vacuum blender...ningbo greenis home appliances co., ltd. vacuum blender f-9200 01 greenis vacuum...

Ningbo Greenis Home Appliances Co., Ltd.www.greenis.com

VACUUM BLENDERF-9200

01 GREENIS VACUUM BLENDER GREENIS VACUUM BLENDER 02

IMPORTANT SAFEGUARDS

Read all instructions before using.

Please ensure the current, voltage and frequency are in accordance with the standard in your country.

To avoid danger of electric shock, do not put main body (motor) in water (or any other liquid) or pour water onto the machine.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Close supervision is necessary when any appliance is used by or near children. Children shall not play with the appliance.

Please unplug the machine if it is to be in long-time disuse. Unplug from outlet when not in use, before putting on or taking o� parts and before cleaning.

Do not operate any appliance with damaged cord or plug or after the appli-ance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment.

It may cause fire, electric shock or human injury if using unauthorized parts & accessories or refitting machine without authorization.

To ensure safety please read through the manual before using and keep the manual where it is easily accessible. This product is intended for household use only and please follow instructions of use and assembly in the manual.

TABLE OF CONTENTS

15

01

02-04

05-08

09-13

13-14

Welcome

Important Safeguards

Product Components

How to Use It

Cleaning & Maintenance

Troubleshooting

What’s in the Box/Product Specifications16

DO NOT leave the machine unattended when it is in use.

When using the machine please ensure water or any other liquid in the jar does not exceed maximum scale marked on the jar surface.

DO NOT operate the machine with no ingredient or water inside the jar.

Please keep the machine away from intense heat. DO NOT place it on a cloth in case of damage to parts.

This product is intended for indoor use only. Do not use outdoors.

To reduce the risk of injury, never place cutter-assembly blades on base with-out jar properly attached.

Blades must be assembled, disassembled and changed by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

The use of attachments, including canning jars, not recommended by the man-ufacturer may cause a risk of injury to persons.

Do not let cord hang over edge of table or counter.

Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.

Be careful when handing the sharp cutting blades, emptying the jar and during cleaning.

Switch o� the appliance and disconnect from supply before disassembling, changing accessories, approaching parts that move in use and before cleaning.

Do avoid contact of moving parts.

DO NOT place any other implement like spoons, forks and knives into the jar as they may cause damage to blades and other parts.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as timer, or connected to a circuit that is regularly switched on and o� by the utility.


WELCOMETo familiarize yourself with your new Greenis blender, please take the time to read through this user manual. All content in this manual is for reference purposes only. Its design, workings and accessories are subject to change without warning due to continual product development.

We hope you enjoy your experience with Greenis, as you embark on a journey towards richer nutrition and better health!

Read all instructions before using.

Please ensure the current, voltage and frequency are in accordance with the standard in your country.

To avoid danger of electric shock, do not put main body (motor) in water (or any other liquid) or pour water onto the machine.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Close supervision is necessary when any appliance is used by or near children. Children shall not play with the appliance.

Please unplug the machine if it is to be in long-time disuse. Unplug from outlet when not in use, before putting on or taking o� parts and before cleaning.

Do not operate any appliance with damaged cord or plug or after the appli-ance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment.

It may cause fire, electric shock or human injury if using unauthorized parts & accessories or refitting machine without authorization.

DO NOT leave the machine unattended when it is in use.

When using the machine please ensure water or any other liquid in the jar does not exceed maximum scale marked on the jar surface.

DO NOT operate the machine with no ingredient or water inside the jar.

Please keep the machine away from intense heat. DO NOT place it on a cloth in case of damage to parts.

This product is intended for indoor use only. Do not use outdoors.

To reduce the risk of injury, never place cutter-assembly blades on base with-out jar properly attached.

Blades must be assembled, disassembled and changed by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

The use of attachments, including canning jars, not recommended by the man-ufacturer may cause a risk of injury to persons.

Do not let cord hang over edge of table or counter.

Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.

Be careful when handing the sharp cutting blades, emptying the jar and during cleaning.

Switch o� the appliance and disconnect from supply before disassembling, changing accessories, approaching parts that move in use and before cleaning.

Do avoid contact of moving parts.

DO NOT place any other implement like spoons, forks and knives into the jar as they may cause damage to blades and other parts.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as timer, or connected to a circuit that is regularly switched on and o� by the utility.


PRODUCT COMPONENTSPRODUCT COMPONENTS1. Safety switch2. Jar lid3. Jar4. Vacuum cap

Blending Jar

1.Vacuum valve2.Jar lid3.Upper seal ring4.Lower seal ring5.Blending jar6.Seal ring7.Blade assembly

Vacuum Storage Jar

8. Vacuum valve9. Jar lid10. Seal ring11. Vacuum storage jar12. Jar base

5. Main body6. Control switch7. Rubber foot

1

2

3

8

9

10

11

12

4

5

6

7


Rotate the “Start/Stop” control dial to select desired function.

Press “Start/Stop” button to start or stop the machine.

The machine will work to remove the air from the jar for vacuum storage or antioxidation.

The machine will blend at high speed (usually for hard food ingredients).

The machine will remove the air from inside the jar and then blend.

PRODUCT COMPONENTS Control Panel

Start/Stop

Vacuum

High

Low

V-Blend (Vacuum Blend)

The machine will blend at low speed (usually for soft food ingredients).

Keep pressing “Start/Stop” button to blend.

Release the button to stop.

Assemble the jars properly before blending or using the vacuum function.

