user’s guide - roadtrucker inc.€¦ · rand mcnally intelliroute® tndtm 500 user’s guide 2...
TRANSCRIPT
User’s Guide
Rand McNally IntelliRoute® TNDTM 500 User’s Guide ii
Trademarks
Rand McNally and IntelliRoute are registered trademarks and TND is a trademark of Rand McNally.
NAVTEQ ON BOARD is a trademark of NAVTEQ.
The Trucker’s Friend and National Truck Stop Directory are registered trademarks of TR Information Publishers.
Other products and companies mentioned herein may be trade-marks of their respective owners.
© 2009-2010 Rand McNally All rights reserved.
Rand McNally follows a continuous improvement process and reserves the right to provide enhancements that may not be reflected in the pictures and specifications in this manual.
The information contained herein may be changed at any time without prior notification. This manual nor any parts thereof may not be reproduced for any purpose whatsoever without the express written consent of Rand McNally, Inc, nor transmitted in any form either electronically or mechanically, including photocopying and recording. All technical specifications, drawings, etc. are subject to copyright law.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide iii
Table of Contents
Welcome
Your IntelliRoute® TND™ 500 ........................................ 1 About GPS ...................................................................... 2 Features .................. ....................................................... 3 Customer Support ................. ........................................ 5
Getting Started
What’s Included .............................................................. 7 Important Safety Information ......................................... 8 Navigation Safety ........................................................ 8 Installation Safety ........................................................ 9 Device Safety ............................................................ 10 Battery Power Indicator ................................................ 11 Charge the Battery ....................................................... 12 First Time Use ........................................................... 12 Charge with the Wall Charger .................................. 12 Charge with the USB Cable ....................................... 12 Charge with the Vehicle Charger ............................... 12 Install the Cradle and Mount ........................................ 13 Power the Device ......................................................... 14 Turn the Device On ................................................... 14 Turn the Device Off ................................................... 14 Enter or Return from Standby (Sleep) Mode .............. 14 Reset the Device ....................................................... 15
Basic Operations
Start the IntelliRoute® TND™ 500 ............................... 17 The Main Menu ........................................................... 18 Using Keyboards .......................................................... 19 Basic Settings ............................................................... 20 Select Driver Status ................................................... 20 Select a Keyboard Type ............................................. 20 Volume Settings ........................................................ 21 Set Truck Information ................................................ 21 Select Truck or Car Mode .......................................... 22 Set Truck Yard Time Zone ........................................... 22 Set the Type of Route to Calculate ............................ 23 Set Warnings ............................................................ 23
Destinations
Ways to Search for Locations ....................................... 25 Location Searches ........................................................ 26 Destination Selection Window .................................. 26 Destination Auto-Complete ...................................... 27 About City and Street Names .................................... 28 Select a City .............................................................. 29 Find Addresses ............................................................. 30 Location Selection Window ....................................... 30 Search for an Address ............................................... 31 Search Near a City Center ......................................... 32 Search For an Intersection ......................................... 33
Rand McNally IntelliRoute® TNDTM 500 User’s Guide iv
Point of Interest Searches ............................................. 34 Points of Interest Selection Window ........................... 34 Points of Interest Category Window .......................... 35 Types of Points of Interest (POIs) ................................... 36 Select a Truck-Related Point of Interest ...................... 37 Select and Filter Travel Center Amenities ................... 38 Select a Consumer Point of Interest ........................... 39 Find Points of Interest (POIs) ......................................... 40 Search Near the Current Truck Location .................... 40 Search In a City ......................................................... 41 Search Along the Route ............................................ 42 Search Near the Destination ...................................... 43 Search Near End of Day Location .............................. 44 Find a Location by Tapping on the Map ........................ 45 Tap on the Map and Avoid the Location .................... 45 Tap on the Map and Route to the Location ............... 46 Rate a Truck-Related Point of Interest ........................... 47 Manage Destinations ................................................... 48 Save a Location in the Address Book ......................... 48 Select a Location from the Address Book ................... 49 Create an Address Book Group ................................. 50 Select a Location From a Group ................................ 51 Select a Location from the History List ....................... 52
Multi-Stop Routes
Create a Multiple Stop Route ....................................... 53 Add Locations to a Multi-Stop Route ............................ 54 Manage Routes ............................................................ 55 Optimize a Route .......................................................55 Remove a Stop from a Route .................................... 56 Select and Run a Saved Route ................................... 57 Delete a Route .......................................................... 58
Maps
Destination Confirmation Windows ............................. 59 Address Confirmation Window ................................. 59 Consumer Point of Interest (POI) Confirmation Window .............................................. 60 Truck-Related Point of Interest (POI) Confirmation Window .............................................. 61 Address Book Confirmation Window ........................ 62 Multi-Point Route Confirmation Window .................. 63 Turn-by-Turn List .......................................................... 64 View the Turn-by-Turn List ........................................ 65 Route Map Window .................................................... 66 Detour Around Part of the Route ...............................67 Detour Around a Specific Roadway ........................... 68 Cancel a Route .............................................................69
Rand McNally IntelliRoute® TNDTM 500 User’s Guide v
Truck Tools
Truck Tools Window ..................................................... 71 Timers and Logs ........................................................... 72 View Timers and Odometer Readings ........................ 72 View Driver Logs ....................................................... 73 Calculate a Quick Route ............................................ 74 View Rand McNally Motor Carriers Road Atlas Emergency Information .................................... 75 Use the Calculator .................................................... 76 Use the Unit Converter ............................................. 77 Send a Message to Rand McNally ................................. 78 Send a Message on Your Current Location ................ 78 Send a Message on a Different Location ................... 79 Send a Message on a Location on the Map ............... 80
Customize
Truck Information ........................................................ 81 Set Truck Options ......................................................... 81 Device and Map Display Settings .................................. 82 Set Device and Map Display Options ............................ 83 Routing Settings .......................................................... 84 Set Routing Options ..................................................... 84 Warning Settings ......................................................... 85 Set Warning Options .................................................... 85
TND Dock
Install TND Dock Software ............................................ 87 Set Up to Use TND Dock .............................................. 88 Open the TND Dock Main Window .............................. 88 TND Dock Main Window ............................................. 89 IntelliRoute® TND™ 500 ............................................. 90 Check for IntelliRoute® TND™ 500 Software Updates ....................................................................... 90 View IntelliRoute® TND™ 500 Information .................. 91 Backup IntelliRoute® TND™ 500 Information .............. 92 Restore IntelliRoute® TND™ 500 Information .............. 93 View IntelliRoute® TND™ 500 Manual ........................ 94 Sign Up for Road Construction Updates ....................... 95 Tell Rand McNally ......................................................... 96 Go To Websites ............................................................ 97 Rand McNally Consumer .............................................. 97 Rand McNally Commercial Transportation .................... 97
Index
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 1
Welcome
3
4
6
9
1
2
Front
Back 7
8
5
Your IntelliRoute® TND™ 500
1 Power Key Turns the device On, Off, and used to enter/return from Standby mode.
2 Audio Output Socket Connect to external speaker (not provided).
3 Traffic Antenna Socket For future use.
4 SD Card Slot Stores map data (in some devices).
5 Battery Power Indicator Shows charging status.
6 Mini-USB Port Connects to a power source (computer, car charger, or wall charger). Also
used with the TND Dock application.
7 Speaker Issues spoken road instructions and maneuvers.
8 Reset Button Restores factory settings and restarts the device.Note: Use this button only
when instructed to do so by Rand McNally Customer Support Personnel.
9 External GPS port Used in cases where clear view of the sky is blocked by metal objects or
metalized windshields.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 2
About GPS
The Global Positioning System (GPS) is a constellation of satellites that a GPS receiver uses to calculate geographical positions. To determine a position, data from at least three satellites is required. To determine altitude, the data from 4 or more satellites is required. Accuracy of the positioning varies from 10 feet to several hundred feet, depending on vehicle placement and the surrounding environment
Geographical terrain (such as mountains), man-made structures (such as highway overpasses, bridges and tall buildings), as well as weather can interfere with the GPS signal. For best GPS reception, position the IntelliRoute® TND™ 500 and mount with a clear line of sight to the sky.
Some vehicles may have a limited view of the sky due to metal sun shields, or a metallized windshield coating. If your unit does not appear to receive signals well inside your vehicle but works well outside, contact Rand McNally for an available external antennae.
