viabizzuno exterior

7/17/2019 Viabizzuno Exterior

http://slidepdf.com/reader/full/viabizzuno-exterior 1/73

L i g h t i n g

P r e s e n t

a t i o n

- 2 0 1 4

CIRRUS LIGHTING EXTERIOR

mailto:[email protected]



13 x 8ceiling mounting light fitting with IP20 protection rating for

indoor use. made up of a H-shaped profile available in matt silver

anodized aluminium, it has a 13x8mm section and is long from

110 to 2110mm with a 100mm pitch. the lower part of the

extruded profile is lid with a cover to facilitate the wall-mounting

and has a polycarbonate diffuser at the top to ensure uniform

lighting. it has a amp.2 connector and is fitted with 3000K linear

led, 13W per meter 24Vdc.

1 3 x 8

1 3 x 8

Cirrus L ight ing T: 020 7193 2175 E: sa les@cirrusl ight ing.co.uk



16.64 Battiscopa IP6816.64 IP68 battiscopa is a white painted or matt silver oxidised

extruded aluminium profile with a right-angled triangular

section, the catheti of which measure 50 and 90mm, completewith polycarbonate diffuser. the profile is available in a length of

3011mm and is wired with a 3000K IP68 led kit in lengths of

510mm, 1010mm, 2010mm and 3010mm with relative powers

of 5W, 10,5W, 21W, 32W, or with an rgb led kit in lengths of

510mm, 1010mm, 2010mm and 3010mm with relative powers

of 9W, 18W, 36W, 54W powered with 24Vdc. supplied without

power supply units and rgb controls. triangular end caps in the

same finishes as the profile, a straight joint to connect several

profiles and power supply cable fitted with an IP68 connector

are available as accessories.

1 6 . 6 4 B a t t i s c o p a I P 6 8

1 6 . 6 4 B a t t i s c o p a I P

6 8




A4IP65 rated light fitting for external use, consisting of a floodlight

made of extruded aluminium with a section of 40x210mm,

suitable for installation on pole and wall using special

components, available in three models: 300, 600 and 900,

powder painted in antique brown, night black, scurodivals and

silver grey finishes. each model has three wirings powered at

24Vdc, equipped with 3000K leds and protected by an extra-

clear shockproof glass screen: 53W diffused light, for car parks

and parks; 47W with street light diffuser; 47W with

asymmetrical diffuser. the galvanised steel pole, with a section

of 80x80mmanchor it is available in three versions with the same

finishes as the floodlights: 4000mm, for a max of 2 floodlights;

6000mm, for a max of 4 floodlights at two heights; 8000mm, for

a max of 6 floodlights at three heights. the installation of the

floodlights on poles envisages the use of different types of

support: single, adjustable from 0° to 90°, for use only with the

300 floodlight; single fixed inclined by 5°, recommended for

wirings with asymmetric and street light diffusers; double fixed

inclined by 5°. the supports can be adapted to 60 and 76 mm

diameter poles using special accessories. the installation of the

floodlights on the wall envisages the use of two single

supports:adjustable from 0° to 90° and fixed inclined by 5°,.

A 4

A 4




Bacchetta MagicaIP65 lighting fixture for indoor and outdoor applications in

transparent UV resistant polycarbonate. it can be installed on

walls and ceilings and even in the suspended version, by means

of the apposite kit (l. 3000mm cable). HE version is available in

dimensions: : 945mm, 1545mm, 1640mm, 1845mm e 1940mm

and it is wired respectively for fluorescent lamps G5 14W, 28W

and 35W HE. HO version is available in dimensions: 945mm,

1545mm, 1640mm and it is wired respectively for fluorescent

lamps G5 24W and 54W HO.

B a c c h e t t a M a g i c a





Bacchetta Magica LEDIP67 rated interior and exterior light fitting in uv –ray resistant

transparent polycarbonate. it can be wall or ceiling mounted using

the appropriate hangers, supplied as standard, or suspended using

the appropriate kit (3000mm long). the bacchetta magica led is

fitted with a white 3000K diffusing led and is available in four sizes:

635mm, 935mm, 1235mm, 1535mm lengths with 9W, 13,5W, 18W

and 22,5W ratings respectively. the rgb led version with converter

allows the light to be modulated from white to various colour

gradations and is available in four sizes: 635mm, 935mm, 1235mm,

1535mm lengths with 12W, 18W, 24W and 30W ratings

respectively.

B

a c c h e t t a M a g i c a L E D

B a c c h e t t a M a g i c aL E D




Bacchetta Magica TerraIP40 floor-standing light fitting for interior and exterior use,

consisting of a 180x180mm natural steel base supplied with an

inclined coupling with a ball into which a bacchetta magica

1940mm long and 40mm in diameter made of transparent UV

resistant polycarbonate is fitted. wired with a 35W HE

fluorescent tube with G5 base, 240 V supply voltage, 1-10V

dimmable with power supply unit and dimmer included.


B a c c h e t t a M a g i c a T e r r a




Biblio Palolight fixture for outdoor use with polished stainless steel, antique

brown, night black, scurodivals or silver grey finishing. one or

two light sources can be installed on the 3000mm or 4000mm

high pole. they can take E27 max 150W halogen / led lamps, G12

70W metal halide lamps or GX24q-4 42W energy saving

fluorescent lamps. the safety frosted glass with gasket is

included, giving the lamp IP44 rating.

B i b l i o P a l o

B i b l i o P a l o




Biblio PareteIP44 wall lamp for interior and exterior use with polished

stainless steel, antique brown, night black, scurodivals or silver

grey finishing. biblio pr can take E27 max 150W halogen / led

lamps, G12 70W metal halide lamps or GX24q-4 42W energy

saving fluorescent lamps. the safety frosted glass with gasket is

included, giving the lamp IP44 rating.

B i b l i o P a r e t e

B i b l i o P a r e t e




Big Feet standing floodlight for indoors or outdoors made of peraluman

aluminium alloy. it features frosted or transparent glass and an

IP67 protection rating. it can take halogen, fluorescent or metal

halide lamps. louver, oblique light frame with transparent glass

(only for metal halide kits) and anti-glare ring (only for E27 kit)

are also available. impact test resistance at IK10 20J (Joules).

