
Mono Bass amp
-
4.4” (112mm) 39.4” (1000mm) 14.3” (363 mm)
-RMS @ 1 ohm stereo -
1 x 3200 watts1 x 6000 watts
29000 watts1 x 14,500 watts
10Hz - 500Hz 113dB
BUBONICStereo 4 Bass 1
CHIP
Input
2ch 4ch
10,000 WATTSUP TO
for best results use
see accessories
6500 watts
20,000 watts RMS3250 watts RMS90 dB
20Hz - 850Hz
QUAD 0.75 Ohm
13.9“ (352mm)11.8“ (299mm)
Unlimited
30mm
570ozY25
BlackDeath Bass Reaper
BlackDeath“Bubonic” 15
4” Edge wound
Competition SPL Subwoofer
20,000 WATTSUP TO
Reaper
BlackDeath 12
Dual 1 Ohm
9
B
B
watts1 x 14,500 watts
1
BlackDeath Bass 1
BlackDeathVented 1516.5” (420mm)
35.2” (895mm) 17.9” (455mm)
2500 watts 7500 watts 1250 watts RMS
B
SUPER
Cone support
FEA
FEMM
52) Parametric Bass Enhance variable frequency and bass boost
12dB
53) bass Enhance Boosts EQ to overcome road noise
54) Separate CrossoverSeparate crossover network that is superior to in-line filters
55) Separate 12dB CrossoverSuperior crossover network via steeper crossover slope
56) Active Crossover Superior sound via steep crossover
57) Super Slim Shallow mounting depth
58) Supercar Series Lightweight and compact, maximum performance minimum weight
59) Tweeter Attenuation Provides level adjustment for the tweeter output
60) 2 or 4 Channel Input All four channels can be driven from a two channel input
61) Mechanical Thermal Unity Increased heat dissipation
62) 3D Midrange and tweeter combine to produce 360o
sound
63) Competition SPL High performance SPL subwoofer
64) Reconeable The moving parts of the subwoofer can be replaced
Port plug 93) Active EnclosureSubwoofer enclosure with integrated amplifier
94) Acoustic Suspension Sealed enclosure offers high power handling
95) Bass Reflex Ported subwoofer enclosure delivers boosted bass response
96) Bandpass Benefits of a ported and sealed enclosure
97) Slot Port Rectangular port offers higher efficiency and increased SPL
98) Turboport Dual flared port for smoother airflow and cleaner bass
99) Port Plug Allows easy conversion from bass reflex to acoustic suspension
100) Variable Tuning Dual ported enclosure allows for three different tuning options
101) A.R.B.S.S. Anti Resonance Bass Support System
102) Box Grip Specially designed carry handle built into AR.B.S.S.
103) Dual Driver Subwoofer enclosure featuring twin subwoofers
104) Flat 13 High quality 13 AWG 100% OFC copper speaker cable
27) FEA Cone Cone designed using Finite Element Analysis to ensure maximum rigidity to weight
28) Cone Support Specially designed cone support adds rigidity without excessive weight
29) Single Spider Provides control and stability of the woofer cone
30) Dual Spider Control and stability of the cone with high power handling
31) Dual Voice Coil Dual voice coil offers multiple impedance options
32) FEMM Motor Provides low distortion and linear flux saturation
33) Alloy Torsion Basket Provides rigidity and support for motor and moving parts
34) Alloy Basket Machined, cast aluminium basket for high rigidity and support
35) Y30 Magnet Single Y30 rated magnet. Higher magnet ratings mean more power
36) Y35 Magnet Single Y35 rated magnet. Higher magnet ratings mean more power
37) Neodymium Magnet Provides high magnetic strength from a smaller, lighter magnet
38) Single Magnet Single ferrite magnet for high power handling
1) Rubber Gasket Ensures a perfect seal when mounting the speaker
2) Steel Mesh Grill Provides excellent protection for the speaker
3) Alloy Gasket Made from high quality machined aluminium
4) Alloy Gasket Made from high quality machined aluminium
5) ABS Grill Provides excellent protection for the speaker
6) PEI Tweeter Offers extended high frequency response
7) Silk Dome Super Tweeter Extended high frequency response up to 35kHz
8) TI Tweeter Titanium tweeter for extreme high frequency performance
9) Silk Dome Tweeter For smooth high frequency response
10) SCS SurroundNew cone surround for non circular cones
11) Inverted Surround Offers extended low frequency response
12) PU Surround Polyurethane offers fast, precise damping of the cone
13) PU Dualroll Benefits of PU with improved bass response
14) Highroll Surround Rolled tall to maximise cone area for higher SPL
