valve fittings wellhead components - inox mecc · • functional inspection using hydraulic and...
TRANSCRIPT
VALVE COMPONENTS& PETROCHEMICAL SOLUTIONS
valve fittings & wellhead components
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050CividatealPiano BergamoITALYtel.+39036397003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
release11-2016
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
Check Fittings
productions:• With or without o-ring• Metal or soft seat• Available with hex socket• According to costumer drawing• With or without TCC • Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Single Check Valve
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A D Hex
CH018S 1/8" NPT 16 9,5 8,3 7
CH014S 1/4" NPT 16 11 11 8
CH038S 3/8" NPT 17 12 14 11
CH012S 1/2" NPT 20 15 16 13
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Check Fittings a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Double Check Valve
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A D Hex
CH018DB 1/8" NPT 16 9,5 8,3 7
CH014DB 1/4" NPT 16 11 11 8
CH038DB 3/8" NPT 17 12 14 11
CH012DB 1/2" NPT 20 15 16 13
productions:• With or without o-ring• Metal or soft seat• Available with hex socket• According to costumer drawing• With or without TCC • Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Check Fittings a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
SingleCheck Valve with O-Ring
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A D Hex
CH014SOR 1/4" NPT 22,5 12 11 8
CH038SOR 3/8" NPT 22,5 12 14 11
productions:• With or without o-ring• Metal or soft seat• Available with hex socket• According to costumer drawing• With or without TCC • Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Check Fittings a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Check ValveSoft Seatwith O-Ring
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A Hex
CH038SS 3/8” NPT 26 12,5 11
productions:• With or without o-ring• Metal or soft seat• Available with hex socket• According to costumer drawing• With or without TCC • Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Check Fittings a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Check Valve Soft Seat
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A Hex
CH014CI-TM 1/4"NPT 17 12 6
CH038CI-TM 3/8" NPT 22,5 13,8 8
productions:• With or without o-ring• Metal or soft seat• Available with hex socket• According to costumer drawing• With or without TCC • Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Check Fittings a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
HighPressure Check Valve
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L Hex
S10CF014014 1/4" NPT 64 22
S10CF038038 3/8" NPT 64 22
S10CF012012 1/2" NPT 76 30
S10CF034034 3/4" NPT 85 36
S10CF100100 1" NPT 95 46
productions:• With or without o-ring• Metal or soft seat• Available with hex socket• According to costumer drawing• With or without TCC • Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050CividatealPiano BergamoITALYtel.+39036397003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
release11-2016
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
Bleeder Bonnets
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Antitamper Needle Bonnet
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L
K064BT075F 3/4” 16 UNF 88
productions:• Packing with PTFE or Graphoil• Available with or without
locking device
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Bleeder Bonnets a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Bleeder Needle Bonnet
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L Hex1 Hex2
K064BB075F 3/4” 16 UNF 79 22 17
productions:• Packing with PTFE or Graphoil• Available with or without
locking device
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Bleeder Bonnets a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Bleeder Needle Flanged
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A
BB10.B8.FL 3/4” UNF 60 52
productions:• Packing with PTFE or Graphoil• Available with or without
locking device
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Bleeder Bonnets a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
O. S. & YBonnet
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A
OSYB D.24 133 100
productions:• Packing with PTFE or Graphoil• Available with or without
locking device
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Bleeder Bonnets a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
O. S. & Y Type Globe Valve
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A
OSYB-D.30.0M.4.GLOBE D30 115 100
productions:• Packing with PTFE or Graphoil• Available with or without
locking device
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Bleeder Bonnets a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Bleeder Bonnet
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A Hex1 Hex2
BB-M22 M22 109 80/100 27 27
BB-M28 M28 109 80/100 32 32
BB-M30 M30 113 80/100 32 32