Map data used by the IntelliRoute® TND™ 500 includes the geographical coordinates for address locations and Points Of Interest (POIs). With GPS reception, your device calculates a route to your selected location.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 3
Features
Truck-Specific Routing The IntelliRoute® TND™ 500 uses Rand McNally proprietary road information to calculate the best route to your destination. Enter your truck information, such as length, width, weight, height and the IntelliRoute® TND™ 500 calcu- lates a route that meets your needs. You can calculate routes for either the shortest amount of time or the shortest distance. With additional routing settings, you can specify the type of roadways (tollroads, ferries, etc) to allow in the route or to avoid.
For more information, see: • “Set Truck Information” on page21. • “Set the Type of Route to Calculate” on page23. • “Routing Settings” on page84.
Enhanced Spoken DirectionsThe IntelliRoute® TND™ 500 includes turn-by-turn directions with spoken street names. You can also repeat an instruction by tapping a button.For more information, see:
• “View the Turn-by-Turn List” on page65.
Road Construction UpdatesWith TND Dock, you can register to automatically receive regular updates on highway construction across the US and Canada. Once installed, you receive updates whenever you log onto TND Dock and connect to Rand McNally. For more information, see:
• “Install TND Dock Software” on page87. • “Sign Up for Road Construction Updates” on page95.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 4
Timers and LogsRecord and monitor driving time and On/Off Duty time. Track odometer read- ings to better manage scheduled maintenance
For more information, see: • “Select Driver Status” on page20. • “Timers and Logs” on page72.
Points of Interest (POIs)IntelliRoute® TND™ 500 offers thousands of Trucker’s Friend National Truck Stop Directory® Points of Interest, with dozens of amenity types including truck stops, rest areas, and weigh stations. Also included are 6 million Rand McNally and ‘yellow pages’ Consumer points of interest.
For more information, see: • “Types of Points of Interest (POIs)” on page36.
TND DockRand McNally TND Dock, a PC application, lets you to update your device soft- ware electronically, receive free road construction updates, view the IntelliR- oute® TND™ 500 User’s Guide, along with other useful functions.
For more information, see: • “TND Dock” on page87.
Amenity Ratings & ReviewsRead amenity reviews of Truck-related Points of Interest from fellow truckers and record your own rating.
For more information, see: • “Rate a Truck-Related Point of Interest” on page47.
Vehicle Mode FlexibilityThe IntelliRoute® TND™ 500 vehicle mode can be set to truck or car. When set to Truck, routes are calculated according to the specific truck needs.
• “Select Truck or Car Mode” on page22.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 5
Customer SupportCall Toll Free: 877-IGO4TND (Toll Free) 877-446-4863
Service Hours: Monday through Friday, 8 a.m. to 7 p.m. CT (except official holidays)
E-Mail: [email protected]
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 7
Getting Started
What’s Included
Your IntelliRoute® TND™ 500 includes: • IntelliRoute® TND™ 500 navigation device • Mount and Cradle • 12V Truck Charger with extended length cable • Home Charger (120/240V) • USB cable • Extra Fuse • Quick Start Guide
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 8
Important Safety Information
Navigation SafetyCaution: Use this navigation device at your own risk.
Caution: Use this navigation device only when it is safe to do so.
Caution: Look at the display only when it is safe to do so.
Caution: Traffic regulations always have priority over any instructions from the navigation system.
Caution: Follow navigation system instructions only when local regulations and road traffic allow you do so.
Caution: Make sure that the mount is securely mounted and properly adjusted before each trip.
Note: If you do not understand the spoken instructions, or are unsure of what to do next, refer to the Navigation map on your navigation device.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 9
Installation Safety
Caution: Make sure that the mount does not impair the driver’s driver’s visibility.
Caution: Do not attach the mount within the airbag deployment zone.
Caution: When installing the mount, make sure that it does not pose a risk in the event of an accident.
Caution: Do not run cables directly next to safety-relevant devices and power supplies.
Caution: After installation, check all safety-relevant equipment in the car.
Caution: Connect the wall charger to a 120V or 240V outlet only.
Caution: Connect the vehicle charger to a 12V outlet only.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 10
Device Safety
Caution: Do not use sharp-edged objects on the device touch screen.
Caution: Protect the device from moisture. The device is not waterproof and is not protected against water damage.
Caution: Protect the device from extreme temperatures. Operating temperature for the device is between 32 degrees F to 120 degrees F.
Caution: When parking the vehicle for an extended time, to avoid battery drain, hold down the power button for 10 seconds to power off the device. For shorter periods of inactivity, see “Enter or Return from Standby (Sleep) Mode” on page14.
Caution: Do not open the navigation device casing.
Caution: Do not attempt to replace the battery. For problems with the battery, contact Rand McNally Customer Support.
Caution: Always follow local regulations when disposing of this device.
Caution: Do not expose the navigation device to extreme heat or cold. Damage to the device may impair its function.
Note: Make sure that there are no kinks in the cable and that it will not be damaged by any sharp objects.
Note: Use only a moist cloth to clean the navigation device.
Note: Do not pull the cable to unplug the unit.
Battery Power Indicator
The Indicator displays the status of the built-in battery:
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 11
Battery Power Indicator
Bright Red Device is plugged in and the battery is charging.
Bright Green Device is plugged in and the battery is fully charged.
Light Green Device is in Standby Mode.
Charge the Battery
First Time Use
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 12
To maximize battery life, plug in the IntelliRoute® TND™ 500 for the first two (2) hours of use. Use the: • Home charger to power the device from wall outlet, or • 12V vehicle charger to power the device from the battery, or • USB cable to power the device from a computer.
Charge with the Wall Charger1. Plug the mini-USB socket into the port on the side of the device. 2. Plug the wall charger into a wall socket.
Charge with the USB Cable1. Plug the mini-USB socket into the port on the side of the device. 2. Plug the USB socket into a USB port on your computer. On some computers, the computer may need be on to charge the device.
Charge with the Vehicle Charger1. Plug the mini-USB socket into the port on the side of the device. 2. Plug the vehicle charger into the vehicle power outlet or cigarette lighter. The vehicle may need to be on for the device to charge.
Install the Cradle and Mount
Select an area with a line of sight to the sky and GPS satellites to ensure reliable GPS information.
Charge with the Wall Charger
Charge with the USB Cable
Charge with the Vehicle Charger
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 13
Note: Obey all local regulations governing the placement of the mount.
Note: Do not place the mount in an airbag deployment area.
1 Clean and dry the mounting area.
2 Remove the suction cup protective film.
3 Adjust the angle and secure the cradle to the mount using the thumbscrew.
4 Pull the suction cup lever up to release suction.
5 Place and hold the mount suction cup against the mounting surface.
6 Press the suction cup lever down until it snaps into place.
7 Angle the bottom of the device into the cradle and align the two slots on the bottom of the device into the two projections on the cradle.
8 Press the top of the device towards the cradle until you hear two clicks indicating the device is fully secured.
9 Plug the power cord into the device and the vehicle’s 12 volt power source.
10 Adjust the navigation device so that it can be easily seen and does not block the driver’s line of sight.
Power the Device
Note: To maximize battery life, plug in the IntelliRoute® TND™ 500 for the first two (2) hours of use. See “First Time Use” on page12.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 14
Power Key Turn the Device On • Press and hold the Power Key for two (2) seconds, then release.
(After 5-10 seconds, the Rand McNally splash screen displays as the device powers on.)
Turn the Device Off • Press and hold the Power Key for five (5) seconds, then release.
A message displays indicating that the device is powering off.
Enter or Return from Standby (Sleep) Mode • Press and release the Power key.
Reset the Device
Resetting the device restores factory settings and restarts the device.
When you reset the device, your current route information is lost. Address Book entries, trips, settings, ratings and messages to Rand McNally are not affected.
Note: Use this procedure only when instructed to do so by Rand McNally Customer Support Personnel.
• Use a paper clip to press the reset button located on the back of the device case
Reset Button
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 16
Install TND Dock Window
Warning and User Consent Window
Main Menu
Basic Operations
Start the IntelliRoute® TND™ 500
1 Press and hold the device Power Key for two (2) seconds.
(Device powers on in 5 seconds.)
2 On first use and occasionally on subsequent use, the Install TND Dock Window displays.
(Once TND Dock is installed, this window no longer displays.)
3 To install the TND Dock, tap Yes. See “Install TND Dock Software” on page 89 for more information.
4 To start the IntelliRoute® TND™ 500 without installing TND Dock, tap No.
The Warning and User Consent Window displays.
5 Tap Accept.
The Main Menu displays.
To view a short tutorial on device use, tap Tutorial.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 17
The Main Menu
Car Mode 1 Status Icons
Icons shown in this area indicate device status.
