versions effective date - maxquality.info testing protocol update 25 feb 16... · versions...
TRANSCRIPT
VERSIONS EFFECTIVE DATE AMENDMENT (based on LMG corporate technical protocol)
MXTS/QTY/1.5/2012
Based on LMG/CORP/1.1/2012December-12 INITIAL RELEASE
Tensile strength requirement has been removed from all babies / children categories upto 12
years
Tensile strength requirement for Adult Denim category (above 12 years) has been revised.
Formaldehyde requirement of less than 20 ppm has been enforced for all product categories
catering upto 12 years age group
Total lead content of less than 90 ppm has been enforced for all accessible scrapable surface
coatings
For Blended fabrics (including Elastane) the acceptable tolerance limit is revised to +/- 3%
GPT 15 (Underwear) applicable for 100% Cotton content only. For other blends, GPT 16 is
applicable
GPT 18 (Socks) applicable for 95% Cotton or Nylon content only. For other blends, GPT 19 is
applicable
GPT 23 (Swimwear) Color fastness to chlorinated water is under optional test now
Azo Dyes testing is removed from mandatory list
GPT 2,3,4 (Woven garments) Product performance test (Seam slippage, Seam strength, Stretch
& Recovery ) added.
GPT 5,6,7 (Knitted garments) Product performance test (Stretch & Recovery) added.
GPT 8,9,10 (Denim garments) Product performance test (Seam strength) added.
GPT 11 (Additional color garments pkg ) Product performance test added.
GPT 15,16,17 (Underwear) Product performance test (Stretch & Recovery) added.
GPT 24,25 (Swimwear) Product performance test (Stretch & Recovery for Weft knits and
Tension & Elongation for Warp knits) added.
GPT 11 (Additional color garments pkg ) Seam strength & Seam slippage test removed
GPT 17 (Additional color for Underwear) Stretch & Recovery test removed
GPT 25 (Swimwear) Stretch & Recovery for Weft knits and Tension & Elongation for Warp
knits removed
GPT 32 (Additional color garments pkg only for Denim) added in testing protocol
FPT 5, GPT 8, 9, 32 - Tensile strength requirements applicable only for 100% Cotton (Blend
composition are exempted from test of tensile)
Garment odour/ smell test is added in all GPT's
GPT 15, 17, 18, 19, 28, 30, 31 - Added appearance after wash test
MXTS/QTY/1.7/2014
Based on LMG/CORP/1.3/2014October-14
February-16MXTS/QTY/2.0/2016
Based on LMG/CORP/1.4/2016
REVISION RECORD
MXTS/QTY/1.8/2015
Based on LMG/CORP/1.3/2014June-15
MXTS/QTY/1.9/2015
Based on LMG/CORP/1.3/2014August-15
MXTS/QTY/1.6/2013
Based on LMG/CORP/1.2/2013August-13
1 of 57
SR.NO. TESTING PACKAGES
FPT 1 FULL PACKAGE FOR WOVEN FABRIC 65:35 POLY:COTTON & 55:45 POLY:WOOL
FPT 2 WOVEN FABRIC PACKAGE 1ST COLOR ( PACK - A )
FPT 3 WOVEN FABRIC PACKAGE 1ST COLOR ( PACK - B )
FPT 4 WOVEN FABRIC PACKAGE ADDITIONAL COLOR
FPT 5 FULL PACKAGE FOR DENIM FABRIC
FPT 6 KNIT FABRIC PACKAGE 1ST COLOR
FPT 7 KNIT FABRIC PACKAGE ADDITIONAL COLOR
GPT 1 READYMADE APPAREL PACKAGE 65:35 POLY:COTTON & 55:45 POLY:WOOL
GPT 2 WOVEN READYMADE APPARELS PACKAGE ADULT
GPT 3 WOVEN READYMADE APPARELS PACKAGE 8 - 14 YEARS
GPT 4 WOVEN READYMADE APPARELS PACKAGE 0 - 8 YEARS
GPT 5 KNITTED READYMADE APPARELS PACKAGE ADULT
GPT 6 KNITTED READYMADE APPARELS PACKAGE 8 - 14 YEARS
GPT 7 KNITTED READYMADE APPARELS PACKAGE 0 - 8 YEARS
GPT 8 READYMADE DENIM APPARELS PACKAGE ADULT
GPT 9 READYMADE DENIM APPARELS PACKAGE 8 - 14 YEARS
GPT 10 READYMADE DENIM APPARELS PACKAGE 0 - 8 YEARS
GPT 11 ADDITIONAL COLOUR PACK FOR GARMENTS
GPT 12 READYMADE APPARELS PACKAGE (100 % SILK)
GPT 13 FULL PACKAGE FOR BATHROBE, DRESSING GOWN, NEGLIGEE
GPT 14 FULL PACKAGE FOR NECKTIE & SCARF
GPT 15 FULL PACKAGE FOR UNDERWEAR & INTEMATE APPARELS ( 100% Cotton)
GPT 16 FULL PACKAGE FOR UNDERWEAR & INTEMATE APPARELS ( Other than 100% Cotton)
GPT 17 ADDITIONAL COLOUR PACK FOR UNDERWEAR
GPT 18 FULL PACKAGE FOR SOCKS (only men's socks with minimum 95% cotton OR Nylon fibers)
GPT 19 FULL PACKAGE FOR SOCKS (Others)
GPT 20 FULL PACKAGE FOR SWEATER ADULT
GPT 21 FULL PACKAGE FOR SWEATER 8 - 14 YEARS
MAX PROTOCOL LIST
2 of 57
MAX PROTOCOL LISTGPT 22 FULL PACKAGE FOR SWEATER 0 - 8 YEARS
GPT 23 ADDITIONAL COLOUR PACK FOR SWEATER
GPT 24 FULL PACKAGE FOR SWIMWEAR
GPT 25 ADDITIONAL COLOUR PACK FOR SWIMWEAR
GPT 26 FULL PACKAGE FOR PU GARMENT
GPT 27 FULL PACKAGE FOR ARTIFICIAL FAKE FUR
GPT 28 FULL PACKAGE FOR HATS, HAND GLOVES & CAP ETC.
GPT 29 FULL PACKAGE FOR BAG
GPT 30 FULL PACKAGE FOR LINING
GPT 31 FULL PACKAGE FOR OTHER APPARELS OR TEXTILE ACCESSORIES
GPT 32 ADDITIONAL COLOUR PACK FOR GARMENT (ONLY DENIM)
A OPTIONAL TESTS BASED ON CASE BASIS (ON BUYERS DESCRITION)
B GENERAL NOTE & TESTING INSTRUCTION
C LABORATORY RESPONSIBILITIES
D VENDOR RESPONSIBILITIES
E EGYPT TEST REQUIRMENTS
F GENERAL CERTIFICATE OF CONFORMITY
G OPTIONAL TEST BASED ON EGYPT REQUIREMENT
H AZO FREE CERTIFICATE
I WASHING INSTRUCTIONS
J NOTES
3 of 57
Sr.
No.Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
Color fastness To
Washing or水洗色牢度
AATCC 61:2010 / SASO
170:2005 / SASO 2329:2005
Fabric Type Weight (gms)
65% Poly / 35% Cotton
Type A :
Type B :
Type C :
Requirements
FABRIC PACKAGE
FPT 1
FULL PACKAGE FOR WOVEN FABRIC PACKAGE 65% POLYSTER / 35% COTTON AND 55% POLY / 45%WOOL
4 Tensile Strength 拉伸强度
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
ISO 13934 – 2
( 1 inch grab test)
Warp (kg)
3 Mass per unit area 克重 BS EN 12127
• For 55% Polyester / 45% Wool Woven plain fabric
Type A : 168 gsm
Type B : 197 +/- 7.5 gsm
Type C : 224 +/- 7.5 gsm
• For 65% Polyester / 35% Cotton fabric ≥ 85gsm
Others report actual or +/- 5% from claim
2• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)Color fastness To Dry
cleaning干洗色牢度
ISO 105 D01:2010 / SASO
2324:2005
For 55% Polyester /
45%Wool woven plain
fabric
3.50 3.20
4.50 3.80
4.50 3.80
Weft (kg)
40.0 20.0
4 of 57
Sr.
No.Test Description 测试项目 Method / Standard
1 Fiber Composition成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
Color fastness To
Washing or
水洗色牢度 AATCC 61:2010 / SASO
170:2005 / SASO 2329:2005
3
Color fastness to
Rubbing (Except White,
Ivory & Ecru color)
摩擦色牢度(除白色、象牙色&米
白色)
ISO 105 X 12
4 Count 纱支 ISO 7211 - 5
5 Construction 织物密度 ISO 7211 - 2
6 Mass Per Unit Area 克重 ISO 3801
FABRIC PACKAGE
WOVEN FABRIC PACKAGE 1ST COLOR ( PACK - A )
Requirements
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing
blends also)
• Light color – Dry 4, Wet 3-4(min)
• Dark colors- Dry 3-4, wet 3(min)
• For pigment prints / indigo dyed products: Dry -3, Wet
2-3 (min)
FPT 2
• +/- 2 units
• +/- 5% from specified
2• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)Color fastness To Dry
cleaning
ISO 105 D01:2010 / SASO
2324:2005
干洗色牢度
• +/- 2 units
5 of 57
Sr.
No.Test Description 测试项目 Method / Standard
1 Fiber Composition成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
Color fastness To
Washing or
水洗色牢度 AATCC 61:2010 / SASO
170:2005 / SASO 2329:2005
Color fastness To Dry
cleaning
干洗色牢度 ISO 105 D01:2010 /
SASO 2324:2005
3
Color fastness to
Rubbing (Except White,
Ivory & Ecru color)
摩擦色牢度(除白色、象牙色&
米白色)
ISO 105 X 12
4 Count 纱支 ISO 7211 - 5
5 Construction 织物密度 ISO 7211 - 2
6 Mass Per Unit Area 克重 ISO 3801
Primary
Fabric
Weight
(gms)
≤ 90
90-120
120-150
150-180
180-240
240-300
> 300
Primary
Fabric
Type
Primary
fabric
Weight oz/
yd2 & gms
≤ 90
90-120
120-150
150-180
180-240
240-300
> 300
≤ 80
80-140
140-200
200-230
230-250
250-270
> 270
FABRIC PACKAGE
1000
1200
All pile
fabric
(Corduroy,
Velveteen,
Velvet &
Terry),
Flannel &
Seersucker
550
25 18
32 22
600
550
400
1000
1200
1300 1100
1350 1200
1100
9 Tear Strength 撕裂强度 ISO 13937-part 1
Warp (gms) Weft (gms)
900 800
1000 900
600
400
1500 1150
680 590
770 680
Other
wovens
(except
55:45
polyester :
wool &
65:35
polyester :
800
1000
800
• +/- 2 units
• +/- 2 units
• +/- 5% from specified
7
*Appearance after Wash
( After 3 wash or 1 dry
cleaning)
洗后外观(3次洗
后或1次干洗)
AATCC 135 / 150 OR
Commercial Dry cleaning• Satisfactory (Must follow the general requirements
8 Tensile Strength 拉伸强度
ISO 13934 – 2
( 1 inch grab test)
Warp (kg) Weft (kg)
(Except for
55:45
polyester :
wool &
65:35
polyester :
cotton
blends)
7 4.5
12 8
16 9
18 11
20
2• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)
• Light color – Dry 4, Wet 3-4(min)
• Dark colors- Dry 3-4, wet 3(min)
• For pigment prints / indigo dyed products: Dry -3, Wet
2-3 (min)
FPT 3
WOVEN FABRIC PACKAGE 1ST COLOR ( PACK - B )
Requirements
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing
blends also)
14
6 of 57
FABRIC PACKAGE
FPT 3
Fabric
Weight in
gms
< 80
80-140
140-200
200-250
80-140
140-200
200-230
230-270
> 270
≤ 140
> 140
*Applicable for printed colors
7&
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
13
12
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
17
9
7 9
10 13
Seam strength
(Kg)
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having
65 % Viscose Content or more)
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash
appearances.