B i g f e e t

B i g F e e t




BilboIP55 rated wall and pole light fitting for indoor and outdoor use,

made of antique brown, night black, scurodivals and silver grey

painted aluminium. for the wall version, the bilbo g parete wired

with G12 70W or 150W lamp with and adjustable head of

diameter 300mm and bilbo p parete wired with G8,5 35W or

70W 8° or 40° lamp, or V led.t/80 efficency 3000K Ra80 24,7W

with an adjustable head of diameter 150mm are available. 240V

50/60Hz, including the power supply unit. for the pole version,

bilbo g and bilbo p with the same wiring and adjustable heads as

the wall version are available, excluding the power supply unit.

accessories: stainless steel stem suitable for fastening to the

ground or to a stake for installation in gardens.

B i l b o

B i l b o




C1IP20 modular system for indoor use in white or matt silver

oxidized extruded aluminium, available in recessed, ceiling and

suspended versions. the electrified modules, complete with

supply unit for T5 fluorescent tubes and polycarbonate diffusers,

are available in four lengths: 600mm, 900mm, 1200mm and

1500mm and are wired for G5 14W, 21W, 28W and 35W lamps.

being wired for the 'tutta luce' version, the power supply unit is

located inside the profile and the polycarbonate diffuser covers

the whole length of the electrified module, creating a continuousline of light. as well as the electrified modules, the following

items are also available: 50W dichroic kit, profiles and

connectors complete with cover and accessories (such as closing

caps and linear joints). the recessed version of C1 is wired also

for a 3000K white led or for rgb led with converter which allow

modulating the light from white to various shades of colour.

supply unit and rgb controls are not included. the led C1 is

available in the following lengths: 600mm, 900mm, 1200mm,

1500mm, with 18W, 27W, 36W, 45W ratings for the white led

and 12W, 18W, 24W, 30W for rgb led version.

C 1

C 1




C1 LED Also available IP68

IP20 recessed modular system for interior use in white or matt

silver oxidised extruded aluminium, complete with

polycarbonate diffuser, available in four sizes: 600mm, 900mm,

1200mm and 1500mm wired in the ‘all light’ version with 18W,

27W, 36W and 45W 3000K white leds, or wired with 10W, 15W,

20W or 25W rgb leds with 24Vdc power supply. supplied without

power supply units and rgb controls. for the version with white

leds it is also possible to use hollow profiles measuring 3011mm

and wire them with a 6000mm long strip led coil: 20W/m Ra80

2000lm/m, 13W/m Ra95 1150lm/m, 12W/m Ra80 1200lm/m,

6W/m Ra80 600lm/m 2700/3000/4000/5000K, while for the rgb

led version, there is a 6000mm long strip led coil with power of

14W/m, sectionable every 98mm, both powered at a voltage of

24Vdc. in addition to the electrified modules, there are: profiles

and fittings complete with cover and accessories (such as caps

and straight joints). a seal is available to give the profile a safety

rating of IP44 at the front and IP20 at the back (recessed).

C 1 L E D

C 1 L E D




C1 LED (IP68)Mario nanni 2003 IP20 recessed modular system for interior use

in white or matt silver oxidised extruded aluminium, complete

with polycarbonate diffuser. Available in four sizes: 600mm,

900mm, 1200mm and 1500mm wired in the ‘all light’ version

with 18W, 27W, 36W and 45W 3000W white leds, or wired with

10W, 15W 20W or 25W rgb leds with 24Vdc power supply.

Supplied without power supply units and rgb controls. For the

version with white leds it is also possible to use hollow profiles

measuring 3011mm and wire them with a 6000mm long strip led

coil: 20W/m Ra80 2000Im/m, 13W/m Ra95 1150Im/m, 12W/m

Ra80 1200Im/m, 6W/m Ra80 600Im/m 2700/3000/4000/5000K,

while for the rgb led version, there is a 6000mm long strip led

coil with power of 14W/m, sectionable every 98mm, both

powered at a voltage of 24Vdc. In addition to the electrified

modules, there are: profiles and fittings complete with cover and

accessories (such as caps and straight joints). A seal is available

to give the profile a safety rating of IP44 at the front and IP20 at

the back (recessed).

C 1 L E D

C1 L E D


C



CampanulaIP44 rated wall outdoor lamp.campanula consists of extruded

aluminium in the peculiar and graceful shape of a mountainflower, after which it is named. it is available in antique brown,

night black, scurodivals or silver grey finishes and it can be fixed

to a wall with a specially provided rose. wired for E14 halogen or

with 8W 3000K 26° 800lm leds. control gear included.

C a m p a n u l a

C a m p a n u l a


C



Cantilever recessed telescopic lamp IP44. it is wired with an electronic

power supply unit for G5 fluorescent tubes for 14W and 28W

and respectively 950mm or 1550mm long. it is supplied with its

own housing.

C a n t i l e v e r

C a n t i l e v e r


C



Catenaria Di Luce SerpentineIP44 suspension light fitting for outdoor. realized with a 25mt

long electric wire, on which con be applied, to the desireddistance, 3000K 4W 24Vdc led light sources or 25W 24Vca light

bulbs. led light sources are available in different models: with

sandblasted glass for a diffused light, with adjustable spotlight or

fixed spotlight for accent light, power supply max100W not

included. it is also possible to use 24V light bulbs for diffused

light, power supply max 200W not included. all the versions can

be used with suspension wire of different length. it is not

possible to use both light sources on the same catenary.

C a t e n a r i a D i L u c e S e r p e t i n e

C a t e n a r i aD i L u c e S e r p e n t i n e


C



Cilindro PLindoor and outdoor light fixture IP44 for ceilings in polished

aluminium or white, grey, black or bronze painted finish, for E27

halogene par 20 or 30 lamps. not to be used with halopar

coolbeam lamps. pl 30 version can be also supplied with leadsfor fluorescent lamps, led or for metal halide lamps (complete

with ballast) with G12 socket. it is also available a pl 35 version

(dn.170mm) in polished steel or white, grey, black or bronze

painted finish. this can be wired for metal halide lamps with G12

socket, for GX24q-4 42W fluorescent lamps. it can be also used

as emergency light with 26W GX24q-3 fluorescent+emergency

kit. pr monoemission and double emission brackets for wall.

