veterans canteen service (206) - wbdg · file drawer, and reference slide in left hand pedestal,...

EQUIPMENT LIST UPDATE206 VETERANS CANTEEN SERVICE

June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECA1010 Telecommunication Outlet 1 CC Telecommunication outlet location. 27 31 00A1016 Telephone, Desk, With Speaker 1 CC Telephone, desk, with speaker. 27 31 00A1011 Telephone, Desk, 1 Line 1 CC Telephone, desk, 1 line. 27 31 00A5155 Costumer, Wall, Executive 1 CC A contemporary solid hardwood or wood laminate panel with a minimum of 3 hooks and 2

matching solid wood hangers. At a minimum, panel and hangers shall be available in oak or walnut. For general purpose use in executive offices to hang various items of apparel.

A6046 Artwork, Decorative, With Frame 1 VV This JSN is to be used for determining and defining location of decorative artwork.F0120 Bookcase, Executive, 3 Shelf, Wood 1 VV Freestanding open shelf woodgrain bookcase, approximately 48" high X 36" wide X 13" deep

with three (3) adjustable shelves and four (4) non-marking floor glides.F0235 Chair, Executive, Side 2 VV Executive side chair, 35" high x 26" wide x 27" deep with cushioned seat, back and arms.

Straight leg or sled base available.F0240 Chair, Executive, Swivel 1 VV Executive swivel chair, 39" high X 26" wide X 26" deep with arms, a five (5) caster base and

tilt mechanism. Seat and back have foam rubber cushions. Upholstery may be either woven fabric or vinyl.

F0600 Credenza, Executive, Wood 1 VV Executive credenza with two (2) box drawers, two (2) file drawers, a center closed storage area with adjustable shelf and floor glides.

F0650 Desk, Executive, Wood 1 VV Double pedestal executive desk, 30" high X 72" wide X 36" deep with center pencil drawer, three (3) box drawers and reference slide in right hand pedestal; one (1) box drawer, one (1) file drawer, and reference slide in left hand pedestal, locks for each section (pedestal) of the desk, and metal suspension hardware for the file drawer.

F0710 Table, Computer, With Print Shelf 1 VV Computer work table, approximately 31" high X 49" wide X 24" deep with retractable shelve(s) for keyboard and/or extra work space, adjustable shelves for printer and printer paper, and (optional) dual wheel casters (two locking).

F0725 Table, Occasional, Executive, Wood 1 VV Executive chairside table, approximately 21" high X 26" wide X 20" deep. Used as an occasional table in an executive suite.

F2005 Basket, Wastepaper, Executive, Wood, 15 x 13 x 13 1 VV Executive wastepaper basket, approximately 15" high X 13" wide X 13" deep.F2420 Lamp, Table, With Shade 1 VV Table lamp, 27-34" high X 6" wide X 6" deep with linen shade. Convenience outlet required

at point of use.F3200 Clock, Battery, 12" Diameter 1 VV Clock, 12" diameter. Round surface, easy to read numbers with sweep second hand. Wall

mounted unit for use when impractical to install a fully synchronized clock system. Battery operated, (batteries not included).

206 VETERANS CANTEEN SERVICE

1. OFFICE, VCS CHIEF (OFM02)

A. STAFF AND ADMINISTRATIVE AREAS

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECM1801 Computer, Microprocessing, w/Flat Panel Monitor 1 VV Desk top microprocessing computer. The unit shall consist of a central processing mini

tower, flat panel monitor, keyboard, mouse and speakers. The system shall have the following minimum characteristics: a 2.8 GHz Pentium processor; 512 MB memory; 80GB hard drive; 32/48x CD-ROMDVD combo; a 3.5" floppy drive; 1.44MB network interface card; video 32 MB NVIDIA; a 15 inch flat panel color monitor. The computer is used throughout the facility to input, manipulate and retrieve information.

M1825 Printer, Computer 1 VV High resolution computer printer with a variety of type styles and sheet/envelope feeder trays. Database information reflects network ready, medium duty office style laser printers. Other types of printers (bubble jet, dot matrix, line or plotter) as well as light or heavy use capabilities are available.

A1010 Telecommunication Outlet 1 CC Telecommunication outlet location. 27 31 00A1016 Telephone, Desk, With Speaker 1 CC Telephone, desk, with speaker. 27 31 00A5145 Hook, Garment, Double, SS, Surface Mounted 1 CC A surface mounted, satin finish stainless steel, double garment hook. Equipped with a

concealed mounting bracket that is secured to a concealed wall plate. For general purpose use throughout the facility to hang various items of apparel.

10 28 00

A5185 Track, Drapery, Ceil/Wall Mntd, Sngl Channel Cord 1 VV Ceiling or wall mounted single channel cord drapery track. Adjustable with mounted brackets and slides. Dimensions and shape as required. Unit consists of a thick extruded aluminum track. Equipped with self-lubricating carriers, beaded drop chain, hooks, removable end caps, and curtain. Designed to be suspended around patient areas where privacy is needed. Price listed is per foot of the track, curtains to be priced per quote.

A6046 Artwork, Decorative, With Frame 1 VV This JSN is to be used for determining and defining location of decorative artwork.A6305 Drapes, Pair 1 VV This JSN is to be used for determining and defining the location of drapes. Fabric to be

flame retardant, variable colors and patterns with backing. Price based on a pair of drapes for a window approximately 36" W X 60" H.

F0110 Bookcase, 3 Shelf 1 VV Freestanding open metal shelf book case, approximately 60" high X 36" wide X 18" deep with three (3) adjustable shelves and four (4) non-marking floor glides.

F0205 Chair, Side With Arms 1 VV Upholstered side chair, 32" high X 21" wide X 23" deep with arms, padded seats and padded backs. Seat height is a minimum of 17". Available with or without sled base.

F0275 Chair, Swivel, High Back 1 VV Highback contemporary swivel chair, 41" high X 23" wide X 23" deep with five (5) caster swivel base and arms. Chair may be used at desks or in conference rooms. Back and seat are foam padded and upholstered with either woven textile fabric or vinyl.

F0405 Cabinet, Filing, Full Height, 4-5 Drawer 1 VV Four (4) or five (5) drawer letter size, vertical filing cabinet, 53" high X 15" wide X 29" deep with locking device. Each drawer has label holder, handle and roller cradle.

2. OFFICE, VCS ASSISTANT CHIEF, FOOD SECTION (OFA01) 3. OFFICE, VCS ASSISTANT CHIEF, RETAIL (OFA01)

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECF0420 Cabinet, Filing, Lateral, Half Height 1 VV Half height two (2) or three (3) drawer lateral filing cabinet, 28" high X 42" wide X 18" deep

with recessed handles, locking device and drawer label holders. Drawers are adaptable to either letter or legal size materials.

F0635 Desk, Double Pedestal 1 VV Double pedestal flat top desk, 30" high X 60" wide X 30" deep with center pencil drawer, choices of combinations of file and box drawers, floor glides and modesty panel.

F2000 Basket, Wastepaper, Round, Metal 1 VV Round wastepaper basket, approximately 18" high X 16" diameter. This metal unit is used to collect and temporarily store small quantities of paper refuse in patient rooms, administrative areas and nursing stations.

F3200 Clock, Battery, 12" Diameter 1 VV Clock, 12" diameter. Round surface, easy to read numbers with sweep second hand. Wall mounted unit for use when impractical to install a fully synchronized clock system. Battery operated, (batteries not included).

M1801 Computer, Microprocessing, w/Flat Panel Monitor 1 VV Desk top microprocessing computer. The unit shall consist of a central processing mini tower, flat panel monitor, keyboard, mouse and speakers. The system shall have the following minimum characteristics: a 2.8 GHz Pentium processor; 512 MB memory; 80GB hard drive; 32/48x CD-ROMDVD combo; a 3.5" floppy drive; 1.44MB network interface card; video 32 MB NVIDIA; a 15 inch flat panel color monitor. The computer is used throughout the facility to input, manipulate and retrieve information.

M1825 Printer, Computer 1 VV High resolution computer printer with a variety of type styles and sheet/envelope feeder trays. Database information reflects network ready, medium duty office style laser printers. Other types of printers (bubble jet, dot matrix, line or plotter) as well as light or heavy use capabilities are available.

A1010 Telecommunication Outlet 1 CC Telecommunication outlet location. 27 31 00A1016 Telephone, Desk, With Speaker 1 CC Telephone, desk, with speaker. 27 31 00A5145 Hook, Garment, Double, SS, Surface Mounted 1 CC A surface mounted, satin finish stainless steel, double garment hook. Equipped with a


10 28 00

A6046 Artwork, Decorative, With Frame 1 VV This JSN is to be used for determining and defining location of decorative artwork.