16 21
Skirts &
Dresses :
4 6
Bottoms
(Pyjamas/
Lining /
Trousers
/Formal
skirts)
9ISO 13936-1
Seam slippage
(kg) (For
Seam
7
10
8 11
7
4 6
8 10
Tops &
Blouses
10Seam slippage & Seam
strength接缝滑移&强度
7 of 57
Sr. No. Test Description 测试项目 Method / Standard
Color fastness To
Washing or水洗色牢度
AATCC 61:2010 / SASO
170:2005 / SASO 2329:2005
2
Color fastness to
Rubbing (Except White,
Ivory & Ecru color)
摩擦色牢度(除白色、象牙&米白色)
ISO 105 X 12
FPT 4
FABRIC PACKAGE
干洗色牢度
• Light color – Dry 4, Wet 3-4(min)
• Dark colors- Dry 3-4, wet 3(min)
• For pigment prints / indigo dyed products: Dry -3, Wet 2-3 (min)
WOVEN FABRIC PACKAGE ADDITIONAL COLOR
1• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)Color fastness To Dry
cleaning
ISO 105 D01:2010 / SASO
2324:2005
Requirements
8 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
Color Fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean干洗色牢度 AATCC 132 : 2009
3 Mass Per Unit Area 克重 ISO 3801
Applicability Fabric weight
Only for 100 %
Cotton
271 gm/sqm.
(8 oz/sq yd)
or Less
36 18
FPT 5
2
• Change in color – 4 ( min.)
• Color Staining – 4 ( min.)
4
Tensile Strength
(Not applicable for
children below 14
yrs)
拉伸强度 ASTM D 5034:2009
Warp : kg (min) Weft : kg (min)
FULL PACKAGE FOR DENIM FABRIC
• Non indigo dyed : Color change - 3.5 (min), Color staining : 3 (min)
• Indigo dyed & sulfur black colors. Color
change - 2 min, Color staining - 2 min
FABRIC PACKAGE
± 5 % from specified
Requirements
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
9 of 57
Sr.
No.Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
Color fastness To
Washing or水洗色牢度
AATCC 61:2010 /
SASO 170:2005 /
SASO 2329:2005
3
Color fastness to
Rubbing (Except
White, Ivory & Ecru
color)
摩擦色牢度(除白色、象牙色&
米白色)
ISO 105 X 12
5 Mass Per Unit Area 克重 BS EN 12127
*Applicable for printed colors.
6
&
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
FABRIC PACKAGE
KNIT FABRIC PACKAGE 1st COLOR
Requirements
± 5 % from specified
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane
containing blends also)
2
胀破强度
• Light color – Dry 4, Wet 3-4(min)
• Dark colors- Dry 3-4, wet 3(min)
• For pigment prints / indigo dyed products: Dry -
3, Wet 2-3 (min)
4
Color fastness To
Dry cleaning
FPT 6
6
*Appearance after
Wash ( After 3 wash
or 1 dry cleaning)
AATCC 135 / 150 OR
Commercial Dry
cleaning
• Satisfactory (Must follow the general
requirements
洗后外观(3次
洗后或1次干洗
)
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding,
unsatisfactory after wash appearances.
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant
Blends having 65 % Viscose Content or more)
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
Bursting StrengthISO 13938 - 1
(d = 30.5 mm)
• For ≤ 170 gsm : 30 lb/sq inch
• For ˃ 170 gsm: 40 lb / sq inch
• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)
干洗色牢度ISO 105 D01:2010 /
SASO 2324:2005
10 of 57
Sr. No. Test Description 测试项目 Method / Standard
Color fastness To
Washing or
水洗色牢度 AATCC 61:2010 / SASO
170:2005 / SASO
2329:2005
2
Color fastness to
Rubbing (Except
White, Ivory & Ecru
color)
摩擦色牢度(除白色、象牙色&米白
色)
ISO 105 X 12
• Light color – Dry 4, Wet 3-4(min)
• Dark colors- Dry 3-4, wet 3(min)
• For pigment prints / indigo dyed products: Dry -3, Wet 2-3 (min)
1• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)Color fastness To
Dry cleaning
ISO 105 D01:2010 /
SASO 2324:2005
FPT 7
FABRIC PACKAGE
Requirements
干洗色牢度
KNIT FABRIC PACKAGE ADDITIONAL COLOR
11 of 57
Sr. No. Test Description 测试项目 Method / Standard
2 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
3
Labelling /
Marking(fiber
composition &care
label)
标签(成分标和洗护标)
SASO 1173/1174
Color Fastness to
Washing OR
水洗色牢度 AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean
干洗色牢度 ISO 105 D01:2010
SASO 2324:2005
Fabric Type Weight (gms)
65% Poly / 35% Cotton
Type A :
Type B :
Type C :
Upto 150 gsm
150-200 gsm
200-250 gsm
Above 250 gsm
Upto 150 gsm
150-200 gsm
200-250 gsm
Above 250 gsm
6 pH content PH值 ISO 3071
7
Formaldehyde
content ( For 65:35
Poly Cotton blend
only
甲醛(
仅用于65:35
涤棉混纺)
ISO 14184-1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗后外观 AATCC 135 / 150
Appearance after
Dry clean干洗后外观 Commercial Dry clean
2Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
GARMENT PACKAGE
40
10
3.84.5
Others report actual or +/- 5% from claim
READYMADE APPAREL PACKAGE 65% POLYSTER / 35% COTTON AND 55% POLY / 45% WOOL
5
3.2
拉伸强度
25
14
Weft (kg)
For 55% Polyester /
45%Wool woven plain
fabric
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
25
• For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
• For 55:45 polyester : wool blend:5.5 – 8.5
• Max. 300 ppm
16
20
9
Tensile StrengthISO 13934 – 2
( 1 inch grab test)
12
• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor
which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant
odour found". 1 per color way
Requirements
13
3.8
Other : (Normal woven
fabric)
3.5
18
克重
23
Requirements
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)
GPT 1
1
4
• For 55% Polyester / 45% Wool Woven plain fabric
Type A : 168 gsm
Type B : 197 +/- 7.5 gsm
Type C : 224 +/- 7.5 gsm
• Change in color – 4 ( min.)
• Color Staining – 4 ( min.)
BS EN 12127
1&
• Satisfactory (Must comply general requirement)
• Satisfactory (Must comply general requirement)
• For 65% Polyester / 35% Cotton fabric ≥ 85gsm
Warp (kg)
18
Mass per unit area
4.5
• As required
All pile, corduroy, terry,
velvet
15
16
20
20
25
12 of 57
Sr.
No.Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
Color Fastness to
Washing OR
水洗色牢度 AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean
干洗色牢度 ISO 105 D01:2010
SASO 2324:2005
4 pH content PH值 ISO 3071
PRODUCT PERFORMANCE TESTING
Sr.
No.Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗后外观 AATCC 135 / 150
Appearance after
Dry clean干洗后外观 Commercial Dry clean
Fabric
Weight in
gms
< 80
80-140
140-200
200-250
80-140
140-200
200-230
230-270
> 270
≤ 140
> 140
3For Wovens
Stretch & Recovery
ASTM D 3107
(Modified)
Stretch Direction Only
Number of
Readings
(Total Repetitions)
3 per Color
(Maximum 2
Colors)
4Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
GARMENT PACKAGE
• Satisfactory (Must comply general requirement)
WOVEN READYMADE APPARELS PACKAGE ( ADULT )
Requirements
3
• Change in Color: 4 (min.)
• Color staining: 4 ( min.)
• Change in color – 4 ( min.)
• Color Staining – 4 ( min.)
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
GPT 2
1&
• Satisfactory (Must comply general requirement)
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
• As required
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
• For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
• For 55:45 polyester : wool blend:5.5 – 8.5
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
12.0
6.0
7.0 9.0
8.0
Seam strength (Kg)
4.0
• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor
which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant
odour found". 1 per color way
Seam slippage (kg) (For
Seam Opening 6.00 mm)
9.0
10.0
* No Elastane Content: Do not Test.
Elastane Content - 1-5% :
Measure Time Dependent Growth and Recovery using 30 minutes.
Report both Growth and Recovery.
Pass or fail based on growth. Growth: Max. 7% allowed
Elastane Content - Above 5%:
Measure Time Dependent Growth & Recovery using 30 minutes. Report
both Growth & Recovery.
Pass or fail based on growth. Growth: Max. 5%
* If sample as received Fails:
Report original results – Data Only
After one laundering per care instructions –
Repeat Testing and Pass / Fail based on Washed fabric
Pass / Fail based on Each Repetition
Requirements
17.0
4.0 6.0
16.0 21.0
7.0 9.0
8.0 11.0
10.0 13.0
2
For Wovens Seam
slippage & Seam
strength
接缝滑移&强度ISO 13936-1
ISO 13935-2
Tops & Blouses
Bottoms (Pyjamas/
Lining / Trousers
/Formal skirts)
Skirts & Dresses :
Only for loose 7.0
10.0 13.0
13 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
Color Fastness to
Washing OR
水洗色牢度 AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean
干洗色牢度
ISO 105 D01:2010
SASO 2324:2005
4 pH content PH值 ISO 3071
5Formaldehyde
content甲醛 ISO 14184-1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗后外观 AATCC 135 / 150
Appearance after
Dry clean干洗后外观 Commercial Dry clean
Fabric Weight in
gms
< 80
80-140
140-200
200-250
80-140
140-200
200-230
230-270
> 270
≤ 140
> 140
3For Wovens
Stretch & Recovery
ASTM D 3107
(Modified)
Stretch Direction Only
Number of Readings
(Total Repetitions)
3 per Color
(Maximum 2 Colors)
4Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
• Babies & Children ( < 14 years ) : < 20 ppm
GARMENT PACKAGE
• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)
• Satisfactory (Must comply general requirement)
• For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
• For 55:45 polyester : wool blend:5.5 – 8.5
• Change in color – 4 ( min.)