C i l i n d r o P L

C i l i n d r o P L


C



Cilindro Pr Staffawall light fixture for interior and exterior use IP44 made of

polished or white, grey, black or bronze painted aluminium. it isavailable in two versions: 200mm and 400mm with E27 lamps.

the pr 40 version is supplied with a double emission wiring kit.

not to be used with coolbeam lamps.

C i l i n d r o P r S t a f f a

C i l i n d r o P r S t a f f a


e C



Codega PlafoneIP44 ceiling lamp for indoor and outdoor use. codega is a lantern

made up of a satin finish aluminium structure which becomes a

handle, an opal polycarbonate diffuser and an aluminium base

varnished in my bianco or my nero. there are two versions: one

320mm high with a handle, and the other 240mm high-no

handle. both are wired for E27 15W 240V lamps. lamp included.

C o d e g a P l a f o n e

C o d e g a P l a f o n e

Contents

C



Codega Tavolotable lamp for for indoor and outdoor use, IP44, 320mm h.

codega is a portable lantern consisting of a satin finishaluminium structure which becomes a handle, an opal

polycarbonate diffuser and a rosewood or metal base varnished

in my nero which houses 1 x 3000K 4W battery-powered leds,

with an operating time of 10 hours. powered from the main it

can be used as an emergency lamp. the battery charger is

included. a version wired with a E27 15W 240V lamp is available,

lamp included.

C o d e g a T a v o l o

C o d e g a T a v o l o


C



Concreteilluminating bollards made of concrete for outdoors with IP55

protection. available in uplighter and downlighter versions intwo different heights: 1000mm and 540mm. concrete is able to

house halogen, metal halide and fluorescent kits to be

completed with special clear or frosted shockproof glass. for

concrete 1 bi –emission fluorescent and metal halide kits are

available. for a correct installation a ground plate is necessary.

C o n c r e t e

C o n c r e t e


5 C



Cornice IP55IP55 lighting fixture for indoor and outdoor applications in steel

grey or white painted. designed to be placed on capitals and

frames, takes it RX7s 70W metal halide lamps, complete with

electronic control gear unit, linear halogen lamp R7s 200W or

fluorescent with lamp GX24q –4 42W.

C o r n i c e I P 5 5

C o r n i c e I P 5 5


C



CorteIP65 floor-standing lamp for outdoor use, made up of a stainless

steel cylindrical core (diameter 50mm) and wired with 3000K,240V, power supply unit included. two blades, set together like

the pages of a book, revolve 350° around the central stem. there

are two versions with two different sizes: 500x680x60mm led

5W, 240x1180x60mm led 10,5W. the external structure is made

of aluminium painted white, the outer portion coupled with

mirror-polished stainless steel sheet. the unit can be secured to

the ground with round plate or with stake.

C o r t e

C o r t e


C



Cubi Bandiera Accessori the accessories in 316L stainless steel and in corten steel for

cubo bandiera allow a more flexible use of the fixtures; wall

mounting: by means of a flange enabling up to 120° rotation;

floor standing: a stake extends its use to gardens and balconies.

for outdoor use: the support makes it possible to fasten the

cubes (max. 3) onto poles (diameter 76mm in 316L stainless

steel, 80mm in corten steel).

C u b i B a n d i e r a A c c e s s o r i

u b i B a n d i e r a A c c e s s o r i


5 C u



Cubo 15IP65 light fitting for interior and exterior use In AISI 316L

polished or satin finish stainless steel and also In antiqued brass

for the ceiling version only, with transparent or frosted glass and

for fluorescent or incandescent lamps. it can be wall or ceiling

mounted or recessed, using a special flush –finish housing. in the

flag version, with adjustable bracket, the fitting can be directedas required; it can also be supplied with a stake for fixing Into the

ground or a flange for wall mounting which allows it to be

rotated up to 150°. when exposed to very salty environments or

weather conditions, the use of polished 316L stainless steel is

recommended. cubo 15 is also available in natural corten steel

that, if exposed to the open air, acquires a brown, self –

protecting oxidised coating, which changes in colour over time

depending on its exposure to the elements. if f itted indoors, the

corten steel will behave like ordinary carbon steel. the flag

version is supplied with a corten steel bracket.

C u b o 1 5u

b o1 5


0 C u



Cubo 30IP65 light fitting for interior and exterior use, made of AISI 316L

stainless steel. available in the ceiling and flag versions in the

following finishes: polished, satin-finish, antique brown varnish,

night black, scurodivals, silver grey, white. available transparent

or frosted glass it can take fluorescent, incandescent lamps, led.

available for the ceiling version also the antiqued brass finishing.

wall or ceiling light fixture, it can also be used as a recessed

fixture thanks to a special flush-finish housing. the flag version,

equipped with an adjustable bracket, allows adjustment of the

luminous flux of the appliance and can also be supplied with a

ground fixing stake or a flange to fasten it to the wall, allowing

up to 150° rotation. installation is also possible on luna nascente

using a special fixing bracket. with the emergency kit, thefluorescent+emergency kit and the special pictograms, cubo 30

can also fulfil signalling and emergency functions. in

environments and percentage the use of 316L polished stainless

steel is recommended. cubo 30 is also available in natural cor-

ten steel that, if exposed to the open air, acquires a brown, self-


depending on its exposure to the elements. if f itted indoors, the

cor-ten steel will behave like ordinary carbon steel. the flag

version is supplied with a cor-ten steel bracket.