BB-M32 M32 115 80/100 36 32
productions:• Packing with PTFE or Graphoil• Available with or without
locking device
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Bleeder Bonnets a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Bleeder Bonnet with Graphoil Seat
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size LT V Hex1 Hex2
IM BBM22GPH M22 109 100 36 27
productions:• Packing with PTFE or Graphoil• Available with or without
locking device
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050CividatealPiano BergamoITALYtel.+39036397003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
release11-2016
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
Cavity Plugs
productions:• NPT thread• GAS thread• NPT with o-ring• According to costumer drawing
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Cavity Plug NPT
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A D Hex
P018 1/8" NPT 16 10 12.7 11
P014 1/4" NPT 17 11 18.5 16
P038 3/8" NPT 21 13 20.8 18
P012 1/2" NPT 22 14 25.3 22
P034 3/4" NPT 26 16 31 27
P100 1" NPT 29 19 41.5 36
P114 1 1/4" NPT 35 21 53 46
P112 1 1/2" NPT 37 21 57.6 50
P200 2" NPT 40 22 75 65
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Cavity Plugs a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Cavity Plug Gas
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A D Hex
PG018 1/8" GAS 16 10 12.7 11
PG014 1/4" GAS 17 11 18.5 16
PG038 3/8" GAS 21 13 20.8 18
PG012 1/2" GAS 22 14 25.3 22
PG034 3/4" GAS 26 16 31 27
PG100 1" GAS 29 19 41.5 36
PG114 1 1/4" GAS 35 21 53 46
PG112 1 1/2" GAS 37 21 57.6 50
PG200 2" GAS 40 22 75 65
productions:• NPT thread• GAS thread• NPT with o-ring• According to costumer drawing
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Cavity Plugs a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Cavity Plug NPTwith O-Ring
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A B E G Hex
P014OR 1/4" NPT 51 11.5 15.5 10 22 24
P038OR 3/8" NPT 52 11.5 16.5 13 22 24
P012OR 1/2" NPT 53 13 14 17 22 24
P034OR 3/4" NPT 58 15 16 21 27 30
P100OR 1" NPT 65 18 19 27 34 36
productions:• NPT thread• GAS thread• NPT with o-ring• According to costumer drawing
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Cavity Plugs a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Cavity Plug Gas with O-Ring and Graphoil
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A E F N Hex
PG012OR 1/2" GAS 50 16 16.8 13 32 27
PG034OR 3/4" GAS 52 20 21 17 40 32
PG100OR 1" GAS 55 21 29 25.3 45 36
productions:• NPT thread• GAS thread• NPT with o-ring• According to costumer drawing
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050CividatealPiano BergamoITALYtel.+39036397003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
release11-2016
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
Relief Valves
productions:• With soft or metal seat• NPT thread• According to costumer drawing• Setting pressure
according to customer request • Max allowable setting pressure
645 barg (Class 2500)
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Relief Valve
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L Hex
RL014 1/4" NPT 85 24
RL038 3/8" NPT 85 24
RL012 1/2" NPT 85 24
RL034 3/4" NPT 90 30
RL100 1" NPT 90 36
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Relief Valves a wide range of valve fittings & weel head components
productions:• With soft or metal seat• NPT thread• According to costumer drawing• Setting pressure
according to customer request • Max allowable setting pressure
645 barg (Class 2500)
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Relief Valve -High Pressure
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L
RL014HP 1/4" NPT 100
RL038HP 3/8" NPT 100
RL012HP 1/2" NPT 104
RL034HP 3/4" NPT 108
RL100HP 1" NPT 113
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Relief Valves a wide range of valve fittings & weel head components
productions:• With soft or metal seat• NPT thread• According to costumer drawing• Setting pressure
according to customer request • Max allowable setting pressure
645 barg (Class 2500)
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Safety Relief Valve High Pressure · Metal Seat
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A C
00-10-001-00-C1-50-014 1/4" NPT 113 20 32
00-10-001-00-C1-50-038 3/8" NPT 113 23 32
00-10-001-00-C1-50-012 1/2" NPT 113 29 32
00-10-001-00-C1-50-034 3/4" NPT 113 29 35
00-10-001-00-C1-50-100 1" NPT 113 32 40
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Relief Valves a wide range of valve fittings & weel head components
productions:• With soft or metal seat• NPT thread• According to costumer drawing• Setting pressure
according to customer request • Max allowable setting pressure
645 barg (Class 2500)
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Safety Relief Valve High Pressure · Soft Seat
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A C
00-10-002-01-C2-50-014 1/4" NPT 113 20 32
