uxm lte/lte-a pro application feature comparison

Find us at www.keysight.com

UXM LTE/LTE-A Pro Application Feature Comparison

For more information on the options, part numbers, configuring your UXM instrument,

upgrades, and licenses, view the Keysight UXM Wireless Test Set Configuration Guide,

5991-4078EN. Note: The latest MEU license is available via the E7535A-MEU Minor

Enhancement Update and applies to all formats installed on the test set.

LTE Fundamentals E7530A

Test Application

E7630A

A.01

E7630A

A.02

E7630A

A.03

E7630A

A.04

First Available

in Revision

Supported cells = 21 Yes Yes Yes Yes Yes 1.1.1.0

Supported cells = 31 Yes MEUv1.003 MEUv1.003 Yes Yes 1.3.1.0

Supported cells = 41 Yes MEUv1.004 MEUv1.004 MEUv1.004 Yes 1.4.1.0

Supported cells = 51 Yes MEUv1.060 MEUv1.060 MEUv1.060 MEUv1.060 1.6.1.0

Two intra-band cells in single TRX set (i.e. floating cells)

Yes Yes Yes Yes Yes 1.6.1.0

Non-signaling mode Yes Yes Yes Yes Yes 1.1.1.0

Basic cell emulation (Stack mode)


Advanced cell emulation (Scenario mode)


CW mode Yes MEUv1.003 MEUv1.003 Yes Yes 1.3.1.0

CW impairments MEUv1.060 MEUv1.060 MEUv1.060 MEUv1.060 MEUv1.060 1.6.1.0

https://www.keysight.com/us/en/assets/7018-04308/configuration-guides/5991-4078.pdf



LTE Fundamentals E7530A

Test Application

E7630A

A.01

E7630A

A.02

E7630A

A.03

E7630A

A.04

First Available

in Revision

LTE band 32 Yes MEUv1.003 MEUv1.003 Yes Yes 1.3.1.0

3GPP frequency bands 45, 65 and 66

MEUv1.060 MEUv1.060 MEUv1.060 MEUv1.060 MEUv1.060 1.6.1.0

3GPP frequency bands 48, 67, 68, 69, 70 and 71


3GPP frequency band 461, 5 E7530A-FFP-0L1 E7530A-FFP-

0L1 E7530A-FFP-

0L1 E7530A-FFP-

0L1 E7530A-FFP-

0L1 1.8.1.0

LTE-U (bands 252, 255)1, 5 Yes MEUv1.004 MEUv1.004 MEUv1.004 Yes 1.4.1.0

LTE-U CSAT (emulated via

duty cycle)1, 5 E7530A-FFP-0L1

E7530A-FFP-0L1

E7530A-FFP-0L1

E7530A-FFP-0L1

E7530A-FFP-0L1

1.8.1.0

Rel-13 LAA 1, 5 E7530A-FFP-0L1 E7530A-FFP-

0L1 E7530A-FFP-

0L1 E7530A-FFP-

0L1 E7530A-FFP-

0L1 1.8.1.0

Dual device parallel RF test in one UXM (including non-IP

DSDA)1


Dual IP device test in one UXM (e.g. dual-SIM/DSDA, UE-to-UE

VoLTE calls, etc.)1, 4

E7515A-D01, E7530A-FFP-0P1

E7515A-D01 E7515A-D01 E7515A-D01 E7515A-D01 1.6.1.0

Internal applications server E7515A-S01 E7515A-S01 E7515A-S01 E7515A-S01 E7515A-S01 1.2.2.0

Channel emulation (fading) E7515A-C01 E7515A-C01 E7515A-C01 E7515A-C01 E7515A-C01 1.1.1.0

Enhanced DL channel emulation (MIMO OTA, SCME) E7515A-C023 E7515A-C023 E7515A-C023 E7515A-C023 E7515A-C023 1.5.1.0

Message viewer (application UI) Yes Yes Yes Yes Yes 1.1.1.0

Wireshark protocol logging and analysis

E7515A-L01 E7515A-L01 E7515A-L01 E7515A-L01 E7515A-L01 1.2.1.0

1. May require more than one TRX set and/or more than one UXM (connected in an array). See the Keysight UXM Wireless Test Set Configuration Guide, li terature number 5991-4078EN.

2. First available in the E7530A at 1.5.1.0. 3. Requires other feature option(s) as a pre-requisite. See the Keysight UXM Wireless Test Set Configuration Guide,

literature number 5991-4078EN. 4. VoLTE calls require Keysight E6966B IMS-SIP server and/or client. 5. Requires E7515A-506 for component carriers in unlicensed spectrum, and carrier aggregation option(s) for the

desired number of carriers. Also, LAA requires both FDD and TDD base options and FDD and TDD carrier aggregation options (as the PCC for LAA must be FDD, but the SCC are in a TDD band).