2. OFFICE, VCS ASSISTANT CHIEF, FOOD SECTION (OFA02) 3. OFFICE, VCS ASSISTANT CHIEF, RETAIL (OFA02)

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECE0078 Workstation, L-Shaped w/Peninsula, Free Std, 78x72 1 VV This section will provide a whole work station typical to quickly plan work areas in clinical or

administrative spaces. There will be a price decrease if typical work stations are used with vertical hanging strips instead of panels. THIS TYPICAL INCLUDES:� 1 solid panel, 85"H (2159mm) x 48"W (1219mm);� 1 solid panel, 85"H (2159mm) x 30"W (762mm); � 2 solid panels, 47"H (1194mm) x 24"W (610mm);� 2 panel connectors, 2-way corner, 85"H (2159mm);� 1 panel-to-panel connector; � 2 finished end hardware;� 1 cantilevered work surface, 48"W (1219mm);� 1 peninsula work surface, 72"W (1829mm);� 1 lockable flipper unit, 48"w (1219mm);� 1 lockable flipper unit, 30" W (762 mm);� 1 shelf, storage/display, 48"W (1219mm);� 1 shelf, storage/display, 30"W (762 mm);� 1 light, 48"W (1219mm);� 1 light, 30"W (762mm);� 1 tack board, 48"W (1219mm);� 1 tool rail, 30"W (762mm);� 1 paper tray;� 1 diagonal tray; � 1 adjustable keyboard tray;� 1 mobile pedestal, box/file.




F0420 Cabinet, Filing, Lateral, Half Height 1 VV Half height two (2) or three (3) drawer lateral filing cabinet, 28" high X 42" wide X 18" deep with recessed handles, locking device and drawer label holders. Drawers are adaptable to either letter or legal size materials.



of 29


June 2008



A1010 Telecommunication Outlet 1 CC Telecommunication outlet location. 27 31 00A1016 Telephone, Desk, With Speaker 1 CC Telephone, desk, with speaker.A5145 Hook, Garment, Double, SS, Surface Mounted 1 CC A surface mounted, satin finish stainless steel, double garment hook. Equipped with a


10 28 00

E0099 Workstation, Corner Work Surf, Free Stand, 72x96 1 VV THIS TYPICAL INCLUDES:�4 Standard Solid Panel�2 Panel-to-Panel Connectors�1 Panel Connector, 2-Way Corner�2 Finished End Hardware �1 Cantilevered Corner Work Surface�2 Cantilevered Work Surface�3 Lockable Flipper Units�3 Lights�2 Tackboards�2 Tool Rails�2 Paper Trays�1 Diagonal Tray�1 Adjustable Keyboard Tray�1 Mobile Pedestal, Box/File�2 Support Panels




See Above: A. STAFF AND ADMINISTRATIVE AREAS, 2. OFFICE, VCS ASSISTANT CHIEF, FOOD SECTION (OFA01) 4. OFFICE, SECURE MONEY HANDLING ROOM (OFA01)

5. CUBICLE, CLERK (OFA03)

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECF0420 Cabinet, Filing, Lateral, Half Height 1 VV Half height two (2) or three (3) drawer lateral filing cabinet, 28" high X 42" wide X 18" deep

with recessed handles, locking device and drawer label holders. Drawers are adaptable to either letter or legal size materials.



A1010 Telecommunication Outlet 1 CC Telecommunication outlet location. 27 31 00M2070 Shelving, Storage, 77hx36wx18d AR VV Storage shelving unit approximately 77" H X 36" W X 18" D. Corrosion resistant baked

enamel, galvanized or stainless steel open unit with adjustable shelves. The closed version is also available. For use in the storage room.

A1010 Telecommunication Outlet 1 CC Telecommunication outlet location. 27 31 00A1014 Telephone, Wall Mounted, 1 Line, With Speaker 1 CC Telephone, wall mounted, 1 line, with speaker. 27 31 00A1180 Scale, Roll On, Built In, 2000 Pound Capacity 1 CC Built-in roll on scale with a 2000 pound capacity. Unit consists of a flush scale, floor

mounted, and wall mounted display. The platform can be left exposed or covered with carpet. For use in food service or the laundry.

A6105 Counter, Reception Control, Built-In 1 CC Counter, control, inpatient, built-in. Consists of two 18” wide base cabinets with two drawers and file drawer, two 30” wide pencil drawers and two 18” wide base cabinet with four drawers. The countertop shall be a composition of wood particle core with plastic laminate surface having a hard smooth surface finish, standard thickness of 1” and a 4” butt backsplash/curb. Pricing based on a 30" depth.

2. RECEIVING AREA (MMRP1)

B. RETAIL STORE

1. STORAGE, RETAIL (SRE01)

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECE0078 Workstation, L-Shaped w/Peninsula, Free Std, 78x72 1 VV This section will provide a whole work station typical to quickly plan work areas in clinical or

administrative spaces. There will be a price decrease if typical work stations are used with vertical hanging strips instead of panels. THIS TYPICAL INCLUDES:� 1 solid panel, 85"H (2159mm) x 48"W (1219mm);� 1 solid panel, 85"H (2159mm) x 30"W (762mm); � 2 solid panels, 47"H (1194mm) x 24"W (610mm);� 2 panel connectors, 2-way corner, 85"H (2159mm);� 1 panel-to-panel connector; � 2 finished end hardware;� 1 cantilevered work surface, 48"W (1219mm);� 1 peninsula work surface, 72"W (1829mm);� 1 lockable flipper unit, 48"w (1219mm);� 1 lockable flipper unit, 30" W (762 mm);� 1 shelf, storage/display, 48"W (1219mm);� 1 shelf, storage/display, 30"W (762 mm);� 1 light, 48"W (1219mm);� 1 light, 30"W (762mm);� 1 tack board, 48"W (1219mm);� 1 tool rail, 30"W (762mm);� 1 paper tray;� 1 diagonal tray; � 1 adjustable keyboard tray;� 1 mobile pedestal, box/file.



F0420 Cabinet, Filing, Lateral, Half Height 1 VV Half height two (2) or three (3) drawer lateral filing cabinet, 28" high X 42" wide X 18" deep with recessed handles, locking device and drawer label holders. Drawers are adaptable to either letter or legal size materials.

F0530 Cart, Trash 1 VV Heavy duty trash cart, 42" high X 74" wide X 34" deep with two (2) solid non-marking rubber roller bearing wheels, two (2) swivel casters, 2000 pound capacity and tilt mechanism.

F0775 Table, Work, 2 Drawer 1 VV Work table approximately 32" high X 72" wide X 30" deep with two drawers and a hard wood top.

F2700 Reader, Bar Code, Hand Held, With Interface 1 VV Hand held laser bar code reader with computer interface. Used for automated inventory, using bar code stickers / labels. Convenience outlet required at point of use.

of 29


June 2008



M1840 Printer/Copier/Fax Combination 1 VV Multifunctional printer, fax, scanner and copier (PFC) all-in-one machine.M2020 Cabinet, Storage, Safety, Built-In, Vented 1 CC Safety storage cabinet. This unit is of double steel wall construction, with vented grounding

attachment, raised leak proof door sill, and adjustable shelving. Equipped with two doors and three-point key lock. The construction meets standards set by OSHA and NFPA Code 30 requirements. Designed for storage of flammable type liquids. The cabinet fits into a laboratory casework configuration and its ventilation ports are in the back to leave the counterspace free. The cabinet requires ventilation ducting and an exhaust fan as part of the HVAC (heating, ventilation and air conditioning) system.

11 53 53

M2055 Shelving, Storage, Wire, CRS, w/Adjustable Shelves 1 VV Stationary, wire, shelving unit. Unit has fully adjustable shelves constructed of stainless steel. For use in general purpose storage areas. Shelving is provided in various sizes and configurations. Price provided is for a unit approximately 74"H x 18"D x 48"W with four shelves.

M2105 Pallet Lift, Hydraulic, Manual, 48" Pallet 1 VV Hydraulic manual pallet equipped with floor lock and wheels for easy transport. Unit accommodates 48" pallets and is designed to handle all types of lifting tasks.

M2115 Truck, Hand, 2 Wheel 1 VV 2 wheel hand truck. Double handled with three supportive crossbars for heavy duty use. 800 pound weight capacity with two 8 or 10 inch wheels. For use in the warehouse.

M2125 Stacker, Straddle, 127" Lift, 2000 lb Capacity 1 VV Straddle stacker. Battery powered with 2000 pound lifting capacity. Unit lifts to heights up to 127". Equipped with a extra heavy duty hydraulic system. Unit has a built-in automatic battery charger. Electrical requirements are for the charger. Designed for pallet lifting.

M2130 Truck, Hydraulic Lift, Electric 1 VV Electric lift truck. Equipped with heavy duty hydraulic system and 12 V battery. For use within enclosed warehouse spaces. Adjustable 25" (approx) long forks. Complete with 10 amp charger. Counterweight must be used to help prevent tipping. NOTE: Not recommended for moving long distances or over uneven surfaces.