• Color Staining – 4 ( min.)
• Satisfactory (Must comply general requirement)
Requirements
GPT 3
Tops & Blouses
4.0 6.0
9.0
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
3
1 &
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
Requirements
2
For Wovens
Seam slippage &
Seam strength
接缝滑移&强度ISO 13936-1 ISO
13935-2
Seam slippage (kg)
(For Seam Opening
• As required
• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor
which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant
odour found". 1 per color way
Seam strength (Kg)
8.0 11.0
7.0
WOVEN READYMADE APPARELS PACKAGE ( 8 - 14 YEARS AGE GROUP)
10.0
10.0 13.0
8.0
* No Elastane Content: Do not Test.
Elastane Content - 1-5% :
Measure Time Dependent Growth and Recovery using 30 minutes.
Report both Growth and Recovery.
Pass or fail based on growth. Growth: Max. 7% allowed
Elastane Content - Above 5%:
Measure Time Dependent Growth & Recovery using 30 minutes.
Report both Growth & Recovery.
Pass or fail based on growth. Growth: Max. 5%
* If sample as received Fails:
Report original results – Data Only
After one laundering per care instructions –
Repeat Testing and Pass / Fail based on Washed fabric
Pass / Fail based on Each Repetition
21.0
Skirts & Dresses : Only
for loose fitted garment
4.0 6.0
16.0
7.0 9.0
Bottoms (Pyjamas/
Lining / Trousers
/Formal skirts)
7.0
10.0 13.0
12.0 17.0
9.0
14 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
Color Fastness to
Washing OR
水洗色牢度 AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean
干洗色牢度 ISO 105 D01:2010
SASO 2324:2005
4 pH content PH值 ISO 3071
5Formaldehyde
content 甲醛 ISO 14184-1
6
Color fastness to
Saliva(Except White,
Ivory & Ecru color)
耐唾液色牢度 DIN 53160 - 1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗后外观 AATCC 135 / 150
Appearance after
Dry clean干洗后外观 Commercial Dry clean
Fabric Weight in
gms
< 80
80-140
140-200
200-250
80-140
140-200
200-230
230-270
> 270
≤ 140
> 140
3For Wovens
Stretch & Recovery
ASTM D 3107 (Modified)
Stretch Direction Only
Number of Readings
(Total Repetitions)
3 per Color
(Maximum 2 Colors)
4Fabric / Garment
odourVisual Check
• Color staining: 4-5 (min).
• For 0-3 years: 4.0 – 7.5
• For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
• For 55:45 polyester : wool blend:5.5 – 8.5
• Satisfactory (Must comply general requirement)
• Satisfactory (Must comply general requirement)
9.0
10.0 13.0
13.0
4.0 6.0
7.0 9.0
8.0 10.0
GARMENT PACKAGE
WOVEN READYMADE APPARELS PACKAGE ( 0--8 YEARS AGE GROUP)
1 &
Requirements
3
• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
GPT 4
• Babies & Children ( < 14 years ) : < 20 ppm
• Change in color – 4 ( min.)
• Color Staining – 4 ( min.)
Requirements
• As required
ISO 13936-1 ISO
13935-2
Seam slippage (kg)
(For Seam Opening Seam strength (Kg)
Tops & Blouses
• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor
which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant
odour found". 1 per color way
2
For Wovens Seam
slippage & Seam
strength
接缝滑移&强度
* No Elastane Content: Do not Test.
Elastane Content - 1-5% :
Measure Time Dependent Growth and Recovery using 30 minutes.
Report both Growth and Recovery.
Pass or fail based on growth. Growth: Max. 7% allowed
Elastane Content - Above 5%:
Measure Time Dependent Growth & Recovery using 30 minutes.
Report both Growth & Recovery.
Pass or fail based on growth. Growth: Max. 5%
* If sample as received Fails:
Report original results – Data Only
After one laundering per care instructions –
Repeat Testing and Pass / Fail based on Washed fabric
Pass / Fail based on Each Repetition
12.0 17.0
16.0 21.0
Skirts & Dresses : Only
for loose fitted garment
4.0 6.0
7.0
Bottoms (Pyjamas/
Lining / Trousers
/Formal skirts)
7.0 9.0
8.0 11.0
10.0
15 of 57
GARMENT PACKAGE
GPT 4
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
16 of 57
Sr.
No.Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
Color Fastness to
Washing OR
水洗色牢度 AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean
干洗色牢度 ISO 105 D01:2010
SASO 2324:2005
4 pH content PH值 ISO 3071
PRODUCT PERFORMANCE TESTING
Sr.
No.Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗后外观 AATCC 135 / 150
Appearance after
Dry clean干洗后外观 Commercial Dry clean
2Stretch & Recovery
(WEFT KNITS)
ASTM D2594
(Modified)
Number of Readings
(Total Repetitions) 3
per Color
(Maximum 2 Colors)
3Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
GARMENT PACKAGE
• For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
KNITTED READYMADE APPARELS PACKAGE ( ADULT )
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
• Satisfactory (Must comply general requirement)
• Change in color – 4 ( min.)
• Color Staining – 4 ( min.)
Requirements
GPT 5
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
1 &
• As required
• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)
• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor
which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant
odour found". 1 per color way
* No Elastane Content: Do not Test.
* Tested in Course Direction Only
Elastane Content: Less than 10%:
After 2 hour extension, Measure (C) after 60 minutes. Report
both growth and recovery.
Pass or fail based on growth. Growth: Max. 5%
Elastane Content Equal to or greater than 10%:
After 2 hour extension, Measure (B) after 60 seconds. Report
both growth and recovery.
Pass or fail based on recovery. Recovery: Minimum 85%
* If sample as received Fails:
Report original results - Data Only
After one laundering per care instructions -
Repeat Testing and Pass / Fail based on washed fabric
Pass / Fail based on Each Repetition
3
Requirements
• Satisfactory (Must comply general requirement)
17 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
Color Fastness to
Washing OR
水洗色牢度 AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean
干洗色牢度 ISO 105 D01:2010
SASO 2324:2005
4 pH content PH值 ISO 3071
5Formaldehyde
content 甲醛 ISO 14184-1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗外观 AATCC 135 / 150
Appearance after
Dry clean干洗外观 Commercial Dry clean
2Stretch & Recovery
(WEFT KNITS)
ASTM D2594
(Modified)
Number of Readings
(Total Repetitions) 3
per Color
(Maximum 2 Colors)
3Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
GARMENT PACKAGE
• Satisfactory (Must comply general requirement)
• Babies & Children ( < 14 years ) : < 20 ppm
• As required
* No Elastane Content: Do not Test.
* Tested in Course Direction Only
Elastane Content: Less than 10%:
After 2 hour extension, Measure (C) after 60 minutes. Report both
growth and recovery.
Pass or fail based on growth. Growth: Max. 5%
Elastane Content Equal to or greater than 10%:
After 2 hour extension, Measure (B) after 60 seconds. Report both
growth and recovery.
Pass or fail based on recovery. Recovery: Minimum 85%
* If sample as received Fails:
Report original results - Data Only
After one laundering per care instructions -
Repeat Testing and Pass / Fail based on washed fabric
Pass / Fail based on Each Repetition
• For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)
• Change in color – 4 ( min.)
• Color Staining – 4 ( min.)
Requirements
GPT 6
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
KNITTED READYMADE APPARELS PACKAGE ( 8 - 14 YEARS AGE GROUP)
• Satisfactory (Must comply general requirement)
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
1 &
3
Requirements
• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor
which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant
odour found". 1 per color way
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
18 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
Color Fastness to
Washing OR
水洗色牢度 AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean
干洗色牢度 ISO 105 D01:2010
SASO 2324:2005
4 pH content PH值 ISO 3071
5Formaldehyde
content 甲醛 ISO 14184-1
6
Color fastness to
Saliva(Except White,
Ivory & Ecru color)
耐唾液色牢度 DIN 53160 - 1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗后外观 AATCC 135 / 150
Appearance after
Dry clean干洗后外观 Commercial Dry clean
2Stretch & Recovery
(WEFT KNITS)
ASTM D2594
(Modified)
Number of Readings
(Total Repetitions) 3
per Color
(Maximum 2 Colors)
3Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
GARMENT PACKAGE
KNITTED READYMADE APPARELS PACKAGE ( 0--8 YEARS AGE GROUP)
Requirements
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
GPT 7
1 &
• Satisfactory (Must comply general requirement)
• Satisfactory (Must comply general requirement)
3
• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)
• Change in color – 4 ( min.)
• Color Staining – 4 ( min.)
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
• Color staining: 4-5 (min).
• For 0-3 years: 4.0 – 7.5
• For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
• Babies & Children ( < 14 years ) : < 20 ppm
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
Requirements
* No Elastane Content: Do not Test.
* Tested in Course Direction Only
Elastane Content: Less than 10%:
After 2 hour extension, Measure (C) after 60 minutes. Report both
growth and recovery.
Pass or fail based on growth. Growth: Max. 5%
Elastane Content Equal to or greater than 10%:
After 2 hour extension, Measure (B) after 60 seconds. Report both
growth and recovery.
Pass or fail based on recovery. Recovery: Minimum 85%
* If sample as received Fails:
Report original results - Data Only
After one laundering per care instructions -
Repeat Testing and Pass / Fail based on washed fabric
Pass / Fail based on Each Repetition
• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor
which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant
odour found". 1 per color way
• As required
19 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
Color Fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to Dry
clean干洗色牢度 AATCC 132 : 2009
4 pH content PH值 ISO 3071
5 Mass Per Unit Area 克重 ISO 3801
Applicability Fabric weight
Only for 100 % Cotton
271 gm/sqm. (8
oz/sq yd) or
Less
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗外观 AATCC 135 / 150
Appearance after Dry
clean干洗外观 Commercial Dry clean
3Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
5.01 - 8 oz.
• After 24 hours of open package conditioning. Garments shall not have any unpleasant
odor which would prevent customer from purchasing. Report as Unsatisfactory if any
unpleasant odour found". 1 per color way
Upto 5 oz.For Denims Seam
Strength
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
45 lbs.
**** Garments made by Indigo dyed fibers will be considered in Denim category & these will be tested at 40 deg else all will lie in non-indigo category
25 lbs.
30 lbs.
Weight (oz. / sq. yd.)
接缝滑移 ASTM D 1683 For all type of fabrics
Above 8 oz.
Seam Strength : lbs.
2
GARMENT PACKAGE
• Color Change: 4 min.
