vanjax hydraulics distributor in chennai
TRANSCRIPT
VXHPB - T 9
VXHPB -
VXHPB - T 9 RC
T 21
HYDRAULIC PIPE BENDER - HAND OPERATED - TRIPOD MODEL
PIPE BENDER - MECHANICAL
VXMPB - 25
MOTORISED PIPE BENDER - SPECIAL PURPOSE- MULTI FUNCTIONTYPE VXMPB - SP - MF (1½”-5/8”)
MAXIMUM PIPE SIZE (mm.) Ø 40 40 x 40 x 1 30 x 30
BENDING FORMERS (mm. In.) Ø40(1½”) Ø32(1¼”) Ø25(1”) Ø16(5/8”)
BENDING ANGLE a<180°
ROTATE SPEED OF MAIN SHAFT (r/min.) 1400
MOTOR-POWER/ VOLTAGE/ FREQUENCY 3 KW / 220/380 V / 50 Hz
VOLUME (cm.) 80 x 60 x 100
WEIGHT (approx.) 300 kgs.
VXMPB-SP-MF (1½”-5/8”)
HYDRAULIC MOTORISED PIPE BENDER - FLOOR MODEL
VXHPB - F 9 M
HYDRAULIC PIPE BENDER - REMOTE CONTROL - TRIPOD MODELTYPE VXHPB - T 9 RC VXHPB - T 21 RC
CAPACITY 9 Ton. 21 Ton.
MAXIMUM STROKE 250 mm. 370 mm.
CRIMP RANGE (mm.) Ø 21.3 - Ø 60 mm. Ø 21.3 - Ø 108 mm.
BENDING FORMERS (inch) ½” ¾” 1” 1¼” 1½” 2” ½” ¾” 1” 1¼” 1½” 2” 2½” 3” 4”
PIPE WALL THICKNESS 2.75 mm. - 4.5 mm. 2.75 mm. - 6 mm.
VOLUME (cm.) 73 x 32 x 20 118 x 46 x 23
WEIGHT (approx.) 50 kgs. 157 kgs.
TYPE VXHPB - T 9 VXHPB - T 21
CAPACITY 9 Ton. 21 Ton.
MAXIMUM STROKE 250 mm. 370 mm.
CRIMP RANGE (mm.) Ø 21.3 - Ø 60 mm. Ø 21.3 - Ø 108 mm.
BENDING FORMERS (inch) ½” ¾” 1” 1¼” 1½” 2” ½” ¾” 1” 1¼” 1½” 2” 2½” 3” 4”
WALL THICKNESS OF PIPE 2.75 mm. - 4.5 mm. 2.75 mm. - 6 mm.
VOLUME (cm.) 73 x 32 x 20 118 x 46 x 23
WEIGHT (approx.) 53 kgs. 200 kgs.
TYPE VXHPB- F 9 M VXHPB - F 21 M
CAPACITY 9 Ton. 21 Ton.
MAXIMUM STROKE 250 mm. 370 mm.
CRIMP RANGE (mm.) Ø 21.5 - Ø 60 mm. Ø 21.5 - Ø 108 mm.
BENDING FORMERS (inch) ½” ¾” 1” 1¼” 1½” 2” ½” ¾” 1” 1¼” 1½” 2” 2½” 3” 4”
WALL THICKNESS OF PIPE 2.75 mm. - 4.5 mm. 2.75 mm. - 6 mm.
VOLUME (cm.) 96 x 35 x 27 118 x 46 x 32
WEIGHT (approx.) 70 kgs. 170 kgs.
TYPE VXMPB - 25
CRIMP RANGE (mm.) Ø 10 - Ø 25 mm.
BENDING FORMERS (mm) 10, 12, 14, 16, 19, 22, 25 mm
WALL THICKNESS OF PIPE 0.8 mm. - 2.0 mm.
VOLUME (cm.) 65 x 20 x 16
WEIGHT (approx.) 24 kgs.
