versaparts - frontcover · to the owner/operator/dealer all implements with moving parts are...

ALAMO INDUSTRIAL1502 E. WalnutSeguin, Texas 78155830-372-3551

PARTS MANUAL

© 2003 Alamo Group Inc.

VERSAPublished 04/03 Effective Serial No. 01001 through Current PartNo.02897300P

TO THE OWNER/OPERATOR/DEALERAll implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe mindedoperator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer hasdesigned this implement to be used with all its safety equipment properly attached to minimize the chance ofaccidents.

BEFORE YOU START!! Read the safety messages on the implement and shown in your manual.Observe the rules of safety and common sense!

WARRANTY INFORMATION:

Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Formin full and return it to within 30 Days. Make certain the Serial Number of the Machine is recorded on the WarrantyCard and on the Warranty Form that you retain.

PARTSSECTION

Parts Section 6-1

Parts Section 6-2VERSA 04/03

PAR

TS


For maximum safety and to guarantee optimum product reliability, always usegenuine Alamo Group Parts. The use of inferior replacement parts may causepremature or catastrophic failure which could result in serious injury or death.Direct any questions regarding parts to:

The following instructions are offered to help eliminate needless delay and error in processingpurchase orders for the equipment in this section.

1. The Parts Section is prepared in logical sequence and grouping of parts that belong to thebasic machine featured in this manual. Part Numbers and Descriptions are given to helplocate the parts and quantities required.

2. The Purchase Order must include the name and address of the person or organizationordering the parts, who should be charged, and if possible, the serial number of the machinefor which the parts are ordered.

3. The Purchase Order must clearly list the quantity of each part, the complete and correct partnumber, and the basic name of the part.

4. The Manufacturer reserves the right to substitute parts where applicable.

5. Some parts are unlisted items which are special production items not normally stocked andare subject to special handling. Request a quotation for such parts before sending aPurchase Order.

6. The Manufacturer reserves the right to change prices without prior notice.

NOTE: Please refer to The Safety Section in the front of this Manual for the proper PartNumber when ordering Replacement Safety Decals.

NOTE: Please note that the appearance of some parts may vary from the art orphotographs shown in the manual.

ALAMO INDUSTRIAL1502 E. WalnutSeguin, Texas 78155830-372-3551

PARTS ORDERING GUIDE

Parts Section 6-3VERSA\5-91

PAR

TS


PARTS TABLE OF CONTENTS

Control Console ....................................................................................................................................... 6-4Cutter Valve ............................................................................................................................................. 6-5Extension Arm ......................................................................................................................................... 6-7Cylinder - Lift ........................................................................................................................................... 6-8Cylinder - Tilt ........................................................................................................................................... 6-9Oil Reservoir ............................................................................................................................................. 6-10Spindle Housing ....................................................................................................................................... 6-11Versa Mower ............................................................................................................................................ 6-12Pump Assemblies ................................................................................................................................... 6-24Speed Increaser ....................................................................................................................................... 6-39Versa Mower Accessories....................................................................................................................... 6-41Versa Ditcher ........................................................................................................................................... 6-43Versa Boom ............................................................................................................................................. 6-5660" Square Head...................................................................................................................................... 6-71Counterweight Assembly ......................................................................................................................... 6-76Versa Boom Insert Assembly ................................................................................................................. 6-77Valve Bank w/ Fittings ............................................................................................................................. 6-78King Post Assembly ................................................................................................................................ 6-8160" Versa Flail ......................................................................................................................................... 6-8474" Versa Flail ......................................................................................................................................... 6-88Hydraulic Motor ..................................................................................................................... 6-92Heavy Duty Flail Assembly ..................................................................................................................... 6-94Cuttershaft Driveside Assembly .............................................................................................................. 6-96Cuttershaft Non - Driveside Assembly ....................................................................................... 6-97Caster Wheel Assembly ..........................................................................................................6-9850" Blade Bar Assembly ......................................................................................................... 6-99Cutting Head Flail Axe ............................................................................................................ 6-10050" X - Frame Square Head Assembly ................................................................................................... 6-102Stump Jumper Pan Assembly ..................................................................................................6-105Blade Bar w/ Grass Blades ..................................................................................................................... 6-106Blade Bar w/ Straight Blades .................................................................................................................. 6-107Hydraulic Motor Repair Parts ...................................................................................................6-108Valve Bank Cover ..................................................................................................................................... 6-111Valve Remote Control .............................................................................................................................. 6-112Heavy Duty Extension Arm ..................................................................................................................... 6-114Tilt Cylinder Assembly ............................................................................................................................ 6-115Valve Cover Installation ............................................................................................................................ 6-116Valve Assembly - Versa Mower/Flail ...................................................................................................... 6-117Skid Shoe Extension ............................................................................................................................... 6-118TimberCat Assembly ............................................................................................................................... 6-128Buzzbar Assembly .................................................................................................................................. 6-130

DEEP DECK OPTIONDeep Deck Mower Assembly .................................................................................................................. 6-119Deep Deck Motor and Spindle Assembly ............................................................................................... 6-120Spindle Housing and Spindle Assembly ................................................................................................. 6-121Blade Bar Assembly ................................................................................................................................ 6-122Deep Deck Hydraulic Motor Assembly ................................................................................................... 6-123Hydraulic Motor Repair Parts (02961732) ............................................................................................... 6-125Hydraulic Schematic ............................................................................................................................... 6-126Hydro-Float Option .................................................................................................................................. 6-127

R 10-18-01

VERSA and TERRAIN KING are registered trademarks of Alamo Group Inc.


PAR

TS


CONTROL CONSOLE ASSEMBLY

ITEM PART NO. QTY DESCRIPTION

1 02958270 1 Support Arm Valve Mt. Weldment(For Versa Ditcher Valve)

02966494 1 Support Arm Valve Mt. Weldment(For All Other Valves)

2 00008300 2 Bolt3 00010300 2 Lockwasher4 00010400 2 Nut* 00011100 2 Flat Washer* 00015800 2 Locknut* 02961090 1 Solenoid Cutter Valve Assembly* 02964028 1 Push Pull Switch* 02964063 1 Knob, Switch* 02957009 2 Bolt* 02958203 1 Wire Harness12 02957364 1 Head Retainer Assembly

02957363 1 Head Retainer Weldment00010300 1 Lockwasher00010400 1 Nut

* These Parts are not shown, but are part of assembly p/n 02961145


PAR

TS


CUTTER VALVE ASSEMBLY

56

7

ASSEMBLY P/N 02963902


1* 02960565 1 Cutter Valve2* 02960807 3 Straight Adapter3* 02961003 1 Straight Adapter4 02958203 1 Wire Harness5 02964028 1 Switch - Push Pull6 02964063 1 Knob7* 63042700 1 Straight Adapter

* These parts are included in Cutter Vave Assembly p/n 02963902

R 2-12-96


PAR

TS


CARTRIDGE VALVEINSTALLATION PROCEDURE

1. Visually inspect the manifold block to make sure cavities are free ofcontamination including machining burrs and chips.

2. Check the cartridge valve to be sure it is free of visible contamination.3. Be sure o-rings and/or split back-up rings are arranged properly on valve

and are not damaged.4. Dip cartridge valve in clean oil up to the threads to lubricate seals.5. Carefully screw cartridge into proper cavity.

CUTTER VALVE


02960565 Complete Assembly

1 02965223 1 Solenoid Complete (S/N 02504 and After)02961265 1 Solenoid Complete (S/N 02503 and Prior)

2 02965222 1 Solenoid Coil (S/N 02504 and After)02961263 1 Solenoid Coil (S/N 02503 and Prior)

3 02965221 1 Solenoid Valve w/Seals (S/N 02504 and After)02961264 1 Solenoid Valve w/Seals (S/N 02503 and Prior)

4 02961271 1 Pilot Piston w/Seals5 02961261 1 Relief Valve

02961262 1 Seal Kit - Relief Valve6 02961267 1 Logic Valve

02961268 1 Seal Kit (Logic Valve)7 02961269 1 Check Valve

02961270 1 Seal Kit (Check Valve)8 02961266 1 Solenoid Valve Seal Kit

R 8-1-94

1

2

3

4

5

6

8

7


PAR

TS


EXTENSION ARM ASSEMBLY

To "B" Port of Tilt Section(Color Code Blue/White)

To Tee on Return Port(Color Code Blue)

To "A" Port of Lift Section(Color Code Green)

To "B" Port ofLift Section(Color CodeGreen/White)

ITEM PART NO. DESCRIPTION QTY02964297 Complete Assembly

1 02960018* Elbow 32 02964296* Extension Arm Weldment (Heavy Duty) 13 02839000 Hose (ROPS Units) 1

02823600 Hose (Cab Units) 14 02957485* Hose With #4MJ 15 001774 Hose (ROPS Units) 1

02839000 Hose (Cab Units) 16 02880800* Pin 37 02961483* Cylinder 18 02963505* Cylinder, Pin (Greaseable) 19 02957535* Pin 111 02930200* Pin 112 00606000* Cotter Pin 1213 02957497* Linkage Arm Weldment 114 02880100* Cable Assembly 115 02880200* Shackle with Screw Pin 116 02822500* Flatwasher 1217 00750731* Bushing 118 02962181* Straight Adapter 119 02959925* Lug Bushing (1/2" Lug) 2

02963467 Spring Tension Bushing 220 10318000 Bolt 2-Ref21 00001800 Nut 2-Ref22 02959438 Pin, Attach. (Special for Flail Head Only) 1-Ref

02880700 Pin, Attach. (For Rotary Head) 1-Ref23 02961484* Cylinder 124 02959891 Bushing 125 00752670* Grease Fitting 826 02963467* Lug Bushing 627 02880700 Pin 128 02890900 Hose (ROPS) Units 1

02965475 Hose (Cabs Units) 129 0019800 Hose (ROPS Units) 1

001849 Hose (Cabs Units) 1* These parts are included in Extension Arm Assembly p/n 02964297

R 07-19-99


PAR

TS


512345

123412341234

1

2

3 467

16 17

1814

19

20

212223

15

13

13

10

119

13

10

1234

8

VERSA EXTENSION ARM

LIFT CYLINDER ASSEMBLY


1 02961484 1 Hydraulic Cylinder2 02962134 1 Gland3* -------- 1 “O” Ring4 02962133 1 Rod Assembly5 02962132 1 Barrel Assembly6 02962131 1 Piston7 02252400 1 Locknut8 02960018 2 Elbow9 02880800 1 Pin10 02822500 2 Washer11 02930200 1 Pin "D"13 00606000 4 Cotter Pin14* -------- 1 Back-Up Ring15 02962129 1 Collar16* -------- 1 Wear Ring17* -------- 1 Piston Seal18* -------- 1 “O” Ring19 02962169 1 Set Screw20 02962170 1 Nylon Insert21* -------- 1 Rod Wiper22* -------- 1 Rod Seal23* -------- 1 Buffer Seal* Included in Seal Kit P/N 02962135

1234512345123451234512345

13

1234512345

123456123456123456123456

8


PAR

TS


VERSA EXTENSION ARM


02961483A 1 Tilt Cylinder Assembly

1 02975303 1 Tube Weldment2 02975302 1 Cylinder Head3 02975305 1 Piston4 02975304 1 Rod Weldment10* ------------- 1 O-Ring11* ------------- 1 Seal, Hallite Rod13* ------------- 1 Seal, Wiper Rod14* ------------- 1 Seal, Piston Ring15* ------------- 1 Wear Ring25 5JRC16140 1 Nut, Hex40* ------------- 1 Seal

* Included in Seal Kit P/N 02975306

TILT CYLINDER ASSEMBLY


PAR

TS



1 02961046 1 Weldment2 02047400 2 Suction Filter3 02208800 4 Bolt4 02047200 1 Elbow5 63161900 4 Spring Nut6 02957223 1 Suction Pipe Weldment7 02208400 1 Elbow8 02411000 1 Hose Bib9 02957390 1 Filler Cap Weldment

10 02209600 1 Filler Cap 11 02962963 1 Sight Gauge 12 02963659 1 Magnetic Plug 13 02958079 1 Gasket-Rubber

02963661 1 Gasket-Cork 14 00749137 4 Nut 15 02961000 1 Filter Assembly

02961001 1 Filter ReplacementElement

16 02961052 1 Gasket-Rubber02963662 1 Gasket-Cork

17 02960809 1 Adapter 18 00002700 4 Flatwasher 19 63067100 6 Bolt 20 63121700 6 Nut 21 63121800 6 Lockwasher 22 02026200 1 Hose Clamp 23 02961681 1 Filter Return Tube 26 00752036 4 Nut 27 12621000 4 Bolt 28 02961255 4 Pushnut 29 02960871 1 Tube Clamp 30 02967127 1 "O" Ring 31 02962963 1 Dial Indicator

OIL RESERVOIR ASSEMBLY

1

2

4

3

* FILTER ASSEMBLY

Item Part No Qty Description

- 02961000 1 Filter Assy

1 02961001 1 Filter Element2 02972678 1 Spring Filter Cartridge3 02973782 1 Valve, Filter Bypass4 02978349 1 Filter Cover- 02978354 1 Seal Kit- 02978355 1 Nut & Bolt Kit

*


PAR

TS



1 02961038 1 Gasket2 02960562C 1 Housing3 02960561 1 Spindle4 02960558 1 Bearing Ring5 02960559 1 Seal6 00754627 1 Snap Ring7 02960557 1 Bearing8 00755628 1 Bearing9 02964269 1 Lockwasher10 02962030 1 Nut11 00755633 1 Plug12 02959018 1 Pressure Relief Plug13 00751731 1 Reducer

10 9 1

2

111213

4

5

6

7

8

P/N 02960553C

Note: For proper assembly, see Operator's Manual - Maintenance Section.

Fill with NLGI 000 GreaseAlamo Group P/N 00765444DO NOT OVERFILL

SPINDLE HOUSING AND SPINDLE ASSEMBLY

3

R 4-21-94


PAR

TS


VERSA MOWER HEAD ASSEMBLY

TORQUE ITEM 9 TO 400 FT/LBSTORQUE ITEMS 4 & 5 TO 100 FT/LBS

60" P/N 02961814 72" P/N 02961822

R 2-12-96


PAR

TS


60" P/N 02961814 72" P/N 02961822

VERSA MOWER HEAD ASSEMBLY

R 2-12-96

ITEM PART NO. DESCRIPTION QTY

1 02884100 Mower Head Weldment-60" Mower 1

02958262 Mower Head Weldment-72" Mower 1

2 02960553C Spindle Assembly 1

3 02969860 Motor & Spindle Assembly-60" Mower 1

02969861 Motor & Spindle Assembly-72" Mower 1

4 02892100 Bolt 6

5 02788400 Bolt 2

6 00001800 Locknut 4

7 00037200 Locknut 6

8 02954200 Blade Bar Assembly-60" Mower 1

02958575 Blade Bar Assembly-72" Mower 1

9 02782000 Bolt 4

10 02885600 Skid Shoe-60" Mower 2

02958663 Skid Shoe-72" Mower 2

11 00059700 Bolt 12

12 00011100 Flatwasher 56 - 60" OR 65- 72"

13 00015800 Nut, Toplock 31- 60" OR 36- 72"

14 02885700 Rear Flap-60" Mower (not shown) 1

02958260 Rear Flap-72" Mower (not shown) 1

15 02964570 Front Chain Guard Assembly 60" Mower 1

02959045 Front Chain Guard Assemblay 72" Mower 1

16 02959401 Spacer, Blade Bar 1

21 02961287 Hose (not shown) 60" Mower 1

22 02961288 Hose (not shown) 60 " Mower 1

24 00003500 Grease Fitting (not shown) 1

25 00003901 Lockwasher 4

26 02961301 Hose 72" Mower (not shown) 1

27 02961302 Hose 72" Mower (not shown) 1

28 02960951 Stud 2

29 02938400 Rear Chain Guard Assembly 60" Mower 1

02959046 Rear Chain Guard Assembly 72" Mower 1

30 02964697 Corner Chain Guard 3


PAR

TS


123412341234

121212

121212

121212

1

4

2

3

12341234123412341234

12341234

6

5

60" VERSA MOWER

60" VERSA MOWER HYDRAULIC MOTOR ASSEMBLY


1 02961747 1 Hydraulic Motor2 02961028 1 90 Deg. Elbow3 00749101 1 Split Flange Kit4 02827700 1 Flange Kit5 02961008 1 Reducer6 02889300 1 90 Deg. Elbow

R 2-12-96


PAR

TS


60" VERSA MOWER HYDRAULIC MOTOR


1 02962200 1 Snap Ring2*+ -------- 1 “O” Ring3 02962199 1 Seal Retainer4*+ -------- 2 Seal5 02962192 1 Mounting Flange

w/Bushings6 02961940 1 Plug7 02961931 2 Check Assemby8*+ -------- 4 Seal End9* -------- 2 Thrust Plate10 02962195 1 Gear Set11*+ -------- 2 Square Seal12 02962201 4 Dowel Pin13 02962194 1 Gear Housing14 02962193 1 Porting Flange

w/Bushing15 02962196 4 Washer16 02962197 4 Bolt17*+ -------- 4 Side Seal

(not shown)18 02962291 1 Seal Retainer

* included in seal kit p/n 02962202

+ Included in minor seal kit p/n 02962540

R 06-10-98

P/N 02961747

Parts Section 6-16VERSA\

PAR

TS




72" VERSA MOWER HYDRAULIC MOTOR ASSEMBLY

123451234512345

1212

121212

121212

1

4

2

3

123412341234

123123123

6

5

P/N 02969725

R 2-13-965-91


PAR

TS


72" VERSA MOWER HYDRAULIC MOTOR

R 2-13-965-91

* included in seal kit p/n 02962202

+ Included in minor seal kit p/n 02962540

P/N 02969725


1 02962200 1 Snap Ring2*+ -------- 1 “O” Ring3 02962199 1 Seal Retainer4*+ -------- 2 Seal5 02962192 1 Mounting Flange

w/Bushings6 02961940 1 Plug7 02961931 2 Check Assemby8*+ -------- 4 Seal End9* -------- 2 Thrust Plate10 02969863 1 Gear Set11*+ -------- 2 Square Seal12 02962201 4 Dowel Pin13 02969862 1 Gear Housing14 02962193 1 Porting Flange

w/Bushing15 02962196 4 Washer16 02969864 4 Bolt17*+ -------- 4 Side Seal

(not shown)18 02962199 1 Seal Retainer


PAR

TS


VERSA MOWER BLADE BAR & STUMP JUMPER PAN

121212123123

111123123

111123123

67

1

45

21212

3

DANGER:

60" P/N 02954200 72" P/N 02958575

1212

NOTE: Torque bolts (item #7) to400 ft.-lbs. Use Lock-tite onthreads. Torque bolts (item #5)to 250 ft.-lbs.