C u b o 3 0u

b o 3 0


i a C u



Cubo DocciaIP65 light fixture in AISI 316L polished stainless steel withintegrated water supply (1/2”, pipe connectors not supplied),

available with or without silicone nozzles. it is available in

medium (155x155mm) and large (155x300mm) versions, wired

for dichroic GU4 20/35W lamp or for 3W led rgb or for a 4W

3000K white led, suitable for ceiling and flag use through special

components made of AISI 316L polished stainless steel, and for

recessed installation using the special housing. the light from the

emission duct crosses the water jet and provides effective

lighting in the area involved in the flow, creating suggestive light

and shadow effects.

C u b o D o c c iu

b oD o c c i a




e C u



Cubo Largelighting fixture for indoors and outdoors IP65 in AISI 316L. available

in the ceiling and flag versions in the following finishes: polished,satin-finish, antique brown varnish, night black, scurodivals, silver

grey, white and, for the ceiling version only, also in antique brass

finish. can be mounted on the wall or ceiling. the flag version,

equipped with an adjustable bracket, allows adjustment of the

luminous flux of the appliance and can also be supplied with a

ground fixing stake or a flange to fasten it to the wall, allowing up to

150° rotation. installation is also possible on luna nascente using a

special fixing bracket. wired for different kits: 32W GX24q-3 fluo,

and 70W G12 metal halide, with symmetrical and asymmetrical

optics, 45W PGZ12 with road optics, 70W G12 with road optics, led.road kits are provided with shock-resistant glass included; for the

other kits transparent, frosted, symmetrical or asymmetrical glasses

are available, shock-resistant IK09 (10 Joule) and 3mm pyrex and, as

accessory, with antiglare louvers. in environments and in weather

conditions with high salinity percentage the use of 316L polished

stainless steel is recommended. cubo large is also available in

natural cor-ten steel that, if exposed to the open air, acquires a

brown, self-protecting oxidised coating, which changes in colour

over time depending on its exposure to the elements. if fitted

indoors, the cor-ten will behave like ordinary carbon steel

C u b o L a r g e

u b oL a r g e


m

C u



Cubo MediumIP65 light fixture for interior and exterior applications made of

stainless steel AISI 316L. available in the ceiling and flag versions

in the following finishes: polished, satin-finish, antique brown

varnish, night black, scurodivals, silver grey, white and, for the

ceiling version only, also in antique brass finish. available

transparent or frosted glass, it can take halogen, fluorescent,

metal halide lamps and led. wall or ceiling light fixture. the flag

version, equipped with an adjustable bracket, allows adjustment

of the luminous flux of the appliance and can also be supplied

with a ground fixing stake or a flange to fasten it to the wall,allowing up to 150° rotation. installation is also possible on luna

nascente using a special fixing bracket. in an environment and in

weather condition with an high percentage of salinity the use of

polished stainless steel inox 316L is recommended. cubo

medium is also available in natural cor-ten steel that, if exposed

to the open air, acquires a brown, self-protecting oxidised

coating, which changes in colour over time depending on its

exposure to the elements. if fitted indoors, the cor-ten will

behave like ordinary carbon steel. the bandiera version is

supplied with a cor-ten steel bracket.

C u b o M e d i u m

u b o M e d i u m


t o C u



Cubo PalettoIP65 rated light fitting, for indoor and outdoor applications, in

AISI 316L polished stainless steel and in AISI 304 stainless steel in

antique brown, night black, scurodivals and silver grey finishes. it

is provided with shock resistant transparent or frosted glass, for

fluorescent or incandescent lamps (2x40W E14 incandescent kit,

24 and 36W 2G10 fluorescent kit, 18/24W 2G10 fluorescent +

emergency kit, 200W R7s-114 halogen kit and 70W RX7s metal

halide kit, led kit). it’s height from the ground is 600mm and the

light fixture head is angled at 22°. in environments and climatic

conditions with high saline content the polished 316L stainless

steel version is recommended.

C u b o P a l e t t

u b o P a l e t t o


g e

C u



Cubo Paletto 15/Largefloor-standing lamp with IP65 rating for outdoor lighting, made

of AISI 316L stainless steel in the following finishes: antique

brown, night black, “vals” black, silver grey and corten. cubo

paletto 15 dimensions are 450x160x80mm while cubo paletto

large dimensions are 750x160x80mm. both versions are wired

for 10W, 3000K leds with champagne-coloured asymmetrical

diffuser. power supply unit, shock-proof glass and hot galvanized

steel anchor bolt.

C u b o P a l e t t o 1 5 / L a r g

u b o P a l e t t o1 5 / L a r

g e


X L

C u



Cubo XLlight fixture for interiors and outdoors with IP65 protection in AISI

316L polished. available in the ceiling and flag versions in the

following finishes: polished, satin-finish, antique brown varnish,

night black, scurodivals, silver grey, white. can be mounted on the

wall or ceiling wired for different kits: 150W RX7s-24 metal halide,

8° and 24° 70W and 150W G12 metal halide, stradale 70W and

150W G12 metal halide with road optics, stradale 60W and 90W

PGZ12, led. road kits are provided with shock-resistant glass

included; for the other kits transparent and frosted glasses are

available, shock-resistant IK09 (10 Joule) and 3mm pirex. in very

salty environments and climatic conditions, the use of the 316Lpolished stainless steel version is strongly recommended. cubo XL is

also available in natural cor-ten steel that, if exposed to the open

air, acquires a brown, self-protecting oxidised coating, which

changes in colour over time depending on its exposure to the

elements. if fitted indoors, the cor-ten will behave like ordinary

carbon steel. the bandiera version is supplied with a cor-ten steel

bracket.

C u b o X b

o X L


l e i

D i s



Displei Also available in LED

Studio baciochhi 2010 recessed and fully concealed light fitting, IP20 or IP55

protection rated, designed for ceiling or wall mounting. Available in the finishes: my

bianco, silver, my nero, brown and polished chrome-plated. Available in two sizes:

displei dn-35 and displei dn50 which, in turn, include 6 different types: recessed

adjustable with springs, recessed adjustable with ring nut for rear fixing, adjustable

fully concealed, recessed fixed with springs, recessed fixed with ring nut for rearfixing and fixed fully concealed. The adjustable type (IP20) allows the lamp to be

positioned in four different heights (0, -7,+7, +14mm) inside the light fitting,

referred to the flush surface of the recessed area, and allows a 30 degree

adjustment along the longitudinal axis and a 355 degree rotation inside the light

fitting on the horizontal axis. The fixed type (iP55) allows the lamp to be positioned

in three different heights (0, +7,+14mm) inside the light fitting, referred to the flush

surface of the recessed area. Wired for 12V GU4 35W, GU5.3 50W halogen lamps,

for GX10 20/35W metal halide lamps and 3000K led.