M7780 Scanner, Document 1 VV Scanner for recording printed material in an electronic format. Some models process both color and black-and-white images. Options include automatic paper feeders and transparency adapters. Most models require connection to a microcomputer for independent operation or use as part of a network. Larger models for high use applications which connect directly to a network without passing information through a microcomputer are available.

3. STORAGE, REMOTE, RECEIVING AREA (SRS01)

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECE0903 Locker, Supply, w/Shelves, Wall Mtd, 23"W x 20"D 2 VV THIS TYPICAL INCLUDES:�

1 Wall Mounted Rail�1 Supply Locker�1 Drawer, 9"H (229mm)�4 Tray/Shelves�Drawer Organizers�Consider the need for an E0921 to transport the locker from place to place.

E0906 Locker, Supply, General, Wall Mtd, 23"W x 20"D 5 VV THIS TYPICAL INCLUDES:�1 Wall Mounted Rail�1 Locked Storage Container�2 Tray/Shelves�1 Drawer, 3"H (76mm)�3 Drawers, 6"H (152mm)�2 Drawers, 9"H (229mm)�1 Tray/Shelf Divider�Drawer Organizer Bins�Consider the need for an E0921 to transport the locker from place to place.

E0921 Transporter, Locker, Supply, 27"W x 25"D 2 VV THIS TYPICAL INCLUDES 1 transporter for large storage containers. The unit is used to move supply lockers.

E0948 Cart, General Storage, Mobile, 42"H x 32"W x 22"D 2 VV THIS TYPICAL INCLUDES:�1 Cart Body, Style-A Narrow, w/Raised Edge Top�1 Accessory Rail, Side�2 Drawers, 3" H (76mm)�4 Drawers, 6" H (152mm)� Drawer Organizer Bins

E1500 Rail, MOD, W/MNTD, HX144XD 3 VV Wall mounted rail used for hanging (mounting) lockers, shelves drawers on a wall.F2000 Basket, Wastepaper, Round, Metal 1 VV Round wastepaper basket, approximately 18" high X 16" diameter. This metal unit is used

to collect and temporarily store small quantities of paper refuse in patient rooms, administrative areas and nursing stations.

A1010 Telecommunication Outlet 1 CC Telecommunication outlet location. 27 31 00

A5075 Dispenser, Soap, Disposable 1 VV Disposable soap dispenser. One-handed dispensing operation. Designed to accommodate disposable soap cartridge and valve.

See Above: B. RETAIL STORE, 4. RETAIL AREA (BX001)

6. HOUSEKEEPING AIDES CLOSET (HAC) (JANC1)

4. RETAIL AREA (BX001)

5. RETAIL AREA, ADAPTED FOR SPINAL CORD INJURY PATIENTS (BX001)

EQUIPPED BY OTHERS

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECA5080 Dispenser, Paper Towel, SS, Surface Mounted 1 CC A surface mounted, satin finish stainless steel, single-fold, paper towel dispenser.

Dispenser features: tumbler lock; front hinged at bottom; and refill indicator slot. Minimum capacity 400 single-fold paper towels. For general purpose use throughout the facility.

10 28 00

A5135 Shelf, Utility W/ Mop/Broom Holders, SS, Surf Mntd 1 CC A surface mounted, satin finish stainless steel, utility shelf with a maximum of 6 mop/broom holders and 5 rag hooks. Utility shelf features: 8" deep shelf; mounting brackets welded to shelf; spring activated rubber cam holders; and drying rod. Unit is available in various widths 30" (minimum, 3 holders and 2 hooks) to 48" (maximum, 6 holders and 5 hooks). For use in janitor closets. Pricing based on a 36" width.

10 28 00

F0500 Cart, Janitor's 1 VV Janitors cart, 38" high X 66" wide X 20" deep with 25 gallon heavy duty collection bag. Accommodations for locking vault and janitorial support items (broom, dust pan, chemicals, mop and mop bucket; not included).

F0505 Bucket, Mop, With Wringer, 26 Quart 1 VV Mobile mop bucket / wringer combination, approximately 35" H x 17" W x 22" D with four 2" casters. Total capacity is 26 quarts. Unit used for general hard surface floor maintenance.

P4700 Sink, Mop, Molded Stone, 10x36x24 1 CC Mop service sink. Also called a mop service basin and a mop receptor. Unit is made of molded stone and is a one piece item. It shall include a service faucet hose, hose bracket and mop hanger. Used in utility rooms for cleaning mops and floor cleaning equipment.

22 40 00

A1010 Telecommunication Outlet 1 CC Telecommunication outlet location. 27 31 00A1011 Telephone, Desk, 1 Line 1 CC Telephone, desk, 1 line. 27 31 00F2125 Cash Register, With Locking Drawer AR VV Electronic cash register system. This unit includes multiple menu capabilities. Equipped

with removable cash drawer for complete security. Calculator function and tax table. Convenience outlet required at point of use.

F3070 Case, Display AR VV Display case. Equipped with glass doors, adjustable glass shelves, security locks and choice of either fabric or mirror backing.

See Above: B. RETAIL STORE, 4. RETAIL AREA (BX001)

C. RETAIL CONCESSION

1. RETAIL DISPLAY AND STORAGE (BX001)

1. RETAIL AREA (BX000)

D. COFFEE SHOP

EQUIPPED BY OTHERS

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECF3200 Clock, Battery, 12" Diameter 1 VV Clock, 12" diameter. Round surface, easy to read numbers with sweep second hand. Wall

mounted unit for use when impractical to install a fully synchronized clock system. Battery operated, (batteries not included).

F0210 Chair, Side, Without Arms AR VV Upholstered side chair approximately 32" high X 19" wide X 23" deep with floor glides. Seat is non-tilting and without arms.

F0795 Table, Dining AR VV Dining table. Round 42" diameter or square 42" X 42". Used in dining facilities and can comfortably seat up to four (4) persons.


A1010 Telecommunication Outlet AR CC Telecommunication outlet location. 27 31 00A1011 Telephone, Desk, 1 Line 1 CC Telephone, desk, 1 line.A1066 Mirror, Float Glass, With SS Frame 1 CC A high quality 1/4" polished float glass mirror 36X18, framed in a one-piece, bright polished,

stainless steel channel frame with 90° mitered corners. All edges of the mirror are protected by absorbing filler strips. Mirror has a galvanized steel back with integral horizontal hanging brackets and wall hanger for concealed mounting. For mounting above single wall mounted lavatories located in toilet areas, Doctors examination offices, etc. May also be used above double lavatories, either wall or countertop mounted, found in restroom areas.

10 28 00


10 28 00

A5080 Dispenser, Paper Towel, SS, Surface Mounted 1 CC A surface mounted, satin finish stainless steel, single-fold, paper towel dispenser. Dispenser features: tumbler lock; front hinged at bottom; and refill indicator slot. Minimum capacity 400 single-fold paper towels. For general purpose use throughout the facility.

10 28 00

A5106 Waste Disposal Unit, Sharps w/Glove Dispenser 1 VV The unit is designed for the disposal of sharps and complies with OSHA guidelines for the handling of sharps. It shall house a 5 quart container and be capable of being mounted on a wall. It shall have a glove dispenser attached. The unit shall be secured by a locked enclosure.

E. OPTICAL SHOP

1. EYEGLASS FITTING AND DISPLAY, AND DISPENSING ROOM (EYFD1)

2. STORAGE ROOM (SRE01)

3. SEATING AREA (FSCD1)

See Above: B. RETAIL STORE, 1. STORAGE, RETAIL (SRE01)

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECA5145 Hook, Garment, Double, SS, Surface Mounted 1 CC A surface mounted, satin finish stainless steel, double garment hook. Equipped with a


10 28 00

E0906 Locker, Supply, General, Wall Mtd, 23"W x 20"D 1 VV THIS TYPICAL INCLUDES:�1 Wall Mounted Rail�1 Locked Storage Container�2 Tray/Shelves�1 Drawer, 3"H (76mm)�3 Drawers, 6"H (152mm)�2 Drawers, 9"H (229mm)�1 Tray/Shelf Divider�Drawer Organizer Bins�Consider the need for an E0921 to transport the locker from place to place.

E1500 Rail, MOD, W/MNTD, HX144XD 1 VV Wall mounted rail used for hanging (mounting) lockers, shelves drawers on a wall.F0205 Chair, Side With Arms 1 VV Upholstered side chair, 32" high X 21" wide X 23" deep with arms, padded seats and padded

backs. Seat height is a minimum of 17". Available with or without sled base.

F0280 Chair, Swivel, Low Back 1 VV Low back contemporary swivel chair, 37" high X 25" wide X 31" deep with a five (5) caster swivel base, arms and foam padded seat and back upholstered with either woven textile fabric or vinyl.

