user manual - outspot dutch...result in severe personal injury and damage. if you intend to install...

64

Upload: others

Post on 13-Mar-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring
Page 2: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring
Page 3: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

EN 01

User ManualModel: DO-SV-BTSB3-B

English

1) PACKAGE CONTENTS Wireless BT detachable soundbar (left & right) Remote control Stand (left & right) 3.5 mm – 3.5 mm audio cable Power cord User manual Wall mount brackets, plug, screw (2 pcs each) Rubber feet (3 pcs)

2) SAFETY INSTRUCTIONS

Always take the following basaaic precautions before using the “wireless BT detachable soundbar”, hereinafter referred to as the ‘device’.

General information • Read the instructions for use carefully and keep them safe. If you give this device to other people, please also pass on this manual. • Only use this device in accordance with the instructions in this user manual. • The device is not a toy. Keep it out of the reach of children and pets. • All warnings on the device and in the operating instructions should be adhered to.

• WARNING! Do not leave packaging material lying around carelessly. This may become dangerous playing material for children. Risk of suffocation!

TABLE OF CONTENT: 1) Package contents2) Safety instructions3) Installing and using the product4) Specification5) Cleaning and maintenance6) Storage & transportation

A

AB BC

C

D

D

E

EF

FG

G

H

H

Page 4: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

EN 02

Electricity and heat • Prior to use, check that the mains voltage is the same as the mains voltage stated on the device. • Make sure your hands are dry before touching the device, power cord / plug. • Insert the power plug into an electrical outlet that is easily accessible at all times and a socket designed for 2 round pins (Types C, E, F, J, K and L). • Do not operate the device using an external time switch or a separate remote control system.

• WARNING! Never cover the device & power cord with cloths, curtains or any other material to prevent overheating and possible fire hazards. • To reduce or prevent the risk of personal injury, electrical shock, fire or damage; never insert metal objects into any openings of the device, power cord or power socket. • When removing the power plug from the electrical outlet, always pull the power plug, never pull the cord. • Check the power cord regularly for damage. • Never use the device if the power cord shows signs of damage, if the device has fallen on the ground or shows any other signs of damage. • Remove the power plug from the socket when the device is not in use or is being cleaned. • Make sure the power cord cannot be trodden on or pinched. • Do not allow the power cord to hang over sharp edges and keep it away from hot objects and naked flames. • When plugging in the power cord, make sure people cannot accidentally pull it out or trip over it. • Remove the power cord from the power socket during lighting storms or if unused for long periods of time. • This device is a Class ll or double insulated electrical device. As a result, it does not need to be electrically earthed.

Batteries and heat • Make sure the remote control battery compartment is secured. • Only use batteries specified in the battery compartment (CR2025 / 3V). • Make sure you respect the polarity when placing batteries. • Do not short-circuit contacts inside the battery compartment or any batteries. • To avoid leakage, remove the battery if the remote control is not used for a long period of time. • Empty batteries should be removed from the remote control to avoid leakage. • If the battery leaks, do not allow battery fluid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. • Keep batteries out of the reach of children. • Do not expose the remote control to excessive heat sources like fire or direct sunlight (including amplifiers).

Page 5: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

EN 03

• Do not crush, puncture or dismantle the remote control; this might damage the battery. • Damaging the casing of the remote control and/or piercing it can lead to explosion or fire! • Do not throw the remote control or battery into a fire because it may explode! • Do not dispose of batteries in your household waste. Batteries can be disposed of by taking them to your local recycling centre. Contact your local government offices for details.

Use • This device is intended for domestic or similar use. • Only use the device indoors, in dry areas and not in the vicinity of water, other liquids or humidity. • Avoid locations subject to vibrations, excessive dust, cold or humidity. • Do not install near heat sources like radiators, heaters, stoves, or other equipment (including amplifiers) that produces heat. • Do not expose the device to direct sunlight, excessive humidity or corrosive environments. • Do not block ventilation openings. • Minimum distance around the apparatus for sufficient ventilation is 5 cm. • Ventilation should not be impeded by covering ventilation openings with items like newspapers, tablecloths, curtains, etc. • Do not place the device under mechanical stress. • Do not use or store the device in an environment subject to strong static electricity or magnetic fields. • Improper use of the device could damage the product. • Please handle the device carefully. Impacts or falls, even from a low height, can damage the device. • Do not use the device if it has fallen into water or any kind of fluid. • Do not open the cabinet as this may result in electric shock. • Do not attempt to disassemble or repair the device, or modify it in any manner. • The device must be serviced if it has been damaged in any way, i.e. the power supply cord is damaged; liquid has been spilled; objects have fallen into it; it has been exposed to rain or moisture; has been dropped or does not operate normally.

• WARNING! To reduce the risk of fire or electric shock, protect the device from dripping or splashing water, and keep away from objects filled with liquids, such as vases. These objects should not be placed on or near the device. • Do not use abrasive cleaning solvents to clean the device. • Do not use foreign objects to clean the device. • WARNING! To prevent possible hearing damage, do not listen at high volume for long periods.

Page 6: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

EN 04

3) INSTALLING AND USING THE DEVICE

Open the packaging carefully before taking out the device. Make sure the device is complete and undamaged. If any components are missing or damaged, contact the vendor and do not use the product. Retain the packaging or recycle it in accordance with local regulations.

Parts & features device Speakers Remote control sensor Wall bracket screws SRC button, select the input source Power ON/OFF button (Standby mode) LED indicators VOL+/VOL- buttons, decrease/increase the volume level AUX port (3.5 mm audio input jack) Coaxial port OPTICAL out port HDMI ARC port AC power socket

1

1 1

2

2

3

3

4

4

5

5

9

9

10

10

11

11

12

12

6

6

7

7

8

8

Page 7: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

EN 05

Parts & features remote control Power ON/OFF button (Standby mode) Input source selection button (AUX-BT-HDMI-OPTICAL-COAXIAL) VOL+/VOL- buttons, increase/decrease the volume level. & buttons, skip to previous/next track in BT mode. /PAIR button, play/pause playback in BT mode & press and hold to activate the pairing function in BT mode or disconnect the existing paired BT device. Mute button, mute or resume the sound Music EQ button, equalizer, select a pre-set sound effect

Initial setup remote controlThe provided remote control allows the device to be operated from a distance. Even if the remote control is operated within the effective range (<6m), remote control operation may be impossible if there are obstacles between the device and the remote control. The device may operate incorrectly if the remote control is operated near other products that generate infrared rays, or if other remote control devices using infra-red rays are used near the device. Conversely, the other products may operate incorrectly.

First-time use:The remote control has a pre-installed lithium CR2025 battery. Remove the protective tab to activate the remote control battery.

Inserting the remote control battery:1) Push the security lock2) Pull out the battery tray and remove the old battery. 3) Place a new CR2025 battery into the battery tray with correct polarity (+/-) as indicated. 4) Replace battery tray in the slot.

Placement / mounting of the deviceThe device can be placed vertically on its stand, horizontally on a table or TV stand, or attached to a wall.

AB

C

DE

A

B

C

D

E

1 2

43

Page 8: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

EN 06

B. If your TV is placed on a table or TV stand, you can place the device on it directly in front of the TV, centred with the TV screen.To avoid and absorb vibrations, install the rubber feet supplied under the device.To install the rubber foot:Note: Ensure the surface is clean prior to sticking the rubber foot to the bottom of the device.1. Turn the device upside down.2. Remove the backing paper from the rubber foot.3. Stick the rubber foot to the bottom of the device as shown in the illustration below.Note: The device will increase a bit in height due to the placement of the foot.

A. Stand mounting (vertical)Place the device on the stand and turn it counter-clockwise until it is solidly attached to the stand.Connect the cables of the stand with each other.

Page 9: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

C. If your TV is attached to the wall, you can mount the device centred on the wall directly below the TV screen.

Installation must only be carried out by qualified personnel. Incorrect assembly can result in severe personal injury and damage.If you intend to install this device yourself, you must check for installations such as electrical wiring and plumbing that may be buried inside the wall. The installer is responsible for verifying whether the wall will safely support the total load of the device and wall brackets.Additional tools (not included) are required for installation.Do not over-tighten screws.Use an electronic stud finder to check the wall before drilling and mounting. 1) Remove the screws from the device.2) Attach the wall brackets to the device using the screws removed from the device.3) Drill 2 parallel holes (Ø 3-8 mm each according to wall type) in the wall. The distance between the holes should be 767 mm.4) Firmly fix 1 plug into each hole in the wall if necessary.5) Insert 1 screw into each hole or plug. Leave a 5 mm gap between the wall and the screw head. Lift the device with the attached wall brackets over the heads of the screws and slot into place.

EN 07

Page 10: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

ConnectionsHDMI ARC portYou can connect the device to any AV and TV featuring a HDMI ARC (Audio Return Channel) port.

The ARC function allows you to send audio from your ARC compliant TV to your device through a single HDMI connection. To use the ARC function, please make sure your TV is equipped with HDMI-CEC and ARC.When correctly set up, you can use your TV remote control to adjust the volume of the connected device.

Connect the HDMI cable (not included) from the device’s HDMI port to the HDMI (ARC) port on your TV (minimum HDMI 1.4).Then press the SOURCE button on the device until the LED indicator flashes green or press the HDMI ARC button on the device’s remote control to select HDMI ARC source mode. The LED indicator will flash green.

Please note: • Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC must be set to ON, on your TV. • The setting method for HDMI-CEC and ARC may differ depending on your TV. For details about the ARC function, please refer to the manual of your TV. • Only HDMI 1.4 cables can support the ARC function!

Optical portYou can connect the device to any AV and TV featuring an optical port.

The optical port allows you to send audio from your TV to your device via an optical connection. To use the optical function, please make sure your TV features an optical port.

EN 08

11

4 6

6B

Page 11: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

Remove the protective cap from the optical port ; then connect an optical cable (not included) between the TV’s optical out port and the optical port on the device.Then press the SOURCE button on the device until the LED indicator lights up orange or press the OPTICAL button on the device’s remote control to select optical mode. The LED indicator will light up orange.

Please note: If there is no sound output and the indicator flashes, make sure the audio setting on the input source (e.g. TV, game console, DVD player, etc.) is changed to "PCM" with optical and coaxial output.