15) Multi-Roll Achieves better linearity throughout the subwoofer’s excursion range
16) Seamless Surround Seamless look, greater strength
17) Dual Layer Surround 2 types of foam for cone speed and control
18) Absorbing PP Cone For increased depth and clarity of bass
19) IMPP Cone Rigid polypropelene woofer cone for smooth, low bass
20) Fibreglass Kevlar Cone Cone material made from fibreglass and Kevlar
21) Fibreglass Cone Fibreglass woofer cone for clarity of bass
22) Alloy Cone 0.15mm aluminium cone for excellent dynamics
23) One Piece PP Cone For increased depth and clarity of bass
24) Alloy Cone Aluminium cone delivers unmatched weight and dynamics
25) Poly-GlassCone material made from polypropelyne (PP) and fibreglass
26) Carbon Fibre ConeHigh sensitivity and low moving mass
39) Double Magnet Double stacked ferrite magnet for immense power handling
40) Magnet Boot Removable rubber boot for magnet protection
41) Spade Terminals Allows ease of installation
42) Screw Terminal Allows heavy gauge cable to be connected directly to the voice coil
43) Spring Terminal Allows ease of installation for heavy gauge cable
44) Pro Terminal Heavy gauge cable connects directly to the voice coil, easy series/parallel wiring
45) Co-axial Speaker 2-way speaker contains a woofer and built-in tweeter
46) Tri-axial Speaker 3-way speaker contains a woofer, mid-range and tweeter for better clarity
47) Tri-axial Speaker 3-way speaker contains a woofer, mid-range and tweeter for better clarity
48) Component Woofer and tweeter that can be mounted apart for a better sound stage
49) 3-way Component Seperate woofer, mid-range and tweeter provide better clarity
50) Speed Bass Extended low frequency response with high accuracy
51) Power Bass Large power handling for extreme SPL
65) ICC Vented Internal convection cooling technology from internally mounted heatsink fins
66) Pro Audio Superior audiophile sound quality
67) Class AB Low noise, minimal distortion for superior sound quality
68) Class D High efficiency amplifier ideal for bass
69) Class GH Quality of class AB with the efficiency of class D
70) Low Pass Filter Limits the amount of high frequency output
71) High Pass Filter Limits low frequency output
72) Subsonic Filter Limits very low frequency output
73) MOSFET High switching speed and greater stability
74) Chip Protection Microprocessor protects the amplifier
75) High Level Input Connect to speaker output of head unit
76) Remote Gain Amplifier gain can be controlled from the front of the vehicle
77) Strappable Combines the output of two amplifiers into a single channel
78) Linkable Connect two smaller amps to give the appearance of one large amplifier
79) Endcaps Hide amplifier wiring and terminals for improved aesthetics
80) Endcaps Hide amplifier wiring and terminals for improved aesthetics
81) Auto Sense Allows the amplifier to turn on and off without the need for a remote turn-on wire
82) Slick Loaded Slick subwoofer loaded into the enclosure
83) LiteAir Loaded LiteAir subwoofer loaded into the enclosure
84) BlackAir Loaded BlackAir subwoofer loaded into the enclosure
85) BlackDeath Loaded BlackDeath subwoofer loaded into the enclosure
86) N-Wedge Eliminates negative effects of sealed enclosure design
88) Modular Modular system allows single enclosures to be combined into a twin unit
87) N-Wedge Pro Second generation N-Wedge bass enclosure design
89) Pressure Wedge 2 Mount facing or away from passengers
90) Compact Compact enclosure delivers maximum performance in a minimum of space
91) Twin Post Spring loaded terminals
92) Quad Post Spring loaded terminals allow easy conversion from series to paralel wiring
feature LEGEND :
FLATFLEX™ High Definition speaker
cable The delivery of power and signal
to the speaker is the final CriticalLink™
in any audio system
Various lengths available
Bass
Cable
FLATBASS™ 13 SPK Bass speaker cable
There are many powerful bass amplifiers on today’s
market – the ever increasing power is putting huge
strains on speaker wire – VIBE present a new breed
of speaker cable specially developed for BASS
applications. The VIBE FLATBASS speaker cable offers
SolidCores™ that can handle and sustain considerably
more power than conventional speaker cable.
