user manual - twister stop - kemp elektroniks · be reduced via informing the current. therefore a...

User Manual - Twister Stop- Research Results - Metrological Results - Applications

© 2008 Reproduction, also in parts, only with consent of the author.

Twister Stop - - Twister Stop - Page 3 -

Preface

Within the hi-fi range there are unexplainable phenomena, which are interpreted with established theoretical knowledge. These attempts at explanations, which are based on school physics, polarize music lovers in skeptics and proponents. Also our Twister Stop will polarize, since with common knowledge their functionality cannot be explained. The creaktiv research was looking for new insights and found these besides own research in the theoretical works of the field physicist and turbulence specialist Dr. Ing. K. Meyl. Also the results of the Gabriel Tech research group with regard to the impacts of electric smog on the human body and the brain brought new results. Based on this the psycho-acoustic working hypothesis of active hearing could be fundamentally revised. Today we know that electromagnetic structures, as the potential turbulences discovered by Prof. Dr. K. Meyl and Tesla’s longitudinal electromagnetic waves, can influence the brain activity so much that the hearing sensation in our with electric smog highly polluted environment is gravely affected. We worked out that these biological and hearing-relevant electrical field structures originate at field interferences, such as electric appliances, magnets and glass plates as well as underfloor heating systems. It was our challenge to dissolve and dispose of these for biology and sound relevant structures. For this the ci2p technology, which creates a natural perception environment, was developed by creaktive Systems during the past five years. The basics of this revolutionary ci2p technology were published by creaktive Systems in the brochure “New Physics” (download at http://www.4-steps-ahead.de).

Your creaktiv Systems Team

CONTENTS

Page 3 1st Part: Introduction and Research Results of creaktiv Systems Research

Page 4 - 9 2nd Part: Practical Applications

Norbert Maurer Research & Development

Arno SelkerManaging Director

Twister Stop - Page 2 - Twister Stop - -

1st Part: Introduction and Research Results

IntroductionA listening room can possibly contain numerous disturbing elements, which create harmful, electrical sound turbulences. Here the most important guideline is: “Rather screen all interference sources a bit than one interference source not at all”.

Research ResultsThe practical measurement results of the creaktiv Systems research and the measurements of our technology partners Gabriel Tech within the bioengineering area show locally limited, electromagnetic interferences, which are presumably due to turbulence formation of electromagnetic waves. These metrological conclusive phenomena, unknown to textbook physics, can be clearly explained and forecast with the theories of the German turbulence physicist Professor Dr. Konstantin Meyl. In this way we not only discovered the electromagnetic turbulences by systematic application of these turbulence theories of Professor Dr. Konstantin Meyl, but we could also prove the connection between turbulences and hearing.

Information Dissolves TurbulencesThe applied proprietary creaktiv Systems technologies and the information technology of our technology partner Gabriel Tech are able to prevent these harmful turbulences already during formation, to dissolve developed turbulences, to reverse the lasting effects of these turbulence structures to conductors and nonconductors (removal of the electrical material stress) and to eliminate the hearing disturbance to the human hearing system. By disintegrating the turbulences the energy, which was locally focused in the turbulence, can now flow off via the wave and no longer affects the functionality of devices and the listening ability of people (compare Fig. 1 and 2).

E [V/m]

1 2 3 4 5 6 7 8 9

4,99 5,12 5,95 1,24 1,72 2,38 2,33 3,85 3,88

X 1,28 1,35 1,77 0,39 1,05 1,95 1,76 3,36 3,39

Y 3,01 3,21 0,97 1,12 1,12 0,80 1,49 1,85 1,86

Z 3,77 3,75 5,60 0,35 0,78 1,11 0,35 0,31 0,29

Measuring points

Alternative

V/m <1 10 40 100

y

E [V/m]

1 2 3 4 5 6 7 8 9

0,11 0,07 0,08 0,04 0,06 0,05 0,04 0,05 0,06

X 0,08 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00

Y 0,07 0,06 0,04 0,04 0,06 0,04 0,04 0,04 0,06

Z 0,03 0,04 0,07 0,01 0,03 0,03 0,01 0,03 0,01

Measuring points

Alternative

V/m <1 10 40 100

y

Fig. 2: Dielectric field interference at glass plates without turbulences (informed). Measurement under same conditions, however after the glass was informed and activated by the creaktiv Systems Twister Stop lenses. The total interference was reduced from 1.24 V/m to 0.04 V/m. The Twister Stop lenses even partly reduced the interferences to 0.00 V/m!

