user manualg-ec2.images-amazon.com/images/g/01/hardlines/usermanual/... · 2015. 2. 23. · d-link...

USER MANUALDCS-932L

VERSION 1.0

2D-Link DCS-932L User Manual

Table of Contents

Product Overview .............................................................. 4

Package Contents ......................................................................... 4

System Requirements ................................................................. 4

Introduction ................................................................................... 5

Features ............................................................................................ 6

Hardware Overview ..................................................................... 7

Front View ................................................................................ 7

Rear View ................................................................................. 8

Installation ......................................................................... 9

Hardware Installation .................................................................. 9

Wireless Installation Considerations ....................................10

Camera Installation Wizard .....................................................11

WPS - Push Button Setup .........................................................12

mydlink Portal .................................................................13

Camera Status ..............................................................................14

Live Video ......................................................................................15

Camera Settings ..........................................................................16

Camera Info ..................................................................................17

WEB Coniguration ..........................................................18

Using the WEB Coniguration Menu ....................................18

Live Video ..............................................................................20

Setup .......................................................................................20

Wizard ..............................................................................20

Internet Connection Setup Wizard ........................21

Network Setup ..............................................................23

Wireless ............................................................................24

DDNS ...............................................................................25

Image Setup ..................................................................26

Video ................................................................................27

Video Coniguration ....................................................27

Audio ................................................................................28

Motion Detect ...............................................................29

Mail....................................................................................30

Time Schedule ..............................................................31

FTP .....................................................................................32

Time Schedule ..............................................................33

Time and Date ...............................................................34

Day/Night Mode ...........................................................35

Maintenance .........................................................................36

Admin ...............................................................................36

System..............................................................................37

Firmware Upgrade .......................................................38

Device Info .....................................................................39

Active User .....................................................................40

Wireless Security .............................................................41

What is WEP? ................................................................................41

What is WPA? ................................................................................42

Coniguring the DCS-932L with a Router ..........................43

Table of Contents


Table of Contents

Troubleshooting ..............................................................49

Wireless Basics .................................................................52

Wireless Modes ............................................................................56

Networking Basics ...........................................................57

Check your IP address ...............................................................57

Statically Assign an IP Address ..............................................58

Technical Speciications ..................................................59


Section 1 - Product Overview

� DCS-932LWirelessNDay/NightHomeNetworkCamera• CAT5EthernetCable• PowerAdapter• ManualandSoftwareonCD• QuickInstallGuide• MountingKit

Note: Using a power supply with a diferent voltage than the one included with your product will cause damage and void the warranty for this product.

Ifanyoftheaboveitemsaremissing,pleasecontactyourreseller.

System Requirements

� ComputerwithMicrosoftWindows®7,Vista®,orXP• PCwith1.3GHzorabove;atleast128MBRAM• InternetExplorer6orabove,Firefox3.5orabove,Safari4andChrome• Existing10/100Ethernet-basednetworkor802.11b/g/nwirelessnetwork

Product OverviewPackage Contents



IntroductionCongratulations on your purchase of the DCS-932L Wireless N Day/Night Home Network Camera. The DCS-932L is a versatile

anduniquesolutionforyoursmalloiceorhome.Unlikeastandardwebcam,theDCS-932Lisacompletesystemwithabuilt-inCPUandwebserverthattransmitshighqualityvideoimagesforsecurityandsurveillance.TheIRLEDprovidesaroundtheclocksurveillanceregardlessofthelightingconditions.TheDCS-932Lcanbeaccessedremotely,andcontrolledfromanyPC/NotebookoveryourlocalnetworkorthroughtheInternetviaawebbrowser.Thesimpleinstallationandintuitiveweb-basedinterfaceofereasyintegrationwithyourEthernet/FastEthernetor802.11b/g/nwirelessnetwork.TheDCS-932Lalsocomeswith remote monitoring and motion detection features for a complete and cost-efective home security solution.



S�� o Use

TheDCS-932Lisastand-alonesystemwithabuilt-inCPU,requiringnospecialhardwareorsoftwaresuchasPCframegrabbercards.TheDCS-932LsupportsbothActiveXmodeforInternetExplorerandJavamodeforotherbrowserssuchasFirefox®andSafari®.

Supports a Variety of Platforms

SupportingTCP/IPnetworking,HTTP,andotherInternetrelatedprotocols.TheDCS-932LcanalsobeintegratedeasilyintootherInternet/Intranetapplicationsbecauseofitsstandards-basedfeatures.

802.11b/g/n Wireless or Ethernet/Fast Ethernet Support

TheDCS-932Loferswireless802.11b/g/nandEthernet/FastEthernetconnectivity,making theDCS-932Leasy to integrate intoyourexistingnetworkenvironment.TheDCS-932Lworkswitha10MbpsEthernetbasednetworkor100MbpsFastEthernetbasednetworkfortraditionalwiredenvironments,andworkswith802.11b/g/nroutersoraccesspointsforaddedlexibility.TheSiteSurveyfeaturealsoallowsyoutoviewandconnecttoanyavailablewirelessnetworks.

Web Coniguration

UsingastandardWebbrowser,administratorscanconigureandmanagetheNetworkCameradirectlyfromitsownWebpageviaIntranetorInternet.ThismeansyoucanaccessyourDCS-932Lanytime,anywhereintheworld.

Broad Range of Applications

Withtoday’shigh-speedInternetservices,theNetworkCameracanprovidetheidealsolutionfordeliveringlivevideoimagesovertheIntranetandInternetforremotemonitoring.TheNetworkCameraallowsremoteaccessusingaWebbrowserforliveimageviewing,andallowstheadministratortomanageandcontroltheNetworkCameraanytime,anywhereintheworld.Manyapplicationsexist,includingindustrialandpublicmonitoringofhomes,oices,banks,hospitals,child-carecenters,andamusementparks.

Remote Monitoring Utility

The D-ViewCam application adds enhanced features and functionality for the Network Camera and allows administrators to conigure and access

theNetworkCamerafromaremotesiteviaIntranetorInternet.Otherfeaturesincludeimagemonitoring,recordingimagestoaharddrive,viewingupto32camerasononescreen,andtakingsnapshots.

IR LED for Day and Night functionality

Thebuilt-ininfraredLEDsenablesnighttimeviewingofupto16feet(5meters).

Features



Hardware OverviewFront View

Power and Link LED

Camera Lens

Microphone

IR LEDL��t Sensor



Rear View

Power Receptor Ethernet Port

Reset

WPS LED

WPS Button

Camera Stand


Section 2 - Installation

Hardware Installation

Connect the Ethernet Cable

Connect the included Ethernet cable to the network cable connectorlocatedonthebackpaneloftheDCS-932Landattachittothenetwork.