Displays when GPS connection is lost.
When on battery power, displays battery level.
2 Driver Status Select driver status. Note: Not available in Car mode. See “Select Truck or Car Mode” on page22.
3 Truck Tools Select to enter truck information, access other tools (such as the Unit Converter, Calculator), or to set warnings. Note: Not available in Car mode. See “Select Truck or Car Mode” on page22.
4 Go To Map Tap to view location on the map.
5 Choose Destination Tap to select an address or Point of Interest (POI).
6 Preferences Tap to set device or routing options.
7 Mute/Unmute the Volume Tap to mute or unmute spoken instructions.
8 Set Volume Louder or Softer Tap to increase or decrease spoken instructions volume.
Truck Mode
3
1 2
5
6 7 8
4
Car Mode1
5
6 7 8
4
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 18
Using Keyboard
Software keyboards are used when entering text.
Special Keys
Return to previous window.
View a list of valid options.
Delete last character and move back one space.
Add a space.
ABC Keyboard
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 19
Keyboard Setting
Basic Settings
Select Driver StatusNote: Only available when in Truck mode. See “Select Truck or Car Mode” on page 22
When set to truck, a simplified set of menus display and routing is calculated for cars. When set to Truck, routing is calculated for the specified truck and load. (See “Set Truck Information” on page 21). Also, when set to Truck, the driver status setting controls how timers are calculated.
From the Main Menu:
• Tap on the driver status.
Select a Keyboard Type
For more information, see “Using Keyboards” on page 19.
From the Main Menu:
1 Tap Truck Tools > Preferences.
2 Tap on the Device tab.
3 Tap and to view the options.
4 Tap on the Keyboard option and select the keyboard type.
5 Tap Back to save changes.
Driver StatusDriver Status Field
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 20
Volume Settings
Set the volume for spoken navigation instructions. You can select an option to increase the volume automatically as the vehicle speed increases. See “Device and Map Display Settings” on page 84.
Increase Volume
• Tap
Decrease Volume
• Tap
Mute/UnMute
• Tap
Set Truck Information
Note: Only available when in Truck mode. See “Select Truck or Car Mode” on page 22
The IntelliRoute® TND™ 500 uses truck information to calculate a route for your specific type of truck and load.
For more truck information options, see “Truck Information” on page 83.
From the Main Menu:
1 Tap Truck Tools > Truck Info.
2 Tap and to view the options
3 Tap the option to be set.
4 Enter the new information.
5 Tap Back to save changes.
Mute Softer Louder
Volume Controls
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 21
Select Truck or Car Mode
Select the type of vehicle. The IntelliRoute® TND™ 500 calculates routes based on this type of vehicle. When Car is selected, some truck-related features will not be available.
From the Main Menu:
1 Tap Truck Tools > Preferences.
2 Tap on the Device tab.
3 Tap and to view the options.
4 Tap on the Mode option and select Truck or Car.
5 Tap Back to save changes.
Set Truck Yard Time Zone
Select the time zone of the truck yard. With GPS reception, the IntelliRoute® TND™ 500 displays times for your current location and your destination.
From the Main Menu:
1 Tap Preferences.
2 Tap on the Device tab.
3 Tap and to view the options.
4 Tap on the Yard Time Zone option and select the time zone.
5 Tap Back to save changes.
Mode Setting
Truck Yard Time Zone
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 22
Set the Type of Route to Calculate
Set the IntelliRoute® TND™ 500 to calculate the fastest route to a location.
For more routing options, see “Routing Settings” on page 86
From the Main Menu:
1 Tap Preferences.
2 Tap on the Routing tab.
3 Tap and to view the options.
4 Tap on the Routing option and select the route type.
5 Tap Back to save changes.
Set Warnings
For more on warning options, see “Warning Settings” on page 87.
Note: Only available when in Truck mode See “Select Truck or Car Mode” on page 22.
From the Main Menu:
1 Tap Truck Tools > Warnings.
2 Tap and to view the options.
3 Tap the warning to be set.
4 Tap and to specify the number of miles.
5 Tap Back to save changes.
Set Route Type
Weigh Station Warning
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 24
Destinations
Ways to Search for Locations
Find AddressesTo find an address, you can:
• “Search for an Address” on page 31
• “Search Near a City Center” on page 32
• “Search Near an Intersection” on page 33
Find Points of Interest (POIs)You can find Points of Interest (POIs) by:
• “Search Near the Current Truck Location” on page 40
• “Search In a City” on page 41
• “Search Along the Route” on page 42
• “Search Near the Destination” on page 43
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 25
Location Searches
Destination Selection WindowTo access this window from the Main Menu, tap Choose Destination.
1 Back Tap to return to the Main Menu.
2 New Location Tap to find a new address.
3 History Tap to view a list of previous locations.
4 Address Book Tap to view a list of saved locations.
5 Multi-Stop Trips Tap to view a list of saved multi-stop routes or to create a new one.
6 Points of Interest (POIs) Tap to search for a point of interest (POI) such as, a gas station, restaurant,
etc.
7 Set as Home Set a location as Home to quickly calculate routes to or from the location.
Once Home has been set, this button will change to Take Me Home. To reset to a new Home, simply delete the “Home” entry from your Address Book.
Note: Only available in Car mode. See “Select Truck or Car Mode” on page 21.
Truck Mode
3
1
2
5 6
4
Car Mode
3
1
2
56 7
4
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 26
Destination Auto-Complete
Enter the first few characters in a name and a short list displays a couple of names that start with the typed characters.
On the keyboard, the only keys available are for the next valid characters in a search name.
Continue entering characters until the searched for name displays in the list. Tap on the name to select it.
Other buttons on this window include:
Tap to return to the previous window.
Tap to view a longer list of names matching the typed characters.
Tap to enter a space.
Tap to delete the last character and move the cursor back one space.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 27
About City and Street Names
Some cities with common names, such as “Concord” have several types of names associated with a city.
If a name does not display, continue typing characters until the name you are looking for displays in the list.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 28
Select a City
First UseOn first use, the Select City Name Window displays. On the keyboard, type the first few characters in the city name.
On the next use, the city name selected in the previous search displays. Tap on the city name to search for a location in the city. To find locations in a different city, type the first few characters in the new city name.
Short City ListAs you type the characters in the city name, a short list of matching city names displays. Tap on a city to select it.
Long City ListIf the city is not displayed on the short name list, continue typing characters in the city name or tap ENTER to display a long list of city names. Use the up and down arrows to view all cities/states. Tap on a city to select it.
Address ListThe City/State List displays cities of the selected name in different states. Use the up and down arrows to find the correct city/state. Tap on the city/state name to select it.
Special note: If a city name appears twice within a state, you may need to check both for your specific address.
First Use
Short City List
Long City List
Address List
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 29
Find Addresses
Location Selection WindowFrom the Main Menu:
• Tap Choose Destination > New Location.
1 Address Tap to search for an address by entering the city, street and number.
2 City Center Tap to search for an address in a city.
3 Intersection Tap to search for an address by entering the city and two intersecting roads.
4 Back Tap to return to the Destination Selection Window.
5 Menu Tap to return to the Main Menu.
31 2
54
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 30
Search for an AddressFrom the Main Menu:
1 Tap Choose Destination > New Location > Address.
2 Type the first few characters in the city name and tap Enter.
The Select City List displays.
3 Tap on the city/state from the displayed list.
4 Type the first few characters in the street name and tap Enter.
The Select Street List displays.
5 Tap on the street name from the displayed list.
6 Tap Enter to show a list of street numbers. The Select Address Range List displays.
7 Tap on the street number range from the list. The Confirmation Window displays:
8 Tap Begin Route to navigate to the location. See “Destination Confirmation Windows” on page 61 for more options.
Select City List
Select Street List
Select Address Range List
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 31
Search Near a City CenterFrom the Main Menu:
1 Tap Choose Destination > New Location > City Center.
2 Type the first few characters in the city name and tap Enter.
The Select Address List displays.
3 Tap on the city/state name. The Confirmation Window displays.
4 Tap Begin Route to navigate to the location. See “Destination Confirmation Windows” on page 61 for more options
Select Address List
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 32
Search For an IntersectionFrom the Main Menu:
1 Tap Choose Destination > New Location > Intersection.
2 Type the first few characters in the city name and tap Enter. The Select Address List displays.
3 Tap on the city/state name from the displayed list. The Enter Primary Street Window displays.
4 Type the first few characters in the primary street name and tap Enter. The Select Intersecting Street List shows streets that intersect with the primary street.
