Smart Life Camera S1

User Manual

QR code: Youtue video

You can scan the QR code to check the install video on Youtube

Version 2.0

Thank you very much for purchasing the Jayol Mini Spy

Camera WiFi. Please read the instruction manual carefully

and use it correctly and safely. Please keep it in a safe place

for future reference.

If you have questions about this camera, you can check out

our "Questions & Answers" at the end of the manual.

Notes ( Very important ): This is high-tech product, please read

the instruction carefully before using camera. If you don’t

know how to install it or other questions, please contact us by

this e-mail:

Support_Jayol@163.com

Please read user manual before using

1

Catalogue

1. How To Download APP ............................................................ 2-2

2. Power ON & Power OFF Operation....................................2-4

3. IP Connection Mode .................................................................. 4-8

4. AP Connection Mode .................................................................8-10

5. Add The Camera To Other Phone........................................11-14

6.Interface introduction ..................................................................14-16

7. Reset The Device.........................................................................16-16

8. Two ways recording.....................................................................17-17

9. Working Mode Switching............................................................18-19

10. Indicators Introduction ...........................................................19-20

11. Questions &Answers.................................................................20-22

12. Attentions...................................................................................23-23

13. Customer service.......................................................................24-25

2

Product Details

1. How To Download APP

Scan QR Code or search keyword “iCookyCam” to download and

installation APP from application market.

Android ios

2. Power ON & Power OFF Operation

2.1 Insert Micro SD Card: Class 10 or above is recommended. Maximum

support 64GB (Please format memory card before using.)

Lens

Mode K2

Mic

Confirmation K1

Photosensitive

Nut base

Micro-SD Slot USB Port

Force Close

Blue IndicatorRed Indicator

Yellow Indicator

3

Warm Tips:

1. Pay attention to the direction of memory card!

2. Insert the SD card, the camera will turn on 24 hour loop recording

3. If have not insert SD card, the camera light is red & blue

2.2 Power ON: Connect the camera to power supply or long press

confirmation button K1( Power button) for 3 seconds, Red & Blue

indicator keeps on and then continuous scintillation, camera starts to

initialize(it takes around 60 seconds). After initialization succeed Blue

indicator flashes slowly, camera enters AP connection mode and starts

recording automatically.

Warm Tips:

1. If you want to power on without connecting to the USB charger, make

sure that the camera has enough power!

2. K1 is power button, K2 is “M” mode.

2.3 If the memory card is not inserted, the red and blue indicator flicker at

the same time when the machine is initialized, and the camera can't turn

on the video. Memory card does not support hot swap, if you want to pull

off or insert the memory card, Please turn off the camera first.

4

2.4 Power OFF: long press confirmation button K1 for 5 seconds, Red &

Blue indicator flashes for 7 times( About 7 seconds) and turn off.

NOTE: It is not possible to power off the camera through the above

operation when USB power is connected.

3. IP Connection Mode

3.1 After initialization succeed, Switch on Wi-Fi/WLAN, choose

iCooky_***** from available networks and type in password 12345678

(P 3.1)

P 3.1 Choose iCooky_*****

Warm Tips:The effective range of the WiFi signal iCooky_***** sent

by the camera is within 10 meters. When the mobile phone exceeds

the range, it will be disconnected from the WiFi signal.

5

3.2 Enter the APP → Click the "+" button → Choose “Not been

connected to the router”→ Click“Next”→ Enter the device password:

ok123456 → Click “√”-- Appears “Connect to the router?”, Select

“Yes”→ Select your home WiFi and enter its password→ Click

“Connect”to finish the setup. (P 3.2.1-3.2.7)

P 3.2.1 Login iCookyCam

P 3.2.2 Click “+” P 3.2.3 Click “Not been P 3.2.4 Click “Next”connected to the router”

6

P 3.2.5 Input the default password P 3.2.6 Click “Yes” P 3.2.7 Connect WiFi

3.3 The camera starts to restart after click”Connect”, Please wait for

about 90 seconds, at the same time, APP automatically returns to the

device list interface and successfully adds the camera to the list. Red light

flashes slowly after the camera reboots, and the camera turns into IP

connection mode. click the camera in the list to preview image and

control the camera. After this, you had finished the set of this camera

(P 3.3.1-3.3.2)

Warm Tips:

1. IP connection mode: Camera connect to router for unlimited distance

preview image, the light is Red; AP connection mode: Camera connect

to Wi-Fi of smart phone for short distance preview image, the light is blue.