Attach the External Power Supply

Attach theexternalpower supply to theDCPower receptor locatedonthe rearbackpanelof theDCS-932L and connect it to yourwall outletor power strip. Power is conirmed when the green LED Power Indicator

locatedbelowthelensontheDCS-932Lisilluminated.

Installation



Wireless Installation Considerations

The D-Link Wireless Network Camera lets you access your network using a wireless connection from anywhere within the operating range of your

wirelessnetwork.However,thenumber,thicknessandlocationofwalls,ceilings,orotherobjectsthatthewirelesssignalsmustpassthrough,maylimittherange.TypicalrangesvarydependingonthetypesofmaterialsandbackgroundRF(radiofrequency)noiseinyourhomeorbusiness.Thekeytomaximizingwirelessrangeistofollowthesebasicguidelines:

1. Minimizethenumberofwallsandceilingsbetweenyouradapterandothernetworkdevices(suchasyourNetworkCamera)-eachwallorceilingcanreduceyouradapter’srangefrom3-90feet(1-30meters).

2. Beawareofthedirectlinebetweennetworkdevices.Awallthatis1.5feetthick(.5meters),ata45-degreeangleappearstobealmost3feet(1meter)thick.Ata2-degreeangle,itlooksover42feet(14meters)thick.Positionyourdevicessothatthesignalwilltravelstraightthroughawallorceiling(insteadofatanangle)forbetterreception.

3. Building Materials make a diference. A solid metal door or aluminum studs may weaken the wireless signal. Try to position your

accesspoints,wirelessrouters,andothernetworkingdeviceswherethesignalpassesthroughdrywalloropendoorways.Materialsandobjectssuchasglass,steel,metal,wallswithinsulation,water(ishtanks),mirrors,ilecabinets,brick,andconcretewilldegradeyour wireless signal.

4. Keepyourproductatleast3-6feetor1-2metersawayfromelectricaldevicesorappliancesthatgenerateRFnoise.

5. Ifyouareusing2.4GHzcordlessphonesorotherradiofrequencysources(suchasmicrowaveovens),yourwirelessconnectionmaydegradedramaticallyordropcompletely.Makesureyour2.4GHzphonebaseisasfarawayfromyourwirelessdevicesaspossible.Thebasetransmitsasignalevenifthephoneinnotinuse.



Insert the Installation CD-ROM into your computer’s optical drive to start the autorun program.

The CD-ROM will open the Camera Installation Wizard. Simply click StarttogothroughtheInstallationWizard,whichwillguideyouthroughtheinstallation process from connecting your hardware to coniguring your camera.

Camera Installation Wizard



o create a WPS connection:

Step 1

PressandholdtheWPSbuttonforthreeseconds.TheblueWPSstatusLEDabovethebuttonwillblink.

Step 2

PresstheWPSbuttononyourrouterwithin60seconds.TheWPSbuttonisusuallyonthefrontorsideofyourrouter.Onsomerouters,youmayneedtologintothewebinterfaceandclickonanon-screenbuttontoactivatetheWPSfeature.IfyouarenotsurewheretheWPSbuttonisonyourrouter,pleaserefertoyourrouter’sUserManual.

The DCS-932L will automatically create a secure wireless connection to your router. While

connecting,thegreenLEDwilllashandyourcamerawillreboot.

WPS - Push Button Setup

WPS Button

�lternatively,youmaycreateasecurewirelessconnectionusingtheWPSButtononthebackofthecamera.


Section 3 - mydlink Portal

mydlink Portal�fterregisteringyourDCS-932LcamerawithamydlinkaccountintheCameraInstallationWizard.Youwillbeabletoremotelyaccessyourcamerafromthewww.mydlink.comwebsite.Aftersigningintoyourmydlinkaccount,youwillseeascreensimilartothefollowing:



Camera Status

fyourcameraisoline,trythefollowing:•ChecktomakesurethattheInternetconnectiontoyourcameraisworkingproperly.• TryrestartingyourInternetrouter.•Checkyourcamera’scableconnectionsandmakesuretheyaresecure.•ChecktomakesurethattheLEDonyourcameraislitsolidgreen.

Ifyoustillcannotaccessyourcamera, resetyourcameraandruntheCamera InstallationWizardagainfromtheCD-ROMincluded in your package.

Here,youcanseetheonlinestatusofeachofyourcameras.Youronlinestatusmaybeoneofthefollowing:

A green checkmark indicates that your camera is online and ready to use.

Ayellowexclamationpointindicatesthatyourcameraisonline,butthecamera password has changed. You will need to enter your new camera

password to access your camera again.

A redx indicates thatyour camera isolineandcurrently cannotbeaccessed remotely.



Live Video�nthemainpartofthescreen,theLiveVideotabwillbeselectedbydefault.Ifthecameraisavailable,aLiveVideofeedwillbedisplayed.VideowillbeshownatVGAresolution(640x480)ifviewingyourcamerafromaPConthesamelocalnetwork,oratQVGAresolution(320x240)ifviewingyourcamerafromaPConaremotenetwork.



Camera Settings�heCameraSettings taballowsyoutoaccessyourcamera’sconiguration interface.Toopenyourcamera’sconigurationinterface,clickCamera web pageandenterthepasswordexactlyaslistedontheCamera Settings page.



D�vice Name: The Device Name is a unique name that you can give to your device to help you identify it. Clicking on the Device Name will open awindowforyoutologintoyourcamera’sconigurationinterface.Then,it will open the Maintenance > Admin page where you can change your Device Name.

Camera Password: Displays the current password for your camera’s coniguration interface. Clicking on the Show Password checkboxwilleither show or hide the password. Clicking on the Password will open a windowforyoutologintoyourcamera’sconigurationinterface.Then,it will open the Maintenance > Admin page where you can change your Password.

mydlink No.: Displaysthemydlinknumberofyourdevice.

Model Name: Displays the model name of your device.

MAC Address: Displays the MAC address of your device.

Device activated On: Displays the time and date that your device was added to mydlink.

Support: Thissectionprovidesyouwithlinkstovarioussupportwebsitesand downloads related to your product.

Camera Info

�heCameraInfotabshowsyouvariousinformationaboutyourcamera.


Section 4 - Web Coniguration

WEB ConigurationUsing the WEB Coniguration Menu

�ftercompletingtheCameraInstallationWizard,youarereadytouseyourcamera.Thecamera’sbuilt-inWebconigurationutilityisdesignedtoallowyoutoeasilyaccessandconigureyourDCS-932L.Attheendofthewizard,clickGo To Camera,orentertheIPaddressofyourcameraintoawebbrowser,suchasInternetExplorer®.Tologin,usetheUsernameadmin and the password you created in the Installation Wizard. If you did notcreateapassword,thedefaultpasswordisblank.Afterenteringyourpassword,clickOK.

Note:IfyouaredirectlyconnectingyourPCtothecamera,orifyouareusingthecameraonaclosednetwork,thedefaultIPis192.168.0.20.