F0340 Stool, Self Adjusting 1 VV Self adjusting stool. Consists of a foam padded upholstered seat with attached foot rest for added comfort. Mounted on swivel casters. Designed for doctor's use during examinations.





of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECM1825 Printer, Computer 1 VV High resolution computer printer with a variety of type styles and sheet/envelope feeder

trays. Database information reflects network ready, medium duty office style laser printers. Other types of printers (bubble jet, dot matrix, line or plotter) as well as light or heavy use capabilities are available.

M5010 Desk, Fitting/Dispensing, Optical 1 VV Fitting/dispensing optical desk. Cabinet section consists of one larger drawer at top with seven small tray drawers below or eight equal drawers. Top surface is made of durable high pressure plastic or wood. Specify cabinet section to be technician's right or left, color and finish. Many types of drawer dividers are available. Unit can be custom configured.

M5520 Lensometer 1 VV Lensometer. Unit includes lamps, prism measuring lens marking device, cylinder axis wheel calibrated in two 180 degree segments and a green filter for tinted glass. The instrument may be inclined between 25 to 90 degrees. Used for measuring lens.

M5705 Gauge, Distance, Papillary 1 VV Papillary distance gauge. Unit is electronic and features corneal reflection, LCD display, 0.5mm measurement increments, and measure fixation PD distance to 30 cm from infinity. Unit runs on battery power and is designed to measure the distance between pupils as well as corneal and pupil diameter.

M5735 Warmer, Spectacle, Plastic 1 VV Plastic spectacle warmer. Bath type. Thermostatically controlled. For use with glass beads or salt.

P3100 Lavatory, Vitreous China, Slab Type 1 CC Wall mounted, slab type, vitreous china, lavatory (approximate bowl size 7"x15"x10") with: faucet holes on 4" centers; gooseneck spout; wrist blade handles; and grid strainer. It shall be suitable for use in clinics, offices, washrooms or patient care area.

22 40 00

A1010 Telecommunication Outlet AR CC Telecommunication outlet location. 27 31 00A1016 Telephone, Desk, With Speaker 1 CC Telephone, desk, with speaker.A1066 Mirror, Float Glass, With SS Frame 1 CC A high quality 1/4" polished float glass mirror 36X18, framed in a one-piece, bright polished,

stainless steel channel frame with 90° mitered corners. All edges of the mirror are protected by absorbing filler strips. Mirror has a galvanized steel back with integral horizontal hanging brackets and wall hanger for concealed mounting. For mounting above single wall mounted lavatories located in toilet areas, Doctors examination offices, etc. May also be used above double lavatories, either wall or countertop mounted, found in restroom areas.

10 28 00


10 28 00


10 28 00

2. OFFICE, OPTICIAN / TECHNICIAN / STORAGE (EYOT2)

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECA5106 Waste Disposal Unit, Sharps w/Glove Dispenser 1 VV The unit is designed for the disposal of sharps and complies with OSHA guidelines for the

handling of sharps. It shall house a 5 quart container and be capable of being mounted on a wall. It shall have a glove dispenser attached. The unit shall be secured by a locked enclosure.

A5145 Hook, Garment, Double, SS, Surface Mounted AR CC A surface mounted, satin finish stainless steel, double garment hook. Equipped with a concealed mounting bracket that is secured to a concealed wall plate. For general purpose use throughout the facility to hang various items of apparel.

10 28 00




M1620 Holder, Chart, Patient, Wall or Door Mounted 1 CC Wall or door mounted patient chart holder. Constructed of durable plastic or metal. Used for holding patient records. Size as required.


M5016 Desk, Refraction w/console, w/o Sink 1 CC Refraction desk. This unit has a plastic laminated finish, one trail drawer with full suspension, and three storage electrical drawers with single door. It has a five switch control panel for interior room illustration muscle light, OPH project, lens-o-meter, and option for additional accessories, cameo with single bowl sink, and gooseneck faucet with wrist blade controls. This item may include an optional equipment stand/pole with one to three arms and the ability to accept a phoropter arm. The unit is used during eye examinations in ophthalmic clinics and hospitals. This unit requires special electrical hookup.

F0340 Stool, Self Adjusting 1 VV Self adjusting stool. Consists of a foam padded upholstered seat with attached foot rest for added comfort. Mounted on swivel casters. Designed for doctor's use during examinations.

M5520 Lensometer 1 VV Lensometer. Unit includes lamps, prism measuring lens marking device, cylinder axis wheel calibrated in two 180 degree segments and a green filter for tinted glass. The instrument may be inclined between 25 to 90 degrees. Used for measuring lens.

M5530 Lamp, Slit, w/Applanation Tonometer 1 VV Slit lamp with applanation tonometer. Unit consists of a base mounted ophthalmological slit lamp with head and chin rest and manual height and focusing adjustments. The instrument features a microscope head with parallel optics that will accept an applanation tonometer. Designed for use in ophthalmology during diagnostic examinations.

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECM5535 Ophthalmoscope, Binocular, Indirect 1 VV Binocular indirect ophthalmoscope. Unit consists of headband and crown, halogen quartz

lamp, multi-coated aspherical lenses, scleral depressor and mirror. It also includes a control switch that regulates the illumination from 2 to 6 volts. Used to examine presence of blood vessels in patient's pupils.

M5545 Ophthalmometer/Keratometer 1 VV Keratometer/ophthalmometer. Unit features a focusing system, engraved focusing scale, positive fixation for rapid measurements, center and peripheral corneal measurements scale with a range from 30D to 60D. Unit is used for measuring corneal astigmatism.

M5600 Unit, Exam, Eye, w/Motor Chair, Phoropter 1 VV Eye exam phoropter unit with motor operated chair. Unit consists of an adjustable chair, and phoropter unit for eye examination, mounted on a stand. Stand includes an additive tray with keratometer arm and tray and a integral instrument tray. Unit is designed for use during ophthalmic examinations.

M5700 Frame Set, Lens, Trial 1 VV Trial lens frame set. Set consists of light weight and color-coded marked lenses, holding tray, and a complete assortment of other accessories. It is used to determine visual acuity. Set features horizontal and vertical bridge adjustments with individual adjustments for temple length and angle.

P3100 Lavatory, Vitreous China, Slab Type 1 CC Wall mounted, slab type, vitreous china, lavatory (approximate bowl size 7"x15"x10") with: faucet holes on 4" centers; gooseneck spout; wrist blade handles; and grid strainer. It shall be suitable for use in clinics, offices, washrooms or patient care area.

22 40 00

1. BARBER / BEAUTY SHOP (XXYYC)

F. BARBER / BEAUTY SHOP

EQUIPPED BY OTHERS

2. STORAGE, NON-FOOD (SRS01)See Above: B. RETAIL STORE, 2. RECEIVING AREA (MMRP1)

See Above: B. RETAIL STORE, 3. STORAGE, REMOTE, RECEIVING AREA (SRS01)

G. FOOD COURT - SUPPORT AREAS

1. RECEIVING, FOOD COURT (MMRP1)See Above: B. RETAIL STORE, 2. RECEIVING AREA (MMRP1)

3. STORAGE, DRY FOOD (SRS01)

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPEC

M2070 Shelving, Storage, 77hx36wx18d AR VV Storage shelving unit approximately 77" H X 36" W X 18" D. Corrosion resistant baked enamel, galvanized or stainless steel open unit with adjustable shelves. The closed version is also available. For use in the storage room.

R6100 Freezer, Food, Upright, CRS, 23 CUFT AR CC Food freezer approximately 23 CUFT and 84" H x 27" W x 37" D. This unit has a stainless steel case front and doors. The cabinet front and doors are constructed of heavy gauge polished stainless steel to maintain an attractive appearance. The heavy-duty wire shelves are adjustable in one inch increments, used for frozen food storage in food service departments.

11 41 00

R7400 Refrigerator, 45 Cubic Feet ARVV

Commercial refrigerator, 45 cubic feet approximately 84" H x 55" W x 35" D. This unit is a commercial design, general purpose unit, used to store perishable items in laboratories.

F2020 Can, Trash, 44 Gallon 1 VV Forty four (44) gallon trash can, 32" high X 24" diameter, with lid. Used to collect and transport refuse from a point of origin to point of disposal (example: from soiled utility or a nursing unit to the trash compactor at housekeeping).

K1910 Table, Work, Stainless Steel AR 1 Work table approximately 36x120x30. The table is made of heavy duty stainless steel with all edges rolled down at 90 degrees. The edges are 2" high and have rounded corners. The table has stainless steel legs and a stainless steel under-shelf. The unit is used as a work station in large kitchens, hotels, restaurants and hospitals.

A1066 Mirror, Float Glass, With SS Frame AR CC A high quality 1/4" polished float glass mirror 36X18, framed in a one-piece, bright polished, stainless steel channel frame with 90° mitered corners. All edges of the mirror are protected by absorbing filler strips. Mirror has a galvanized steel back with integral horizontal hanging brackets and wall hanger for concealed mounting. For mounting above single wall mounted lavatories located in toilet areas, Doctors examination offices, etc. May also be used above double lavatories, either wall or countertop mounted, found in restroom areas.