00-10-002-01-C2-50-038 3/8" NPT 113 23 32
00-10-002-01-C2-50-012 1/2" NPT 113 29 32
00-10-002-01-C2-50-034 3/4" NPT 113 29 35
00-10-002-01-C2-50-100 1" NPT 113 32 40
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Injection Fittings a wide range of valve fittings & weel head components
productions:• With or without vent cup• With or without o-ring• Short or long pattern• According to costumer drawing• With or without TCC• Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Grease Injector
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A Hex
IN014S 1/4" NPT 25 12 14
IN038S 3/8" NPT 27 14 14
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Injection Fittings a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Grease Fitting
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size type L A Hex
GF014S 1/4" NPT A 38 18 22
GF038S 3/8" NPT B 37,5 18 22
GF012S 1/2" NPT B 39,5 20 22
GF034S 3/4" NPT B 41,5 22 30
GF100S 1" NPT B 46,5 27 36
A
B
productions:• With or without vent cup• With or without o-ring• Short or long pattern• According to costumer drawing• With or without TCC• Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Injection Fittings a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Grease Fitting Vent Cup
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size type L A Hex1 Hex2
GF014SVC 1/4" NPT A 49 18 27 30
GF038SVC 3/8" NPT B 49 18 27 30
GF012SVC 1/2" NPT B 52 21 27 30
GF034SVC 3/4" NPT B 53 22 30 30
GF100SVC 1" NPT B 58 27 36 30
A
B
productions:• With or without vent cup• With or without o-ring• Short or long pattern• According to costumer drawing• With or without TCC• Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Injection Fittings a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Grease Fitting SR
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A Hex
GF014SSR 1/4" NPT 37,5 18 22
GF038SSR 3/8" NPT 35 18 22
GF012SSR 1/2" NPT 38 21 22
GF034SSR 3/4" NPT 38,5 22 30
GF100SSR 1" NPT 43,5 27 36
productions:• With or without vent cup• With or without o-ring• Short or long pattern• According to costumer drawing• With or without TCC• Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Injection Fittings a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Grease Fitting Vent Cup SR
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A Hex1 Hex2
GF014SVCSR 1/4" NPT 46 15 27 30
GF038SVCSR 3/8" NPT 49 18 27 30
GF012SVCSR 1/2" NPT 53 21 27 30
GF034SVCSR 3/4" NPT 53 22 30 30
GF100SVCSR 1" NPT 58 27 36 30
productions:• With or without vent cup• With or without o-ring• Short or long pattern• According to costumer drawing• With or without TCC• Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Injection Fittings a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Grease FittingVent Cup with O-Ring
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size type L A Hex1 Hex2
GF014SVCOR 1/4" NPT A 63 58 27 30
GF038SVCOR 3/8" NPT B 64 59 27 30
GF012SVCOR 1/2" NPT B 68 63 27 30
GF034SVCOR 3/4" NPT B 72 67 30 30
GF100SVCOR 1" NPT B 80 75 36 30
A
B
productions:• With or without vent cup• With or without o-ring• Short or long pattern• According to costumer drawing• With or without TCC• Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Injection Fittings a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Grease Fitting Vent Cup with O-Ringand Graphoil
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size type L A Hex1 Hex2
GF014SSHOR 1/4" GAS A 56 51 22 30
GF038SSHOR 3/8" GAS B 67 60 27 30
GF012SSHOR 1/2" GAS B 67 58 27 30
A
B
productions:• With or without vent cup• With or without o-ring• Short or long pattern• According to costumer drawing• With or without TCC• Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Injection Fittings a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Grease Fitting Vent Cup Long Pattern
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size type L A Hex1 Hex2
GF018SLPVC 1/8" NPT A 89 11 24 24
GF014SLPVC 1/4" NPT A 91 18 27 30
GF038SLPVC 3/8" NPT B 91 18 27 30
GF012SLPVC 1/2" NPT B 91 21 27 30
GF034SLPVC 3/4" NPT B 91 22 30 30
GF100SLPVC 1" NPT B 91 27 36 30
A
B
productions:• With or without vent cup• With or without o-ring• Short or long pattern• According to costumer drawing• With or without TCC• Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Injection Fittings a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Lock Seal Fitting
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size type L A Hex1 Hex2
GF014DBLS 1/4" NPT A 61 17 19 19
GF038DBLS 3/8" NPT B 67 18.5 22 22
GF012DBLS 1/2" NPT B 67 18.5 22 22
A
B
productions:• With or without vent cup• With or without o-ring• Short or long pattern• According to costumer drawing• With or without TCC• Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Injection Fittings a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Packing Injection Fitting 9/16” Autoclave
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: This particular is available only if requested.