Function: Click the ActiveX or Java radiobutton to view live

video.

PleasemakesurethatyouhavethelatestversionofJavaapplicationinstalledonyourcomputertoensureproperoperationwhenviewingthevideoinJavamode.TheJavaapplicationcanbedownloadedatnocostfromSun’swebsite(http://www.java.com).

Whenyouconnecttothehomepageofyourcamera,youwillbepromptedtodownloadActiveX.IfyouwanttouseActiveXtoviewyourvideoimagesinsteadofJava,thenyoumustdownloadActiveX.



Live Video

ActiveX:

Java:

�or Windows®UsersthatdonothaveJavainstalled,pleasechoosethisoptiontoview video streaming on the Live Video page.

SelectJavawhenusingotherInternetbrowserssuchasSafari,FirefoxorChromethatsupportJavatoviewvideostreamingonthelivevideopage.

Setup

�oumaychoosetoconigureyournetworkbyusingtheInternet Connection Setup Wizard

thatincludesstep-by-stepinstructions.Otherwise,youmaymanuallyconigureyourconnectionusing the Manual Internet Connection Setup.

Note: This will not register to the my dlink service.

Wizard



Internet Connection Setup Wizard

Thiswizardwillguideyouthroughastep-by-stepprocesstoconigureyournewD-Link Camera and connect the camera to the Internet.

Click Next to continue.

• DHCP Connection(bydefault),whereyourDHCPserverwillautomaticallyassign dynamic IP to your device.

• Static IP Address allows you to manually enter your network settings for

the camera.

• PPPoE connection,whereyourcameraisdirectlyconnectedtotheInternetthrough a DSL modem.

Note: Input the DNS information if you have chosen and assigned a Static IP

Address for your camera.



Enter a name for your camera. Click Next to continue.

Conigure the correct time to ensure that all events triggered, captured andscheduled at the right time. Click Next to continue.

This page displays your conigured settings. Click Apply to save and activate the setting,orBack to change your settings.


If you have a Dynamic DNS account and would like the camera to update your IP

addressautomatically,enableDDNS and enter your host information.




Network Setup

Select this connection if you have a DHCP server running on your

networkandwouldlikeadynamicIPaddresstobeupdatedtoyourcamera automatically.

You may obtain a static or ixed IP address and other networkinformation from your network administrator for your camera. A static

IP address will ease you for accessing your camera in the future.

IP Address: TheixedIPaddressSubnet Mask: The default value is “255.255.255.0.” Used to determine

ifthedestinationisthesamesubnet.Default Gateway: The gateway used to forward frames to destinations

inadiferentsubnet.Invalidgatewaysettingsmaycausethefailureoftransmissionstoadiferentsubnet.Primary DNS: Primary domain name server that translates names to

IP addresses.

Secondary DNS: Secondary domain name server to backup thePrimary DNS.

DHCP:

Static IP Client:

PPPoE Settings:

Port Settings:

UPnP Settings:

�his section allows you to conigure your network settings.

IfyouareusingaPPPoEconnection,enableitandentertheUserNameandPasswordforyourPPPoEaccount.YoucangetthisinformationfromyourInternetserviceprovider(ISP).

YoumayconigureaSecondHTTPportthatwillallowyoutoconnecttothecameraviaastandardwebbrowser.TheportcanbesettoanumberotherthanthedefaultTCPports80.Acorrespondingportmustbeopenedontherouter.Forexample,iftheportischangedto1010,usersmusttypehttp://192.168.0.100:1010insteadofonly“http://192.168.0.100”.

EnablethissettingtoconigureyourcameraasanUPnPdeviceinthenetwork.



Wireless

ServiceSetIdentiier,anidentiierforyourwirelessnetwork.

Thedefaultsettingischannel6.Selectthesamechannelthatisbeingusedbyotherwirelessdeviceswithinyournetwork.Whenthereisaninterferencefromthewirelessnetworksthatoverlapwithoneanother,youmay change the channel to obtain maximum performance foryour connection.

Infrastructure is a wireless connection using an access point as

a transmission point of all wireless devices. Ad-Hoc is a wireless

connection used without an access point, where your DCS-932LisdirectlyconnectingtoyourPC.This isdoneusingtheon-boardwireless adapter on the DCS-932L connected to a wireless adapter

on the PC.

This page will allow you to select a wireless network that the DCS-932L

wasabletodetect.

Forsecurity,therearethreechoices;None,WEP,andWPA-PSK / WPA2-PSK.Selectthesameencryptionmethodthatisbeingusedbyyour wireless device/ router.

WEPprovidessecuritybyencryptingdataoveryourwirelessnetworksothatitisprotectedasitistransmittedfromonewirelessdevicetoanother.TogainaccesstoaWEPnetwork,youmustknowthekey.Thekeyisastringofcharactersthatyoucreate.WhenusingWEP,youmustdeterminethelevelofencryption.Thetypeofencryptiondeterminesthekeylength.128-bitencryptionrequiresalongerkeythan64-bitencryption.

An appropriate Pre-shared Key,whichisneededinordertoconnecttothewirelessnetwork.

SSID:

Channel:

Connection Mode:

Site Survey:

Wireless Security

Mode:

WEP:

WPA-PSK / WPA2PSK

Settings:

�his section allows you to setup and conigure the wireless settings on your camera.



(DynamicDomainNameServer)willholdaDNShostnameandsynchronizethepublicIPaddressofthemodemwhenithasbeenmodiied. The username and password are required when using the DDNS service.

ClicktoenabletheDDNSfunction.

Select your Dynamic DNS Server from the pull down menu.

Enter the host name of the DDNS server.

Enter your username or e-mail used to connect to the DDNS.

Enter your password used to connect to the DDNS server.

DDNS:

Enable:

Server Address:

Host Name:

User Name:

Password:

DDNS

�his section allows you to conigure the DDNS setting for your camera. DDNS will allow all users to access your camera using a domain name instead

of an IP address.



Image Setup

Selectthisboxtoenableantilicker.

Selectthisboxtoverticallylipthevideo.Ifthecameraisinstalledupsidedown,FlipImageandMirrorshouldbothbechecked.

Horizontallylipthevideo.

Allowsyoutoadjustthebrightnesslevel.

Allowsyoutoadjustthecontrastlevel.

Allowsyoutoadjustthesaturationlevel.

Enable Antilicker:

Flip Image:

Mirror:

Brightness Control:

Contrast Control:

Saturation Control:

�his section allows you to conigure the image settings for your camera.



Video

Video Proile:

Encode Type:

Resolution:

FPS:

JPEG Quality:

View Mode:

Light Frequency:

Video Coniguration

�his section allows you to conigure the video settings for your camera.

This section allows you to change the Encode Type,Resolution,FPS,andQuality.

The compression format used when viewing your camera.

