vel tech high tech dr.rangarajan dr.sakunthala … - 2019 issue... · 2020-02-10 · department of...

VEL TECH HIGH TECH Dr.RANGARAJAN Dr.SAKUNTHALA

ENGINEERING COLLEGE

DEPARTMENT OF MECHANICAL ENGINEERING

HORIZON NEWSLETTER

October 2018 - December 2018 ISSUE 2 VOL 7

Department of Mechanical Engineering

Department of Mechanical Engineering HORIZON Issue 2, Volume 7

2

Department of Mechanical Engineering Newsletter © Vel Tech High Tech Dr. Rangarajan Dr. Sakunthala Engineering College, Chennai

Chief Editor:

M.Muralidharan, Asst Professor, Mech.

Associate Editor:

A.Arun, Asst Professor, Mech. Editorial Board:

Anderson Blesswin P, VH7376, IV Mech. Jeffrin Jen.J, VH 8086, III Mech.

Pon Palani Kiran.B, VH 8719, II Mech. Vignesh.S, VH 8771, II Mech.


3

Principal Message

It is pleasure to present the quarterly issue of the Newsletter of Vel Tech High

Tech Dr.Rangarajan Dr.Sakunthala Engineering College for the year 2018-2019. I

am very happy to meet you through this page. Vel Tech High Tech has stood above

the rest in its approach to education and in its pedagogies. The ways we teach and

the ways our students learn are unique and creative. Education is not an act of

acquiring knowledge but learning a skill to lead life and forming one’s personality.

Many constructive efforts have been taken to improve our college results. As

campus placements are progressing, efforts to groom the students to serve the

society are also in pace. I wish to record my hearty congratulations to those who

have brought laurels to the institution and I appreciate all of you for working

together as a team for the success of this “Department of Mechanical Engineering

Newsletter”.


4

Outcome Based Education (OBE)

Education forms the back bone of any country. System of Education reveals

the quality. As we know India has a population that is the youngest in world and by

2020 we will have youngsters in the age of 21-24 who will be at the start of their

career, looking for good opportunities. But, in recent years in our country we have

seen a sharp decline in the employability of students graduating from technical

education, which proves to be a potential threat for a nation that has youngest

population.

Lot of initiatives that were taken to improve that quality of students, but those

gave little or no improvement. Based on lot of analysis Government identified that

the students lacked the potential skills and knowledge that are required for

employability or for pursuing higher education.

To bring improvement in the quality of education Indian Government signed

and became a permanent member of the “WASHINGTON ACCORD” on 13th June

2014, and started bringing reform under the initiative “OUTCOME BASED

EDUCATION”.

Understanding this impact and having extreme concerns over the quality of

students graduating and also the quality of graduates that we must produce for our

nation, we at our institution unanimously decided to follow the OUTCOME BASED

EDUCATION, to produce graduates who will bring up the nation and who will

shoulder great responsibilities in the near future.

OBE as the name indicates concentrates on the improvement of the

“outcomes or the required skills and knowledge” that a sudden must have at the

time of graduating. We at our institution and in turn in our school take serious

concern in attaining the attributes defined globally for the graduates. Each program

and the courses in a program are decided and also designed to give specific skills

required to enhance the quality.

Therefore, in our institution various skill development activities initiated by

our Principal Dr.E.Kamalanaban are being conducted in a way to aid the cause of

improvement.


5

INSTITUTION VISION AND MISSION VISION

❖ Pursuit of excellence in technical education to create civic responsibility with

competency.

MISSION

❖ To impart the attributes of global engineers to face industrial challenges with

social relevance.

❖ To indoctrinate as front runners through moral practices.

❖ To attain the skills through lifelong learning.

DEPARTMENT OF MECHANICAL ENGINEERING

VISION

❖ To produce industry ready, innovative and creative Mechanical Engineers to meet societal challenges with moral values and research knowledge.