D i s p ls p

l e i


0

F i 5



Fi 50IP67 floor, wall, ceiling and suspension light fitting for indoor and

outdoor use. fi 50 is a pirex glass cylinder that measures 2,8mm

in depth and 50mm in diameter available in four lengths 672,

972, 1272, 1472mm, equipped with end caps in electroless

nickel aluminium with 63mm diameter: one is a blind cap and

one is a cap IP68 4 with 4-poles male connector. for applications

in marine environement or in pools is available a stainless steel

316L version. it is wired with 28,5W white leds (672 mm length),42W (972mm length), 57W (1272mm length) and 66W (1472mm

length). for the entire length it is illuminated with three led

continuous light strips , each of them with a different colour

temperature: 3000K, 4000K and 5000K wired on a optic made of

anodised matt silver extruded aluminium with 36° or 18° beams.

the three colour temperatures can be controlled separately by a

remote system, so to obtain different luminous effects in the

whole available range of whites. accessories: suspension cables,

wall attachments and 'luce delle nuvole' control system.

F i 5 05

0


F E

G i r



GiraeFFeIP55 rated light fitting for outdoor applications in AISI 304

stainless steel, available in antique brown, night black,

scurodivals and silver grey finishes. it is 4500mm high, has an

accessible terminal board and various accessories may be fitted

to it, such as rubbish bins and wooden seats. the l ight fitting can

be installed at a height of 4375mm or 3735mm from ground

level. the two fittings can accommodate fluorescent kits or metal

halide kits with symmetrical, asymmetrical or road optics. thanks

to a bracket they can be mounted also to the ceiling. in the

bollard version rock bolt and 1W white led with power pack

included to create an accent light are supplied.

G i r a e F F

r a e F F e


t t a

L a S



La StrettaIP54 recessed light fitting for interior use, fitted with a led

lighting kit. the fitting is made of plaster and can be installed on

either plasterboard or brickwork walls, with the particular ability

to blend in with the surface on which it is mounted and the

option of finishing the outer surface in the same way as thesurrounding wall, using the same processes as for filling,

skimming and painting a wall. there are two versions: one with a

slit on the right side and one with a right cut and one with a left

cut. the final result is a section of wall, cut out, gently receding

inwards, as if creating a niche from which the light emerges. the

fitting does not have a preferred mounting position and can be

located anywhere on vertical and horizontal surfaces. the kit

supplied with the fitting consists of a blue or white 1W 3000K

led.

L a S t r e tS t r e t t a


m a

L a n



Lanterna MassimaIP55 light fitting for outdoor use, made up of a tempered extra

clear blown-glass vial and an brown painted aluminium mounted

on a pole that rises 4,5m from the ground, with a 102mm

diameter base that becomes a 60mm diameter on top. the head

of the pole is attached with a special clamp from which a brown

varnished steel pipe, shaped irregurarly, come to hold the

lantern, the lantern is available wired for G12 35/70W halide

lamps or PGZ12 45/60/90W, power supply units not included.

L a n t e r n a M a s s i m

n t e r n a M a s s i m a


i s

L e i s



Leislight fitting made of antique silver or antique brown oxidised

extruded aluminium; it can be mounted on the ceiling or semi-

recessed. the indoor version is wired with a G9 max 60W (IP20

rated) 240V 50-60Hz halogen lamp; the outdoor version (IP44

rated) is wired with a GY6.35 IRC max 50W 12V halogen lamp,

with a GU6.5 35W metal halide lamp (power supply unit and

transformer not included, to be housed in a remote place) and

with a 7W 3000K 240V 50-60Hz led source. safety glass included.

a fully concealed plaster housing is available to allow also semi-

recessed installation. leis is suitable for installation on normally

flammable surfaces.

L es


L e n



Lenticchiaceiling or hanging light fixture for interiors IP20 or IP44. thehand-blown glass diffuser, sanded inside and outside, is available

in three different sizes: 195mm, 400mm and 600mm. the

195mm version houses a low voltage ministar lamp 12V with

GY6,35 35W (ceiling), 50W (hanging) socket or 250V with G9

40W. the 400mm version houses 3 lamps with G9 40W socket

and 250V power supply or led 3000K 18W 1300lm. the 600mm

version houses 5 lamps with G9 40W socket or led 3000K 35W

2500lm. only for the suspension is available the wiring PGJ5

35W. either the fully integrated canopy or the ceiling canopy can

be used.

L e n t i c c h i a

n t i c c h i a


L i l i a



Liliafloor lamp for outdoor IP44 or IP55 in stainless steel AISI 316L

brushed and passivated. 4350mm high, is installed with proper

anchor bolt high 530mm and has a conical reflector with a

diameter of 460mm high 290mm. wired with a E27 lamp voltage

120W IP44 PAR38, or a metal halide PAR30 35W or 70W, control

gear IP44 not included, or a G8,5 35W or 70W IP55 8 °/40°, or

wired with V led.t/80 efficency 3000K (ra80 11,6W/350mA,

17,1W/500mA, 24,7W/700mA). remote control gear.

L i l i a

a


o l a

L u c c



Lucciolalighting fitting for indoors and outdoors IP67. it consists of a

carbon fibre stem, 1000/2000/3000mm high and dia. 5mm. it is

possible to fix it in the ground with a spike or on a 140x140mm

square base in nickel plated iron. the head is wired with a 1W

3000K white led on which it is possible to fit a clear glass diffuser

to create a seductive lighting effect, or a clear elastomer diffuser

particularly suited to outdoor use thanks to its thermal and

mechanical resistance. power supply unit not included.