Select the desired video resolution from three formats: 640x480, 320x240, and 160x120.The higher setting can obtain better quality.However,itwillusemoreresourcewithinyournetwork.

Selecttheoptimalsettingdependingonyournetworkstatus.Pleasenotethatthehighersettingcanobtainbetterquality.However,itwilluse more resources within your network.

Selectoneofivelevelsofimagequality:Highest,High,Medium,Low,andLowest.

Selectthemodeforviewingthecameraimage.SelectImageforastillimages,ActiveXforInternetExplorer,orJavaforotherwebbrowsers.

Selecttheproperfrequency(50Hzor60Hz)toreduceimagelicker.



Audio

�� audiosettingwillallowyouto listentoaudiofromthecamerathrough your PC’s audio output.

Note:Pleasewaitafewsecondsforthecameratoadjusttheaudioafterthesettinghasbeenselected.

Audio Settings:

Volume Settings:

You may Enable or Disable the camera audio feed.

Select the desired volume percentage level.



Motion Detect

!nablingVideoMotionwill allowyourcamera touse themotiondetectionfeature.Youmaydrawainitemotionareathatwillbeusedformonitoring.

Motion

Detection:

Sensitivity:

Detection Areas:

Select this box to enable themotion detection feature of yourcamera.

Speciies the measurable diference between two sequentialimagesthatwouldindicatemotion.Pleaseenteravaluebetween0 and 100.

Use your mouse to click on the blocks that youwould like tomonitor for motion.



Mail

SMTP Server

Address:

Sender e-mail

Address:

Receiver e-mail

Address:

User Name:

Password:

ThisisthedomainnameorIPaddressofyourexternale-mailserver.

This is the e-mail address of the person sending the camera snapshots.

This is the e-mail address of the recipient.

If the SMTP server uses authentication, you must enter your username here.

This is the password that corresponds to your user name to connect

to the SMTP server.

"his section allows you to conigure the email notiication settings for your camera.

Forexample,ifyouwanttouseGmailbySSL-TLSforthee-mailnotiication,youcanfollowthesetupprocedureasbelow:

Step 1 - Enter “smtp.gmail.com” in SMTP Server Address.

Step 2-ChangetheSMTPserverportnumberfrom25to465.

Step 3 - Enter your gmail E-mail address in Sender E-mail Address.

Step 4 - Enter the destination E-mail address in Receiver E-mail Address.

Step 5 - Enter the user name required to access the SMTP server.

Step 6 - Enter the password required to access the SMTP server.

Step 7 - Select SSL-TLS and then click Save Settings.

Step 8 - Click the Testbuttontosendateste-mailwillbesenttothee-mailaccountlistedabove. Note:YoucanalsouseSTARTTLSwhichwilluseSMTPserverportnumber587.

Note:IfyouwanttousetheYahooSMTPserver,theSMTPserveraddresswillbediferentbetweeneachregisteredregion.AnditonlysupportstheSMTPserverportnumber465 for the SSL-TLS.



Time Schedule

Enable e-mail image

to e-mail account:

Interval:

Test E-mail

Account:

Choosing Always will start sending snapshots to the recipient’s e-mail account right away. Choosing Schedule will allow you to

schedule when to start and stop the sending of snapshots to the recipient’s e-mail account.

Select Motion Detection if you would like the camera to send images to the recipient’s e-mail account when the motions are detected.

Thefrequencyofthesnapshotintervalcanalsobeconiguredfrom1to65535seconds.

This will send a snapshot to the e-mail account that you have conigured in the E-mail section. If you have conigured the SMTP account

correctly,youwillbeabletosendatestiletothee-mailaccountoftherecipient.



FTP

Host Address:

Port Number:

User Name:

Password:

Directory Path:

Passive Mode:

ThisistheIPaddressoftheFTPserverthatyouwillbeconnectingto.

Defaultisport21.Ifchanged,externalFTPclientprogrammustchangethe server connection port accordingly.

SpeciiestheusernametoaccesstheexternalFTPserver.Ifyouaretoupload snapshots to an FTP server you will need to ill in the Domain

name or IP address of your external FTP server. The following usersettingsmustbecorrectlyconiguredforremoteaccess.

SpeciiesthepasswordtoaccesstheexternalFTPserver.

SpeciiesthedestinationfolderintheexternalFTPserver.

EnablingpassivemodewillallowaccesstoanexternalFTPserverifyourcameraisbehindarouterprotectedbyairewall.

#his section allows you to conigure a FTP server to receive images from the camera.



Time Schedule

Enable upload image to

FTP server:

Always:

Schedule:

Image Frequency:

Base File Name:

File:

Test FTP Server:

CheckingthisboxwillenablevideouploadstotheFTPserveryouhaveselected.

SelectingthisoptionallowssnapshotstobeuploadedtoyourFTPassoonasyouclickApply.

SelectingthisoptionallowsyoutoconigurespeciictimeswhenyouwantthesnapshotstobeuploadedtoyourFTPserver.

Userscanselectinframespersecond(1,2,3orauto,inautothiscouldgoto4).Theusercanalsoselectadurationforeachframefrom 1 to 65535 seconds.

Thiswillbe thenamethatprecedes the time, forexampleDCS9302010072116425101.jpg.Thismeans that thecamera tookasnapshotintheyear2010,July21at16thhour(4o’clock),42minutesand51secondsanditispicturenumberone.

Select Overwriteandtherewillbeonlyoneimagesthatareconstantlyrefreshed.SelectDate/Time Suixandthepictureswillbenamedwithadateandtime(mayrefertoBase File Name).EnabletheCreate subfolder function,thesystemwillautocreatethesubfolderby0.5 hour, 1 hour or 1 day.AnexampleofthiscanbeseenaboveundertheBase ile name category. Select Sequence

Number Suix up to 1024andallthepictureswillbenumberedfrom1-1024.Thetotalamountofpicturescanbeconiguredupto 1024 pictures.

This will send a snapshot to the FTP server that you have conigured in the Uploadsection.IfyouhaveconiguredtheFTPcorrectly,youwillbeabletoseeatestileonyourFTPserver.



Time and Date

Time Zone:

Synchronize NTP Server:

Copy your Computer’s

Time Settings:

Set the Date and Time

Manually:

Select the time zone for your region from the drop

down menu.

Network Time Protocol will synchronize your

camera with an Internet time server. Choose the

one that is closest to your camera.

Click to synchronize the time information from

your PC.

Select this to set the time manually.

$his section allows you to conigure the settings of the internal system

clocks for your camera.



Day/Night Mode

%his section allows you to conigure the settings of Day/Night mode switch method. Day/Night mode feature provides good video illumination in

bothdayandnightenvironments.

Auto:

Manual:

Always Day Mode:

Always Night Mode:

Day Mode Schedule:

Camera automatically switches Day/Night mode. The camera

normally works on Day mode. It automatically changes to Night

mode in a dark place.