Model: FlatBass 13 SPK
– 13 gauge SolidCore™ flat BASS speaker cable
FLATSTEREO™ High Definition full range
Interconnect
The VIBE FLATSTEREO RCA is an OFC high definition
full range interconnect – delivering the fullest signal
possible from source to amplifier. The cable make
up has been developed to run flat with left and right
cables running parallel both with individual screening
but sharing an outer FLAT jacket, easing installation.
Available in:
Model: FLATSTEREO™ RCA 1m – 1 metre full range
interconnect
Model: FLATSTEREO™ RCA 5m - 5 metre full range
interconnect
FLATBASS™ – SolidCore™ Bass interconnect
The VIBE FLATBASS™ interconnect has been
specifically developed for use in BASS SYSTEMS - the
cable make up has a unique super FLAT™ design easing
installation - its trick ingredient is oversized SolidCore™
OFC signal wires - allowing a heavier voltage to be
passed down the cable. This is the central wire that
carries the main signal from source to amplifier.
Available in:
Model: FLATBASS™ RCA 1m – 1 metre BASS
interconnect
Model: FLATBASS™ RCA 5m - 5 metre BASS
interconnect
Power and
Ground Cable
VIBE FLATLINES™ power cable
has been
developed to maximise voltage
transfer from battery to amplifier.
High Def Speaker Cable
Model: FLATLINES 8 PWR – 8 gauge red power cable
Model: FLATLINES 8 GND – 8 gauge black power cable
Model: FLATLINES 4 PWR – 4 gauge red power cable
Model: FLATLINES 4 GND – 4 gauge black power cable
Model: FLATLINES 0 PWR – 0 gauge red power cable
Model: FLATLINES 0 GND – 0 gauge black power cable
FLATFLEX™ High Definition speaker cable
The delivery of power and signal to the speaker is the
final CriticalLink™ in any audio system. VIBE’s FlatFlex
OFC high definition speaker cable is produced from
super fine OFC copper strands collectively picking up
all the detail in your music. The multi strands are
aligned making the cable super FLAT™ which can be
run invisibly under carpets.
Available in:
Model: FlatFlex™ 16 SPK – 16 gauge High definition
flat flexible speaker cable
The VIBE 3000watt BASS KIT is
specifically designed to gain
maximum output from high power
BASS systems. Featuring the best
BASS specific cables from the VIBE
CriticalLink™ Range.
The VIBE 1500watt ACTIVE
BASS KIT is specifically designed
to gain maximum output from
high power Active Bass systems
(Bass Boxes). Featuring BASS
specific components.
• 5 Metre Flat 4awg OFC Power Cable
• 1 Metre Flat 4awg OFC Ground Cable
• 140 Amp Circuit Breaker
• 5 Metre 18awg Remote Wire
• 5 Metre RCA Cable
• Features Mag Plugs
• 3 Metre Flatbass 13 Speaker Cable
• Gold Terminals And Accessories
• 5 Metre Flat 8awg OFC Power Cable
• 1 Metre Flat 8awg OFC Ground Cable
• 60 Amp Agu Fuse & Fuse Holder
• 5 Metre 18awg Remote Wire
• 5 Metre RCA Cable
• Vibe Fast Plug
• Gold Terminals And Accessories
• 5m 8AWG power cable
• 1m 8AWG ground cable
• 5m VIBE SLICK RCA interconnect
• 5m remote turn on cable
• 2 x 5m FLAT16SPK 16AWG speaker cable
• AGU fuseholder
• 60 amp AGU fuse
• 2 x spade terminals
• 6pcs cable ties
The VIBE 1500 watt STEREO KIT
is specifically designed to gain
maximum output from high power
full range systems. Combining the
best full range cables from the
VIBE CriticalLink ™ range.