Coaxial portYou can connect the device to any coaxial AV and TV out port via the coaxial port.The coaxial port allows you to send audio from your TV to your device via a coaxial connection. To use the coaxial function, please make sure your TV features a coaxial port.

Connect a coaxial cable between the TV’s coaxial out port and the coaxial port on the device.Then press the SOURCE button on the device until the LED indicator flashes orange or press the COAXIAL button on the device’s remote control to select coaxial mode. The LED indicator flashes orange.

AUX portYou can connect the device to any AV and TV via the AUX port.The AUX port allows you to send audio from your TV to your device via an AUX (3.5 mm) connection. To use the AUX function, please make sure your TV features an AUX port.

EN 09

10

4

4

6

6

9

6

6

5

B

B

Page 12: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

Connect an AUX cable between the TV’s AUX out port and the AUX port on the device.Then press the SOURCE button on the device until the LED indicator lights up green or press the AUX button on the device’s remote control to select AUX mode. The LED indicator will light up green.

A. Use a RCA to 3.5 mm audio cable (included) to connect the TV’s audio output port to the AUX port on the device.B. Use a 3.5 mm to 3.5 mm audio cable (included) to connect an external audio device headphone socket to the AUX socket on the device.

Power connectionBefore connecting the AC power cord, make sure you have completed all other connections. • Prior to use, check that the mains voltage is the same as the mains voltage stated on the device. • Plug the power plug into the mains supply. • Plug the power plug of the power cord into the AC power socket of the device . • The device is now in standby mode. The standby LED indicator will light up red.

Power ON/OFF – StandbyPress the power button on the device or press the power button on the device’s remote control to switch it ON. The LED indicator of the last used source mode will light up.Press the power button on the device or press the power button on the device’s remote control to switch the device to standby mode. The LED Indicator will light up red.Disconnect the power plug from the mains supply if you want to switch the device OFF completely.

Please note:If the device is not in use (no input), it will automatically go into standby mode after 15 minutes. If the device’s external input signal is too low, it will automatically go to standby mode after 15 minutes. Please increase the input signal of your externally connected device.

EN 10

4 6

6

6

6

5

5

8

8

6B

A

A

12

Page 13: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

MODE selectionPress the SOURCE button on the device, or the desired AUX – BT - HDMI ARC – OPTICAL – COAXIAL button on the device’s remote control to select the desired input mode.The selected mode will be shown on the devices LED indicator :• RED: standby mode.• GREEN: AUX mode.• GREEN FLASH: HDMI ARC mode.• BLUE: BT mode.• ORANGE: optical mode.• ORANGE FLASH: coaxial mode.

Please note:If the device source is in BT mode, and the BT connection is no longer active or out of range, the LED indicator will flash blue.If the device source is in HDMI ARC mode, and there is no active input signal, the LED indicator will flash green.

Volume control• Press the volume + & - buttons on the device, or the VOL+ & VOL- buttons on the device’s remote control to adjust the volume.• If you wish to turn the sound OFF, press the MUTE button on the remote control. Press the MUTE button again or press the VOL+ or VOL- button to resume normal volume.• While adjusting the volume, the LED indicator of the selected source mode will flash quickly.• When the volume level reaches maximum, and you try to increase it further, the LED indicator for the selected source will flash once. • When the volume level reaches its minimum, and you try to decrease it further, the LED indicator of the selected source will flash once.

Select a pre-set sound effectWhile playing, press the NEWS, MOVIE, MUSIC buttons on the device’s remote control to select the desired pre-set equalisers.

Pre-set modes• Movie (recommended for viewing movies).• Music (recommended for listening music).• NEWS (recommended for listening news / talk).

While selecting a pre-set sound effect, the LED indicator of the selected source flashes quickly.

MODE selection (AUX / COAXCIAL / HDMI ARC / OPTICAL)Make sure that the device is connected to the TV or audio device.

EN 11

4

6

B

C

C

E

DD

6

6

6

6

6

6

7

Page 14: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

While the device is powered ON, press the SOURCE button on the device, or AUX – HDMI ARC – OPTICAL - COAXIAL button on the remote control to select the desired source mode. The LED indicator will light up in the colour of the selected source.You can operate your sound and playback features directly from your connected audio device.

Please note:If there is no sound output and the LED indicator of the selected source mode is flashing, make sure the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is changed to "PCM" on your audio device (e.g. CD, DVD, Blu-ray).

Making a BT connectionYou will need to pair your BT enabled audio player with the device when you use it for the first time.

• Press the SOURCE button on the device or the BT button on the device’s remote control to select BT mode. The LED Indicator will flash blue slowly. The device is now in pairing mode.• Keep your BT enabled audio player within 1 m (3 ft) of the device during the pairing process.• Make your BT enabled audio player search for compatible BT devices and select ”DO-SV-BTSB3” from the list of found devices. Once successfully paired, you will hear the voice prompt “paired“ and the LED indicator will light up blue.• If you cannot find the device in the list of available BT connections, you can start the pairing process manually. Press and hold the /PAIR button on the device remote control. You will hear the voice prompt “pairing“ from the device. The LED Indicator will flash blue rapidly.• Select ”DO-SV-BTSB3” from the list of found devices. After the “paired” voice prompt, the BT connection will be successfully established and the LED indicatorwill light up blue.• If you want to connect another BT enabled audio player to the device, press the /PAIR button on the remote control to disconnect the active paired connection, until you hear the voice prompt “disconnected”.• If you want to play and/or pause music on your connected BT audio player, open your media player and press play/pause.• To control your music, use the play, track & volume buttons on your connected BT audio player or use the “control buttons” on the control panel of the device or remote control.• If a paired BT audio player is within range, it will automatically connect to the device.

Please note:• If a PIN code is requested when making a BT connection, enter 0000.

EN 12

B

B

C

C

4

4

6

6

6

6

6

6

Page 15: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

• If there is an existing BT connection, press and hold the /PAIR button on the remote control to re-activate the pairing mode. The existing connection will be interrupted and you will hear the voice prompt “disconnected”.• If a paired BT audio player gets out of range, it will disconnect from the device and you will hear the voice prompt “disconnected”.• If no other BT device pairs with the device within two minutes, the player will restore its previous connection/mode.

Listening to music from BT enabled audio player.You can listen to your music of the connected BT enabled audio player, if it supports Advanced Audio Distribution Profile (A2DP).The device supports Audio Video Remote Control (AVRCP), which means you can use the device’s remote control to play music on the BT enabled audio player.• To play music of your connected audio player, you can use the control buttons of your media player.• To play/pause music of your connected audio player, you can use the /PAIR button on the device’s remote control.• To play the next or previous track of your connected audio player, you can use the & buttons on the device’s remote control.

4) SPECIFICATIONS • Power input: 220-240 Vac – 50/60Hz • Power consumption: 30W (<0.5W in standby mode) • Stereo speakers: 50W (2x 25W) • Speaker resistance: 2x 8 Ω • Frequency response: 40 Hz – 20 kHz • BT version 4.2 • Transmission power: class II • Maximum power transmitted: <5dbm • Operation distance: up to 10 m • Frequency: 2.4 Ghz. – 2.48 Ghz • BT profiles: A2DP, AVRCP • Remote control distance: 6m, angle 30° • Dimensions: 80 x 6 x 6 cm (L x W x H) horizontal - soundbar • Dimensions: 12.8 x 12.8 x 46.7 cm (L x W x H) vertical – stand/tower speaker • Weight: 1.4 Kg. horizontal - soundbar • Weight: 1.6 Kg. vertical – stand/tower speaker

5) CLEANING AND MAINTENANCE

WarningBefore cleaning the device, always switch it OFF, disconnect it from the mains electricity and allow it to cool down fully.

EN 13

C

C

C

Page 16: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

Your product has been manufactured using high quality materials and components which can be recycled and used again. At the end of its service life, this product cannot be disposed of in normal domestic waste, but must be taken to a special collection point for recycling electrical and electronic equipment. This is indicated in the user manual and in the packaging by the waste container marked with a cross symbol. Used raw materials are suitable for recycling.

By recycling used appliances or raw materials, you are playing an important role in protecting our environment. You can ask your local council about the location of your nearest collection point.

INSTRUCTIONS FOR PROTECTING THE ENVIRONMENT(WEEE, the waste electrical and electronic equipment directive)

Cleaning• Never use aggressive or abrasive cleaning materials, cleaning alcohol or sharp objects like hard brushes.• Clean the exterior of the casing and the power cord with a damp cloth.• Then dry the exterior with a dry cloth.

6) STORAGE & TRANSPORTATION• When storing the device, it should first be cleaned in accordance with this user manual. The device should be stored in its original packaging.• Always store the device in a dry and well-ventilated room and beyond the reach of children.• Protect the device against vibrations and shocks during transport.

All contents and specifications mentioned in this manual are subject to change without prior notice.

EN 14

Page 17: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

GEBRUIKSHANDLEIDINGDO-SV-BTSB3-B

Nederlands

A B C

D E F

G H

NL 01

1) INHOUD VERPAKKING Draadloze scheidbare BT soundbar (links en rechts) Afstandsbediening Standaard (links en rechts) 3,5 mm – 3,5 mm audiokabel Stroomsnoer Gebruikershandleiding Beugels, pluggen, schroeven (van elk 2) voor montage aan de muur Rubber pootjes (3 stuks)

2) VEILIGHEIDSINSTRUCTIES

Tref altijd de volgende algemene voorzorgsmaatregelen voordat u de ‘Draadloze scheidbare BT soundbar’ gebruikt (hierna ‘apparaat' te noemen).

Algemene informatie • Lees de gebruiksaanwijzingen zorgvuldig en bewaar ze op een veilige plek. Als u dit apparaat aan iemand anders geeft, geef deze handleiding daar dan bij. • Gebruik dit apparaat uitsluitend volgens de instructies in deze gebruikshandleiding. • Dit apparaat is geen speelgoed! Houd het buiten bereik van kinderen en huisdieren. • Houd u aan alle waarschuwingen weergegeven op het apparaat en in de handleiding. • WAARSCHUWING! Laat verpakkingsmateriaal niet onbeheerd rondslingeren. Het kan gevaar opleveren wanneer kinderen ermee spelen. Kans op verstikking!

