using the makoti fabric collection designed by …...using the makoti fabric collection designed by...
TRANSCRIPT
Using the Makoti fabric collection designed by Stuart Hillard for
Craftcotton
Block 1– Think outside the box
Tutorial by Michelle Roberts from CreativeBlonde
Block 1 – 16” x 16” (finished size)
Please read through all the instructions, before starting your block
1.
1 4 3 2
Fabric requirements:
9” square from fabric 1
9” square cut from fabric 2
8 ½” square cut from fabric 3
9 ¼” square from fabric 4
Haberdashery Items
Basic Sewing supplies
Quilting ruler, rotary cutter/scissors
cutting mat
Iron
Let’s get sewing…
Cut the two 9” squares in half along the diagonal
Cut the 9 ¼” square in half along the diagonal and again in the opposite direction
2.
Take the 8 ½” square and the four triangles cut from fabric 4, using ¼” seam allowance, lay the longest edge of one of the triangles RST (right sides together) on one edge of the square. Sew and press seam open. Repeat on opposite side with another triangle. Press
seams open. Repeat process using the remaining two triangles.
Check your points, you need to have ¼” seam allowance
Take two triangles from the same fabric and sew RST using ¼” seam allowance to top left and bottom right of the new block, press seams towards outside edge.
Repeat with remaining two triangles to complete your block.
3.
Check your points again, block can be trimmed if needed to 16 ½” x 16 ½”
Block 1 is complete – Congratulation
Please share your gorgeous blocks on Instagram using the hashtag
#makotiquiltalong, I’m so excited to see your finished blocks.
Spread the word and get friends and family sewing along too…
You can find me on Instagram @michelle_creativeblonde and on Facebook
@creativeblonde66
4.