7

6

2

1 3

5

4

8

ITEM PART NO. QTY DESCRIPTION1 02960769 1 Stump Jumper Pan Weldment 60"

02960612 1 Stump Jumper Pan Weldment 72"2 02977557 2 Blades-Matched - 60"

00750787 2 Blades-Matched - 72"3 00752827 2 Blade Bolt4 00748000 2 Lockwasher5 00747900 2 Nut6 00003901 4 ref Lockwasher7 02886600 4 ref Bolt

72" P/N 02963382

STUMP JUMPER PANNote: This pan can be identified by it's welded supports.

R 05-11-01

NOTE: Torque bolts (item #7) to 400 ft.-lbs.Use Lock-tite on threads. Torque bolts (item#3) to 250 ft.-lbs.

Blades should always be replaced in sets. Blades of different weights can causeserious imbalance and damage to the machine and personnel. When replacingblades, BLADE BOLTS, BUSHINGS, NUTS, AND WASHERS MUST BE CHANGED.

BLADE BAR ASSEMBLYITEM PART NO. QTY DESCRIPTION1 00754093 1 Blade Bar - 60"

02958577 1 Blade Bar - 72"2 02977557 2 Blades-Matched - 60"3 00747900 2 Nut4 00748000 2 Lockwasher5 00752827 4 Bolt6 00003901 4 Lockwasher7 02886600 4 Bolt (Use w ithout spacer)

02782000 4 Bolt (Use with spacer)8 02959401 1 Spacer

5-91


PAR

TS


R 05-11-01

STUMP JUMPER PAN ASSEMBLY 60" MOWER

4-94

DISCONTINUEDFOR REPLACEMENT

PARTS ONLY

121212123123

1111123123

1111123123

67

1

45

23

NOTE: Torque bolts (item #7) to 400 ft.-lbs.Use Lock-tite on threads. Torque bolts (item#3) to 250 ft.-lbs.

Note: This pan can be identified by it's welded supports.


1 02960769 1 Stump Jumper Pan Weldment 60"

02960612 1 Stump Jumper Pan Weldment 72"

2 02977557 2 Blades-Matched - 60"

00750787 2 Blades-Matched - 72"

3 00752827 2 Blade Bolt

4 00748000 2 Lockwasher

5 00747900 2 Nut

6 00003901 4 ref Lockwasher

7 02886600 4 ref Bolt

P/N 02957075

121212

121212


PAR

TS


STUMP JUMPER SPIDER PAN ASSEMBLY 60" MOWER

DANGER:

DANGER:

Blades should always be replaced in sets. Blades of different weights can cause serious imbal-ance and damage to the machine and personnel. When replacing blades, BLADE BOLTS,BUSHINGS, NUTS, AND WASHERS MUST BE CHANGED.

68

7

9

56

5

4

1

15

14

1613 12

8

103

15

16

14

2

3

2

P/N 02964456*

NOTE: This pan can be identified as having bolt in bushings and no welding anywhere on the pan.

Roll pin #5 must be installed to prevent nut from becoming loose and blade from being thrown from themachine.

NOTE: Torque bolts (item #13) to 400 ft.-lbs. Use Lock-tite on threads. Torque bolts (item #6) to 250 ft.-lbs.


1 02964804** 1 Stump Jumper Pan2 02975903 1 Blades-Matched Set of 33 02964330 3 Blade Bolt4 00755623 3 Heat Treated Washer5 00023200 3 Spiral Roll Pin6 00020900 3 Nut7 02030300 3 Locknut8 00748547 6 Washer9 02964162 3 Spacer10 7A16824 3 Bolt12 00003901 4 ref Lockwasher13 02886600 4 ref Bolt (Used without spacer)

02782000 4 ref Bolt (Use with spacer)14 02964954 3 Key15 02964815 3 Bushing16 02965229 3 Spacer17 02959401 1 Spacer

* Includes Items 1-6 and 14-16** Includes items 7,8,9, & 10


PAR

TS


CONTROL VALVE, 2 SPOOL


02971283 - Control Valve Assy

1 02962249 3 Adapter Hyd. Elbow2 02967150 1 Adapter Hyd. Tee3 02967151 1 Adapter Hyd. Straight4 02968828 1 Plastic Tie (Red)5 02968830 1 Plastic Tie (Blue)6 02968831 1 Plastic Tie (Blue/White)7 02968832 1 Plastic Tie (Green)8 02968833 1 Plastic Tie (Green/White)9 02968834 1 Plastic Tie (Orange)10 02969131 1 Directional Control Valve11 63042700 2 Adapter Hyd. Straight12 02761100 1 Adapter Hyd. Elbow13 02969399 1 Orifice Plate


02971283 - Control Valve Assy

14 02972159 1 Adapter Hyd. Straight15 02971207 2 Kit, Valve Control Handle16 02973223 1 Main Relief17 02972795 1 Seal Kit, Main Relief18 02972792 1 Seal Kit, Outlet Section19 02972794 1 Seal Kit, Work Section20 02972793 1 Seal Kit, Work Section21 02979336 1 Inlet22 02979337 1 Dbl. Acting Float23 02979338 1 Singlt Acting Float24 02979339 1 Outlet Cover25 02979340 3 Stud Assembly

91

8

1

4

7

10

6

14

13

11

3

5

1

2

12

15

1819 20

1622

NOTE: Spool Seals areincluded in work sectionSpool Kits.

25

24

23

17

21


PAR

TS


VERSA MOWER HYDRAULIC SYSTEM

12-96 R 12-08-97


PAR

TS


VERSA MOWER HYDRAULIC SYSTEM

5-91 R 8-26-02


1 02827700 1 Flange Kit2 02961000 1 In Tank Filter

02961001 1 Filter Element3 02960809 1 Adapter4 02962214 1 Elbow6 02961825 2 Adapter7 02411000 2 Hose Bib8 02047200 1 Elbow

10 02960807 3 Adapter11 02889500 1 Adapter12 02969399 1 Orifice Plate13 02968828 1 Plastic Tie (Red)14 02972159 1 Straight Adapter15 02960018 3 Elbow19 02889700 1 Elbow - 45 deg.21 63042700 1 Adapter22 02512800 1 Hose-Tank to Pump23* ------------- 1 Hose-Pump to Cutter Valve24* ------------- 1 Hose-Pump to Control Valve25 02961148 1 Hose-Filter Tube to Tee26 02961288 1 Hose-Cutter Valve to Motor, 60" Versa Rotary

02961302 1 Hose-Cutter Valve to Motor, 72" Versa Rotary27 02961287 1 Hose-Motor to Cutter Valve, 60" Versa Rotary

02961301 1 Hose-Motor to Cutter Valve, 72" Versa Rotary28 02961148 1 Hose-Cutter Valve to Tee29 02963468 1 Hose-Control Valve to Cutter Valve (ROPS Units)

61026400 1 Hose-Control Valve to Cutter Valve (Cab Units)30 02839000 1 Hose-Control Valve to Tilt Cylinder (Cab Units)

001774 1 Hose-Control Valve to Tilt Cylinder (ROPS Umits)31 02890900 1 Hose-Control Valve to Lift Cylinder (ROPS Units)

02823600 1 Hose-Control Valve to Lift Cylinder (Cab Units)32 02026200 2 Hose Clamp33 02961681 1 Filter Return Tube35 02961003 2 Adapter36 02961028 1 Elbow37 00749101 1 Split Flange Kit38 02827700 1 Flange Kit39 02961008 1 Reducer40 02889300 1 Elbow41 02962249 1 Elbow42 02962181 1 Adapter43 02957485 1 Hose with #4MJ44 03200287 1 Hose (ROPS Units)

001849 1 Hose (Cab Units)45 02890900 1 Hose (ROPS Units)

02965475 1 Hose (Cab Units)46 63042700 1 Straight Adapter47 02761100 1 Elbow48 02967150 1 Tee49 02967151 1 Straight Adapter50 02968830 1 Plastic Tie (Blue)51 02968831 1 Plastic Tie (Blue/ White)52 02968832 1 Plastic Tie (Green)53 02968833 1 Plastic Tie (Green/White)54 02968834 1 Plastic Tie (Orange)

* Varies per Tractor Mount; See Specific Tractor Mount Installation Drawing


PAR

TS


89

10

6

11

12

11

8

9

12

1

2

3

7

4

5

FRONT MOUNTED - P/N 02961474

SINGLE PUMP REPLACEMENT PARTS

5-91


PAR

TS





1 02961918 4 Bolt

2 02961917 4 Washer

3 02961914 1 Porting Flange w/Bushing

4* -------------- 2 Seal

5 02961913 1 Mounting Flange w/Bushings

6 02961920 1 Plug

7 02961915 1 Gear Housing

8* -------------- 4 Seal End

9* -------------- 2 Thrust Plate

10 02961916 1 Gear Set

11* -------------- 2 Square Seal

12 02961924 4 Dowel Pin

* included in major rebuild seal kit part number 02961925**

** minor rebuild seal kit is 02962548 (includes all parts of

major rebuild seal kit except thrust plates)

5-91


PAR

TS


123451234512345

1

3

123456123456123456123456123456

1234512345

123123123

121212

123123

4

5

2

111

SINGLE PUMP ASSEMBLY


1 02961474 1 Hydraulic Pump2 02961825 1 90 Deg. Elbow3 02827700 1 Flange Kit4 02411000 1 Hose Bib5 02026200 1 Hose Clamp

FRONT MOUNTED P/N 02961827

5-91


PAR

TS


123451234512345

121212

1

3

123123

123123

2

1212

123123123

12345123451234512345

121212125

6

4

SINGLE PUMP ASSEMBLY


1 02964947 1 Hydraulic Pump2 02961098 1 90 Deg. Elbow3 02827700 1 Flange Kit4 02411000 1 Hose Bib5 02026200 1 Hose Clamp6 02047200 1 Elbow

REAR MOUNTED - 540 PTO - P/N 02962096

R 03-12-925-91


PAR

TS



89

10

6

12

8

9

12

1

2

3

7

4

5

11


R 3-12-925-91

11


PAR

TS



1 02961918 4 Bolt

2 02961917 4 Washer


4* -------- 2 Seal


6 02961920 1 Plug


8* -------- 4 Seal End

9* -------- 2 Thrust Plate

10 02965091 1 Gear Set

11* -------- 2 Square Seal

12 02961924 4 Dowel Pin


** minor rebuild seal kit is 02962548

(includes all parts of major rebuild seal kit except thrust plates)



5-91 R 3-12-92


PAR

TS


8

13

17

1

5

6

7

8

8

8

11

12

13

13

15

16

13

2

3

3

4

6

4

4

4

9

14

6

6 10

TANDEM PUMP REPLACEMENT PARTS


5-91


PAR

TS





1* -------------- 1 Seal


3 02961920 2 Plug

4* -------- 4 Seal End

5 02962187 1 Gear Set

6 02961924 8 Dowel Pin


8* -------- 4 Square Seal

9 02962185 1 Bearing Carrier Housing w/Bushings

10 02962188 1 Gear Set

11 02962216 1 Connector Shaft


13* ------------- 4 Thrust Plate

14 02962184 1 End Flange w/Bushing

15 02961917 4 Washer

16 02962189 4 Studs

17 02962190 4 Nuts




5-91


PAR

TS


TANDEM PUMP ASSEMBLY

123412341234

1


1 02961735 1 Hydraulic Pump2 02961825 1 45 Deg. Elbow3 02962214 1 45 Deg. Elbow4 02827700 1 Flange Kit5 02411000 1 Hose Bib6 02026200 1 Hose Clamp

1212

1212

121212

123456123456123456123456123456

1234512345

123123123

6

4

5


3TOP PORT

2BOTTOM PORT

5-91 R 1-29-99

1212

123123


PAR

TS


TANDEM PUMP ASSEMBLY*

123412341234

1


1 02962440 1 Hydraulic Pump2 02961317 1 45 Deg. Elbow3 02962749 1 45 Deg. Elbow4 02827700 1 Flange Kit5 02411000 1 Hose Bib6 02026200 1 Hose Clamp7 00749103 1 Flange Kit8 63042700 1 Straight Adapter

1212

1212

111

123451234512345123451234512345

12345

123123123

6

4

5

7*8

2BOTTOM

3TOP

*This pump is identified by the1-1/4" Flange fitting used onthe bottom discharge port.


5-91


PAR

TS


4

4

8

13

17

1

2

3

3

4

4

5

6

6

7

8

8

8

9

10

12

13

13

14

6

15

16

11

6

A

A

* This pump is identified by the 1-1/4"Flange connection used on the bottomdischarge port.