INHOUDSOPGAVE:1) Inhoud verpakking2) Veiligheidsinstructies3) Het product installeren en gebruiken4) Specificaties5) Reiniging en onderhoud6) Opslag en transport

A

BCDEFG

H

Page 18: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

NL 02

Elektriciteit en warmte • Controleer vóór gebruik of de netspanning gelijk is aan de spanning vermeld op het apparaat. • Zorg ervoor dat uw handen droog zijn als u het apparaat, het stroomsnoer of de stekker gaat reinigen. • Steek de stekker in een stopcontact dat gemakkelijk toegankelijk is en dat is bedoeld voor 2 ronde pinnen (type C, E, F, J, K en L). • Gebruik het apparaat niet met een externe tijdschakelaar of een afzonderlijke afstandsbediening. • WAARSCHUWING! Bedek het apparaat en het stroomsnoer nooit met doeken, gordijnen of enig ander materiaal om oververhitting en mogelijk zelfs brand te voorkomen. • Om het risico van persoonlijk letsel, elektrische schok, brand of schade te verminderen of voorkomen, moet u nooit metalen voorwerpen in een opening van het apparaat, het stroomsnoer of het stopcontact steken. • Wanneer u de stekker uit het stopcontact haalt, trek dan aan de stekker zelf en nooit aan het snoer. • Controleer het stroomsnoer regelmatig op beschadigingen. • Gebruik het apparaat niet als het snoer of de stekker beschadigingen vertoont of als het apparaat op de grond is gevallen of andere sporen van schade vertoont. • Haal altijd de stekker uit het stopcontact wanneer u het apparaat niet gebruikt of wilt reinigen. • Zorg ervoor dat niemand op het stroomsnoer kan staan of dat het snoer anderszins kan worden bekneld. • Laat het stroomsnoer niet over scherpe randen hangen en houdt het uit de buurt van warme objecten en open vuur. • Wanneer u de stekker van het stroomsnoer in het stopcontact steekt, zorg er dan voor dat niemand de stekker per ongeluk los kan trekken of over het snoer kan struikelen. • Haal de stekker van het stroomsnoer uit het stopcontact als het onweert of als u het apparaat gedurende langere tijd niet gebruikt. • Dit apparaat is een klasse II of dubbel geïsoleerd elektrisch apparaat. Het apparaat hoeft daarom niet te worden geaard.

Batterijen en warmte • Zorg ervoor dat het batterijvakje van de afstandsbediening goed dicht zit. • Gebruik alleen de batterijen die worden aangegeven in het batterijvakje (CR2025 / 3V). • Let bij het plaatsen van de batterijen op de juiste polariteit. • Voorkom kortsluiting tussen de contactpunten in het batterijvakje of tussen batterijen. • Om lekkage van batterijen te voorkomen, raden wij aan de batterijen te verwijderen als u het apparaat gedurende langere tijd niet gebruikt. • Lege batterijen moeten uit de afstandsbediening worden verwijderd om te voorkomen dat ze gaan lekken.

Page 19: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

NL 03

• Wanneer een batterij lekt, zorg er dan voor dat er geen batterijvloeistof terecht komt op uw huid of in uw ogen. Wanneer batterijvloeistof in contact is gekomen met de huid of ogen, moet het betreffende gebied worden afgespoeld met grote hoeveelheden water en moet u een arts raadplegen. • Houd batterijen buiten bereik van kinderen. • Zorg ervoor dat de afstandsbediening niet wordt blootgesteld aan extreme warmtebronnen, zoals versterkers, vuur of rechtstreeks zonlicht. • Zorg ervoor dat de afstandsbediening niet wordt beschadigd of gedemonteerd; hierdoor kan de batterij beschadigd raken. • Beschadiging van de behuizing van de afstandsbediening kan leiden tot een explosie of brand! • Gooi de afstandsbediening of de batterij ervan nooit in een vuur omdat deze kunnen ontploffen! • Gooi batterijen nooit weg bij het huishoudelijk afval. U kunt batterijen inleveren bij het lokale recycle-centrum. Neem contact op met de lokale overheidsinstanties voor nadere informatie.

Gebruik • Dit apparaat is uitsluitend bedoeld voor huishoudelijk of vergelijkbaar gebruik. • Gebruik het apparaat uitsluitend binnenshuis, in droge gebieden en niet in de buurt van water, andere vloeistoffen of vocht. • Vermijd locaties die blootstaan aan trillingen, vrieskou, een te hoge luchtvochtigheid of een buitensporige hoeveelheid stof. • Plaats het apparaat niet in de buurt van warmtebronnen, zoals radiatoren, verwarmingselementen, kachels of andere producten (waaronder versterkers) die warmte produceren. • Bescherm het apparaat tegen direct zonlicht, overmatige vochtigheid en corrosieve omgevingen. • Zorg ervoor dat ventilatie-openingen niet worden geblokkeerd. • De minimum afstand rond het apparaat voor voldoende ventilatie is 5 cm. • De ventilatie mag niet worden gehinderd door het afdekken van ventilatie-openingen met dingen zoals kranten, tafelkleden en gordijnen. • Zorg ervoor dat het apparaat niet wordt blootgesteld aan enige mechanische belasting. • Gebruik of bewaar het apparaat niet in een omgeving met sterke statische elektriciteit of magnetische velden. • Het apparaat kan beschadigd raken als het verkeerd wordt gebruikt. • Ga voorzichtig met het apparaat om. Het apparaat kan beschadigd raken door een stoot of val, zelfs van een geringe hoogte. • Gebruik het apparaat niet als het in water of een andere vloeistof is gevallen. • Bij het openen van de behuizing bestaat de kans op een elektrische schok. • Probeer het apparaat niet te demonteren, te repareren of anderszins aan te passen. • Het apparaat moet worden gerepareerd als er sprake is van enige vorm van schade, wanneer bijvoorbeeld het stroomsnoer is beschadigd, er vloeistof op

Page 20: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

1 12

3

NL 04

het apparaat is gemorst, voorwerpen op het apparaat zijn gevallen, het apparaat is blootgesteld aan regen of vocht, het apparaat is gevallen of het apparaat niet normaal functioneert. • WAARSCHUWING! Om de kans op brand of elektrische schokken te verminderen moet u het apparaat beschermen tegen druppelend of opspattend water en uit de buurt houden van met water gevulde voorwerpen, zoals vazen. Dergelijke voorwerpen mogen niet op of in de buurt van het apparaat worden geplaatst. • Gebruik geen schurende schoonmaakmiddelen om het apparaat te reinigen. • Gebruik geen vreemde voorwerpen om het apparaat te reinigen.

• WAARSCHUWING! Om gehoorschade te voorkomen, raden wij aan het volume niet langdurig op een hoog niveau te houden.

3) INSTALLATIE EN GEBRUIK VAN HET APPARAATOpen de verpakking voorzichtig en haal het apparaat eruit. Controleer of het apparaat volledig en onbeschadigd is. Mochten er onderdelen beschadigd zijn of ontbreken, neem dan contact op met de verkoper en gebruik het product niet. Bewaar de verpakking of recycle deze zoals voorgeschreven door lokale regelgeving.

Onderdelen en functies van het apparaat Speakers Sensor afstandsbediening Schroeven voor de muurbeugel SRC-knop, voor het selecteren van de ingangsbron Aan/uit-knop (standby-modus) LED-indicatielampjes Knoppen VOL+/VOL- voor het verlagen/verhogen van het volume AUX-poort (3,5 mm audio-ingangstekker) Coax-poort OPTISCHE uitgang HDMI ARC-poort Stopcontact (wisselstroom)

12345

9101112

678

Page 21: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

4 5 9 10 11 126 7 8

A

B

C

D

E

NL 05

Onderdelen en functies van de afstandsbediening AAN- /UIT-knop (stand-by modus) Selectieknop ingangsbron (AUX-BT-HDMI-OPTICAL-COAXIAL) Knoppen VOL+/VOL-, volume verhogen / verlagen.Knoppen en , naar de vorige / volgende track gaan in BT-modus. /PAIR-knop, afspelen / pauzeren in BT-modus en ingedrukt houden om in BT-modus de koppel-functie te activeren of het bestaande gekoppelde BT-apparaat los te koppelen. Mute-knop, om het geluid uit of weer aan te zetten Muziek EQ-knop, equalizer, om een vooraf ingesteld geluidseffect te selecteren

Eerste instelling van de afstandsbedieningMet de meegeleverde afstandsbediening kan het apparaat op afstand worden bediend. Zelfs als de afstandsbediening wordt gebruikt binnen het effectieve bereik (<6 m), kan de werking van de afstandsbediening worden belemmerd door obstakels tussen het apparaat en de afstandsbediening. Het apparaat werkt mogel i jk niet goed als de afstandsbediening wordt gebruikt in de buurt van andere apparaten die infraroodstraling genereren, of wanneer een andere afstandsbediening met infraroodstraling wordt gebruikt in de buurt van het apparaat. Ook is het mogelijk dat de andere apparaten niet goed werken.

Het eerste gebruik:De afstandsbediening is voorzien van een vooraf geïnstalleerde lithium CR2025-batterij.Verwijder het beschermlipje om de batterij van de afstandsbediening te activeren.

AB

C

DE

Page 22: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

NL 06

Batterij van de afstandsbediening plaatsen:1) Duw op de veiligheidsvergrendeling.2) Trek het batterijvakje naar buiten en verwijder de oude batterij.3) P laats een n ieuwe CR2025-bat ter i j in het batterijvakje en let daarbij op de aangegeven polariteit (+/-).4) Plaats het batterijvakje terug in de sleuf.

Het apparaat plaatsen / bevestigenHet apparaat kan verticaal op de standaard worden geplaatst, horizontaal op een tafel of TV-standaard, of worden bevestigd aan een muur.

A. Plaatsing op de standaard (verticaal)Plaats het apparaat op de standaard en draai het linksom tot het stevig vastzit aan de standaard.Verbind de kabels van de standaard met elkaar.