VXHPB - F 21
VXMPB - 23 VXMPB - 24(Special reverse direction
bending function) MECHANICAL PIPE BENDER - MANUAL - FLOOR MODELTYPE VXMPB - 23 VXMPB - 24
CRIMP RANGE (mm.) Ø 6 - Ø 22 mm. Ø 6 - Ø 22 mm.
BENDING FORMERS (inch.) ¼”,5/16”,3/8”,½”,5/8”,¾”,7/8” ¼”,5/16”,3/8”,½”,5/8”,¾”,7/8”
BENDING FORMERS (mm.) 6, 8, 10, 12, 16, 19, 22 6, 8, 10, 12, 16, 19, 22
PIPE WALL THICKNESS 1.0 mm. 1.0 mm.
PACKING (cm.) (1/5) 52 x 31 x 40 (1/5) 52 x 31 x 40
WEIGHT (approx.) 4.5 kgs. 5.1 kgs.
HYDRAULIC PIPE BENDER - MANUAL - FLOOR MODELTYPE VXHPB -F 9 VXHPB - F 21
CAPACITY 9 Ton. 21 Ton.
MAXIMUM STROKE 250 mm. 370 mm.
CRIMP RANGE (mm.) Ø 21.3 - Ø 60 mm. Ø 21.3 - Ø 108 mm.
BENDING FORMERS (inch) ½” ¾” 1” 1¼” 1½” 2” ½” ¾” 1” 1¼” 1½” 2” 2½” 3” 4”
PIPE WALL THICKNESS 2.75 mm. - 4.5 mm. 2.75 mm. - 6 mm.
VOLUME (cm.) 73 x 32 x 20 118 x 46 x 23
WEIGHT (approx.) 60 kgs. 200 kgs.
VXMPB - SP (16-76mm)
HYDRAULIC LOW LIFT JACKS
VXHPB - F 9
MOTORISED PIPE BENDER - SPECIAL PURPOSE
REMARKS: If you want to bend pipes into a circular or arc shape, the diameter of the circle or arc should be more than twenty times of the pipe diameter
TYPE CAPACITY( Ton )
STROKE( mm. )
CLOSED HEIGHT
OIL CAPACITY
VOLUME( cm. )
WEIGHT(approx.)
VXRC - LL -10 / 11 10 11 45 mm. 16 cc. 15 x 6.5 x 5 1.5 kgs.
VXRC - LL -20 / 12 20 12 52 mm. 34 cc. 16.5 x 8.5 x 6 2.6 kgs.
VXRC - LL -30 / 14 30 14 58 mm. 58 cc. 18.5 x 10 x 6.5 3.9 kgs.
VXRC - LL -50 / 16 50 16 68 mm. 102 cc. 21 x 12 x 7.5 6.3 kgs.
VXRC - LL -100 / 16 100 16 88 mm. 200 cc. 25 x 17 x 10 14.5 kgs.
HYDRAULIC LOW LIFT JACKS - MULTI STAGE CYLINDERS
TYPE CAPACITY( Ton )
STROKE( mm. )
CLOSED HEIGHT
OIL CAPACITY
VOLUME( cm. )
WEIGHT(approx.)
VXRC-LL-10 / 25-TL 10 25 45 mm. 22 cc. 15 x 6.5 x 5 1.4 kgs.
VXRC-LL-20 / 26-TL 20 26 52 mm. 41 cc. 16.5 x 8.5 x 6 2.5 kgs.
VXRC-LL-30 / 53-TL 30 53 58 mm. 67 cc. 18.5 x 10 x 6.5 4.1 kgs.
VXRC-LL-50 / 64-TL 50 64 68 mm. 113 cc. 21 x 12 x 7.5 6.4 kgs.
VXRC-LL-100 / 68-TL 100 68 88 mm. 225 cc. 25 x 17 x 10 14.5 kgs.
TYPE VXMPB - SP (16-76mm)
CRIMP RANGE (mm.) Ø 16 - Ø 76 mm.