5 Tap on the intersecting street name. The Confirmation Window displays:
6 Tap Begin Route to navigate to the location. See “Destination Confirmation Windows” on page 61 for more options.
Select Address List
Select Street List
Select Intersecting Street List
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 33
Point of Interest Searches
Points of Interest Selection Window1 My Truck
Tap to search for a point of interest near the current truck location.
2 City Tap to search for a point of interest in a city.
3 My Route Tap to search for a point of interest along the truck’s route.
4 End of Day Tap to search for a point of interest near your end of day location.
This search is based on your remaining Driving Hours. (See “View Timers and Odometer Readings” on page72.) The search along your route is based on your estimated end of day location. The search includes the last 30 minutes of your trip.
5 Destination Tap to find a point of interest near the route destination.
6 Back Tap to return to the Destination Selection Window.
7 Menu Tap to return to the Main Menu.
3
1 2
5
6 7
4
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 34
Points of Interest Category Window1 Travel Center
Tap to search for a point of interest near the current truck location.
2 Parking & Rest Area Tap to search for a point of interest in a city.
3 Weigh Station Tap to search for a point of interest along the truck’s route.
4 CAT Scale Tap to search for a point of interest near your end of day location.
5 Truck Dealer Tap to find a point of interest near the route destination.
6 More Tap to select a non-truck related point of interest.
7 Back Return to previous window.
8 Menu Tap to return to the Main Menu.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 35
Types of Points of Interest (POIs)
The IntelliRoute® TND™ 500 offer thousands of Points of Interest. Truck-related POIs include Truckers Friend and Rand McNally locations that offer many amenities to address trucking professional needs. Consumer POIs are also available.
On the Points of Interest Category Window, available POIs are:
Travel CenterAmenities include: Fueling stations, Food stores, Restaurants, Showers, etc.
See “Select and Filter Travel Center Amenities” on page 38.
Parking and Rest Area
Weigh Station
CAT Scale
Truck Dealer
See “Select a Truck-Related Point of Interest” on page 37.
Consumer Points of Interest See “Select a Consumer Point of Interest” on page 39.
Truck-Related POIs
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 36
Select a Truck-Related Point of Interest1 Perform a Point of Interest search.
On the POI Category Window:
2 Tap: • Parking & Rest Area, or • Weigh Station, or • CAT Scale, or • Truck Dealer
Note: To select a Travel Center see “Select and Filter Travel Center Amenities” on page 38.
Note: To select a consumer POI see “Select a Consumer Point of Interest” on page 39.
The Select <Type of POI> Window displays POI locations.
3 Tap on a location from the list.
POI Category Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 37
Select and Filter Travel Center AmenitiesTruck-related Travel Center Points of Interest can include over 70 different types of amenities. To select only amenities that you are interested in, filter your search results.
1 Perform a Point of Interest search.
On the POI Category Window:
2 Tap Travel Center. The Select Travel Center Window displays all travel centers in your area.
3 Tap Select Amenities. The Select Amenities Window displays.
4 Click on the checkbox of each amenity to be included in the search.
5 Tap OK. The Select Travel Center Window re-displays.
6 Click on the Filter checkbox. The Select Travel Center Window displays POI locations with your selected amenities.
7 Tap on a location from the list.
Select Travel Center WIndow
POI Category Window
Select Amenities Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 38
Select a Consumer Point of Interest1 Perform a Point of Interest search.
On the POI Category Window:
2 Tap More. The Select Category Window displays.
3 Tap on a category. (For example, tap Restaurant.)
4 If necessary, tap on a subcategory type.(For example, tap Bistro.) The Select Point of Interest Window displays POI locations.
5 Tap on a location from the list.
6 In order to search for a point of interest by name, select the appropriate category and (if applicable) sub category. Tap the Spell button to bring up a keyboard.
7 Enter characters until the searched for name displays in the list.
8 Tap on the name to select it.
Select Category Window
POI Category Window
Select Subcategory Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 39
Find Points of Interest (POIs)
Search Near the Current Truck LocationFrom the Main Menu:
1 Tap Choose Destination > Points of Interest > My Truck. The POI Category Window displays.
2 Tap:
• Travel Center and filter for amenities. (See “Select and Filter Travel Center Amenities” on page 38.)
• Parking & Rest Area, Weigh Station, CAT Scale, or Truck Dealers.
• More and see “Select a Consumer Point of Interest” on page 38.
3 Tap on a location on the list. The Confirmation Window displays:
4 Tap Begin Route to navigate to the location. See “Destination Confirmation Windows” on page 61 for more options.
POI Category Window
Select <Point of Interest Type> > Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 40
Search In a CityFrom the Main Menu:
1 Tap Choose Destination > Points of Interest > City.
2 Type the first few characters in the city name and tap Enter. The Select Address List displays.
3 Tap on the city/state from the displayed list. The POI Category Window displays.
4 Tap:
• Travel Center and filter for amenities. (See “Select and Filter Travel Center Amenities” on page 38.)
• Parking & Rest Area, Weigh Station, CAT Scale, or Truck Dealers.
• More and see “Select a Consumer Point of Interest” on page 38. The Select (Point of Interest Type) displays POI locations.
5 Tap on a location on the list. Note: If no locations are found, a message displays. The Confirmation Window displays:
6 Tap Begin Route to navigate to the location. See “Destination Confirmation Windows” on page 61 for more options.
POI Category Window
Select <POI Type> Window
Select Address List
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 41
Search Along the Route1 Create a route or load a trip.
From the Main Menu:
2 Tap Choose Destination > Points of Interest > My Route. The POI Category Window displays.
3 Tap:
• Travel Center and filter for amenities. (See “Select and Filter Travel Center Amenities” on page 38.)
• Parking & Rest Area, Weigh Station, CAT Scale, or Truck Dealers.
• More. (See “Select a Consumer Point of Interest” on page 38.) The Select (Point of Interest Type) displays POI locations.
4 Tap on a location on the list. Note: If no locations are found, a message displays. The Confirmation Window displays:
5 Tap Begin Route to navigate to the location. See “Destination Confirmation Windows” on page 61 for more options.
POI Category Window
Select <POI Type> Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 42
Search Near the Destination1 Create a route or load a trip.
From the Main Menu:
2 Tap Choose Destination > Points of Interest > Destination. The POI Category Window displays.
3 Tap:
• Travel Center and filter for amenities. (See “Select and Filter Travel Center Amenities” on page 37.)
• Parking & Rest Area, Weigh Station, CAT Scale, or Truck Dealers.
• More and see “Select a Consumer Point of Interest” on page 38. The Select (Point of Interest Type) displays POI locations.
4 Tap on a location on the list. Note: If no locations are found, a message displays. The Confirmation Window displays:
5 Tap Begin Route to navigate to the location. See “Destination Confirmation Windows” on page 61 for more options.
POI Category Window
Select <POI Type> Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 43
Search Near End of Day Location1 Create a route or load a trip.
From the Main Menu:
2 Tap Choose Destination > Points of Interest > End of Day. The POI Category Window displays.
3 Tap:
• Travel Center and filter for amenities. (See “Select and Filter Travel Center Amenities” on page 38.)
• Parking & Rest Area, Weigh Station, CAT Scale, or Truck Dealers.
• More and see “Select a Consumer Point of Interest” on page 38. The Select (Point of Interest Type) displays POI locations.
4 Tap on a location on the list. Note: If no locations are found, a message displays. The Confirmation Window displays:
5 Tap Begin Route to navigate to the location. See “Destination Confirmation Windows” on page 61 for more options.
POI Category Window
Select <Point of Interest Type> Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 44
Find a Location by Tapping on the Map
Tap on the Map and Avoid the Location1 With a map displayed:
The crosshairs ()(crosshairs.bmp) display over your current location.
2 Touch and drag the map until the crosshairs are centered over the location. The Tap on Map Location Window displays.
3 You may select “Route to Here”, or “Avoid”. If you select Avoid, this segment is blocked permanently, until you select it again, and choose “Remove Avoid”.
4 Tap Back to save changes. The Confirmation Window displays.
See “Route Map Window” on page 68 for more options.
Tap Map Location Window
Map Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 45
Tap on the Map and Route to the Location3 With a map displayed:
The crosshairs display over your current location.
3 Touch and drag the map until the crosshairs are centered over the location. The Tap on Map Location Window displays.
3 Tap Route to Here.
3 Tap Back to save changes. The Confirmation Window displays.
3 Tap Begin Route to navigate to the location. See “Destination Confirmation Windows” on page 61 for more options.
Tap Map Location Window
Map Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 46
Rate a Truck-Related Point of Interest
1 Search for and select a Truck-related Point of Interest. (See “Select a Truck-Related Point of Interest” on page 37.
The Confirmation Window displays.
