variables - general description & selection tables

Upload: ateeb-ansari

Post on 04-Jun-2018

227 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/13/2019 Variables - General Description & Selection Tables

    1/12

    GENERAL

    Variable spring supports are used for supporting This full travel may be used provided the necessary calculations

    pipework, vessels, columns and pipe connections to are carried out to ensure that the pipework and

    large tanks, that are subject to thermal movement nozzle connections can withstand the large changes

    and/or subsidence. that occur during pipe movement.

    They are used when it is not possible to use rigid hangers Most international standards advise a maximum load

    and Constant effort spring supports would be variation of 25%, it is therefore recommended to select

    uneconomical a variable effort spring support on this basis. Careshould always be taken to ensure that the selected unit

    For small vertical movements up to about 75mm the has sufficient travel available to permit the free vertical

    variable effort spring support is recommended. The Binder movement of the pipe when moving from the cold to hot

    G roup manufac tures four basic travel range units. position.

    These are BV35, BV70, BV140 and BV210 and have a

    maximum working range of 35mm, 70mm, 140mm and In keeping with generally accepted practice, we recommend

    210mm respectively. that the pipe load is correctly supported when the

    pipe is in its normal working position. This ensures that

    no abnormal or excessive forces, due to out of balance

    supporting effort, is transferred to the pipework in its

    stressed working condition.

    STANDARD DESIGN

    All units are easily adjusted, Types A, B, C and G

    being supplied with a Turnbuckle built into the unit.

    Type F units use a threaded load column.

    Carbon Steel construction with Stainless Steel scale plate.

    Ideally suited for highly corrosive environments such

    as Offshore and Refining installations. Standard

    design allows surface protection system on all internal

    and external surfaces limiting potential corrosion.

    Scale plate fitted with Hot (Red) and Cold (Blue)

    load indicators.

    VARIABLE SPRING SUPPORTS BV35, BV70, BV140, BV210

    PERTH MELBOURNE BRISBANE SINGAPORE JAKARTA

    WWW.BINDERGRP.COM 85

  • 8/13/2019 Variables - General Description & Selection Tables

    2/12

  • 8/13/2019 Variables - General Description & Selection Tables

    3/12

  • 8/13/2019 Variables - General Description & Selection Tables

    4/12

  • 8/13/2019 Variables - General Description & Selection Tables

    5/12

  • 8/13/2019 Variables - General Description & Selection Tables

    6/12

  • 8/13/2019 Variables - General Description & Selection Tables

    7/12

  • 8/13/2019 Variables - General Description & Selection Tables

    8/12

    Variable Spring SupportsBV35-BV70-BV140-BV210

    PERTH MELBOURNE BRISBANE SINGAPORE JAKARTA 92

  • 8/13/2019 Variables - General Description & Selection Tables

    9/12

  • 8/13/2019 Variables - General Description & Selection Tables

    10/12

  • 8/13/2019 Variables - General Description & Selection Tables

    11/12

  • 8/13/2019 Variables - General Description & Selection Tables

    12/12