TANDEM PUMP REPLACEMENT PARTS*


View A-A

5-91


PAR

TS



1* -------------- 1 Seal


3 02961920 2 Plug

4* -------- 4 Seal End

5 02962620 1 Gear Set

6 02961924 8 Dowel Pin




10 02962623 1 Gear Set



13* ------------- 4 Thrust Plate


15 02961917 4 Washer

16 02962189 4 Studs

17 02962190 4 Nuts


** minor rebuild seal kit is 02966198




5-91 R 4-22-94

Parts Section 6-36

PAR

TS

VERSA/5-91


14


4

4

8

13

17

2

3

3

4

4

5

6

6

7

8

8

8

9

10

12

13

13

6

15

16

11

6

1

TANDEM PUMP REPAIR PARTS

R 03-12-92

Parts Section 6-37

PAR

TS

VERSA/5-91




1* -------------- 1 Seal


3 02961920 2 Plug

4* -------- 4 Seal End

5 02965091 1 Gear Set

6 02961924 8 Dowel Pin




10 02962188 1 Gear Set



13* ------------- 4 Thrust Plate


15 02961917 4 Washer

16 02962189 4 Studs

17 02962190 4 Nuts


** minor rebuild seal kit part number 02962539


TANDEM PUMP REPAIR PARTS

R 03-12-92

Parts Section 6-38

PAR

TS

VERSA/5-91


1234123412341234

1


1 02964948 1 Hydraulic Pump2 02961098 1 90 Deg. Elbow3 02962213 1 90 Deg. Elbow4 02827700 1 Flange Kit5 02411000 1 Hose Bib6 02026200 1 Hose Clamp7 02047200 1 Elbow

1212

1212

1212

123123

1212

123123

4

1212

123456123456123456123456123456

123123123

12121212121212

6

121212

57

3BOTTOMPORT

2


TANDEM PUMP ASSEMBLY

R 03-25-92

Parts Section 6-39

PAR

TS

VERSA 04/03


SPEED INCREASER

ITEM PART NO QTY DESCRIPTION


1 00754519 1 Housing2 00754520 1 Gasket3 00754521 1 Gasket4 00754522 1 Flange5 00754523 1 Plug6 00754524 4 Gasket7 00754525 3 Plug8 00754526 3 Lockwasher9 00754527 8 Bolt10 00754528 10 Lockwasher11 00754529 10 Bolt12 00754530 2 Dowel13 00754531 1 Housing14 00754332 1 Gasket15 00754533 1 Flange16 00754534 1 Gasket17 00754535 1 Dipstick18 00754536 5 Gasket19 00754537 4 Plug20 00754538 2 Seal21 00754539 1 Bearing22 00754540 1 Retaining Ring23 00754541 3 Bearing24 00754542 1 Shaft25 00754543 2 Key26 00754544 1 Gear (540 RPM)

00756532 1 Gear (1000 RPM)27 00754545 1 Pinion (540 RPM)

00756531 1 Pinion (1000 RPM)28 00754546 1 Spacer29 00754950 1 Pump Flange30 02966731 Ref. Splined Pump Adapter

Parts Section 6-40

PAR

TS

VERSA/5-91


SPEED INCREASER P/N 02897900

ITEM PART NO. QTY DESCRIPTION1 02922700 1 Adapter, Shaft2 00751531 1 Pinion Gear - High Speed5 00752179 1 Shaft & Gear, Low Speed6 02922600 1 Pump Flange7 00751949 1 Cover, Closed8 00751950 2 Cover, Open9 00751970 8 Pipe Plug10 00751535 3 Seal11 00751954 1 Retaining Ring12 00751942 1 Breather13 00757533 1 Bearing Cup14 00751533 1 Bearing Cone15 00749201 3 Bearing Cup16 00749200 3 Bearing Cone17 00751953 1 Spacer Ring18 00751955 1 Housing19 00751956 1 Housing20 00751957 2 Dowel21 00751958 1 Gasket (.015)22 00751971 2 Spacer Ring23 ------------- ref Name Tag24 00751959 AR Shim (.005 Alum.)25 00751960 AR Shim (.007 Alum.)26 00751961 AR Shim (.020 Alum.)28 00751963 AR Shim (.005 Alum.)30 00751965 AR Shim (.007 Alum.)31 00751966 AR Shim (.020 Alum.)32 00751967 24 Screw33 00751968 24 Lockwasher34 00751969 8 Screw35 00013901 8 Nut36 00012101 8 Lockwasher

R 4-22-94

Parts Section 6-41

PAR

TS

VERSA/5-91



1 00748670 1 Tube, Tailwheel2 02711800 3 Bolt4 02208000 7 Locaknut5 00749264 1 Collar6 00749413 1 Bolt7 00749017 1 Nut8 00749271 1 Caster Fork9 00156503 1 Bolt10 00752272 2 Bearing Spacer11 02817100 2 Bearing Assy (cup & cone)12 00013600 2 Seal13 00756750 1 Tire w/Rim, Hub & Cups14 00695100 1 Nut

*00130010 Tire & Wheel Assembly (includes Items 11, 12 & 13)

R 4-22-94

VERSA MOWER TRAIL WHEEL

Parts Section 6-42

PAR

TS

VERSA/5-91


VERSA MOWER CHAIN GUARDS

R 02-10-99


1 02964571 1 Chain GuardWeldment 60"

02964839 1 Chain Guard Weldment 72"

2 00023100 6*Ref Bolt3 00011100 6*Ref Flatwasher4 00015800 6*Ref Nut5 00992000 1 Cable6 00223900 53 Chain (8 Link) 60"

65 Chain (8 Link) 72"7 00001000 2 Clamp, Cable 3/16"8 02964697 1 Chain Guard

Weldment 60"

* Add (1) for 72" Mower

FRONT60" Assy P/N 0296457072" Assy P/N 02959045

REAR60" Assy P/N 0293840072" Assy P/N 02959046


1 02939700 1 Chain GuardWeldment 60"

02959044 1 Chain GuardWeldment 72"

2 00023100 6*Ref Bolt3 00011100 6*Ref Flatwasher4 00015800 6*Ref Nut5 00992000 1 Cable6 00750900 53 Chain (6 Link) 60"

65 Chain (6 Link) 72"7 00001000 2 Clamp, Cable 3/16"8 02964697 2 Chain Guard

Weldment 60"/72"


SINGLE CHAIN

DUAL CHAIN

REAR60" Assy P/N 0296231072" Assy P/N 02972428


1 02962308 1 60" DoubleChain Guard

02972431 1 72" DoubleChain Guard

2 00750203 2 Cable3 00001000 4 Cable Clamp4 00750900 71 Chain (6 Link) 60"

83 Chain (6 Link) 72"5 00326700 4 Clip (Not Shown)6 02964697 2 Chain Guard7 00023100 6*Ref Bolt8 00011100 6*Ref Flatwasher9 00015800 6*Ref Locknut


FRONT60" Assy P/N 0296230972" Assy P/N 02972427


1 02962307 1 60" Chain GuardWeldment

02972429 1 72" Chain GuardWeldment

2 00750203 2 Cable3 00001000 4 Cable Clamp4 00223900 71 Chain (8 Link) 60"

83 Chain (8 Link) 72"5 00326700 4 Clip (Not Shown)6 02964697 2 Chain Guard7 00023100 6*Ref Bolt8 00011100 6*Ref Flatwasher9 00015800 6*Ref Locknut


Parts Section 6-43

PAR

TS

VERSA 01/2002


VERSA DITCHER ASSEMBLY

Torque item #4 to 300 ft.-lbs.

Torque item #8 to 100 ft.-lbs.


1 02871100 1 Arm2 02872300 1 Spindle Assembly3 02873900 1 Blade Housing Assembly4 02880900 8 Bolt6 00037200 8 Lock Nut7 02875301 1 Blade Head Assembly Standard

02898501 1 Blade Head Assembly Reverse8 02891800 6 Bolt10 02978110 1 Motor11 02889300 1 Elbow12 02961099 1 Hose13 02961356 1 Hose14 02883800 1 Hose Clamp15 00001800 1 Lock Nut16 02963531 4 Bolt18 02958920 1 Elbow19 02978111 2 Adp. Hyd. Straight

19

Parts Section 6-44

PAR

TS

VERSA 01/2002


SPINDLE ASSEMBLY



1 02883700 1 Spindle Housing w/Bearing Cups & Grease Fitting2&3 02778200 2 Bearing Cone and Cup4 02707600 3 Seal5 02872701 1 Spindle6 02873200 1 Spacer7 02870900 1 Nut8 00003500 1 Grease Fitting9 02873301 1 Coupling Half, Spindle10 02959017 1 Key11 02973318 1 Coupling Half, Motor12 02873800 1 Chain, Coupling13 02959014 1 Set Screw14 02959018 1 Relief Fitting

Parts Section 6-45

PAR

TS

VERSA/5-91


BLADE HOUSING



1 02874000 1 Housing Weldment2 02874601 1 Deflector Weldment3 02875001 1 Hinge Pin4 00002700 2 Flatwasher5 00026200 2 Cotter Pin6 02875101 1 Back-Up Plate Weldment7 02886900 4 Bolt9 00001800 14 Locknut10 02811000 1 Cylinder11 02276700 2 Pin, Cylinder12 37107B13 4 Hair Pin Clip13 02959086 3 Rubber Flap Deflector14 02959087 3 Clamp Bar Flap Deflector15 02961677 11 Bolt16 00023100 1 Bolt17 00059700 2 Flat Socket Cap Screw20 02959089 1 Weldment Cover Housing21 00011100 3 Flatwasher

R 2-16-96

1

23

5

4

6

7,9

9,17,2111

121011

12

13

14

1320

9,15

9,15

9,16,21

Parts Section 6-46

PAR

TS

VERSA/5-91


DEFLECTOR CYLINDER

P/N 02956704*


1 02811000 1 Hydraulic Cylinder2 02840700 1 Gland3 ------------ 1 Lockwire (See Seal Kit)4 02840800 1 Rod Assembly5 02840900 1 Barrel Assembly6 02841000 1 Piston7 02841100 1 Locknut8 02042500 2 Straight Adapter9 02276700 2 Cylinder Pin10 02276800 4 Cotter Pin

SEAL REPAIR KIT P/N 02840600 CONSISTS OF:1 - Gland Static Seal1 - Rod Seal1 - Piston Seal2 - Back up Rings1 - Rod Wiper1 - Rod Static Seal1 - Back-up Rod1 - Lockwire

* Includes items 1 through 8 only

R 4-22-94

Parts Section 6-47

PAR

TS

VERSA/5-91


BLADE HEAD ASSY



1 02875400 1 Blade Head Weldment Standard02898400 1 Blade Head Weldment Reverse

2 02875900 3 Wear Plate4 00001800 18 Locknut3 02886900 6 Bolt6 02958680 3 Mount Bracket Standard

02958681 3 Mount Bracket Reverse7 02958675 3 Blade - Rough Cut

02958685 - Shim Kit for Rough Cut Blades8 02891800 12 Bolt9 02958684 6 Bolt10 00003901 6 Lockwasher11 00037200 6 Nut

R 2-16-96

4,

,4

Parts Section 6-48

PAR

TS

VERSA 01/2002


HYD. PUMP12121212

132 7

6

4

22

23

8

7

32 10

1015

15

M 1

M 2

28

15

31

HYD. TANK

3

FILTER

11

CUTTERVALVE

LIFT CYL.

26

27

2533

3

13

16

29

12

DEFLECTOR CYL.15

151514

42

41

42

41

VERSA DITCHER HYDRAULIC SYSTEM

21

19

HYDRAULICMOTOR

36

36

30

TILT CYL.

15

41

CONTROLVALVE

24

45

43

44

46

47

48

48

Parts Section 6-49

PAR

TS

VERSA 01/2002


VERSA DITCHER HYDRAULIC SYSTEM



02961001 1 Filter Element3 02960809 1 Adapter4 02962214 1 Elbow6 02961825 2 Adapter7 02411000 2 Hose Bib8 02047200 1 Elbow

10 02960807 3 Adapter11 02154700 1 Adapter12 02049100 1 Elbow13 00749508 2 Plug14 02811300 1 Check Plug15 02960018 5 Elbow16 02962181 1 St. Adapter19 02889700 1 Pipe Tee21 63042700 1 Adapter22 02512800 1 Hose-Tank to Pump23* ------------- 1 Hose-Pump to Cutter Valve24* ------------- 1 Hose-Pump to Control Valve25 02961148 1 Hose-Filter Tube to Tee26 02961356 1 Hose-Cutter Valve to Motor, Return27 02961099 1 Hose-Motor to Cutter Valve, Pressure28 02961148 1 Hose-Cutter Valve to Tee29 02949500 1 Hose-Control Valve to Tee30 001774 1 Hose-Control Valve to TIlt Cylinder (ROPS Units)

02823900 1 Hose-Control Valve to Tilt Cylinder (Cab Units)31 02839000 1 Hose-Control Valve to Lift Cylinder (ROPS Units)

02823600 1 Hose-Control Valve to Lift Cylinder (Cabs Units)32 02026200 2 Hose Clamp33 02961681 1 Filter Return Tube35 02961003 2 Adapter36 02958920 2 Elbow41 02042500 2 Straight Adapter42 02891100 2 Hose-Control Valve to Deflector Cyl.43 02967150 2 Tee44 02967151 2 St Adapter45 03200287 1 Hose (ROPS Units)

001849 1 Hose (Cab Units)46 02890900 1 Hose (ROPS Units)

02965745 1 Hose (Cab Units)47 02957485 1 Hose with #4 MJ48 02978111 2 Adp. Hyd. Straitht* Varies with tractor. Refer to your installation drawing.

R 8-26-02

Parts Section 6-50

PAR

TS

VERSA 01/2002


VERSA BOOM DITCHER HYDRAULIC SYSTEM

DEFLECTORCYL.

LIFT CYL.HYD. PUMP

M 1

M 2

121212

8-PLACES

3029 31

1 4

6

7

8

10

11

16

17

18

19

20

21

22

2324

25

26 26

27

34

34

20

21

HYD. TANK

FILTER10

CUTTERVALVE

1415 33

3

2

39

CONTROLVALVE

41 42

92328

35

PRESSURE

RETURN

32

HYD. MOTOR

7

33 43 43

Parts Section 6-51

PAR

TS

VERSA 01/2002



1 02827700 1 Flange Kit

2 02961681 1 Tube-Hose to Return Filter

3 02960809 1 Adapter Straight

4 02962314 1 Elbow-90 deg.

6 02961825 2 Adapter

7 02411000 2 Hose Bib

8 02047200 1 Elbow-90 deg.

10 02960807 3 Adapter-Straight

11 02905200 1 Hose-Control Valve to Deflector Cylinder

14 02961000 1 Filter

15 02961001 1 Filter Replacement Element

16 63042700 2 Adapter-Straight

17 02960983 1 Tube-Lift Section Bottom

18 02962249 8 Elbow-90 deg.

19 02905100 1 Hose-Control Valve to Lift Cylinder

20 02960018 2 Elbow-90 deg.

21 02026200 2 Hose Clamp

22 02905000 1 Hose-Control Valve to Lift Cylinder

23 02961054 2 Hose-Tube to Cutter Valve


25 02905300 1 Hose-Control Valve to Deflector Cylinder

26 02958920 2 Elbow

27 02960984 1 Tube-Lift Section Top

28 63042700 1 Adapter

29 02512800 1 Hose-Reservoir Tank to Pump

30 02961094 1 Hose-Pump to Cutter Valve

31 02513000 1 Hose-Pump to Control Valve

32 02963468 1 Hose-Control Valve to Tee

33 02961148 1 Hose-Cutter Valve to Tee

34 02961054 2 Hose-Tube to Hydraulic Motor

39 02889700 1 45 Degree Elbow

41 02962022 1 Elbow-90 deg.


43 02978111 2 Adp. Hyd. Straight

VERSA BOOM DITCHER HYDRAULIC SYSTEM

Parts Section 6-52

PAR

TS

VERSA/5-91


NOTES

Parts Section 6-53

PAR

TS

VERSA 04/03


DITCHER HYDRAULIC MOTOR P/N 02978110


- 02978110 - Ditcher Motor

1 02978358 1 Body2 02978259 1 Flange3 02978360 1 Drive Gear4 02978361 1 Idler Gear5 02978362 1 Pressure Plate6 02978363 1 Pressure Plate7 + 4 Sealing Strip8 + 4 Back Up Ring10 + * 1 O-Ring11 + * 1 Seal


- 02978110 - Ditcher Motor

12 + * 1 Snap Ring13 02978364 2 Retainer Chk Valve14 02978365 2 Ball15 02978366 2 Ball16 02976387 8 Capscrew17 02978371 8 Washer18 02978367 1 Plug19 + 1 O-Ring20 02978368 2 Dowels

* Consist of Shaft Seal Kit Part No. 02978369+ Consist of Seal Kit Part No. 02978370

1716

6

75

15 10 20

18

714

12 11

8

2

3

4

151

19

13

Parts Section 6-54

PAR

TS

VERSA/5-91


DITCHER ASSEMBLY


1 02958917 1 Ditcher Mount2 02958929 2 Ditcher Pin3 00749185 2 Washer4 02872300 1 Spindle Assembly5 02873900 1 Blade Housing Assembly8 00037200 7 Locknut9 02875301 1 Blade Head Assembly10 02891800 6 Bolt11 00001300 6 Lockwasher12 02870100 1 Motor13 02880900 8 Bolt14 00610600 2 Roll Pin15 02961054 2 Hose16 02958920 2 Elbow17 02957333 1 Swing Bar Weldment

Note: Swingbar weldment replaces swing cylinder whenDitcher is attached to boom.

R 2-12-98

17

Parts Section 6-55

PAR

TS

VERSA/12-96


VERSA DITCHER CONTROL VALVE


1 02870200 1 Control Valve 3 Spool2 00751358 3 Spring Repair Kit3 00751140 ref H.P. Relief Valve Kit4 00751142 ref Handle Assembly Kit5 02154700 1 Straight Adapter6 02049100 1 Elbow7 7329 1 Ristrictor8 02822100 4 Elbow9 00749508 2 Plug10 00751974 1 Spool Repair Kit11 02967150 2 Tee12 02967151 2 Straight Adapter

12

11

To Rod end ofTilt Cylinder

To Butt end ofLift Cylinder

To DeflectorCylinder

To Rod end ofTilt Cylinder

To Butt end ofLift Cylinder

R 12-18-97

Parts Section 6-56

PAR

TS

VERSA/5-91


HYD.PUMP 123

123123123 6

4

22

23

8

7

2

TILT CYL.DIPPER CYL.