B. Als uw TV op een tafel of TV-standaard is geplaatst, kunt u het apparaat daarop plaatsen, vlak vóór en in het midden van het TV-scherm.Om trillingen te voorkomen en absorberen, kunt u de meegeleverde rubber pootjes onder het apparaat plaatsen.De rubber pootjes plaatsen:Let op: Zorg ervoor het oppervlak schoon voordat u de rubber pootjes op de onderkant van het apparaat plaatst.

1 2

43

Page 23: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

NL 07

1. Draai de apparaat ondersteboven.2. Verwijder het rugpapier van de rubber pootjes.3. Plak de rubber pootjes op de onderkant van het apparaat zoals aangegeven in de onderstaande afbeelding.

Let op: Het apparaat zal iets hoger worden door het plaatsen van de pootjes.

C. Als uw TV aan de muur is bevestigd, kunt u het apparaat aan de muur hangen, vlak onder en in het midden van het TV-scherm.

De installatie mag uitsluitend worden uitgevoerd door een gekwalificeerde monteur. Een verkeerde installatie kan leiden tot ernstig lichamelijk letsel en schade.Als u van plan bent dit apparaat zelf te installeren, dan moet u controleren of er in de muur geen elektrische bedrading of leidingen zijn geïnstalleerd. Degene die het apparaat installeert is ervoor verantwoordelijk te controleren of de muur de totale belasting van het apparaat en de muurbeugels veilig kan dragen.Voor de installatie is extra gereedschap vereist (niet inbegrepen).Draai de schroeven niet te strak aan.Gebruik voorafgaand aan het boren en monteren een elektronische balkzoeker om de muur te controleren. 1) Verwijder de schroeven van het apparaat.2) Verbind de muurbeugel met het apparaat met behulp van de schroeven die uit het apparaat zijn verwijderd.3) Boor 2 parallelle gaten in de muur (elk Ø 3-8 mm, afhankelijk van het type muur). De afstand tussen de gaten moet 767 mm zijn.4) Steek - indien nodig - in elk gat in de muur 1 plug.5) Draai in elk gat of elke plug 1 schroef. Laat tussen de muur en de schroefkop een

Page 24: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

ruimte van 5 mm. Til het apparaat met de daaraan verbonden muurbeugels over de schroefkoppen en hang het apparaat op.

NL 08

VerbindingenHDMI ARC-poortU kunt het apparaat aansluiten op elk AV-apparaat en elke TV met een HDMI ARC-poort (Audio Return Channel).

Via de ARC-functie kunt u met behulp van één enkele HDMI-aansluiting audio van uw ARC-compatibele TV naar uw apparaat sturen. Om van de ARC-functie gebruik te kunnen maken, moet u controleren of uw TV is uitgerust met HDMI-CEC en ARC.Wanneer de afstandsbediening van uw TV correct is ingesteld, kunt u deze gebruiken om het volume van het aangesloten apparaat aan te passen.

Installeer de HDMI-kabel (niet inbegrepen) tussen de HDMI-poort van het apparaat en de HDMI (ARC)-poort van uw TV (minimaal HDMI 1.4).Druk vervolgens op de SOURCE-knop op het apparaat tot het LED-indicatielampje 11

4

Page 25: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

.. groen knippert of druk op de HDMI ARC-knop op de afstandsbediening van het apparaat om de HDMI ARC-bronmodus te selecteren. Het LED-indicatielampje gaat groen knipperen.

Let op:• Uw TV moet de HDMI-CEC- en ARC-functie ondersteunen. HDMI-CEC en ARC moeten op uw TV AAN worden gezet.• De methode voor het instellen van HDMI-CEC en ARC kan per TV verschillen. Raadpleeg de handleiding van uw TV voor meer informatie over de ARC-functie.• De ARC-functie werkt alleen met HDMI 1.4-kabels!

Optische poortU kunt het apparaat aansluiten op elk AV-apparaat en elke TV met een optische poort.

Via de optische poort kunt u met behulp van een optische verbinding audio van uw TV naar uw apparaat sturen. Om gebruik te kunnen maken van de optische functie, moet u controleren of uw TV is uitgerust met een optische poort.

NL 09

Verwijder het beschermdopje van de optische poort en installeer daarna een optische kabel (niet inbegrepen) tussen de optische uitgang van uw TV en de optische poort van het apparaat.Druk vervolgens op de SOURCE-knop op het apparaat tot het LED-indicatielampje oranje gaat branden of druk op de OPTICAL-knop op de afstandsbediening van het apparaat om de optische modus te selecteren. Het LED-indicatielampje gaat oranje branden.

Let op:Als er geen geluid is en het indicatielampje knippert, moet u de audio-instelling van de invoerbron (zoals TV, spelcomputer, DVD-speler) wijzigen naar "PCM" bij optische en coaxiale uitvoer.

Coax-poortU kunt het apparaat via de coax-poort aansluiten op de coax-uitgang van een AV-apparaat en TV.Via de coax-poort kunt u met behulp van een coax-verbinding audio van uw TV naar uw apparaat sturen. Om gebruik te kunnen maken van de coax-functie, moet u controleren of uw TV is uitgerust met een coax-poort.

10

4

66

66

5

B

B

Page 26: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

Sluit een AUX-kabel aan tussen de AUX-uitgang van de TV en de AUX-poort van het apparaat.Druk vervolgens op de SOURCE-knop op het apparaat tot het LED-indicatielampje oranje gaat branden of druk op de AUX-knop op de afstandsbediening van het apparaat om de AUX-modus te selecteren. Het LED-indicatielampje gaat groen branden.

A. Gebruik een RCA-naar-3,5 mm-audiokabel (meegeleverd) om de audio-uitgang van de TV te verbinden met de AUX-poort van het apparaat.B. Gebruik een 3,5 mm naar 3,5 mm-audiokabel (meegeleverd) om de hoofdtelefoonaansluiting van een extern audioapparaat te verbinden met de AUX-aansluiting van het apparaat.

Sluit een coax-kabel aan tussen de coax-uitgang van de TV en de coax-poort van het apparaat.Druk vervolgens op de SOURCE-knop op het apparaat tot het LED-indicatielampje . oranje gaat branden of druk op de COAX-knop op de afstandsbediening van het apparaat om de coax-modus te selecteren. Het LED-indicatielampje gaat oranje branden.

AUX-poortU kunt via de AUX-poort het apparaat verbinden met een AV-apparaat en TV .

Via de AUX-poort kunt u met behulp van een AUX-verbinding (3,5 mm) audio van uw TV naar uw apparaat sturen. Om gebruik te kunnen maken van de AUX-functie, moet u controleren of uw TV is uitgerust met een AUX-poort.

NL 10

46

9

6B

46

8

8

6B

Page 27: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

VoedingsaansluitingVoordat u het stroomsnoer aansluit, moet u controleren of alle overige verbindingen tot stand zijn gebracht.• Controleer vóór gebruik of de netspanning overeenkomt met de op het apparaat vermelde netspanning.• Steek de stekker in het stopcontact.• Steek de stekker van het stroomsnoer in de stroomaansluiting van het apparaat .• Het apparaat staat nu in de standby-modus. Het LED-indicatielampje voor stand-by gaat rood branden.

NL 11

AAN-/UIT-knop – standbyDruk op de aan-/uit-knop van het apparaat of druk op de aan-/uit-knop van de afstandsbediening van het apparaat om het apparaat aan te zetten.Het LED-indicatielampje van de laatste gebruikte bronmodus gaat branden.Druk op de aan-/uit-knop van het apparaat of druk op de aan-/uit-knop van de afstandsbediening van het apparaat om het apparaat in de standby-modus te zetten. Het LED-indicatielampje gaat rood branden.

Haal de stekker uit het stopcontact als u het apparaat volledig wilt uitschakelen.

Let op:Als het apparaat niet in gebruik is (geen invoer), gaat het na 15 minuten automatisch in de standby-modus.Als het externe invoersignaal van het apparaat te zwak is, gaat het na 15 minuten automatisch in de standby-modus. Verhoog het invoersignaal van het aangesloten externe apparaat.

MODUS-selectieDruk op de SOURCE-knop op het apparaat of op de gewenste AUX – BT - HDMI ARC – OPTICAL – COAX-knop op de afstandsbediening van het apparaat om de gewenste invoermodus te selecteren.De geselecteerde modus wordt aangeduid met het LED-indicatielampje van het apparaat:• ROOD: standby-modus.• GROEN: AUX-modus.• GROEN KNIPPEREND: HDMI ARC-modus.

6

12

4

6

6

6

5

5

B

A

A

Page 28: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

NL 12

• BLAUW: BT-modus,• ORANJE: optische modus.• ORANJE KNIPPEREND: coax-modus.

Let op:Als het bron-apparaat in de BT-modus staat en de BT-verbinding niet langer actief of buiten bereik is, gaat het LED-indicatielampje blauw knipperen.Wanneer het bron-apparaat in de HDMI ARC-modus staat en er geen actief invoersignaal is, gaat het LED-indicatielampje groen knipperen.

Volumeregelaar• Druk op de knoppen volume + / - op het apparaat of de knop VOL+ of VOL- op de afstandsbediening van het apparaat om de geluidssterkte te regelen.• Om het geluid ui t te schakelen, drukt u op de MUTE-knop op de afstandsbediening. Druk opnieuw op de MUTE-knop of druk op de knop VOL+ of VOL- om het normale volume te herstellen.• Terwijl u het volume aanpast, gaat het LED-indicatielampje van de geselecteerde bronmodus snel knipperen.• Wanneer het maximum volume is bereikt en u probeert het nog verder te verhogen, gaat het LED-indicatielampje voor de geselecteerde bron eenmaal knipperen.• Wanneer het minimum volume is bereikt en u probeert het nog verder te verlagen, gaat het LED-indicatielampje van de geselecteerde bron eenmaal knipperen.

Een preset geluidsinstelling selecterenTijdens het afspelen, drukt u op de NEWS-, MOVIE-, MUSIC-knop op de afstandsbediening van het apparaat om de gewenste preset-geluidsinstelling te selecteren.

Preset-modi• MOVIE (aanbevolen voor het bekijken van films).• MUSIC (aanbevolen voor het luisteren naar muziek).• NEWS (aanbevolen voor het luisteren naar nieuws / gesprekken).

