ventilaid and insulaid - mondi group · pdf file• metallised films • aluminium foils...
TRANSCRIPT
Optimising energy efficiency
Ventilaid® and Insulaid®
www.mondigroup.com
IN TOUCH EVERY DAY
Mondi Coatings GmbH
Marxergasse 4A
1030 Vienna, Austria
Tel: +43 1 79013 4968
Fax: +43 1 79013 945
Email: [email protected]
www.mondigroup.com© M
ond
i Coa
tings
Gm
bH
, Aug
ust
2014
, prin
ted
on
FSC
TM c
ertif
ied
pap
er C
olor
Cop
y, 2
50 g
/m2
Technology Extrusion coating and laminating are industrial processes which produce a melt of thermoplastic polymer material. During the extrusion coating process, this melt is transformed into a functional coating on a carrier substrate, whereas in extrusion laminating the additional gluing properties of the melt are used to produce composite structures incorporating specific thermo-plastic characteristics.Extrusion coating and laminating enable the processing of a broad range of polymers and masterbatches for creating multi- layer barriers against grease, water, moisture, gas diffusion, light and chemicals. With this production process, additional functionalities such as breathability can be applied to the material up to a maximum width of 3150mm / 125 inches.
A broad range of carrier substrates can be extrusion coated or laminated: • Various types of wovens and nonwovens• Films: PE, (O)PP, (O)PET, (O)PA,…• Metallised films• Aluminium foils• Scrims and other
reinforcing materials• Paper and board
Mondi Belcoat NV
A. Stocletlaan 11
2570 Duffel, Belgium
Tel: +32 15 300 300
Fax: +32 15 300 280
Email: [email protected]
Mondi Coating Zeltweg GmbH
Bahnhofstrasse 3
8740 Zeltweg, Austria
Tel: +43 3577 9001 404
Fax: +43 3577 9001 451
Email: [email protected]
Mondi Örebro AB
Pappersbruksallén 3A
P.O. Box 926
701 30 Örebro, Sweden
Tel: +46 19 35 45 00
Fax: +46 19 32 38 44
Email: [email protected]
Mondi Coating Steti a.s.
Litomericka 272
41108 Steti, Czech Republic
Tel: +420 416 80 26 43
Fax: +420 416 80 20 07
Email: [email protected]
Plant network
Extrusion coating technology
www.mondigroup.com www.mondigroup.com
Insulaid® Facers
Insulaid® Facers are designed to improve the performance of different insulation materials such as polyurethane, polystyrene, phenol and mineral wool. This state-of-the-art technical product increases insulation values in houses, stables, sport facilities and other building constructions. Our in-depth knowledge of the extrusion coating process enables us to produce insulation facers comprising up to seven layers and more, depending on the properties required.
Insulaid® non-breathable and Ventilaid® breathable membranes
The building membrane range consists of strong, thin, light and flexible breathable and non-breathable membranes. Our products are designed to stand up to various weather conditions like rain, snow, wind and (extreme) heat, both during construction and afterwards. They help creating the perfect airtight envelope for your buildings. Energy loss caused by air movements through ceilings, floors and walls is blocked. Trapped moisture is offered a controlled way out.
Cutting-edge products
• Diffusion tightness• Scratch resistance • Temperature resistance• Dimensional stability• Water and chemical barrier• Fire retardant• Adhesive properties • Visual appearance• Emissivity
Insulaid® and Ventilaid® membranes – Creating a perfect living climate
AirtightFire retardantUV protection
Airtight
Watertight
Water-vapour tight
*Substrate:• Metallic surface• Nonwoven• Paper• Film
Functional layer
Substrate*
Airtight
Watertight
Water-vapour permeable
Nonwoven
Functional layer
UV-protection
• Water vapour tight
• IR Heat reflection
• Tear resistant
• Gas barrier (methane, radon,…)
• Water vapour open
• Wind tight
• Weight-bearing during installation
• Temperature resistant
Insulaid®
Non-breathable Ventilaid®
Breathable
Mondi Extrusion Coatings
Mondi Extrusion Coatings produces high-quality, cost- and energy-efficient solutions for multiple applications in a broad range of industries such as building, foam papers, industrial paper and packaging, food as well as other special applications.Our advanced extrusion coating technology enables us to produce a wide range of material combinations leading to new and innovative products. Our broad knowledge of different markets stimulates a creative cross-fertilisation culture, inspiring new materials such as the Insulaid® and Ventilaid® building products collection. These construction materials are smart and efficient solutions for insulating new and existing building projects.
Polyurethane foam
Lacquer
Aluminium
Adhesive or Polymer
Kraft paper
PolymerAluminiumPolymer
Aged assured
Emissivity
Gastightness
Good foam adhesion
Dimensional stability
Properties depending on requirements and application
Insulaid® Facers – Leading to top insulation performance