If you want to remote use, please change the AP mode to IP mode.

7

2. Please choose the right network and type in correct password, the

camera turns to AP mode; If wrong password were typed in, please click

Delete on APP and withdraw from APP, check out APP and add a device

again.

3. In order to improve the stability and success rate of WiFi connection,

try to be close to the wireless router.

4. For initial use, the device requires a certain amount of time for IP

connection. Please wait patiently. ( About 1-3 minutes based on network

conditions). After the IP connection is successful, the red indicator flashes

slowly.

5. 5G WiFi is not supported temporarily, Please connect it with 2.4G

WiFi first. And the wifi password can not be empty.

8

P 3.3.1 Device list P 3.3.2 Viewing interface

4. AP Connection Mode

4.1 If you need only AP connections but not IP connections, please select

"No" when prompted "Connect to the router?" in the above P3.2.6

operation steps. APP automatically returns to the device list interface and

successfully adds the camera to the list. Click the camera in the list to

preview image and control the camera.(P 4.1.1-4.1.3)

4.2 How to change AP mode to IP mode: Tap the Screen → Click the

gear icon→ Choose Wi-Fi Setting → Select your router WiFi → Enter

your WiFi password → Select “OK”. (P 4.2.1- P. 4.2.5)

9

P 4.1.1 Click “No” P 4.1.2 Device list P 4.1.3 Viewing interface

P 4.2.1 Tap the Screen P4.2.2 Click the gear icon P.4.2.3 Choose Wi-Fi Setting

10

P.4.24 Select your router WiFi P. 4.2.5Enter your WiFi password

4.3 How to switch from IP connection mode to AP connection mode:

long press Mode button K2/M for 10 seconds.

Marks:

AP connection mode: Camera connect to Wi-Fi of smart phone for short

distance preview image.

IP connection mode: Camera connect to router for unlimited distance

preview image.

11

5.Add The Camera To Other Phone

If the camera has been connected to the Internet to work in IP remote

mode, when you want to add the camera to other people's APP, please

open APP on the other's phone, click the "+" in the middle or below the

interface, select the "Been connected to the router", and enter to the” Lan

Search” interface. (P 5.1-5.3)

P 5.1 Click “+” P 5.2 Click “Been P 5.3 Lan Search interfaceconnected to the router”

5.1 Search addition under the sameWiFi

If the mobile phone and the camera are connected to the same WiFi,

then in the "Lan Search" interface will automatically search all the

camera serial numbers under the WiFi, select the camera that you need to

add, and input device password (the default password is"ok123456")

can be added successfully. (P 5.1.1-5.1.2)

12

P 5.1.1 Select a camera P 5.1.2 Input the device password

5.2 Scanning QR code addition

Open the APP that has already added the camera, find the camera that

needs to be added in the device list, and click the share button in the

lower right corner to automatically generate a camera QR code. Open the

APP on the phone that needs to add the camera, enter the "Lan Search"

interface, click the QR code scan button in the lower left corner to open

the scan window, scan the generated camera QR code, and then input the

correct device password to add. (P 5.2.1-5.2.5)

13

P 5.2.1 Click QR code button P 5.2.2 Generating QR code

P 5.2.3 Click scan button P 5.2.4 Scan window P 5.2.5 Input the device password

5.3 Manual input addition

Open the APP that needs to add the camera, enter the "Lan Search"

interface to select the manual add button in the lower right corner, and

input the correct device UID and password in the "Add Device" interface

to be added successfully.(P 5.3.1-5.3.2)

14

P 5.3.1 Click Manual addition button P 5.3.2 Input UID&password

6. Interface Introduction

6.1 Device list interface

Menu

Device name

Check video andPhoto taken by APP

Add a device

QR code button

15

6.2 Real-time interface

6.3 Setting interface

Device name

Resolution

Listen

Image Flip

Night Vision

Online / Offline

Time display

Setting

Video Screen

Video On / Off

Full screen

Check video and

Photo taken by APP

Snapshot

Resolution

16

6.4 What are the functions of these buttons?

1. QR code button: You can share the QR code to let other connect to

this device.