26

30

13

13

12

1116 27

45

41

4338

41

41

41

38

45

33

19

3

37

CONTROL VALVE

M 1

17' VERSA BOOM HYDRAULIC SYSTEM

PRESSURE

RETURN

29

5

28

35

11

1

13

50

327

13

31

36

10

24

1040

32

46

47

48 49

47

46

4849

SWING CYL. LIFT CYL.

( 8 -PLACES )

CUTTERVALVE

HYDRAULICMOTOR

HYD.TANK

FILTER

28

R 08-24-99

Parts Section 6-57

PAR

TS

VERSA/5-91




02961001 1 Filter Elements3 02960809 1 Adapter4 02962214 1 Elbow5 63042700 1 Adapter6 02961825 2 Adapter7 02411000 2 Hose Bib8 02047200 1 Elbow10 02960807 3 Adapter11 02839000 1 Hose-Control Valve to Swing Cylinder12 02905100 1 Hose-Control Valve to Lift Cylinder13 02960018 8 Elbow - 90 Degrees16 02905000 1 Hose-Control Valve to Lift Cylinder19 02889700 1 Elbow 45 degrees22 02512800 1 Hose-Tank to Pump23 02961096 1 Hose-Pump to Cutter Valve24 02513000 1 Hose-Pump to Control Valve26 02959199 1 Hose-Control Valve to Dipper Cyl.27 02959198 1 Hose-Control Valve to Tilt Cylinder28 02961148 2 Hose-Cutter Valve to Tee29 02963468 1 Hose-Control Valve to Cutter Valve30 02959200 1 Hose-Control Valve to Dipper Cyl.31 02962023 1 Hose-Control Valve to Tilt Cylinder32 02026200 2 Hose Clamp33 02961681 1 Filter Return Tube35 02961003 1 Adapter36 02962249 8 Elbow - 90 Degrees37 63042700 2 Adapter - Straight38 02961327 2 Hose-Cutter Valve to Bulkhead40 02961070 1 Tube - Lift Section, Lower41 02961520 2 Hose - Tube to Tube43 02961072 1 Tube - Lift Section, Upper45 02961130 2 Tube46 02961057 2 Hose-Motor to Bulkhead (Rotary)

02961074 2 Hose-Motor to Bulkhead (Flail)02961058 1 Hose-Motor to Bulkhead (Flail Axe)02961059 1 Hose-Motor to Bulkhead (Flail Axe)

47 02960406 2 Elbow - Bulkhead48 00749101 2 Split Flange Kit49 02962774 2 Adapter50 02960411 2 Elbow-45 Degree

17' VERSA BOOM HYDRAULIC SYSTEM

R 2-18-96

Parts Section 6-58

PAR

TS

VERSA/8-94


17' ARTICULATED ARM ASSEMBLY

32

29

48

33

60

58

26

20

57

62

18

123123123

61

2423 54

10

41

56

45 49 53

28

46

25

21

31

27

27

9

21 4

53

47

19

7 38 50

9 37

17

1 2 4 35 4322

9

44

14 35

63 64

24

30

16

12

138 34 63

39

65

65

1 2 4 9 10 35 42 44

59 6015

11 13 40 51 52

R 2-16-96

Parts Section 6-59

PAR

TS

VERSA/8-94


17' ARTICULATED ARM ASSEMBLY

R 2-16-96


1 00007000 3 Bolt2 00011100 3 Flatwasher4 00015800 3 Locknut6 00037200 1 Locknut7 00606000 1 Cotter Pin8 00748000 1 Lockwasher9 00749946 1 Washer10 02030300 1 Locknut11 02957089 1 Lockwasher12 02906300 1 Sleeving13 02921700 1 Nut14 02956972 1 Bolt15 02957501 1 Bushing16 02957969 2 Grommet17 02958716T 1 Linkage Arm Assembly w/02966792 Teflon Bearings

02958716C 1 Linkage Arm Assembly w/02958357 Connex Bearings18 02959084 1 Cylinder Guard Assembly19 02959198 1 Hose20 02959199 1 Hose21 02959200 1 Hose22 02960406 2 Elbow23 02960411 2 Elbow24 02960869 2 Tube Clamp25 02961070 1 Tube - Lower26 02961072 1 Tube - Upper27 02961085 1 Sleeving28 02961103 2 Adapter29 02961129 1 17' Dipper Section Weldment30 02961130 2 Tube - Dipper31 02961132 1 17' Lift Section Weldment32 02961520 2 Hose33 02962023 1 Hose34 02965538 1 Main Pin35 02960650 4 Bearing37 02966756 1 Pin - Cylinder38 02966757 1 Pin - Linkage Arm39 02958591 1 Pin - Dipper40 02960841 2 Bearing41 02966935 1 Pin - Tilt Cylinder42 00749980 1 Pin - Dipper Cylinder43 02966964 1 Pin44 02967008 3 Spacer45 02967013 1 Pin46 02967016 1 Tilt Cylinder Assembly47 02967017 1 Dipper Cylinder Assembly48 02967021 1 Linkage Arm49 02967246 1 Set Screw50 03100099 1 Washer51 02966443 1 Bushing52 02960842 2 Bushing53 02965214 2 Bearing54 02044900 4 Bolt55 02966790 1 Bearing56 02962297 1 Lift Cylinder Assembly57 02905100 1 Hose58 * 1 King Post (See Page 6-85 & 6-86)59 00750479 1 Bolt60 02030300 2 Nut61 02961327 2 Hose62 02905000 1 Hose63 * 1 Bushing (See Page 6-85 & 6-86)64 00755076 1 Bolt65 02959891 2 Bushing

Parts Section 6-60

PAR

TS

VERSA/8-94


20' & 23' ARTICULATED ARM

16

13

38

36

33

37

21

34

60

17

23

50

16

16

17

2014

39

17

32

31

29

1 2 9 40 41

18

12 14 42

62

11 19 43

64

421412

1 2 9 40

22

15 48

3 4 6

364

584710

12 46

3 5 6 52 53

28

8

67

68

56

55

26

30

41 69

27

70

44

44

71

49 63

35

35

54

14 44 51 53 66

6559 72

R 01-17-96

61

Parts Section 6-61

PAR

TS

VERSA/8-94


20' & 23' ARTICULATED ARM

R 7-15-96

ITEM PART NO. QTY DESCRIPTION20' BOOM 23' BOOM

1 00001800 00001800 3 Locknut2 00002700 00002700 5 Flatwasher3 00007000 00007000 3 Bolt4 00011100 00011100 3 Flatwasher6 00015800 00015800 3 Locknut8 00037200 00037200 1 Locknut9 00605600 00605600 3 Bolt10 00606000 00606000 1 Cotter Pin11 00748000 00748000 1 Lockwasher12 00749946 00749946 4 Washer13 00751838 00751838 1 Sleeving14 02030300 02030300 3 Nut15 02957089 02957089 1 Lockwasher16 02905200 02905300 1 Hose17 02095300 02956911 1 Hose18 02906300 02906300 1 Sleeving19 02921700 02921700 1 Nut20 02956972 02956972 1 Bolt21 02957468 02957467 2 Hose22 02957969 02957969 2 Grommet23 02958716T 02958716T 1 Linkage Arm Assembly24 02959066 02959177 1 Hose25 02959067 02959178 1 Hose26 02959084 02959084 1 Cylinder Guard Assembly27 02959225 02959225 1 Bushing28 02960406 02960406 2 Elbow29 02960838 02961082 1 Large Boom Weldment30 02960869 02960869 1 Tube Clamp31 02960984 02960982 1 Tube - Lower32 02960985 02960983 1 Tube - Upper33 02960987 02960991 1 Tube - Dipper Section34 02960988 02960992 1 Tube - Dipper Section35 02961054 02961327 4 Hose36 02961067 02961067 1 Cover - Hydraulic Tubing37 02961081 02961084 1 20' Dipper Section Weldment38 02961085 02961085 1 Sleeving39 02961780 02961780 1 Dipper Cylinder Assembly40 02963154 02963154 3 Clamp41 02963323 02963323 3 Bracket - Top42 00750479 00750479 2 Bolt43 02965538 02965538 1 Main Pin44 02965548 02965548 4 Bearing46 02966756 02966756 1 Pin - Cylinder47 02966757 02966757 1 Pin - Linkage Arm48 02958591 02958591 1 Pin - Dipper49 02960841 02960841 2 Bearing50 02966935 02966935 1 Pin - Tilt Cylinder51 00748980 00748980 1 Pin - Dipper Cylinder52 02966964 02966964 1 Pin53 02967008 02967008 3 Spacer54 02967013 02967013 1 Pin55 02967016 02967016 1 Tilt Cylinder Assembly56 02967021 02967021 1 Linkage Arm58 03100099 03100099 1 Washer59 02960842 02960842 2 Bushing60 02905100 02905100 1 Hose61 02905000 02905000 1 Hose62 * * 1 King Post (See Page 6-6 & 6-7)63 * * 1 Main Pin Bushing (See Page 6-6 & 6-7)64 02961779 02961779 1 Lift Cylinder Assembly65 02921700 02921700 1 Jamnut66 02960650 02960650 4 Bushing67 02966792 02966792 2 Bushing68 00752405 00752405 1 Bolt69 02965214 02965214 2 Bushing70 02966792 02966792 2 Bushing71 02959891 02959891 2 Bushing72 02966443 02966443 1 Bushing

20' P/N 02961820 23' P/N 02961823

Parts Section 6-62

PAR

TS

VERSA/5-91


20' & 23' VERSA BOOM HYDRAULIC SYSTEM

R 2-18-96

TILT CYL.DIPPER CYL.

SWING CYL. LIFT CYL.HYD. PUMP

CUTTERVALVE

HYD. MOTOR

M 1

M 2

6

8

10

11

17

18

22

23 23

10

2627

40

36

34

34

43

29 30 31

3942

37

38

38 35

25

121212

8PLACES

4

CONTROLVALVE

40

27

FILTER

3

RETURN

PRESSURE

28

32

HYD. TANK

21

33

26

24

33

41

721

19

19

19

19

44

1

16

7

13

5

12

Parts Section 6-63

PAR

TS

VERSA/5-91


ITEM PART NO. QTY DESCRIPTION20’BOOM 23’BOOM

1 02827700 02827700 1 Flange Kit3 02960809 02960809 1 Adapter Straight4 02962214 02962214 1 Elbow-90 deg.5 02962404 02962404 1 Return Tube Straight Adapter6 02961825 02961825 1 Adapter7 02411000 02411000 2 Hose Bib8 02047200 02047200 1 Elbow-90 deg.10 02960807 02960807 3 Adapter-Straight11 02960988 02960992 1 Tube-Dipper12 02961681 02961681 1 Filter Return Tube13 63042700 63042700 1 Elbow-90 deg.14 02961000 02961000 1 Filter15 02961001 02961001 1 Filter Replacement Element16 63042700 63042700 2 Adapter-Straight17 02960985 02960983 1 Tube-Lift Section Bottom18 02962249 02962249 8 Elbow-90 deg.19 02960018 02960018 8 Elbow-90 deg.21 02026200 02026200 2 Hose Clamp22 02957468 02957468 2 Hose-Control Valve to Hose23 02960406 02960406 2 Elbow-Bulkhead24 02961003 02961003 1 Adapter Straight25 02905300 02956911 1 Hose-Control Valve to Dipper Cylinder26 00749101 00749101 2 Spilt Flange Kit27 02962774 02962774 2 Elbow28 02889700 02889700 1 Elbow 45 degrees29 02512800 02512800 1 Hose-Reservoir Tank to Pump30 02961096 02961096 1 Hose-Pump to Cutter Valve31 02513000 02513000 1 Hose-Pump to ControlValve32 02963468 02963468 1 Hose-Control Valve to Cutter Valve33 02961148 02961148 2 Hose34 02961054 02961054 2 Hose-Tube to Tube35 02960984 02960982 1 Tube-Lift Section Top36 02960987 02960991 1 Tube-Dipper Rear37 02959067 02959178 1 Hose-Hose to Tilt Cylinder38 02961327 02961327 2 Hose-Tube to Cutter Valve39 02959066 02959177 1 Hose-Hose to Tilt Cylinder40 02961057 02961057 2 Hose-Motor to Bulkhead (Rotary)

02961074 02961074 2 Hose-Motor to Bulkhead (Flail)02961058 02961058 1 Hose-Motor to Bulkhead (Flail Axe)02961059 02961059 1 Hose-Motor to Bulkhead (Flail Axe)

41 02839000 02839000 2 Hose-Control Valve to Swing Cylinder42 02905000 02905000 1 Hose-Control Valve to Lift Cylinder43 02905100 02905100 1 Hose-Control Valve to Lift Cylinder44 02905200 02905300 1 Hose-Control Valve to Dipper Cylinder

20' & 23' VERSA BOOM HYDRAULIC SYSTEM

R 2-18-96

Parts Section 6-64

PAR

TS

VERSA/5-91


P/N 02898600

222120

87

109 1011 11

53 2

21171615

12

6

1

1821

131921

15

14

161721

418, 21, 22


1 02899000 1 Blade Housing Weldment (Reverse)2 02874601 1 Deflector Weldment3 02875001 1 Hinge Pin4 00002700 2 Flatwasher5 00026200 2 Cotter Pin6 02898801 1 Back-up Plate Weldment (Reverse)7 02886900 5 Bolt8 00001800 5 Locknut9 02811000 ref Cylinder10 02276700 ref Cylinder Pin11 37107B13 ref Hair Pin Clip12* 02959076 1 Weldment, Cover Housing - Front (Reverse)13 02959075 1 Flap Mount Bracket14 02959079 1 Rubber Flap15 02959086 3 Rubber Flap16 02959087 3 Clamp Bar Flap Deflector17 02961677 11 Bolt18 00023100 7 Bolt19 00010600 1 Bolt20 00059700 2 Flat Socket Cap Screw21 00015800 20 Locknut22 00011100 5 Flatwasher23 02880900 1 Bolt24 00002701 1 Flatwasher25 00037200 1 Locknut

* Includes item 13 P/N 02959075

23, 24, 25

BLADE HOUSING ASSY (REVERSE)

R 2-18-96

Parts Section 6-65

PAR

TS

VERSA/8-94


17' BOOM LIFT CYLINDER P/N 02962297**

12345123451234512345

12341234

1234512345

12345123451234512345

12345123451234512345

12341234

2

3

5

7

11

12

1723

19

2122

10

88

18

6 4

24

1615 13

9

1234123412341234

11

10

9

2025

R 2-18-96


1 02962651 1 Hydraulic Cylinder2 02962163 1 Gland3* -------------- 1 “O” Ring4 02962889 1 Rod Assembly5 02962888 1 Barrel Assembly6 02962160 1 Piston7 02252400 1 Locknut8 02960018 2 Elbow9 00749946 Ref. Washer10 02030300 Ref. Nut11 00750479 Ref. Bolt12 02960255 Ref. Allen Head Bolt13 02960254 1 Nut14 02962158 1 Collar15* -------------- 1 Wear Ring16* -------------- 1 Piston Seal17* -------------- 1 “O” Ring18 02962169 1 Set Screw19 02962170 1 Nylon Insert20* -------------- 1 Rod Wiper21* -------------- 1 Rod Seal22* -------------- 1 Buffer Seal23* -------------- 1 Back-Up Ring24 02867000 1 Rod Clevis25 02959881 2 Bushing

* Included in Seal Kit P/N 02962164**Includes items # 1, 8, & 25

141

Parts Section 6-66

PAR

TS

VERSA/8-94


CYLINDER SWING

R 12-03-98

12

13

139

5

8

2418

19

20

1415

212223

2

1

4637

10

8

16 17


1 02961476 1 Hydraulic Cylinder2 02962157 1 Gland3* ------------- 1 “O” Ring4 02962166 1 Rod Assembly5 02962165 1 Barrel Assembly6 02962160 1 Piston7 02252400 1 Locknut8 02960018 2 Elbow9 02960458 Ref. Turning Arm Pin (Use w/Spring Bushing)

02966767 Ref. Turning Arm Pin (Use w/Teflon Bushing)10 00749946 Ref. Washer12 02930100 Ref. Cylinder Pin13 00606000 Ref. Cotter Pin14 02959890 2 Bushing (Spring)

02965214 2 Bushing (Teflon)15 02962158 1 Collar16* ------------- 1 Wear Ring17* ------------- 1 Piston Seal18* ------------- 1 “O” Ring19 02962169 1 Set Screw20 02962170 1 Nylon Insert21* ------------- 1 Rod Wiper22* ------------- 1 Rod Seal23* ------------- 1 Buffer Seal24* ------------- 1 Back-Up Ring

* Included in Seal Kit P/N 02962159** Includes items # 1,14, & 8

P/N 02961778**

Parts Section 6-67

PAR

TS

VERSA/8-94


17' BOOM DIPPER CYLINDER ASSEMBLY

1234512345123451234512345

12345123451234512345

12341234

1234512345

123123

2

4

16 17

18

20

212225

1212121212

1212121212

15

5

7 6

8

9

1234567812345678

12312312312312310

1326

11 12

19

8

24

23

14

3


1 02961478A 1 Hydraulic Cylinder2 02962157 1 Gland3* -------------- 1 “O” Ring4 02967043 1 Rod Assembly5 02967034 1 Barrel Assembly6 02962154 1 Piston7 02252400 1 Locknut8 02960018 2 Elbow9 02967013 Ref. Pin10 02967248 Ref. Set Screw11 02969980 Ref. Dipper Pin12 00007000 Ref. Bolt13 00015800 Ref. Locknut14 02965548 2 Bushing15 02962158 1 Collar16* -------------- 1 Wear Ring17* -------------- 1 Piston Seal18* -------------- 1 “O” Ring19 02962169 1 Set Screw20 02962170 1 Nylon Insert21* -------------- 1 Rod Wiper22* -------------- 1 Rod Seal23* -------------- 1 Buffer Seal24* -------------- 1 Back-Up Ring25 02965214 2 Bushing26 00011100 Ref. Flatwasher27 02030300 1 Locknut28 00749946 1 Washer* Included in Seal Kit P/N 02962159** Includes items # 1, 8, 14, 25, & 26

27

28

1234123412341234

NOTICE: Dipper PinIf your Unit uses a Dipper Pinthat is not threaded for a nut, seeService Bulletin 9500016.