ROUND FORMERS (mm) 16, 19, 22, 25, 32, 38, 51, 63, 76
SQUARE FORMERS (mm) 16, 19, 22, 25, 30, 38, 40, 50
PIPE WALL THICKNESS 0.5 ~ 2.0 mm.
MOTOR ( v ) 220 / 380 v
VOLUME (cm.) 73 x 63 x 102
WEIGHT (approx.) 260 kgs.
HYDRAULIC REMOTE CONTROL JACKS
TYPE CAPACITY( Ton )
STROKE( mm. )
CLOSED HEIGHT
OIL CAPACITY
VOLUME( cm. )
WEIGHT(approx.)
VXRC - 10 / 100 10 100 145 mm. 145 cc. 15 x 10.5 x 15 4.5 kgs.
VXRC - 10 / 150 10 150 225 mm. 217 cc. 13.5 x 10.5 x 23.5 7 kgs.
VXRC - 20 / 100 20 100 165 mm. 282 cc. 18.5 x 13 x 18 7.5 kgs.
VXRC - 20 / 150 20 150 225 mm. 423 cc. 16.5 x 13 x 24.5 11 kgs.
VXRC - 30 / 100 30 100 165 mm. 418 cc. 19 x 14 x 17.5 9 kgs.
VXRC - 30 / 150 30 150 230 mm. 627 cc. 16 x 14 x 24 15 kgs.
VXRC - 50 / 100 50 100 170 mm. 635 cc. 20 x 13 x 19 13 kgs.
VXRC - 50 / 150 50 150 245 mm. 953 cc. 18 x 16 x 26.5 18 kgs.
VXRC - 100 / 100 100 100 235 mm. 1246 cc. 25 x 25 x 26 34 kgs.
VXRC - 100 / 150 100 150 285 mm. 1869 cc. 25 x 25 x 31 40.5 kgs.
VXRC - 200 / 100 200 100 235 mm. 2543 cc. 33 x 31 x 27 73 kgs.
VXRC - 200 / 150 200 150 316 mm. 3810 cc. 33 x 31 x 32 82 kgs.
HYDRAULIC DOUBLE ACTING CYLINDERS
HYDRAULIC HOLLOW PLUNGER CYLINDER
HYDRAULIC REMOTE CONTROL JACKS - SCREWED RAM WITH SAFETY LOCK NUT
TYPE CAPACITY( Ton )
STROKE( mm. )
CLOSED HEIGHT
WEIGHT(approx.)
VXRC- DA- 10 / 250 10 250 405 mm. 12 kgs.
VXRC- DA- 10 / 300 10 300 455 mm. 13 kgs.
VXRC- DA- 20 / 250 20 250 405 mm. 15 kgs.
VXRC- DA- 20 / 300 20 300 455 mm. 17 kgs.
VXRC- DA- 30 / 200 30 200 390 mm. 19 kgs.
VXRC- DA- 30 / 300 30 300 490 mm. 24 kgs.
VXRC- DA- 50 / 200 50 200 390 mm. 29 kgs.
VXRC- DA- 50 / 300 50 300 490 mm. 36 kgs.
VXRC- DA- 100 / 200 100 200 390 mm. 52 kgs.
VXRC- DA- 100 / 300 100 300 490 mm. 58 kgs.
TYPE CAPACITY( Ton )
STROKE( mm. )
CLOSED HEIGHT
CENTRE BORE
VOLUME( cm. )
WEIGHT(approx.)
VXRCHO - 20 / 50 20 50 160 mm. 27 mm. 18 x 12 x 20 7.7 kgs.
VXRCHO - 20 / 100 20 100 210 mm. 27 mm. 15 x 11 x 22 9.5 kgs.
VXRCHO - 30 / 50 30 50 180 mm. 32 mm. 16.5 x 12 x 19.5 10.3 kgs.
VXRCHO - 30 / 100 30 100 230 mm. 32 mm. 17 x 12 x 24.5 13 kgs.
VXRCHO - 60 / 50 60 50 245 mm. 53 mm. 25 x 25 x 28 28.1 kgs.