• Ideal For VIBE Stereo Amplifiers
• 5 Metre Flat 8awg OFC Power Cable
• 1 Metre Flat 8awg OFC Ground Cable
• 60 Amp Agu Fuse & Fuse Holder
• 5 Metre 18awg Remote Wire
• 5 Metre RCA Cable
• Features Mag Plugs
• 8 Metre Flatflex 13 Speaker Cable
• Gold Terminals And Accessories
• 5m 4AWG power cable
• 1m 4AWG ground cable
• 5m VIBE SLICK RCA interconnect
• 5m remote turn on wire
• 2 x 5m FLAT16SPK 16AWG speaker cable
• AGU fuse holder
• 80 amp AGU fuse
• 2 x spade terminals
• 6pcs cable ties
accessories
AGU Fuse Holder
Water proof Fuse holder to be located 12”
approx from battery – holds glass type AGU
fuses and offers reliable system protection. This
is included in stereo kits and active bass kits.
Model: FDAGU–V1 AGU fuse holder
VIBE FLAT Y 2M / FLAT Y 2F RCA Y leads
Our professional quality full range OFC Y-interconnect
guarantees a pure and strong signal. With a flat design
and ferrite loaded gold plated plugs, interference is greatly
reduced. The FLAT-Y Interconnect is available in
Model: FLAT Y 2F – RCA Y lead 1male to 2 female
Model: FLAT Y 2M – RCA Y lead 2male to 1female
VIBE DB6 non fused distribution block
The VIBE DB6 non fused distribution block is a profes-
sional non fused distribution block which gives easy
connection for up to 5 amplifiers.
Model: DB6 non fused distribution block
VIBE enclosure terminals
The VIBE enclosure terminals add a touch of class to any bass
enclosure. All new spring loaded connectors replace the old
screw down type for quicker and tighter clamping of speaker to
a mono amplifier.
Model: TP2 enclosure terminals - 2 posts
Model: QP4 enclosure terminals - 4 posts
VIBE CT0 / CT4 compression fit ring terminal
The VIBE CT range of gold plated ring terminals are profes-
sional compression fit, designed for maximum conductivity
Model: CT0 – 0 gauge compression fit ring terminal
Model: CT4 – 4 gauge compression fit ring terminal
VIBE AGU30, AGU60, AGU80 fuses
The VIBE AGU fuse series are the perfect companion to the VIBE FD4
distribution block and the Active and Stereo systems
Model: AGU30 – 1 pair 30 amp AGU fuses to fit all AGU fuse holders
Model: AGU60 – 1 pair 60 amp AGU fuses to fit all AGU fuse holders
Model: AGU80 – 1 pair 80 amp AGU fuses to fit all AGU fuse holders
Active amplifier remote
The optional remote control for the VIBE active amplifier
range takes control and tweakability to the next level.
Not only does the active amplifier give the user full
control over the amplifier gain but also the low pass
crossover filter allowing fine adjustments of both level
and frequency bandwidth from the front of the vehicle.
Model: BBR10 – optional remote for use with Bass 1,
Bass 2 active amplifiers
REM-2
BC10
Control your bassamplifiers gain
remotely with theBC10 levelcontroller
VIBE BC10 level controller
The VIBE BC10 gain level controller is a perfect
addition to any subwoofer system, The BC10 allows
the level of the amplifier to be controlled from the
driver’s seat, giving the user easy adjustment of
gain level whenever required, particularly useful for
adjusting the gain level for amplifiers controlling
subwoofers. The BC10 controller is RCA input and
output making it compatible with any system and
allowing gain level adjustment of any amplifier it is
connected to. It can also be used with full range
amplifiers to control the volume of front, rear
speakers.