User can manually control the camera work in Day or Night

mode at the LIVE VIDEO page.

The camera always works in the Day mode.

The camera always works in the Night mode.

The camera works on Day mode for the times that you have

conigured in the schedule. The camera changes to Night mode

during other time periods.



Maintenance

&his section allows you to change the administrator’s password and conigure the server settings for your camera. You can also manage the user

account(s)thataccesstoyourcamera.

Camera Name:

LED Control:

User Access Control:

Snapshot URL

Authentication:

Add User Account:

User List:

Specify a name for your camera

Select Normal to enable the LED on the front of thedevice,orselectoftodisabletheLED.

Select Enable to enable user access control or Disableto allow only the administrator account to access the

camera.

Select Enable to allow access to the current camera

snapshotviathewebaddressindicated.

Create new user for accessing the video image. Enter the

user name, password, and password conirmation, andclick Add.Amaximumof8useraccountscanbeaddedinto the user list.

Displays the account names of authorized users.

Admin



System

'hissectionallowsyoutosaveandrestoreyourconiguration,restorethefactorysettings,and/orrestartthecamera.



Firmware Upgrade

(ourcurrentirmwareversionanddatewillbedisplayedonyourscreen. You may go to the D-Link Support Page to check for the latest

irmwareversionsavailable.

ToupgradetheirmwareonyourDCS-932L,pleasedownloadandsave the latest irmware version from the D-Link Support Page to your

localharddrive.LocatetheileonyourlocalharddrivebyusingtheBrowsebutton.Then,clickthe“Upload”buttontostarttheirmwareupgrade.



Device Info

)hissectiondisplaysallthedetailedinformationaboutyourdeviceand network settings.



Active User

*his page lists all the active user’s information including the User

Name,IPaddress,andthetimethatcameraaccessbegan.


Section 5 - Security

Wireless Security

+his section will show you the diferent levels of security you can use to protect your data from intruders.

TheDCS-932Lofersthefollowingtypesofsecurity:

•WPA2-PSK(Pre-SharedKey)

•WEP(WiredEquivalentPrivacy)

What is WEP?

,-.standsforWiredEquivalentPrivacy.ItisbasedontheIEEE802.11standardandusestheRC4encryptionalgorithm.WEPprovidessecuritybyencrypting data over your wireless network so that it is protected as it is transmitted from one wireless device to another.

TogainaccesstoaWEPnetwork,youmustknowthekey.Thekeyisastringofcharactersthatyoucreate.WhenusingWEP,youmustdeterminethelevelofencryption.Thetypeofencryptiondeterminesthekeylength.128-bitencryptionrequiresalongerkeythan64-bitencryption.KeysaredeinedbyenteringinastringinHEX(hexadecimal-usingcharacters0-9,A-F)orASCII(AmericanStandardCodeforInformationInterchange–alphanumericcharacters)format.ASCIIformatisprovidedsoyoucanenterastringthatiseasiertoremember.TheASCIIstringisconvertedtoHEXforuseoverthenetwork.Fourkeyscanbedeinedsothatyoucanchangekeyseasily.



What is WPA?

/0A,orWi-FiProtectedAccess,isaWi-FistandardthatwasdesignedtoimprovethesecurityfeaturesofWEP(WiredEquivalentPrivacy).

The2majorimprovementsoverWEP:

ImproveddataencryptionthroughtheTemporalKeyIntegrityProtocol(TKIP).TKIPscramblesthekeysusingahashingalgorithmand,byaddinganintegrity-checkingfeature,ensuresthatthekeyshaven’tbeentamperedwith.WPA2isbasedon802.11iandusesAdvancedEncryptionStandardinsteadofTKIP.

Userauthentication,whichisgenerallymissinginWEP,throughtheextensibleauthenticationprotocol(EAP).WEPregulatesaccesstoawirelessnetworkbasedonacomputer’shardware-speciicMACaddress,whichisrelativelysimpletobesnifedoutandstolen.EAPisbuiltonamoresecurepublic-keyencryptionsystemtoensurethatonlyauthorizednetworkuserscanaccessthenetwork.

WPA-PSK/WPA2-PSKusesapassphraseorkeytoauthenticateyourwirelessconnection.Thekeyisanalpha-numericpasswordbetween8and63characterslong.Thepasswordcanincludesymbols(!?*&_)andspaces.Thiskeymustbetheexactsamekeyenteredonyourwirelessrouteroraccess point.



1-Link’sDCS-932L isaversatileandcostefectiveNetworkCameraoferingbothvideoandaudiomonitoring. Itcanalsoserveasapowerfulsurveillancesysteminsecurityapplications.TheDCS-932Lcanbeusedwithanywiredor802.11n/gwirelessrouter.Thissectionexplainshowtoview the camera from either the Internet or from inside your internal network.

ComponentsNeeded:

•1DCS-932LNetworkCamera

•1EthernetCable

•AWiredorWirelessroutersuchastheD-LinkDIR-655WirelessRouter

•EthernetbasedPCforsystemconiguration

Setting up the DCS-932L for Use Behind a Router

InstallingaDCS-932LNetworkCameraonyournetworkisaneasy4–stepprocedure:

1. Assign a local IP address to your network camera.

2.ViewthenetworkcamerausingyourInternetExplorerwebbrowser.

3.Accesstherouterwithyourwebbrowser.

4.Openvirtualserverportstoenableremoteimageviewing.

Note: These are manual steps; however, if you decide to use the wizard, it will perform every step automatically.

Thissectionisdesignedtowalkyouthroughthesetupprocessforinstallingyourcamerabehindarouterandenableremotevideoviewing.ForthebasicsetupoftheDCS-932L,followthestepsoutlinedintheQuickInstallationGuide.

AfteryouhavecompletedthesetupoftheDCS-932LoutlinedintheQuickInstallationGuideyouwillhaveanoperatingcamerathathasanassignedIPAddress.BecauseyouareusingaroutertosharetheInternetwithoneormorePCs,theIPAddressassignedtotheNetworkCamerawillbealocalIPAddress.ThisallowsviewingwithinyourLocalAreaNetwork(LAN)untiltherouterisconiguredtoallowremoteviewingofthecameraover the Internet.

Coniguring the DCS-932L with a Router



23 4ssign a Local IP Address to Your Camera

RunthesetupwizardfromtheCDincludedwiththeDCS-932L.FollowthestepsintheQuickInstallationGuidetoconiguretheDCS-932L.ThecamerawillbeassignedalocalIPAddressthatallowsittoberecognizedbytherouter.WritedownthisIPAddressforfuturereference.

RunyourInternetExplorerWebbrowser.Intheaddressbar,typeintheIPAddressthatwasassignedtotheNetworkCamerabytheDCCprogram.TheDCS-932LLiveVideoPageappearswithawindowdisplayinglivevideofromthecamera.YouareabletoviewthisscreenfromanyPCrunningInternetExploreronyourLAN.