10 28 00


10 28 00


10 28 00


4. STORAGE, REFRIGERATED AND FROZEN FOOD (RER01)

5. FOOD PREPARATION AND PRODUCTION (FSTD1)

6. DISH WASHING AREA (FSDW1)

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECK1695 Conveyor, Meal Tray Return 1 CC Fixed conveyor for returning soiled meal trays from the main dining room to the tray

processing area for cleaning. The database pricing is based on 24 feet of straight conveyor and 4 corner sections. This conveyor could lead to a second conveyor for tray processing or directly to a dishwasher with tray processing en route. Multiple power outlets will be required depending on the conveyors length.

11 48 00

K1800 Sink/Drainboard, Dishwashing, Triple Bowl 1 CC Triple bowl dishwashing sink with two drainboard counters. The sink is made of 16 gauge stainless steel, has three 20" x 20" sink bowls, has supporting legs and/or wall attachment points and is pre-drilled for faucet and drain connections. Custom sized units are available. The database price includes the cost of welding the disposal cone to the bottom of one sink. See JSN K2620 for disposal units and JSN K9320 for accessory spray arms. The database height dimension is to the top of the backsplash; see the specification sheets for the sink rim height. Larger and smaller units are available as well as units with fewer sink bowls. This unit is used to wash dishes in institutions and commercial kitchens.

11 48 00

K2020 Dispenser, Detergent, Automatic AR CC Automatic detergent dispenser. Characteristics/components include supporting chemicals; detergent additive and rinse additive. This unit is used in conjunction with commercial dishwashers in hospitals and restaurants. Wall mounted unit. Sized for the operation.

11 48 00

K2290 Dishwasher, Conveyor, Steam, 2 Tank AR CC Automatic dishwasher which uses steam to heat the water in its two tanks. The unit is constructed of stainless steel and has a pre-wash, wash and rinse cycle. A 1/10 HP or larger electric motor powers the conveyor on which the dishracks ride. Three 1 HP or larger motors power the pre-wash, wash and rinse water circulating pumps. The unit collects and disposes of food dislodged from dishware, has curtains at each end and has large doors for inspection of the machine. The dishwasher's controls are mounted for ease of operator use. Optional blower/dryer units remove the last of the rinse water. Accessory condensing units may eliminate the need to vent the dishwasher to the atmosphere. Propane, natural gas and electrically heated models are also available. Because they vary widely from model to model, the dishwasher's final physical and utility configurations should be carefully reconciled with the facility drawings. The database height dimension reflects the clearance required to raise a machine door for servicing but not the clearance required beneath a ventilation hood. The machine listed in the database is each manufacturer's top line unit for th

11 48 00

K2620 Disposal, Waste, Heavy Duty 1 CC Food waste disposal. The unit has a 10 HP heavy duty motor, a heavy cast alloy body, a 3 inch outlet and a cast-in deflector in upper chamber that force feeds waste down onto a 15" rotor. This unit is used for disposing large quantities of the heavy waste material generated in the central areas of commercial and institutional food service operations.

11 48 00

K3420 Hose, Retractable, Wall Mounted 1 CC Retractable hose. The hose is wall mounted and has a stainless steel casing. The unit is used for washing and spraying down areas in commercial and institutional food service operations.

11 48 00

K6670 Sink, Soak, Mobile, 1 Compartment 1 CC Mobile soak sink. This is a single compartment stainless steel unit. The sink legs are fitted with 4 or 5 inch swivel casters. Two casters have foot locking brakes. The unit is used in kitchens for soaking flatware and other kitchen items.

11 48 00

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECK9320 Hose, Spray, Pre-Rinse 1 CC Pre-rinse spray hose. The unit is a chrome plated wall or back deck mount design used to

rinse dishes before racking in the dishwasher. It has a dual lever control which permits quick water temperature selection, large non-slip grip spray valve and spring loaded goose neck with storage hook.

11 48 00

K9450 Washer, Tray, Automatic Stacking, Electric 1 CC Tray washer. This unit has eye thermometers, vacuum breaker, motor starter and standard overload protection mounted in a stainless steel enclosure. The unit features a remote stop button on the unloading side of the unit. The continuously moving belt has fingers or racks for easily mounting trays for cleaning. The database height dimension includes the clearance to open and remove a door panel. These washers vary widely in length and capacity; consult the manufacturer's specifications for the specific model. This washer can be found in food service operations of hotels, restaurants and hospitals.

11 48 00

P3000 Lavatory, Vitreous China, Straight Back 1 CC Wall mounted, vitreous china lavatory (approximate bowl size 7"x15"x10") with: straight-front apron, straight or contoured back; faucet holes on 4" centers; gooseneck spout; wrist blade handles; and grid strainer. It shall be suitable for use in clinics, offices, washrooms or patient care areas.

22 40 00

A5145 Hook, Garment, Double, SS, Surface Mounted 4 CC A surface mounted, satin finish stainless steel, double garment hook. Equipped with a concealed mounting bracket that is secured to a concealed wall plate. For general purpose use throughout the facility to hang various items of apparel.

K1860 Sink, Pot, Triple Compartment, w/Drainboards 1 CC Pot washing and scraping counter. This unit has three sink compartments and is constructed of stainless steel. The dimensions should be specified as required. See JSN K2620 for disposers and K9320 for pre-rinse hoses. Some models are built to accommodate two faucets. See related dishwashing and scullery triple compartment sinks at JSNs K1800 and K6660. This unit is used to wash pots in food service operations of hospitals, hotels and restaurants.

11 48 00

K2620 Disposal, Waste, Heavy Duty 1 CC Food waste disposal. The unit has a 10 HP heavy duty motor, a heavy cast alloy body, a 3 inch outlet and a cast-in deflector in upper chamber that force feeds waste down onto a 15" rotor. This unit is used for disposing large quantities of the heavy waste material generated in the central areas of commercial and institutional food service operations.

11 48 00

K3420 Hose, Retractable, Wall Mounted 1 CC Retractable hose. The hose is wall mounted and has a stainless steel casing. The unit is used for washing and spraying down areas in commercial and institutional food service operations.

11 48 00

K8200 Rack, Wash, Pan/Utensil 1 CC Pan and utensil wash rack. This unit can be a set of racks to accommodate a specific dishwashing unit. The racks are all stainless steel and can be used in large food service operations for cleaning pots and pans.

11 48 00

7. POT WASHING AREA (FSPW1)

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECK8500 Rack, Tray/Pan, Mobile, CRS, Light/Medium Duty 1 VV Mobile tray and pan rack. The rack is made of stainless steel or aluminum and has matched

ledges for holding trays and pans. The rack is mounted on medium duty casters. Racks are available in various heights, with channel or angled ledges and in several ledge spacing intervals. The size of the facility's pans and trays will determine the exact model procured. The rack is used to bus dirty trays from the serving line for cleaning and washing.

11 48 00

K9300 Washer, Pressure w/Sanitizer 1 CC Pressure washer for cleaning and sanitizing kitchen or other areas. This is a wall mounted, motor operated unit with a spray gun. The washer sprays a detergent solution on each item to be cleaned and then rinses them using a combination of water and high pressure that blasts away the loosened dirt and grease. The washer can be either a stand alone unit or part of a set of stations operating from a central control. See JSN K1350 for the mobile version of this unit. The unit is used for cleaning in commercial areas and institutions such as hospitals.

11 48 00

K9760 Washer, Pot/Pan, Electric 1 CC Pot and pan washer. This unit's wash and rinse cycles pump water and cleaning solution under pressure through its upper and lower spray arms. The washer cleans pots, large preparation bowls and kitchen appliance parts. The unit drains after each cycle. The database information is for a straight pass through unit with an electric tank heater. Corner units and units with chemical or low temperature sterilization are available. The database physical specifications include the clearance needed to remove the unit's vertical doors and the extra footprint of exterior mounted control boxes and pipe connections. This unit is used in hospitals and large food service areas.

11 48 00

K9770 Washer, Pot/Pan, Steam And Electric 1 CC Pot and pan washer with a steam heated tank. The washer is made of stainless steel and has a 5 HP wash pump motor, hot water spray rinse, sanitizing hot fresh water rinse, steam or electric water temperature booster, exhaust fan and basket screens. See K8200 for the washing racks for this machine.

11 48 00

F2026 Container, Recycling, Large AR VV Recycling container shall be approximately 30-gallons in capacity. The container may include a lid and be Recycle Blue in color with the recycle symbol identified on the container.

M2070 Shelving, Storage, 77hx36wx18d AR VV Storage shelving unit approximately 77" H X 36" W X 18" D. Corrosion resistant baked enamel, galvanized or stainless steel open unit with adjustable shelves. The closed version is also available. For use in the storage room.

P2450 Valve, Mixing, Thermostatic 1 CC Thermostatic mixing valve with washout hose. Used with portable whirlpool equipment. Thermostatic valve is used to maintain temperature between 70 and 110 degree Fahrenheit, with a flow rate of 20 gallons a minute. The washout hose assembly used to wash out tanks after treatment. Used in physical therapy department to provide comfortable water temperature for patient treatments.