LTE Data Throughput, MIMO, and

Carrier Aggregation (CA)

E7530A

Test Application

E7630A

A.01

E7630A

A.02

E7630A

A.03

E7630A

A.04

First Available

in Revision

UL and DL fixed MAC padding


UL QPSK, 16 QAM Yes Yes Yes Yes Yes 1.1.1.0

UL 64 QAM E7530A-FFP-0M1 E7530A-FFP-

0M1 E7530A-FFP-

0M1 Yes Yes 1.3.1.0

DL QPSK, 16 QAM, 64 QAM


DL 256 QAM E7530A-FFP-0M2 E7530A-FFP-

0M2 E7530A-FFP-

0M2 E7530A-FFP-

0M2 Yes 1.4.1.0

IP data E7530A-FFP-0P1 Yes Yes Yes Yes 1.1.1.01

2CC DL CA (FDD)2 E7530A-AFP-FDD

E7530A-AFP-FDD

Yes Yes Yes 1.1.1.0

3CC DL CA (FDD)2 E7530A-DFP-FDD3

E7530A-DFP-

FDD3

E7530A-DFP-

FDD3

Yes Yes 1.3.1.0

4CC DL CA (FDD)2 E7530A-EFP-FDD3

E7530A-EFP-

FDD3

E7530A-EFP-

FDD3

E7530A-EFP-

FDD3

Yes 1.4.1.0

5CC DL CA (FDD)2 E7530A-EFP-FD53

E7530A-EFP-

FD53

E7530A-EFP-

FD53

E7530A-EFP-

FD53

E7530A-EFP-

FD53

1.6.1.0

2CC UL CA (FDD)2 (see LTE-A measurements table)

E7530A-CFP-FDD3

E7530A-CFP-

FDD3

Yes Yes Yes 1.2.1.0

2CC DL CA (TDD)2 E7530A-AFP-TDD

E7530A-AFP-TDD

E7530A-AFP-TDD

Yes Yes 1.3.1.0

3CC DL CA (TDD)2 E7530A-DFP-TDD3

E7530A-DFP-

TDD3

E7530A-DFP-

TDD3

E7530A-DFP-

TDD3

Yes 1.4.1.0

4CC DL CA (TDD)2 E7530A-EFP-TDD3

E7530A-EFP-

TDD3

E7530A-EFP-

TDD3

E7530A-EFP-

TDD3

Yes 1.4.1.0

5CC DL CA (TDD)2 E7530A-EFP-TD53

E7530A-EFP-

TD53

E7530A-EFP-

TD53

E7530A-EFP-

TD53

E7530A-EFP-

TD53

1.6.1.0

2CC UL CA (TDD)2 (see LTE-A measurements table)

E7530A-CFP-TDD3

E7530A-CFP-

TDD3

E7530A-CFP-

TDD3

Yes Yes 1.3.1.0

FDD-TDD mixed CA (PCC

must be FDD)2

E7530A-nFP-xDD4

E7530A-nFP-

xDD4

Yes Yes Yes 1.4.1.0

2x2 DL MIMO Yes Yes Yes Yes Yes 1.1.1.0

4x2 DL MIMO E7530A-BFP E7530A-BFP Yes Yes Yes 1.1.1.0

4x4 DL MIMO2 E7530A-BFP-0D1

E7530A-BFP-0D1

E7530A-BFP-0D1

E7530A-BFP-0D1

E7530A-BFP-0D1

1.5.1.0


LTE Data Throughput, MIMO, and

Carrier Aggregation (CA)

E7530A

Test Application

E7630A

A.01

E7630A

A.02

E7630A

A.03

E7630A

A.04

First Available

in Revision

1x4, 2x4 DL MIMO2 E7530A-BFP-0D1

E7530A-BFP-0D1

E7530A-BFP-0D1

E7530A-BFP-0D1

E7530A-BFP-0D1

1.6.1.0

8x2 DL MIMO E7530A-BFP-0D23

E7530A-BFP-

0D23

E7530A-BFP-

0D23

E7530A-BFP-

0D23

E7530A-BFP-

0D23

1.6.1.0

8x4 DL MIMO2 E7530A-BFP-0D33

E7530A-BFP-

0D33

E7530A-BFP-

0D33

E7530A-BFP-

0D33

E7530A-BFP-

0D33

1.6.1.0

Transmission Mode 9 (TM9)

E7530A-FFP-0T1 E7530A-FFP-

0T1 E7530A-FFP-

0T1 E7530A-FFP-

0T1 E7530A-FFP-

0T1 1.5.1.0

BLER/Throughput – IP E7530A-FFP-0P1 Yes Yes Yes Yes 1.1.1.01

BLER/Throughput - OTA Yes Yes Yes Yes Yes 1.1.1.0

Max throughput for UE category

E7530A-FFP-0P1 Yes Yes Yes Yes 1.3.1.01

Integrated iPerf MEUv1.060 MEUv1.060 MEUv1.060 MEUv1.060 MEUv1.060 1.6.1.0

1. First available in the E7530A at 1.5.1.0. 2. May require more than one TRX set and/or more than one UXM (connected in an array ). See the Keysight UXM

Wireless Test Set Configuration Guide, literature number 5991 -4078EN. 3. Requires other feature option(s) as a pre-requisite. See the Keysight UXM Wireless Test Set Configuration Guide,

literature number 5991-4078EN. 4. To aggregate any number of mixed FDD and TDD carriers, you must have both an FDD and TDD license for the

desired number of carriers. For example, to mix any FDD/TDD combination of three component carriers, you must have both a 3CC DL CA (FDD) and a 3CC DL CA (TDD) license.