Click on the Setupbuttonontheleftsideofthedisplay.ScrolltothebottomoftheNetworkSetuppagetodisplaytheportsusedbyHTTPandStreaming audio and video.

2. View the Network Camera Using Your Internet Explorer Web Browser



5he Setup > Network Setuppagedisplaystheportsettingsforyourcamera.Ifnecessary,theseportscanbechangediftheyarealreadyinusebyotherdevices(e.g.inamultiplecameraenvironment).

Note:TheHTTPportisrequiredtobeopenedfortheDCS-932L.



6hefollowingstepsgenerallyapplytoanyrouterthatyouhaveonyournetwork.TheD-LinkDIR-655isusedasanexampletoclarifytheconigurationprocess.ConiguretheinitialsettingsoftheDIR-655byfollowingthestepsoutlinedintheDIR-655QuickInstallationGuide.

3. Access the Router with Your Web Browser

IfyouhavecableorDSLInternetservice,youwillmostlikelyhaveadynamicallyassignedWAN IP Address. ‘Dynamic’ means that your router’s WAN IP address can change from

time to time depending on your ISP. A dynamic WAN IP Address identiies your router

on thepublicnetworkandallows it toaccess the Internet. Toindoutwhatyourrouter’sWANIPAddressis,gototheStatusmenuonyourrouterandlocatetheWANinformationforyourrouter(asshownonthenextpage).TheWANIPAddresswillbelisted.ThiswillbetheaddressthatyouwillneedtotypeinyourWebbrowsertoviewyour camera over the Internet.

Router Set-Up and Installation

YourWANIPAddresswillbelistedontherouter’s

Status > Device Info page.



N78e:BecauseadynamicWANIPcanchangefromtimetotimedependingonyourISP,youmaywanttoobtainaStaticIPaddressfromyourISP.AStaticIPaddressisaixedIPaddressthatwillnotchangeovertimeandwillbemoreconvenientforyoutousetoaccessyourcamerafromaremotelocation. The Static IP Address will also allow you to access your camera attached to your router over the Internet.

4. Open Virtual Server Ports to Enable Remote Image Viewing

TheirewallsecurityfeaturesbuiltintotheDIR-655routerpreventusersfromaccessingthevideofromtheDCS-932LovertheInternet.TherouterconnectstotheInternetoveraseriesofnumberedports.TheportsnormallyusedbytheDCS-932LareblockedfromaccessovertheInternet.Therefore,theseportsneedtobemadeaccessibleovertheInternet.ThisisaccomplishedusingtheVirtualServerfunctionontheDIR-655router.TheVirtualServerportsusedbythecameramustbeopenedthroughtherouterforremoteaccesstoyourcamera.VirtualServerisaccessedbyclicking on the Advancedtaboftherouterscreen.

1. Click Enabled.

2. Enter a diferent name for each entry.

3.Enteryourcamera’slocalIPAddress(e.g.,192.168.0.120)inthePrivateIPield.

4.SelectTCPforHTTPport,andTCPfor5556-5559ports.

5.Ifyouareusingthedefaultcameraportsettings,enter80intothePublicandPrivatePortsection,clickApply.

6.SchedulingshouldbesettoAlwayssothatthecameraimagescanbeaccessedatanytime.

Followthesestepstoconigureyourrouter’sVirtualServersettings:



9:;ortant: Some ISPs block access to port 80 and other commonly used Internet ports to conserve bandwidth. Check with your ISP so that you can open

the appropriate ports accordingly. If your ISP does not pass traic on port 80, you will need to change the port the camera uses from 80 to something else,

such as 800. Not all routers are the same, so refer to your user manual for speciic instructions on how to open ports.

EntervalidportsintheVirtualServersectionofyourrouter.PleasemakesuretochecktheboxnexttothecameranameontheVirtualServerListtoenableyoursettings.


Section 6 - Troubleshooting

Troubleshooting<hischapterprovidessolutionstoproblemsthatcanoccurduringtheinstallationandoperationoftheDCS-932L.

Readthefollowingdescriptionsifyouarehavingproblems.(TheexamplesbelowareillustratedinWindowsVista®andXP.Ifyouhaveadiferentoperatingsystem,thescreenshotsonyourcomputerwilllooksimilartothefollowingexamples.)

1. What is Remote Access? How do I enable it?

RemoteAccessallowsyoutoaccessyourcamerafromanyPCconnectedtotheInternetthroughawebbrowser.Thisletsyouviewyourcamerafeed and manage your camera’s settings when you’re away from home.

ToenableRemoteAccess,simplygothroughtheCameraInstallationWizardincludedontheInstallationCDthatcameinyourpackage.Youcanalsodownloadthewizardfromthefollowingwebsites:

DCS-932L:http://DCS-932L.mydlink.com

Aftergoingthroughthewizard,youshouldseeRemoteStatus:Enabledonthesummarypage.

IfyouseeRemoteStatus:Disabled,makesurethat:

...the front LED on your camera is lit solid green

...your Internet connection is working

...yourrouter’sLAN&WANconnectionsareworkingproperly

...yourrouterhasUPnPenabled(ifyourrouterdoesnotsupportUPnP,pleaserefertoAppendixA)

...yourroutercangetapublicIP

...your router is upgraded to the latest irmware

...youhavetriedrebootingyourrouterbyunpluggingit,thenpluggingitbackin

Aftercheckingtheaboveitems,youcanclicktheRetrybuttontorefreshthesummaryscreentoseeifRemoteAccesshasbeenenabled.

2. What can I do if I forget my password?

Ifyouforgetyourpassword,youwillneedtoperformahardresetofyourcamera.Thisprocesswillchangeallyoursettingsbacktothefactorydefaults.

Toresetyourcamera,pleaseuseanunfoldedpapercliptopressandholdtheRESETbuttonforatleast3secondswhileyourcameraispluggedin.

3. In addition to using mydlink.com, is there another way to access my camera remotely over the Internet?



=es,youcanaccessyourcameraovertheInternetthroughthefollowingURLaftersuccessfullyinstallingyourcamerathroughtheCameraInstallationWizard:

http://[mydlinkNo.].mydlink.com

Forexample,ifyourcamera’smydlinkNo.was12345678,youwouldbeabletoaccessyourcameraremotelybyopeningyourwebbrowserandgoingtohttp://12345678.mydlink.com

ThisURLwillopenawebpagewhereyouwillbeaskedtologinbyenteringyourcamera’spassword.Afterenteringyourpassword,yourcamera’sLiveViewwindowwillopen,andyouwillbeabletoconigureyourcameraaswell.

4. Why does the LED not light up?

Thepowersupplymightbefaulty.ConirmthatyouareusingtheprovidedDC5Vpowersupplyforthisnetworkcamera.Verifythatthepowersupplyiscorrectlyconnected.Ifthecameraisfunctioningnormally,theLEDmayhavebeendisabled.Seepage37forinformationabouthowtoenabletheLED.