Tijdens het selecteren van een preset geluidsinstelling, knippert het LED-indicatielampje van de geselecteerde bron snel.

MODUS-selectie (AUX / COAXIAL / HDMI ARC / OPTICAL)Zorg ervoor dat het apparaat is aangesloten op de TV of een audio-apparaat.

Terwijl het apparaat AAN staat, drukt u op de SOURCE-knop van het apparaat, of op de AUX – HDMI ARC – OPTICAL - COAXIAL-knop op de afstandsbediening om de gewenste bron-modus te selecteren. Het LED-indicatielampje gaat branden in de kleur van de geselecteerde bron.U kunt de geluids- en afspeelfuncties rechtstreeks bedienen vanaf uw aangesloten audioapparaat.

C

C

E

DD

6

6

6

6

6

6

7

B4

6

Page 29: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

NL 13

Let op:Als er geen geluid is en het indicatielampje knippert, moet u de audio-instelling van de invoerbron (zoals TV, spelcomputer, DVD-speler) op uw audio-apparaat (zoals CD, DVD, Blu-ray) wijzigen naar "PCM".

Een BT-verbinding makenU moet uw BT-audiospeler koppelen met het apparaat wanneer u deze voor de eerste keer gebruikt.

• Druk op de knop SOURCE op het apparaat of op de BT -knop op de afstandsbediening van het apparaat om de BT-modus te selecteren. Het LED-indicatielampje gaat langzaam blauw knipperen. Het apparaat staat nu in de koppel-modus.• Houd uw BT-audiospeler tijdens het koppelingsproces binnen 1 m van het apparaat.• Laat uw BT-audiospeler naar compatibele BT-apparaten zoeken en selecteer ‘DO-SV-BTSB3’ in de lijst met gevonden apparaten. Zodra de koppeling tot stand is gebracht, hoort u de gesproken melding "paired" (gekoppeld) en gaat het LED-indicatielampje blauw branden.• Als u het apparaat niet kunt vinden in de lijst met beschikbare BT-verbindingen, kunt u het koppelingsproces handmatig starten. Houd de /PAIR-knop op de afstandsbediening van het apparaat ingedrukt. U hoort de gesproken melding "pairing" (koppeling vindt plaats) op het apparaat. Het LED-indicatielampje knippert snel blauw.• Selecteer ‘DO-SV-BTSB3’ uit de lijst met gevonden apparaten. Na de gesproken melding "paired" (gekoppeld), is de BT-verbinding tot stand gebracht en gaat het LED-indicatielampje blauw branden.• Als u een andere BT-audiospeler wilt verbinden met het apparaat, drukt u op de /PAIR-knop op de afstandsbediening om de actieve gekoppelde verbinding te verbreken, totdat u de gesproken melding “disconnected” (ontkoppeld) hoort.• Wanneer u muziek wilt afspelen en/of pauzeren op uw verbonden BT-apparaat, opent u uw mediaspeler en drukt u op 'play/pause’ (afspelen/pauzeren).• Om uw muziek te regelen, gebruikt u de knoppen play, track en volume op uw verbonden BT-audiospeler of gebruikt u de bedieningsknoppen op het bedieningspaneel van het apparaat of op de afstandsbediening.• Wanneer er een gekoppelde BT-audiospeler binnen bereik is, zal deze automatisch verbinding maken met het apparaat.

Let op:• Als er bij het maken van een BT-verbinding om een PIN-code wordt gevraagd, voer dan 0000 in.• Wanneer er een bestaande BT-verbinding is, houdt u de / PAIR-knop op de afstandsbediening ingedrukt om de koppelmodus opnieuw te activeren. De bestaande verbinding wordt onderbroken en u hoort de gesproken melding "disconnected" (losgekoppeld).• Wanneer een gekoppelde BT-audiospeler buiten bereik komt, wordt deze

B

C

C

4

6

6

6

6

6

C

Page 30: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

NL 14

losgekoppeld van het apparaat en hoort u de gesproken melding "disconnected" (losgekoppeld).• Als er niet binnen twee minuten een ander BT-apparaat met het apparaat wordt gekoppeld, zal de audiospeler de vorige verbinding/modus herstellen.

Naar muziek luisteren van een BT-audiospeler.U kunt naar uw muziek luisteren van de verbonden BT-audiospeler, als deze het Advanced Audio Distribution Profile (A2DP) ondersteunt.Het apparaat ondersteunt Audio Video Remote Control (AVRCP), wat betekent dat u de afstandsbediening van het apparaat kunt gebruiken om muziek af te spelen op de BT-audiospeler.• Om muziek van uw verbonden audiospeler a f te spelen, kunt u de bedieningsknoppen gebruiken van uw mediaspeler.• Om muziek op uw verbonden audiospeler af te spelen/te pauzeren, kunt u de /PAIR-knop op de afstandsbediening van het apparaat gebruiken.• Om de vorige of volgende track van uw verbonden audiospeler af te spelen, kunt u de knoppen & op de afstandsbediening van het apparaat gebruiken.

4) SPECIFICATIES• Voeding: 220-240 V AC – 50/60 Hz• Stroomverbruik: 30 W (< 0,5 W in standby-modus)• Stereospeakers: 50 W (2x 25 W)• Weerstand speakers: 2x 8 Ω• Frequentiereactie: 40 Hz – 20 kHz• BT-versie 4.2• Zendvermogen: klasse II• Maximaal overgebracht vermogen: < 5 dbm• Bedieningsafstand: tot 10 m• Frequentie: 2,4 Ghz. – 2,48 Ghz• BT-profielen: A2DP, AVRCP• Afstand afstandsbediening: 6m, hoek 30°• Afmetingen: 80 x 6 x 6 cm (L x B x H) horizontaal - soundbar• Afmetingen: 12,8 x 12,8 x 46,7 cm (L x B x H) verticaal – standaard/torenspeaker• Gewicht: 1,4 kg horizontaal - soundbar• Gewicht: 1,6 kg verticaal – standaard/torenspeaker

5) REINIGING EN ONDERHOUD

WaarschuwingVoordat u het apparaat gaat reinigen moet u het altijd uitschakelen, de stekker uit het stopcontact halen en volledig laten afkoelen.

Reiniging• Maak nooit gebruik van agressieve of schurende materialen, reinigingsalcohol of scherpe voorwerpen zoals harde borstels.

C

C

Page 31: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

Dit product is vervaardigd van kwalitatief hoogwaardige materialen en onderdelen die gerecycled en opnieuw gebruikt kunnen worden. Aan het eind van de levensduur van dit product, mag het niet worden meegegeven met het normale huishoudelijk afval, maar moet het naar een speciaal inzamelpunt worden gebracht voor het recyclen van elektrische en elektronische apparatuur. Dit wordt in de handleiding en op de verpakking weergegeven door de afvalcontainer met een kruis erdoor. De gebruikte grondstoffen kunnen worden gerecycled.

Door het recyclen van gebruikte apparatuur of grondstoffen, speelt u een belangrijke rol bij de bescherming van het milieu. U kunt bij de gemeente informeren waar het dichtstbijzijnde inzamelpunt is.

INSTRUCTIES VOOR DE BESCHERMING VAN HET MILIEU(AEEA, de richtlijn voor afgedankte elektrische en elektronische apparatuur)

NL 15

• Reinig de buitenkant en het stroomsnoer met een vochtige doek.• Droog vervolgens de buitenkant met een droge doek.

6) OPSLAG EN TRANSPORT• Voordat u het apparaat opbergt, moet u het eerst reinigen zoals beschreven in deze gebruikershandleiding. Bewaar het apparaat in de oorspronkelijke verpakking.• Berg het apparaat altijd op in een droge, goed geventileerde ruimte, buiten bereik van kinderen.• Bescherm het apparaat tijdens transport tegen trillingen en schokken.

Alle in deze handleiding vermelde informatie en specificaties kunnen zonder voorafgaande kennisgeving worden gewijzigd.

Page 32: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

A

BCDEFG

H

A B C

D E F

G H

MANUEL UTILISATEUR Model: DO-SV-BTSB3-B

Français

1) CONTENU DU PAQUET Barre de son BT amovible sans fil (droite & gauche) Télécommande Support (droite & gauche) Câble audio 3,5 mm – 3,5 mm Cordon d’alimentation Manuel utilisateur Supports pour montage mural, cheville, vis (2 pcs de chaque) Pieds en caoutchouc (3 pcs)

2) CONSIGNES DE SÉCURITÉ

Les précautions suivantes doivent toujours être observées avant l’utilisation de la “Barre de son BT amovible sans fil”, appelée par la suite ‘appareil’.

Informations générales• Lire attentivement le mode d’emploi et bien le conserver. Si l’appareil est donné à une autre personne, lui donner aussi ce mode d’emploi.• Utiliser cet appareil uniquement comme décrit dans ce mode d’emploi.• Cet appareil n’est pas un jouet. Le tenir hors de portée d’enfants et d’animaux domestiques.• Tous les avertissements sur le produit et dans les instructions d’utilisation doivent être respectés.

• AVERTISSEMENT ! Ne pas laisser traîner le matériel d’emballage. Cela pourrait former un danger pour les enfants. Risque de suffocation !