P/N 02967017

R 01-16-96

Parts Section 6-68

PAR

TS

VERSA 07/02


17', 20', & 23' BOOM TILT CYLINDER ASSEMBLY


02961475B 1 Hydraulic Cylinder

1 02975869 1 Tube Weldment2 02975302 1 Cyl. Head3 02975454 1 Piston4 02975870 1 Rod Weldment5* -------------- 1 “O” Ring6* -------------- 1 Seal, Hallite Rod7* -------------- 1 Seal, Wiper Rod8* -------------- 1 Seal, Piston Ring9* -------------- 1 Pin10 5JRC16140 1 Flatwasher11* -------------- 1 Pin12 02960018 2 Elbow13 02975530 1 Seal Kit


1

2

34

5

6 7

891011

1212

Piston Pressed onw/ Loctite 271 orEquivalent.

Apply a Drop of Loctite #242 3-Places120° Apart On the First Two Thirdsof the Cylinder Head.

Parts Section 6-69VERSA/ 8-94

PAR

TS


20' & 23' BOOM DIPPER CYLINDER ASSEMBLY

12345123451234512345

12345123451234512345

1234512345

12341234

123123

2

4

16 17

18

20

212225

11111

11111

15

5

1

7 6

8

13

123456712345671234567

121212121226

1110

12

19

8

24

23

14

3

9

P/N 02961780T

27

28

R 12-02-97


1 02961482A 1 Hydraulic Cylinder2 02962140 1 Gland3* ------------- 1 “O” Ring4 02967042 1 Rod Assembly5 02967037 1 Barrel Assembly6 02962131 1 Piston7 02252400 1 Locknut8 02960018 2 Elbow9 00007000 Ref. Bolt10 00011100 Ref. Flatwasher11 00015800 Ref. Nut12 02966936 Ref. Pin13 02967013 Ref. Pin14 02965548 2 Bushing15 02962129 1 Collar16* ------------- 1 Wear Ring17* ------------- 1 Piston Seal18* ------------- 1 “O” Ring19 02962169 1 Set Screw20 02962170 1 Nylon Insert21* ------------- 1 Rod Wiper22* ------------- 1 Rod Seal23* ------------- 1 Buffer Seal24* ------------- 1 Back-Up Ring25 02965214 2 Bushing26 02967248 1 Set Screw27 00749946 1 Washer28 02030300 1 Locknut* Included in Seal Kit P/N 02962141** Includes items # 1, 14, 25, 8, 26

VERSA 09/01 Parts Section 6-70

PAR

TS


BOOM-AXE HEAD ASSEMBLY - 60"

P/N 02974676


02974676 1 60" X-Frame Square Head Assy

1 02974674A 1 Square Head 60"2 02958459 1 Hitch Post - 4 Bar

00003500 1 Grease Fitting02958424 1 Bushing

3 02892100 6 Bolt4 00037200 12 Locknut5 02962272 1 Motor6 02973438 6 Bolt7 02972723 1 Door Lock8 02972726 1 Pin9 2196 1 Clip Pin10 5710121 1 Cover Plate11 5F5180 2 Wingnut12 02973857A 1 Door13 02845600 1 Bolt14 00695100 1 Nut15 02975229 3 Flap Deflector - Door16 02975230 1 Flap Deflector - Door17 00753642 14 Bolt18 00011100 50 Flatwasher19 00015800 34 Locknut20 02885700 2 Flap Deflector - Rear21 02957380 1 Side Guard22 02957496 1 Rear Flap Retainer23 00023100 19 Bolt24 02035800 25 Woodwasher

1

2

20

3

4

5

4

7

8

9

10

11

12

13

1417

19

15

19 18

18

16

23

21

2224

1918

17

18 6


PAR

TS


1234512345123451234512345

123412345

123456123456123456123456123456

1234512345123451234512345

123412341234

1

37

13

1824

20

202122

8

19

6

1412341234123412341234

11

10

98

9

10

11

12

1716 5

2

4

20' & 23' BOOM LIFT CYLINDER P/N 02961779**

15ITEM PART NO. QTY DESCRIPTION

1 02961479 1 Hydraulic Cylinder2 02962151 1 Gland3* -------------- 1 “O” Ring4 02962150 1 Rod Assembly5 02962149 1 Barrel Assembly6 02962148 1 Piston7 02252400 1 Locknut8 02960018 2 Elbow9 00750479 Ref. Bolt10 00749946 Ref. Washer11 02030300 Ref. Nut12 02867000 1 Rod Clevis13 02960255 Ref. Allen Head Bolt14 02960254 1 Nut15 02962152 1 Collar16* -------------- 1 Wear Ring17* -------------- 1 Piston Seal18* -------------- 1 "O" Ring19 02962169 1 Set Screw20 02962170 1 Nylon Insert21* -------------- 1 Rod Wiper22* -------------- 1 Rod Seal23* -------------- 1 Buffer Seal24* -------------- 1 Back-Up Ring25 02959891 2 Bushing

* Included in Seal Kit P/N 02962153**Includes items # 1, 8, & 25

R 2-18-96

25

1212121212

1212121212

1212121212

1212121212

VERSA/ 11-93 Parts Section 6-72

PAR

TS


60" X-FRAME SQUARE HEAD ASSEMBLY P/N 02961793

12121212123123

121212123123

111123123

2,4

7 96

18

1212

11

11

1212

1212

1

8 5,21

19 20

22

23,24,25,2627,29

10,11,12

28,29

30

TORQUE ITEM #2 ,#6 &#23 TO 400 FT./LBS.

DANGER ROLL PIN #26 MUST BE INSTALLED TO PREVENT NUT FROM BECOMINGLOOSE AND BLADE FROM BEING THROWN FROM THE MACHINE.

DANGER BLADES SHOULD ALWAYS BE REPLACED IN PAIRS. BLADES OF DIFFERENTWEIGHTS CAN CAUSE SERIOUS IMBALANCE AND DAMAGE TO THEMACHINE AND PERSONNEL. WHEN REPLACING BADES, BLADE BOLTS,BUSHINGS, NUTS AND WASHERS MUST BE CHANGED.

13

TORQUE ITEM #27 &#28 TO 600 FT./LBS.


1 02962272 Spindle Housing/Spindle Assembly w/Hydraulic Motor & Fittings 1(High Speed) (S/N 03260-03400 & 03501 and Above)

02961798 Spindle Housing/Spindle Assembly w/Hydraulic Motor & Fittings 1(S/N 03259 and Prior & 03401-03500)

02960553B Spindle Housing & Spindle Assembly 102962112 Motor (High Speed) (S/N 03260-03400 & 03501 and Above) 102961732 Motor (S/N 03259 and Prior & 03401-03500) 1

2 02892100 Bolt 64 00037200 Nut 65 02782300 Blade Bar Assembly (items 19-29) 16 02782000 Bolt 47 00003901 Lockwasher 48 02957331 Skid Shoe (Right hand - 41-1/2" long) 19 02957332 Skid Shoe (Left hand - 61-1/2" long) 110 00059700 Bolt 711 00015800 Nut 712 00011100 Washer 713 02892000 Bolt 418 02960664 Square Head Weldment 119 02781600 Top Leaf 120 02781700 Middle Leaf 121 02781800 Bottom Leaf 122 02761500 Blade Set 123 02782900 Blade Bolt 224 00020900 Slotted Nut 225 02957089 Lockwasher 226 00023200 Spiral Roll Pin 227 02782100 Bolt 228 02782200 Bolt 229 02032200 Lockwasher 430 02961038 Gasket 1

R 01-30-98


PAR

TS


SPINDLE & HOUSING ASSEMBLY


1 02963815 1 Housing2 02960561 1 Spindle3 02960558 1 Bearing Ring4 02960559 1 Seal5 00754627 1 Snap Ring6 02960557 1 Bearing7 00769938 1 Bearing8 02962030 1 Nut9 02959018 1 Grease Relief Fitting10 00003500 1 Plug

P/N 02960553BFill with NLGI EP#2 GreaseAlamo Group P/N 00900000DO NOT OVERFILL!

R 10-04-02


PAR

TS


HYDRAULIC MOTOR ASSEMBLY

4

1212

121212

111

111

1

2

3

2

34

12345123451234512345


1 02962112 1 Hydraulic Motor (High Speed)(S/N 03100-03255 & 03356 and Above)

02961732 1 Hydraulic Motor (S/N 03099 and Prior & 03256-03355)2 02962774 2 Elbow3 00749101 2 Split Flange Kit4 02044200 2 "O" Ring

R 5-6-94


PAR

TS


HYDRAULIC MOTOR REPAIR PARTS

R 2-19-96

3" - 02961732 Motor

2-3/4" - 02962112 Motor


1 02961933 1 Snap Ring2* -------- 1 “O” Ring3 02961932 1 Seal Retainer (02962112 motor)

02962286 1 Seal Retainer (02961732 motor)4* -------- 2 Seal5 02961926 1 Mounting Flange w/Bushings6 02961940 1 Plug7 02961931 2 Check Assemby8* -------- 4 Seal End9* -------- 2 Thrust Plate10 02962287 1 Gear Set (02962112 motor)

02961929 1 Gear Set (02961732 motor)11* -------- 2 Square Seal12 02961924 4 Dowel Pin13 02962288 1 Gear Housing (02962112 motor) 02961928 1 Gear Housing (02961732 motor)14 02961927 1 Porting Flange w/Bushing15 02961917 4 Washer16 02962289 4 Bolt (02962112 motor)

02961918 4 Bolt (02961732 motor)17* -------- 4 Side Seal (not shown)

* included in major rebuild seal kit part number 02961939** minor rebuild seal kit is 02962538 (includes all parts of kit except thrust plates)


PAR

TS


COUNTERWEIGHT ASSEMBLY

R 4-23-94


1* ------------- ref Mount2* ------------- ref Oil Resevoir Assembly3* ------------- 1 Counterweight4 00037100 6 Bolt5 00003901 6 Lockwasher6 00000200 6 Nut

* Varies with tractor make and model. See your mounting instructions for correct part numbers.


PAR

TS


VERSA BOOM INSERT ASSEMBLY

Caution: To prevent boom from swingingpast center, the proper swing cylinder pinlocation must be used. On a Rear swingunit, the outside hole should be used. Ona Front swing unit the inside hole shouldbe used.

Front SwingAttachment

Rear SwingAttachment

20

R 2-19-96


1* ------------- 1 Versa Boom Insert2* ------------- 1 Basic Tractor Mt. Weld.3 02880700 1 Pin4 00753013 1 Bolt5 00001800 1 Nut6 10546100 2 Bolt7 02032200 2 Locknut8 00059500 2 Nut9 ------------- 1 King Post Assembly (see page 6-85)

10 02961778 1 Swing Cylinder11 02930100 1 Pin12 00606000 2 Cotter Pin13 00749946 2 Washer14 02966767 1 Turning Arm Pin16 02959746 1 Stop - Rear Swing

02963037 1 Stop - Front Swing17 00753013 2 Bolt18 00001800 2 Nut20 02959890 4 Bushings* Varies with tractor make and model.

VERSA 07/02 Parts Section 6-78

PAR

TS


VALVE, CONTROL, BOOM, 4 SPOOL

P/N 02962298


1 63042700 2 Adapter2 02962249 8 Adapter3 02750100 2 Detent Kit (Standard)4 02962303 1 Valve Section - Inlet Cover5 02962300 1 Valve Section - Swing6 02962028 1 Valve Section - Lift7 02962301 1 Valve Section - Dipper8 02962302 1 Valve Section - Tilt9 02046700 1 Valve Section - Outlet Cover11 02049600 ref Handle Linkage Repair Kit12 00021800 3 Nut13 00011700 3 Lockwasher14 02044900 3 Bolt16 02698200 3 Tie Rod17 00013901 6 Nut18 00545500 4 O-Ring Kit *19 02958734 2 Detent Kit - Float (incl. # 26)20 02728200 ref Relief Cartridge (Set at 875 PSI)22 02785300 ref Main Relief Valve Seal Kit23 02956999 ref Relief Cartridge (Set at 1500 PSI)24 02957172 ref Load Check Plug Assy (2000 PSI)25 02957191 ref Main Relief (2500 PSI)26 02962596 ref Detent Cap Only27 02957194 ref Relief Cartridge (Set at 2000 PSI)

02962403 ref Restrictor Assembly (not shown)02965115 ref Seal Kit for Relief Cartridges

28 02962403 5 One Way Restrictor29 02962778 ref Relief Cartridge (Set at 2500 PSI)

* Contains Spool Seals for One Section Only and All of the Seals between Sections.

12

23 3

2

20 1926

2

20 24

1926

26

12-13-143

17918

24

87

29

6

275

11

23

2225

416

17

28 28 28 28

Torque nutsto 32 ft.lbs.

Torque relief cartridges or loadcheck plugs to 20 ft.lbs. Thereare two per vavle section.


PAR

TS


INDIVIDUAL VALVE SEGMENT (NON-FLOAT)


1 02750100 1 Positioner2 ------------- 2 See Valve Bank for Part #3 02965115 Ref. Seal Kit for Relief Cartridge4 00545500 Ref. O-Ring Kit*5 02962529 Ref. Washer and O-Ring

* Contains Spool Seals for One Section and All of the Seals between Sections.

R 09-01-92


PAR

TS



1 02958734 1 Positioner, Float2 ------------- 2 See Valve Bank for Part # on

Load Check or Work Port Relief.3 02965115 Ref. Seal Kit for Relief Cartridge4 00545500 Ref. O-Ring Kit*5 02962529 Ref. Washer and O-Ring6 ------------- Ref. O-Ring (included in Seal Kit #00545500)7 ________ Ref. O-Ring (included in Seal Kit #00545500)

* Contains Spool Seals for One Section and All of the Seals between Sec-tions.

INDIVIDUAL VALVE SEGMENT (FLOAT)

R 09-01-92


PAR

TS


KING POST ATTACHMENT

NOTICE: PLAIN BUSHINGIf your Unit uses this Bushing,please order parts using thispage.

R 2-19-96

ITEM PART NO. QTY. DESCRIPTION

1 02965545 1 King Pin W/Bushing #16 For20',23' and 28' Booms

2 02965555 1 Front Turning Arm WeldmentW/Bushing #17

02965556 1 Rear Turning Arm WeldmentW/Bushing #17

3 02965536 1 Steel Bushing4 02966767 1 Turning Arm Pin (Use w/Teflon Bushing)5 02957008 2 Bearing Cup and Cone Assembly6 02956882 1 Ring, Bottom Bearing Seal7 02956941 1 Ring, Top Bearing Seal8 02956818 1 Bearing Support Collar9 02956836 1 Seal10 02956837 1 Seal11 02956838 1 Lockwasher12 02956839 1 Nut13 00606000 1 Pin14 00752176 1 Zerk Fittings16 02959225 1 Bushing17 02965548 1 Teflon Impregnated Bushing

Parts Section 6-82VESRA/ 5-91

PAR

TS


5

8

10

11

126

1

9

14

4

13

2

15

17

7

5

R 2-19-96

3

NOTICE: SERRATED BUSHINGIf your Unit uses this Bushing,please order parts using nextpage.

