uvc - pond clarifier uv light - wiltec · uvc - pond clarifier uv light cuv-111 artikel 50110...

10
© by WilTec Wildanger Technik GmbH Seite 16 http://www.WilTec.de http://www.aoyue.eu Version 3.2017 http://www.teichtip.de Operation Manual UVC - Pond Clarifier UV Light CUV-111 ARTIKEL 50110 CUV-318 Artikel 50179 CUV-118 ARTIKEL 50113 CUV-324 Artikel 50184 CUV-136 ARTIKEL 50178 CUV-336 Artikel 50185 CUV-155 ARTIKEL 50100 CUV-618 Artikel 50186 CUV-172 ARTIKEL 50103 CUV-624 Artikel 50187 CUV-209 ARTIKEL 50111 CUV-636 Artikel 50188 CUV-218 ARTIKEL 50112 CUV-655 Artikel 50189 CUV-224 ARTIKEL 50101 CUV-672 Artikel 50191 CUV-236 ARTIKEL 50102 CUV-6110 Artikel 50198 CUV-272 ARTIKEL 50104 Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificant- ly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us.

Upload: lephuc

Post on 03-Mar-2019

231 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: UVC - Pond Clarifier UV Light - WilTec · UVC - Pond Clarifier UV Light CUV-111 ARTIKEL 50110 CUV-318 Artikel 50179 CUV-118 ARTIKEL 50113 CUV-324 Artikel 50184 CUV-136 ARTIKEL 50178

© by WilTec Wildanger Technik GmbH Seite 16 http://www.WilTec.de http://www.aoyue.eu Version 3.2017

http://www.teichtip.de

Operation Manual

UVC - Pond Clarifier UV Light

CUV-111 ARTIKEL 50110 CUV-318 Artikel 50179 CUV-118 ARTIKEL 50113 CUV-324 Artikel 50184 CUV-136 ARTIKEL 50178 CUV-336 Artikel 50185 CUV-155 ARTIKEL 50100 CUV-618 Artikel 50186 CUV-172 ARTIKEL 50103 CUV-624 Artikel 50187 CUV-209 ARTIKEL 50111 CUV-636 Artikel 50188 CUV-218 ARTIKEL 50112 CUV-655 Artikel 50189 CUV-224 ARTIKEL 50101 CUV-672 Artikel 50191 CUV-236 ARTIKEL 50102 CUV-6110 Artikel 50198 CUV-272 ARTIKEL 50104

Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificant-ly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us.

Page 2: UVC - Pond Clarifier UV Light - WilTec · UVC - Pond Clarifier UV Light CUV-111 ARTIKEL 50110 CUV-318 Artikel 50179 CUV-118 ARTIKEL 50113 CUV-324 Artikel 50184 CUV-136 ARTIKEL 50178

© by WilTec Wildanger Technik GmbH Seite 17 http://www.WilTec.de http://www.aoyue.eu Version 3.2017

http://www.teichtip.de

The information contained in this document is subject to change without prior notice. No part of this document can be copied or duplicated in another form without the prior written consent of Wiltec Wil-danger Technik GmbH. The Wiltec Wildanger Technik GmbH assumes no liability for any errors in this user manual or the connection diagram. Although Wiltec Wildanger Technik GmbH has made every effort to make sure that this user manual is complete, accurate and updated, errors cannot always be avoided. In the event of problems with this user manual please complete and send this form back to us. FAX-notification (+++49 2403 55592-15), from: ________________________________________ Name: ________________ Firm:_____________________ Tel/Fax:__________________ I would like to report the following mistakes: ___________________________________________________________________ Customer Service Wiltec Wildanger Technik GmbH e-mail: [email protected] Tel:++ +49 2403 55592-0

Introduction Thank you for purchasing this quality product. To minimize the risk of injury by means of fire or electric shock we urge that our clients take some basic safety precautions when using this device. Please read the operation instructions carefully and make sure you have understood its content. Always use a grounded power connection with the appropriate mains voltage. You can find the corre-sponding mains voltage on the type plate. If you have any doubts about the connection being ground-ed, have it checked by a qualified professional. Never use a faulty electric cable. Do not inspect the electrical part of the pressure pond filter in a wet or damp environment or when you are wet yourself and protect it from direct sunlight. Install this device in a safe location so that nobody can step on the cable, fall over or damage it. Make sure additionally you provide sufficient cooling through the ambient air and avoid heat accumulation. Disconnect the power plug before cleaning it and use only a damp cloth for cleaning. The electric part of the device contains no parts that can be inspected or serviced by the user. Leave the maintenance, adjustment and repair to qualified technical personnel. In case of unauthorised inter-vention the 2-year warranty is no longer valid! Keep these operation instructions safe.

