valves_awwa valves.pdf
TRANSCRIPT
-
8/10/2019 Valves_AWWA Valves.pdf
1/28
RESILIENT SEATED GATE VALVES FORWATER & WASTEWATER INDUSTRY
1
RESILIENTSEATEDGATE VALVES& AWWA BUTTERFLYVALVES
For Water And Wastewater Industry
-
8/10/2019 Valves_AWWA Valves.pdf
2/28
RESILIENT SEATED GATE VALVES FOWATER & WASTEWATER INDUSTRY
2
-
8/10/2019 Valves_AWWA Valves.pdf
3/28
RESILIENT SEATED GATE VALVES FORWATER & WASTEWATER INDUSTRY
3
RESILIENT SEATED GATE VALVES
-
8/10/2019 Valves_AWWA Valves.pdf
4/28
RESILIENT SEATED GATE VALVES FOWATER & WASTEWATER INDUSTRY
4
Company Pro le
Vahn-Tech Interna t onal Inc. (An ISO 9001 Company) is a customer focused organiza t on based on Value-added and
Quality Service principles. Achieving long term partnership with our customers and being their supplier of choice
is our prime mission. We develop, manufacture and market VAHN-TECH (vt) branded Valves, Actuators, Automa t c
Control Valves and various ow control accessories. Vahn-Tech actuators are available in both quarter-turn and mul t
turn con gura t ons and are available in both pneuma t c and electrical opera t ng types. Our Product Range includes:
Gate Valves (Metal and Resilient seated) API and Non API applica t ons, including AWWA CS09 design gate valves
Bu er y Valves - Including AWWA C 504 type
Knife Gate Valves
Ball Valves
Globe Valves
Check Valves
Y-Strainers
Air Release Valves
Actuators
And a Variety of Control Valves e.g. Pressure reducing, Pressure sustaining, Slow check valve etc.
Our products conform to high quality standards and nd extensive uses in:
Oil and Gas
Water and Sewage
Chemicals
Paper and pulp
Irriga t on
Desalina t on and Power plants, and variety of other industrial uses
We can supply all types of valves with following material con gura t ons:
Duct le Iron, Cast Iron, Carbon Steel, Stainless Steel SS304, SS304L, SS316, SS316L, Duplex Stainless Steel, Super Duplex,
Alloy, Monel and Inconel with variety of sea t ng and stem con gura t ons.
We are a exible and agile corpora t on that is able to adapt to the varying customer requirements.
-
8/10/2019 Valves_AWWA Valves.pdf
5/28
RESILIENT SEATED GATE VALVES FORWATER & WASTEWATER INDUSTRY
5
Product Features:
NSF and WRAS approved Powder Coa t ngs and EPDM rubber are used to manufacture valves for use in
Potable Water (drinking water) service.
General design to:
AWWA C509, ASME B16.10 (ISO 5752-3 Series), AS 2638.2
DIN 3352, DIN 3202 F4 (ISO 5752 14 Series), DIN 3202 F5 (ISO 5752 15 Series)
BS5163 (ISO 5752 3 Series).
Low torque due to special wedge design.
Replaceable O-rings while in service.
Perfomance Test as per AWWA C509, AS 2638.2, EN 12266-1, DIN 3230, BS 5163.
Material of Construc t on:
Body, wedge and bonnet of Duc t le Iron (GGG 40 / GGG 50) or Cast Iron (GG 25).
Wedge fully encapsulated with EPDM or NBR by vulcanising process.
Stem: Bronze, Stainless Steel SS 410/420/431/316 as per customer request Forged & Machined
for superior strength and performance.
Stem Nut - Brass
Inside and Outside Fusion Bonded Epoxy Coa t ngs with a minimum thickness of 300 Microns
Field of Applica t on:
Mainly water and waste water industry, and similar applica t ons.
Max. Opera t ng Temperature: 70 Deg C
Design Speci ca t ons:
Pressure Ra t ngs
For AWWA C 509 Type : 125 LBS, 150 LBS & 250 LBS
For DIN & BS Standard Type : PN 10, PN 16 and PN 25
-
8/10/2019 Valves_AWWA Valves.pdf
6/28
RESILIENT SEATED GATE VALVES FOWATER & WASTEWATER INDUSTRY
6
-
8/10/2019 Valves_AWWA Valves.pdf
7/28
RESILIENT SEATED GATE VALVES FORWATER & WASTEWATER INDUSTRY
7
SURFACE PREPARATIONMetal burrs and sharp edges of cas t ngs are cleaned up using grinding machines. Oil/Grease etc is cleaned up usingspecial cleaning chemicals to ensure that the cas t ng is free of all impuri t es and ready to accept FBE coa t ng. These arethen sandblasted to create a rough texture on the surface of the cas t ng to help provide a strong mechanical bond withthe FBE coa t ng.