5. Why is the camera’s network connection unreliable?

Theremightbeaproblemwiththenetworkcable.Toconirmthatthecablesareworking,PINGtheaddressofaknowndeviceonthenetwork.IfthecablingisOKandyournetworkisreachable,youshouldreceiveareplysimilartothefollowing(…bytes=32time=2ms).

AnotherpossibleproblemmaybethatthenetworkdevicesuchasahuborswitchutilizedbytheNetworkCameraisnotfunctioningproperly.Please conirm the power for the devices are well connected and functioning properly.

6. Why does the Network Camera work locally but not remotely?

Thismightbecausedbytheirewallprotection.ChecktheInternetirewallwithyoursystemadministrator.TheirewallmayneedtohavesomesettingschangedinorderfortheNetworkCameratobeaccessibleoutsideyourlocalLAN.Formoreinformation,pleaserefertothesectionaboutinstallingyourcamerabehindarouter.

MakesurethattheNetworkCameraisn’tconlictingwithanyWebserveryoumayhaverunningonyournetwork.

Thedefaultroutersettingmightbeapossiblereason.CheckthattheconigurationoftheroutersettingsallowtheNetworkCameratobeaccessedoutside your local LAN.



>?Why does a series of broad vertical white lines appear through out the image?

ItcouldbethattheCMOSsensor(asquarepanelsituatedbehindthelensthatmeasuresthelightsignalsandchangesitintoadigitalformatsoyourcomputercanpresentitintoanimagethatyouarefamiliarwith)hasbecomeoverloadedwhenithasbeenexposedtobrightlightssuchasdirectexposuretosunlightorhalogenlights.RepositiontheNetworkCameraintoamoreshadedareaimmediatelyasprolongedexposuretobrightlightswilldamagetheCMOSsensor.

8. The camera is producing noisy images. How can I solve the problem?

ThevideoimagesmightbenoisyiftheNetworkCameraisusedinaverylowlightenvironment.

9. The images are poor quality, how can I improve the image quality?

Makesurethatyourcomputer’sdisplaypropertiesaresettoatleast6-bitcolor.Using16or256colorsonyourcomputerwillproduceditheringartifactsintheimage,makingtheimagelookasifitisofpoorquality.

TheconigurationontheNetworkCameraimagedisplayisincorrect.TheWebConigurationVideosectionoftheWebmanagementallowsyoutoadjusttherelated-parametersforimprovedimagessuchas:brightness,contrast,hueandlightfrequency.PleaserefertotheWebConigurationsection for detailed information.

10. Why are no images available through the Web browser?

ActiveXmightbedisabled.IfyouareviewingtheimagesfromInternetExplorermakesureActiveXhasbeenenabledintheInternetOptionsmenu.YoumayalsoneedtochangethesecuritysettingsonyourbrowsertoallowtheActiveXplug-intobeinstalled.

IfyouareusingInternetExplorerwithaversionnumberlowerthan6,thenyouwillneedtoupgradeyourWebbrowsersoftwareinordertoviewthestreamingvideotransmittedbytheNetworkCamera.


Wireless Basics

@-Linkwirelessproductsarebasedonindustrystandardstoprovideeasy-to-useandcompatiblehigh-speedwireless*connectivitywithinyourhome,businessorpublicaccesswirelessnetworks.StrictlyadheringtotheIEEEstandard,theD-Linkwirelessfamilyofproductswillallowyoutosecurelyaccessthedatayouwant,whenandwhereyouwantit.Youwillbeabletoenjoythefreedomthatwirelessnetworkingdelivers.

Awirelesslocalareanetwork(WLAN)isacellularcomputernetworkthattransmitsandreceivesdatawithradiosignalsinsteadofwires.WirelessLANsareusedincreasinglyinbothhomeandoiceenvironments,andpublicareassuchasairports,cofeeshopsanduniversities.InnovativewaystoutilizeWLANtechnologyarehelpingpeopletoworkandcommunicatemoreeiciently.Increasedmobilityandtheabsenceofcablingandotherixedinfrastructurehaveproventobebeneicialformanyusers.

Undermanycircumstances,itmaybedesirableformobilenetworkdevicestolinktoaconventionalEthernetLANinordertouseservers,printersor an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link.

Wireless Basics


Wireless Basics

What is Wireless?

Wireless or WiFi technology is another way of connecting your computer to the network without using wires. WiFi uses radio frequency

toconnectwirelessly,soyouhavethefreedomtoconnectcomputersanywhereinyourhomeoroicenetwork.

Why D-Link Wireless?

D-Linkistheworldwideleaderandawardwinningdesigner,developer,andmanufacturerofnetworkingproducts.D-Linkdeliverstheperformanceyouneedatapriceyoucanaford.D-Linkhasalltheproductsyouneedtobuildyournetwork.

How does wireless work?

WirelessworkssimilartohowcordlessphonesworkthroughradiosignalstotransmitdatafromonepointAtopointB.But,wirelesstechnologyhasrestrictionsastohowyoucanaccessthenetwork.Youmustbewithinthewirelessnetworkrangeareatobeabletoconnectyourcomputer.TherearetwodiferenttypesofwirelessnetworksWirelessLocalAreaNetwork(WLAN),andWirelessPersonalAreaNetwork(WPAN).

Wireless Local Area Network (WLAN)

Inawirelesslocalareanetwork,adevicecalledanAccessPoint(AP)connectscomputerstothenetwork.Theaccesspointhasasmallantennaattachedtoit,whichallowsittotransmitdatabackandforthoverradiosignals.Withanindooraccesspointasseeninthepicture,thesignalcantravelupto300feet.Withanoutdooraccesspointthesignalcanreachoutupto30milestoserveplaceslikemanufacturingplants,industriallocations,collegeandhighschoolcampuses,airports,golfcourses,andmanyotheroutdoorvenues.


Wireless Basics

Who uses wireless?

Airelesstechnologyasbecomesopopularinrecentyearsthatalmosteveryoneisusingit,whetherit’sforhome,oice,business,D-Linkhasawireless solution for it.

Home

•Giveseveryoneathomebroadbandaccess

•SurftheWeb,checkemail,instantmessage,andetc

•Getsridofthecablesaroundthehouse

•Simpleandeasytouse

Small Oice and Home Oice

•Stayontopofeverythingathomeasyouwouldatoice

•Remotelyaccessyouroicenetworkfromhome

•ShareInternetconnectionandprinterwithmultiplecomputers

•Noneedtodedicateoicespace


Wireless Basics

Where is wireless used?

Birelesstechnologyisexpandingeverywherenotjustathomeoroice.Peoplelikethefreedomofmobilityandit’sbecomingsopopularthatmoreandmorepublicfacilitiesnowprovidewirelessaccesstoattractpeople.Thewirelessconnectioninpublicplacesisusuallycalled“hotspots”.