LTE Detailed Network Behavior E7530A

Test Application E7630A A.01 E7630A A.02 E7630A A.03 E7630A A.04

First Available

in Revision

Page/Release Yes Yes Yes Yes Yes 1.2.1.0

Cat 0 (also known as M2M) Yes Yes Yes Yes Yes 1.4.1.0

NB-IoT (3GPP Cat-NB1) E7530A-GFP-

0NB1

E7530A-GFP-0NB

E7530A-GFP-0NB

E7530A-GFP-0NB

E7530A-GFP-0NB

1.7.1.0

eMTC CAT-M1 E7530A-GFP-

0M11

E7530A-GFP-0M1

E7530A-GFP-0M1

E7530A-GFP-0M1

E7530A-GFP-0M1

1.9.1.0

Connected mode DRX (FDD) Yes Yes Yes Yes Yes 1.2.1.02

Connected mode DRX (TDD) Yes MEUv1.002 Yes Yes Yes 1.2.1.02

Connected mode eDRX (NB-IoT) E7530A-FFP-002, E7530A-

GFP-0NB

E7530A-FFP-002, E7530A-

GFP-0NB

E7530A-FFP-002, E7530A-

GFP-0NB

E7530A-FFP-002, E7530A-

GFP-0NB

E7530A-FFP-002, E7530A-

GFP-0NB 1.7.1.0

Connected mode eDRX (eMTC CAT-M1)

E7530A-FFP-002, E7530A-

GFP-0M1

E7530A-FFP-002, E7530A-

GFP-0M1

E7530A-FFP-002, E7530A-

GFP-0M1

E7530A-FFP-002, E7530A-

GFP-0M1

E7530A-FFP-002, E7530A-

GFP-0M1 1.9.1.0






LTE Detailed Network Behavior E7530A


First Available

in Revision

Idle mode eDRX (NB-IoT) E7530A-FFP-002, E7530A-

GFP-0NB

E7530A-FFP-002, E7530A-

GFP-0NB

E7530A-FFP-002, E7530A-

GFP-0NB

E7530A-FFP-002, E7530A-

GFP-0NB

E7530A-FFP-002, E7530A-

GFP-0NB 1.8.1.0

Idle mode eDRX (eMTC CAT-M1)

E7530A-FFP-002,

E7530A-GFP-0M1

E7530A-FFP-002,

E7530A-GFP-0M1

E7530A-FFP-002,

E7530A-GFP-0M1

E7530A-FFP-002,

E7530A-GFP-0M1

E7530A-FFP-002,

E7530A-GFP-0M1

1.9.1.0

Battery drain for DRX MEUv1.060 MEUv1.060 MEUv1.060 MEUv1.060 MEUv1.060 1.6.1.0

P0_UE_PUSCH (RBC) Yes MEUv1.003 MEUv1.003 Yes Yes 1.3.1.0

Periodic trigger: frame, SF Yes MEUv1.003 MEUv1.003 Yes Yes 1.3.1.0

Special SF config 0 to 8 (TDD) Yes Yes Yes Yes Yes 1.1.1.0

Special SF config 9 (TDD) Yes MEUv1.003 MEUv1.003 Yes Yes 1.3.1.0

Carrier aggregation PUCCH format

E7530A-AFP-xDD

E7530A-AFP-xDD

E7530A-AFP-xDD

Yes Yes 1.3.1.0

Reference measurement channels quick setup


(F)eICIC E7530A-FFP-

001 E7530A-FFP-

001 E7530A-FFP-

001 Yes Yes 1.3.1.0

Soft channel bits setting Yes Yes Yes Yes Yes 1.3.1.0

“ANY” HARQ feedback handling E7530A-AFP-

xDD E7530A-AFP-

xDD E7530A-AFP-

xDD Yes Yes 1.3.1.0

CQI/PMI config index 2 Yes MEUv1.003 MEUv1.003 Yes Yes 1.3.1.0

RI reporting config index 2 Yes MEUv1.003 MEUv1.003 Yes Yes 1.3.1.0

TAC/SMS auto paging Yes MEUv1.003 MEUv1.003 Yes Yes 1.3.1.02

Request UE identities Yes MEUv1.003 MEUv1.003 Yes Yes 1.3.1.0

ETWS/CMAS in scenario mode Yes MEUv1.002 Yes Yes Yes 1.2.1.02

CMAS in stack mode MEUv1.070 MEUv1.070 MEUv1.070 MEUv1.070 MEUv1.070 1.7.1.0

1. NB-IoT and eMTC CAT-M1 require presence of either the FDD or TDD base option (e.g. E7530A -1FP-FDD, E7530A-

1FP-TDD, E7535A-1FP), and E7530A-FFP-0P1 for IP data connectivity 2. First available in the E7530A at 1.5.1.0.