PRE-INSPECTION
Cast ngs are visually inspected to ensure cleanliness and roughness of the surfaces.
PRE-HEATINGCast ngs are then put inside an Oven to be heated to 280 Deg C.
APPLICATION OF POWDER COATINGUsing Electro-sta t c spray guns. the hot cas t ngs (min. Temperature 210 Deg C) are coated with Epoxy Powder Inside andoutside crea t ng an even lm of approx. 300 Microns all round, paying special a en t on to corners and sharp edges.
COOLINGAf er the cas t ngs are completely coated, these are then allowed to cool down resul t ng in forma t on of a solid layer ofEpoxy Film on the en t re valve body both inside and outside.
POST-INSPECTIONThe cured valve bodies are inspected to ensure pin-hole free coated surfaces using Pin-Hole Detec t on Tester.
STORAGEThe approved cas t ngs are then put in the semi- nished goods warehouse before assembly.
Step By Step Applica t on Procedure
Vahn-Tech uses only NSF and WRAS approved Epoxy Powder Coa t ngs FBE Coat ng to comply with requirements of use in contact with
Potable Water. For other non-cri t cal services, normal FBE coa t ngs are used.
Fusion Bonded Epoxy Coa t ng
-
8/10/2019 Valves_AWWA Valves.pdf
8/28
RESILIENT SEATED GATE VALVES FOWATER & WASTEWATER INDUSTRY
8
Handwheel:Valves supplied withhandwheel or bare sha f with square cap.
Stem Guard:Stem seal design provideseff ec t ve sealing againstingress of dirt and otherimpuri t es.
Wedge:Cast or Duc t le Iron, fullyencapsulated in vulcanizedEPDM / NBR rubber leaving noexposed metal surface. Central
guides help reduce frict
onbetween wedge and body duringopen/close opera t ons.
Waterway:Smooth waterway,wellrounded, provides superior ow characteris t cs and venturieff ect.
1
2
3
4
5
Extra Protec t on:SS Bolts used to secure bonnetto valve body are furtherprotected with Plas t c Seal /Wax to provide extra sealingand protec t on. Par t cularly wellsuited for buried service.
Ease of Maintenance:Top Two O-Rings arereplaceable with valvefully open and even underpressure.
Coa t ng:Fusion Bonded EpoxyCoa t ng to a min DFTof 300 micron providesan e ff ec t ve CorrosionProtec t on.
Stem:Stem made of Bronze, SS410/ 420 / 431 / 316, Forged andmachined to high strength andperformance.
8
6
7
-
8/10/2019 Valves_AWWA Valves.pdf
9/28
RESILIENT SEATED GATE VALVES FORWATER & WASTEWATER INDUSTRY
9
BS 5163 NRSSPECIFICATIONSSize DN 40-DN600Class PN 1O-PN 16-PN 25Design BS 5163Face to Face BS 5163 / IS0 5752-3 SeriesEnd Flange BS 4505 / BS EN 1092Test BS 5163
DlN 3352-F4 NRSSPECIFICATIONSSize DN 40-DN 600Class PN 10-PN 16-PN 25Design DIN 3352Face to Face DIN 3202-F4 ISO 5752-15 Series
End Flange DIN 2532-2533Test DIN 3230
SPECIAL APPLICATIONS
STEM WITH OPEN / CLOSE INDICATOR
Size DN 40-DN 600
Class PN 10-PN 25
AWWA C509 NRS MJ & FLANGED END TYPESPECIFICATIONSSize DN 80 - DN 600Class 125, 150, 250 lbsDesign C 509 / C 515Face to Face ISO 5257 3SeriesEnd Flange AWWA C 153 / A 21.53Test C 509 / C 515
DIN 3352-F5 NRSSPECIFICATIONSSize DN 40 - DN 600Class PN 10-PN 16-PN 25Design DIN 3352Face to Face DIN 3202-F5 ISO 5752-15 Series
End Flange DIN 2532-2533Test DIN 3230
AWWA C509 OS&YSPECIFICATIONSSize 1 1/ 2 - 12 (DN40-DN300)Class 125 Ibs-150-250 lbsDesign AWWA C 509Face to Face ASME A16.10 ISO 5752-3
SeriesEnd Flange ASME A16.10, ASME A16.42Test ANSI/AWWA C 509
BS 5163 NRSSPECIFICATIONSSize DN 300-DN 600Class PN 10-PN 16Design BS 5163Face to Face BS 5163, ISO 5752-3 SeriesEnd Flange BS 4504, EN 1092Test BS 5163
Socked End NRS (Push Fit Type)SPECIFICATIONSSize DN 50-DN 300Class PN 10-PN 16-PN 25Design DIN 3352Face to Face ISO 5752-5 Series