16



PAR

TS


ITEM PART NO. QTY. DESCRIPTION

1 02956821 1 King Pin w/Bushing

2 02967171 1 Rear Turning Arm Weldment w/Teflon Bushing

02967397 1 Front Turning Arm Weldment w/Teflon Bushing

02956830 ref Rear Turning Arm Weldment w/Steel Bushing

02956831 ref Front Turning Arm Weldment w/Steel Bushing

3 02958345 1 Steel Serrated Bushing

4 02966767 1 Turning Arm Pin - Chrome Plated -

Use Only with Teflon Bushing

02960458 ref Turning Arm Pin - Greaseable -

Use Only with Steel Serrated Bushing

5 02957008 2 Bearing Cup and Cone Assembly

6 02956882 1 Ring, Bottom Bearing Seal

7 02956941 1 Ring, Top Bearing Seal

8 02956818 1 Bearing Support Collar

9 02956836 1 Seal

10 02956837 1 Seal

11 02956838 1 Lockwasher

12 02956839 1 Nut

13 00606000 1 Pin

14 00752176 1 Grease Fitting

15 02965548 1 Bushing - Teflon Impregnated - 1-1/4 OD

02957501 ref Bushing - Steel Serrated - 1-3/8 OD

16 02959225 1 Bushing

17 02965538 1 Main Pin Weldment

02967490 ref Main Pin Weldment - Greaseable -

Use Only w/o Grease Hole in top (Item #1)

R 2-19-96



PAR

TS


60" VERSA FLAIL ASSEMBLY P/N 02963836

S/N 02061 and After

1117

18

28

22311415

6

24

23

27

29

26

16

13 21 20

8

12

910

1 2 3 4

30

25

19

R 09-09-98

32

33

3435


PAR

TS



S/N 02061 and After

R 4-08-02


1 000672 1 Quick Disconnect Hub10119000 3 Bolt - For Quick Disconnect Hub

2 000673 1 Pulley3 02959439 1 Motor Plate

00023100 2 Bolt - Motor Plate Attachment00012101 2 Lockwasher - Motor Pl. Attach.00015800 2 Nut - Motor Plate Attachment

4 02962020 1 Hydraulic Motor Assembly02961282 1 Hose, Pressure Side Hyd. Motor02961283 1 Hose, Return Side Hyd. Motor02961306 1 Hose Sleeving

5 701650 1 Trash Deflector Package Comes With All Hardware6 107441 1 Flail Weldment7 02962439 1 Rubber Bumper

02958114 1 Bolt - Bumper Attachment00012101 1 Lockwasher - Bumper Attachment00015800 1 Nut - Bumper Attachment

8 000539 1 Spring00752738 1 Bolt - Spring Attachment to Head02031800 1 Nut - Spring Attach. to Head

9 702749 1 Idler Pivot Pin00001400 1 Flatwasher - For Idler Pivot Pin00000400 1 Cotter Pin - For Idler Pivot Pin

10 106529 1 R.H. Idler Arm W/Zerk Fitting00035900 1 Bolt - For R.H. Idler Arm

11 103105 1 Idler Pulley00752645 1 Bolt - Pulley To Idler Arm Attach.

12 00011100 1 Flatwasher - Pulley To Idler Arm Attachment13 02959586 1 Pulley - Cuttershaft

02959014 1 Set Screw - Pulley Attachment14 100720 1 Washer - Pulley To Cuttershaft Att.15 000407 1 Bolt - Pulley To Cuttershaft Attach.16 02959463 1 Belt Cover Weldment

00751240 1 5/16 Bolt - Cover Attachment00749017 1 5/16 Nut - Cover Attachment00023500 2 5/16 Flatwasher - Cover Attach.00086000 2 1/4 Bolt - Cover Attachment00024100 2 1/4 Flatwasher - Cover Attach.

17 000702 1 V Belts Matched Pair18 700886 1 Shoe Ware Plate Assembly19 02962207 1 Key - For Hydraulic Motor20 703695 1 Inside Housing & Bearing Assembly

703271 1 Outside Housing & Bearing Assembly21 002315 1 Inside & Outside Bearings22 700616 1 2 - Way Knife Package

702255 1 Heavy Duty 2-Way Knife Package23 103064 2 Fender24 105760 1 Cutter Shaft25 107182 1 Bracket LH

107380 1 Bracket RH26 703575 2 Roller Bearing & Housing Assy. w/Grease Fitting (Keyed)

703976 2 Roller Bearing & Housing Assy. w/Grease Fitting (Hex)02979042 2 Locknut02886900 2 Carriage Bolt000516 2 Carriage Bolt107340 2 Cast Housing703574 2 Bearing (Keyed)002486 2 Bearing (Hex)002037 2 Seal

27 002039 2 Grease Fitting28 00516 4 Carriage Bolt29 00001800 4 Locknut30 107784 1 Roller Assembly w/Hex Shaft31 02959298 1 Key - For Cuttershaft Pulley32 107254 1 Foot Guard33 000001 1 Bolt34 00011700 1 Lockwasher35 00023500 1 Flatwasher


PAR

TS



S/N 02060 and Prior

8

1110 917

13

1415

12

2021

22 23

25 28

2729 30

19

1 2 43

R 09-09-98

6

16

18

24

32 3331


PAR

TS







5 701650 1 Trash Deflector Package Comes With All Hardware6 702397 1 Flail Breakaway Weldment7 02962439 1 Rubber Bumper

02958114 1 Bolt - Bumper Attachment00012101 1 Lockwasher - Bumper Attachment00015800 1 Nut - Bumper Attachment

8 000539 1 Spring00752738 1 Bolt - Spring Attachment to Head02031800 1 Nut - Spring Attach. to Head

9 702749 1 Idler Pivot Pin00001400 1 Flatwasher - For Idler Pivot Pin00000400 1 Cotter Pin - For Idler Pivot Pin

10 106529 1 R.H. Idler Arm W/Zerk Fitting00035900 1 Bolt - For R.H. Idler Arm

11 103105 1 Idler Pulley00752645 1 Bolt - Pulley To Idler Arm Attach.

12 00011100 1 Flatwasher - Pulley To Idler Arm Attachment13 02959586 1 Pulley - Cuttershaft

02959014 1 Set Screw - Pulley Attachment14 100720 1 Washer - Pulley To Cuttershaft Att.15 000407 1 Bolt - Pulley To Cuttershaft Attach.16 02959463 1 Belt Cover Weldment

00751240 1 5/16 Bolt - Cover Attachment00749017 1 5/16 Nut - Cover Attachment00023500 2 5/16 Flatwasher - Cover Attach.00086000 2 1/4 Bolt - Cover Attachment00024100 2 1/4 Flatwasher - Cover Attach.


702404 1 Outside Housing & Bearing Assembly21 002315 1 Inside & Outside Bearings22 700616 1 2 - Way Knife Package

702255 1 Heavy Duty 2-Way Knife Package23 103064 2 Fender24 105760 1 Cutter Shaft25 001096 2 Nut27 105697 2 Bracket Assembly28 105699 2 Spacer29 702485 2 Roller Bearing & Housing Assy. w/Gauge Fitting

000142 4 Bolt-(Bearing & Housing Att.)000520 4 Lockwasher-(Bearing & Housing Attachment)000170 4 Nut-(Bearing & Housing Attach.)

30 105701 1 Roller Assembly31 000001 1 Bolt32 00011700 1 Lockwasher33 00023500 1 Flatwasher

60" VERSA FLAIL ASSEMBLY P/N02962017

S/N 02060 and Prior

R 09-09-98


PAR

TS



S/N 02061 and After

22

1 2 3 4

1711

109

8

1216

13 21 2018

25

30

27

29

26 28

15 14 31 23

24

6

19

R 09-28-98

32

3334 35


PAR

TS



S/N 02061 and After

R 4-08-02


1 000672 1 Quick Disconnect Hub10121000 3 Bolt - For Quick Disconnect Hub00011700 3 Lockwasher




5 700524 1 Trash Deflector PackageComes With All Hardware

6 107442 1 Flail Weldment7 02962439 1 Rubber Bumper

02958114 1 Bolt - Bumper Attachment8 000539 1 Spring

00752738 1 Bolt - Spring Attachment To Head02031800 1 Nut - Spring Attach. To Head

9 702749 1 Idler Pivot Pin with Zerk Fitting00001400 1 Flatwasher - For Idler Pivot Pin00000400 1 Cotter Pin - For Idler Pivot Pin

10 106529 1 R. H. Idler Arm00035900 1 Bolt - For R.H. Idler Arm

11 103105 1 Idler Pulley00752645 1 Bolt - Pulley to Idler Arm Attach.

12 00011100 1 Flatwasher - Pulley To Idler ArmAttachment

13 500031 1 Pulley - Cuttershaft02959014 1 Set Screw - Pulley Attachment

14 100720 1 Washer _ Pulley To Cuttershaft Att.15 000407 1 Bolt - Pulley To Cuttershaft Attach.16 02959463 1 Belt Cover Weldment

00751240 1 5/16 Bolt - Cover Attachment00749017 1 5/16 Nut - Cover Attachment00023500 2 5/16 Flatwasher - Cover Attachment00086000 2 1/4 Bolt - cover Attachment00024100 2 1/4 Flatwasher - Cover Attach.


703271 1 Outside Housing & Bearing Assembly21 002315 2 Inside And Outside Bearings22 02957644 1 2 - Way Knife Package

702255 1 Heavy Duty 2-Way Knife Package23 103064 2 Fender24 105761 1 Cutter Shaft25 107182 1 Bracket LH

107380 1 Bracket RH26 703575 2 Roller Bearing & Housing Assy. w/Grease Fittings (Keyed)

703976 2 Roller Bearing & Housing Assy. w/Grease Fittings (Hex)02979042 2 Locknut000516 2 Carriage Bolt02886900 2 Carriage Bolt107340 2 Cast Housing703574 2 Bearing (Keyed)002486 2 Bearing (Hex)002037 2 Seal107340 2 Cast Housing Only (No Bearing)

27 002039 2 Grease Fitting28 000516 4 Carriage Bolt29 00001800 4 Locknut30 107785 1 Roller Assembly w/Hex Shaft31 02959298 1 Key - For Cuttershaft Pulley32 107256 1 Foot Guard33 000001 1 Bolt34 00011700 1 Lockwasher35 00023500 1 Flatwasher


PAR

TS



S/N 02060 and Prior

8

11 10 917

13

18

1415

16

12

2021

22 23

2425 28

2729 30

19

1 2 43

R 09-09-98

6

31 32 33


PAR

TS







5 701650 1 Trash Deflector PackageComes With All Hardware

6 105202 1 Flail Breakaway Weldment7 02962439 1 Rubber Bumper

02958114 1 Bolt - Bumper Attachment8 000539 1 Spring

00752738 1 Bolt - Spring Attachment To Head02031800 1 Nut - Spring Attach. To Head

9 702749 1 Idler Pivot Pin with Zerk Fitting00001400 1 Flatwasher - For Idler Pivot Pin00000400 1 Cotter Pin - For Idler Pivot Pin

10 106529 1 R. H. Idler Arm00035900 1 Bolt - For R.H. Idler Arm

11 103105 1 Idler Pulley00752645 1 Bolt - Pulley to Idler Arm Attach.

12 00011100 1 Flatwasher - Pulley To Idler ArmAttachment

13 500031 1 Pulley - Cuttershaft02959014 1 Set Screw - Pulley Attachment

14 100720 1 Washer _ Pulley To Cuttershaft Att.15 000407 1 Bolt - Pulley To Cuttershaft Attach.16 02959463 1 Belt Cover Weldment

00751240 1 5/16 Bolt - Cover Attachment00749017 1 5/16 Nut - Cover Attachment00023500 2 5/16 Flatwasher - Cover Attachment00002100 2 1/4 Bolt - cover Attachment00024100 2 1/4 Flatwasher - Cover Attach.


702404 1 Outside Housing & Bearing Assembly21 002315 2 Inside And Outside Bearings22 02957644 1 2 - Way Knife Package

702255 1 Heavy Duty 2-Way Knife Package23 103064 2 Fender24 105761 1 Cutter Shaft25 001096 2 Nut27 105697 2 Bracket Assembly28 105699 2 Spacer29 702485 2 Roller Bearing & Housing Assy.

w/Grease Fitting000142 4 Bolt- (Bearing & Housing Attachment)000520 4 Lockwasher-(Bearing & Housing Att.)000170 4 Nut-(Bearing & Housing Attachment)

30 105702 1 Roller31 000001 1 Bolt32 00011700 1 Lockwasher33 00023500 1 Flatwasher

S/N 02060 and Prior


R 09-09-98


PAR

TS


HYDRAULIC MOTOR P/N 02961678

R 4-12-01


1 02962210 1 Snap Ring2* -------------- 1 “O” Ring3 02962209 1 Seal Retainer4* -------------- 2 Seal5 02962203 1 Mounting Flange

w/Bushings6 02961940 1 Plug7 02961931 2 Check Assemby8* -------------- 4 Seal End9** -------------- 2 Thrust Plate10 02962206 1 Gear Set11* -------------- 2 Square Seal12 02961924 4 Dowel Pin13 02962205 1 Gear Housing14 02962204 1 Porting Flange

w/Bushing15 02961917 4 Washer16 02962208 4 Bolt17* -------------- 4 Side Seal

(not shown)18* 02976771 1 Seal Retainer19 02962207 1 Key

* included in seal kit part number 02962211 Major Rebuild and part number 02962541 Minor Rebuild.** included in 02962211 only.


PAR

TS


121212

1212

111

111

1

2

3

2

3


1 02961678 1 Hydraulic Motor

2 02961280 2 Elbow

3 00749103 2 Split Flange Kit

123451234512345

HYDRAULIC MOTOR ASSEMBLY 02962020

R 2-19-96


PAR

TS


HEAVY DUTY FLAIL ASSEMBLY

NEW STYLES/N 02199and after

R 2-19-96

ITEM PART NO. QTY DESCRIPTION48" HD FLAIL 60" HD FLAIL

1 107458 107457 1 HD Flail Weldment2 105532 105530 1 Cutter Shaft Weldment3 000533 000533 2 V-Belt4 000672 000672 1 QD Hub5 000673 000673 1 Pulley, Hyd. Motor6 02957177 02957177 2 Cutter Shaft Washer7 103041 103041 1 Idler Pivot Pin8 103064 103064 1 Fender9 02960512 02960512 1 Pulley, Cutter Shaft

02959282 02959282 1 Key, Cutter Shaft Pulley10 000001 000001 1 Bolt11 00023500 00023500 1 Washer12 00011700 00011700 1 Lockwasher13 101778 101778 1 Idler Bearing Spacer14 103105 103105 2 Idler Pulley15 700949 700949 1 Idler Arm w/Grease Fitting16 700886 700886 1 Shoe Wear Plate Assembly

00001800 00001800 6 Nut02886900 02886900 2 Bolt000520 000520 6 Lockwasher000700 000700 4 Shoe Bolt103051 103051 2 Shoe Wear Plate700194 701650 1 Trash Deflector Package (Includes 18,19,20, & 22)


PAR

TS


HEAVY DUTY FLAIL ASSEMBLY

NEW STYLES/N 02199and after

R 4-08-02


18 100101 104682 1 Trash Deflector19 00024100 00024100 7 Washer (Add 2 for 60" Flail)20 02959924 02959924 7 Nut (Add 2 for 60" Flail)22 10058000 10058000 7 Bolt (Add 2 for 60" Flail)23 701431 700616 1 Knife Package Complete (Includes 24,25,26, & 27)24 100759 100759 60 Knife(Add 16 for 60" Flail)25 100761 100761 30 Ring (Add 8 for 60" Flail)26 000026 000026 32 Cotter Pin (Add 8 for 60" Flail)27 102670 102670 30 Pin (Add 8 for 60" Flail)28 02963893 02963893 1 Hydraulic Motor Assembly

00749130 0074913 4 Bolt63000500 6300050 4 Washer

29 02957161 0295716 1 Outer Housing30 02957157 02957157 1 Inner Housing

02957042 02957042 6 Bolt, Outer Housing Attachment00015800 00015800 6 Nut, Outer and Inner Housing Attchment

31 02957166 02957166 1 Housing Cover00753642 00753642 6 Bolt, Inner Housing and Cover Attachment

32 02957167 02957167 2 Roller Bearing33 02957168 02957168 2 Bearing Adapter

00003500 00003500 4 Grease Fitting35 02957169 02957169 1 Seal36 02957173 02957173 2 Seal38 00603300 00603300 2 Bolt39 02961194 02961194 1 Turnbuckle40 02966254 02966254 1 Motor Bracket Weldment

02957042 02957042 4 Bolt00015800 00015800 4 Nut

41 00000400 00000400 1 Cotter Pin42 02960550 02960550 1 Bumper to Head Attachment

02030400 02030400 4 Bolt-Bumper02957941 02957941 4 Nut

43 02958666 02958666 1 Hitch Post Assembly02958424 02958424 1 Bushing02931300 02931300 4 Bolt00037200 00037200 4 Nut

44 107810 107784 1 Roller w/ Hex Shaft45 703976 703976 2 Roller Bearing & Housing Assy. w/ Hex Brg.