LTE Detailed Network Behavior (Continued)

E7530A

Test Application

E7630A

A.01

E7630A

A.02

E7630A

A.03

E7630A

A.04

First Available

in Revision

DL resource allocation Type 0/2 selection


Rel-10 multi-cluster PUSCH


LAC setting Yes MEUv1.004 MEUv1.004 MEUv1.004 Yes 1.4.1.0

QCI setting Yes MEUv1.004 MEUv1.004 MEUv1.004 Yes 1.4.1.0

Include EPC network features support info

Yes MEUv1.004 MEUv1.004 MEUv1.004 Yes 1.4.1.0

pSRS-Offset MEUv1.060 MEUv1.060 MEUv1.060 MEUv1.060 MEUv1.060 1.6.1.0

RLC statistics (RUI only) MEUv1.060 MEUv1.060 MEUv1.060 MEUv1.060 MEUv1.060 1.6.1.0

UE test mode MEUv1.060 MEUv1.060 MEUv1.060 MEUv1.060 MEUv1.060 1.6.1.0

Auto restart of UL SPS based on SR frequency


Automatic MAC scheduler mode


Send NAS and RRC messages


LTE Message Editor

(for use in Scenario mode)

E7530A

Test Application

E7630A

A.01

E7630A

A.02

E7630A

A.03

E7630A

A.04

First Available

in Revision

Segmented SI Yes Yes Yes Yes Yes 1.2.1.01

SI sets Yes MEUv1.002 Yes Yes Yes 1.2.1.01

Bearer resource modification support


RRC/NAS Release 11 Yes Yes Yes Yes Yes 1.3.1.01

RRC/NAS Release 12 Yes Yes Yes Yes Yes 1.4.1.01


LTE Voice and Connectivity

E7530A

Test Application

E7630A

A.01

E7630A

A.02

E7630A

A.03

E7630A

A.04

First Available

in Revision

VoLTE (FDD) E7530A-FFP-

0P12

Yes Yes Yes Yes 1.2.1.01

VoLTE (TDD) E7530A-FFP-

0P12

MEUv1.002 Yes Yes Yes 1.2.1.01

RoHCv13 Yes Yes Yes Yes Yes 1.2.1.01

RoHC profiles 2, 3, and 4 for NB-IoT

E7530A-GFP-0NB

E7530A-GFP-0NB

E7530A-GFP-0NB

E7530A-GFP-0NB

E7530A-GFP-0NB

1.8.1.0

IMS registration only Yes Yes Yes Yes Yes 1.2.1.0

IMS-SIP E7530A-FFP-

0P12


IPv4 Yes Yes Yes Yes Yes 1.2.1.0

IPv6 Yes Yes Yes Yes Yes 1.2.1.0

IPv4v6 Yes Yes Yes Yes Yes 1.2.1.0

Multiple PDN Yes Yes Yes Yes Yes 1.2.1.01

Dedicated bearers Yes Yes Yes Yes Yes 1.2.1.01

Ciphering Yes Yes Yes Yes Yes 1.2.1.0

Milenage Yes Yes Yes Yes Yes 1.2.1.0

SPS (FDD)3 Yes2


SPS (TDD) 3 Yes2 MEUv1.002 Yes Yes Yes 1.2.1.01

TTI bundling (FDD)3 Yes2


TTI bundling (TDD)3 Yes2

MEUv1.002 Yes Yes Yes 1.2.1.01

IMS emergency call E7530A-FFP-

0P12


WLAN calling/offload2, 4

E7530A-FFP-0W1,

E7530A-FFP-0H1

E7530A-FFP-0W1

E7530A-FFP-0W1

E7530A-FFP-0W1

E7530A-FFP-0W1

1.6.1.0

WLAN offload IP flow

mobility (IFOM)2,4

E7530A-FFP-0W1,

E7530A-FFP-0H1

E7530A-FFP-0W1

E7530A-FFP-0W1

E7530A-FFP-0W1

E7530A-FFP-0W1

1.7.1.0

1. First available in the E7530A at 1.5.1.0. 2. Although VoLTE-related settings are included in the base TA, VoLTE calls require the E7530A -FFP-0P1 IP data

option and Keysight E6966B IMS-SIP server and/or client. 3. Available in scenario mode only. 4. WLAN calling requires an IMS-SIP server and client, such as the Keysight E6966B.