L u c c i o

c i o l a


u s

L u c u



LucusIP65 rated light fitting for outdoor, available in versions 7768mm

and 4609mm high. it consists of 4 no. AISI 304 stainless steel

tubes 35mm in diameter and 3,5mm thick, painted in antique

brown, night black, ‘scurodivals’ and silver grey. at about 2/3 of

its height, the tubes spread apart to accommodate a lamp thatprovides diffuse ground lighting which may be a glass lantern

wired with G12 35/70W or PGZ12 45/90W lamp, or with bilbo g

wired with G12 70/150W lamp, power supply excluded. towards

the top, they come together again as a support for G8,5 35/70W

spotlights (max 4) that provide adjustable accent lighting for

façades, trees, details etc… at the base, the tubing sections fit

into a steel tube, which is set in a 900mm deep reinforced

concrete plinth. the pole is particularly suitable for use at historic

sites due to a shape that echoes that of historical lanterns.

L u c u

u s


e n t e

L u n a



Luna NascenteIP55 light fitting for outdoor use with a motorized system for

lighting buildings, monuments and large areas. luna nascente

(rising moon) is made of steel with antique brown, night black,

scurodivals or silver grey finishing. luna nascente works thanks to

a mobile linkage, that, by rotating 160° enables the chosen

outdoor use floodlight (max 25kg) to appear or disappear

according to necessity. it can be wired with the following

floodlights: 70W and 150W G12 8° and 24° metal halide

spotlight, 70W and 150W G12 metal halide road light or 60W

and 90W PGZ12 cosmopolis road light. the device can create

different scenarios thanks to an electronic control unit

interfaced with the appropriate software. single and double

versions are available both with a water parting stainless steel

element. the device is available in the ON –OFF simple dusk

switch version or with a intelligent control system with which it

is possible to position it at different pre programmed angles or

on local and/or remote pc programmed scenarios. it is also

possible to control the functioning of the device with a mobile

phone and to receive monthly emails containing the work data

(number of movements, hours of activity, planned maintenance

timing, possible occurred alarms)

L u n a N a s c ea

N a s c e n t e


r o

M1



M1 MicroMario nanni 1994 recessed IP20 or IP40 light fitting for interior use,

in white, grey and black coated metal. It can be installed in

plasterboard or brickwork walls using the appropriate housings and

is available in both m1 micro 45 degree and m1 micro 90 degree

versions. The m1 micro 90 degree takes 12V 20W GU4 halogen lamp

or a 2W 3000K led. The m1 micro 45 degree version to be used as a

step light or as ambient light, can be fitted with the 12 V 1.5W G4

led 3000K supplied or a 4W 3000K led. Bulb depth can be adjusted

through a maximum distance of 35mm for both versions.

M 1 M i c rM

i c r o


M 3



M3recessed floodlight suitable for indoor or outdoor use made of

peraluman aluminium alloy with an IP67 IK10 (20 joules)

protection rating. it features frosted or transparent glass and can

be fitted with halogen, led, fluorescent, or metal halide lamps. a

special stainless steel frame is available for recessing the

spotlight. anti-glare louvres, a grazing light frame with

transparent glass and an anti-glare ring (for E27 kits only) are

available on request. the grazing light version is supplied with

70W RX7s and 150W RX7s-24 metal halide lamps or 6W 3000K

led, which throw a grazing light onto the ground.

M 3


l b e r o

M 3 A



M3 AlberoIP67 rated IK10 (20joules) recessed drive-over projector light

fitting for indoor and outdoor use, made of polyethylene and

peraluman aluminium. consisting of a projector inserted into a

housing to be embedded into the ground, which allows its

orientation. the housing measures 460x460x280mm and the

light fitting consists of a cylinder that measures 120mm in

diameter and 120mm high, wired with a G12 35W or 70W

adjustable metal halide lamp. power supply unit and transparent

glass included. a special screen printing on the glass allows the

light to spread through the air with the same effect as

backlighting among the leaves of the trees.

M 3 A lA

l b e r o


M 4

M 4



M4(also available in LED)Mario nanni 1995 IP67 rated recessed light fitting for interior

and exterior use IK08 (5 joules), consisting of a cylindrical body in

matt black aluminium or natural brass and round or square

shaped bezels in aluminium or natural brass. Available in two

versions: comfort (118mm long) and short (66mm long); it can

be recessed, using the relevant housings or ground (drive-over),

wall or ceiling mounted. The exterior housing enables the short

floodlight to be ceiling mounted, while the large housing can

accommodate the 70W IP67 rated transformer.

M


4 4

M 4 4



M44recessed IP67 IK07 (2 joule) projector for indoor and outdoor

applications, consisting of a matt aluminium or matt black

cylindrical body and a round or square bezel in bright silver

aluminium. m44 is complete with GU5,3 lamp-holder for max

35W dichroic lamps diameter 51 max or with GX10 light-holder

for 20W and 35W lamps or 8W led, all of them with matt black

finish. it may be recessed by means of the relevant housing to be

fitted into floor and the wall.

M 4

4


4 4 4

M 4 4



M444recessed projector for interiors and exteriors, IP67 protection,

consisting of a cylindrical body in opaque aluminium and a bright

silver round aluminium bezel with internal clear or satin glass(drive over). m444 is complete with a G12 lampholder for metal

halide lamps. it can also be recessed into floors and walls using

housings provided for the purpose. also available with 35 –70W

power supply.

M 4 4




o p p y

M a x x



Maxxi Poppy IP55 rated floor light for outdoor use, made of a red fibreglass

diffuser mounted on an outdoor post, in antique brown painted

steel, to be anchored to a specific ground plate that measures530mm high. are available: with a maximum elliptical section of

1800x2050mm, with an above-ground height of 4350mm, and

with a maximum elliptical section of 1610mmx1590mm, with an

above-ground height of 3930mm. both versions are wired for

the G12 35W/70W/150W metal halide lamps. one more

available version : IP65 with a maximum elliptical section of

760x840mm, with an above-ground height of 2040mm, wired

for the metal halide lamp G12 35/70W.