End Flange Suitable for PVC PipelinesTest DIN 3230
BS5150 0S & YSPECIFICATIONSSize DN 40 - DN 300Class PN 10- PN 25Design BS 5150Face to Face BS 5163, ISO 5752-3 SeriesEnd Flange BS 4504 / BS EN 1092Test BS 6755 Part 1
-
8/10/2019 Valves_AWWA Valves.pdf
10/28
RESILIENT SEATED GATE VALVES FOWATER & WASTEWATER INDUSTRY
10 BS 5163 NRS
-
8/10/2019 Valves_AWWA Valves.pdf
11/28
RESILIENT SEATED GATE VALVES FORWATER & WASTEWATER INDUSTRY
11BS 5150 OS&Y
-
8/10/2019 Valves_AWWA Valves.pdf
12/28
RESILIENT SEATED GATE VALVES FOWATER & WASTEWATER INDUSTRY
12 DIN3352-F4 NRS
-
8/10/2019 Valves_AWWA Valves.pdf
13/28
RESILIENT SEATED GATE VALVES FORWATER & WASTEWATER INDUSTRY
13DIN3352-F5 NRS
-
8/10/2019 Valves_AWWA Valves.pdf
14/28
RESILIENT SEATED GATE VALVES FOWATER & WASTEWATER INDUSTRY
14 SOCKET END NRS
-
8/10/2019 Valves_AWWA Valves.pdf
15/28
RESILIENT SEATED GATE VALVES FORWATER & WASTEWATER INDUSTRY
15AWWA C509 NRS
-
8/10/2019 Valves_AWWA Valves.pdf
16/28
RESILIENT SEATED GATE VALVES FOWATER & WASTEWATER INDUSTRY
16 AWWA C509 OS&Y
-
8/10/2019 Valves_AWWA Valves.pdf
17/28
RESILIENT SEATED GATE VALVES FORWATER & WASTEWATER INDUSTRY
17AWWA MJ END NRS
-
8/10/2019 Valves_AWWA Valves.pdf
18/28
AWWA C 504 Type - Bu er y Valves
18
-
8/10/2019 Valves_AWWA Valves.pdf
19/28
AWWA C 504 Type - Bu er y Valves
19
AWWA C 504 BUTTERFLY VALVES
-
8/10/2019 Valves_AWWA Valves.pdf
20/28
AWWA C 504 Type - Bu er y Valves
20
PRODUCT FEATURES:
NSF Cert ed Fusion Bonded Epoxy Coa t ng and EPDM rubber are used for valves to be used for in direct contact with
potable (drinking) water, while all other components in contact with water being of Stainless Steel.
Vahn-tech manufactures bu er y valves fully compliant to AWWA C504 standards. We produce this valves with following
end connec t ons to suit varying customer needs.
Wafer Type
Sizes: NPS3~NPS20 (DN80~DN500) Pressure Ra t ng: 150 psi / 25O psi
Flanged Ends Type
Size: NPS3~NPS72 (DN80~DN1800) Pressure Ra t ng: 150 psi / 250 psi
We also manufacture valves larger
than NPS72 on special requests.
Mechanical Joint End Type
Size: NPS3~NPS48 (DN80~DN1200) Pressure Ra t ng: 150 psi / 250 psi
* Our products are tested for Life Cycle tests as set down in AWWA C 504 standards. During these tests bi-direc t onal
sealing is tested under di ff erent pressure condi t ons.
* Our products are designed and tested to provide reliable performance during their en t re service life.
For Sizes DN 750 and above - The product design allows on-site maintenance and seat replacements op t on.
* NSF Cert ed Fusion Bonded Epoxy Coa t ng and EPDM rubber are used for areas of valves coming in direct contact with
potable (drinking) water , all other components being Stainless Steel
* The en t re manufacturing process strictly complies with AWWA C 504 standards requirements.
* Our products provide high performance, reliable service and long service life.
Speci ca t ons and Standards:
1. Connec t on Flanges: ASME B16.10 Class 125 / AWWA C 111 / A21.11
2. Top Flange: MSS-SP-101/ISO 5211
3. Face to face: AWWA C504
4. Test standard: AWWA C504
-
8/10/2019 Valves_AWWA Valves.pdf
21/28
AWWA C 504 Type - Bu er y Valves
21SPECIAL FEATURES
3 ~ 24 AWWA Bu er y Valve Design Speci ca t ons
Sha f SealSelf-sealing Y-type or V-type rings provide excellent sealing, low abrasionand long service life when uid pressure increases
Self-Lubrica t ng Bearing Stainless steel backed PTFE bearing is designed for superior lubrica t on withlow maintenance.