On the Rating button, the top row indicates the community rating from fellow drivers for the Point of Interest. The bottom row indicates your individual rating.
2 Tap on the Ratings button. The Ratings Window displays the Personal Rating tab.
3 Use and to rate the facility.
4 Tap Create Comment to enter a personal comment on the facility. Then tap Enter to save the comment. The Ratings Window re-displays.
5 Tap Back to save changes. The Confirmation Window displays. Your rating displays on the button.
Note: To share ratings with fellow drivers, you must install the TND Dock software. See “Install TND Dock Software” on page 87.
Ratings Window
Create Note Window
Confirmation Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 47
Manage Destinations
Set a Location as HomeNote: Only available when in Car mode.
From the Main Menu:
1 Tap Choose Destination > Set as Home.
Note: This will set your current location as home.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 48
Save a Location in the Address Book
1 Search for a Destination.
On the Confirmation Window:
2 Tap Save. The Entry Name Window displays.
3 Type a the name of the location.
4 Tap Enter to save the location in the Address Book. The Confirmation Window re-displays.
5 Tap Begin Route to navigate to the location. See “Destination Confirmation Windows” on page 61 for more options.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 49
Select a Location from the Address BookFrom the Main Menu:
1 Tap Choose Destination > Address Book.
2 Tap on the All Addresses tab. The Address List displays.
3 Tap on an address to select it. The Confirmation Window displays.
4 Tap Begin Route to navigate to the location. See “Destination Confirmation Windows” on page 61 for more options.
Address List
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 50
Create an Address Book GroupYou must create the group first, before you can add addresses to it.
From the Main Menu:
1 Tap Choose Destination > Address Book. The Address Book Window displays.
2 Tap on the Groups tab.
3 Tap New Group. The Enter Name Window displays.
4 Type the group name.
5 To select a different color folder, tap . The Choose Folder Color Window displays.
6 Tap on a color, then tap Close.
7 When finished, tap Enter. The Groups tab re-displays. The new group name is shown.
Enter Named Window
Choose Folder Color Window
Address Book Group Tab
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 51
Select a Location From a GroupFrom the Main Menu:
1 Tap Choose Destination > Address Book.
2 Tap on the Groups tab. The Groups List displays.
3 Tap on the location. The Confirmation Window displays.
4 Tap Begin Route to navigate to the location. See “Destination Confirmation Windows” on page 61 for more options.
Group Address Window
Groups List
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 52
Select a Location from the History ListFrom the Main Menu:
1 Tap Choose Destination > History. The Destination History List displays.
2 Tap on the destination to select it. The Confirmation Window displays.
3 Tap Begin Route to navigate to the location. See “Destination Confirmation Windows” on page 61 for more options.
Destination History List
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 53
This page intentionally left blank
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 54
Multi-Stop Routes
Create a Multiple Stop Route
From the Main Menu:
1 Tap Choose Destination > Multi-Stop Trips. The Multi-Stop Trips Window displays.
2 Tap New Trip. The Enter Name Window displays.
3 Type the trip name.
4 To select a different color folder, tap . The Choose Folder Color Window displays.
5 Tap on a color, then tap Close.
6 When finished, tap Enter. The Multi-Stop Trips Window re-displays. The new trip name is shown.
Enter Name Window
Choose Folder Color Window
Multi-Stop Trips Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 55
Add Locations to a Multi-Stop Route
Note: Add locations in the order you want to route to them.
From the Main Menu:
1 Tap Choose Destination > Multi-Stop Trips. The Multi-Stop Trips Window displays.
2 Tap on the route. The Route Stop Window displays.
3 Tap Add Address. The Add Destination Window displays.
4 To add an address, tap:
• Enter New Address and search for an address. (See page 31.)
• History and select a History List location. (See page 52.)
• Saved and select an Address Book location. (See page 49.)
• POI and select a Point of Interest. (See page 34.)
The Confirmation Window displays for the location.
5 Tap Add to Multi-Point. The Route Stop Window re-displays. The location has been added to the end of the route.
Add Destination Window
Confirmation Window
Route Stop Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 56
Manage Routes
After all locations have been added to a multi stop route, you can run the optimizer wizard to organize your trip.
1 Select a 1st stop from your address list. If there is no preference, tap No Preference to allow the wizard to calculate using your current location.
(continued on the following page)
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 57
(continued from the previous page)
2 Select Last Stop from your address list. If there is no preference, tap No Preference.
3 Decide whether you want to return to your current location.
Note: If you want to include your current location as a starting location, you can enter it in the list.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 58
Remove a Stop from a RouteFrom the Main Menu:
1 Tap Choose Destination > Multi-Stop Trips. The Multi-Stop Trips Window displays.
2 Tap on the route. The Route Stop Window displays.
3 Tap on the next to the stop to be removed. A confirmation window displays.
4 Tap Yes. The Route Stop Window re-displays with the stop removed.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 59
Select and Run a Saved RouteFrom the Main Menu:
1 Tap Choose Destination > Multi-Stop Trips. The Multi-Stop Route List displays.
2 Tap on the route to select it. The Route Stop Window displays.
3 Tap on a stop to run the route. The Confirmation Window displays.
4 Tap Begin Route to navigate to the location. See “Destination Confirmation Windows” on page 61 for more options.
5 When you hit Start Trip, it plans the actual route to your first stop. When you have reached that stop, or at any other time, select the 2nd stop in the list to determine an actual route there.
Route Stop Window
Multi-Stop Route List
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 60
Delete a RouteFrom the Main Menu:
1 Tap Choose Destination > Multi-Stop Trips. The Multi-Stop Trips Window displays.
2 Tap on the (Button_DeleteStop.bmp) next to the route to be deleted. The Multi-Stop Trips Window re-displays. The selected route has been removed.
Multi-Stop Route List
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 61
Maps
Destination Confirmation Windows
Button options on the Confirmation Window change, based on the type of location selected.
Address Confirmation Window1 Destination address
The selected location address.
2 Begin Route Tap to begin routing to destination.
3 Route Via Add this location as an interim stop between the origin and destination.
4 Save Add the location to the Address Book. See “Save a Location in the Address
Book” on page 49.
5 Motor Carriers’ Road Atlas Cross reference to printed Rand McNally Motor Carriers Road Atlas. “P”
refers to the Road Atlas page number, and the numbers after that refer to the grid location.
6 Go to Map Tap to view this location on a map.
7 Back Return to previous window.
8 Menu Tap to return to the Main Menu.
Address Confirmation Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 62
Consumer Point of Interest (POI) Confirmation WindowButton options always available on this window are:
1 Destination address The selected location address.
2 Begin Route Tap to begin routing to destination.
3 Add to Multi-Point Add this location as an interim stop between the origin and destination.
4 Save Add the location to the Address Book. See “Save a Location in the Address
Book” on page 49.
5 MCRA: Cross reference to printed Rand McNally Motor Carriers Road Atlas.
6 Go to Map Tap to view this location on a map.
7 Back Return to previous window.
8 Menu Tap to return to the Main Menu.
Consumer Point of Interest (POI) Confirmation Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 63
Truck-Related Point of Interest (POI) Confirmation Window1 Destination address
The selected location address.
2 Begin Route Tap to begin routing to destination.
3 Services Tap to view Trucker amenities at this location.
4 Ratings Tap to rate amenities at this location.
5 Add to Multi-Point Add this location as an interim stop between the origin and destination.
6 Save Add the location to the Address Book. See “Save a Location in the Address
Book” on page 49.
7 MCRA: Cross reference to printed Rand McNally Motor Carriers Road Atlas.
8 Go to Map Tap to view this location on a map.
9 Back Return to previous window.
10 Menu Tap to return to the Main Menu.
Truck-Related Point of Interest (POI) ConfirmationWindow
3
1 2
5 67 8
9 10
4
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 64
Address Book Confirmation Window1 Destination address
The selected location address.
2 Begin Route Tap to begin routing to destination.
3 Edit Entry Tap to edit the location address book entry.
4 Create Note Tap to create a note about the location.
5 Add to Multi-Point Add this location as an interim stop between the origin and destination.
6 Add to Group Add this location to an Address Book group.
7 MCRA: Cross reference to printed Rand McNally Motor Carriers Road Atlas.
8 Go to Map Tap to view this location on a map.
9 Back Return to previous window.
10 Menu Tap to return to the Main Menu.
Address Book Confirmation Window
3
1 2
5 67 8
9 10
4
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 65
Multi-Point Route Confirmation Window1 Destination address
The selected location address.