Model: BC10 – RCA Gain level control
BASS remote
The VIBE bass remote allows bass boost adjustment of
the amplifier from the front of the car. Simply plug the
supplied cable into the remote port on the end panel of
the amplifier and remote bass boost control is yours, it is
that easy.
Model: SLICK REM2 – for use with Slick a0 a1
Model: BBR09 - BlackAir stereo 2 & stereo 4
VIBE 140 amp circuit breaker
Big systems require big protection. The VIBE circuit
breaker is rated at a massive 140 amps and offers
critical protection to your system – if the system over
powers or short circuits the breaker will cut in and save
your system
Model: CB140 – 140 amp circuit breaker
RCA MAG Plugs
Gold plated VIBE MagPlugs™ ensure that the signal is
passed from device to device with a high rate of
conductivity. MagPlugs™ are Ferrite Loaded™ and
feature rubber grips and an ultra small design allow-
ing easy installations.
Model: MP-V1
VIBE FD4 fused distribution block
The VIBE FD4 fused distribution block is a professional
AGU fused distribution block which gives easy
connection for up to 4 amplifiers.
Model: FD4 – 4 way AGU fused distribution block, 1 x
4gauge input 4 x 8 gauge outputs
VIBE RT4 / RT8 crimp on ring terminal
The professional range of VIBE RT ring terminals for
connecting power cable to the vehicle battery.
Model: RT8 – 1 pair of 8 gauge crimp on ring terminals
with PVC overboots
Model: RT4 – 1 pair of 4 gauge crimp on ring terminals
with PVC overboots
VIBE PortPlug
The VIBE PortPlug allows easy tuning of the VIBE EVO
bass enclosures. The PortPlug™ is used to tightly seal
the VIBE TurboPort™ in the enclosure.
Model: PP25 – PortPlug™ for 2.5” TurboPort™
Model: PP30 - PortPlug™ for 3” TurboPort™
The VIBE TurboPort™ is the only choice for professional vented
or bandpass enclosures.
Model: TPX25 – TurboPort™ 2.5” Diameter – 150mm Length
Model: TPX30s – TurboPort™ 3” Diameter - 150mm Length
Model: TPX30L – TurboPort™ 3” Diameter - 255mm Length
Model: TPX40s – TurboPort™ 4” Diameter - 240mm Length
Model: TPX40L – TurboPort™ 4” Diameter - 320mm Length
This line drivercan split one input
into three highvoltage outputs –
perfect for multichannel and
SPL systems.
Features
• New 1.5 farad capacitor has 50% more capacitance
than the previous model.
• New power distribution block allows 2 x 4 AWG
negative inputs.
2 x 4 AWG positive inputs and 2 x 8 AWG positive
inputs.
• Accurate digital voltage display with auto turn on/off.
• Lowest ESR of any capacitor on the market today.
• Can improve low end bass response in car audio
systems.
• Ideal for large bass systems that typically struggle
with poor current delivery from the battery.
Features
• Single stereo input with adjustable gain up to
20dB.
• Three stereo outputs with independently
adjustable gain up to 9 volts.
• Allows precise control of up to 12 amplifiers –
ideal for SPL systems.
• Isolated outputs provide clean sound with zero
crosstalk.
• Ultra low THD of only 0.015%.
• Excellent signal to noise ratio better than 100dB.
Bass Generator
The VIBE Fastplug is a quick release
car amplifier connector.
Ideal for use with active bass
enclosures, The VIBE fastplug
allows fast, safe, convenient removal
for when boot space is required.
IN
CLICK
OUT
!WARNING :
This product is capable of causing permanent
damage to your subwoofer and audio system.
VIBE will not be held responsible for any damage
caused to your audio system by the misuse of this
product.
vibeaudio.co.uk