P5210 Shower, Safety, Freestanding, With Eye/Face Wash 1 CC Deluge safety shower. This is a complete, maximum protection safety station consisting of a free-standing emergency shower and an eye/face wash fixture. Used anywhere exposure to hazardous substances may occur.

8. SANITATION AND RECYCLING AREA (SRHM1)

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPEC



K3370 Pulper/Grinder, Water Fed, Freestanding 1 CC Freestanding pulper/grinder for food waste disposal. The unit grinds food waste into small pieces and uses a water press to remove fluids. The product is a waste slurry with less volume, with less water content and which is less susceptible to the immediate microorganism growth which generates foul odors. The database price for the unit includes an accessory table/trough but the pulper can be integrated into a dishwasher conveyor system to save floor space. The pulper units listed on the database process 475 lb. per hour and has a series of motors totaling at least 7 HP. Multiple drains may be required for the unit. Larger pulpers are available which process up to 3,000 lb. per hour. Model numbers vary according to the orientation of the input and output chutes. The pulper chosen for installation must be verified against the final kitchen utility and plumbing configuration to ensure compatibility.

11 48 00

A1010 Telecommunication Outlet AR CC Telecommunication outlet location. 27 31 00A1012 Telephone, Wall Mounted, 1 Line 1 CC Telephone, wall mounted, 1 line. 27 31 00A6046 Artwork, Decorative, With Frame AR VV This JSN is to be used for determining and defining location of decorative artwork.F0225 Chair, Dining Room AR VV Dining room chair with glides. Chair has straight legs with cushioned cloth or vinyl seat.

F0230 Chair, Drafting, Rotary 2 VV Drafting chair approximately 47" high X 20" wide X 20" deep with rotary stool and a 5 (five) star base with casters. Padded seat and back. Foot ring adjusts with chair.

F0795 Table, Dining AR VV Dining table. Round 42" diameter or square 42" X 42". Used in dining facilities and can comfortably seat up to four (4) persons.

9. TRASH HOLDING REFRIGERATED ROOM (UTC01)

10. WASTER PULPER SYSTEM ROOM (UTC01)

11. HOUSEKEEPING AIDES CLOSET (HAC) (JANC1)

H. CAFETERIA - SERVING AREA

1. DINING AREA (FSCD1)

See Above: B. RETAIL STORE, 6. HOUSEKEEPING AIDES CLOSET (HAC) (JANC1)

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECF2125 Cash Register, With Locking Drawer AR VV Electronic cash register system. This unit includes multiple menu capabilities. Equipped

with removable cash drawer for complete security. Calculator function and tax table. Convenience outlet required at point of use.

F3070 Case, Display AR VV Display case. Equipped with glass doors, adjustable glass shelves, security locks and choice of either fabric or mirror backing.


A1010 Telecommunication Outlet AR CC Telecommunication outlet location. 27 31 00A1012 Telephone, Wall Mounted, 1 Line 1 CC Telephone, wall mounted, 1 line. 27 31 00A5080 Dispenser, Paper Towel, SS, Surface Mounted AR CC A surface mounted, satin finish stainless steel, single-fold, paper towel dispenser.

Dispenser features: tumbler lock; front hinged at bottom; and refill indicator slot. Minimum capacity 400 single-fold paper towels. For general purpose use throughout the facility.

10 28 00

K0500 Baker, Waffle, Dual Plate 1 VV Waffle baker. The baker has two 7 inch diameter pans, side by side in a single machine or is two single pan units side by side. The grids are removable for cleaning and the cabinet is constructed of stainless steel. The database height dimensions are for an open pan. Two separate electrical outlets may be needed for two single units operating side by side. It is used in large restaurants and food service operations for hot waffles.

11 44 00

K1000 Cabinet, Pastry, Mobile, Medium 1 CC Mobile pastry cabinet. The cabinet is made from aluminum or stainless steel, is mounted on four swivel casters and holds thirty 18 inch by 26 inch full sheet pans. The cabinet can be equipped with push handles and bumpers (which will change the exterior dimensions). Smaller capacity units are available. For larger capacity units see JSN K1010. The cabinet is used for storage and transport of pastries in hotels, restaurants, hospitals, and commercial food service operations.

11 44 00

K1160 Cabinet, Warming, Pass-Thru, CRS 1 CC Mobile or stationary warming cabinet. This is a pass-through model with doors that can be opened from either side for easy use. The cabinet can have single or double Dutch doors on either or both sides. The unit has an exterior temperature gauge for easy monitoring. The cabinet has a slide in humidity pan or controlled humidity vents in the top of the cabinet. Some models run on 120V power, others on 208V. Refer to the manufacturers specification sheets. The database electrical specifications cover both possibilities. The unit is used in commercial and hospital kitchens for warming prepared food items.

11 44 00

1. SERVING AREA (FSSL1)

I. CAFETERIA - DINING AREA

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECK1600 Counter, Cafeteria, Cold Food, Mobile, 5-Pan 1 CC Mobile cold food cafeteria counter. The counter features a refrigeration unit with coils

around the counter compartment, an open compartment top which can hold five 12" x 20" pans, a double display shelf above the counter unit, sneeze guards, a drop-type solid or three rail tray slide, a server's workshelf, open shelving on the server's side and four 5" swivel casters. Some manufacturers offer a second refrigerated section below the cold pan. The exact unit dimensions depend on the specific manufacturer; refer to the technical data sheets. The database depth dimension does not include the fold down tray rail but does include the 8-10" working shelf on the server's side. The unit is used for self-service of cold food in cafeterias and commercial food service areas.

11 44 00

K1650 Counter, Cafeteria, Hot Food, Mobile, 5-Pan 1 CC Mobile, hot food cafeteria counter. This unit has a top compartment capable of holding five (5) 12" by 20" pans, a full length food display shelf with sneeze guard, a drop-type solid or three rail tray slide, four (4) 5 inch swivel casters, shelving underneath the warming wells and a work shelf on the server's side. The complete unit is insulated as is each well. Each well is also individually thermostatically controlled with an individual heating element. The exact unit dimensions depend on the specific manufacturer; refer to the technical data sheets. The database depth dimension does not include the fold down tray rail but does include the 8-10" working shelf on the server's side. The unit is used in hospitals, schools and commercial food service establishments.

11 44 00

K1710 Counter, Cafeteria, Utility, W/Power 61x80x42 2 CC Mobile cafeteria counter. The counter can serve as a mobile utility table and has a double-shelf food display case with sneeze guard, a drop-type solid or three rail tray slide, 120V AC outlets, a work shelf, below the counter shelves and four 5-inch swivel casters. The end user must specify the outlet requirements and configuration. Multiple facility-level outlets may be required depending on the number of convenience outlets the end user requires. The database depth dimension does not include the fold down tray rail but does include the 8-10" working shelf on the server's side. This unit is used in commercial and hospital service areas.

11 44 00

K1750 Counter, Cafeteria, Mobile, Utility 1 CC Mobile cafeteria counter, approximately 36"H x 80"L x 32"D. The counter is made of stainless steel construction, has intermediate and bottom shelves on the working side, a drop-type solid or three rail tray slide and 5-inch swivel casters. The database depth does not include the depth of the tray slide. It is used for service of food items in hospitals and restaurants.

11 44 00

K2040 Dispenser, Iced Tea 1 VV Instant tea beverage dispenser. The unit uses either liquid concentrate tea or a brewing system to provide consistent tea in a continuous flow dispensing system. The unit is used to dispense instant tea in hotels, restaurants, hospitals, clubs and other food service operations.

K2050 Dispenser, Bread, CRS, 2 Compartment 1 VV Bread dispenser. This unit is either an in-counter two compartment system consisting of two sleeves and a facing plate or an above the counter unit holding two or three loaves. The in-counter units have self-leveling dispensers and covers. Either system will store two or three loaves. The unit is designed for use on work boards, sandwich counters, salad bars and other service points.

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECK2080 Dispenser, Milk, Mobile, Individual Container 1 VV Milk dispenser cabinet. The cabinet is made of stainless steel which is welded, ground and

polished to a uniform finish. The convenient reach-in cooler stores milk or beverages by case or individually stacked container. The dispenser can be used as an individual server or as part of a continuous serving line. The unit is used in food service areas for self-service issue of milk in schools, restaurants and hospitals.

K2085 Dispenser, Milk, Bulk, Double 1 CC Milk dispenser cabinet. The stainless steel cabinet has two lift valves for dispensing milk, a capacity of twelve total gallons, magnetic door seals and a self-contained mechanical refrigeration system. This unit is used for self-service of milk in cafeteria of schools, hospitals and commercial restaurants.