2 Begin Route Tap to begin routing to destination.
3 Services Tap to view Trucker amenities at this location.
4 Ratings Tap to rate amenities at this location.
5 Add to Multi-Point Add this location to a multi-point route.
6 Save Add the location to the Address Book. See “Save a Location in the Address
Book” on page 49.
7 MCRA: Cross reference to printed Rand McNally Motor Carriers Road Atlas.
8 Go to Map Tap to view this location on a map.
9 Back Return to previous window.
10 Menu Tap to return to the Main Menu.
Multi-Point Route ConfirmationWindow
3
1 2
5 67 8
9 10
4
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 66
Turn-by-Turn List
1 altitude Altitude of current vehicle location.
2 MPH Current speed.
3 rise/set Times of sunrise and sunset.
4 odom1,odom 2 Odometer readings
5 Distance Distance to and type of next maneuver.
6 Street name The street you will be on after performing the next maneuver.
7 Up/Down Scroll up and down to view the list of maneuvers.
Turn-by-Turn List Window
31 2
56
7
4
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 67
View the Turn-by-Turn ListWhile navigating a route:
1 Tap to display the turn-by-turn list.
2 Use and to view the instructions.
3 To hide the turn-by-turn list tap again.
Turn-by-Turn Window
Route Map Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 68
Route Map Window
1 Next Maneuver Tap to repeat spoken next maneuver instructions
2 Road Name The name of street you will turn onto next.
3 Miles/Time Tap to select current speed, destination arrival tIme, or time remaining to
the destination.
4 Turn-by-Turn slideout Tap to view the turn-by-turn list.
5 Zoom in/zoom out. Tap to zoom in and show greater detail on a smaller map or tap to zoom
out to show less detail on a larger map.
6 Main Menu Tap to return to Main Menu.
7 Map Display Tap to change the map display. An icon on the upper right corner of the
button displays the selected option. These are: North at the top of the map (an N displays), direction of travel at the top of the map (and arrow displays), or display the map in 3D view (a 3 displays).
8 Road Name Tap to view the current road name, upcoming cross road name, city name,
and state.
9 Options Tap to see current location information, change route settings, or detour.
Route Map Window
31 2
5
6789
4
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 69
Detour Around Part of the RouteUse this procedure to recalculate a route to avoid the next several miles on the route.
While navigating a route:
1 Tap . The Location Route Options Window displays.
2 Tap Detour. The Detour Window displays.
3 On the left side of the window, tap the number of miles on the route to be avoided.
A new route is calculated and the Route Map Window re-displays.
Location Route Options Window
Detour Window
Route Map Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 70
Detour Around a Specific RoadwayUse this procedure to recalculate a route to avoid, if possible, a specific roadway.
While navigating a route:
1 Tap . The Location Route Options Window displays.
2 Tap Detour. The Detour Window displays.
3 On the right side of the window, tap and to view a list of roads in the current route.
4 Tap on one or more roadways to be avoided. A yellow checkmark appears in front of each selected road.
5 Tap Detour to recalculate the route. A new route is calculated and the Route Map Window re-displays.
Location Route Options Window
Detour Window
Route Map Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 71
Cancel a Route
While navigating a route:
1 Tap . The Location Route Options Window displays.
2 Tap Cancel Route. The route is cancelled and the Route Map Window displays your current location.
Location Route Options Window
Location Route Options Window
Route Map Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 72
This page intentionally left blank
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 73
Truck Tools
Note: Truck Tools are not available when in Car mode. See “Select Truck or Car Mode” on page 22.
Truck Tools Window
1 Back Return to the Main Menu.
2 Truck Info Enter truck information (weight, length, etc.).
3 Timers and Logs View driving, on-duty, and maintenance timers or state logs.
4 Quick Plan Quickly calculate a route between two major cities and display the distance,
driving time and cost.
5 Motor Carriers’ Road Atlas Road Info View Rand McNally Truck Emergency contact information.
6 Calculator Use a large key calculator.
7 Converter Quickly convert distance, weight and temperatures.
8 Tell Rand Compose and send a message to Rand McNally
9 Warnings Set warning distances for driving time, duty hours and upcoming weigh
stations. Note: the warning type (audio or visual) is set in Preferences.
Truck Tools Window
3
1
2
5
6 7 8 9
4
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 74
Timers and Logs
View Timers and Odometer ReadingsFrom the Main Menu:
1 Tap Truck Tools > Timers and Logs > Timers. The Timers Tab displays.
2 To reset a timer, tap on the timer. The Timer Reset Window displays.
On the left, use the Change To field to make corrections to mileage or hours. The mileage/hours then continue to count down from the changed value. This would be used occasionally if you need to make an adjustment to the current value.
On the right, use the Reset field to set the most common reset value, normally 0. At the beginning of each day or run, tap Reset to set the value back to zero.
3 To change the current reading, in the Change To field, use (TruckInfo_MinusButton.bmp) and (TruckInfo_PlusButton.bmp) to specify the new setting, then tap Change.
4 To reset the maximum settings, tap Reset.
5 Tap Back to save changes.
Location Route Options Window
Timer Reset Window
Timers Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 75
View Driver LogsFrom the Main Menu:
1 Tap Truck Tools > Timers and Logs > Logs. The Logs Window displays.
2 Under the appropriate month, tap on the state. The State Log Window displays.
Location Route Options Window
State Log Window
Logs Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 76
Calculate a Quick RouteNote: This tool is not available for all locations. Use this tool to quickly estimate the mileage and time between 500 major cities in North America.
From the Main Menu:
1 Tap Truck Tools > QuickPlan. The Quick Planner Window displays. The revenue or cost per mile used in the last computation displays.
2 Tap Major City 1 and select the city.
3 Tap Major City 2 and select the city.
4 To change the revenue or mileage cost, tap Revenue or Cost per Mile and enter the per mile rate. The Enter Amount Window displays.
5 Tap the new dollar amount and tap Enter. The Quick Planner Window re-displays and shows the updated route costs.
Enter Amount Window
Quick Planner Window with conversion
Quick Planner Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 77
View Rand McNally Motor Carriers Road Atlas Emergency InformationFrom the Main Menu:
1 Tap Truck Tools > M. C. R. A Emergency Info. The M.C.R.A. Emergency Info Window displays.
2 Select the appropriate tab. The State List or Province List displays.
3 Tap on the appropriate state or province. The Motor Carriers’ Road Atlas Road Info Window for the selected location displays.
4 Use the Up and down buttons to view all the information.
Note: Rand McNally will periodically provide text updates regarding changes to truck routing. These updates can be found in each state. If you see a discrepancy between posted routes and the route provided on the TND this may explain the cause.
M.C.R.A. Atlas Information Window
M.C.R.A. Info Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 78
Use the CalculatorFrom the Main Menu:
• Tap Truck Tools > Calculator.
Calculator
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 79
Use the Unit ConverterFrom the Main Menu:
1 Tap Truck Tools > Convertor. The Converter Window displays
2 Tap on the first field and select the type of conversion to perform. The Conversion Amount Window displays.
3 Tap on the second field and enter the value to be converted.
4 Tap Enter. The Converter Window re-displays and show the converted value.
Conversion Amount Window
Converter Window
Conversion Types Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 80
Send a Message to Rand McNally
You can send a message to Rand McNally about updates, such as road construction, updates to truck restricted road information, etc.
To use this feature, you must install the TND Dock application on your computer. See “Install TND Dock Software” on page87 for more information.
Send a Message on Your Current LocationFrom the Main Menu:
1 Tap Truck Tools > Tell Rand. The Tell Rand McNally About Window displays.
2 On the left side of the window, tap Current Location. Your current location appears below the buttons.
3 On the right side of the window, tap the type of message you want to send. The Enter Message Window displays.
4 Type your message.
5 When finished, tap Enter to save the message.
To discard the message and return to the previous window, tap Back. The Tell Rand McNally About Window re-displays.
Note: You only need to enter a few brief words here, since you will be able to modify the message later in TND Dock, using your computer keyboard, before it is sent to Rand McNally
You can send message your message to Rand McNally the next time you connect your IntelliRoute® TND™ 500 to your computer and use TND Dock.
Location Route Options Window
Enter Message Window
Tell Rand McNally About Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 81
Send a Message on a Different LocationFrom the Main Menu:
1 Tap Truck Tools > Tell Rand. The Tell Rand McNally About Window displays.
2 On the left side of the window, tap Enter a Different Location. The Select Address Window displays.
3 Search for select the location. The selected location appears below the buttons.
4 On the right side of the window, tap the type of message you want to send. The Enter Message Window displays.
5 Type your message.
6 When finished, tap Enter to save the message.
To discard the message and return to the previous window, tap Back. The Tell Rand McNally About Window re-displays.