SOMMAIRE: 1) Contenu du paquet2) Consignes de sécurité3) Installation et utilisation du produit4) Spécification5) Nettoyage et entretien6) Stockage & transport

FR 01

Page 33: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

Électricité et chaleur• Avant l’utilisation, vérifier si la tension secteur est identique à la tension secteur indiquée sur l’appareil.• S’assurer d’avoir les mains sèches avant de toucher à l’appareil, le cordon d’alimentation ou la fiche.• Brancher la fiche dans une prise électrique facilement accessible à tout moment, et conçue pour 2 broches rondes (types C, E, F, J, K et L).• Ne pas faire fonctionner l’appareil à l’aide d’une minuterie externe ou d’un système de télécommande séparé. • AVERTISSEMENT ! Ne jamais recouvrir l’appareil & le cordon d’alimentation de tissus, rideaux ou autres matières, pour éviter la surchauffe et les éventuels risques d’incendie.• Pour réduire ou prévenir le risque de blessure corporelle, choc électrique, incendie ou dommage, ne jamais insérer d’objets en métal dans une des ouvertures de l’appareil, cordon d’alimentation ou prise de courant.• Pour retirer la fiche de la prise de courant, toujours tirer sur la fiche elle-même, jamais sur le cordon.• Contrôler régulièrement si le cordon d’alimentation n’est pas endommagé.• Ne jamais utiliser l’appareil si le cordon d’alimentation est endommagé, si l’appareil est tombé parterre ou s’il présente d’autres dommages.• Retirer la fiche de la prise de courant lorsque l’appareil n’est pas utilisé ou s’il est nettoyé.• S’assurer que le cordon d’alimentation ne puisse pas être piétiné ou coincé.• Ne pas laisser pendre le cordon d’alimentation sur des bords tranchants, et le garder éloigné d’objets chauds et de flammes nues.• Lorsque le cordon d’alimentation est branché, faire attention que personne ne puisse le tirer accidentellement ou trébucher sur celui-ci.• Retirer le cordon d’alimentation de la prise de courant lors d’orages ou lorsqu’il reste inutilisé pendant de longues périodes.• Cet appareil est un appareil électrique de Classe II ou à double isolation. Par conséquent, il n’a pas besoin d’être mis à la terre.

Batteries et chaleur• S’assurer que le compartiment à piles de la télécommande soit bien fermé.• Utiliser uniquement les piles mentionnées dans le compartiment à piles (CR2025 / 3V).• Respecter la polarité en plaçant les piles.• Ne pas court-circuiter les contacts à l’intérieur du compartiment à piles ni les piles.• Pour éviter les fuites, retirer les piles si la télécommande n’est pas utilisé pendant une longue période.• Les piles vides doivent être retirées de la télécommande pour éviter les fuites.• En cas de fuite d’une pile, éviter le contact du liquide de la pile avec la peau ou les yeux. En cas de contact, rincer abondamment à l’eau et consulter un médecin.• Tenir les piles hors de portée des enfants.• Ne pas exposer la télécommande à des sources de chaleur excessives comme le

FR 02

Page 34: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

FR 03

feu ou la lumière directe du soleil (y compris les amplificateurs).• Ne pas écraser, percer ou démonter la télécommande, cela pourrait endommager la pile.• L’endommagement et/ou le transpercement du boîtier de la télécommande peut provoquer une explosion ou un incendie !• Ne pas jeter la télécommande ou la pile au feu car elle pourrait exploser !• Ne pas jeter les piles dans les ordures ménagères. Pour se débarrasser des piles, les remettre au centre de recyclage local. Contacter les autorités locales pour plus de détails.

Utilisation• Cet appareil est prévu pour un usage domestique ou similaire.• Utiliser l’appareil uniquement à l’intérieur, dans des endroits secs et pas à proximité d’eau, autres liquides ou humidité.• Éviter les endroits soumis à des vibrations, la poussière excessive, le froid ou l’humidité.• Ne pas l’installer près de sources de chaleur telles que les radiateurs, diffuseurs d’air chaud, cuisinières, ou autres appareils (y compris les amplificateurs) générant de la chaleur. • Ne pas exposer l’appareil à la lumière directe du soleil, une humidité excessive ou un milieu corrosif.• Ne pas bloquer les ouvertures de ventilation.• La distance minimale autour de l’appareil pour une ventilation suffisante est de 5 cm.• La ventilation ne doit pas être gênée en recouvrant les ouvertures de ventilation avec des articles tels que des journaux, nappes de table, rideaux, etc.• Ne pas exposer l’appareil à des contraintes mécaniques.• Ne pas utiliser ou stocker l’appareil dans un endroit soumis à une forte électricité statique ou des champs magnétiques.• Une utilisation inappropriée e l’appareil peut endommager le produit.• Manipuler l’appareil avec précaution. Tout choc ou chute, même de faible hauteur, peut endommager l’appareil.• Ne pas utiliser l’appareil s’il est tombé dans de l’eau ou tout autre liquide.• Ne pas ouvrir le boîtier car cela pourrait provoquer un choc électrique. • Ne pas essayer de démonter ou de réparer l’appareil, ni le modifier de quelque manière que ce soit.• L’appareil doit être révisé s’il a été endommagé de quelque manière que ce soit, par exemple si le cordon d’alimentation est endommagé ; si un liquide a été renversé ; si des objets sont tombés dans l’appareil ; s’il a été exposé à la pluie ou à l’humidité; s’il est tombé ou s’il ne fonctionne pas normalement. • AVERTISSEMENT ! Pour réduire le risque d’incendie ou de choc électrique, protéger l’appareil de ruissellement ou d’éclaboussures d’eau, et le tenir à l’écart d’objets remplis de liquides, tels que des vases. De tels objets ne doivent pas être placés sur l’appareil ou à proximité. • Ne pas utiliser de nettoyants abrasifs pour nettoyer l’appareil.

Page 35: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

FR 04

• Ne pas utiliser d’objets insolites pour nettoyer l’appareil.

• AVERTISSEMENT ! Pour prévenir d’éventuels dommages auditifs, ne pas écouter à un volume élevé pendant une longue période.

3) INSTALLATION ET UTILISATION DE L’APPAREILOuvrir l’emballage avec précaution avant d’en sortir l’appareil. S’assurer que l’appareil soit complet et en bon état. S’il y a des composants manquants ou endommagés, contacter le fournisseur et ne pas utiliser le produit. Conserver l’emballage ou le recycler conformément aux réglementations locales.

Parties & Fonctions appareil Haut-parleurs Capteur de télécommande Vis pour support mural Bouton SRC, sélection de source d’entrée Bouton marche/arrêt (mode veille) Indicateurs LED Boutons VOL+/VOL-, augmenter/baisser le volume Port AUX (jack d’entrée audio 3,5 mm) Port coaxial Port de sortie OPTICAL Port HDMI ARC Prise AC

12345

9101112

678

1 12

3

4 5 9 10 11 126 7 8

Page 36: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

FR 05

Parties & Fonctions télécommande Bouton marche/arrêt (mode veille) Boutons sélection de source d’entrée (AUX-BT-HDMI-OPTICAL-COAXIAL) Boutons VOL+/VOL-, augmenter/baisser le volume.Boutons & , passer au numéro précédent/suivant en mode BT. Bouton /PAIR, jouer/pauser répéter en mode BT & appuyer et maintenir enfoncé pour activer la fonction de couplage en mode BT ou déconnecter un appareil BT déjà couplé. Bouton MUET, couper ou rétablir le son Bouton EQ, égaliseur, sélection d’un effet audio prédéfini

Configuration initiale télécommandeLa télécommande fournie permet de commander de l’appareil à distance. Même si la télécommande est utilisée dans la plage effective (<6m), l’utilisation de la télécommande pourrait s’avérer impossible en cas d’obstacles entre l’appareil et la télécommande. Si vous utilisez la télécommande à proximité d’autres produits générateurs de rayons infrarouges, ou si d’autres télécommandes util isant des rayons infrarouges sont utilisées à proximité de l’appareil, la té lécommande pourrai t ne pas fonct ionner correctement. Les autres produits pourraient également ne pas fonctionner correctement.

Première utilisation :La télécommande a une pile lithium CR2025 pré-installée. Retirer la languette de protection pour activer la pile de la télécommande.

Insérer une pile dans la télécommande :1) Enfoncer le levier de sécurité2) Sortir le support à pile et retirer la pile usagée. 3) Placer une nouvelle pile CR2025 dans le support à pile en respectant la polarité (+/-) indiquée. 4) Remettre en place le support à pile.

Mise en place / montage de l’appareilL’appareil peut être placé verticalement sur son support, horizontalement sur une table ou un meuble télé, ou bien être fixé au mur.

AB

C

DE

1 2

43

A

B

C

D

E

Page 37: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

FR 06

A. Montage sur support (vertical)Placer l’appareil sur le support et le tourner dans le sens inverse des aiguilles d’une montre jusqu’à ce qu’il soit solidement fixé au support.Connecter les câbles du support les uns aux autres.

B. Si le téléviseur est posé sur une table ou un meuble télé, l’appareil peut être placé directement devant le téléviseur, bien centré avec l’écran du téléviseur.Pour éviter et absorber les vibrations, installer les pieds en caoutchouc fournis au bas de l’appareil.Installer les pieds en caoutchouc :Note : S’assurer que la surface soit propre avant de coller les pieds en caoutchouc au bas de l’appareil.1. Tourner l’appareil sens dessus dessous.2. Retirer la feuille de protection des pieds en caoutchouc.3. Coller les pieds en caoutchouc au bas de l’appareil comme indiqué sur l’illustration ci-dessous.

Note : L’appareil augmentera un peu en hauteur en raison de la mise en place des pieds.

Page 38: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

FR 07

C. Si le téléviseur est fixé au mur, l’appareil peut également être fixé au mur, bien centré en dessous du téléviseur.

L’installation doit être faite par un technicien qualifié. Une installation incorrecte peut causer des blessures graves et des dommages.Si vous avez l’intention d’installer vous-même cet appareil, vous devez contrôler s’il n’y a pas d’installations telles que des câbles électriques et des tuyaux dans le mur. L’installateur doit aussi vérifier si le mur pourra supporter en toute sécurité la charge totale de l’appareil et des supports muraux.Des outils supplémentaires (non inclus) sont nécessaires pour l’installation.Ne pas trop serrer les vis.Utiliser un détecteur électronique pour contrôler le mur avant de percer les trous et l’installation. 1) Retirer les vis de l’appareil.2) Fixer les supports muraux à l’appareil en utilisant les vis retirées de l’appareil.3) Percer 2 trous parallèles (Ø 3-8 mm selon le type de mur) dans le mur. La distance entre les trous doit être 767 mm.4) Enfoncer fermement 1 cheville dans chaque trou du mur si nécessaire.5) Insérer une vis dans chaque cheville ou trou. Laisser 5 mm d’espace entre le mur et la tête de la vis. Soulever l’appareil avec les supports muraux fixés et les placer sur la tête des vis.

Page 39: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

FR 08

ConnexionsPort HDMI ARCVous pouvez connecter l’appareil à tout AV et téléviseur ayant un port HDMI ARC (Audio Return Channel).