LTE and interRAT Mobility E7530A

Test Application

E7630A

A.01, A.02

E7630A

A.03, A.04

First Available

in Revision

Blind handover Yes Yes Yes 1.1.1.0

Blind handover including release with redirect

Yes Yes Yes 1.2.1.0

Blind handover with bandwidth change

Yes MEUv1.003 Yes 1.3.1.0

Cell reselection with W-CDMA1, 2 Yes Yes Yes 1.4.1.0

Cell reselection with GSM, TD-

SCDMA1, 2

Yes Yes Yes 1.6.1.0

Cell reselection with W-CDMA,

with PDP active1, 3

E7530A-FFP-0H1, E7530A-FFP-0P1

Yes Yes 1.4.1.04

Cell reselection with GSM, TD-

SCDMA, with PDP active1, 3


Yes Yes 1.6.1.0

PS-HO LTE > W-CDMA1, 3


Yes Yes 1.4.1.04

PS-HO W-CDMA > LTE1, 3


Yes Yes 1.6.1.0

PS-HO LTE > TD-SCDMA1, 3


Yes Yes 1.6.1.0

CSFB/SRVCC settings Yes Yes Yes 1.4.1.04

SRVCC–to-W-CDMA1, 5, 6


Yes Yes 1.4.1.04

SRVCC-to-GSM1, 5, 6


Yes Yes 1.6.1.0

CSFB-to-W-CDMA1, 7


Yes Yes 1.4.1.04

CSFB-to-GSM1, 7


Yes Yes 1.6.1.0

CSFB-to-TD-SCDMA1, 7


Yes Yes 1.6.1.0

SMS-over-SGs W-CDMA1, 6


Yes Yes 1.4.1.04

SMS-over-SGs GSM1, 6


Yes Yes 1.6.1.0

Intra-frequency LTE<>LTE HO1


Yes Yes 1.2.1.04

Inter-frequency LTE<>LTE HO1


Yes Yes 1.2.1.04

LTE handovers within a UXM

array1


MEUv1.003 Yes 1.3.1.04


LTE and interRAT Mobility E7530A

Test Application

E7630A

A.01, A.02

E7630A

A.03, A.04

First Available

in Revision

LTE serving cell meas report Yes Yes Yes 1.2.1.0

LTE neighbor cell meas report7 Yes Yes Yes 1.2.1.04

LTE measurement GAPs Yes Yes Yes 1.2.1.0

Target cell auto-config handovers E7530A-FFP-0H1 Yes Yes 1.4.1.04

Event-triggered handovers and

measurement reports (RUI only)9

E7530A-FFP-0H2 E7530A-FFP-0H2 E7530A-FFP-0H2 1.8.1.0

Neighbor cell definition in stack

mode (RUI only)9


Enhanced CA handovers (PCC/SCC swap, HO with >2CC)

(RUI only)9


1. Requires two or more TRX sets (within one UXM or two UXMs connected in an array). 2. Requires E7523A W-CDMA/HSPA+, E7521A GSM/GPRS/EGPRS, and/or E7529A TD -SCDMA/HSPA test

application(s). 3. Requires E7523A W-CDMA/HSPA+, E7521A GSM/GPRS/EGPRS, and/or E7529A TD -SCDMA/HSPA test

application(s), with corresponding E75xxA-FFP-0H1 handovers option(s) and E75xxA-FFP-0P1 IP data option(s). 4. First available in the E7530A at 1.5.1.0. 5. VoLTE calls require IP data and Keysight E6966B IMS-SIP server and/or client. 6. Requires E7523A W-CDMA/HSPA+, E7521A GSM/GPRS/EGPRS, and/or E7529A TD -SCDMA/HSPA test

application(s), with corresponding E75xxA-FFP-0H1 handovers option(s). 7. Requires E7523A W-CDMA/HSPA+, E7521A GSM/GPRS/EGPRS, and/or E7529A TD -SCDMA/HSPA test

application(s) for voice-only CSFB. E75xxA-FFP-0H1 handovers option(s) and E75xxA-FFP-0P1 IP data option(s) also required for voice + data CSFB.

8. Available in scenario mode only. 9. Requires other feature option(s) as a pre-requisite, including carrier aggregation option(s) for the desired number of

carriers. See the Keysight UXM Wireless Test Set Configuration Guide, li terature number 5991- 4078EN.

LTE Measurements

E7530A

Test Application

E7630A

A.01

E7630A

A.02

E7630A

A.03

E7630A

A.04

First Available

in Revision

6.2.2 UE maximum output power Yes Yes Yes Yes Yes 1.2.1.0

6.2.3 Maximum power reduction (MPR)


6.2.4 Additional MPR Yes Yes Yes Yes Yes 1.2.1.0

6.2.5 Configured UE transmitted output power


6.3.2 Minimum output power Yes Yes Yes Yes Yes 1.2.1.0

6.3.4.1 General ON/OFF time mask Yes Yes Yes Yes Yes 1.2.1.0

6.3.4.2.1 PRACH time mask Yes Yes Yes Yes Yes 1.2.1.0

6.3.4.2.2 SRS time mask Yes Yes Yes Yes Yes 1.2.1.0

6.3.5.1 Power control absolute power tolerance





LTE Measurements

E7530A

Test Application

E7630A

A.01

E7630A

A.02

E7630A

A.03

E7630A

A.04

First Available

in Revision

6.3.5.2 Power control relative power tolerance


6.3.5.3 Aggregate power control tolerance


6.5.1 Frequency error Yes Yes Yes Yes Yes 1.2.1.0

6.5.2.1 A PUSCH-EVM with exclusion period


6.5.2.1 Error vector magnitude (EVM) PUCCH, PUSCH


6.5.2.1 Error vector magnitude (EVM) PRACH


6.5.2.2 Carrier leakage Yes Yes Yes Yes Yes 1.2.1.0

6.5.2.3 In-band emissions for non-allocated RB


6.5.2.4 EVM equalizer spectrum flatness


6.6.1 Occupied bandwidth Yes Yes Yes Yes Yes 1.2.1.0

6.6.2.1 Spectrum emission mask (SEM)


6.6.2.2 Additional spectrum emission mask


6.6.2.3 Adjacent channel leakage power ratio (ACLR/ACP)


6.6.3.1 Transmitter spurious emissions Yes1 Yes1

Yes1 Yes1

Yes1 1.2.1.0

6.6.3.2 Spurious emission band UE co-existence

Yes1 Yes1

Yes1 Yes1

Yes1 1.2.1.0

6.6.3.3 Additional spurious emissions Yes1 Yes1

Yes1 Yes1

Yes1 1.2.1.0

6.7 Transmit intermodulation Yes1 Yes1

Yes1 Yes1

Yes1 1.2.1.0

CEVM additional in-band emissions and spectral flatness results (via RUI)

T908xB-BFP (MEUv1.050)