Page 3: UVC - Pond Clarifier UV Light - WilTec · UVC - Pond Clarifier UV Light CUV-111 ARTIKEL 50110 CUV-318 Artikel 50179 CUV-118 ARTIKEL 50113 CUV-324 Artikel 50184 CUV-136 ARTIKEL 50178

© by WilTec Wildanger Technik GmbH Seite 18 http://www.WilTec.de http://www.aoyue.eu Version 3.2017

http://www.teichtip.de

Safety guideline

BEWARE:

The use of this device is allowed on standing bodies of water, garden ponds’ water or swimming ponds and their surrounding areas only with fault current protection-switch with a triggering nominal current up to 30mA (according to VDE 0100 Article 702 and 738). The device is not suitable for use in swimming pools, paddling pools and other bodies of water in which during operation people. The operation of the device during the stay of people in the danger zone is not allowed. Ask your electrician. The device is not intended for use by persons (including children) with impaired or limited physical, sensory and mental abilities or lack of experience and/or real knowledge, unless they are supervised by a person responsible for their safety or you follow the instructions made by this person how to use the device correctly. Children should be supervised to make sure that they do not play with the device.

ATTENTION:

• Run a visual inspection of the device before every use. Do not use the device if the safety ap-pliances are damaged or worn out. Never override safety regulations.

• Use the device exclusively according to the intended purpose stated in the instructions for use.

• You are responsible for the safety of the working environment. • If the cable or the plug is damaged due to external influences the cable must not be repaired!

It has to be replaced with a new one. This work can be carried out only by an electrician. • The voltage indicated on the type plate of the device of 230 Volt alternating voltage has to cor-

respond to the existent mains voltage. • Never lift, carry or fixate the device by using the power cable. • Make sure that the electrical plug connection is placed in a flood-proof area and is protected

from moisture. • Before working on the pond pump disconnect the appliance by taking the plug out of the sock-

et. • Avoid exposing the appliance to a direct water jet or rain. • The user is responsible for the compliance with location specific safety and installing regula-

tions. (Ask an electrician). • Consequential damage arising from flooded rooms caused by dysfunctions of the appliance

must be avoided by means of the appropriate measures. (installing an alarm system, reserve pump).

• In case of malfunction the repair work can be carried out only by a qualified electricial or the WilTec-service.

• The appliance must not run dry or with a completely closed intake port. • The appliance must not be used for swimming pools. • The device cannot be employed for potable water circuits.

Page 4: UVC - Pond Clarifier UV Light - WilTec · UVC - Pond Clarifier UV Light CUV-111 ARTIKEL 50110 CUV-318 Artikel 50179 CUV-118 ARTIKEL 50113 CUV-324 Artikel 50184 CUV-136 ARTIKEL 50178

© by WilTec Wildanger Technik GmbH Seite 19 http://www.WilTec.de http://www.aoyue.eu Version 3.2017