MISSION

❖ To impart high quality of Mechanical Engineering knowledge to students and enhance their skills to fit for industrial practices.

❖ To inspire dynamic potential minds to think innovatively and involve them in

research and consultancy. ❖ To confer the right extent of morals, ethical values and lifelong learning to

empower the general public and to make noteworthy commitments.

Program Educational Objectives (PEOs) On completion of the programme, our students will,

PEO1— Design, develop and establish newer mechanical system using emerging techniques such as ANSYS, 3D Printing and Smart Materials to enhance the

productivity with international standards. PEO2— Provide sustainable, cost effective and eco-friendly methodologies for

improving existing Mechanical system.

PEO3— Use modern analysis and design tools such as CATIA, ANSYS and Solid Works, to enhance quality in Mechanical Engineering domain.


6

Programme Specific Program Outcomes (PSO) By the time of graduation, Mechanical Engineering students can

PSO1— Apply fundamental knowledge in mathematics, science and engineering for contributing to higher studies, teaching profession, research activities, and

development of mechanical engineering and allied fields.

PSO2— Apply computational methods and analytical techniques for planning and analyzing mechanical engineering real life problems, designing the safe, economic and managing technical activities involved in mechanical engineering and allied

projects.

PSO3— Exhibit ethics in collaboration with other members of multi-domain

professional teams for the development of national sustainability.

WORKSHOPS

Workshop No 1: Employment Opportunities in Production Sector

Date: 16th Oct 2018

Resource Person: Dr. Shanmugam.T.,

❖ The Department of Mechanical Engineering conducted a Workshop on 16th

October 2018 on the topic “Employment Opportunities in Production Sector”

by Dr.Shanmugam.T, President and Founder, Tamilnadu skill providers and

Youth Federation– Chennai – 54. He explained the advance technology in

production system in OEM and production based courses and explained the

types of industries and opportunities in manufacturing sector.


7

Faculty Development Program 1: FEA using ANSYS, Solid works & Mastercam

Date: 29th September 2018

Resource Person: Mr.Karthikeyan.S.,

❖ The Department of Mechanical Engineering conducted five days Faculty

Development Training Program from 13th December 2018 – 18th December

2018 on the topic of “Finite Element Analysis using ANSYS workbench and

Solid works simulation & Smart Manufacturing skill development using

master CAM”. Sixty two faculty members from various colleges across

Chennai participated in this program.

❖ Mr. Karthikeyan. S., Technical & Project Head, CADD CAMM SOLUTIONS,

Avadi – Chennai – 54, explained and gave hands on training in FEA using

ANSYS workbench 2018 and solid work simulation for the first 3 days.

❖ Mr.Saravanan., Solid Work Solutions, Chennai, explained and gave hands on

training on FEA using Solid works & Smart manufacturing skill development

using Mastercam software for the last two days.