1.5.1.0

Enhanced X-Series Meas App UI for LTE/LTE-A

T908xC-1FP (MEUv1.070)





1.7.1.0

1. Requires external signal analyzer.


LTE Measurements (Continued) E7530A


First

Available in Revision

7.3 Receiver sensitivity level Yes Yes Yes Yes Yes 1.2.1.0

7.4 Maximum input level Yes Yes Yes Yes Yes 1.2.1.0

7.5 Adjacent channel selectivity (ACS)

Yes, use Cell2 Yes1 Yes, use Cell2 Yes, use Cell2 Yes, use Cell2 1.3.1.0

7.6.1 In-band blocking Yes, use Cell2 Yes1 Yes, use Cell2 Yes, use Cell2 Yes, use Cell2 1.3.1.0

7.6.2 Out-of-band blocking Yes, use Cell2 Yes1 Yes1

Yes, use Cell2 Yes, use Cell2 1.3.1.0

7.6.3 Narrow band blocking Yes, use Cell2 Yes1 Yes1


7.7 Spurious response Yes, use Cell2 Yes1 Yes1


7.8.1 Wide band intermodulation Yes1 Yes1

Yes1 Yes1

Yes1 1.2.1.0

7.9 Spurious emissions Yes2 Yes2

Yes2 Yes2

Yes2 1.2.1.0

Fast OTA receiver measurements (early verdict)


1. Requires external signal generator. 2. Requires external signal analyzer.

LTE-A Measurements E7530A

Test Application

E7630A

A.01

E7630A

A.02

E7630A

A.03

E7630A

A.04

First Available

in Revision

6.2.2A.1 UE maximum output power for CA

E7530A-CFP-xDD2

E7530A-CFP-

xDD2

E7530A-CFP-xDD2 Yes Yes 1.3.1.0

6.2.3A.1 Maximum power reduction (MPR) for CA

E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.2.4A.1 Additional MPR for CA E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.2.5A.1 Configured UE transmitted output power for CA

E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.3.2A.1 Minimum output power for CA

E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.3.4A.1.1 General ON/OFF time mask for CA

E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.3.4A.2.1.1 PRACH time mask for CA

E7530A-CFP-xDD2

E7530A-CFP-

xDD2



LTE-A Measurements E7530A

Test Application

E7630A

A.01

E7630A

A.02

E7630A

A.03

E7630A

A.04

First Available

in Revision

6.3.4A.2.2.1 SRS time mask for CA E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.3.5A.1.1 Power control absolute power tolerance for CA

E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.3.5A.2.1 Power control relative power tolerance for CA

E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.3.5A.3.1 Aggregate power control tolerance for CA

E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.5.1A.1 Frequency error for CA E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.5.2A.1.1 Error vector magnitude (EVM) for CA

E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.5.2A.2 .1 Carrier leakage for CA E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.5.2A.3.1 In-band emissions for non-allocated RB for CA

E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.6.1A.1 Occupied bandwidth for CA

E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.6.2.1A.1 Spectrum emission mask for CA

E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.6.2.2A.1 Additional spectrum emission mask for CA

E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.6.2.3A.1 Adjacent channel leakage power ratio for CA

E7530A-CFP-xDD2

E7530A-CFP-

xDD2


6.6.3.1A.1 Transmitter spurious emissions for CA

E7530A-CFP-xDD1, 2

E7530A-CFP-

xDD2

E7530A-CFP-xDD2 Yes1

Yes1 1.3.1.0

6.6.3.2A.1 Spurious emission band UE co-existence for CA

E7530A-CFP-xDD1, 2

E7530A-CFP-

xDD2


Yes1 1.3.1.0

6.6.3.3A.1 Additional spurious emissions for CA

E7530A-CFP-xDD1, 2

E7530A-CFP-

xDD2


Yes1 1.3.1.0

6.7A.1 Transmit intermodulation for CA

E7530A-CFP-xDD1, 2

E7530A-CFP-

xDD2


Yes1 1.3.1.0

FDD inter-band UL CA measurements

E7530A-CFP-FDD2

E7530A-CFP-

FDD2

E7530A-CFP-FDD2

E7530A-CFP-

FDD2

Yes 1.4.1.0

TDD inter-band UL CA measurements

E7530A-CFP-TDD2

E7530A-CFP-

TDD2

E7530A-CFP-TDD2

E7530A-CFP-

TDD2

Yes 1.4.1.0

1. Requires external signal analyzer. 2. Requires other feature option(s) as a pre-requisite. See the Keysight UXM Wireless Test Set Configuration Guide,

literature number 5991-4078EN .