VXRCHO - 60 / 100 60 100 295 mm. 53 mm. 25 x 25 x 33 38 kgs.
VXRCHO - 100 / 75 100 75 255 mm. 80 mm. 31 x 31 x 28 54.5 kgs.
TYPE CAPACITY( Ton )
STROKE( mm. )
CLOSED HEIGHT
WEIGHT(approx.)
VXRC- SR- 10 / 100 10 100 210 mm. 6.5 kgs.
VXRC- SR- 10 / 150 10 150 260 mm. 8 kgs.
VXRC- SR- 20 / 100 20 100 210 mm. 9.5 kgs.
VXRC- SR- 20 / 150 20 150 260 mm. 13 kgs.
VXRC- SR- 30 / 100 30 100 210 mm. 12 kgs.
VXRC- SR- 30 / 150 30 150 260 mm. 17 kgs.
VXRC- SR- 50 / 100 50 100 210 mm. 20 kgs.
VXRC- SR- 50 / 150 50 150 260 mm. 25 kgs.
VXRC- SR- 100 / 100 100 100 237 mm. 39 kgs.
VXRC- SR- 100 / 150 100 150 287 mm. 47 kgs.
VXRC- SR- 150 / 100 150 100 259 mm. 66 kgs.
VXRC- SR- 150 / 150 150 150 309 mm. 79 kgs.
VXHCT-142
VXHCT-8
HYDRAULIC REMOTE CONTROL -LIGHT WEIGHT (ALUMINIUM) CYLINDERS
VXHCT-161(with automatic safety device)
VXHCT-162
HYDRAULIC CRIMPING TOOLS
VXHCT-143(with automatic safety device)
VXHCT-121(with automatic safety device)
VXHCT-123(with automatic safety device)
VXHCT-122
VXHCT-100
VXHCT-45
VXHCT-20
VXHCT-25
HYDRAULIC CRIMPING TOOLS
VXHCT-141 RC
HYDRAULIC CRIMPING TOOLS
VXHCT-201 RC
TYPE CAPACITY( Ton )
STROKE( mm. )
CLOSED HEIGHT
WEIGHT(approx.)
VXRC- LW- 10 / 150 10 150 250 mm. 3.3 kgs.
VXRC- LW- 20 / 150 20 150 260 mm. 5.6 kgs.
VXRC- LW- 30 / 150 30 150 265 mm. 7.5 kgs.
VXRC- LW- 50 / 150 50 150 270 mm. 12 kgs.
VXRC- LW- 100 / 150 100 150 275 mm. 22.9 kgs.
TYPE MAX.PRESSURE
MAX.STROKE
CRIMP RANGE SIZE OF STANDARD DIES mm² CRIMP
PATTERNVOLUME
(cm.)WEIGHT(approx)
VXHCT-161 16 Ton 32 mm 50-400 mm 50,70,95,120,150,185,240,300,400 HEXAGONAL 77x24x13 11 kg.
VXHCT-162 16 Ton 24 mm 16-400 mm 16,25,35,50,70,95,120,150,185,240,300,400 HEXAGONAL 62x21x10 13.5 kg.
VXHCT-142 14 Ton 20 mm 16-300 mm 16,25,35,50,70,95,120,150,185,240,300 HEXAGONAL (¼)54x38x21 6.8 kg.
VXHCT-143 14 Ton 30 mm 16-300 mm 16,25,35,50,70,95,120,150,185,240,300 HEXAGONAL 77x24x13 11 kg.
VXHCT-121 12 Ton 18 mm 16-150 mm 16,25,35,50,70,95,120,150 RADIAN 55x25x14 6.2 kg.
VXHCT-122 12 Ton 20 mm 16-240 mm 16,25,35,50,70,95,120,150,185,240 HEXAGONAL (¼)54x38x21 6.2 kg.
VXHCT-123 12 Ton 32 mm 16-400 mm 16,25,35,50,70,95,120,150,185,240,300,400 HEXAGONAL 55x25x14 10.3 kg.