UsingaD-LinkCardbusAdapterwithyourlaptop,youcanaccessthehotspottoconnecttoInternetfromremotelocationslike:Airports,Hotels,CofeeShops,Libraries,Restaurants,andConventionCenters.

Wirelessnetworkiseasytosetup,butifyou’reinstallingitfortheirsttimeitcouldbequiteatasknotknowingwheretostart.That’swhywe’veputtogether a few setup steps and tips to help you through the process of setting up a wireless network.

Tips

EGHeareafewthingstokeepinmind,whenyouinstallawirelessnetwork.

Centralize your router or Access Point

Jakesureyouplacetherouter/accesspointinacentralizedlocationwithinyournetworkforthebestperformance.Trytoplacetherouter/accesspointashighaspossibleintheroom,sothesignalgetsdispersedthroughoutyourhome.Ifyouhaveatwo-storyhome,youmayneedarepeatertoboostthesignaltoextendtherange.

Eliminate Interference

Klacehomeappliancessuchascordlesstelephones,microwaves,andtelevisionsasawayaspossiblefromtherouter/accesspoint.Thiswouldsigniicantly reduce any interfere that the appliances might cause since they operate on same frequency.

Security

Mon’tletyounext-doorneighborsorintrudersconnecttoyourwirelessnetwork.SecureyourwirelessnetworkbyturningontheWPAorWEPsecurity feature on the router. Refer to product manual for detail information on how to set it up.


Wireless Basics

Therearebasicallytwomodesofnetworking:

• Infrastructure – All wireless clients will connect to an access point or wireless router.

• Ad-Hoc–Directlyconnectingtoanothercomputer,forpeer-to-peercommunication,usingwirelessnetworkadaptersoneachcomputer,suchastwoormoreDCS-932LwirelessnetworkCardbusadapters.

AnInfrastructurenetworkcontainsanAccessPointorwirelessrouter.Allthewirelessdevices,orclients,willconnecttothewirelessrouteroraccess point.

AnAd-Hocnetworkcontainsonlyclients,suchaslaptopswithwirelesscardbusadapters.AlltheadaptersmustbeinAd-Hocmodetocommunicate.

Wireless Modes


Networking Basics

Networking Basics

Check your IP address

OfteryouinstallyournewD-Linkadapter,bydefault,theTCP/IPsettingsshouldbesettoobtainanIPaddressfromaDHCPserver(i.e.wirelessrouter)automatically.ToverifyyourIPaddress,pleasefollowthestepsbelow.

Click on Start > Run.Intherunboxtypecmd and click OK.

Attheprompt,typeipconig and press Enter.

ThiswilldisplaytheIPaddress,subnetmask,andthedefaultgateway of your adapter.

Iftheaddressis0.0.0.0,checkyouradapterinstallation,securitysettings,andthesettingsonyourrouter.SomeirewallsoftwareprogramsmayblockaDHCPrequestonnewlyinstalledadapters.

Ifyouareconnectingtoawirelessnetworkatahotspot(e.g.hotel, cofee shop, airport),please contact anemployeeoradministrator to verify their wireless network settings.


Networking Basics

Statically Assign an IP Address

PfyouarenotusingaDHCPcapablegateway/router,oryouneedtoassignastaticIPaddress,pleasefollowthestepsbelow:

Step 1

Windows® Vista - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.

WindowsXP-ClickonStart > Control Panel > Network Connections.

Step 2

Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.

Step 3

Highlight Internet Protocol (TCP/IP) and click Properties.

Step 4

Click Use the following IP addressandenteranIPaddressthatisonthesamesubnetasyournetworkorthe LAN IP address on your router.

Example: Iftherouter´sLANIPaddressis192.168.0.1,makeyourIPaddress192.168.0.XwhereXisanumberbetween2and99.Makesurethatthenumberyouchooseisnotinuseonthenetwork.SetDefaultGatewaythesameastheLANIPaddressofyourrouter(192.168.0.1).

SetPrimaryDNSthesameastheLANIPaddressofyourrouter(192.168.0.1).TheSecondaryDNSisnotneeded or you may enter a DNS server from your ISP.

Step 5

Click OK twice to save your settings.


Technical Speciications

Technical SpeciicationsQystem Requirements

• OperatingSystem:MicrosoftWindowsXP,Vista,Windows7• InternetExplorer6orabove,Firefox3.5orabove,Safari4

Networking Protocol

• IPV4,ARP,TCP,UDP,ICMP• DHCP Client

• NTPClient(D-Link)• DNS Client

• DDNSClient(DyndnsandD-Link)• SMTP Client

• FTP Client

• HTTP Server

• PPPoE

• UPnP Port Forwarding

Built-In Protocol

• 10/100BASE-TXFastEthernet• 802.11b/g/nWLAN

Wireless Connectivity

• 802.11b/g/nWirelesswithWEP/WPA/WPA2security• WPS

Wireless Transmit Output Power

• 16dbmfor11b,12dbmfor11g, 12dbmfor11n(typical)

SDRAM

• 32 MB

Flash Memory

• 4 MB

Reset Button

• Reset to factory default

Video Codecs

• MJPEG• JPEGforstillimages

Video Features

• Adjustableimagesizeandquality• Timestampandtextoverlay• Flip and Mirror

Resolution

• 640x480atupto20fps• 320x240atupto30fps• 160x120atupto30fps

Lens

• Focallength:5.01mm,F2.8

Sensor

• VGA1/5inchCMOSSensor

IR LED

• 5 Meter Illumination Distance with 4 LEDS and Light Sensor

Minimum Illumination

• Color:[email protected](Day)• B/W:[email protected](Night)

View Angle

• Horizontal:45.3°• Vertical:34.5°• Diagonal:54.9°


Technical Speciications

Rigital Zoom

• Upto4x

3A Control

• AGC(AutoGainControl)• AWB(AutoWhiteBalance)• AES(AutoElectronicShutter)

Power

• Input:100-240VAC,50/60Hz• Output:5VDC,1.2A• ExternalAC-to-DCswitchingpoweradapter

Dimensions (W x D x H)

• Includingthebracketandstand: 65.8x65x126mm

• Cameraonly: 27.2x60x96mm

Weight

• 76.9g(withoutbracketandstand)

Max Power Consumption

• 2 W

Operation Temperature

• 0˚Cto40˚C(32˚Fto104˚F)

Storage Temperature

• -20˚Cto70˚C(-4˚Fto158˚F)

Humidity

• 20-80% RH non-condensing

Emission (EMI), Safety & Other Certiications

• FCC Class B

• IC

• C-Tick

• CE

user manualg-ec2.images-amazon.com/images/g/01/hardlines/usermanual/... · 2015. 2. 23. · d-link...

Documents