8

STUDENTS CORNER

CONFERENCES AND SEMINARS

S.NO VH NO

Name Semester Conference/Seminar Title

Hosted by Date and Venue

1. 8740 B.S.Dinesh 3 YUVA SERVE Anna University, Guindy

13.10.2018

INPLANT TRAININGS

S.No Name of the Student Vh No INPLANT Period

1 C.Manoj Kumar 8710

Kaashiv Infotech

6/12/18 to 10/12/18

2 M.Manoj 8711

3 S.Manova 8712

4 Mukesh Khannan 8714

5 C.G.Logesh 8708 Nagercoil Bus Factory

23/11/18 to 30/11/18

6 R.S.Manish Prakash 23/11/18 to 30/11/18

7 K.R.Elauchezhian 8769 HNGIL Puducherry 8/12/18 to 13/11/18

8 M.Aakash 8691

Diesel Loco Shed

12/12/18 to 18/12/18

9 B.Balaji 8763

10 M.Barath 8776

11 P.Bharathi 8764

12 S.Bharath Kumar 8768

13 Dinesh .B.S 8740

14 T.Bharath Kumar 8794

15 M.Madhan Rajesh 8709

16 V.S. Armanneuil Raj 8695 Star Drive Ltd.

1/12/18 to 10/12/18

17 P.Naveen Kumar 8715

20 K.Gokul 8700

ICF

4/12/18 to 11/12/18 21 M.R.Hitesh Raj 8705

22 M.R.Keerthan 8707

24 A.Alex BerylRaj 8693 SRF

28/11/18 to 4/12/18

25 S.Deepak Raj 8696

26 R.Thameemgani 8734

Falcon Technologies

11/12/18 to 15/12/18

27 Vaideeswary.S 8748

28 S.Niveditha 8717

29 S.SaranRaj 8728

30 S.Sudhakar 8732

31 L.Santhosan 8727

32 M.Shree Ram 8730

34 S.Rajesh 8725 Uniq Technologies 25/11/18 to 4/12/18


9

35 G.Prabunath 8721 Uniq Technologies 25/11/18 to 4/12/18

36 D.Praveen Kumar 8746 Sahithya Engineering

Solutions 27/11/18 to 10/12/18

INTERNSHIP

Sl.no Year Name Company

name Period Impact Observed

1

II

S.R.AKASHRAJA

KRS

ARGOTECH

Irrigation

09.12.2018

TO

19.12.2018

It will help for students to do

their design and fabrication

project or final year project in

sheet metal process.

2 LOGESH.C.G

3 MANOJ.M

4 NAVIN.E

5 ROHIT.M

6 II S.B.CHANDRA KUMAR Ganesh Benzo

Plast .Ltd

01.12.2018

TO

10.12.2018

Provides valuable practical

experience in mechanical

engineering field.

7 II ANISH.K.MATTEWS Wheels India

Ltd.

03.12.2018

TO

15.12.2018

It also encourages students in

participating various vehicles

competition conducted by

professional societies like SAE

E- Baja, Mega ATV, ESVC, etc

FACULTY CORNER

FACULTY PARTICIPATION IN WORKSHOP

S.No HTS No.

Name Date Title of the Workshop Place

1 815 N.KARTHICK

16.10.2018

A workshop on Manufacturing sector by

TN skill providers & Youth development

Federation

Veltech Hightech Dr.RR Dr.SR Engineering College,

Avadi

2 696

Dr.

K.ARUMUGAM 16.10.2018

A workshop on

Manufacturing sector by

TN skill providers &

Youth development

Federation

Veltech Hightech Dr.RR

Dr.SR Engineering College,

Avadi

3 1291 Dr. R.SURESH

16.10.2018

A workshop on






10

Youth development

Federation

Avadi

4 1286

Dr.

R.ANBAZHAGAN 16.10.2018

A workshop on



Youth development

Federation



Avadi

5 1287

Dr.