La fonction ARC permet d’envoyer l’audio de votre téléviseur compatible avec ARC à votre appareil à l’aide d’une seule connexion HDMI. Pour utiliser la fonction ARC, il faut que le téléviseur soit équipé de HDMI-CEC et ARC.S’ils sont connectés correctement, vous pouvez utiliser la télécommande de votre téléviseur pour régler le volume de l’appareil connecté.

Page 40: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

FR 09

Connecter le câble HDMI (non inclus) entre le port HDMI de l’appareil et le port HDMI (ARC) de votre téléviseur (HDMI 1.4 minimum).Puis appuyer sur le bouton SOURCE de l’appareil jusqu’à ce que le voyant LED clignote en vert ou appuyer sur le bouton HDMI/ARC de la télécommande de l’appareil pour sélectionner le mode source HDMI ARC. Le voyant LED clignotera en vert.

Merci de noter :• Votre téléviseur doit soutenir les fonctions HDMI-CEC et ARC. HDMI-CEC et ARC doivent être en position ON sur votre téléviseur.• La méthode de réglage de HDMI-CEC et ARC peut varier selon le téléviseur que vous avez. Pour plus de détails sur la fonction ARC, reportez-vous au manuel du téléviseur.• Seuls les câbles HDMI 1.4 peuvent soutenir la fonction ARC !

Port optiqueVous pouvez connecter l’appareil à tout AV et téléviseur ayant un port optique.Le port optique permet d’envoyer l’audio de votre téléviseur à votre appareil à l’aide d’une connexion optique. Pour utiliser la fonction optique, il faut que le téléviseur soit équipé d’un port optique.

Enlever le bouchon protecteur du port optique ; puis connecter un câble optique (non inclus) entre le port de sortie optique du téléviseur et le port optique de l’appareil.Puis appuyer sur le bouton SOURCE de l’appareil jusqu’à ce que le voyant LED s’allume en orange ou appuyer sur le bouton OPTICAL de la télécommande de l’appareil pour sélectionner le mode optique. Le voyant LED s’allumera en orange.

Merci de noter :S’il n’y a pas de son émis, et si le voyant clignote, s’assurer que le réglage audio de la source d’entrée (p.ex. téléviseur, console de jeu, lecteur DVD, etc.) soit changé en “PCM” avec sortie optique et coaxiale.

Port coaxialVous pouvez connecter l’appareil à tout port de sortie coaxial AV et du téléviseur via le port coaxial.Le port coaxial permet l’audio de votre téléviseur à votre appareil à l’aide d’une

11

10

4

4

6

6

6

6

5

B

B

Page 41: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

FR 10

Connecter un câble coaxial entre le port de sortie coaxial du téléviseur et le port coaxial de l’appareil.Puis appuyer sur le bouton SOURCE de l’appareil jusqu’à ce que le voyant LED clignote en orange ou appuyer sur le bouton COAXIAL de la télécommande de l’appareil pour sélectionner le mode coaxial. Le voyant LED clignote en orange.

Port AUXVous pouvez connecter l’appareil à tout AV et téléviseur ayant un port AUX.Le port AUX permet l’audio de votre téléviseur à votre appareil à l’aide d’une connexion AUX (3,5 mm). Pour utiliser la fonction AUX, il faut que le téléviseur soit équipé d’un port AUX.

connexion coaxiale. Pour utiliser la fonction coaxiale, il faut que le téléviseur soit équipé d’un port coaxial.

Connecter un câble AUX entre le port de sortie AUX du téléviseur et le port AUX de l’appareil.Puis appuyer sur le bouton SOURCE de l’appareil jusqu’à ce que le voyant LED s’allume en vert ou appuyer sur le bouton AUX de la télécommande de l’appareil pour sélectionner le mode AUX. Le voyant LED s’allumera en vert.

A. Utiliser un câble audio RCA vers 3,5 mm (inclus) pour connecter le port de sortie audio du téléviseur au port AUX de l’appareil.B. Utiliser un câble audio 3,5 mm vers 3,5 mm (inclus) pour connecter un casque audio externe au port AUX de l’appareil.

4 69

6B

4 6

8

8

6B

Page 42: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

FR 11

Raccordement électriqueAvant de brancher le cordon d’alimentation AC, s’assurer d’avoir réalisé toutes les autres connexions.• Avant l’utilisation, vérifier si la tension secteur est identique à la tension secteur indiquée sur l’appareil.• Insérer la fiche dans une prise électrique.• Insérer la fiche du cordon d’alimentation dans la prise AC de l’appareil .• L’appareil est alors en mode veille. Le voyant LED du mode veille s’allumera en rouge.

Bouton Marche/Arrêt – Mode veilleAppuyer sur le bouton de mise en marche de l’appareil ou appuyer sur le bouton de la télécommande de l’appareil pour l’allumer.Le voyant LED du dernier mode source utilisé s’allumera.Appuyer sur le bouton de mise en marche de l’appareil ou appuyer sur le bouton de la télécommande de l’appareil pour mettre l’appareil en mode veille. Le voyant LED s’allumera en rouge.

Débrancher la fiche de la prise électrique si vous souhaitez éteindre entièrement l’appareil.

Merci de noter :Si l’appareil n’est pas utilisé (aucune entrée), il se mettra automatiquement en mode veille après 15 minutes.Si le signal d’entrée externe de l ’apparei l est trop faible, i l se mettra automatiquement en mode veille après 15 minutes. Augmenter le signal d’entrée de l’appareil externe connecté.

Sélection de MODEAppuyer sur le bouton SOURCE de l’appareil, ou sur le bouton souhaité AUX – BT - HDMI ARC – OPTICAL – COAXIAL de la télécommande de l’appareil pour sélectionner le mode d’entrée souhaité.Le mode sélectionné sera affiché au moyen de le voyant LED de l’appareil :• ROUGE : mode veille.• VERT : mode AUX.• VERT CLIGNOTANT : mode HDMI ARC.• BLEU : mode BT.

6

6

6

5

5

A

A

12

4

6

B

Page 43: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

FR 12

• ORANGE : mode optique.• ORANGE CLIGNOTANT : mode coaxial.

Merci de noter :Si l’appareil est en mode BT, et si la connexion BT n’est plus active ou hors de portée, le voyant LED clignotera en bleu.Si l’appareil est en mode HDMI ARC, et s’il n’y a pas de signal d’entrée actif, le voyant LED clignotera en vert.

Réglage de volume• Appuyer sur les boutons volume + & - de l’appareil, ou les boutons VOL+ & VOL- de la télécommande de l’appareil pour régler le volume.• Pour couper le son, appuyer sur le bouton MUTE de la télécommande. Appuyer de nouveau sur le bouton MUTE ou appuyer sur le bouton VOL+ ou VOL- pour rétablir le son.• Pendant le réglage du son, le voyant LED du mode source sélectionné clignotera rapidement.• Lorsque le niveau de volume atteint son maximum, et que vous essayez de l’augmenter davantage, le voyant LED de la source sélectionnée clignotera une seule fois.• Lorsque le niveau de volume atteint son minimum, et que vous essayez de le baisser davantage, le voyant LED de la source sélectionnée clignotera une seule fois.

Sélectionner un effet de son prédéfiniEn cours de fonctionnement, appuyer sur les bouton NEWS, MOVIE, MUSIC de la télécommande de l’appareil pour sélectionner les égaliseurs prédéfinis souhaités.

Modes prédéfinis• Movie (recommandé pour regarder un film).• Music (recommandé pour écouter de la musique).• NEWS (recommandé pour écouter des nouvelles / discussions).

Lors de la sélection d’un effet de son prédéfini, le voyant LED de la source sélectionnée clignote rapidement.

Sélection de MODE (AUX / COAXCIAL / HDMI ARC / OPTICAL)S’assurer que l’appareil soit connecté à un téléviseur ou appareil audio.

Pendant que ’appareil est en position ON, appuyer sur le bouton SOURCE de l’appareil, ou sur le bouton AUX – HDMI ARC – OPTICAL - COAXIAL de la télécommande de l’appareil pour sélectionner le mode d’entrée souhaité. Le voyant LED s’allumera en la couleur de la source sélectionnée.Vous pouvez régler le son et répéter des numéros directement à partir de votre appareil audio connecté.

4

6

B

C

C

E

DD

6

6

6

6

6

6

7

Page 44: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

FR 13

Merci de noter :S’il n’y a pas de son émis, et si le voyant du mode source sélectionné clignote, s’assurer que le réglage audio de la source d’entrée (p.ex. téléviseur, console de jeu, lecteur DVD, etc.) soit changé en “PCM” sur votre appareil audio (p.ex. CD, DVD, Blu-ray).

Connexion BTVous devrez coupler votre lecteur audio BT avec l’appareil lorsque vous l’utilisez pour la première fois.

• Appuyer sur le bouton SOURCE de l’appareil, ou le bouton BT de la télécommande de l’appareil pour sélectionner le mode BT. Le voyant LED clignotera lentement en bleu. L’appareil est alors en mode de couplage.• Tenir votre lecteur audio BT à moins d’1 m (3 ft) de l’appareil pendant le processus de couplage.• Laisser votre lecteur audio BT chercher des périphériques BT compatibles, et sélectionner “DO-SV-BTSB3” dans la liste des périphériques trouvés. Une fois le couplage réussi, vous entendrez une voix dire “paired” et le voyant LED s’allumera en bleu.• Si vous ne trouvez pas l’appareil sur la liste de connexions BT disponibles, lancez le processus de couplage manuellement. Appuyer et maintenir enfoncé le bouton /PAIR de la télécommande. Vous entendrez la voix dire “pairing” dans l’appareil. Le voyant LED clignotera rapidement en bleu.• Sélectionner “DO-SV-BTSB3” dans la liste des périphériques trouvés. Après avoir entendu “paired”, la connexion BT aura été établie et le voyant LED s’allumera en bleu.• Pour connecter un autre lecteur audio BT à l’appareil, appuyer sur le bouton /PAIR de la télécommande pour déconnecter la connexion active couplée, jusqu’à ce que vous entendiez la voix dire “disconnected”.• Pour jouer et/ou pauser de la musique sur votre lecteur audio BT connecté, ouvrir votre lecteur multimédia et appuyer sur jouer/pauser.• Pour contrôler votre musique, utiliser les boutons jouer, numéro & volume de votre lecteur audio BT connecté, ou utiliser les “boutons de contrôle” du panneau de contrôle de l’appareil ou de la télécommande.• Si un lecteur audio BT couplé est à proximité, il se connectera automatiquement à l’appareil.