VXHCT-8 8 Ton 12 mm 6-70 mm 6,10,16,25,35,50,70 HEXAGONAL (1/5)40x36x17 2.8 kg.
TYPE MAX.PRESSURE
MAX.STROKE
CRIMP RANGE SIZE OF STANDARD DIES mm² CRIMP
PATTERNVOLUME
(cm.)WEIGHT(approx)
VXHCT-45 45 Ton 32 mm 240-1000 mm 400,500,630,800,1000 HEXAGONAL 17x17x37 24 kg.
VXHCT-25 25 Ton 22 mm 150-630 mm 240,300,400,500,630 HEXAGONAL 14x17x30 13.5 kg.
VXHCT-100 100 Ton 24 mm Sleeve pipe of Aluminium end of copper ø76mm / Steel sleeve pipe 36 mm HEXAGONAL 29x23x41 43.5 kg.
VXHCT-20 20 Ton 22 mm 16-500 mm 70,95,120,150,185,240,300,400,500 HEXAGONAL 13x15x27 8.5 kg.
TYPE MAX.PRESSURE
MAX.STROKE
CRIMP RANGE SIZE OF STANDARD DIES mm² CRIMP
PATTERNVOLUME
(cm.)WEIGHT(approx)
VXHCT-201RC 20 Ton 22 mm 16-400 mm 70,95,120,150,185,240,300,400 HEXAGONAL 56x22x16 18 kg.
VXHCT-141RC 14 Ton 30 mm 16-300 mm 16,25,35,50,70,95,120,150,185,240,300 HEXAGONAL 48x26x13 12 kg.
VXHPUMC- 12/22 RC
VXHBPT-200 M
VXHBPT-20200 VXHBPT-20200V
VXHPUMC- 8/22 RC
VXHCUTLS- 801
VXHCUTLS-802VXHCUTLS-12
VXHPUMC- 8/22
HYDRAULIC PUNCHING MACHINE
VXHBPT-120 M
HYDRAULIC BUSBAR PROCESSING TOOLS
TYPE OUTPUT BREADTHMAX. THICKNESS APERTURE
( in.)VOLUME
( cm.)WEIGHT(approx)IRON
SHEETCOPPER BUSBAR
VXHBPT-200M 200 mm 8 mm 12 mm Ø3/8”-Ø3/4” 85x65x125 195 kg.
VXHBPT-120M 15 Ton 120 mm 10 mm 65x55x100 140 kg.
STANDARD DIES (in/mm) Ø 3/8” (11.1), Ø ½” (14.3), Ø 5/8” (17.5), Ø 3/4” (20.6) x4 set
PUNCH DIES CUTTING DIES BENDING DIES
VXHBPT-120
HYDRAULIC BUSBAR PROCESSING TOOLS
HYDRAULIC BUSBAR PROCESSING TOOLS
VXHBPT-70
HYDRAULIC BUSBAR PROCESSING TOOLS
TYPE OUTPUT BREADTH MAXIMUM THICKNESS
VOLUME(cm.)
WEIGHT(approx.)
VXHBPT-20200 20 Ton 200 mm 12 mm 28x21x38 26.5 kg.
VXHBPT-35200 35 Ton 200 mm 10 mm 38x24x45 33.5 kg.
VXHBPT-20200V 20 Ton 200 mm 10 mm 38x24x45 29.5 kg.
VXHBPT-30100 30 Ton 100x100 mm 10 mm 33x25x42 34 kg.
VXHBPT-35200VXHBPT-30100
HYDRAULIC ROD CUTTERS
TYPE TONNAGE CUTTING RANGE
VOLUME(cm.)
WEIGHT(approx.)
VXHCUTLS-801 8 Ton 4-14 mm (1/5)47x40x15 4 kg.
VXHCUTLS-802 8 Ton 19-38 mm 77x24x13 8.5 kg.
VXHCUTLS-12 12 Ton 4-20 mm (1/4)54x38x21 5 kg.