LTE-A Measurements (Continued) E7530A


First Available in Revision

7.3A Receiver sensitivity level for CA

E7530A-CFP-

xDD2

E7530A-CFP-

xDD2

E7530A-CFP-

xDD2

Yes Yes 1.3.1.0

7.4A Maximum input level for CA

E7530A-CFP-

xDD2

E7530A-CFP-

xDD2

E7530A-CFP-

xDD2

Yes Yes 1.3.1.0

7.5A Adjacent channel selectivity (ACS) for CA

E7530A-CFP-

xDD1, 2

E7530A-CFP-

xDD1, 2

E7530A-CFP-

xDD1, 2

Yes1 Yes1

1.3.1.0

7.6.1A In-band blocking for CA E7530A-CFP-

xDD1, 2

E7530A-CFP-

xDD1, 2

E7530A-CFP-

xDD1, 2

Yes1 Yes1

1.3.1.0

7.6.2A Out-of-band blocking for CA

E7530A-CFP-

xDD1, 2

E7530A-CFP-

xDD1, 2

E7530A-CFP-

xDD1, 2

Yes1 Yes1

1.3.1.0

7.6.3A Narrow band blocking for CA

E7530A-CFP-

xDD1, 2

E7530A-CFP-

xDD1, 2

E7530A-CFP-

xDD1, 2

Yes1 Yes1

1.3.1.0

7.7A Spurious response for CA E7530A-CFP-

xDD1, 2

E7530A-CFP-

xDD1, 2

E7530A-CFP-

xDD1, 2

Yes1 Yes1

1.3.1.0

7.8.1A Wide band intermodulation for CA

E7530A-CFP-

xDD1, 2

E7530A-CFP-

xDD1, 2

E7530A-CFP-

xDD1, 2

Yes1 Yes1

1.3.1.0

1. Requires external signal generator. 2. Requires other feature option(s) as a pre-requisite. See the Keysight UXM Wireless Test Set Configuration Guide,

literature number 5991-4078EN.

NB-IoT Measurements E7530A Test Application E7630A Lab Application First Available in

Revision

6.2.2F UE maximum output power T9080C-3FP (E7530A-GFP-0NB) T9080C-3FP (E7530A-GFP-0NB) 1.8.1.0

6.2.3F Maximum power reduction (MPR) T9080C-3FP (E7530A-GFP-0NB) T9080C-3FP (E7530A-GFP-0NB) 1.8.1.0

6.2.5F Configured UE transmitted output power

T9080C-3FP (E7530A-GFP-0NB) T9080C-3FP (E7530A-GFP-0NB) 1.8.1.0

6.3.2F Minimum output power T9080C-3FP (E7530A-GFP-0NB) T9080C-3FP (E7530A-GFP-0NB) 1.8.1.0

6.3.3F Transmit OFF power T9080C-3FP (E7530A-GFP-0NB) T9080C-3FP (E7530A-GFP-0NB) 1.8.1.0

6.3.4F.1 General ON/OFF time mask T9080C-3FP (E7530A-GFP-0NB) T9080C-3FP (E7530A-GFP-0NB) 1.8.1.0

6.3.4F.2 NPRACH time mask T9080C-3FP (E7530A-GFP-0NB) T9080C-3FP (E7530A-GFP-0NB) 1.8.1.0

6.3.5F.1 Power control absolute power tolerance


6.3.5F.2 Power control relative power tolerance


6.3.5F.3 Aggregate power control tolerance T9080C-3FP (E7530A-GFP-0NB) T9080C-3FP (E7530A-GFP-0NB) 1.8.1.0




NB-IoT Measurements E7530A Test Application E7630A Lab Application First Available in

Revision

6.5.1F Frequency error T9080C-3FP (E7530A-GFP-0NB) T9080C-3FP (E7530A-GFP-0NB) 1.8.1.0

6.5.2.1F.1

Error vector magnitude (EVM) (no NPRACH demodulation)


6.5.2.2F Carrier leakage T9080C-3FP (E7530A-GFP-0NB) T9080C-3FP (E7530A-GFP-0NB) 1.8.1.0

6.5.2.3F In-band emissions for non-allocated RB


6.6.1F Occupied bandwidth T9080C-3FP (E7530A-GFP-0NB) T9080C-3FP (E7530A-GFP-0NB) 1.8.1.0

6.6.2.1F Spectrum Emission Mask T9080C-3FP (E7530A-GFP-0NB)1 T9080C-3FP (E7530A-GFP-0NB)1

1.8.1.0

6.6.2.3F Adjacent Channel Leakage power Ratio

T9080C-3FP (E7530A-GFP-0NB)1 T9080C-3FP (E7530A-GFP-0NB)1

1.8.1.0

6.6.3.1F Transmitter spurious emissions T9080C-3FP (E7530A-GFP-0NB)1 T9080C-3FP (E7530A-GFP-0NB)1

1.8.1.0

6.6.3.2F Spurious emission band UE co-existence

T9080C-3FP (E7530A-GFP-0NB)1 T9080C-3FP (E7530A-GFP-0NB)1

1.8.1.0

6.7F Transmit intermodulation T9080C-3FP (E7530A-GFP-0NB)1 T9080C-3FP (E7530A-GFP-0NB)1

1.8.1.0

7.3F Reference sensitivity level E7530A-GFP-0NB E7530A-GFP-0NB 1.7.1.0

7.4F Maximum input level E7530A-GFP-0NB E7530A-GFP-0NB 1.7.1.0

7.5F Adjacent Channel Selectivity (ACS)