Fig. 1: Dielectric field interference at glass plates with turbulences. XYZ E field survey in 3x3 measuring grid, in front of a glass door. Electromagnetic waves, which meet a windowpane (also glass racks, glass tables and particularly mirrors), cause electrical turbulences: the cause of a dielectric field interference (point 4). The total interference was measured with 1.24 V/m in a current-optimized room.


2nd Part: Applications

In the following we point out the possible interference sources and how these can be masked by means of creaktiv Systems Twister Stop lenses.

Applications for Twister Stop Crystal Clear

The Twister Stop lenses crystal clear were developed to inform optically inconspicuous interfering fields and thus prevent harmful electrical turbulence formation. The Twister Stop lenses crystal clear consist of activated, informed crystal. By attaching the Twister Stop to a glass surface the information incorporated in the material is transferred to the glass and electrical turbulence formation is prevented to a large extent.

Windowpanes The Twister Stop lenses should always be attached diagonally in pairs to large windows and/or glass surfaces. For smaller glass surfaces also one Twister Stop lens can be sufficient. The windowpanes are the “gates“ for electrical smog from the outside into your house and should thus urgently be masked with Twister Stop lenses.

Glass RackSo far the poor sound of glass racks was exclusively attributed to the acoustic characteristics of glass. In addition, creaktiv Systems research shows the critical electrical turbulence characteristics of glass. Hence glass racks not only affect the human hearing ability but also create enormous interferences in hi-fi devices. Mask each level of your glass rack separately, depending on the size with one or two Twister Stop lenses, which are diagonally attached at the bottom. You will clearly obtain audible improvement.

Mirror SurfacesOn mirror surfaces the most intensive and harmful turbulences develop, as turbulences in the silvering in addition to the dielectric interferences on the glass develop. Since these are not shieldable, we recommend the use of a pair of Twister Stop lenses not only on mirrors in the listening room, but also on mirrors in the adjacent rooms.

Glass TablesEnd or side tables made from glass are of special brisance because of their proximity to the listener and should be masked with a pair of Twister Stop lenses.

Glass Showcases, Picture Frames, Other Glass SurfacesLikewise showcases and picture frames create electromagnetic turbulences, which greatly impair your listening ability. We recommend Twister Stop lenses per windowpane.


Applications for Twister Stop black

The Twister Stop lenses black were developed to inform particularly strong interference fields and to significantly reduce harmful electrical turbulence formation. This can be magnetic, electrical, or even dielectric field interference. Twister Stop lenses black presently represent the technically feasible for masking by informing. Therefore they are also suitable for extreme masking, such as large quantities of water in heating systems. Of course you can also use Twister Stop lenses black on large glass surfaces.

TweetersThe magnetic fields of tweeters represent substantial field interference. Their electromagnetic waves swirl and create noise. Tweeters can be significantly masked by attaching one Twister Stop lens black. Attach a Twister Stop lens black in the proximity of the diaphragm.

DiplexerIn a diplexer most different field interferences develop in a narrow space. Around these different electromagnetic turbulences will form. In order to obtain a masking of the diplexer the Twister Stop lens black has to be attached in the proximity of the diplexer.

Metal Loudspeaker CasingsLoudspeakers with metal casing represent an antenna for electromagnetic waves. Eddy currents are created in the casing. Everywhere, where eddy currents are created in metallic casings, potential turbulences form in the ambient air, at which electromagnetic waves swirl. If you inform your loudspeaker casings you reduce the interferences inside and around the casing. Stick a Twister Stop lens black to the loudspeaker casing in the proximity of the tweeter, the separating filter or the terminals, if possible.

TerminalsCaused by the wrong termination of the cable resistor in relation to the loudspeaker substantial eddy currents develop at the connectors and thus via the potential turbulences electromagnetic turbulences, which mask the signal. Screen the terminals by attaching a Twister Stop lens black next to the terminals.