DO NOT open the vacuum cap and jar lid until blades come to a full stop.

DO NOT operate the jar when the machine is working.

DO NOT operate the machine with no ingredients or water inside the jar.

Make sure water or any other ingredients in the jar do not exceed maximum scale of the jar.

DO NOT blend more than 3 minutes at a time.

Pulse

WARNING


HOW TO USE IT HOW TO USE IT1. Press safety switch to open the vacuum cap, twist the jar anticlockwise while holding the jar handle and release it from the main body. Open the jar lid and clean the jar before using. Put food ingredients into the jar and cover the lid carefully.

Note: The vacuum valve should be firmly inserted in place, which will otherwise cause failure of vacuum function.

2. Place the jar back to the main body with the handle pointing to the “Unlock” symbol on the main body, twist it clockwise until the handle points to the “Lock” symbol, and close the vacuum cap.


HOW TO USE IT HOW TO USE IT3. Plug the machine and all lights of the panel will be on. Make sure the lights are all in white color. If they are all flashing in red color, it indicates the vacuum cap is not closed properly. Please open the cap and close it again.

4. Rotate the “Start/Stop” control dial to select desired function, and press “Start/Stop” button to process.

5. After blending finishes, press the safety dial to release the vacuum cap. Twist the jar anticlockwise until the handle points to the “Unlock” symbol and take out the jar. Lift the vacuum valve on the jar lid while air naturally comes back into the jar so that you are able to open the lid (otherwise you can’t open the lid). Open the lid and serve the result.

If you want to stop the machine during work, press “Start/Stop” button.

When using “Pulse” function, you should keep pressing “Start/Stop” button and when your finger removes, the machine will stop immediately.

If the “Vacuum” light keeps flashing and the machine makes a “Beep” sound when you

rotate the “Start/Stop” control dial, it indicates the blending jar is not installed properly. Please re-install the jar and make sure the jar handle is aligned with the “Lock” symbol on the main body.

If you don’t operate the machine in more than 5 minutes after plugging in, the machine will enter “energy-saving” mode. Press “Start/Stop” button to activate it.

In order to protect the machine and make operation easier for you, all functions on the menu work in pre-programmed cycles. The machine will automatically stop when one cycle finishes. When blending hard food ingredients, we suggest processing “High” cycle one more time in order to blend the food into better consistency.

If you want to store the blends or other food in the vacuum jar, please put the materials into the vacuum storage jar, close the lid properly, install it on the main body, and close the vacuum cap. Now the “Vacuum” light flashes. Press “Start/Stop” button to take out the air from the jar. The vacuum process will not stop until the air inside the jar is nearly sucked out.

Note:


HOW TO USE IT

CLEANING & MAINTENANCE

DO NOT immerse motor base or power cord into water or any other liquid.

Use soft cloth or sponge to clean the surface of jar.

Rinse the jar with clean water after each use. Do not immerse it entirely in water.

Lay down the jar horizontally in a drafty place or place it upside down to let it dry naturally.

Use soft cloth or sponge to clean the main body. Do not rinse the main body with water. Do not let any liquid come into the main body.

Do not use steel wool, abrasive or corrosive liquid detergent (Gasoline or acetone) to clean the machine.

Store the machine in dry place and avoid direct sunlight.

When drying the blending jar by placing it in an upside-down position, please wipe away leftover water at the bottom of the jar. Keep it away from the sink in case of any water dripping into the bottom of the jar and potentially rusting interior key compo-nents like metal bearing.

When disassembling the jars, do not damage the seal rings or miss any parts.

Please ensure the blender is unplugged before cleaning or maintenance.

Attention:


Attention:

TROUBLESHOOTING

Above are general problems users may encounter and possible solutions they can adopt. For other problems with the machine, please contact local after-sales for repair purpose. DO NOT open the machine and repair by yourself.

Fault Possible Cause Possible Solution

The lights are not on. Machine is not plugged in. Check the power connection.

All lights are flashing in red color.

The vacuum cap is not closed properly.

Open the vacuum cap and close it again.

The machine stops during work.

The selected cycle has finished.

Press “Start/Stop” button again to repeat cycle if necessary.

Failure to use the vacuum function.

1.The vacuum valve, blade or jar lid (seal ring) is broken or not installed properly. 2.The vacuum cap is not closed properly.

1.Make sure all parts of the jar are in good condition and installed properly.2. Open the vacuum cap and close it again.

Liquid leaks from the blending jar.

1. The jar lid is not closed properly.2. The vacuum valve or seal ring is broken.

1. Assemble the jar and its parts properly.2. Check the vacuum valve and seal rings. (Replace it/them if found broken.)

Failure to select program and the machine makes a “Beep” sound when rotating the “Start/Stop” control dial.

1. The blending jar is not installed at right position.2. A vacuum storage jar is used.

1. Re-install the blending jar and make sure the jar handle points to the “Lock” symbol on the main body.2. It’s normal.

WHAT’S IN THE BOX

SPECIFICATIONModel

Voltage/Frequency

Rated power

Product weight

Product dimensions

F-9200

120V a.c. 60Hz

750W

4.2kg

205*185*455mm

Main body

Blending jar set

Vacuum storage jar

User manual

1 unit

1 set

1 unit

1 unit

Correct Disposal of this product

This marking indicates that this product should not be disposed with other house-hold wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.


vacuum blender...ningbo greenis home appliances co., ltd. vacuum blender f-9200 01 greenis vacuum...

Documents