productions:• With or without vent cup• With or without o-ring• Short or long pattern• According to costumer drawing• With or without TCC• Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Injection Accessories a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
PressureRelief Tool
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size type L A Hex
GF114RT 1”-14 UNF A 64 15 32
available materials: • Carbon steel or stainless steel
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Injection Fittings a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Flow Wolf Leak-LockMetal Seat
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: This particular is available only if requested.
productions:• With or without vent cup• With or without o-ring• Short or long pattern• According to costumer drawing• With or without TCC• Ball STD in stainless steel 316 or on request in monel, inconel 625• Spring STD in stainless steel 316 or on request in inconel 718, 625 and 750
available materials: • Carbon Steel A105 or LF2 • Stainless Steel grade 316(L), 304(L) • Duplex F51 and superduplex F53, F55 • Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050CividatealPiano BergamoITALYtel.+39036397003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
release11-2016
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
Bleeders
productions:• With or without o-ring• With or without hex socket• According to costumer drawing
available materials: • Carbon Steel A105 or LF2• Stainless Steel grade 316(L), 304(L)• Duplex F51 and superduplex F53, F55• Other special alloys
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Bleeder Hex Socket
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A Hex
BL014HS 1/4" NPT 48 18 24
BL038HS 3/8" NPT 48 18 24
BL012HS 1/2" NPT 50 20 24
BL034HS 3/4" NPT 50 20 30
BL100HS 1" NPT 52 22 36
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Bleeders a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Bleeder
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A Hex1 Hex2
BL014 1/4" NPT 63 18 24 24
BL038 3/8" NPT 63 18 24 24
BL012 1/2" NPT 65 20 24 24
BL034 3/4" NPT 56 20 30 24
BL100 1" NPT 67 22 36 24
productions:• With or without o-ring• With or without hex socket• According to costumer drawing
available materials: • Carbon Steel A105 or LF2• Stainless Steel grade 316(L), 304(L)• Duplex F51 and superduplex F53, F55• Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050CividatealPiano BergamoITALYtel.+39036397003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
release11-2016
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
Bleeders
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A Hex
BL014HSOR 1/4" NPT 66 36 24
BL038HSOR 3/8" NPT 66 36 24
BL012HSOR 1/2" NPT 67 37 24
BL034HSOR 3/4" NPT 71 41 30
BL100HSOR 1" NPT 77 47 36
Bleeder with Hex Socket and O-Ring
productions:• With or without o-ring• With or without hex socket• According to costumer drawing
available materials: • Carbon Steel A105 or LF2• Stainless Steel grade 316(L), 304(L)• Duplex F51 and superduplex F53, F55• Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
Bleeders a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050 Cividate al Piano Bergamo ITALYtel. +39 0363 97003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Bleeder with O-Ring
rele
ase
11-20
16
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
PART NUMBER Size L A Hex1 Hex2
BL014OR 1/4" NPT 81 66 24 24
BL038OR 3/8" NPT 81 66 24 24
BL012OR 1/2" NPT 82 67 24 24
BL034OR 3/4" NPT 86 71 30 24
BL100OR 1" NPT 92 77 36 24
productions:• With or without o-ring• With or without hex socket• According to costumer drawing
available materials: • Carbon Steel A105 or LF2• Stainless Steel grade 316(L), 304(L)• Duplex F51 and superduplex F53, F55• Other special alloys
INOX MECC, leader in the manufacturing of stems and valve components also o�ers its customers a wide range of Valve Fittings & Weel Head Components built according to the company or customer specifications.
