valves - conex bänninger€¦ · valves 1451 - 1/2" - 2" no component material...

Valves

Valves Range 1340 Double Check Valves PN16

Material Specification

1340 - 1/2" - 2"

No Component Material Specification 1 Body DZR Brass BS EN 12164 CW602N 2 Check Spool Acetal Acetal 3 Retaining Ring Nylon Nylon 66 4 Clip Stainless steel BS.ISO.15510 5 O Ring EPDM EN 2430:1995 6 Drain Screw DZR Brass BS EN 1982 CC491K

Valves Valves Range: 1340 Double Check Valves PN16

Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)

1340 x 3 3 x x x x x x

Valve Suitability

1340 Temp (°C) Bar psi

Water -10 to 85°C PN16

Max. working parameters

This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.

Features and Benefits:• Designed in accordance with WRAS requirement

and BS 6282-1 Standards.

• ISO 228 parallel female ends.

• PN 16 from -10° to 85°C.

• Specifically designed to be used with water.

• Prevents back siphonage.

• Manufactured in accordance with BS EN 13959.

Double Check Valve - 1340

Order Code

ISO 288 threadSize DN A B

Weight (kg)

134050FF0160404 1/2" 15 70 17.3 0.10134050FF0160606 3/4" 20 85 19.8 0.17134050FF0160808 1" 25 100 22.8 0.27134050FF0161010 1 1/4" 32 120 26.1 0.40134050FF0161212 1 1/2" 40 138.5 30.3 0.58134050FF0161616 2" 50 183.2 35.8 1.30

Valves

Valves Range 1360 Horizontal Lift Check Valves PN32


1360 - 1/2" - 2"

No Component Material Specification 1 Body Bronze BS EN 1982 CC491K 2 Cap Bronze BS EN 1982 CC491K 3 Disc Bronze BS EN 1982 CC491K 4 Gasket Seal PTFE PTFE 5 ID Disc Aluminium EN 1706 LM6

Valves Valves Range: 1360 Horizontal Lift Check Valves PN32


1360 3 3 3 3 3 x x x x

Valve Suitability


Water -10°C to + 100°C PN 32

Water at 200°C PN16


Specification:Valves are manufactured in accordance with BS 5154.

Disc is spherical shaped guided in the cap. Body seat is integral.

Connecting threads are in accordance with BS EN 10266 (ISO7) or ISO228.

This valve is not suitable for use on Group 1 gases or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC.

36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar

Temperature oC

0 40 80 120 160 200 240


Features and Benefits:• Suitable for water and steam service.

• Metal to metal seat.

• Designed in accordance with BS 5154 and WRAS requirements.

• Threads to BS EN 10226 (ISO7).

• Suitable for LTHW and chilled systems.

Horizontal Lift Check Valve - 1360

Order Code

BS EN 10226 (ISO 7) threadSize DN A B

Weight (kg)

136020RR0320404 1/2" 15 60 34 0.28136020RR0320606 3/4" 20 75 42 0.44136020RR0320808 1" 25 85 46 0.60136020RR0321010 1 1/4" 32 100 51 1.14136020RR0321212 1 1/2" 40 110 54 1.46136020RR0321616 2" 50 120 72 2.57

Valves

1451 - 1/2" - 2"

No Component Material Specification 1 Seat EPDM EN 2430:1995 2 Spring Stainless Steel BS.ISO.15510 3 Spindle (Up) Brass BS EN 12165 CW617N-DW 4 Spindle (Down) Brass BS EN 12165 CW617N-DW 5 Bonnet Brass BS EN 12165 CW617N-DW 6 Body Brass BS EN 12165 CW617N-DW

Valves Range 1451 Spring Check Non Return Valve


Valves Valves Range: 1451 Spring Check Non Return Valve


1451 x 3 3 x 3* x x x x

Valve Suitability


Water -10°C to + 100°C PN 12/10 Min Operating Pressure

1/2" - 1" 12 bar @ 90°C -0.002 bar to + 0.04 bar

1/4" - 2" 10 bar @ 90°C Not suitable for hot working


* Limited to 5 bar max


Features and Benefits:• Designed in accordance with WRAS requirement.

• Brass core for improved strength and performance .

• PN12 up to 1", PN10 above 1".

• Threads to ISO228.