M a x x i P ox i P

o p p y


f i t t o

M M P



MM Parete- Soffittowall /ceiling lamp for exterior use IP44 made in AISI 304 steel

painted white with glossy aluminium lamp support and closed

with IK10 transparent glass. it's wired with 60W 250V E27

halogen lamp in the wall version and 2x60W 250V E27 in the

ceiling version.

M M P

a r e t e - S O f fP

a r e t e- S o f f i t t o


N i l u

N i l u



NiluIP67 rated floor-standing indoor and outdoor lamp, it consists of

a 1400mm high carbon fibre stem with a diameter of 5mm. it

can be fixed to the ground with a stake or directly on a140x140mm nichel-plated steel square base. the head of the

stem diffuses a 1W 3000K white led light with a 350mA constant

current power supply unit (not included) and it is enveloped in a

water-lily flower made of weather-proof nautical map paper

particularly suited for outdoor use. power supply unit not

included.

N


n f e a

N i n f e



Ninfeatea light holder consisting of two sheets of parchment in the

shape of a water lily, resting on a green polycarbonate base.

creating the shape of ninfea couldn't be simpler, thanks to thetracks that indicate the folding lines and the shaped ends for

fastening the petals together. the candle is included in the box.

N i n

e a


r e l l a

O m b r



Ombrellafloor lamp for exterior use, with a 316L stainless steel and 20

micron matt silver anodised aluminium structure. the canvas

cover is made of white acrylic fabric. it stands on a 316L stainless

steel square base or can be recessed using a special ground

anchor. the height of the support stem is adjustable. ombrella is

wired for 4x3W rgb leds for indirect light, plus 6 3x1W 3000K

white leds, fitted with 25° light concentrating lenses, for direct

light. ombrella is designed as an independent fitting or as part of

a system of fittings linked together and synchronised. in both

versions, it is possible to control the light sources using a single

remote control handset with which to turn direct and indirect

light fittings on and off, allowing separate adjustment. It is also

possible to manage and synchronize the light sources using a

remote DMX signal generator, not included. the remote control

also allows the choice of programmed scenery and effects for

rgb sources. ombrella is powered at low voltage (24Vdc),

connected to its own separate electronic power supply unit.

when closed it can be covered with its own transparent wrap

which allows light diffusion, transforming it into a new light

fitting.

O m b r

r e l l a


1

P 1



P1light fitting for wall mounting and with fastening stake, IP65

protection-rated for indoor and outdoor use. available in the

finishes antique brown, night black, scurodivals and silver grey. it

is made up of a cylindrical head with 36mm diameter and 72mm

height. adjustable by 355° along the vertical axis and by 90°

along the horizontal axis inserted on a wall bracket or on a

garden stake. the wall mounted version is available either with

bracket (36mm diameter) or with a box containing the power

supply unit, which is supplied. the stake version is available with

a curved rod (12mm diameter, 450mm or 18mm height

overground). wired with 6W-630lm 3000K led source, power

supply units and cable with connection 3 poles m8 not included.

P 1


2

P 2



P2light fitting for wall mounting and with fastening stake, IP65

protection rated for indoor and outdoor use. available in the

finishes antique brown, night black, scurodivals and silver grey. it

is made up of a cylindrical head with 80mm diameter and

126mm height. adjustable by 355° along the vertical axis and by

90° along the horizontal axis inserted on a wall bracket and on a

garden stake. the wall mounted version is available either with

bracket (80mm diameter) or with a box containing the power

supply unit, which is supplied. the stake version is available with

a curved rod (20mm diameter, 800mm or 25mm height

overground). wired with V led.t/80 3000K (Ra80 24,7W-2300lm),

power supply units and cable with connection 3 poles m8 not

included.

P 2


a l o B

P a l oB



Palo BIP67 rated light fitting for exterior use, made of corten steel or

aluminium finished in antique brown, night black, dark vals or

silver grey. it is available in two versions: 5000mm, using theappropriate ground anchor and 500mm, ground fixing included.

the pole head in frosted methacrylate, 100mm high and 80mm

diameter, takes four 1W leds, power pack included, in three

different colour combinations: white, blue and blue-white. using

the appropriate ground fixing it is possible to install the 5000mm

version at right angles to the ground or at a 10° angle. corten

steel, if exposed to the open air, acquires a brown, self-


depending on its exposure to the elements.

P a

B


u r i g o

P a l oD



Palo Di ZurigoIP55 rated light fitting in steel for external use, available finished

in antique brown, night black, ‘scurodivals’ or silver grey. it

consists of a 4555mm high pole and an chromed steel disc fittedat the top. the light source is enclosed by a screen that directs

part of the light to the ground and part of it upwards towards a

1160mm diameter disc shaped in such a way as to reflect a new

and differently shaped halo of light onto the ground. the

reflector disc is available in various materials: chromed steel or

copper, so as to produce light in different shades of colour. it is

wired for a 70W maximum G12 metal halide kit.

P a l o D i Z u

D i Z u r i g o


a r t i n o

P a l o M



Palo MartinoIP55 rated light fitting for outdoor use, consisting of a steel

projector with a section of 90x158mm and 616mm long, with a

powder paint finish in antique brown, night black, scurodivals orsilver grey, for installation on 80x80mm section steel poles, with

the same finishes. three versions of pole are available: 4600mm

mounting one projector; 6000mm mounting max 2 projectors

and 8000mm mounting max 3 projectors. the projector is wired

with three 3000K 12W 2700 lm Ra85 led sources, powered at

240V 50-60Hz. power supply unit included. accessory: ground

plate.

P a l o M a

M a r t i n o


g i o l o

R e g g i o



ReggioloIP67 light fitting for outdoor use, made of steel with in antique

brown, night black, scurodivals or silver grey finishing. it's

dimensions are 430x430x430mm. it's installed on a recessed m3floodlight with a 8° light beam and is wired with a 35/70W G12

metal halide light. it can be installed in the ground by using

appropriate casing or a recessed frame. by adjusting the

reflecting element, the light beam can be directed either

horizontally effecting the light on the surrounding pavement or

vertically effecting the lighting of vertical elements such as trees,

columns ecc.