11 44 00

K2100 Dispenser, Cream, Eutectic, 2 Quart 2 VV Portable 2 quart cream dispenser. The unit uses a sealed re-freezable (eutectic) cooling element to keep cream cold for up to four hours. The unit features portion control, has stainless steel product contact areas, can be permanently mounted and is easily cleaned.

K2110 Dispenser, Drink, Non-Carbonated 1 VV Non-carbonated drink dispenser. The unit has a 3-5 gallon capacity beverage bowl with a cover. This unit serves non-carbonated drinks to patients in hospitals.

K2111 Dispenser, Drink, Non-Carbonated w/Refrigeration 1 VV Non-carbonated drink dispenser with a refrigeration unit. The unit cools or maintains the coldness of liquid or frozen drinks during serving.

K2115 Dispenser, Drink, Carbonated 1 VV Carbonated drink dispenser. The unit dispenses eight carbonated beverages and ice from a self service counter machine. The ice hopper holds 100 lb. of ice and may be connected to a remote ice maker from which it automatically loads ice. If not connected to an ice maker, the unit's ice bin will require manual refilling. The unit does not include the syrup racks, mixing valves, carbon dioxide supply or the chilled water pump. This unit is used to dispense cold carbonated drinks in food service activities.

K2120 Dispenser, Cup/Saucer, Unheated, Mobile, 4 Stack 1 VV Mobile, unheated cup and saucer dispenser. The cabinet is made of stainless steel, is mounted on four casters and has a full perimeter strip bumper. The unit includes four self-leveling dispensing stacks which are sized to match or are self-adjusting to match the size of the dishware being stored. Heated units, units which hold less than four self-leveling dispensers and units which store larger dishes are also available. The facility's selection of dishware ultimately determines which exact model will be required. The unit is used for self-service of tableware in food service operations.

K2130 Dispenser, Plate, Mobile, Unheated, 4 Stack 2 VV Mobile, unheated dinner plate dispenser. The cabinet is made of stainless steel, is mounted on four casters and has a full perimeter strip bumper. The unit includes four self-leveling dispensing stacks which are sized to match the size of the plates being stored. See JSN K2140 for a heated 4 stack unit and JSN K2160 for a heated 2 stack unit. Other units are available. The database specifications refer to units which hold 10" plates. The facility's selection of dishware ultimately determines which exact model will be required. The unit is used to dispense dishes in food service facilities, restaurants and hospitals.

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECK2140 Dispenser, Plate, Mobile, Heated, 4 Stack 1 VV Mobile, heated dinner plate dispenser. The cabinet is made of stainless steel, is mounted

on four heavy duty casters and has a full perimeter strip bumper. The unit includes four self-leveling dispensing stacks which are sized to match the size of the plates being stored. See JSN K2130 for an unheated 4 stack unit and JSN K2160 for a heated 2 stack unit. Heated and unheated units with other capacities are available. The database specifications refer to units which hold 10" plates. The facility's selection of dishware ultimately determines which exact model will be required. The unit is used to dispense plates in food service facilities, restaurants and hospitals.

K2150 Dispenser, Drinking Glass, Mobile 2 VV Mobile drinking glass dispenser. The unit is made of heavy gauge stainless steel, is enclosed on all four sides and mounted on four heavy duty casters. The unit stores racks filled with drinking glasses and holds the top rack at a constant dispensing height for customer convenience. Stationary units, units with open sides and cantilever style units are also available. This unit is used to dispense glasses in food service operations of hospitals and restaurants.

K2160 Dispenser, Plate, Mobile, Heated, 2 Stack 2 VV Mobile, heated dinner plate dispenser. The dispenser is made of stainless steel, is mounted on four casters, has closed sides and has a full perimeter strip bumper. The unit includes two self-leveling dispensing stacks which are sized to match the size of the plates being stored. See JSN K2140 for a heated 4 stack unit and JSN K2130 for an unheated 4 stack unit. Other unit configurations are also available. The facility's selection of dishware ultimately determines which exact dispenser model will be required. The database specifications are for units holding 12" plates. The unit is used to dispense dishes in food service facilities, hospitals and restaurants.

K2180 Dispenser, Meal Tray, w/Flatware Cylinders 1 VV Twin stack stainless steel meal tray dispenser with an eight to ten cylinder silverware dispenser above. The dispenser can be mobile or stationary. Self-leveling dispensers are available. Some models have decorative laminating over portions of the stainless steel.

K2200 Dispenser, Bowl/Plate, Mobile, Unheated, 4 Stack 1 VV Mobile, unheated bowl and small plate dispenser. The unit is made from stainless steel, is mounted on four casters and has a full perimeter strip bumper. The unit includes four self-leveling, adjusting dispensing stacks which adjust to the size of the dishware being stored and keep the next available dish at a convenient height for removal. The unit is easily cleaned. Heated, non-self adjusting and units with less than four stacks are also available. See JSNs K2210 and K2220 for 2 stack heated and unheated models. The database specifications are for a unit holding bowls and plates between 4-1/4" and 7" in diameter. The facility's selection of dishware ultimately determines which exact model is required. The unit is used to dispense bowls and small plates in food service operations, hotels, restaurants and hospitals.

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECK2220 Dispenser, Bowl/Plate, Mobile, Unheated, 2 Stack 2 VV Meal tray dispenser. The dispenser is made of stainless steel, is mounted on heavy duty

casters with brakes on at least two casters and has protective bumpers. Self-leveling springs keep trays at a convenient height for use. The dispenser can hold either 14" x 18" or 15" x 20" meal trays. Cantilever, fully enclosed and open side models are available. Many models offer cutlery/silverware dispensers as optional attachments. Tray dispensers are used in serving lines and tray makeup lines in food service operations in hotels, restaurants and hospitals.

K2230 Dispenser, Meal Tray, Mobile 1 VV Hot chocolate dispenser. This is an electric, counter mounted unit. The dispenser provides portion-controlled, single cup size servings in commercial and institutional food service operations.

K2240 Dispenser, Hot Chocolate, Counter Mounted 1 VV Ice-cream dispenser. The dispenser is made of stainless steel and uses a gravity freezer. The unit can serve either of two flavors or a twist combination. Unit is used to serve frozen desserts in commercial and institutional food service operations.

K2270 Dispenser, Ice Cream, Soft, Freestanding 1 CC Two basket electric deep fat fryer. The unit is freestanding, holds 30-35 lb. of hot oil, has leveling legs, swing up or removable corrosion resistant heating elements, solid state or programmable controls, self-diagnostics, a backsplash and an electronic or thermostatic over-temperature shutoff. The basic unit has painted sides, an aluminized back and a stainless steel front and top; a full stainless steel enclosure is optional. Some models have automatic basket lifts. The database height dimension refers to a unit with its coils lifted for cleaning.

K2800 Fryer, Electric, 30 Lb. Capacity, Free Standing 1 CC Two basket electric deep fat fryer. The unit is freestanding, holds 30-35 lb. of hot oil, has leveling legs, swing up or removable corrosion resistant heating elements, solid state or programmable controls, self-diagnostics, a backsplash and an electronic or thermostatic over-temperature shutoff. The basic unit has painted sides, an aluminized back and a stainless steel front and top; a full stainless steel enclosure is optional. Some models have automatic basket lifts. The database height dimension refers to a unit with its coils lifted for cleaning.

K3100 Griddle, Electric, Counter Mounted, 36" Wide 1 CC Electric griddle. The griddle has a 1/2 inch thick (or greater) steel heating surface, stands on legs on top of a counter, has a thermostat control for each linear foot of griddle and has a drippings channel which empties into a grease drawer for easy cleaning. The griddle has side and rear splash guards. Some manufacturers offer models of differing depths. The model chosen should match the supporting counter or table. The database specifications and pricing reflect a standard depth unit. The griddle is used for food preparation in commercial and institutional food service operations.

11 44 00

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECK3400 Hood, Exhaust, Kitchen 1 CC Stainless steel kitchen exhaust hood. The unit has removable grease filters for use over

any area, is fabricated to dimensions as required, provides for forced upward air flow through a hood and the grease filter and can pull the exhaust down through a vent and dissipate it below the kitchen to an outside area with complete automatic grease extraction. The database reflects the requirements for a 12 foot wide unit. The database price does not include the filter elements. The database electrical requirements are for any light fixture that is part of the hood. The fan that draws the air from this unit is not part of this unit. This hood facilitates exhaust dissipation in commercial and institutional food service operations.

23 38 13

K3560 Cabinet, Ice Cream, Mobile, Self-Service 1 CC Two basket electric deep fat fryer. The unit is freestanding, holds 30-35 lb. of hot oil, has leveling legs, swing up or removable corrosion resistant heating elements, solid state or programmable controls, self-diagnostics, a backsplash and an electronic or thermostatic over-temperature shutoff. The basic unit has painted sides, an aluminized back and a stainless steel front and top; a full stainless steel enclosure is optional. Some models have automatic basket lifts. The database height dimension refers to a unit with its coils lifted for cleaning.