Non-Return Valve - 1451

Order Code

ISO228 ThreadSize DN A B

Weight (kg)

145110FF0120404 1/2" 15 12 47.5 33145110FF0120606 3/4" 20 12 51 42145110FF0120808 1" 25 12 58 47145110FF0101010 1 1/4" 32 10 72 59145110FF0101212 1 1/2" 40 10 83 67145110FF0101616 2" 50 10 91 83

Valves

Valves Range 1461 Foot Valve


1461 - 1/2" - 2"

No Component Material Specification 1 Seat EPDM EN 2430:1995 2 Spring Stainless Steel BS.ISO.15510 3 Spindle (Up) Brass BS EN 12165 CW617N-DW 4 Spindle (Down) Brass BS EN 12165 CW617N-DW 5 Bonnet Brass BS EN 12165 CW617N-DW 6 Body Brass BS EN 12165 CW617N-DW 7 Strainer Stainless Steel BS.ISO.15510 8 Strainer Adaptor Acetal Acetal

Valves Valves Range: 1461 Foot Valve


1461 x 3 x 3 3* x x x x

Valve Suitability


Water -10°C to + 100°C PN 12/10 Min Operating Pressure

1/2" - 1" 12 bar @ 90°C Not Suitable for Hot working Pressure

1/4" - 2" 10 bar @ 90°C


* Limited to 5 bar max



• Stainless steel mesh strainer.

• Brass core for improved strength and performance.

• PN12 up to 1", PN10 above 1".

• Threads to ISO228.

Non-Return Valve - 1461

Order Code


Weight (kg)

146110FF0120404 1/2" 15 12 65 33146110FF0120606 3/4" 20 12 86 42146110FF0120808 1" 25 12 103.5 47146110FF0101010 1 1/4" 32 10 119 59146110FF0101212 1 1/2" 40 10 141.5 67146110FF0101616 2" 50 10 159 83

Valves

Valves Range 1470 Swing Check Valve PN25 (Brass)


1470 - 1/2" - 2"

No Component Material Specification 1 Body Brass BS EN 112165 CW617N 2 Cap Brass BS EN 112165 CW617N 3 Identity Disc Aluminium EN 1706 LM6 4 Swing Pin Stainless steel BS.ISO.15510 5 Swing Arm Brass BS EN 112165 CW617N 6 Seat Brass BS EN 112165 CW617N 7 Retaining Nut Brass BS EN 112165 CW617N

Valves Valves Range: 1470 Swing Check Valve PN25 (Brass)

Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1470 3 3 3 3 x x x x x

Valve Suitability


Water -10°C to + 100°C PN25

at 186°C PN10.5


Specification:Brass Body.

Metal Disc, Screwed in Cap.

Operation is automatic using a swing type check.

Valves are manufactured in accordance with BS5154:1991 PN25 for Series B ratings.

Connecting threads are to BS EN 10226.

This valve is not suitable for use on Group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC.

36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar

Temperature oC

0 30 60 90 120 150 180 210

186100

10.5

25



• Suitable for water and other liquids.


• Horizontal swing check design.

• Choice of alternative disc material.

• Threads to BS EN 10226 (ISO 7).

• Threads to ISO228 available to order.

Swing Check Valve - 1470

Order Code


Weight (kg)

147010RR0250404 1/2" 15 60 42 0.26147010RR0250606 3/4" 20 70 48 0.37147010RR0250808 1" 25 80 54 0.64147010RR0251010 1 1/4" 32 90 60 0.92147010RR0251212 1 1/2" 40 100 70 1.26147010RR0251616 2" 50 110 80 1.95

Valves

Valves Range 1470 Swing Check Valve PN25 (Bronze)


1470 - 1/2" - 2"

No Component Material Specification 1 Body Bronze BS EN 1982 CC491K 2 Cap Bronze BS EN 1982 CC491K 3 Identity Disc Aluminium EN 1706 LM6 4 Swing Pin Stainless steel BS.ISO.15510 5 Swing Arm Bronze BS EN 1982 CC491K 6 Seat Bronze BS EN 1982 CC491K 7 Retaining Nut Bronze BS EN 1982 CC491K

Valves Valves Range: 1470 Swing Check Valve PN25 (Bronze)


1470 3 3 3 3 3 x x x x

Valve Suitability


Water -10°C to + 100°C PN25

at 186°C PN10.5


Specification:Bronze Body

Metal Disc, Screwed in Cap.

Operation is automatic using a swing type check.

Valves are manufactured in accordance with BS5154:1991 PN25 for Series B ratings.

This valve is not suitable for use on Group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC.



• Suitable for water and other liquids.


• Horizontal swing check design.

• Choice of alternative disc material.

• Threads to BS EN 10226 ( ISO7).

• Suitable for LTHW and chilled systems.

36

32

28

24

20

16

12

8

4

0

Pre

ssur

e B

ar

Temperature oC

0 30 60 90 120 150 180 210

186100

10.5

25

Swing Check Valve - 1470

Order Code


Weight (kg)

147020RR0250404 1/2" 15 60 42 0.36147020RR0250606 3/4" 20 70 48 0.44147020RR0250808 1" 25 80 54 0.69147020RR0251010 1 1/4" 32 90 60 0.97147020RR0251212 1 1/2" 40 100 70 1.38147020RR0251616 2" 50 110 80 2.01

valves - conex bänninger€¦ · valves 1451 - 1/2" - 2" no component material...

Documents