Hi-Fi DevicesHi-fi and video devices (DVD, BlueRay player, etc.) create field interferences, where electromagnetic waves swirl and cause far larger interferences. By attaching a Twister Stop lens black the field interference is informed by the device and the creation of electrical turbulences is drastically reduced. We recommend the use of a Twister Stop lens black in the proximity of the power adapter, on CD players additionally above the CD drive.

TV Sets / MonitorsAt TV sets of all technologies (tube, plasma, LCD) substantial turbulences are created, which can be reduced via informing the current. Therefore a Twister Stop lens black should be attached next to the power input. Additionally we recommend the Twister Stop lens crystal clear TV/Image for the pane of TV sets. By using the Twister Stop lens both picture and sound quality will improve.


Power ConduitThe power conduit is not only the distributor of current, but also of interferences. Especially here much interference develops by potential turbulences by curling of electromagnetic waves. Attach one Twister Stop at the input of the power conduit.

Fuse PanelAt each fuse on the fuse box eddy currents and thus electromagnetic turbulences are created. Therefore the different phases and electric circuits can interfere with each other. According to the turbulence theories of Professor Dr. K. Meyl potential turbulences in dielectrics develop, where eddy currents exist in a conductor. The turbulences in the dielectric interact with each another. So-called electromagnetic longitudinal waves are created, which are not shieldable and are additionally of biological relevance. As we did not determine a connection between Hertz/transversal electromagnetic waves and hearing, we could however clearly prove a connection between Tesla/longitudinal electromagnetic waves and hearing.We recommend placing at least one black Twister Stop above/below the fuse(s), which are allocated for your hi-fi equipment. For perfect music playback it can make sense to screen the complete fuse panel with Twister Stop lenses. We recommend one black Twister Stop for every two fuses. Thus the current of all electrically driven devices and lamps is informed and the formation of electromagnetic turbulences in all conductors, wall outlets and consumers is reduced. This again leads to fewer interferences in your hi-fi equipment and additionally to a better hearing sensation - thus to a more natural sound.

HDD Recorders/Media PlayersHDD recorders or media players also cause field interference in standby mode, which negatively affects the playback of your hi-fi equipment. If the media player or the HDD recorder is in the proximity of the hi-fi equipment, you should screen these as well. Stick a black Twister Stop in the proximity of the power adapter.

DECT TelephoneDECT telephones continuously send pulsed high-frequency signals through the whole house/apartment. Due to the antenna technology used sound-relevant Tesla waves and in addition electromagnetic turbulences develop via the radiated Hertz transmission part at glass surfaces/windows, etc. Both worsen the music playback, or better, the music sensation. Screen your DECT base station by means of a Twister stop black. Stick it on or under the base station. We recommend leaving the hand set always on the base station to avoid unnecessary electrical smog.

DSL RouterDSL/WLAN routers play an ever more important role in today‘s music transmission. But these routers create electrical smog in the whole house themselves. If you screen your router the sound playback is improved in all rooms. Stick a Twister Stop on the router in the proximity of the antenna.

ComputerComputers disturb the sound of hi-fi equipment in a special way. On the one hand a high quantity of high frequency is irradiated into the network, and on the other hand WLAN cards, etc. radiate HF energy. If you have a computer in the listening room, screen it by attaching a Twister Stop in the proximity of the power adapter and near the WLAN transmitter, if necessary.


MonitorsIf a monitor is located in your listening room, this is likewise to be masked, since even in standby mode electromagnetic turbulences are created at this monitor. Stick a Twister Stop in the proximity of the power input. This will also improve the image quality.

Set Top BoxesSet top boxes not only create electrical interference fields when they are turned on, but also in standby mode. In case a set top box is operated in the listening room, mask this as well to optimize the sound. Stick a Twister Stop on the device in the proximity of the power adapter.

RepeaterIf you have a WLAN router in your house to be able to work from everywhere with your WLAN, please mask the WLAN router, since it creates additional electromagnetic waves and causes interferences in your hearing system and in hi-fi equipment. Attach a Twister Stop lens to the device.