11 44 00

K6245 Cabinet/Server, Heated, 2 Drawer/Compartment 1 CC Electric griddle. The griddle has a 1/2 inch thick (or greater) steel heating surface, stands on legs on top of a counter, has a thermostat control for each linear foot of griddle and has a drippings channel which empties into a grease drawer for easy cleaning. The griddle has side and rear splash guards. Some manufacturers offer models of differing depths. The model chosen should match the supporting counter or table. The database specifications and pricing reflect a standard depth unit. The griddle is used for food preparation in commercial and institutional food service operations.

11 44 00

K7250 Table, Food Preparation, CRS, Mobile 1 CC Retractable hose. The hose is wall mounted and has a stainless steel casing. The unit is used for washing and spraying down areas in commercial and institutional food service operations.

11 44 00

K8400 Toaster, Conveyor, 600 Slices/Hr, Electric 1 CC Ice cream cabinet for self-service. The cabinet has stainless steel/galvanized steel double walled sides with formed-in-place polyurethane insulation on all sides and the bottom, adjustable temperature control, removable cover, a drain from the inner compartment and externally mounted dial thermometer. The cabinet can be placed adjacent to a food service counter during service of meals.

11 44 00

K8500 Rack, Tray/Pan, Mobile, CRS, Light/Medium Duty 1 VV Mobile tray and pan rack. The rack is made of stainless steel or aluminum and has matched ledges for holding trays and pans. The rack is mounted on medium duty casters. Racks are available in various heights, with channel or angled ledges and in several ledge spacing intervals. The size of the facility's pans and trays will determine the exact model procured. The rack is used to bus dirty trays from the serving line for cleaning and washing.

K8920 Urn, Coffee, 2 Sections, 6 Gallons Each, Electric 1 CC Electric twin coffee urn (without stand) with a total capacity of twelve (12) gallons, six (6) in each urn, adjustable by-pass and an automatic agitator. The unit is used in hospital food service operations for preparing large volumes of fresh coffee.

11 44 00

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECP3000 Lavatory, Vitreous China, Straight Back 1 CC Wall mounted, vitreous china lavatory (approximate bowl size 7"x15"x10") with: straight-front

apron, straight or contoured back; faucet holes on 4" centers; gooseneck spout; wrist blade handles; and grid strainer. It shall be suitable for use in clinics, offices, washrooms or patient care areas.

11 44 00

R4650 Ice Maker, Flaked, With Dispenser 1 CC Ice maker dispenser approximately 71" H x 19"D x 24"W. This unit provides flaked ice and cooled water automatically. The unit has a daily capacity up to 650 pounds and a 100 pound capacity stainless steel storage compartment with water station. It is a freestanding, automatic load ice dispenser for food service and healthcare use. The unit stores 50 pounds of ice and produces approximately 400 pounds of ice in a 24 hour period. The unit is used in healthcare institutions and various commercial food service operations for dispensing ice.

11 44 00

A6030 Machine, Vending AR This JSN is to be used for determining and defining the requirement for vending machines. Item is normally leased or supplied by Army & Air Force Exchange Service, (AAFES).

A1010 Telecommunication outlet 1 CC Telecommunication outlet location. 27 31 00A1012 Telephone, Wall mounted, one line 1 CC Telephone, wall mounted, 1 line. 27 31 00A1035 Locker, Single Tier 1 VV Locker, single tier, approximately 72" H x 12" W x 18" D. Unit includes coat hooks, hanger

rod, and ventilating louvers. Door latch permits the use of a padlock. For storage of personal belongings.

or A1040 Locker, 2 Person, Side by Side, 72x15x18 AR VV Two person locker, double tier, 72Hx12Wx18D. This unit includes hooks for coats and hats.

Door equipped with safety guard handles. Designed for storage of coats, hats, and other personal belongings. Other width and depths are available.

A1080 Mirror, Posture, Wall Mounted AR CC Wall mounted posture mirror. Consists of a 1/4" plate glass in a sturdy corrosion resistant frame with water proof back. For educational and therapy programs.

10 28 00

A5025 Bench, Locker Room, Portable 1 VV Locker room bench. Floor mounting -1-1/4" thick. Benches are sanded smooth with two coats of moisture-resistant sealer to ensure a protective, satin gloss surface, and mounted on strong steel pedestal anchored to the floor. Over all height of 18" includes pedestal. Size as required.

-OR-

J. VENDING

1. VENDING MACHINE AREA (BX001)

K. LOCKERS, LOUNGES, TOILETS

1. LOCKER ROOM , STAFF (LR001)

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECA5020 Bench, Locker Room, Floor Mounted AR VV Portable locker room bench. Approximately 1-1/2" thick. Benches shall be laminated

hardwood with a moisture resistant sealer or anodized aluminum Units are mounted on strong pedestals.


10 28 00

A5180 Track, Cubicle, Surface Mounted, With Curtain 1 CC Surface mounted cubicle track, with curtain. Track constructed of thick extruded aluminum. Equipped with self lubricating carriers, beaded drop chain hooks, and flame resistant curtain. To include removable end caps. Designed to be suspended around patient areas where privacy is needed. Price listed is per foot of the track, curtains to be priced per quote.

10 21 23


A1066 Mirror, Float Glass, With SS Frame AR CC A high quality 1/4" polished float glass mirror 36X18, framed in a one-piece, bright polished, stainless steel channel frame with 90° mitered corners. All edges of the mirror are protected by absorbing filler strips. Mirror has a galvanized steel back with integral horizontal hanging brackets and wall hanger for concealed mounting. For mounting above single wall mounted lavatories located in toilet areas, Doctors examination offices, etc. May also be used above double lavatories, either wall or countertop mounted, found in restroom areas.

10 28 00

A5075 Dispenser, Soap, Disposable AR VV Disposable soap dispenser. One-handed dispensing operation. Designed to accommodate disposable soap cartridge and valve.

A5080 Dispenser, Paper Towel, SS, Surface Mounted AR CC A surface mounted, satin finish stainless steel, single-fold, paper towel dispenser. Dispenser features: tumbler lock; front hinged at bottom; and refill indicator slot. Minimum capacity 400 single-fold paper towels. For general purpose use throughout the facility.

10 28 00

A5090 Disposal, Sanitary Napkin, SS, Surface Mounted AR CC A surface mounted, satin finish stainless steel, sanitary napkin disposal. Disposal features a flip-up cover, secured to the container by a heavy duty stainless steel piano-hinge. Disposal may be secured to wall or toilet partition. For general purpose use in female toilet stalls or rooms and uni-sex toilet rooms.

10 28 00

A5109 Grab Bar, 1-1/4" Dia., SS, 2 Wall, W/C Accessible AR CC A 1-1/4" diameter, satin finish stainless steel, peened gripping surface, 2 wall toilet stall/ room, grab bar with concealed mounting flanges. Snap over flanges are provided to conceal mounting screws. A selection of mounting kits and concealed anchor devices are available from the manufacturers for different types of installations. Grab bar shall comply with barrier-free accessibility guidelines for structural strength. For typical water closet applications in toilet stalls and rooms where ADA (American's With Disabilities Act) requirements must be met.

10 28 00


10 28 00

2. TOILET, STAFF (TLTU1)

of 29


June 2008

JSN NAME QTY ACQ / INS DESCRIPTION SPECA5200 Dispenser, Toilet Tissue, SS, 2-Roll, Surface Mntd AR CC A concealed surface mounted, double roll, satin finish stainless steel, toilet tissue dispenser.

Unit accommodates two standard-core toilet tissue rolls through 5" in diameter. Spindles are chrome plated plastic with a heavy-duty internal spring and turn freely for non-controlled delivery. For general purpose use in restrooms.

10 28 00

F2000 Basket, Wastepaper, Round, Metal AR VV Round wastepaper basket, approximately 18" high X 16" diameter. This metal unit is used to collect and temporarily store small quantities of paper refuse in patient rooms, administrative areas and nursing stations.

P3100 Lavatory, Vitreous China, Slab Type AR CC Wall mounted, slab type, vitreous china, lavatory (approximate bowl size 7"x15"x10") with: faucet holes on 4" centers; gooseneck spout; wrist blade handles; and grid strainer. It shall be suitable for use in clinics, offices, washrooms or patient care area.

22 40 00

orP9180 Lavatory, Wheelchair, 7x20x27 AR CC Wheelchair lavatory. Shall be made of vitreous china and accessible to wheelchair bound

patients and visitors. Unit is equipped with wrist control handles. Used throughout the facility in handicapped access restrooms.

22 40 00

P9050 Toilet, Wall Hung, Siphon Jet AR CC Siphon jet water closet/ toilet. This unit is wall hung with an elongated bowl, top spud flush valve, seat with open front and check hinge, and carrier. Used throughout the health care facility in restrooms.

22 40 00

of 29

veterans canteen service (206) - wbdg · file drawer, and reference slide in left hand pedestal,...

Documents