Your message is sent to Rand McNally the next time you connect your IntelliRoute® TND™ 500 to your computer and use TND Dock.
Select Address Window
Enter Message Window
Tell Rand McNally About Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 82
Send a Message on a Location on the MapFrom the Main Menu:
1 Tap Truck Tools > Tell Rand. The Tell Rand McNally About Window displays.
2 On the left side of the window, tap Enter a Different Location. The Map Window displays.
3 Move the cursor to the location and tap Back. The selected location appears below the buttons.
4 On the right side of the window, tap the type of message you want to send. The Enter Message Window displays.
5 Type your message.
6 When finished, tap Enter to save the message.
To discard the message and return to the previous window, tap Back. The Tell Rand McNally About Window re-displays.
Your message is sent to Rand McNally the next time you connect your IntelliRoute® TND™ 500 to your computer and use TND Dock.
Map Window
Enter Message Window
Tell Rand McNally About Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 83
Customize
Truck Information
Note: Only available when in Truck mode. See “Select Truck or Car Mode” on page 22.
Hazmat Type Specify the load hazardous material type. Options are: None (not hazardous materials), Explosives, Gas, Flammable, Flammable Solids, Organic, Poison, Radioactive, Corrosives, Other, and PIH.
Weight Use and to specify the truck weight.
Height Use and to specify the truck height.
Width Use and to specify the truck width.
Trailers Specify the type of trailer(s). Options are Straight, 48', 53', and Double.
Set Truck OptionsFrom the Main Menu:
2 Tap Truck Tools > Truck Info.
2 Tap and to view the options.
2 Tap the option to change.
2 Enter the new information.
2 Tap Back to save changes.
Note: Rand McNally will periodically provide text updates regarding changes to truck routing. These updates can be found in each state. If you see a discrepancy between posted routes andthe route provided on the TND this may explain the cause.
Set Truck Options
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 84
Device and Map Display Settings
Warnings Select the type of speed warning to be issued. Options are: Audio, Visual, Audio & Visual, or None. (See “Warning Settings” on page 87 for more information on setting warnings.)
Vehicle Type Select the vehicle mode. Options are: Truck or Car. This options controls how routes are calculated. When the Car mode is selected, some truck-related features are not available. See “Select Truck or Car Mode” on page 22.
Units Select how vehicle weight is displayed. Options are Imperial or Metric.
Day/Night Map Color Select the default display mode for the device. Options are: Auto (the device switches between modes depending on the time of sunrise and sunset), Day Mode (the display uses brighter colors), and Night Mode (the display uses darker colors).
POI Icons Specify whether Point of Interest icons display on the map. Options are: POI Icons On or POI Icons Off.
Language Select the language to be displayed on screen and to be used with spoken directions. Options are English, Spanish, or French.
Keyboard Select the type of keyboard to be used. Options are: ABC or Computer.
Yard Time Zone Select the yard time zone. The IntelliRoute® TND™ 500 calculates time zones for the truck and destination based on this settings. Options are: Pacific Standard, Mountain Standard, Central Standard, Eastern Standard, Alaska Standard, or Hawaii Standard.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 85
About View device information.
GPS Data View information on the current GPS fix.
Align Screen Calibrate the touch screen. Note: If your TND seems to have buttons that are hard to hit, try this. This can happen sometimes after a software update from TND Dock.
Brightness Set the brightness level for screen display.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 86
Set Device and Map Display OptionsFrom the Main Menu:
1 Tap Preferences.
2 Tap the Device tab.
3 Tap and to view the options.
4 Tap the option to change.
5 Enter the new information.
6 Tap Back to save changes.
Device Settings Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 87
Routing Settings
Note: When a specific type of roadway (Tollways, Ferries, or Freeways) or maneuver (U-turns) is set to Avoid, a returned route may still include them if the only legal route found contains these types of roads.
Routing Select the type of route to be calculated. Options are: Fastest Route (shortest travel time) or Shortest Route (shortest travel distance).
Tollways Select whether highways are considered in a calculated route. Options are: Allow Tollways or Avoid Tollways. See Note above.
Ferries Select whether ferries are considered in a calculated route. Options are: Allow Ferries or Avoid Ferries. See Note above.
Freeways Select whether freeways are considered in a calculated route. Options are: Allow Freeways or Avoid Freeways.
U Turns Select whether u-turns are considered in a calculated route. Options are: Allow U-Turns or Avoid U-Turns. See Note above.
Cross Country Borders Select whether roads crossing a country border are considered
in a calculated route. Options are: Allow Crossing Country Borders or Avoid Crossing Country Borders. When set to Avoid, a route may still cross country borders if the only legal route contains roads that cross borders.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 88
Set Routing OptionsFrom the Main Menu:
1 Tap Preferences.
2 Tap the Routing tab.
3 Tap and to view the options.
4 Tap on the option to change.
5 Enter the new information.
6 Tap Back to save changes.
Routing Settings Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 89
Warning Settings
Note: Only available when in Truck mode. See “Select Truck or Car Mode” on page 22.
Note: Also see the Warning option in “Device and Map Display Settings” on page 84 for information on setting how warnings will be issued (visual, audio, visual and audio, etc.)
Use (TruckInfo_MinusButton.bmp) and (TruckInfo_PlusButton.bmp) to change warning settings.
Driving Day Specify when (in hours and minutes) to issue a warning before reaching your driving hours limit.
On Duty Hours Specify when (in hours and minutes) to issue a warning before reaching your duty hour limit.
Speed Limit Specify when (in MPH) to issue a warning when exceeding the speed limit.
State Border Specify when (in miles) to issue a warning about an upcoming state border.
Tollbooth Specify when (in miles) to issue a warning about an upcoming tollbooth.
Weigh Station Specify when (in miles) to issue a warning about an upcoming weigh station.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 90
Set Warning OptionsFrom the Main Menu:
1 Tap Truck Tools > Warnings.
2 Tap and to view the options.
3 Tap the option to change.
4 Enter the new information.
5 Tap Back to save changes.
Warnings Settings Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 91
This page intentionally left blank
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 92
TND Dock
Install TND Dock Software
Note: If a “Transfer Music” message displays, click Cancel to close the message and continue the installation.
On the computer:
1 Click Run Rand McNally TND Dock using the program provided on the device. The Welcome to Rand McNally Setup Wizard displays.
2 Click on the I Agree button and tap Next.
The License Agreement Window displays.
If you do not agree, click on I Do Not Agree and tap Next to end the installation.
3 Follow onscreen instructions to complete the installation. When finished, the Installation Complete Window displays.
The TND Dock icon displays in the system tray in the lower right corner of your screen.
License Agreement Window
TND Dock Icon
Welcome to Rand McNally Setup Wizard Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 93
Set Up to Use TND Dock
1 Turn on your IntelliRoute® TND™ 500 and allow it to power up.
2 Connect the device to your computer using the USB cable.
Open the TND Dock Main WindowNote: If a “Transfer Music” message displays, click Cancel to close the message and continue the installation.
• Double-click on the TND Dock icon in the system tray.
TND Dock Icon
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 94
TND Dock Main Window1 Sign up for Road Construction Updates
Click on this checkbox to sign up to automatically receive road construction updates.
2 Update My GPS Click to update your IntelliRoute® TND™ 500 software.
An exclamation mark indicates updates are available.
Note: You can download the updates without having your TND connected.
3 Backup/Restore My GPS
Click to backup your GPS data. This button is also used to restore backed up data to your device.
4 Show IntelliRoute GPS Info Click to view device ID number and last software update date.
5 Read GPS Manual Click to view the IntelliRoute® TND™ 500 User’s Guide.
6 Tell Rand McNally Click to send a message to Rand McNally.
An exclamation mark indicates messages are ready to be sent to Rand McNally. You can click this button to review and edit messaages to Rand McNally.
7 Go to the Rand McNally Website Click to view the Consumer website.
8 Go to the Rand McNally Commercial Transportation Website Click to view the Trucking website.
TND Dock Main Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 95
IntelliRoute TND 500
Check for IntelliRoute TND 500 Software UpdatesOn the TND Main Window:
An exclamation mark next to the Update My GPS button indicates that updates are available.
1 Roll your mouse pointer over the Update My GPS button and click Update Now. The Updating GPS Window displays. TND Dock checks for software updates.