http://www.teichtip.de

l. The UVC filter should placed om somewhere that the water will not submerge it, and it should be 2 meters distance from the edge of the pond to the fitter. This equipment cannot be used under the water. 2.Before the water circulation, the electrical source of the UVC filer cannot be switched on. 3.Please place the UVC in the steady and safe spot, Because the UV light tube is made of quartz glass which is easy to broken. 4.Before all parts are installed completely, the electrical source cannot switch on. 5.lf the UV light tube or the body shell looks like broken, the equipment cannot be used. 6.When any person in the water, the UVC cannot be used. 7.Please make sure that the electrical voltage, frequency used are consistent with the indication on the UVC station. 8.When installing the equipment, the installation regulation of domestic should be followed. 9.Pull the connecting cable is forbidden. And please protect the connecting cable from heat, greasi-ness or sharpness. l. Make sure the max pressure of the body shell ensured is less than l.0bar. ll. When know the frost is coming, please move away UV filter. l2.When install the UV filter, p|ease not let it under the sunlight directly. l3.The dirtiness on the quartz tube will influence the effect of the equipment please clean the quartz tube in time. l4.In order to ensure the effect of the equipment, the UV light tube should be replaced after 8000hours' usage. l5.When the body shell is blocked with the sands rubbish, it may destroy the quartz tube. So please add the filter sponge in the inlet of the water pump. l6.UVC is harmful to the eyes and skin. Please do not watch UVC directly or let the skin approach to UVC. l7.When install or repair this equipment, the electrical source of the aquarium must be switched off. l8.The product must be installed horizontally and with the feet down. Other installation positions are prohibited for safety reason. 19.The UVC lamp installed in the unit is intended to kill algae and bacteria in the pond water. Even in small doses, its radiation is harmful for eyes and skin. 20.Never use the UVC lamp in a defective housing or outside the housing, or any other purpose other than that intended. The following restrictions apply to the unit: —Never use the unit to convey fluids to other than water. —Never use the unit without water. —Do not use for commercial or industrial purposes. Areas of application / function meadow This UVC unit ensures healthy fish and clear water. The water is pumped by a pump through the UV unit. There it flows past the UV lamp and the UVC radiation is exposed, whereby the in the water bac-teria, pathogens and floating algae are destroyed. The water is thus clear. This UVC unit ensures healthy fish and clear water. The water is pumped by a pump through the UV unit. There it flows past the UV lamp and the UVC radiation is exposed, whereby the in the water bac-teria, pathogens and floating algae are destroyed. The water is thus clear. Only for 1-Series (111, 155, 172 different 209): The Ballastvorschaltgeräte in the electrical supply line must not be in the water. If possible, dry and / or placing in water safer Umhül-lung. Only for series 2 (218, 224, 236, 272): The integrated spiral (helix) frees the quartz glass permanently from dirt and ensures a longer flow guidance. Thus, a longer contact time of the water with the UVC light is ensured, and thus, a better result can be obtained.) Only for 3-series (318, 324, 336): SunSun has a refined What-water loop, installed in the housing of the CUV-300 series, the water is displaced by the Wasserstörmung into a rotary motion. It is not ex-pensive to clean Helix verbaut.Gleichzeitig SunSun has a stainless steel mirror mon-Animal T which

Page 5: UVC - Pond Clarifier UV Light - WilTec · UVC - Pond Clarifier UV Light CUV-111 ARTIKEL 50110 CUV-318 Artikel 50179 CUV-118 ARTIKEL 50113 CUV-324 Artikel 50184 CUV-136 ARTIKEL 50178

© by WilTec Wildanger Technik GmbH Seite 20 http://www.WilTec.de http://www.aoyue.eu Version 3.2017

http://www.teichtip.de

ensures that the UV light is reflected. Light which was not absorbed directly, is mirrored in the pond water and can act again there. Thus, the contact time and the intensity of the water to be clarified is more than doubled with the UVC radiation. As for the 6-series (618, 624, 636, 655, 672) SunSun has installed in the housing of the CUV-600 just like in the CUV-300 series is a sophisticated water supply, the water is displaced by the Was-serstörmung into a rotary motion. There is no ornate to clean Helix verbaut.Gleichzeitig SunSun has a stainless steel mirror mounted, which ensures that the UV light is reflected. Light which was not ab-sorbed directly, is mirrored in the pond water and can act again there. Thus, the contact time and the intensity of the water to be clarified is more than doubled with the UVC radiation. For effective magnet-ization of the pond water 2 large ferrite magnets were installed in the housing. INSTRUCTION 1. This equipment can kill the harmful gems and algae in the aquarium and the pond which offer the heath environment to the fishes. 2.When the water under the irradiation of wavelength in 253.7nm's ultraviolet radiation in a short peri-od, the germ and pathogen in the water will be killed then. 3,This equipment is not sell with the pump, please buy it yourself. 4,Please connect the inlet pipe with the outlet of the water pump, 5.Please connect the outlet pipe with the other filter or the pond and fix it. After the inspection of the pipe an connecting part, the water circulation can be started then. 6,Please check it when the water started circulation or not after several minutes, 7.Turning on electrical source, the UV filter begin to work. 8,The detailed sketch map of usage can be pound in the packing box. Installation and connection

