various manual gun models available. possible to … · 2013. 10. 22. · various manual gun models...
TRANSCRIPT
VARIOUS MANUAL GUN MODELS AVAILABLE. POSSIBLE TO CHOOSE A PRODUCT TO MEET THE NEED.
MANUAL POWDER COATING EQUIPMENTS
ELECTRO STATIC POWDER COATING EQUIPMENT
GX8500 SERIES MANUAL GUN MODEL
IONICS DEPT.
GX8500CS Cup Stand Unit
GX8500C Cup Gun Unit
GX8500S-TTwin Hand Gun Unit(GX8500B-T and GX8500K-T Available.)
GX8500SStandard Unit of Manual Type
GX8500B Unit for Multicolor Powder
GX8500K Agitator Type Unit(Small Output Available.)
Unit Type GX8500S/GX8500S-T GX8500B/GX8500B-T GX8500K/GX8500K-T GX8500CS/GX8500C
Equipped Gun GX131 GX131 GX131 GX131
Powder Feeder Fluidized Bed Hopper Powder Box Agitator Hopper Cup
Hopper Capacity 60 Lit. - 30 Lit 380cc/500cc
Gun Cable Length 7 m (Connectors on both sides) 7 m (Connectors on both sides) 7 m (Connectors on both sides) 7 m (Connectors on both sides)
Max. 250 g/min. (Hose I.D. 9.5 mm) Max. 250 g/min. (Hose I.D. 9.5 mm) Max. 250 g/min. (Hose I.D. 9.5 mm) Max. 250 g/min. (Hose I.D. 9.5 mm) Max. 450 g/min. (Hose I.D. 12mm) Max. 450 g/min. (Hose I.D. 12mm) Max. 450 g/min. (Hose I.D. 12mm) Max. 450 g/min. (Hose I.D. 12mm)
Dimensions (W × L × H) 600 × 743 × 1070(mm) 600 × 743 × 1070(mm) 685 × 500 × 1110(mm) 200 × 200 × 250(mm)Equip. Weight 45 kg/ 51 kg 47 kg/ 53 kg 56 kg / 62 kg 10 kg / 8 kg
Power Consumption 90 VA 120 VA 140 VA 90 VA
100VAC - 240 VAC, 50/60 Hz 100VAC - 240 VAC, 50/60 Hz 100VAC - 240 VAC, 50/60 Hz 100VAC - 240 VAC, 50/60 Hz
180 Nlit/min, 0.5 MPa 150 Nlit/min, 0.5 MPa 140 Nlit/min, 0.5 MPa CS: 200 Nlit/min, 0.5 MPa,
C: 140 Nlit/min., 0.5 MPa
Maximum PowderOutput
Power Requirements
Air Consumption/Pressure
NIHON PARKERIZING CO., LTD. IONICS DEPT.● Informations in this catalogue is subject to change without notice. ● Please read the manual before using the equipment and use the equipment properly.
IONICS DEPT.14-6, Sakaecho 2 chome, Funabashi-shi, Chiba, 273-0018, Japan TEL. +81-47-434-5008 FAX. +81-47-434-3732HIGASHI NIHON SALES - IONICS TESTING LABORATORY14-6, Sakaecho 2 chome, Funabashi-shi, Chiba, 273-0018, Japan TEL. +81-47-434-3745 FAX. +81-47-434-3732NISHI NIHON SALESHiroshibacho 11-41, Suita-shi, Osaka, 564-0052, Japan TEL. +81-6-6386-3584 FAX. +81-6-6386-3340CHUKYO BRANCHMomozonocho 4-18, Mizuho-ku, Nagoya-shi, Aichi, 467-0855, Japan TEL. +81-52-388-7013 FAX. +81-52-824-1803OVERSEAS MARKETING14-6, Sakaecho 2 chome, Funabashi-shi, Chiba, 273-0018, Japan TEL. +81-47-434-5061 FAX. +81-47-434-3732
1205500EX
Design for preventing puffing. Simple construction makes easy cleaning.
High Performance Injector
Easy to replace gun cable due to having a connector at the both ends.
Gun Cable
StandardPinch Valve
Adjusting powder output on hand.
Remote Control Switch
Option
It improves the response of ON/OFF and makes Air Cleanig quick.
GX8500 SERIES
Comparison of Charge to mass ratio
Pulse Ⅱ charge
Continuously charge (other company method)
Powder Output (g/min.)
Charge to mass ratio(uC/g)
35025015050 3002001000
400
250
100
350
200
50
300
150
0
GX385 DIGITAL CONTROLLER
Clear LED Indicator, Excellent operability.
Current / pressure feedback control comes true the stable coating.
New software makes max. 50 recipes, stable operation and speed-up possible.
Pulse Power Ⅱ makes Excellent Penetration possible.
Easy to operate withdirect switch
One touch programselect switch
Pulse Power/Standard Corona select switch
Built-in Pressure Sensor
Switchable Flow rate control / Pressure control
With Ion trap (option) makes coating decorative
< Pulse PowerPatent is registered.>
High Voltage Source Generator built in gun main body
Input Voltage Max. 24V (Effective Value)Applied Voltage Max. 100kV (Polarity : Negative)
Short Circuit Current 100μAWeight 520g Bottom of the gun
Gun Grip 2 sizes availble to choose
Excellent penetration for corner of inside box.
Less powder blowing off even if spraying from close position.
Less powder accumulation on the Bottom of inside box.
Easy to replace gun cable due to having a connector at the both ends.
GX131 ELECTRO STATIC POWDER COATING GUN
K type Nozzle
Long Barrel Nozzle
Option Nozzle
It is suitable for painting narrow parts due to the fixed pattern.
Slit Nozzle (ET) Spray pattern looks like fan shape. Excellent Penetration.
Adjustable spray pattern with moving the ring position.
Slit Nozzle
Pattern Ring (option)
Diffuser (option)
Round spray pattern is formed. Diameter of spray pattern can be adjusted with the different diffuser (option).
Diffuser Nozzle
GX131 Nozzles
Standard : O.D. 16mm
φ22φ20φ10
116L300L500L
1000L
It is possible to spray close toa part due to soft spray.
It is suitable for coating for inside of boxes, inside of pipes.
Connecting Position for Gun Cable and Powder Hose
Gun NozzleSlit Nozzle, Diffuser NozzleOption : Long Barrel Nozzle
※ in case of output 100% when the primary air pressure is 0.5 MPa
Primary Air Pressue(MPa)
Output(%)
0.60.50.4 0.650.550.450.35
120
105
90
115
100
85
110
95
80
Total Air Volume Control
PowderFM + FS
SettingIndicator feedback control
FM Motor Valve
FS Motor Valve
FM + FS = Fixed
controller
FS Pressure Sensor
FM Pressure Sensor
Primary Pressure Variation and OutputGX385 Pressure Control
Tipical Regulator