Corrosion Resistant Sha f Sha f s are ASTM A276 304 or 316 stainless steel. High strength stainless steelsha f is used for 250 psi pressure conforming to AWWA C504 standard.
Streamlined DiscDisc is available in either duc t le iron with stainless steel sealing edge or allstainless steel. The spherical design permit e ffi cient sealing.
BodyBody is available in cast iron or cast steel. Flange dimensions conform toASME B16.1 cIass 125 or class 250
Corrosion Resistant Sha fSha f is made of ASTM A 276 304 or High strength stainless steel. Upperand Lower pieces of sha f s fully comply with the design requirementsof AWWA C504 Class 150B.
Sha f SealingSelf-Sealing Y-type or V-type rings can provide excellent sealing, lowabrasion, long service life when uid pressure increases.
Sha f Connec t onDisc-sha f connec t on is achieved by use of stainless steel pins andself-locking nuts or pin free design, that transmits the required torqueand insures strong connec t on between disc and sha f performing inall condi t ons without loosening the disc-sha f connec t on.
DiscThe dome-shaped disc reduces the resistance to the uid and enhancesits strength to be more reliable in service.
SeatNSF approved EPDM Rubber is used for seat material for applica t ons
requiring contact with Potable (drinking) water. The seat is designedto allow eld removal/replacement.
BodyBody is made of ASTM A536 cast iron or cast steel ange dimensionsconform to ASME B16.1 Class I25 or Class 250.
-
8/10/2019 Valves_AWWA Valves.pdf
22/28
AWWA C 504 Type - Bu er y Valves
22 PRODUCT SPECIFICATIONS
-
8/10/2019 Valves_AWWA Valves.pdf
23/28
AWWA C 504 Type - Bu er y Valves
23PRODUCT SPECIFICATIONS - NPS 3 ~ NPS 24 (DN80 ~ DN600)
-
8/10/2019 Valves_AWWA Valves.pdf
24/28
AWWA C 504 Type - Bu er y Valves
24 FLANGE ENDS TYPE - DIMENSIONS - NPS 30 ~ NPS 72 (DN750 ~ 1800)
Model VT-BV5F (Flanged Ends Type) Model VT-BV5MJ (Mechanical Joint Type)
-
8/10/2019 Valves_AWWA Valves.pdf
25/28
AWWA C 504 Type - Bu er y Valves
25OPERATION MECHANISM
The Hand Lever is designed to be lightweight, compact and easy to operate to provide a long term reliable performance.Hand Lever is made of Epoxy Coated Duc t le Iron. The angle plate is made up of Chromium Plates Steel with 10 posi t onnotches.
AWWA C 504 design based travelling nut gear operator can be mounted on all valves sizes both for above and underground
service. For Gear Box to be used above ground, a hand wheel and visual posi t on indicator can be provided. Chainwheelwith 2 Square Nut is also available as an op t on. Standard gear box for underground use is lled with 90% grease in thehousing chamber & is also equipped with 2 Square Nut.
Traveling Nut Operator
-
8/10/2019 Valves_AWWA Valves.pdf
26/28
AWWA C 504 Type - Bu er y Valves
26 OPERATION MECHANISM
-
8/10/2019 Valves_AWWA Valves.pdf
27/28
AWWA C 504 Type - Bu er y Valves
27
-
8/10/2019 Valves_AWWA Valves.pdf
28/28
AWWA C 504 Type - Bu er y Valves
VAHN-TECH INTERNATIONAL INC.2906-15 Fort York Blvd; Toronto, ON M5V 3Y4CanadaTel/Fax: +1 416 342 0001Email: [email protected]
V.T. INTERNATIONAL (FZE)P.O. Box 121985 Saif Zone Sharjah,United Arab EmiratesTel: +971 6 557 9336 Fax: +971 6 557 9337Email: [email protected]
VAHN-TECH INTERNATIONAL GmbDorfstrasse 8,3415 Hasle bei Burgdorf,
SwitzerlandTel: +41 34 460 26 26 Fax: +41 34 460 26 27
Email: [email protected]
VAHN-TECH INTERNATIONAL INC. LIMIT68 Netley Road, Barking Side,
ILFORD, ESSEX IG 2 7 NP, LodoUnited Kingdom
Tel: +44 208 554 1163 / +44 (795) 649 3190Email: [email protected]