• Color Staining: 4min
• As required
3
Tensile Strength
• Satisfactory (Must comply general requirement)
ASTM D 5034:2009
18
Weft : kg (min)Warp : kg (min)
6 拉伸强度
Requirements
36
• Satisfactory (Must comply general requirement)
1 &
Requirements
± 5 % from specified
• Non indigo dyed : Color change - 3.5 (min), Color staining : 3 (min) •
Indigo dyed & sulfur black colors. Color change - 2 min, Color staining - 2 min
• For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
GPT 8
READYMADE DENIM APPARELS PACKAGE ( ADULT )
20 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
Color Fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean干洗色牢度 AATCC 132 : 2009
4 pH content PH值 ISO 3071
5Formaldehyde
content 甲醛 ISO 14184-1
6 Mass Per Unit Area 克重 ISO 3801
Applicability Fabric weight
Only for 100 %
Cotton
271 gm/sqm.
(8 oz/sq yd)
or Less
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗外观 AATCC 135 / 150
Appearance after
Dry clean干洗外观 Commercial Dry clean
3Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
• Satisfactory (Must comply general requirement)
± 5 % from specified
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
• Satisfactory (Must comply general requirement)
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
**** Garments made by Indigo dyed fibers will be considered in Denim category & these will be tested at 40 deg else all will lie in non-indigo category
For all type of
fabrics
Weight (oz. / sq. yd.) Seam Strength : lbs.
ASTM D 5034:2009
Warp : kg (min) Weft : kg (min)
36 18
• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor
which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant
odour found". 1 per color way
Requirements
2For Denims
Seam Strength
45 lbs.Above 8 oz.
1 &
接缝滑移 ASTM D 1683Upto 5 oz. 25 lbs.
5.01 - 8 oz. 30 lbs.
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
• As required
Requirements
• Non indigo dyed : Color change - 3.5 (min), Color staining : 3 (min)
• Indigo dyed & sulfur black colors. Color change - 2 min, Color staining - 2 min
7 Tensile Strength 拉伸强度
• Babies & Children ( < 14 years ) : < 20 ppm
• For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
GARMENT PACKAGE
READYMADE DENIM APPARELS PACKAGE ( 8 - 14 YEARS AGE GROUP)
3
GPT 9
• Change in color – 4 ( min.)
• Color Staining – 4 ( min.)
21 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
Color Fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to Dry
clean干洗色牢度 AATCC 132 : 2009
4 pH content PH值 ISO 3071
5 Formaldehyde content 甲醛 ISO 14184-1
6
Color fastness to
Saliva(Except White,
Ivory & Ecru color)
耐唾液色牢度 DIN 53160 - 1
7 Mass Per Unit Area 克重 ISO 3801
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after Wash
OR水洗外观 AATCC 135 / 150
Appearance after Dry
clean干洗外观 Commercial Dry clean
3 Fabric / Garment odour Visual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
GARMENT PACKAGE
READYMADE DENIM APPARELS PACKAGE ( 0 - 8 YEARS AGE GROUP)
1 &
Requirements
• Change in color – 4 ( min.)
• Color Staining – 4 ( min.)
• Satisfactory (Must comply general requirement)
• Satisfactory (Must comply general requirement)
GPT 10
Requirements
± 5 % from specified
**** Garments made by Indigo dyed fibers will be considered in Denim category & these will be tested at 40 deg else all will lie in non-indigo category
• Non indigo dyed : Color change - 3.5 (min), Color staining : 3 (min)
• Indigo dyed & sulfur black colors. Color change - 2 min, Color staining - 2 min
3
• For 0-3 years: 4.0 – 7.5
• For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
2For Denims Seam
Strength 接缝滑移 ASTM D 1683
• After 24 hours of open package conditioning. Garments shall not have any
unpleasant odor which would prevent customer from purchasing. Report as
Unsatisfactory if any unpleasant odour found". 1 per color way
For all type of fabrics
• Babies & Children ( < 14 years ) : < 20 ppm
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
• As required
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
• Color staining: 4-5 (min).
Above 8 oz. 45 lbs.
Weight (oz. / sq. yd.) Seam Strength : lbs.
Upto 5 oz. 25 lbs.
5.01 - 8 oz. 30 lbs.
22 of 57
Sr. No. Test Description 测试项目 Method / Standard
Color Fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean干洗色牢度
ISO 105 D01:2010
SASO 2324:2005
2 pH content PH值 ISO 3071
1Formaldehyde
content甲醛 ISO 14184-1
2
Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
Ivory & Ecru color)
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗外观 AATCC 135 / 150
Appearance after
Dry clean干洗外观 Commercial Dry clean
2Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
Additional Mandatory Requirements (for Children category upto 14 years)
• Babies & Children ( < 14 years ) : < 20 ppm
• Color staining: 4-5 min.
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
• After 24 hours of open package conditioning. Garments shall not have any unpleasant
odor which would prevent customer from purchasing. Report as Unsatisfactory if any
unpleasant odour found". 1 per color way
• Satisfactory (Must comply general requirement)
ADDITIONAL COLOUR PACK FOR GARMENTS (Non Denim)
Requirements
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
GARMENT PACKAGE
1 &
• Satisfactory (Must comply general requirement)
• For 0-3 years: 4.0 – 7.5 •
For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
• For 55:45 polyester : wool blend:5.5 – 8.5
GPT 11
1
• Change in color – 4 (min)
• Color Staining – 4 (min)
For Denim
• Non indigo dyed : Color change - 3.5 (min), Color staining : 3 (min)
• Indigo dyed & sulfur black colors. Color change - 2 min, Color staining - 2 min
• Color change: 4 (min.)
• Color Staining: 4 (min.)
Requirements
23 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
Color Fastness to
Washing OR水洗外观
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean干洗外观 AATCC 132:2009
4 Tensile Strength 拉伸强度 ISO 13934 - 2
1 pH content PH值 ISO 3071
2Formaldehyde
content甲醛 ISO 14184-1
3
Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
Ivory & Ecru color)
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗外观 AATCC 135 / 150
Appearance after
Dry clean干洗外观 Commercial Dry clean
2Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
GARMENT PACKAGE
Requirements
READYMADE APPARELS PACKAGE FOR 100% SILK
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
• As required
GPT 12
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
Requirements
1 &
• Satisfactory (Must comply general requirement)
• Satisfactory (Must comply general requirement)
• After 24 hours of open package conditioning. Garments shall not have any unpleasant
odor which would prevent customer from purchasing. Report as Unsatisfactory if any
unpleasant odour found". 1 per color way
• Color change: 4 (min.)
• Color Staining: 4 (min.)
• Change in color – 4 (min)
• Color Staining – 3 (min)
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
• Warp – 20 kg (Min)
• Weft – 15 kg (Min)
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
Additional Mandatory Requirements (for Children category upto 14 years)
• For 0-3 years: 4.0 – 7.5
• Direct skin contact: 4.0 – 7.5
• Non direct skin contact: 4.0 - 9.0
• Color staining: 4-5 min.
• Babies & Children ( < 14 years ) : < 20 ppm
3
24 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
Color Fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean干洗色牢度 AATCC 132:2009
4Tensile Strength (
for Woven) 拉伸强度(梭织) ASTM D 5034
1 pH content PH值 ISO 3071
2Formaldehyde
content甲醛 ISO 14184-1
3
Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
Ivory & Ecru color)
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗外观 AATCC 135 / 150
Appearance after
Dry clean干洗外观 Commercial Dry clean
2Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
GARMENT PACKAGE
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
• As required
ASTM D3786:2009
(Hydraulic)
FULL PACKAGE FOR BATHROBE , DRESSING GOWN , NEGLIGEE
GPT 13
• Sheer fabrics: 30 lbs. / sq. inch
• Non sheer fabrics: 50 lbs. / sq. inch
Requirements
• Color staining: 4-5 min.
1 &
• Babies & Children ( < 14 years ) : < 20 ppm
• Satisfactory (Must comply general requirement)
• After 24 hours of open package conditioning. Garments shall not have any unpleasant
odor which would prevent customer from purchasing. Report as Unsatisfactory if any
unpleasant odour found". 1 per color way
• For 0-3 years: 4.0 – 7.5
• Direct skin contact: 4.0 – 7.5
• Non direct skin contact: 4.0 - 9.0
Additional Mandatory Requirements (for Children category upto 14 years)
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
• Fabric weight: For ≤ 170 gms : 30 lb./sq. inch5
Bursting Strength (
for Knits)胀破强度(针织)
3
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
• Color change: 4 (min.)
• Color Staining: 4 (min.)
• Change in color – 4 (min)
• Color Staining – 3 (min)
• Satisfactory (Must comply general requirement)
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
• Fabric weight: For ≥ 170 gms: 40 lb. / sq. inch
• Sheer fabrics: 7 kg min.
• Non sheer fabrics: 9 kg min.
Requirements
25 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
Color Fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean干洗色牢度 AATCC 132:2009
4Tensile strength (For
Woven)拉伸强度(梭织) ASTM D 5034
1 pH content PH值 ISO 3071
2Formaldehyde
content甲醛 ISO 14184-1
3
Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
Ivory & Ecru color)
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗外观 AATCC 135 / 150
Appearance after
Dry clean干洗外观 Commercial Dry clean
2Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
GPT 14
• Change in color – 4 (min)
• Color Staining – 3 (min)
3• Color change: 4 (min.)
• Color Staining: 4 (min.)
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
• Babies & Children ( < 14 years ) : < 20 ppm
• 9 kg min.
1 &
• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor
which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant
odour found". 1 per color way
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
• Satisfactory (Must comply general requirement)
• Satisfactory (Must comply general requirement)
FULL PACKAGE FOR NECKTIE AND SCARF
• Color staining: 4-5 min.
• For 0-3 years: 4.0 – 7.5
• Direct skin contact: 4.0 – 7.5
• Non direct skin contact: 4.0 - 9.0
Requirements
Requirements
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
• As required
Additional Mandatory Requirements (for Children category upto 14 years)
26 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
3Color Fastness to
Washing 水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
4 pH content PH值 ISO 3071
5Formaldehyde
content甲醛 ISO 14184-1
Plain Interlock Plain Interlock
Thick 106-118 98-106 146-156 102-110
Medium 126-134 114-138 172-180 118-164
Fine 142-154 152-168 196-212 180-196
Others
1
Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
Ivory & Ecru color)
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
1 &Appearance after
Wash OR水洗外观 AATCC 135 / 150
2Stretch & Recovery
(WEFT KNITS)
ASTM D2594
(Modified)
Number of Readings
(Total Repetitions)
3 per Color
(Maximum 2
Colors)
3Fabric / Garment
odourVisual Check
Requirements
* No Elastane Content: Do not Test.
* Tested in Course Direction Only
Elastane Content: Less than 10%:
After 2 hour extension, Measure (C) after 60 minutes. Report both growth
and recovery.