TYPE MAX.PRESSURE
MAX.STROKE
MAX. THICKNESS PUNCH RANGE
PUNCH DIES( mm.)
VOLUME( cm.)
WEIGHT(approx)S S IRON
SHEETVXHPUMC-8/22 RC 8 Ton 22 mm 1.6 mm 3.2 mm 16-60 mm ø22,ø27,ø34,ø43,ø49,ø60 48x26x13 13 kg.
VXHPUMC-12/22 RC 12 Ton 22 mm 2 mm 4 mm 16-114 mm ø63,ø76,ø80,ø89,ø100,ø114 48x26x13 27 kg.
VXHPUMC-8/22 8 Ton 22 mm 1.6 mm 3.2 mm 16-60 mm ø22,ø27,ø34,ø43,ø49,ø60 50x32x15 9 kg.
TYPE OUTPUT BREADTH MAX. THICKNESS VOLUME( cm.)
WEIGHT(approx)
VXHBPT-120 15 Ton 120 mm 10 mm 63x27x28 60 kg.
STANDARD DIES (in/mm) Ø 3/8” (11.1), Ø ½” (14.3), Ø 5/8” (17.5), Ø 3/4” (20.6) x4 set
TYPE TONNAGE APERTURE( in.)
MAX. THICKNESS THROAT TH
VOLUME( cm.)
WEIGHT(approx)IRON
SHEETCOPPER BUSBAR
VXHBPT-70 35 Ton Ø3/8”-Ø3/4” 8 mm 12 mm 110 mm 33x20x39 37.5 kg.
STANDARD DIES (in/mm) Ø 3/8” (11.1), Ø ½” (14.3), Ø 5/8” (17.5), Ø 3/4” (20.6) x4 set
VXHWRC-802
VXHNS-5 RCVXHNS-20
VXPP-800(ONE-WAY)
VXPP-800(TWO-WAY)
VXHWCC-803 RC
VXHWCC-5 RC
HYDRAULIC WIRE & CABLE CUTTERS
VXHWRC-7
HYDRAULIC NUT SPLITTERS
VXHNS-14 RC
VXHNS-14
HYDRAULIC REMOTE CONTROL GEAR PULLERS
TYPE OUTPUT MAX. STROKE
MAX. SPREAD
VOLUME(cm.)
WEIGHT(approx.)
VXHGP-HP-5/50 5 Ton 50 mm 50-200 mm 73x18x18 15 kg.
VXHGP-HP-10/50 10 Ton 50 mm 50-250 mm 73x18x18 20 kg.
VXHGP-HP-20/60 20 Ton 60 mm 100-350 mm 73x21x18 27 kg.
VXHGP-HP-30/60 30 Ton 60 mm 150-400 mm 73x25x18 35 kg.
VXHGP-HP-50/60 50 Ton 60 mm 200-500 mm 73x25x18 55 kg.
VXHTRJ-8
HYDRAULIC POWER PACKS
TYPE WORKING PRESSURE
VOLUME(cm.)
WEIGHT(approx)
VXPP-800 (TWO-WAY) 800 Bar 36x28x50 30 kg.
VXPP-800 (ONE-WAY) 800 Bar 36x28x50 30 kg. Also Available: VXPP-1000, Working Pressure 1000 bar ( One-way / Two-way )
HYDRAULIC INTEGRAL PULLERS
TYPE OUTPUT MAX. STROKE
MAX. SPREAD
VOLUME(cm.)
WEIGHT(approx.)
VXHPL-5 5 Ton 50 mm 200 mm 73x18x18 7.5 kg.
VXHPL-10 10 Ton 50 mm 250 mm 73x18x18 11 kg.
VXHPL-20 20 Ton 60 mm 350 mm 73x21x18 19 kg.
VXHPL-30 30 Ton 60 mm 400 mm 73x25x18 25 kg.
VXHPL-50 50 Ton 60 mm 500 mm 73x25x18 45 kg.