002486 002486 2 Bearing w/ Hex Brg.002039 002039 2 Grease Fitting002037 002037 2 Seal

46 000516 000516 4 Carriage Bolt47 02979042 02979042 4 Nut48 107182 107182 1 Bracket LH

107380 107380 1 Bracket RH53 02957348 02957348 2 Spacer54 02960545 02960545 1 Belt Guard Weldment

00999314 00999314 2 Bolt Bumper to Belt Guard00019700 00019700 2 Flatwasher00022200 00022200 2 Lockwasher

58 02959282 02959282 1 Key, Cutter Shaft Pulley59 100768 100768 1 Key

Parts Section 6-96

PAR

TS

VERSA 05-91


R 4-25-94

CUTTERSHAFT - DRIVE SIDE ASSEMBLY


1 00603300 00603300 2 Bolt2 02957177 02957177 1 Cuttershaft Washer3 02959282 02959282 1 Key4 02960512 02960512 1 Pulley, Cuttershaft5 02957168 02957168 2 Bearing Adapter6 02957169 02957169 1 Seal7 02957167 02957167 2 Roller Bearing8 02957157 02957157 1 Inner Housing

02957042 02957042 6 Bolt00015800 00015800 6 Nut

9 02957173 02957173 2 Seal10 107458 107457 1 Housing Weldment11 02957348 02957348 2 Spacer12 105532 105530 1 Cuttershaft Weldment13 000026 000026 32 Cotter Pin14 100761 100761 30 Ring (add 8 for 60" Flail)15 100759 100759 60 Knife (add 16 for 60" Flail)16 102670 102670 30 Pin (add 8 for 60" Flail)

12

56 7

8 10

1112

161314

15

9 5

3

Parts Section 6-97

PAR

TS

VERSA 05-91



1 105532 105530 1 Cuttershaft Weldment2 02957348 02957348 2 Spacer3 02957168 02957168 2 Bearing Adapter4 02957173 02957173 1 Seal5 02957161 02957161 1 Outer Housing6 02957167 02957167 1 Roller Bearing7 107458 107457 1 Housing Weldment8 02957177 02957177 1 Washer9 00603300 00603300 2 Bolt10 02957166 02957166 1 Housing Cover

00753642 00753642 6 Bolt

R 4-25-94

CUTTERSHAFT - NON-DRIVE SIDE ASSEMBLY

1 23

4

5 6

73

8 9

10

Parts Section 6-98

PAR

TS

VERSA 05-91


CASTER WHEEL ASSY - HD FLAIL


1 02035400 1 Bolt2 00012101 1 Lockwasher3 02035800 1 Flatwasher4 02035600 2 Spacer5 02957101 ref Caster Arm Right

02957100 ref Caster Arm Left6 00749943 1 Caster Fork Weldment7 00001200 1 Nut8 00001300 1 Lockwasher9* 02959181 2 Wheel Spacer10* 02031600 1 Wheel Assembly11* 02036301 1 Axle Bushing12 02036400 1 Bolt13 02031000 2 Bushing, Caster Arm14 00750670 2 Grease Fitting

* Included in assembly 02031600

R 02-17-99

Parts Section 6-99

PAR

TS

VERSA 05-91


ROLL PIN #8 MUST BE INSTALLEDTO PREVENT NUT FROM BECOMING

LOOSE AND BLADE FROM BEINGTHROWN FROM THE MACHINE

DANGER

BLADES SHOULD ALWAYS BE REPLACED IN PAIRS. BLADES OF DIFFER-ENT WEIGHTS CAN CAUSE SERIOUS IMBALANCE AND DAMAGE TO THEMACHINE AND PERSONNEL. WHEN REPLACING BLADES, BLADE BOLTS,SPIRAL ROLL PINS, NUTS AND WASHERS MUST BE CHANGED.

DANGER


1 02962636 1 Top Leaf3 02962637 1 Bottom Leaf4 02962634 1 Blade Set5 02782900 2 Blade Bolt6 00020900 2 Slotted Nut7 02957089 2 Lockwasher8 00023200 2 Spiral Roll Pin9 02782200 2 Bolt11 02032200 2 Lockwasher12 02961298 Ref Socket Head Capscrew13 00003901 Ref Lockwasher

* Assembly #02962721 Includes Items 1-11 Only

TORQUE ITEM 5, 9 and 12 TO 400 FT/LBS

50" BLADE BAR ASSEMBLY W/ STRAIGHT BLADES

Parts Section 6-100

PAR

TS

VERSA/12-96


CUTTING HEAD, FLAIL AXE, BELT DRIVE

R 08-06-01

55

Parts Section 6-101

PAR

TS

VERSA 04/03



1 00026200 1 Cotter Pin2 00001800 11 Nut3 00002700 15 Flatwasher4 00011700 4 Lockwasher5 00013500 3 Nut6 00015800 4 Nut7 00019300 8 Nut8 10119000 2 Bolt9 00023100 4 Nut10 00023500 6 Flatwasher11 02027400 4 Bolt12 00035900 4 Nut13 00037200 4 Nut14 00752176 1 Grease Fitting15 00753642 2 Nut16 02716500 8 Nut17 02892000 7 Bolt18 02918600 6 Bolt19 02956712 1 Rubber Flap20 02956714 1 Clamp Bar21 02956748 1 Skid Shoe22 02957041 2 Roller Bearing & Flange

02965509 1 Locking Collar23 02957655M 1 Rotor (Flail Axe) (includes items 48-51)24 02958131A 2 Flange Bearing Assembly25 02958198 1 Key26 00750940 2 Nut27 02964082 1 Carb28 02967325 2 Pulley29 02967328 1 Bushing30 02970301 1 Flail Axe Head31 02970302 1 Hitch Post-Versa32 02970324 1 Plate-Hitch Post Clamp33 02970325 1 Plate-Cover, Belt & Pulley34 02970326 1 Rod-Hinge, F/A Door35 02970465 1 Weldment, Door, Flail Axe36 02970539 3 V-Belt37 02970540 1 Roller38 02970583 4 Nut39 02970585 1 Skid Shoe40 02970586 2 Washer41 02973256 1 Motor Mount42 02970709 1 Plate-Inside44 02970725 1 Hub45 02961678 1 Motor, Piston46 03200521 1 Step Key47 23504500 8 Nut48 02956949 16 Bolt49 02958540 16 Blade Kit50 02956943 32 Bushing51 02956948 16 Locknut52 02675800 2 Bolt53 00001400 2 Flatwasher54 00010300 2 Lockwasher55 02971725 1 Rod

CUTTING HEAD, FLAIL AXE, BELT DRIVE

Parts Section 6-102

PAR

TS

VERSA 10/01


50" X-FRAME SQUARE HEAD ASSEMBLY

1

2

20

3

4

5

4

7

8

9

10

11

12

13

1417

19

15

19 18

18

16

23

21

2224

1918

17

18 6

NOTE: For a full Description ofBlades See Pages 99,106 & 107.

25

27

26

SQUARE HEAD ASSEMBLY 02974681



Parts Section 6-103

PAR

TS

VERSA 10/01




029746780 1 50" X-Frame Square Head Assy

1 02974664 1 Square Head 50"2 02958459 1 Hitch Post - 4 Bar

00003500 1 Grease Fitting02958424 1 Bushing

3 02892100 6 Bolt4 00037200 12 Locknut5 02962272 1 Motor6 02973438 6 Bolt7 02972723 1 Door Lock8 02972726 1 Pin9 2196 1 Clip Pin10 5710121 1 Cover Plate11 5F5180 2 Wingnut12 02974483 1 50" Square Head Door Weldment13 02845600 1 Bolt14 00695100 1 Nut15 02975227 3 Flap Deflector - Door16 02975228 1 Flap Deflector - Door17 00753642 14 Bolt18 00011100 50 Flatwasher19 00015800 34 Locknut20 02885700 2 Flap Deflector - Rear21 02957380 1 Side Guard22 02957496 1 Rear Flap Retainer23 00023100 19 Bolt24 02035800 25 Woodwasher25 02962721 1 Blade Bar26 02971745 1 Blade Bar w/ Grass Blade27 02964457 1 Blade Pan

Parts Section 6-104

PAR

TS

VERSA 05-91



P/N 02962243

TORQUE ITEM NO.6 TO 400 FT./LBS.

TORQUE ITEM NO.2 TO 400 FT./LBS.


1 02962272 Spindle Housing/Spindle 1Assembly w/Hydraulic Motor &Fittings

02960553B Spindle Housing & Spindle Assembly 102962112 Motor w/Fittings 1

2 03200269 Bolt 64 00037200 Nut 65 02964457 Pan and Blade Assembly 16 02886600 Bolt 47 00003901 Lockwasher 48 02960882 Skid Shoe (right hand) 19 02960883 Skid Shoe (left hand) 110 00059700 Bolt 711 00015800 Nut 712 00011100 Washer 713 02892000 Bolt 218 02960776 Square Head Weldment 1

R 4-25-94

1111123123

1111123123

12121212123123

2,4

13

75

18

69

12 11212

12

1212

1212

1

10,11,12

8

Parts Section 6-105

PAR

TS

VERSA 05-91


50" BOOMBLADE OPTIONS


PA

RT

S


STUMP JUMPER PAN ASSEMBLY 50" SQ. HEAD

TORQUE ITEM #8 TO 400 FT./LBS.


1 02964804** 1 Stump Jumper Pan Assembly2 02962634 1 Blades-Matched Set of 2

02962722 1 Blades-Matched Set of 33 02964330 3 Blade Bolt4 00755623 3 Heat Treated Washer5 00023200 3 Spiral Roll Pin6 00020900 3 Nut7 02030300 3 Locknut8 00748547 6 Washer9 02964162 3 Spacer10 7A16824 3 Bolt11 00003901 4 ref Lockwasher12 02886600 4 ref Bolt13 02964954 3 Key14 02964161 3 Bushing15 02965229 3 Spacer

* Includes Items 1-6 Above** Includes Items 7, 8, 9, & 10

Blades should always be replaced in sets. Blades of different weights can cause seriousimbalance and damage to the machine and personnel. When replacing blades, BLADEBOLTS, BUSHINGS, NUTS, AND WASHERS MUST BE CHANGED.

DANGER:

DANGER: Roll pin #5 must be installed to prevent nut from becoming loose and blade from beingthrown from the machine.

R 09-18-01

P/N 02964457*

131415

3

11

10

8

12

2

3

1413

1

489

5

64

5

6

7

15

NOTE:Items 7,8,9, & 10attaches Bar to Pan.


PA

RT

S



02971745 - Grass Blade Bar Assy

1 02970195 1 Blade Bar Weldment2 02977402 1 Blade Set3 8227 2 Bolt4 9216 2 Washer5 5JRC16140 2 Nut

BLADE BAR ASSEMBLY - GRASS

W/GRASS BLADES P/N 02971745


PA

RT

S


123123

4

5

6

7

0

12

13

14

15

16

11

8

9

122

3

18

89

10


P/N 02962112

1


PA

RT

S



1 02961933 1 Snap Ring

2* -------- 1 “O” Ring

3 02961932 1 Seal Retainer

4* -------- 2 Seal


6 02961940 1 Plug

7 02961931 2 Check Assemby

8* -------- 4 Seal End

9* -------- 2 Thrust Plate

10 02962287 1 Gear Set

11* -------- 2 Square Seal

12 02961924 4 Dowel Pin



15 02961917 4 Washer

16 02962289 4 Bolt

17* -------- 4 Side Seal (not shown)

18 02962286 1 Retainer Seal




P/N 02962112

HYDRAULIC MOTOR REPLACEMENT PARTS


PA

RT

S


4

121212

1212

121212

121212

1

2

3

2

3


1 02962112 1 Hydraulic Motor

2 02962774 2 Elbow

3 00749101 2 Split Flange Kit

4 02044200 2 "O" Ring

4

123451234512345

HYDRAULIC MOTOR WITH FITTINGS

R 2-20-96


PA

RT

S


1

2

3

4

5

VALVE BANK COVER

VERSA BOOM


1 02964681 1 4 Handle Valve Cover2 02964685 2 Spacer Tube3 00750940 2 Locknut4 02964686 2 Bolt5 02964683 1 4 Handle Valve Operation Decal

12-96


PA

RT

S


VALVE REMOTE CONTROL

VALVE CONNECTION KITS

02971274 Valve Connect Kit for Boom Units02969129 Valve Connect Kit for Versa Mower/Flail

Follow instructions contained in the kit's package each kitcontains hardware for one cable connection

CONTROL CABLES

02971197 48" Lg Cable - RVC to Valve Kit02971198 60" Lg Cable - RVC to Valve Kit02969130 72" Lg Cable - RVC to Valve Kit02971199 102" Lg Cable - RVC to Valve Kit

1

6

10

10

23

214

20

14

14

22

312 12

1111

25

9, 16

ITEM 3 MAY BE MOUNTED

UPSIDE-DOWN FOR

ADDED HEIGHT. ALSO

MAY BE MOUNTED 180°

FROM SHOWN

USE OF ITEM 2 IS OPTIONAL;

CONTROLS MAY BE MOUNTED

TO SIDE OF ITEM 3.

REMOTE CONTROL STAND

VARIES PER MOUNT KIT

ATTACH SWITCH IN BRACKET

BEFORE ATTACHING BRACKET

TO CONTROL STICKS

USE OF ITEMS 1 & 6

IS OPTIONAL

FOR ITEM 5 IN THE SHOWN

ORIENTATION, PULLING THE

HANDLES TRANSLATES TO A

PUSH ON THE CABLES

9, 16

9, 16

9, 169, 16

9, 169, 16

13, 15

13, 15

8, 9

8, 9

8, 9

18

19

19

7

24

R 10-24-97


PA

RT

S


VALVE REMOTE CONTROL


1 02971188 1 Bracket, Arm Rest Mount

2 02971189 1 Plate, Mount Extension

3 02971190 1 Bracket, Pivot Plate Mount

4 02971191 1 Weldment, Switch Mount

5 02971243 Ref Assembly, Single Axis Control Stick

6 02971260 1 Assembly, Arm Rest

7 02971266 1 Weldment, Bracket-valve connect

8 02733700 3 Bolt (Dual Axis & 2-Handle)

02962691 3 Bolt (3-Handle)

02965619 3 Bolt (4-Handle)

9 00023500 10 FlatWasher

10 00035900 2 Bolt

11 10119000 2 Bolt

12 00011400 2 Bolt

13 00011100 2 Flatwasher

14 00059900 2 Bolt

15 0015800 4 Locknut

16 00750940 7 Locknut

17 00750940 7 Locknut

18 02958470 3 Cable Connect Kit - Ditcher valve

19 65010300 6 Jamnut

20 02964028 1 Switch, Push Pull

21 02964063 1 Knob

22 02961489 1 Pivot Plate Weldment

23 02962748 1 Decal, ON/OFF Switch

24 02973034 4 Knob, Valve Handle

02958203 1 Wire Harness Kit (Not Shown)

R 10-24-97


PA

RT

S


To "B" Port of Tilt Section(Color Code Blue/White)

To Tee on Return Port(Color Code Blue)

To "B" Port ofLift Section(Color CodeGreen/White)

P/N 02964477To "A" Port of Lift Section(Color Code Green)

ITEM PART NO. DESCRIPTION QTY1 02960018* Elbow 42 02964479* Extension Arm Weldment (Heavy Duty) 13 02839000 Hose (ROPS Units) 1

02823600 Hose (Cab Units) 14 02957485* Hose With #4MJ 15 001774 Hose (ROPS Units) 1

02839000 Hose (Cab Units) 16 02880800* Pin 37 02961483* Cylinder 18 02963505* Cylinder, Pin (Greaseable) 19 02957535* Pin 111 02930200* Pin 112 00606000* Cotter Pin 1213 02964478* Linkage Arm Weldment 114 02880100* Cable Assembly 115 02880200* Shackle with Screw Pin 116 02822500* Flatwasher 1217 00750731* Bushing 119 02959925* Lug Bushing 220 10318000 Bolt 2-Ref21 00001800 Nut 2-Ref22 02959438 Pin, Attach. (Special for Flail Head Only) 1-Ref

02965640 Pin, Attach. (For Rotary Head Only) 1-Ref23 02961484* Cylinder 124 02959891 Bushing 125 00752670* Grease Fitting 626 02963467* Lug Bushing 627 02880700 Pin 128 02890900 Hose (ROPS) Units 1