Installation location — This device can only be worked under the protection of the cover. It should be placed in some- where that water will not submerge it, and it should be installed 2 meters away from water. Connection — We would suggest choosing o hose that can have pressure of O bar. — Cut off the multistage hose toil according to the diameter of the hose. — Connect the multistage hose tail to the inlet or outlet, and fix with hose clip. — Put O—ring into the screw and connect to the device.

Page 6: UVC - Pond Clarifier UV Light - WilTec · UVC - Pond Clarifier UV Light CUV-111 ARTIKEL 50110 CUV-318 Artikel 50179 CUV-118 ARTIKEL 50113 CUV-324 Artikel 50184 CUV-136 ARTIKEL 50178

© by WilTec Wildanger Technik GmbH Seite 21 http://www.WilTec.de http://www.aoyue.eu Version 3.2017

http://www.teichtip.de

You can change the two inlet checking windows to water supply hose if necessary. Important: Connect the water pumps first, and then connect the UV device. Do not run the device without water. This device will be automatically turned on after the power cord is connected to the power supply. — The device is working if the blue light is turned on.

Model Watt Kabellänge Volt Liter/h Eingang/Auslass CUV-209 9 5 230V/50Hz 1000 20/25/32/40mm CUV-111 11 5 230V/50Hz 1200 20/25/32/40mm CUV-118/218 18 5 230V/50Hz 2500 20/25/32/40mm CUV-224 24 5 230V/50Hz 4500 20/25/32/40mm CUV-136/236 36 5 230V/50Hz 4500/6000 20/25/32/40mm CUV-155 55 5 230V/50Hz 5000 20/25/32/40mm CUV-172/272 72 2x 5 230V/50Hz 6000 20/25/32/40mm CUV-318 18 5 230V/50Hz 3000 20/25/32/40mm CUV-324 24 5 230V/50Hz 5000 20/25/32/40mm CUV-336 36 5 230V/50Hz 7000 20/25/32/40mm CUV-618 18 5 230V/50Hz 3000 20/25/32/40mm CUV-624 24 5 230V/50Hz 5000 20/25/32/40mm CUV-636 36 5 230V/50Hz 7000 20/25/32/40mm CUV-655 55 5 230V/50Hz 8000 20/25/32/40mm CUV-672 2 x 36 2 x 5 m 230V/50Hz 8000 20/25/32/40mm CUV-6110 2 x 55 2 x 5 m 230V/50Hz 8000 20/25/32/40mm Maintenance / Cleaning For maintenance and cleaning work is always in advance of the plug to pull. The device should be cleaned once a year. The UVC lamp should be replaced annually, since the power after a year amounts to only about 50%. Please note that the steps may vary slightly depending on the model. A. Pull out the power plug. B. Turn off the pump and make sure that it is not accidentally turned-on again. C. At the end of the power connector port of the UVC device Carefully disconnect the fitting. Remove the large screw at the top of the lamp and pull out the device button, you can switch the lamp. D. Use to pull a wrench or other tool the gap between the glass and shell apart. E. Then you can start cleaning. F. Clean the quartz sleeve from the outside with a damp cloth. Check the casing for damage before reassembling. G. Squeeze. The gap between device button and quartz glass The O-ring is the last part, which is set by the clamp screw to the correct position. H. We recommend to clean the quartz glass with a damp cloth. For cleaning please use only water, no means sharp objects (screwdriver, knife or similar).