HYDRAULIC TRACK JACK
TYPE TONNAGECUTTING RANGE VOLUME
( cm.)WEIGHT(approx)Telephone
CableLead Sheathed Cable (XLPE)
Under Ground Cable
VXHWCC-5RC 5 Ton 85 mm 85 mm 50 mm 47x23x10 7 kg.
VXHWCC-803RC 8 Ton 120 mm 120 mm 75 mm 60x27x10 13 kg.
VXHWCC-802 5 Ton 85 mm 85 mm 50 mm 69x23x10 8 kg.
VXHWCC-7 7 Ton 40 mm 40 mm 40 mm 61x12x9 6 kg.
TYPE TONNAGE CUTTING RANGE
VOLUME(cm.)
WEIGHT(approx.)
VXHNS-14 14 Ton M8-M24 mm 62x15x10 8 kg.
VXHNS-14 RC 14 Ton M8-M24 mm 22x9x9 2.5 kg.
VXHNS-20 20 Ton M22-M27 mm 70x15x12 8 kg.
VXHNS-5 RC 5 Ton M6-M12 mm 21x12x8 1.5 kg.
TYPE TONNAGE MAX. STROKE
VOLUME(cm.)
WEIGHT(approx)
VXHTRJ-8 8 Ton 90 mm 12x10x19 5 kg.
HYDRAULIC HAND PUMP - SINGLE PLUNGER
VXHP - 12
HYDRAULIC HAND PUMP - DOUBLE PLUNGER
TYPE WORKING PRESSURE
PLUNGER DIA
H.P. / L.P.
DISCHARGE / STROKEH.P. / L.P.
TANK CAPACITY
VXHP - 2 800 Bar Ø12.7 / Ø25.4 mm. 3.2 cc / 12.8 cc 3.5 / 7.5 / 11 ltr
VXHP - 2
NOTE :1.Plunger strokes are 25.4 mm unless otherwise / specified.2.Maximum operating effort is calculated at the end of 1000 mm long ever.
HYDRAULIC HOSE
HYHE - 1
HYDRAULIC HIGH PRESSURE THERMO PLASTIC HOSE FEMALE SWIVEL - END - M18 x 1.5 p.
SHUT- OFF / FLOW CONTROL VALVE
VXSOV - 700
QUICK COUPLER
VXQC - 700
PRESSURE GUAGE
TYPE DIAL / mm CAPACITY / kg/cm²
VXPG - 106 100 0 - 600
VXPG - 1000 100 0 - 1000
VXPG
TYPE WORKING PRESSURE
PLUNGER DIA H.P.
DISCHARGE / STROKEH.P. / L.P.
TANK CAPACITY
VXHP - 12 800 Bar Ø12.7 mm. 3.2 cc 3.5 ltr
TYPE LENGTH WORKING PRESSURE / DIA
HYHE - 1 1 mtr. 700 bar ( 10000 psi ) / Ø 1/4”
HYHE - 2 2 mtr. 700 bar ( 10000 psi ) / Ø 1/4”
HYHE - 3 3 mtr. 700 bar ( 10000 psi ) / Ø 1/4”
HYHE - 4 4 mtr. 700 bar ( 10000 psi ) / Ø 1/4”
HYHE - 5 5 mtr. 700 bar ( 10000 psi ) / Ø 1/4”
TYPE CAPACITY / kg/cm²
VXSOV - 700 700
TYPE CAPACITY / kg/cm² SIZE
VXQC - 700 700 ¼”, 3/8”, ½”, ¾”, 1”
VXQC - 1000 1000 ¼”, 3/8”, ½”, ¾”, 1”
CONTACT US
Registered Office:
# 157, Linghi Chetty Street, Chennai – 600001. India
Email : [email protected]
Mobile :+91 44 2533 0574, +91 98401 79451 / 98402 90789
Branch Office:
29,Panjaalpettu Village, Chennai-Banglore Highway (Near Cafe Coffe Day)Sriprembadur, Chennai – 602 105. India
Email :[email protected]
Mobile :+91 98401 79451
Website : http://madrastools.com/