02965475 Hose (Cabs Units) 129 03200287 Hose (ROPS Units) 1

001849 Hose (Cabs Units) 130 000941 Grease Fitting 90° 2

* These parts are included in Extension Arm Assembly p/n 02964297

R 8-26-02

6" SHORTER THAN STANDARDHEAVY DUTY EXTENSION ARM - SPECIAL


PA

RT

S


12341234

1

2

3 4

5

67

16 17

1814

19

20

212210

15

13

13

11

13

9

13

12341234

12

1234512345

1234512345

8


1 02961483 1 Hydraulic Cylinder2 02962134 1 Gland3* -------- 1 “O” Ring4 02962137 1 Rod Assembly5 02962136 1 Barrel Assembly6 02962131 1 Piston7 02252400 1 Locknut8 02962181 1 Adapter9 02880800 1 Pin "E"10* -------- 1 Buffer Seal11 02963505 1 Pin , Greaseable12 02960018 1 Breather Plug13 00606000 3 Cotter Pin14* -------- 1 Back-Up Ring15 02962129 1 Collar16* -------- 1 Wear Ring17* -------- 1 Piston Seal18* -------- 1 “O” Ring19 02962169 1 Set Screw20 02962170 1 Nylon Insert21* -------- 1 Rod Wiper22* -------- 1 Rod Seal


VERSA EXTENSION ARM

TILT CYLINDER ASSEMBLY

1234512345

12345123451234512345


PA

RT

S


VALVE COVER INSTALLATION


1 02964714 1 2 Handle Valve Cover (For Old Style Valve)02964713 3 3 Handle Valve Cover

2 02964785 1 Short Spacer Tube3 02964786 1 Long Spacer Tube4 00015800 2 Nut5 02964783 1 Bolt6 02964784 1 Bolt7 00011100 1 Flatwasher

2

5

6

3

7

4

1


PA

RT

S


VERSA MOWER/FLAIL VALVE


1 02964784 2 Bolt

2 00007000 1 Bolt

3 00015800 3 Locknut


5 02964685 2 Tube Spacer

6 02971219 1 Weldment, Cover

7 02971207 2 Vavle Handle Kit

8 02971283 1 Valve Assembly

9 02966494 1 Weldment, Valve Mount

10 02971482 1 Decal, Valve Operation

R 12-12-96


PA

RT

S


SKID SHOE EXTENSION KIT


1 02964857 1 Skid Shoe Weldment -RH - 60"

02964866 1 Skid Shoe Weldment - RH - 72"

2 02964858 1 Skid Shoe Weldment - LH - 60"

02964867 1 Skid Shoe Weldment - LH - 72"

3 00753642 12 Bolt


5 00015800 26 Locknut

6 00059700 12 Bolt

7 02885600 2 Skid Shoe - 60"

02965663 2 Skid Shoe - 72"

8 02964137 2 Spacer

9 00752673 2 Bolt

10 02959401 1 Blade Bar Spacer

11 02964861 4 Bolt

12

345

456

7

8

954

543

10

11

NOTE: Item No. 10 Blade Bar Spacer (P/N 02959401)is part of this kit and must be installed betweenthe Motor Spindle and the Blade Bar when thiskit is installed on mower.

p/n 02964860- Versa 60"p/n 02964870- Versa 72"

R 4-25-94


PA

RT

S


13

2 3

1 4

4

5

6

3

2

78

10

8

123

2

DEEP DECK MOWER ASSEMBLY

11

9

18

R 4-08-02

1716

14

15

15

1716

19ITEM PART NO. QTY DESCRIPTION

1 02965780 1 Wldmt - Deck2 00015800 20 Nut3 000011100 20 Flatwasher4 00011400 12 Bolt5 2A361612 8 Bolt6 02965751 2 Skid Shoe7 107784 1 Wldmt - Roller (with hex shaft)8 02979042 4 Nut9 000516 4 Carriage Bolt10 703976 2 Bearing Assembly

107340 2 Bearing Housing002486 2 Bearing (with hex bore)002039 1 Grease Fitting

11 107182 1 Wldmt - Roller Mounting Bracket (LH)107380 1 Wldmt - Roller Mounting Bracket ( RH)

12 02885700 ref Rear Flap02938400 ref Rear Chainguard Assembly

13 02965797 1 Front Chainguard Assembly14 02965584 1 Front Chainguard Bracket15 00223900 56 Chain (8 Links, Front Chainguard)

00750900 36 Chain (6 Links, Rear Chainguard)16 00001000 1 Cable Clamp17 00992000 1 Cable18 002037 1 Seal19 02939700 1 Rear Chainguard Mount


PA

RT

S



1 02961732 1 Motor

2 02960951 2 Stud

3 0001800 6 Nut

4 02788400 2 Bolt

5 02961038 1 Gasket

6 02960521 6 Bolt

7 00037200 6 Nut

8 02708700 4 Bolt (Use with Bar Assembly Only)

02967089 4 Bolt (Use with Pan Assembly Only)

9 00003901 4 Locknut

10 02960553C 1 Spindle Assembly

11 02965808 1 Spacer (Use with Pan Assembly Only)

02964456 Ref Pan Assembly

02965737 Ref Bar Assembly

1

2, 3

3

4

35

10 6,711

DEEP DECK MOTOR & SPINDLE

R 6-17-94

98


PA

RT

S


1

2

3

4

5

6

7

8

9

10

11

12


1 02961038 1 Gasket2 02960562C 1 Housing3 02960561 1 Spindle4 02960558 1 Bearing Ring5 02960559 1 Seal6 00754627 1 Snap Ring7 02960557 1 Spindle Cup & Cone Assy.8 00755628 1 Bearing9 02964269 1 Lockwasher10 02962030 1 Nut11 00755633 1 Plug12 02959018 1 Pressure Relief Plug13 00751731 1 Reducer

NOTE: For proper assembly, see Operator's Manual - Maintenance Section.

SPINDLE HOUSING & SPINDLE ASSY. P/N 02960553C

13

R 2-20-96

Fill with NLGI 000 GreaseAlamo Group P/N 00765444DO NOT OVERFILL



1

2

3

4

5


1 02965579 1 Wldmt-Blade Bar2 00747900 2 Nut3 00748000 2 Lockwasher4 02977402 2 Blade Set5 00752827 2 Blade Bolt

BLADE BAR ASSEMBLY

R 12-02-97



DEEP DECK (W/O COOLING TUBE) HYD. MOTOR ASSY.

1234123412341234

1212

12121212

121212

1

4

2

3

1234123412341234

12341234

6

5



R 6-17-94



DEEP DECK (W/COOLING TUBE) HYD. MOTOR ASSY.

1212

121212

121212

121212

1

2

3

5

4

123451234512345


1 02961732 1 Hydraulic Motor2 02754100 1 Elbow (Return Side)3 00749103 1 Split Flange Kit4 00749101 1 Split Flange Kit5 02961028 1 Elbow (Pressure Side)

R 6-17-94





1 02961933 1 Snap Ring2* -------- 1 “O” Ring3 02961932 1 Seal Retainer4* -------- 2 Seal5 02961926 1 Mounting Flange w/Bushings6 02961940 1 Plug7 02961931 2 Check Assemby8* -------- 4 Seal End9* -------- 2 Thrust Plate10 02961929 1 Gear Set11* -------- 2 Square Seal12 02961924 4 Dowel Pin13 02961928 1 Gear Housing14 02961927 1 Porting Flange w/Bushing15 02961917 4 Washer16 02961918 4 Bolt17* -------- 4 Side Seal (not shown)

* included in major rebuild seal kit part number 02961939

** minor rebuild seal kit is 02962538 (includes all parts of kit except thrust plates)



HYDRAULIC SCHEMATIC

R 6-17-94

Pressure

Return


1 02961287 1 Hose2 02961288 1 Hose

2

1



02966905 VERSA BOOM


1 02823600 1 Hose2 02045200 2 Elbow3 02905000 Ref Hose4 02959853 1 Valve5 02959884 2 Straight Adaptor6 02959883 1 Tee7 02966906 1 Accumulator8 00717800 1 Reducer9 02960450 Ref Hose10 02960450 1 Clamp11 02966903 1 Angle12 02963642 - Plate, Valve Control

HYDRO FLOAT OPTION

R 03-11-94



TIMBERCAT ASSEMBLY

6

6

1

2

3

4

9

8

10

4041

314344

32

9

3818

3940

41

2526

27

28

3029

42

22

21

20

24 23

12

13

3435

5

15

16

13

12

19

36

3345

11

37

7

14

17

46

4748

9

49

53

5054 60

56

59

5857

53

5652

55

51

61

62

64

63

R 4-08-02

Apply Loctite #262 or#270 to threads priorto installation.

Apply Loctite

#330 Adhesive

to bottom of

Flange.

Apply Loctite #7387

Activator to Top of

Slide Bearing.



TIMBERCAT ASSEMBLY


02972145 - Timbercat Assy 5'02972146 - Timbercat Assy 7'

1 02971390 1 Bottom Blade (5')02971392 1 Bottom Blade (7')

2 02971389 1 Top Blade (5')02971391 1 Top Blade (7')

3 02971398 1 Slide Bearing (5')02971399 1 Slide Bearing (7')

4 02972363 1 Front Cover (5')02972512 1 Front Cover (7')

5 00751581 1 Bolt6 02960521 2 Bolt (5")

02960521 3 Bolt (7")7 02971400 3 Bushing (5')

02971400 4 Bushing (7')8 5312316 3 Washer (5')

5312316 4 Washer (7')9 00037200 12 Locknut (5')

00037200 13 Locknut (7')10 4720 3 Grease Fitting (5')

4720 4 Grease Fitting (7')11 02972567 1 Timbercat Frame12 00024400 9 Bolt13 02972570 9 Lockwasher14 02972256 1 Valve Mount Plate15 00750959 4 Bolt16 00001300 4 Lockwasher17 02972549 1 Inversion Valve18 02972807 2 Bolt19 00750940 2 Locknut20 02971423 1 Cylinder21 02972505 1 Pin22 00749495 2 Cotter Pin23 02822500 2 Washer24 02972353 1 Cylinder Mount25 02972352 2 Bolt26 02972262 2 Spring


27 02972261 2 Adjusting Bolt28 65010300 2 Nut29 00015800 2 Locknut30 00751281 2 Jamnut31 02972355 1 Cover32 02972815 1 Hitch Post (A-Boom)33 02918600 7 Bolt34 02972504 1 Flow Divider35 02960411 1 Adapter - 45°36 00695100 2 Locknut37 02959390 1 Bolt38 02972750 1 Bracket39 00013500 2 Nut40 00752735 7 Self Tapping Screw41 00023500 7 Washer42 02972507 1 Pin43 00003500 1 Grease Fitting44 02958424 1 Bushing45 02957501 1 Bushing46 02956972 1 Bolt47 00752405 1 Bolt48 02030300 1 Nut49 02972797 1 Hose50 02972798 1 Hose51 02972799 1 Hose52 02972800 1 Hose53 02042300 3 Adapter - Straight54 02161300 1 Adapter - 90°55 001582 1 Plug56 02962213 2 Adapter - 90°57 02042400 1 Adapter - Straight58 02972806 1 Adapter - Special59 02161400 1 Adapter - 90°60 02961098 1 Adapter - 90°61 02973124 1 Hose62 02973125 1 Hose w/ 90°63 02960407 1 Adapter - 90°64 02961085 1 Hose Sleeving65 02974943 1 Adhesive Kit

R 4-08-02


PAR

TS


BUZZBAR ASSEMBLY


PAR

TS


BUZZBAR ASSEMBLY


02974204 - Buzzbar Assembly

1 02974237 4 End Cap2 02974238 2 Blade Spacer3 02974235 3 Hub Assembly4 02974659 8 Bolt5 02974658 8 Bolt6 02976017 16 Slot Nut7 00001200 6 Hexnut8 02978273 1 Wldmt 4 Blade Saw Body9 02974225 3 Tension Adjust Bracket10 00750614 16 Nut11 002521 3 Bolt12 02974241 3 Belt Micro-V13 02974239 4 Sheave14 02974240 3 QD Bushing15 02978265 1 Belt Cover, Long16 02975441 7 Stud, Quick Release17 02975440 7 Retainer, Quick Release18 02975439 7 Receiver, Quick Release19 00011400 9 Bolt20 00011100 10 Flatwasher 3/821 00001800 6 Locknut22 02978249 1 Plate, Motor Mount23 02975175 1 Motor Gear24 00749130 8 Bolt25 02978267 2 Bracket Motor Adjust26 02978268 3 Flat Socket Head 7/16" x 2 1/2"27 02978269 1 Rubber Coupling, A-Boom Motor28 02978266 1 Hub, 20R10 w/ 1" Bore29 02978264 1 Belt Cover, Short30 02970302 1 Hitch Post, A-Boom31 00037200 7 Locknut32 02970324 1 Clamp33 02918600 6 Bolt34 02974215 1 Weldment Hitch Tube35 00015800 9 Locknut36 00023100 8 Bolt37 02974207 1 Bumper38 02974212 1 Wldmt. Rear Shield39 02975600 2 Saw Blade Pack

(2 Blades per pack Shipped Unmounted)40 02961280 2 Adp. Hyd41 00749103 2 Split Flange Kit42 02960411 1 Adp. Hyd43 00024100 4 Flatwasher44 10074000 4 Bolt45 00760886 1 Manifold Block46 00761699 2 O-Ring47 00751790 1 Relief Cartridge48 02973124 1 Hose49 02973125 1 Hose50 02961085 1 Cordura Sleeve


02974204 - Buzzbar Assembly

52 02975434 1 QD-Bushing-Modified

53 00003500 1 Grease Fitting54 02030300 1 Nut55 02958424 1 Bushing56 02956972 1 Bolt57 00752405 1 Bolt58 02669600 5 Key Square59 02961940 1 Plug60 02968896 1 Orange Tie61 02968894 1 Red Tie62 40010000 16 Cotter Pin

(Shipped Unmounted)63 63000500 16 Washer64 02960407 1 Adp. Hyd.65 02978255 1 Motor Mount, Mach66 02978256 1 Drive Shield67 02978272 2 Bolt68 02978372 4 Setscrew


PAR

TS


R4-09-01


1 02962210 1 Snap Ring2* 02964940 1 Spacer3 02976771 1 Seal Retainer4* -------------- 1 Seal5 02964704 1 Mounting Flange

w/Bushings6 02961940 1 Plug7 02961931 2 Check Assemby8* -------------- 4 Seal End9** -------------- 2 Thrust Plate10 02964937 1 Gear Set11* -------------- 2 Square Seal12 02961924 4 Dowel Pin13 02962205 1 Gear Housing14 02976773 1 Porting Flange

w/Bushing15 02961917 4 Washer16 02962208 4 Bolt17* -------------- 4 Side Seal

(not shown)18 02964956 1 Key

* included in seal kit part number 02964939 Major Rebuild and part number 02964938 Minor Rebuild.** included in 02964939 Seal Kit Only.

HYDRAULIC MOTOR P/N 02975175

To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions andthe Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily findthe information you need.

The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety requirementsof tractor operators:

REQUIRED OF THE OWNER:

1. Provide a Roll-Over-Protective Structure that meets the requirements of this Standard; and2. Provide Seatbelts that meet the requirements of this paragraph of this Standard and SAE J4C; and3. Ensure that each employee uses such Seatbelt while the tractor is moving; and4. Ensure that each employee tightens the Seatbelt sufficiently to confine the employee to the protected

area provided by the ROPS.

REQUIRED OF THE OPERATOR

1. Securely fasten seatbelt if the tractor has a ROPS.2. Where possible, avoid operating the tractor near ditches, embankments, and holes.3. Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces.4. Stay off slopes too steep for safe operation.5. Watch where you are going - especially at row ends, on roads, and around trees.6. Do not permit others to ride.7. Operate the tractor smoothly - no jerky turns, starts, or stops.8. Hitch only to the drawbar and hitch points recommended by the tractor manufacturer.9. When the tractor is stopped, set brakes securely and use park lock, if available.

Keep children away from danger all day, everyday...

Equip tractors with rollover protection(ROPS) and keep all machinery guards inplace...

Please work, drive, play and live each day withcare and concern for your safety and that ofyour family and fellow citizens.

TO THE OWNER/OPERATOR/DEALER

In addition to the standard Limited Warranty, Rhino provides one year (12months), (6 months for Commercial/Industrial Users) Limited Warranty on theDriveline components provided that these components have been properlymaintained and lubricated that and have not been subjected to abused or mis-use

VERSA-PL- 04/03Printed U.S.A.

P/N 02897300P

versaparts - frontcover · to the owner/operator/dealer all implements with moving parts are...

Documents