2. Check video and Photo taken by APP: Check the phone recording in

your phone.

3. Device name: Click this button can adjust the device name.

4. Video On / Off: Click this button to start phone video recording.

5. Snapshot: Click this button to snapshot, the recording will in your phone.

6. Resolution:Choose the resolution ( 1080P/720P/VGA)which youwant.

7. Device indicator on/off: Turn on/ off the camera light.

8. Restore factory setting: Camera returns to the initial state

7. Reset The Device

1. Reset the network: Long press K2/M mode about 8 seconds can reset

the camera network.

2. Turn on/off the camera: Please long press K1/Power button

3. Forced shutdown:You can use the pin insert the hole to close the camera

17

8. Two ways recording

1. SD card recording:When you insert the micro SD card, the camera

will auto turn on 24 loop recording mode, and the recording will save in

your SD card file. (When SD card full records cover previous recording)

2. Phone recording: Click the icon, the camera will turn on phone

recording, and the recording will save in your phone.

Warm Tips:

1. You can live-stream the footage from anywhere in the world once you

connect this IP camera to your home WI-FI network.

2. When you insert the Micro SD card, the camera will Auto on 24 hour

loop recording, that means although the camera has not WiFi connect, it

still can recording. ( According to this method, you can use this camera

on outdoors)

18

9.Working Mode Switching

After initialization succeed, press Confirmation Button K1 once, the

camera turns into standby mode. Then press Mode Button K2 once to

change a working mode, in turn, they are: Full Time Video / Photo /

Motion Detection.

1. Full Time Video Mode

After initialization succeed, camera starts recording automatically, if

the camera working in AP mode, blue indicator flashes slowly, if the

camera working in IP mode, red indicator flashes slowly. Press

Confirmation Button K1 once, the camera turns into Full Time Video

Standby Mode and blue indicator keeps on(AP mode) or red indicator

keeps on(IP mode).

2. Photo Mode

In Full Time Video Standby Mode, press Mode Button K2 once, blue

indicator(AP mode) flashes 3 times quickly or red indicator(IP mode)

flashes 3 times quickly and then keeps on, the camera turns into Photo

Standby Mode. Press Confirmation Button K1 once, the camera turns into

photo mode and takes one photo every 15 seconds, at the same time, blue

indicator(AP mode) or red indicator(IP mode) flashes once. Press

Confirmation Button K1 again, the camera turns into Photo StandbyMode.

19

3. Motion Detection Mode

In Photo Standby Mode, press Mode Button K2 once, red & blue

indicator keeps on, the camera turns into Motion Detection Standby

Mode. When the camera detects object moving, blue indicator keeps on

& red indicator flashes slowly(AP mode) or red indicator keeps on & blue

indicator flashes slowly(IP mode), the camera starts recording

automatically.

10. Indicators Introduction

Camera Mode Light Status

AP Connection Mode Blue Light

IP Connection Mode Red Light

Full Time Video Mode

Working/StandbyLight Flashes / Light keeps on

Photo Mode

Working /Standby

Light Flashes once every 15 seconds/ Light

Flashes 3 times quickly and then keeps on

Motion Detection Mode

Working /Standby

Blue Light keeps on& Red Indicator Flashes;

Red Light keeps on& Blue Light Flashes /

Red & Blue Light keeps on

No Memory Card Blue & Red Light Flashes at the same time

Connect USB & insufficient

electricityYellow Light keeps on

20

Connect USB & Sufficient

quantity of electricityYellow Light keeps off

Unconnected USB Yellow Light keeps off

11. Questions & Answers

1. Question: How can I reset my camera network?

Answer: Long press M/K2 mode about 10 seconds to reset this camera.

After this network will be back to AP mode, you need to reconnect again

2. Question: I have been trying repeatedly to set this up and it keeps

saying offline?