Page 7: UVC - Pond Clarifier UV Light - WilTec · UVC - Pond Clarifier UV Light CUV-111 ARTIKEL 50110 CUV-318 Artikel 50179 CUV-118 ARTIKEL 50113 CUV-324 Artikel 50184 CUV-136 ARTIKEL 50178

© by WilTec Wildanger Technik GmbH Seite 22 http://www.WilTec.de http://www.aoyue.eu Version 3.2017

http://www.teichtip.de

I. If you reconnect the hose, make sure that there is in it no water. Please keep the hose with a dry cloth firmly. J. If you are running the new tubing, remove the clip, which can protect the clip from breaking. If the O-ring be broken, it must be replaced. K. Please make sure that all sealing parts are cleaned and are in their correct position, especially the O-ring. L. If you set the quartz glass back into position, make sure that it does not have any damage. M. Finally turn back on the power of the pump and turn on the device.

- 1: The light tube should be replaced after 8,000 hours use. — Turn the head according to the direction of arrow . — Take out the head according to the direction of arrow . — Take out the UV lamp according to the direction of arrow and replace it. Only for the UV lamp that have the same name, brand and power .Both inside and outside of the casing should be cleaned . — Loose the four screws by screwdriver. - Take out the brackets according to the direction of arrow. — Take out the quartz glass tube according to the direction of arrow. — Check the quartz glass tube and clean it with clean and wet cloth. (Please use vinegar to clean the quartz glass tube if there is much incrustation

Page 8: UVC - Pond Clarifier UV Light - WilTec · UVC - Pond Clarifier UV Light CUV-111 ARTIKEL 50110 CUV-318 Artikel 50179 CUV-118 ARTIKEL 50113 CUV-324 Artikel 50184 CUV-136 ARTIKEL 50178

© by WilTec Wildanger Technik GmbH Seite 23 http://www.WilTec.de http://www.aoyue.eu Version 3.2017

http://www.teichtip.de

CUV-1er Serie

CUV-2er Serie

Page 9: UVC - Pond Clarifier UV Light - WilTec · UVC - Pond Clarifier UV Light CUV-111 ARTIKEL 50110 CUV-318 Artikel 50179 CUV-118 ARTIKEL 50113 CUV-324 Artikel 50184 CUV-136 ARTIKEL 50178

© by WilTec Wildanger Technik GmbH Seite 24 http://www.WilTec.de http://www.aoyue.eu Version 3.2017

http://www.teichtip.de

CUV-3 Serie

1 Indikator-Glas 2 Gehäuse 3 1,5“ Mutter 4 Auslass 5 Dichtung 6 Mutter 7 Obere Halterung 8 Edelstahlgehäuse 9 O Ring 1 10 Schraube 11 UVC Anschlusseinheit 12 O Ring 2 13 UV Lampe 14 Quartzglashülse 15 Lampensockel

Page 10: UVC - Pond Clarifier UV Light - WilTec · UVC - Pond Clarifier UV Light CUV-111 ARTIKEL 50110 CUV-318 Artikel 50179 CUV-118 ARTIKEL 50113 CUV-324 Artikel 50184 CUV-136 ARTIKEL 50178

© by WilTec Wildanger Technik GmbH Seite 25 http://www.WilTec.de http://www.aoyue.eu Version 3.2017

http://www.teichtip.de

Disposal regulations EU guidelines regarding the disposal of scrap electric appliances (WEEE, 2002/96/EC) were imple-mented in the law related to electrical and electronic equipment and appliances. All Wiltec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste. The company Wiltec Technik GmbH has been registrated in the German registry EAR under the WEEE-registration number DE45283704. Disposal of used electrical and electronic appliances (intended for use in the countries of the European Union and other European countries with a separate collection system for these appliances). The logo on the article or on its packaging points out that this article must not be treated as normal house-hold waste but must be disposed to a recycling collec-tion point for electronic and electrical waste equip-ment. By contributing to the correct disposal of this article you protect the environment and the health of your fellow men. Environment and health are threat-ened by inappropriate disposal. Materials’ recycling helps reduce the consumption of raw materials. Additional information on recycling this article can be provided by your local community, municipal waste disposal facilities or the store where you purchased the article.

Address: WilTec Wildanger Technik GmbH

Königsbenden 12 / 28 D-52249 Eschweiler

Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions manual require the written permission of Wiltec Wildanger Technik GmbH.