user module nmap - advantech b+b

7
User module NMAP APPLICATION NOTE

Upload: others

Post on 04-Jan-2022

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: User module NMAP - Advantech B+B

User module NMAP

APPLICATION NOTE

Page 2: User module NMAP - Advantech B+B

USED SYMBOLS

Used SymbolsDanger – important notice, which may have an influence on the user’s safety or the functionof the device.

Attention – notice on possible problems, which can arise in specific cases.

Information, notice – information, which contains useful advice or special interest.

GPL LicenseSource codes under GPL license are available free of charge by sending an email to:

[email protected].

Conel s.r.o., Sokolska 71, 562 04 Usti nad Orlici, Czech Republic

Manual issued in CZ, October 7, 2014

i

Page 3: User module NMAP - Advantech B+B

CONTENTS

Contents

1 Description of user module 1

2 Recommended literature 3

ii

Page 4: User module NMAP - Advantech B+B

LIST OF FIGURES

List of Figures1 Web interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 NMAP help (Telnet or SSH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

iii

Page 5: User module NMAP - Advantech B+B

1. DESCRIPTION OF USER MODULE

1. Description of user module

User module NMAP is not contained in the standard router firmware. Uploading of this usermodule is described in the Configuration manual (see [1, 2]).

The user module is v2 and v3 router platforms compatible.

This module allows user to perform TCP and UDP scan. It can also be used for sendingpings (i.e. IP datagrams, which are intended to verify the functionality of a connection betweentwo network interfaces).

NMAP module has a web interface which can be invoked by pressing the module name onthe User modules page of the router web interface. The left part of the web interface (ie. menu)contains only the Return item, which switches this web interface to the interface of the router.In the right part are displayed the following information:

• Nmap module is located in /opt/nmap/bin/nmap

• For help type /opt/nmap/bin/nmap -h

Figure 1: Web interface

The first line informs about the location of NMAP user module and the second informsabout a way to display help for this module. After invoking the help, a list of all parameterswhich can be used in the context of this module is printed (see figure on next page). Most ofthem can be combined.

1

Page 6: User module NMAP - Advantech B+B

1. DESCRIPTION OF USER MODULE

Figure 2: NMAP help (Telnet or SSH)

2

Page 7: User module NMAP - Advantech B+B

2. RECOMMENDED LITERATURE

2. Recommended literature[1] Conel: Configuration manual for v2 routers[2] Conel: Configuration manual for v3 routers

3