Data/Video ProjectorData and video projectors to a large extent produce electromagnetic interferences. It is sensible to mask the video or data projector with a Twister Stop. A Twister Stop should be stuck in the proximity of the power input. The Twister Stop will improve not only the sound quality of your surround sound equipment but also the image quality. A further Twister Stop can be attached in the proximity of the lamp for image improvement.

Metal ShelvesMetal shelves work like antennas and swirl electromagnetic waves. On large metal surfaces and shelves we recommend the use of a black Twister Stop. The information will spread to the entire shelf and will mask it.

Heating SystemThe heating system (with water as heat transfer medium) in a dwelling creates, exactly like glass, a dielectric interference. Electromagnetic turbulences form along the entire heating system. For this reason the heating system is to be masked for natural music playback by attaching a Twister Stop with special fixing materials, treated by creaktiv Systems, at the water inlet and outlet. Apply the fixing material like a seal around the inlet and outlet pipes and press the Twister Stop firmly into the material. Individual radiators generally do not need to be masked after this procedure. In case you want to mask every single radiator, please test upfront weather it really leads to additional sound improvement. Test the individual masking of the radiators only after approximately one week, since informing of the heating system is only finalized after one week.

Underfloor HeatingThe water of the underfloor heating represents a substantial dielectric interference for an electromagnetic wave. Therefore electromagnetic turbulences will occur in the entire room, which create at least as intensive interferences with your perception as glass surfaces. In most cases an underfloor heating system is the overall sound-limiting factor. Masking with Twister Stop and fixing materials, particularly adapted by creaktiv Systems, which amplify the information of Twister Stop, can drastically reduce the sound impacts of the underfloor heating. The creaktiv Systems fixing material is kneaded around the inlet and outlet pipes of the underfloor heating system and the Twister Stop is firmly pressed into the material.


RadiatorsIf water inlet and outlet of the heating system are treated with Twister Stops, individual radiators generally do not have to be informed additionally, since the radiators are grounded and the interference is caused by the water. It is sufficient to mask the water inlet and outlet with one Twister Stop each in connection with the creaktiv Systems special fixing material (see underfloor heating).

Radio HeadphonesRadio headphones work, as long as they are turned on. Each radio system creates both electromagnetic Hertz waves and Tesla waves. Tesla waves are biologically relevant and impair the hearing. The Tesla waves are not shieldable and can negatively affect hi-fi equipment. For sound improvement of your hi-fi equipment attach a Twister Stop to the transmitter of your radio headphone, if active during music playback.

Light FittingsLight fittings create inevitably electrical smog. Particularly negative for the sound are energy-saving lamps and halogen lamps. One way of improving the sound quality is to phase all lamps (illuminants) equally. Thereby they create a mutual homogeneous interference field. It is even better to mask each lamp by means of one creaktiv Systems Twister Stop glass lens. Here also phase the lamps uniformly! For masking you proceed as follows: attach a Twister stop lens to the lamp body near the socket, for lamps with several holders at the power input.

TransformersFor lamps with transformers the transformer has to be masked by attaching a Twister Stop on top.

BluetoothBluetooth is a radio transmission. Every working radio system produces both electromagnetic Hertz waves and Tesla waves. Tesla waves are biologically relevant and impair the hearing. The Tesla waves are not shieldable and can negatively affect hi-fi equipment. For sound improvement of your hi-fi equipment attach a Twister Stop to each Bluetooth transmitter, which is active during music playback.

Clock RadioEven your clock radio represents an electromagnetic interference source and can be masked with a Twister Stop to improve the sound.


Workshop Notes

Audio Selection creaktiv GmbHDrieschweg 9

D - 53604 Bad Honnef

Tel.: +49 (0) 22 24 / 94 99 30Fax: +49 (0) 22 24 / 94 99 [email protected]

Disc Optimizer Twister-Stop Lenses Disc Control Power Optimizer

Reference Plus Rack Cable Power Plug Optimizer Air Field Equalizer

75 Ώ Optimizer LP Optimizer Power Fuse Optimizer Trend Plus Rack

Audio Plus Rack Tuning Chip Cable Optimizer Disc Chip

Products

user manual - twister stop - kemp elektroniks · be reduced via informing the current. therefore a...

Documents