Answer:① Please put the camera in the place which has a strong signal;

Please confirm that the signal on your phone is good.② Long press “M”

mode to reset the camera network ③ Keep your phone and camera

within 10 meters when you first time connects;④ Remove the device and

reconnect again.⑤ Check if your Wifi setting is correct or not, proper

password may be needed ⑥ Check our youtube link to know how to

install: http://bit.ly/2C5CeLZ

3. Question: What’s APmode & IPmode?

Answer:APconnection mode: Camera connect to Wi-Fi of smart phone for

short distance preview image. The light is blue; IP connection mode: Camera

connect to router for unlimited distance preview image.The light is red.

21

4. Question: How to change APmode to IPmode?

Answer: Enter to APP → Tap the Screen → Click the gear icon →

Choose Wi-Fi Setting → Select your router WiFi → Enter your WiFi

password → Select “OK” .

5. Question: Can it be accessed anywhere via the internet or by the

app?

Answer: You can live-stream the footage from anywhere in the world

once you connect this mini camera to your home WI-FI network. ( Please

change AP mode to IP mode)

6. Question: Can I use it on outdoors?

Answer: Insert the Micro SD card, the camera will turn on 24 hour loop

recording ( NOWiFi need), so you can use it on outdoors.

Warm tips: This camera can run 4 to 5 hours in full charge, If you

are using it outdoors for a long time, please prepare a backup power

supply.

7. Question: How to set motion detection?

Answer: Enter to APP- Tap the screen-- Click the gear icon-- Choose "

Event setting" --turn on the "Switch" and then confirm.

Warm tips: Please make sure your phone allows APP to push

information; If you put the camera in strong signal place, it works

22

will be better.

8. Question: How do I stop the camera from reflecting in glass?

Answer: You can try to turn off the indicator light. How to set: Enter to

APP--Tap the screen--Click the gear icon--Choose the "indicator" Turn off it

9. Question: How can I turn on the night vision?

Answer: The night vision is Auto, It will turn on infrared lights

automatically once the environment getting dim.

10. Question: how do you know when the battery needs charging?

Answer: You can use the light to judge. Connect USB and insufficient

electricity the YELLOW light is keeps on; Connect USB and Sufficient

quantity of electricity, the yellow light will be turned off.

11.Question: How long it takes for battery full charged?

Answer: It takes around 5 hours for full charging the battery.

12. Question: What’s the function of the pin?

Answer:You can use the pin to insert the hole to forced shutdown the camera

23

12. Attentions

1. Please note this camera can not support 5G network, pls connect it

with 2.4G wifi.

2.Use qualified charger, input voltage 5V/1A.

3. Do not drop this product or subject it to strong impact.

4. Do not touch the camera lens and image sensor directly. If you

need to clean, please use dry The net soft fabric slightly moistened

with alcohol and wiped gently to remove dirt;

5. Avoid direct light, such as strong sunlight, focusing lighting

otherwise it is easy to cause images too bright or pulling light (in

this case not equipment failure), and reduce the life of the

photosensitive sensor;

6. Avoid working under extreme conditions such as moisture, dust,

extreme cold, extreme heat, etc. Degree -5 °C -50 °C, do not

place strong electromagnetic radiation and other places.

7. Avoid heat accumulation, please do not artificially block the

ventilation near the camera, keep a good cooling ring territory.

8. Please strictly abide by the relevant laws and decrees of the state,

and shall not use this product for any illegal purposes, otherwise the

consequences will be conceited.

9. Please format the TF card before using and format the TF card

once every three months.

24

13. Customer service

If you are not satisfied with this product...

Jayol offers you a 12-month guarantee without risk. If you have any

questions when using our products, you can contact me at any time

by email. We will not hesitate to provide you with customer support,

and soon you will receive Come to our friendly response.

If you don't like this product, please contact us at

Support_Jayol@163.com. Our customer service team will try us

best to help you or give you some compensates.

25

If you are satisfied with this product...

As we all know, the voice of the customer is a very good reference

for other buyers. If you are satisfied our product, we hope that you

would be willing to leave a review of our product on Amazon.

User reviews are vital to our research and development, and

having your input will enable us to continue making a product that

you enjoy using. we will resend a gift to you., even a word will be

very informative, and we will be very grateful for it.

Our service email:

Support_Jayol@163.com