Pass or fail based on growth. Growth: Max. 5%
Elastane Content Equal to or greater than 10%:
After 2 hour extension, Measure (B) after 60 seconds. Report both growth
and recovery.
Pass or fail based on recovery. Recovery: Minimum 85%
* If sample as received Fails:
Report original results - Data Only
After one laundering per care instructions -
Repeat Testing and Pass / Fail based on washed fabric
Pass / Fail based on Each Repetition
• Satisfactory (Must comply general requirement)
• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor
which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant
odour found". 1 per color way
GPT 15
6
• Babies & Children ( < 14 years ) : < 20 ppm •
Others : < 75 ppm
Class of
fabric
织物密度
Requirements
For Cotton Knitted
underwear
• Color staining: 4-5 min.
Additional Mandatory Requirements (for Babies 0 - 3 years)
Report actual or +/- 5% from claims
• For 100 % Cotton : 6.0 – 8.0 • Other
than 100 % Cotton : 4.0-7.5
FULL PACKAGE FOR UNDERWEAR (ONLY 100% COTTON)
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
Determination of
number of Courses
& Wales
• As required
BS 5441 SASO
1170:1997
Number of Courses in 10 cmNumber of Wales in 10
cm
• Color change: 4 (min.)
• Color Staining: 4 (min.)
27 of 57
GPT 15
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
28 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
3Color Fastness to
Washing 水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
4 pH content PH值 ISO 3071
1Formaldehyde
content甲醛 ISO 14184-1
2
Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
Ivory & Ecru color)
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
1 &Appearance after
Wash OR水洗外观 AATCC 135 / 150
2Stretch & Recovery
(WEFT KNITS)
ASTM D2594
(Modified)
Number of Readings
(Total Repetitions)
3 per Color
(Maximum 2
Colors)
3Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
Requirements
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
Requirements
GPT 16
• As required
• Color change: 4 (min.)
• Color Staining: 4 (min.)
• For 100 % Cotton : 6.0 – 8.0
• Other than 100 % Cotton : 4.0-7.5
FULL PACKAGE FOR UNDERWEAR (Other than 100% Cotton)
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
Additional Mandatory Requirements (for Children category upto 14 years)
• Color staining: 4-5 min.
• Satisfactory (Must comply general requirement)
• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor
which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant
odour found". 1 per color way
* No Elastane Content: Do not Test.
* Tested in Course Direction Only
Elastane Content: Less than 10%:
After 2 hour extension, Measure (C) after 60 minutes. Report both growth
and recovery.
Pass or fail based on growth. Growth: Max. 5%
Elastane Content Equal to or greater than 10%:
After 2 hour extension, Measure (B) after 60 seconds. Report both growth
and recovery.
Pass or fail based on recovery. Recovery: Minimum 85%
* If sample as received Fails:
Report original results - Data Only
After one laundering per care instructions -
Repeat Testing and Pass / Fail based on washed fabric
Pass / Fail based on Each Repetition
• Babies & Children ( < 14 years ) : < 20 ppm
• Others : < 75 ppm
29 of 57
Sr. No. Test Description 测试项目 Method / Standard
1Color Fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
2 pH content PH值 ISO 3071
3Formaldehyde
content甲醛 ISO 14184-1
1
Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
Ivory & Ecru color)
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
1 &Appearance after
Wash OR水洗外观 AATCC 135 / 150
2Stretch & Recovery
(WEFT KNITS)
ASTM D2594
(Modified)
Number of Readings
(Total Repetitions)
3 per Color
(Maximum 2 Colors)
3Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
Requirements
• Satisfactory (Must comply general requirement)
* No Elastane Content: Do not Test.
* Tested in Course Direction Only
Elastane Content: Less than 10%:
After 2 hour extension, Measure (C) after 60 minutes. Report both
growth and recovery.
Pass or fail based on growth. Growth: Max. 5%
Elastane Content Equal to or greater than 10%:
After 2 hour extension, Measure (B) after 60 seconds. Report both
growth and recovery.
Pass or fail based on recovery. Recovery: Minimum 85%
* If sample as received Fails:
Report original results - Data Only
After one laundering per care instructions -
Repeat Testing and Pass / Fail based on washed fabric
Pass / Fail based on Each Repetition
• After 24 hours of open package conditioning. Garments shall not have any unpleasant
odor which would prevent customer from purchasing. Report as Unsatisfactory if any
unpleasant odour found". 1 per color way
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
ADDITIONAL COLOUR PACK FOR UNDERWEAR
Requirements
• Color change: 4 (min.)
• Color Staining: 4 (min.)
• Babies & Children ( < 14 years ) : < 20 ppm
• Others : < 75 ppm
• Color staining: 4-5 min.
• For 100 % Cotton : 6.0 – 8.0
• Other than 100 % Cotton : 4.0-7.5
Additional Mandatory Requirements (for Children category upto 3 years)
GPT 17
30 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 2636:2006
Type Size
9
9.5
10
10.5
11
11.5
12
Nylon
Others
1 pH content PH值 ISO 3071
2Formaldehyde
content甲醛 ISO 14184-1
3
Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
Ivory & Ecru color)
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1 • Color staining: 4-5 min.
For Men's Cotton Nylon
Socks
Additional Mandatory Requirements (for Children category upto 3 years)
580
Additional Mandatory Requirements (for Children category from 3 to 14 years)
Determination of
weight of SocksSASO 2636:2006
500
175, +/- 5%
织物密度
• For 0-3 years: 4.0 – 7.5
• Direct skin contact: 4.0 – 7.5
• Non direct skin contact: 4.0 - 9.0
• Babies & Children ( < 14 years ) : < 20 ppm
GPT 18
FULL PACKAGE FOR SOCKS (Applicable for 95% cotton OR Nylon content Only)
800
Mass of 10 pairs (
gms)
Cotton
650
725
Requirements
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
• As per clause 6 of SASO 2636
3
470
540
Report actual or +/-5% from claims
31 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
3Color Fastness to
Washing 水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
4 pH content PH值 ISO 3071
1Formaldehyde
content甲醛 ISO 14184-1
2
Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
Ivory & Ecru color)
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
1 &Appearance after
Wash OR水洗外观 AATCC 135 / 150
2Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor
which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant
odour found". 1 per color way
• Satisfactory (Must comply general requirement)
• For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
• For 55:45 polyester : wool blend:5.5 – 8.5
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
• Color staining: 4-5 min.
Additional Mandatory Requirements (for Children category from 3 to 14 years)
• Babies & Children ( < 14 years ) : < 20 ppm
• Others : < 75 ppm
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
Additional Mandatory Requirements (for Children category upto 3 years)
Requirements
• As required
• Color change: 4 (min.)
• Color Staining: 4 (min.)
GPT 19
FULL PACKAGE FOR SOCKS (Others)
Requirements
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
32 of 57
Sr.No Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护
标)SASO 1173/1174
Color fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean干洗色牢度
ISO 105 D01 SASO
2324 : 2005
4 pH content PH 值 ISO 3071
5
Garment Weight
(Report weight of
full sweater in gm,
mention size of the
sweater received)
BS EN 12127
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗外观 AATCC 135 / 150
Appearance after
Dry clean干洗外观 Commercial Dry clean
2Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
GARMENT PACKAGE
• As required
GPT 20
(Supplier must send the full contracted sample for testing)
3
FULL PACKAGE FOR SWEATER (ADULT)
• Change in color – 4 ( min.)
• Color Staining – 4 ( min.)
• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
Requirements
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
Requirements
1 &
• After 24 hours of open package conditioning. Garments shall not have any unpleasant
odor which would prevent customer from purchasing. Report as Unsatisfactory if any
unpleasant odour found". 1 per color way
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
• For 0-3 years: 4.0 – 7.5 •
For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
• Report actual or +/- 5% from claim
• Satisfactory (Must comply general requirement)
• Satisfactory (Must comply general requirement)
33 of 57
Sr.No Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
Color fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean干洗色牢度
ISO 105 D01 SASO
2324 : 2005
4 pH content PH 值 ISO 3071
5Formaldehyde
content甲醛 ISO 14184-1
6
Garment Weight
(Report weight of
full sweater in gm,
mention size of the
sweater received)
BS EN 12127
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗外观 AATCC 135 / 150
Appearance after
Dry clean干洗外观 Commercial Dry clean
2Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
1 &
• Satisfactory (Must comply general requirement)
• Satisfactory (Must comply general requirement)
• As required
• Report actual or +/- 5% from claim
Requirements
3
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)
• After 24 hours of open package conditioning. Garments shall not have any unpleasant
odor which would prevent customer from purchasing. Report as Unsatisfactory if any
unpleasant odour found". 1 per color way
• Change in color – 4 ( min.)
• Color Staining – 4 ( min.)
• For 0-3 years: 4.0 – 7.5 •
For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
• Babies & Children ( < 14 years ) : < 20 ppm
GARMENT PACKAGE
FULL PACKAGE FOR SWEATER ( 8-14 Yrs. )
(Supplier must send the full contracted sample for testing)
Requirements
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
GPT 21
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
34 of 57
Sr.No Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
Color fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean干洗色牢度
ISO 105 D01 SASO
2324 : 2005
4 pH content PH 值 ISO 3071
5Formaldehyde
content甲醛 ISO 14184-1
6
Color fastness to
saliva ( for 0-3 yrs.
only)
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1
7
Garment Weight
(Report weight of
full sweater in gm,
mention size of the
sweater received)
BS EN 12127
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗外观 AATCC 135 / 150
Appearance after
Dry clean干洗外观 Commercial Dry clean
2Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
GPT 22
1 &
• Satisfactory (Must comply general requirement)
• Satisfactory (Must comply general requirement)
• As required
• Report actual or +/- 5% from claim
• Color staining: 4-5 min.
3
• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)
GARMENT PACKAGE
FULL PACKAGE FOR SWEATER ( 0 - 8 Yrs. )
(Supplier must send the full contracted sample for testing)
Requirements
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
• Change in color – 4 ( min.)
• Color Staining – 4 ( min.)
• For 0-3 years: 4.0 – 7.5 •
For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
• Babies & Children ( < 14 years ) : < 20 ppm
Requirements
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
• After 24 hours of open package conditioning. Garments shall not have any unpleasant
odor which would prevent customer from purchasing. Report as Unsatisfactory if any
unpleasant odour found". 1 per color way
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
35 of 57
Sr. No. Test Description 测试项目 Method / Standard
Color Fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean干洗色牢度
ISO 105 D01:2010
SASO 2324:2005
2 pH content PH值 ISO 3071
3
Garment Weight
(Report weight of
full sweater in gm,
mention size of the
sweater received)
BS EN 12127
1Formaldehyde
content甲醛 ISO 14184-1
2
Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
Ivory & Ecru color)
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1
PRODUCT PERFORMANCE TESTING
Appearance after
Wash OR水洗外观 AATCC 135 / 150
Appearance after
Dry clean干洗外观 Commercial Dry clean
2Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
• For 0-3 years: 4.0 – 7.5 • For
Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
• For 55:45 polyester : wool blend:5.5 – 8.5
• Report actual or +/- 5% from claim
Additional Mandatory Requirements (for Children category upto 14 years)
• Babies & Children ( < 14 years ) : < 20 ppm
• Color staining: 4-5 min.