E7530A-GFP-0NB E7530A-GFP-0NB 1.7.1.0

7.6.1F In-band blocking E7530A-GFP-0NB E7530A-GFP-0NB 1.7.1.0

7.6.2F Out-of-band blocking E7530A-GFP-0NB2 E7530A-GFP-0NB2

1.7.1.0

7.7F Spurious response E7530A-GFP-0NB2 E7530A-GFP-0NB2

1.7.1.0

7.8.1F Wide band Intermodulation E7530A-GFP-0NB2 E7530A-GFP-0NB2

1.7.1.0

1. Requires external signal analyzer. 2. Requires external signal generator


eMTC CAT-M1 Measurements E7530A Test Application E7630A Lab Application

First Available in

Revision

6.2.2EA UE Maximum Output Power for UE category M1 T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.2.3EA Maximum Power Reduction (MPR) for UE category M1

T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.2.4EA Additional Maximum Power Reduction (A-MPR) for UE category M1

T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.2.5EA Configured transmitted power for UE category M1 T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.3.2EA Minimum Output Power for UE category M1 T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.3.4EA.1 General ON/OFF time mask for UE category M1 T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.3.5EA.1 Power Control Absolute power tolerance for UE category M1

T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.3.5EA.2 Power Control Relative power tolerance for UE category M1

T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.3.5EA.3 Aggregate power control tolerance for UE category M1

T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.5.1EA Frequency Error for UE category M1 T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.5.2.1EA.1 Error Vector Magnitude for UE category M11

T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.5.2.1EA.2 PUSCH-EVM with exclusion period for UE category M1

T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.5.2.2EA Carrier leakage for UE category M1 T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.5.2.3EA In-band emissions for non-allocated RB for UE category M1

T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.5.2.4EA EVM equalizer spectrum flatness for UE category M1

T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.6.1EA Occupied bandwidth for UE category M1 T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.6.2.1EA Spectrum Emission Mask for UE category M1 T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.6.2.2EA Additional Spectrum Emission Mask for UE category M1

T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.6.2.3EA Adjacent Channel Leakage power Ratio for UE category M1

T9080C-3FP (E7530A-GFP-0M1)

T9080C-3FP (E7530A-GFP-0M1)

1.9.1.0

6.6.3EA.1 Transmitter Spurious emissions for UE category M1

T9080C-3FP (E7530A-GFP-

0M1)2

T9080C-3FP (E7530A-GFP-

0M1)2

1.9.1.0


eMTC CAT-M1 Measurements E7530A Test Application E7630A Lab Application

First Available in

Revision

6.6.3EA.2 Spurious emission band UE co-existence for UE category M1

T9080C-3FP (E7530A-GFP-

0M1)2

T9080C-3FP (E7530A-GFP-

0M1)2

1.9.1.0

6.6.3EA.3 Additional spurious emissions for UE category M1 T9080C-3FP (E7530A-GFP-

0M1)2

T9080C-3FP (E7530A-GFP-

0M1)2

1.9.1.0

6.7EA Transmit intermodulation for UE category M1 T9080C-3FP (E7530A-GFP-

0M1)2

T9080C-3FP (E7530A-GFP-

0M1)2

1.9.1.0

7.3EA Reference sensitivity level for UE category M1 E7530A-GFP-0M1 E7530A-GFP-0M1 1.9.1.0

7.4EA Maximum input level for UE category M1 E7530A-GFP-0M1 E7530A-GFP-0M1 1.9.1.0

7.5EA Adjacent Channel Selectivity (ACS)for UE category M1

E7530A-GFP-0M1 E7530A-GFP-0M1 1.9.1.0

7.6.1EA In-band blocking for UE category M1 E7530A-GFP-0M1 E7530A-GFP-0M1 1.9.1.0

7.6.2EA Out-of-band blocking for UE category M1 E7530A-GFP-0M13 E7530A-GFP-0M13

1.9.1.0

7.6.3EA Narrow band blocking for UE category M1 E7530A-GFP-0M13 E7530A-GFP-0M13

1.9.1.0

7.7EA Spurious response for UE category M1 E7530A-GFP-0M13 E7530A-GFP-0M13

1.9.1.0

7.8.1EA Wide band intermodulation for UE category M1 E7530A-GFP-0M13 E7530A-GFP-0M13

1.9.1.0

7.9EA Spurious emissions UE category M1 E7530A-GFP-0M13 E7530A-GFP-0M13

1.9.1.0

1.eMTC PRACH demodulation is under planning and to be confirmed. 2. Requires external signal analyzer and fil ters. 3. Requires external signal generator.

Find us at www.keysight.com This information is subject to change without notice. © Keysight Technologies, 2017 - 2021, Published in USA, June 23, 2021, 3121-1234.EN

Learn more at: www.keysight.com

For more information on Keysight Technologies’ products, applications or services,

please contact your local Keysight office. The complete list is available at:

www.keysight.com/find/contactus

For more information on RF measurements using the UXM, see the application note

Performing LTE and LTE-Advanced RF measurements with the E7515A UXM Wireless Test Set,

literature number 5992-0486EN.

For more information on the options, part numbers, configuring your UXM instrument, upgrades and

licenses view the

Keysight UXM Wireless Test Set Configuration Guide, literature number 5991-4078EN.

Note: RUI = Remote User Interface

http://www.keysight.com/find/uxm

www.keysight.com/find/uxm www.keysight.com/find/e7515a

https://www.keysight.com/us/en/assets/7018-07131/application-notes/5992-0486.pdf

https://www.keysight.com/us/en/assets/7018-07131/application-notes/5992-0486.pdf



http://www.keysight.com/find/uxm

uxm lte/lte-a pro application feature comparison

Documents