Thanks to our Technical Department we are able to adapt our products to the customers’ needs.
INOX MECC can manufacture the entire range of products here listed from any raw material requested by the customer, o�ering the following services:
• Traceabilityofthematerialbylotidentification(heatcode/barcode), rating pressure markings and any other markings required by the customer.
• Supplyofrawmaterialcertificatesoforiginandadditionaltests(PT,UT,MT),3.2,etc and for our customers online access to download certificates, additional testings andgeneraldocuments(invoices,deliverynotes,etc..)
• Protectivesurfacetreatmentssuchasgalvanization,phosphatization, ENPandothersuponcustomerrequest.
• Functionalinspectionusinghydraulicandpneumatictestbenches inaccordancewithAPIspecificationsorotherinternational/customerstandards.
• Certificateofhydraulic/pneumaticinspection
Our products range:
CHECK FITTINGS BLEEDER BONNET CAVITY PLUGS RELIEF VALVES INJECTION FITTINGS BLEEDERS
a wide range of valve fittings & weel head components
INOX MECC s.r.l.Via Cortenuova s.n.c. 24050CividatealPiano BergamoITALYtel.+39036397003 www.inoxmecc.com
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
release11-2016
Our products variations:
Hydro or gas servicesMetal-to-metal or soft sealWith or without external O-RingWith or without vent cupInternal or external hex boltsSpherical, disc or conical wedgeStandard or long pattern (extended body)
Company with quality environmentand safety system-certification
N. IT262042 - N.IT268343 - N. IT270304/UK
6A - 1186Licensed for
Ring Joint Gaskets
REG. NO.Q1-0995
mm 12,6
testi descrittivi delle licenze - Myriad Pro Semibold Condensed - corpo e interlinea: 5,5 pt
dimensioni minime riproducibili per i documenti e le comunicazioni correnti,sono possibili applicazioni in riduzione ma solo per prodotti di piccole dimensionicome biglietti da visita, tessere, ecc...
mm 76
Bleeders
C 0%M 0 %Y 0 %K 100 % o colore utilizzato
INOXMECC10-2014
scheda logo
logotipo · Pantone
applicazioni
applicazioni in negativoapplicazioni in b/n o monocolore
payo�
font: Gotham - Book
Pant.2955 C
C 100 %M 48 %Y 0 %K 52 %
coloriistituzionali
quadricromia(fogra 39)
applicazioni in b/no monocromatiche
ImaginaVia Mattei, 1831059 Zero Branco - Treviso, Italiatel. +39.0422.485421fax +39.0422.485637
www.studioimagina.comwww.studioimagina.net
VALVE COMPONENTS & PETROCHEMICAL SOLUTIONS
claim
font: Gotham - Book
your needs our passion
logotipo · CMYK
Anti-Blowout Plug
NOTES: other products or di erent fittings design are available on request, all measures are in millimeters.
CODE Size L A Hex1 Hex2
ABWP014 1/4" NPT 50 21 22 17
ABWP038 3/8" NPT 54 21 22 17
ABWP012 1/2" NPT 58 24 24 17
ABWP034 3/4" NPT 63 27 27 19
ABWP100 1" NPT 67 29 36 24
productions:• With or without o-ring• With or without hex socket• According to costumer drawing
available materials: • Carbon Steel A105 or LF2• Stainless Steel grade 316(L), 304(L)• Duplex F51 and superduplex F53, F55• Other special alloys