R e g g

o l o


V a l s

S e n t i e



Sentiero Di ValsIP65 rated light fitting in steel for external use, available finished

in antique brown, night black, 'scurodivals' or silver grey. it is

5200mm high above ground and is fitted with a fully concealedaccessible terminal block. the pole is made in one piece, is

conical in shape and is inclusive of pole –head. it is designed to

accommodate 35/70W G8,5 metal halide kits, including power

supply unit, with 8°, 40° or asymmetric light beam, complete

with oval shaped frosted protective glass.

S e n t i e r o D i V

r oD i V a l s


a e s o l e

S o l e e l u



Soleeluna LunaesoleIP67 lamp for outdoor use. soleeluna is made up of a circular

profile, with a 434mm outside diameter and a 40mm height. it is

an outdoor system that graphically marks routes, natural details,objects, and urban designs. wired for a 13W 3000K 24Vdc

continual light led, it is provided with IP68 connector for electric

connection also outdoor.

S o l e e l u n a L u n u

n aL u n a e s o l e


b e

S q u a r e



Square Tubeoutdoor light fixture IP65 in silver or brown oxidized aluminium

available in three sizes: 1000mm, 1600mm and 1900mm. it takes

respectively G5 14W, 28W and 35W fluorescent lamps fordiffused and uniform light. square tubes can be used free

standing or fitted to the ceiling and, thanks to the special flange,

can be turned by up to 120°. the stainless –steel spike allows

installation also in parks and gardens.

S q u a r e T u be

T u b e


k i m i s o

T s u k i m



Tsukimisofloor-standing outdoor lamp made up of two parts: one has to be

laid underground, with a IP68 rating, the other one is made up of

a led top with a IP65 rating. tsukimiso consists in a stainless steel

telescopic stem, 316L, that rises up to 600mm from the ground,

on top of which there is the head of the aluminium light fitting,

made up of a cylinder with a diameter of 90mm and a 25mm

height. the top is wired for 6 leds (overall 6W and 3000K) with an

symmetric ground addressed light. a motor-driven system, which

has a stepper motor, allows the millimetric setting of the light

fitting. consequently tsukimiso looks like a night flower that

disappears during the day and that rises from the ground at

night, thanks to the darkness; its adjustable height allows to

create ever-changing, fascinating sceneries of light, with

unexpected suggestions. tsukimiso is equipped with pvc housing;

the control system must be ordered separately with dmx control.

it is also available a stable version to plant in the ground with the

appropriate marker.

T s u k

m i s o


g h i

U n a g h



Unaghi IP68 rated floor-standing, wall, ceiling and suspension light

fitting for interior and exterior use. unaghi is a pyrex glass

cylinder with a 2.8mm thickness and a diameter of 45mm,available in four different lengths: 672, 972, 1272 and 1472mm,

complete with 316L stainless steel end stoppers, one blind and

one fit with a four-pole IP68 male connector. for the whole

length it is lit by three strips of continual light led each of a

different colour temperature. 3000K, 4000K and 5000K. the

three three colour temperatures can be controlled separately

with a remote control so as to obtain the desired effects in the

whole range of whites available. accessories: suspension cables

and wall attachments are available.

U n a i


l l e g g i o

U p O G a



UpOGalleggioa tiny UpO comes down to earth, but decides not to land, preferring

to float in its completely watertight hull. it has come in peace. it is

see –through because it has nothing to hide, and, in fact enjoys

casting its delicate light on all that surrounds it, like the shimmering

of the moon on the surface of the sea. inside it is home to three tiny

leds powered by three ultra –modern rechargeable batteries

(NiMH). they are working in complete harmony with one another,

each strategically placed : one lower axial and the other two placed

radially on opposite sides. they light up in a host of combinations:

red –white, blue –white, blue –blue, red –red. like technological

fireflies, they are sensitive little creatures blinking in the dark. they

wait for the circuit to close and for both poles to caress the water,

before they start to glimmer. a brief charge makes them flicker on

and off. then comes their startling transformation into gliding lamps

or reading lights. they are nurtured by this contact, and once

separated, shine for 5 seconds more, then sink into darkness. they

love playing with colour and light, bobbing around carefree in a pool

or a hot bathtub, while you relax with a book or take a relaxing

stroll. but once their games are over, they take wearily to their beds

and snuggle down to be recharged with precious energy until the

current of sleep leaves them, and they awake, revitalized, ideally,

they should sleep for fourteen hours before they are refreshed

enough to return to their playful games, dancing in our hands or

among the waves of water, illuminating all around.

U p O G a la

l l e g g i o


V a s e

V a s e



Vasestanding floodlight for indoors or outdoors made of peraluman

aluminium alloy. it features frosted or transparent glass and an

IP67 protection rating. it can take halogen, fluorescent or metalhalide lamps. louvre, oblique light frame In transparent glass

(only for metal halide kit) andanti –glare ring (only for kit E27) are

also available. impact test resistance at IK10 20J (Joules).


Z e r o

Z e r o



ZeroIP67 spotlight for interiors and exteriors, comprising a cylindrical

body and round bezel, both in opaque oxidized aluminium. it can

be installed on the ceiling, wall or ground by means of specific

housing. it can also be secured by means of a spring or ring nut

and rear screws. wired for 1W led 3000K/4000K in different

colours on an interchangeable mobile head, meaning that the

light colour can be changed without having to replace the body.


e n t a b i l e

Z e r o O r



Zero OrientabileIP40 recessed light fitting, made of silver or black oxidized

aluminium or white varnished aluminium. it can rotate 10° on

the longitudinal axis and is wired for 3000K white led, 1W

350mA and 2W 500mA. the light fitting can produce different

light effects thanks to the use of various lens, 8°, 30°, 45° and

elliptical, that must be ordered aside.

Z e r o O r i er i e

n t a b i l e

t a c t U s



Distributor for Viabizzuno

Web: www.cirruslighting.co.uk

Email: [email protected]

Tel: 0207 193 2175

Fax: 0207 193 3175

C o n t

viabizzuno exterior

Documents