1 &
• Satisfactory (Must comply general requirement)
• Satisfactory (Must comply general requirement)
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
• After 24 hours of open package conditioning. Garments shall not have any unpleasant
odor which would prevent customer from purchasing. Report as Unsatisfactory if any
unpleasant odour found". 1 per color way
Requirements
(Supplier must send the full contracted sample for testing)
1
• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)
• Change in color – 4 ( min.)
• Color Staining – 4 ( min.)
GARMENT PACKAGE
GPT 23
ADDITIONAL COLOUR PACK FOR SWEATER
36 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
3Color fastness to
Washing水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
4 pH content PH值 ISO 3071
5Bursting Strength (
For Knits)胀破强度
ISO 13938 - 1
(d = 30.5 mm)
1Formaldehyde
content甲醛 ISO 14184-1
2
Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
Ivory & Ecru color)
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
1Stretch & Recovery
(WEFT KNITS)
ASTM D2594
(Modified)
Course direction only
Number of
Readings
(Total Repetitions)
3 per Color
(Maximum 2
Colors)
2
Tension &
Elongation
(WARP KNITS)
ASTM D2594
(Modified) For both
Course & Wale direction.
Only for Elastane content
more than 10%
Number of
Readings
(Total Repetitions)
3 per Color
(Maximum 2
Colors)
3Fabric / Garment
odourVisual Check
• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor which
would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant odour found".
1 per color way
* Tested in Course & Wale direction
Report both growth and recovery.
Recommended Growth results: Elongation
75% lengthwise max ; 120% widthwise max Do not Pass or
fail based on growth. Pass or Fail based
on Recovery only. Recovery Minimum 85%
• Babies & Children ( < 14 years ) : < 20 ppm
• Color staining: 4-5 min.
• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)
Additional Mandatory Requirements (for Children category upto 14 years)
• For ≤ 170 gsm : 30 lb./sq. inch
• For ≥ 170 gsm: 40 lb. / sq. inch
• For 0-3 years: 4.0 – 7.5
• For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
GARMENT PACKAGE
FULL PACKAGE SWIMWEAR (Supplier must send the full contracted sample for testing)
GPT 24
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
• As required
Requirements
Requirements
* No Elastane Content: Do not Test.
* Tested in Course Direction Only
Elastane Content: Less than 10%:
After 2 hour extension, Measure (C) after 60 minutes. Report both growth and
recovery.
Pass or fail based on growth. Growth: Max. 5%
Elastane Content Equal to or greater than 10%:
After 2 hour extension, Measure (B) after 60 seconds. Report both growth and
recovery.
Pass or fail based on recovery. Recovery: Minimum 85%
* If sample as received Fails:
Report original results - Data Only
After one laundering per care instructions -
Repeat Testing and Pass / Fail based on washed fabric
Pass / Fail based on Each Repetition
37 of 57
Sr. No. Test Description 测试项目 Method / Standard
1Color Fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
2 pH content PH值 ISO 3071
1Formaldehyde
content甲醛 ISO 14184-1
2
Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
Ivory & Ecru color)
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
1Fabric / Garment
odourVisual Check
• Color change: 4 (min.)
• Color Staining: 4 (min.)
• Babies & Children ( < 14 years ) : < 20 ppm
• Color staining: 4-5 min.
For 0-3 years: 4.0 – 7.5
For Direct skin contact: 4.0 – 7.5
For Non direct skin contact: 4.0 – 9.0
Additional Mandatory Requirements (for Children category upto 14 years)
• After 24 hours of open package conditioning. Garments shall not have any unpleasant
odor which would prevent customer from purchasing. Report as Unsatisfactory if any
unpleasant odour found". 1 per color way
Requirements
GPT 25
ADDITIONAL COLOUR PACK FOR SWIMWAER
Requirements
38 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
3 PU Analysis PU 分析 FTIR
Color fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean干洗色牢度
ISO 105 D01
SASO 2324 : 2005
5 pH content PH值 ISO 3071
1Formaldehyde
content甲醛 ISO 14184-1
2
Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
Ivory & Ecru color)
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗外观 AATCC 135 / 150
Appearance after
Dry clean干洗外观 Commercial Dry clean
2Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
• Change in Color: 4 (min.)
• Color Staining: 4 ( min.)
Additional Mandatory Requirements (for Children category upto 14 years)
• After 24 hours of open package conditioning. Garments shall not have any unpleasant
odor which would prevent customer from purchasing. Report as Unsatisfactory if any
unpleasant odour found". 1 per color way
GARMENT PACKAGE
GPT 26
• Change in color – 4 ( min.)
• Color Staining – 4 ( min.)
Requirements
4
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
• Confirm genuine PU
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
• Color staining: 4-5 min.
• As required
FULL PACKAGE FOR PU GARMENT (PVC SHOULD NOT BE DETECTED)
• For 0-3 years: 4.0 – 7.5
• For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
• Babies & Children ( < 14 years ) : < 20 ppm
1 &
• Satisfactory (Must comply general requirement)
• Satisfactory (Must comply general requirement)
Requirements
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
39 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
Color Fastness to
Washing OR水洗外观
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean干洗外观
ISO 105 D01
SASO 2324 : 2005
4 pH content PH值 ISO 3071
1Formaldehyde
content甲醛 ISO 14184-1
2
Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
Ivory & Ecru color)
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗外观 AATCC 135 / 150
Appearance after
Dry clean干洗外观 Commercial Dry clean
2Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
GARMENT PACKAGE
Requirements
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
Additional Mandatory Requirements (for Children category upto 14 years)
1 &
3
• Change in color – 4 (min)
• Color Staining – 4 (min)
• Color change: 4 (min.)
• Color Staining: 4 (min.)
GPT 27
FULL PACKAGE FOR ARTIFICIAL FAKE FUR GARMENTS
• As required
• Color staining: 4-5 min.
• For 0-3 years: 4.0 – 7.5
• For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
• Babies & Children ( < 14 years ) : < 20 ppm
Requirements
• Satisfactory (Must comply general requirement)
• Satisfactory (Must comply general requirement)
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor
which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant
odour found". 1 per color way
40 of 57
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标)
SASO 1173/1174
Color Fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to Dry
clean干洗色牢度
ISO 105 D01
SASO 2324 : 2005
4 pH content PH值 ISO 3071
1Formaldehyde
content甲醛 ISO 14184-1
2
Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
Ivory & Ecru color)
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1
GPT 28
• Color staining: 4-5 min.
FULL PACKAGE FOR HATS , HAND GLOVES , CAP ETC
• For 0-3 years: 4.0 – 7.5
• For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
Additional Mandatory Requirements (for Children category upto 14 years)
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
• As required
• Babies & Children ( < 14 years ) : < 20 ppm
3
• Change in color – 4 (min)
• Color Staining – 4 (min)
• Color change: 4 (min.)
• Color Staining: 4 (min.)
41 of 57
Sr. No. Items Test Method Requirement
SASO 781 : 1994
ISO 5088 No tolerance for single fiber
ISO 1833 Blends: +/- 3% (applicable for Elastane containing blends also)
1(b) Fiber Content for non textile (PU,PVC) In-house Method
1Colorfastness to Rubbing
( ONLY FOR SHELL )ISO 105X12
• Color Change: 4 min.
• Color Staining: 3-4 min.
• Self Staining :4
2 Nickel Spot EN 12471 Not detected
ISO 22775 – 2
(first 24 Hours)
Fiber Content for non-textile bags.
Regarding the composition confirmation of handbags, Landmark requires only the composition
to be verified by the lab, to be placed in care label.
e.g. if the body is PU & the lining is textile, then lab has to confirm the PU by internal method
which is globally recognized & accredited ( e.g. IR spectroscopy method etc.) &
textile part as per existing method.
post which lab will issue test report to the supplier who will print care label
according to lab report
also we don't need %age of PU or PVC, it should just be the confirmation that it's PU.
also don't cut the outer PU layer to take out the inner fabric to find out the composition,
this is not required.
GPT 29
TEXTILE BAGS
OPTIONAL TESTS ( to be advised by QA, not to be performed as a regular test)
LEATHER BAGS & TEXTILE BAGS
3 Corrosion Resistance Not detected
FULL PACKAGE FOR BAG
1(a) Fiber Content for textile (Shell & Lining)
OPTIONAL TESTS ( to be advised by QA, not to be performed as a regular test)
42 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标) SASO 1173/1174
Color Fastness to
Washing水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean干洗色牢度
ISO 105 D01:2010
SASO 2324:2005
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗外观 AATCC 135 / 150
Appearance after
Dry clean干洗外观 Commercial Dry clean
2Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
1 &
• Satisfactory (Must comply general requirement)
• Satisfactory (Must comply general requirement)
• After 24 hours of open package conditioning. Garments shall not have any
unpleasant odor which would prevent customer from purchasing. Report as
Unsatisfactory if any unpleasant odour found". 1 per color way
GPT 30
NOTE: ANY GARMENT HAVING MORE THAN 5% TRIM COVERAGE, THIS TESTING HAS TO BE PERFORMED TESTING MUST BE CARRIIED OUT ALONG
WITH THE MAIN BODY, IF NEEDED, LAB MAY ASK FOR ADDITIONAL GARMENTS.
• As required
FULL PACKAGE FOR LINING
Requirements
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
• Change in Color: 4 (min.)
• Staining: 4 ( min.)
Requirements
• Change in color – 4 ( min.)
• Staining – 4 ( min.)
3
43 of 57
Sr. No. Test Description 测试项目 Method / Standard
1 Fiber Composition 成分
SASO 781 : 1994 ;
ISO 5088 ;
ISO 1833
2
Labelling /
Marking(fiber
composition &care
label)
标签(成分和洗护标) SASO 1173/1174
Color Fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean干洗色牢度
ISO 105 D01:2010
SASO 2324:2005
4 pH content PH值 ISO 3071
1Formaldehyde
content甲醛 ISO 14184-1
2
Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
Ivory & Ecru color)
耐唾液色牢度(仅适用0-
3岁) DIN 53160-1 • Color staining: 4-5 min.
FULL PACKAGE FOR OTHER APPAREL OR TEXTILE ACCESSORIES
• For 0-3 years: 4.0 – 7.5
• For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
3
• Change in color – 4 (min)
• Staining – 4 (min)
• Color change: 4 (min.)
• Color Staining: 4 (min.)