2 If updates are found, click OK to update the software on your device. The GPS Updates Progress Bar displays as the updates are transferred to your device. When finished, a “GPS Successfully Updated” displays.
3 Click OK. The TND Main Window re-displays.
Note: You can download the updates without having your TND connected.
TND Dock Main Window
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 96
View IntelliRoute TND 500 InformationThese logs are part of our continuous improvement program and only contain information that can be used to diagnose software problems during device operation. No location, tracking or personal information is included.
On the TND Main Window:
1 Click on the Show IntelliRoute TND Info button. The TND Info Window displays.
2 To send logs to Rand McNally, click on the Send Logs button. The Send Logs to Rand McNally Window displays.
3 In the Number of Days to Send field, select how many days worth of information will be sent to Rand McNally.
4 Tap Send. The TND Dock Main Window re-displays.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 97
Backup TND InformationThe backup is created on your personal computer. Internet access is not required to use this feature. Rand McNally respects your privacy and cannot access or back up your personal information.
On the TND Main Window:
1 Roll your mouse pointer over the Backup/Restore My TND button and click Backup My TND. The TND Dock Backup Type Window displays.
2 Click on the type of backup to be performed:
• Full Backup - Backup the device software and personal data, such as trips and address book.
• User Data Only - Backup only personal data, such as trips and address book.
The Backup TND Progress Bar Window displays. When finished, a message displays.
3 Click OK. The TND Main Window re-displays.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 98
Restore GPS InformationOn the TND Main Window:
1 Roll your mouse pointer over the Backup/Restore My GPS button and click Restore My GPS. The TND Dock Restore Type Window displays.
2 Click on the type of restor to be performed:
• Full Restore - Restore device software and personal data, such as trips and address book.
• User Data Only - Restore only personal data, such as ts and address book.
The Restore GPS Progress Bar Window displays.
NOTE: DO NOT DISCONNECT YOUR UNIT DURING THIS PROCESS OR YOUR UNIT COULD BECOME INOPERATIVE.
When finished, a message displays.
3 Click OK.
The TND Main Window re-displays.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 99
View ManualNote: Adobe Acrobat Reader is required to view the IntelliRoute® TND™ 500 User’s Guide
On the TND Main Window:
• Click on the Read Intelliroute TND Manual button. The User Guide displays in an Adobe Acrobat Reader Window.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 100
Sign Up for Road Construction Updates
On the TND Dock Main Window:
1 Click on the Sign Up for Road Construction Updates checkbox. The Free Road Construction Updates Window displays.
2 Enter your e-mail address in the provided fields.
3 To receive additional offers and information, select:
• Receive Rand McNally product offers.
• Receive Rand McNally newsletter.
4 Click Submit. The TND Main Window re-displays.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 101
Tell Rand McNally
On the TND Dock Main Window:
1 Click on the Tell Rand McNally button. The Tell Rand Window displays. Here you wil see comments you have entered on your TND.
2 To add a comment, click Add Comment and enter information in the provided fields.
3 To delete a comment, click on the comment and click Delete Comment.
4 When finished, click Done.
The Send Comments Window displays.
5 Click:
• Yes to send comments now.
• No to send comments later.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 102
Go To Websites
Note: Connection to the internet is required to access the websites.
Rand McNally ConsumerOn the TND Dock Main Window:
• Click on the Go to the Rand McNally Website button. The Rand McNally Consumer Home Page displays.
Rand McNally Commercial TransportationOn the TND Dock Main Window:
• Click on the Go to Rand McNally’s Commercial Transportation Website button. The Rand McNally Commercial Transportation Home Page displays.
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 104
Index
Aabout GPS ....................................................................... 2address .......................................................................... 30Address Book create a group ............................................................ 50 save a location to ........................................................ 48 select a location from .................................................. 49 select a location from group ....................................... 51addresses Location Selection Window ......................................... 30 search for an address .................................................. 31 search near a city center ............................................. 32 search near an intersection ......................................... 33audio output socket ......................................................... 1auto-complete ......................................................... 27, 28
BBasic settings ................................................................. 20 mute/umute ................................................................ 21 select a keyboard type ................................................ 20 select driver status ...................................................... 20 select truck or car mode .............................................. 22 set the route type ....................................................... 23 set truck information .................................................. 21 set truck yard time zone .............................................. 22 set warnings ............................................................... 23 volume settings ........................................................... 21battery power indicator .............................................. 1, 11
Ccharge the battery ......................................................... 12 first time use ............................................................... 12 with the USB cable ...................................................... 12 with the vehicle charger .............................................. 12 with the wall charger .................................................. 12customer support ............................................................. 5customize ...................................................................... 81 device and map settings .............................................. 82 set device and map options ..................................... 83 routing settings ........................................................... 84 set routing options ................................................... 84 truck information ........................................................ 81 set truck options ...................................................... 81 warnings .................................................................... 85 set warning options ................................................. 85
Ddestinations ................................................................... 25 Destination Selection Window .................................... 26 ways to find ................................................................ 25device use standby ................................................................ 14
Ffeatures ........................................................................... 3find addresses ................................................................ 30From .............................................................................. 74
HHistory List select a location from .................................................. 52
Iinstall mount ........................................................................ 13
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 105
Kkeyboards ABC ............................................................................ 19 auto-complete ...................................................... 27, 28 Computer (QWERTY) .................................................. 19 special keys ................................................................ 19
Llocation select from History List ................................................ 52
MMain Menu .................................................................... 18manage destinations ...................................................... 48 create an Address Book group .................................... 50 save a location to Address Book .................................. 48 select a location from Address Book ........................... 49 select a location from Address Book group .................. 51maps cancel a route ............................................................. 69 Confirmation Window ........................ 59, 60, 61, 62, 63 detour around a specific roadway ............................... 68 detour around part of route ........................................ 67 Route Map Window ................................................... 66mini-USB port .................................................................. 1mount install .......................................................................... 13multi-stop routes ........................................................... 53 add locations to .......................................................... 54 create ......................................................................... 53 delete ......................................................................... 58 optimize ..................................................................... 55 remove a stop ............................................................. 56 select a saved .............................................................. 57
PPoints of Interestsearch along the route ......................... 42 search in a city ............................................................ 41 search near destination ............................................... 43 search near end of day ................................................ 44 search near truck location ......................... 37, 38, 39, 40 tap on map and route to ............................................. 46 tap on the map and avoid ........................................... 45points of interest (POIs) .................................................. 40 Points of Category Window ........................................ 35 Points of Interest Selection Window ............................ 34power key ........................................................................ 1power the device ........................................................... 14
Rreset button ..................................................................... 1reset the device .............................................................. 15routes cancel ......................................................................... 69
Ssafety information ............................................................ 8 device safety ............................................................... 10 installation safety .......................................................... 9 navigation safety ........................................................... 8SD card slot ..................................................................... 1select a city .................................................................... 29speaker ............................................................................ 1standby .......................................................................... 14start the device .............................................................. 17
Rand McNally IntelliRoute® TNDTM 500 User’s Guide 106
TTND Dock GPS backup .................................................................... 92 check for updates .................................................... 90 restore ..................................................................... 93 view GPS info .......................................................... 91 view User Guide ...................................................... 94 install .......................................................................... 87 messages .................................................................... 96 set up to use ............................................................... 88 sign up for road construction updates ......................... 95 system tray icon .......................................................... 88 TND Doc Main Window .............................................. 89 websites ..................................................................... 97 Commercial Transportation ...................................... 97 Rand McNally Consumer .......................................... 97traffic antenna socket ...................................................... 1truck tools calculate a quick route ................................................ 74 calculator .................................................................... 76 send a message to Rand McNally ................................ 78 current location ....................................................... 78 different location ..................................................... 79 location on map ....................................................... 80 timers and logs ........................................................... 72 view driver logs ........................................................ 73 view timers and odometers ..................................... 72 Truck Tools Window .................................................... 71 unit converter ............................................................. 77 view MCRA emergency info ........................................ 75turn off the device ......................................................... 14turn on the device ......................................................... 14turn-by-turn list ............................................................. 64 view ............................................................................ 65
UUser Guide ..................................................................... 94
Wwhat’s included ................................................................ 7windows Confirmation ...................................... 59, 60, 61, 62, 63 Destination Selection .................................................. 26 Location Selection ....................................................... 30 Main Menu ................................................................. 18 Points of Interest Category .......................................... 35 Points of Interest Selection .......................................... 34 Route Map .................................................................. 66 TND Dock Main .......................................................... 89 Truck Tools .................................................................. 71