V.SATHYAMOOR

THY 16.10.2018

A workshop on



Youth development

Federation



Avadi

6 1391

DR.NAGASANKA

R 16.10.2018

A workshop on



Youth development

Federation



Avadi

7 723

S.RAJAMANICKA

M 16.10.2018

A workshop on



Youth development

Federation



Avadi

8 797 T.V.B.BABU

16.10.2018

A workshop on



Youth development

Federation



Avadi

9 877 R.PALANI

16.10.2018

A workshop on



Youth development

Federation



Avadi

10 725 N.GAYATHRI

16.10.2018

A workshop on



Youth development

Federation



Avadi

11 934 NAGENDRAN N

16.10.2018

A workshop on



Youth development

Federation



Avadi

12 1011 ARAVINDH.S

16.10.2018

A workshop on






11

Youth development

Federation

Avadi

13 1072 MARIYAPPAN.K

16.10.2018

A workshop on



Youth development

Federation



Avadi

14 1076

S.SATHEESHKU

MAR 16.10.2018

A workshop on



Youth development

Federation



Avadi

15 1073

M.MURALIDHAR

AN 16.10.2018

A workshop on



Youth development

Federation



Avadi

16 1089 R.PRASANTH

16.10.2018

A workshop on



Youth development

Federation



Avadi

17 1101

R.MANJUNATHA

N 16.10.2018

A workshop on



Youth development

Federation



Avadi

18 1255 E.PRAKASH

16.10.2018

A workshop on



Youth development

Federation

Veltech Hightech Dr.RR Dr.SR Engineering College, Avadi

19 1265 A.ARUN

16.10.2018

A workshop on



Youth development

Federation


20 1340 D.BALAJI

16.10.2018

A workshop on Manufacturing sector by

TN skill providers & Youth development

Federation


Avadi

21 696

Dr.

K.ARUMUGAM 17.11.2018 Art of writing Funding proposal & Research

article

Kings Engineering College, Sriperumbadur

22 1291 Dr. R.SURESH

17.11.2018 Art of writing Funding proposal & Research



12

article

23 1286

Dr.

R.ANBAZHAGAN 17.11.2018 Art of writing Funding proposal & Research

article


24 1287

Dr.

V.SATHYAMOOR

THY 17.11.2018

Art of writing Funding proposal & Research

article


25 1391

DR.NAGASANKA

R 17.11.2018 Art of writing Funding proposal & Research

article


26 1011 ARAVINDH.S

17.11.2018 Art of writing Funding proposal & Research

article


27 1101

R.MANJUNATHA

N 17.11.2018

Art of writing Funding

proposal & Research article

Kings Engineering College,

Sriperumbadur

FACULTY DEVELOPMENT PROGRAM

S.No

HTS No. Name Date Title of FDP Place

1 815 N.KARTHICK 13.12.2018-

18.12.2018

Finite Element Analysis

using ANSYS workbench

and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM


Avadi

2 696 Dr. K.ARUMUGAM 13.12.2018-

18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM



Avadi

3 1291 Dr. R.SURESH 13.12.2018-

18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM



Avadi

4 1286

Dr.

R.ANBAZHAGAN 13.12.2018- 18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using



Avadi


13

master CAM

5 1287

Dr.

V.SATHYAMOORT

HY

13.12.2018- 18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM



Avadi

6 1391 DR.NAGASANKAR 13.12.2018-

18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM



Avadi

7 723

S.RAJAMANICKA

M 13.12.2018- 18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM



Avadi

8 797 T.V.B.BABU 13.12.2018-

18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM



Avadi

9 877 R.PALANI 13.12.2018-

18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM



Avadi

10 725 N.GAYATHRI 13.12.2018-

18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM



Avadi

11 934 NAGENDRAN N 13.12.2018-

18.12.2018



and Solid works



Avadi


14

simulation & Smart

Manufacturing skill

development using

master CAM

12 1011 ARAVINDH.S 13.12.2018-

18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM



Avadi

13 1072 MARIYAPPAN.K 13.12.2018-

18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM



Avadi

14 1076

S.SATHEESHKUM

AR 13.12.2018- 18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM



Avadi

15 1073

M.MURALIDHARA

N 13.12.2018- 18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM



Avadi

16 1089 R.PRASANTH 13.12.2018-

18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM



Avadi

17 1101 R.MANJUNATHAN 13.12.2018-

18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM



Avadi


15

18 1255 E.PRAKASH 13.12.2018-

18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM


Dr.SR Engineering College, Avadi

19 1265 A.ARUN 13.12.2018-

18.12.2018



and Solid works

simulation & Smart

Manufacturing skill

development using

master CAM


20 1340 D.BALAJI 13.12.2018-

18.12.2018

Finite Element Analysis using ANSYS workbench

and Solid works simulation & Smart Manufacturing skill development using

master CAM


Avadi

vel tech high tech dr.rangarajan dr.sakunthala … - 2019 issue... · 2020-02-10 · department of...

Documents