Additional Mandatory Requirements (for Children category upto 14 years)
• Babies & Children ( < 14 years ) : < 20 ppm
GPT 31
Requirements
• As required
• Follow 16 CFR 303
• No tolerance for single fiber
• Blends: +/- 3% (applicable for Elastane containing blends also)
44 of 57
Sr. No. Test Description 测试项目 Method / Standard
Color Fastness to
Washing OR水洗色牢度
AATCC 61:2010
SASO 170:2005
SASO 2329:2005
Color Fastness to
Dry clean干洗色牢度
ISO 105 D01:2010
SASO 2324:2005
2 pH content PH值 ISO 3071
ApplicabilityFabric
weight
Only for 100 %
Cotton
271 gm/sqm.
(8 oz/sq yd)
or Less
1Formaldehyde
content甲醛 ISO 14184-1
2Color fastness to
saliva ( for 0-3 yrs.
only)(Except White,
耐唾液色牢度(仅适用0-3岁)
DIN 53160-1
PRODUCT PERFORMANCE TESTING
Sr. No. Test Description 测试项目 Method / Standard
Appearance after
Wash OR水洗外观 AATCC 135 / 150
Appearance after
Dry clean干洗外观 Commercial Dry clean
3Fabric / Garment
odourVisual Check
1 &
a. Color change & Cross staining within the garment
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
GARMENT PACKAGE
GPT 32
Additional Mandatory Requirements (for Children category upto 14 years)
• Babies & Children ( < 14 years ) : < 20 ppm
Warp : kg (min) Weft : kg (min)
18
3
ADDITIONAL COLOUR PACK FOR GARMENTS (ONLY DENIM)
Requirements
1
• Non indigo dyed : Color change - 3.5 (min), Color staining : 3 (min)
• Indigo dyed & sulfur black colors. Color change - 2 min, Color staining - 2 min
• Color change: 4 (min.)
• Color Staining: 4 (min.)
1 &
• Satisfactory (Must comply general requirement)
• Satisfactory (Must comply general requirement)
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
2Upto 5 oz. 25 lbs.
5.01 - 8 oz. 30 lbs.
Above 8 oz. 45 lbs.
• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor
which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant
odour found". 1 per color way
**** Garments made by Indigo dyed fibers will be considered in Denim category & these will be tested at 40 deg else all will lie in non-indigo category
For Denims Seam
Strength 接缝滑移 ASTM D 1683
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
• For 0-3 years: 4.0 – 7.5 •
For Direct skin contact: 4.0 – 7.5
• For Non direct skin contact: 4.0 – 9.0
• For 55:45 polyester : wool blend:5.5 – 8.5
• Color staining: 4-5 min.
Requirements
For all type of
fabrics
Weight (oz. / sq. yd.) Seam Strength : lbs.
Tensile Strength
(Only for Adult & 8-
14 yrs)
拉伸强度 ASTM D 5034:2009
36
45 of 57
Sr. No. Test Description 测试项目 Method / Standard
1Pull of strength (
Age upto 3 yrs.)
拉力(3岁及以下
)BS EN 71 Part- 1
2
Cords & Drawstring
on Children's
clothing
童装绳索安全 EN 14682
1
Flammability (
Applied to nightwear
upto 14 yrs.)
防火(适用于12岁
及以下的睡衣)EN 14878
Sr. No. Test Description 测试项目 Method / Standard
Fabric Weight in
gms
< 80
80-140
140-200
200-250
80-140
140-200
200-230
230-270
> 270
≤ 140
> 140
Primary Fabric
Weight (gms)
≤ 90
90-120
120-150
150-180
180-240
240-300
> 300
≤ 80
80-140
140-200
200-230
230-250
250-270
> 270
Primary Fabric Type
Primary fabric
Weight oz./ yd2 &
gms
≤ 90
90-120
120-150
150-180
180-240
240-300
> 300
≤ 80
80-140
140-200
200-230
230-250
250-270
> 270
EN 71 part - 1
No small parts, sharp points/sharp edges before and after abuse tests
- Torque test
Torque Rotation of 180 o torque of 0.34Nm period of 5 sec,
maintain for 10 sec in clockwise & anticlockwise direction
Tension test
*(50+2) N when the largest accessible dimension of the component to be gripped and tested is
6mm or less.
*(90+2) N when the largest accessible dimension of the component to be gripped & tested is
greater then 6mm. Apply
the force gradually over a period of approx. 5 sec maintain for 10 sec
Chemical Safety: Optional Testing Applied to nightwear upto 14 yrs.
Class A - All nightwear ( except Pyjamas). There shall be no surface flash. The 3rd marker
thread must not be servered in less than 15 sec
ADITIONAL TEST
(A) OPTIONAL TESTING ( ON BUYERS DESCRETION )
Physical Safety: Optional Testing For Children Garment 0-8 years.
Requirements
Minimum 90 N
Must comply
3
Small parts (0-3 yrs.
old) Sharp points &
sharp edges (0-8 yrs.
old)
小物件(0-3岁)
尖点&利边(0-
8岁)
7.0 9.0
8.0 10.0
10.0 13.0
Requirements
1
For Wovens Seam
slippage & Seam
strength
接缝滑移&强度ISO 13936-1 ISO
13935-2
Seam slippage (kg)
(For Seam Opening
6.00 mm)
Seam strength (Kg)
Tops & Blouses
4.0 6.0
Bottoms (Pyjamas/
Lining / Trousers
/Formal skirts)
7.0 9.0
8.0 11.0
10.0 13.0
12.0 17.0
Warp (kg) Weft (kg)
All pile fabric (Corduroy,
Velveteen, Velvet &
Terry), Flannel &
Seersucker fabrics
7 4.5
12
16.0 21.0
Skirts & Dresses : Only
for loose fitted garment
4.0 6.0
7.0 9.0
25 18
32 22
8
16 9
18 11
20 14
20
23 23
25 25
3For Wovens Tear
Strength撕裂强度 ISO 13937-part 1
Warp (gms)
Other wovens
(except 55:45 polyester :
wool & 65:35 polyester :
cotton blend)
9 7.5
12 10
15 13
17 15
20
2For Wovens
Tensile Strength拉伸强度
ISO 13934 – 2
( 1 inch grab test)
1000 900
1200 1000
1500 1150
Weft (gms)
All pile fabric (Corduroy,
Velveteen, Velvet &
Terry), Flannel &
Seersucker fabrics
550 550
680 590
770 680
900 800
1200 1100
1300 1100
1350 1200
Other wovens
(except 55:45 polyester :
wool & 65:35 polyester :
cotton blend)
400 400
600 600
800 800
1000 1000
46 of 57
Weight (gms)
Upto 170 gsm
170-255 gsm
Above 255 gsm
Weight (gms)
Upto 170 gsm
170-255 gsm
Above 255 gsm
8 Bursting Strength 胀破强度ISO 13938 - 1
(d = 30.5 mm)
9
Color fastness to
Rubbing (Except
White, Ivory & Ecru
color)
摩擦色牢度(除白色、象牙色&米白
色)
ISO 105 X 12
KNITS- ISO 12945 -1
(pill box method) – 14,400
rev., 4 H.
(10,800 rev., 3H for
blends with Wool).
WOVENS &
Tricot(circular knits)-ISO
12945-2 (Martindale
method)
1 UV Protection 防紫外光 EN 13758 - 1
2Color Fastness to
Chlorinated water氯水色牢度 ISO 105 E 03
1 Tensile Strength 拉伸强度ASTM D 5034 : 2009
(1 inch grab test)
2 Seam Strength 接缝强度 ASTM D 1683 : 2007
3 Bursting Strength 胀破强度ISO 13938 - 1
(d = 30.5 mm)
1 Pile Loss IHTM 26
1Color fastness to
Light光照色牢度
ISO 105 B02
(upto grade 5)
1Color Fastness to
Chlorinated water氯水色牢度 ISO 105 E 03
FOR SWIMWEAR
• Change in color:
- Medium to dark – 3.5
- Pastels, bright & neon's – 3.0
Weft : kg (min)
100 % Cotton & Others 36 18
6For Denims
Tensile Strength拉伸强度 ASTM D 5034:2009
• For ≤ 170 gsm : 30 lb./sq. inch
• For ≥ 170 gsm: 40 lb. / sq. inch
• Light color – Dry 4, Wet 3-4(min)
• Dark colors- Dry 3-4, wet 3(min)
• For pigment prints / indigo dyed products: Dry -3, Wet 2-3 (min)
FOR SWIMWEAR
• Change in color:
- Medium to dark – 3.5
- Pastels, bright & neon's – 3.0
7 Mass per unit area 克重 ISO 3801• For 65% Polyester / 35% Cotton fabric ≥ 85gsm
Others report actual or +/- 5% from claim
• 4 (min.)
FOR HATES,GLOVES,CAP
• Change in color:
- Medium to dark – 4-5 min.
- Pastels, bright & neon's – 4.0 min
10
Warp : kg (min)
Weft in Kg
1.8 1.4
3.6 1.6
5.2 1.8
4For Denims Tear
Strength ASTM D 1424 For all
Warp in Kg
11 kg
13.5 kg
22 kg
5For Denims
Seam Strength 接缝滑移 ASTM D 1683 For all
Seam Strength : kg
(min)
FOR ARTIFICIAL FAKE FUR
Pilling 起毛起球
• Knitted – 3-4*
• Wool/Wool blends – 3*
• Woven (2000 rubs) – 4. *
• Tricot (500 rubs) – 3*.
• *assessment after washing
(5A@40 degree C – Flat)
• 50 +
FOR PU GARMENT
• 35 kg / min
• 15 kg / min
• For ≤ 170 gsm : 30 lb./sq. inch
• For ≥ 170 gsm: 40 lb. / sq. inch
47 of 57
Seam strength should cover both shell & lining.
NO AZO dye test should be conducted for white color. AZO test will be applicable if White color is treated with Optical whitener.
When applicable, conduct 3 colors in one AZO test.
In case of forbidden amine detection in a mixed test, a retest has to be conducted systematically on each color to find out the problematic color.
Garments having trims of more than 5% coverage, colorfastness to washing of trims should be performed.
For garments having lining, the lining will be evaluated for fiber analysis & color fastness to washing.
Children wear safety requirements (pH, formaldehyde & saliva) will be applied to all the colors, when different patterns / combinations submitted.
Pull test for children wear apparel to be conducted only on functional trims (buttons, snaps & rivets), not to be conducted on decorative trims & zippers.
Testing instructions:For PU garments, no PVC should be detected.
Print durability will be applied only for garments having AOP (all over print), motif prints, embroidery, applique etc. For solid colors, this test should not be performed.
