Superior Performance

& Quality in Blast Cleaning Equipment

Vertical Air Dryers

MANUFACTURED IN CANADABrochure #V1601www.modublast.com

DRY-PRO™ by MOD-U-BLAST® Single Tower, Deliquescent, Air Dryers are a skid mounted system which includes an aftercooler, a coalescing filter and a single tower dryer filled with desiccant tablets. Warm air enters the aftercooler where it is cooled close to the surrounding temperature, water is then condensed out during this cooling process. The saturated air and the liquid water pass through a coalescing filter where any oil contaminants from the compressor are removed and then proceeds to the inlet of the dryer tank. The water and any solid particles present are separated by gravity and fall to the bottom of the dryer tank. The air moves up through the desiccant tablets which absorb the moisture from the air before it flows through the dryer outlet. The tablets dissolve gradually as they absorb the moisture. The dissolved desiccant and water, falls into the bottom of the vessel. The dryer must be drained periodically to remove the accumulated solution. A manual ball valve is installed for this purpose.

Additional Features / Benefits: • Rugged heavy duty construction

• Full load lifting eyes / fork pockets

• Operates in sub zero temperatures

• Low maintenance and operating cost

• Compact design, smaller footprint

• Pressure relief valve (150 PSI)

• CRN Registered Vessel, U Stamped, National Board

Certified, ABSA Certified (Alberta) - 1000, 1200 & 1600 CFM

models only, AS1210 Registered (Australia)

Distributed By:

STANDARD FEATURES

Ordering Information:

Custom Blast Pot / Dryer Skid Combos

EPOXY LINED DELI-VESSEL

FRL PACKAGE

• Filter / Regulator / Lubricator combos.

• Epoxy lined approved deli-vessel with

200 PSI maximum pressure.

DSV250 23” 48” 75” 661 lbs 200 LBS DSV450 26” 48” 78” 811 lbs 300 LBS DSV750 36” 54” 85” 1200 lbs 400 LBS DSV1000 44” 68” 93” 1890 lbs 1000 LBS DSV1200 (special order) 44” 68” 93” 2040 lbs 1200 LBS DSV1600 44” 68” 95” 2170 lbs 1250 LBS

MODEL WIDTH LENGTH HEIGHT WEIGHT DESICCANT REQ’D

SIGHT GLASS

• Ensure peak dryer performance by maintaining sufficient desiccant levels. (Never let desiccant fall below the sight

glass window.)

AFTERCOOLER

• Industrial, air motor driven after cooler.

DESICCANT (50 lb. / bag)Stock # 79000

TEMPERATURE GAUGE

COALESCING FILTER

• Dry-Pro™ high efficiency coalescing filter removes all oil contaminants.

403 - 69 Avenue Edmonton, AlbertaT6P - 0C2

Ph: (780) 466-5085 Fax: (780) 465-7317 Service: (780) 425-5510Email: info@modublast.com