For full white/cream/ecru colors, there is no need to test colorfastness to Rubbing.
f. Opening of seam ( grinning) or seam slippage
g. Satisfactory appearance of trims / embellishments
h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.
b. Color staining & Cross staining in the multi-fiber strip
c. Pilling or Fuzzing
d. Spirality or Seam twist ( max. 5% for knits is allowed)
e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having upto 65 % Viscose Content or more)
(B) General Note:
Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:
a. Color change & Cross staining within the garment
48 of 57
- Labs need to note any contrast fabric or trim used in the garment
- Test standards & specification needs mention along with test values
For garments with lining
Indicate if the test report is a resubmission
- shell and lining reports should be mentioned separately in the report
- for multiple colors, report should mention “A”, “B” etc. for different colors
All test reports should have unique report number for traceability
For garments where fabric reports are already available, the gmt report should have a mention of the fabric evaluation report number
- Image of the product
- Photograph of before wash & after wash of the merchandise
- Summary of the test repot should be on the cover page
- Report summary should clearly mention Pass/Fail status of the merchandise under the mandatory requirements.
- Care instruction in the care label ( provided by the supplier)
- Claimed fiber composition & fabric construction
- End use e.g. skirts, trousers etc.
- Category e.g. adult / children / babies
- Complete details of the supplier ( name, contact person, contact details)
- PO number
- Style number
- Date of submission & completion date
(C) Laboratory Responsibilities All Landmark samples should be evaluated according to agreed test package & requirement.
Lab to ensure that correct Landmark standards are being followed.
Labs are required to always include the following information in the test report:
49 of 57
- Claimed fiber composition & fabric construction
- End use e.g. skirts, trousers etc.
Category e.g. Men / Ladies /8-14 yrs. Kids (Boy/Girl )/ 2-8Yrs Kids (Boy/Girl ) / Infants
- Complete details name, contact person, contact details
- PO number
- Style number
Care instruction in the care label ( provided by the QA on QA data Sheet)
· Indicate whether further processing will take place e.g. placement prints, garment washing etc.
· Request a test report to be delivered with the production fabric.
· Ensure all parameters in the test report conform to Landmark requirements before production.
Vendors are required to always include the following information in the test request form:
(D) Vendor responsibility · Understand Landmark requirements
· The fabric purchase order must include Landmark requirements.
· Indicate whether contrast trims will be used in the garment e.g. this fabric will be trimmed with white binding.
50 of 57
Products Regulated by Egyptian Customs: Textiles (Only Chemical Test)
Products that are covered under textiles are:
Home Textiles (ES 7266-3/2011),
Garments + Readymade Clothes (ES 7266-4/2011),
Rugs and Carpets (ES 7266-5/2011).
Table: 1
Testing Requirement as per Egyptian Standard ES 7266-3/2011:
TEST REQUIREMENTS Standard Reference
Detection of banned Azo-dyes UNE-EN 14362- 1
Navy blue UNE-EN 14362- 2
BABIES: 20 ppm UNE-EN ISO 14184-1
Direct contact : 75 ppm UNE-EN ISO 14184-2
Without direct contact : 300 ppm
Chromatographic analysisLC-MS & UPLC-SQD
DIN54231
64LFGD 82.02-10
EN 1122
ASTM E1645
0.5 µg/cm2/week
(Only metal parts)
Table: 2
Testing Requirement as per Egyptian Standard ES 7266-4/2011:
TEST REQUIREMENTS Standard Reference
Detection of banned Azo-dyes UNE-EN 14362- 1
Navy blue UNE-EN 14362- 2
BABIES: 20 ppm
Direct CONTACT: 75 ppm UNE-EN ISO 14184-1
Without direct CONTACT: 300 ppm UNE-EN ISO 14184-2
Chromatographic analysisLC-MS & UPLC-SQD
DIN54231
64LFGD 82.02-10
EN 1122
ASTM E1645
0.5 µg/cm2/week
(Only metal parts)
CPSC-CH-E1002-08 (non-metal)
300 ppm CPSC-CH-E1001-08 (metal)
(only for children < 12 years.) CPSC-CH-E1003-09 (Surface coating)
ASTME1645 & ASTM E1613
1000 ppm
(only for children < 12 years.)
Table: 3
EGYPT STANDARDS ( Below will be Tested if signed GCC document is not provided to Max & copy to Testing Lab. ) Company Name should
Match on TRF & GCC
(E) EGYPT Testing method, Limit & Requirement
Forbidden
ForbiddenDetection of Carcinogenic dyes
Forbidden
EN 15777Phthalates
SCOPE OF PRODUCTS: All kinds of Garments, clothing, and embroideries for men, women, children, girls and boys in different fabrics and all sizes.
Formaldehyde
Cadmium Forbidden
Lead
ForbiddenDetection of Carcinogenic dyes
Nickel (SCREEING TEST) EN 1810 & EN 1811 & EN 12472
SCOPE OF PRODUCTS: All kinds of Tapestries, hyraxes, blankets and curtains manufactured of all types. Which includes bath towel, hand towels, pillows,
cushions, cushion filler, bathrobes, bed sheets, mattress topper, comforter, cushion cover, duvet cover, pillow cover, placemat, table cover, table runner
used inside and outside home.
Formaldehyde
Cadmium Forbidden
Nickel (SCREEING TEST) EN 1811 & EN 12472
51 of 57
Testing Requirement as per Egyptian Standard ES 7266-5/2011:
TEST REQUIREMENTS Standard Reference
Detection of banned Azo-dyes UNE-EN 14362- 1
Navy blue UNE-EN 14362- 2
Formaldehyde 300 ppm UNE-EN ISO 14184-1
UNE-EN ISO 14184-2
Auxiliary materials used in dyes, printing and
preparation:Tris phosphine oxide (azir dinyl) Chromatographic analysis
Tris phosphate (2,3 di bromo propyl) HPLC
Poly bromo bi phenyls (PBB)
(only applicable for Carpets and Rugs)
Chromatographic analysisLC-MS & UPLC-SQD
DIN54231
64LFGD 82.02-10
EN 1122
ASTM E1645
16 C.F.R. 1630, 1631
Flammability
Seven out of eight samples passing such that
the area between the carbonised part to the
surround does not exceed 2.54 cm (one inch)
Cadmium Forbidden
Forbidden
Detection of Carcinogenic dyes
Forbidden
Forbidden
SCOPE OF PRODUCTS: Rugs and Floor covering (cotton bath mats) and carpets manufactured from natural or manufactured or compound fibers (whether
woven or otherwise) whether manufactured by hand or by machine.
52 of 57
Table 1A- Textile, Apparel & accessories, Home Textile articles.
Table 1B -Rugs & carpets Articles.
Table 1C-Textile Bags and Purses.
Table 1D-Leather Garments, Bags and purses.
Table 1E- General Shoes.
Table1F- Sports shoes.
Table 2-Banned Pesticides.
Table 3-Banned Alleragens dyestuffs.
Table 4-Banned Chlorinated Organic Carriers.
Table 5-Forbidden flame retradants.
Table 6-Forbidden phthalates in children's clothing.
Table 7-Banned Azo colorants.
Table 8-Banned dyestuffs classified to be carcinogenic.
Name &Designation
GENERAL CERTIFICATE OF CONFORMITY
Phone :
Buyer Name :
Supplier Number:
Please sign this page and return only this page to Max office along with scan copy to Buyer's
Max reserve the right to cancel the order or, if already delivered, return the goods if any of the statements in Max’s GCC requirements will fail in a test
according to a standard method; and Hold me/us (manufacturer /exporter) responsible for all damages caused by products that do not meet the custom
regulatory requirements of different country where max retails.
This is to confirm to you that we, the below registered company and supplier to Max, adheres to the issued GCC /LCR (General certificate of conformity
/Landmark group's Chemical Restrictions Policy.) I/We commit to comply with Max’s GCC Requirement and acknowledge that Max RetailLLC or their
designated consolidators reserve the right to check any order, by any method, at any stage of production;
We confirm we do not supply product that has any of the banned substances as quoted in the document version MX/GCC/001/2012 which covers the
following categories:-
Department :
Company name Company Chop
Contact Person:
Email:
Address:
I/We hereby confirm that I/we have read and taken proper care of all Chemical restrictions citied above while Manufacturing Fabric, ordering
TRIMS for Max orders.
53 of 57
Sr.
No.Test Description 测试项目 Method / Standard
1
Total Lead
(for children ≤ 14 years
old)
总铅(12岁以下儿童
)
US EPA 3051/3052 analysis with ICP
-EN 71 part 3
2
Phthalates *
(for children ≤ 14 years
old)
邻苯二甲酸盐*
(12岁以下儿童
)
EN 15777 & CPSC-CH – C1001-09.3
3 Nickel release** 镍释放** EN 1811 & EN 12472
4 Total Cadmium *** 总镉***EN 1122 & microwave digestion
method
5 PBB s**** 多溴联苯**** GC- MS method
6 TRIS**** ( TDBPP) 三(2,3-
二溴丙基)磷酸酯*LC – MS method
7 TEPA ****三(吖丙啶基)氧化磷****
LC – MS method
8 Carcinogenic dyes 致癌染料 DIN 54231
Requirements
• Prohibited ( 10 ppm)
• Prohibited ( 10 ppm)
• Prohibited ( 1 mg/l)
• 90 PPM
• New limit; Total Lead in accessible scrapable surface
coatings
- less than 90 ppm for all painted materials & those
with surface coatings (Clothing, footwear, accessories
& home textiles mainly).
• Sum of 6P ( DEHP, DBP, BBP, DIDP, DINP,
DNOP) : 0.1 % ( 1000 PPM)
• 0.5 µg/cm2/week
• Prohibited ( 100 ppm)
• Prohibited ( 10 ppm)
(G) OPTIONAL TEST PACKAGE BASED ON CASE BASIS ( For EGYPT )
*required for coated leather, artificial leather ( PU, PVC, rubber, EVA), various plastics and printed fabrics.
**only required for metal component
***only required for surface coating, printed fabric and plastic component
****only required for material with flame retardant finishes
54 of 57
1) Hand Wash
Only Hand wash
Maximum temperature 30 deg C
Line Dry
Handle with care
1.1) Hand Wash
Only Hand wash
Maximum temperature 30 deg C
Line Dry
Handle with care
2) Regular Wash
Machine wash
Maximum temperature 30 deg C
Mechanical action normal
Rinsing & Spinning normal
3) Regular Wash Gentle cycle
Machine wash
Maximum temperature 30 deg C
Mechanical action much reduced
Rinsing normal & Spinning reduced
4) Regular Wash - For Denims
Machine wash
Maximum temperature 40 deg C
Mechanical action normal
Rinsing & Spinning normal
(I). WASHING INSTRUCTIONS
If care symbols says 30 deg machine wash or hand wash then follow as below
AATCC 61 - 1B for all machine washable styles. (10 rubber balls, 20 min cycle, tested at 30 deg )
AATCC 61 - 1B for all hand washable styles. (10 rubber balls, 20 min cycle, tested at 30 deg )
56 of 57