Merci de noter :• Si un code PIN est requis pour établir une connexion BT, entrer 0000.• S’il y a une connexion BT existante, appuyer et maintenir enfoncé le bouton /PAIR de la télécommande pour activer de nouveau le mode de couplage. La connexion existante sera interrompue et vous entendrez la voix dire “disconnected”.• Si un lecteur audio BT couplé s’éloigne trop, il sera déconnecté de l’appareil et vous entendrez la voix dire “disconnected”.• Si aucun autre appareil BT n’est couplé à l’appareil dans les deux minutes, le

B

C

C

4

6

6

6

6

6

C

Page 45: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

FR 14

lecteur rétablira sa connexion/son mode précédent.

Écouter de la musique d’un lecteur audio BT.Vous pouvez écouter votre musique du lecteur audio BT connecté si celui-ci prend en charge le profil de distribution audio avancé (A2DP).L’appareil prend en charge le contrôle à distance audio-vidéo (AVRCP), ce qui signifie que vous pouvez utiliser la télécommande de l’appareil pour jouer la musique du lecteur audio BT.• Pour jouer la musique de votre lecteur audio connecté, vous pouvez utiliser les boutons de contrôle de votre lecteur multimédia.• Pour jouer/pauser la musique de votre lecteur audio connecté, vous pouvez utiliser le bouton /PAIR de la télécommande de l’appareil.• Pour passer au numéro suivant ou précédent de votre lecteur audio connecté, vous pouvez utiliser le bouton & de la télécommande de l’appareil.

4) SPÉCIFICATIONS• Puissance d’entrée : 220-240 Vac – 50/60 Hz• Consommation d‘énergie : 30 W (<0.5 W en mode veille)• Haut-parleurs stéréo : 50 W (2x 25 W)• Impédance haut-parleurs : 2x 8 Ω• Réponse en fréquence : 40 Hz – 20 kHz• BT version 4.2• Puissance de transmission : classe II• Puissance maximale transmise : < 5 dbm• Distance d’opération : jusqu’à 10 m• Fréquence : 2.4 Ghz. – 2.48 Ghz• Profils BT : A2DP, AVRCP• Portée de la télécommande : 6 m, angle 30°• Dimensions : 80 x 6 x 6 cm (L x l x H) barre de son horizontale• Dimensions : 12,8 x 12,8 x 46,7 cm (L x l x H) support/haut-parleur vertical• Poids : 1,4 kg. barre de son horizontale• Poids : 1,6 kg support/haut-parleur vertical

5) NETTOYAGE ET ENTRETIEN

AvertissementAvant de nettoyer l’appareil, toujours le mettre en position OFF, le débrancher de la prise de courant et le laisser entièrement refroidir.

Nettoyage• Ne jamais utiliser de détergents agressifs ou abrasifs, d’alcool à brûler ou des objets tranchants tels qu’une brosse dure.• Nettoyer l’extérieur du boitier et le cordon d’alimentation avec un chiffon humide.• Puis sécher l’extérieur avec un chiffon sec.

C

C

Page 46: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

6) STOCKAGE & TRANSPORT• Lorsque l’appareil est stocké, il doit d’abord être nettoyé conformément à la description dans ce manuel utilisateur. L’appareil doit être stocké dans son emballage d’origine.• Stocker toujours l’appareil dans un endroit sec et bien aéré et hors de portée des enfants.• Protéger l’appareil des vibrations et chocs pendant le transport.

Tous contenus et spécifications mentionnés dans ce manuel peuvent être modifiés sans préavis.

Votre produit a été fabriqué en utilisant des matériaux de haute qualité et des composants qui peuvent être recyclés et réutilisés. À la fin de sa durée de vie, ce produit ne doit pas être jeté avec les ordures ménagères ordinaires, mais il doit être remis à un point de collecte spécial pour le recyclage des équipements électriques et électroniques. Ceci est indiqué dans le manuel utilisateur et sur l’emballage par un conteneur de déchets marqué d’un symbole de croix. Les matières premières utilisées sont appropriées pour le recyclage.

Par le recyclage des appareils usagés ou des matières premières, vous apportez une contribution importante à la protection de notre environnement. Informez-vous en local sur le point de collecte le plus proche.

INSTRUCTIONS POUR LA PROTECTION DE L’ENVIRONMENT(DEEE, la directive concernant les déchets d’équipements électriques et électroniques)

FR 15

Page 47: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

A B C

D E F

G H

BEDIENUNGSANLEITUNGModel: DO-SV-BTSB3-B

Deutsch

1) LIEFERUMFANG Abnehmbare drahtlose BT-Soundbar (links & rechts) Fernbedienung Ständer (links & rechts) Audiokabel 3,5 mm – 3,5 mm Netzkabel Bedienungsanleitung Wandhalter, Dübel, Schraube (je 2 Stück) Gummifüße (3 Stück)

2) SICHERHEITSHINWEISE

Treffen Sie immer die folgenden grundlegenden Vorsichtsmaßnahmen, bevor Sie die abnehmbare drahtlose BT-Soundbar (im Folgenden als „Gerät“ bezeichnet) verwenden.

Allgemeine Informationen• Lesen Sie die Hinweise für den Gebrauch sorgfältig durch und bewahren Sie sie sicher auf. Wenn Sie dieses Gerät an andere Personen weitergeben, geben Sie bitte auch diese Bedienungsanleitung mit.• Verwenden Sie dieses Gerät nur entsprechend der Anleitungen in dieser Bedienungsanleitung.• Das Gerät ist kein Spielzeug. Von Kindern und Haustieren fernhalten.• Alle Warnungen auf dem Gerät und in der Bedienungsanweisung müssen befolgt werden. • WARNUNG! Verpackungsmaterial nicht fahrlässig herumliegen lassen. Kinder könnten dieses als gefährliches Spielmaterial verwenden. Erstickungsgefahr!

INHALT1) Lieferumfang2) Sicherheitsanweisungen3) Installation und Verwendung des Produkts4) Technische Daten5) Pflege und Reinigung6) Aufbewahrung und Transport

DE 01

A

BCDEFGH

Page 48: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

Elektrischer Strom und Wärme• Prüfen Sie vor der Inbetriebnahme, ob die Netzspannung mit der am Gerät angegebenen Netzspannung übereinstimmt.• Vergewissern Sie sich, dass Ihre Hände trocken sind, bevor Sie das Gerät, das Netzkabel oder den Stecker berühren.• Stecken Sie den Netzstecker in eine jederzeit leicht erreichbare Steckdose mit einer Buchse für 2 runde Stifte (Typ C, E, F, J, K und L).• Betreiben Sie das Gerät nicht mit einer externen Zeitschaltuhr oder einer separaten Fernbedienung.

• WARNUNG! Decken Sie das Gerät niemals mit Lappen, Vorhängen oder anderen Materialien ab, damit es nicht zu Überhitzung oder Brandgefahren kommt.• Niemals Gegenstände aus Metall in eine Öffnung des Geräts, des Netzkabels oder der Netzanschlussbuchse stecken: Dies kann zu Verletzungen, Stromschlag, Feuer oder Schäden am Gerät führen.• Wenn Sie den Netzstecker aus der Steckdose ziehen: Ziehen Sie immer am Netzstecker, niemals am Netzkabel.• Überprüfen Sie das Netzkabel regelmäßig auf Schäden.• Verwenden Sie das Gerät nicht, wenn das Netzkabel Anzeichen von Schäden aufweist, wenn das Gerät auf den Boden gefallen ist oder andere Anzeichen von Schäden aufweist.• Ziehen Sie den Netzstecker aus der Steckdose, wenn das Gerät nicht benutzt wird oder es gereinigt wird.• Stellen Sie sicher, dass nicht auf das Netzkabel getreten oder es eingeklemmt werden kann.• Das Netzkabel darf nicht über scharfen Kanten hängen. Halten Sie es von heißen Gegenständen und offenem Feuer fern.• Achten Sie beim Einstecken des Netzkabels darauf, dass das Kabel nicht versehentlich herausgezogen oder über es gestolpert werden kann.• Ziehen Sie das Netzkabel bei Gewitter oder bei längerer Nichtbenutzung aus der Steckdose.• Dieses Gerät ist ein elektrisches Gerät der Klasse ll bzw. doppelt isoliert. Darum braucht es nicht elektrisch geerdet zu werden.

Batterien und Wärme• Vergewissern Sie sich, dass das Batteriefach an der Fernbedienung sicher eingerastet ist.• Verwenden Sie nur die im Batteriefach angegebenen Batterien (CR2025 / 3 V).• Achten Sie beim Einlegen der Batterien auf die richtige Polung.• Schließen Sie keine Kontakte im Batteriefach oder an den Batterien kurz.• Damit die Batterie nicht ausläuft, sollten Sie die Batterie aus der Fernbedienung nehmen, wenn sie längere Zeit nicht benutzt wird.• Leere Batterien sollten aus der Fernbedienung genommen werden, um ihr Auslaufen zu vermeiden.• Wenn die Batterie ausläuft, darf Batterieflüssigkeit nicht in Kontakt mit Haut oder

DE 02

Page 49: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

Augen kommen. Falls es doch geschehen ist, den betroffenen Bereich mit viel Wasser spülen und einen Arzt aufsuchen.• Halten Sie die Batterien von Kindern fern.• Setzen Sie die Fernbedienung niemals starken Wärmequellen wie Feuer oder übermäßigem Sonnenlicht (einschließlich Verstärkern) aus.• Das Gerät nicht zerdrücken, durchstechen oder auseinandernehmen: Es kann die Batterie beschädigen.• Die Beschädigung der Fernbedienung und/oder das Einstechen in sie können zu Explosion oder Brand führen!• Werfen Sie die Fernbedienung oder die Batterie nicht in ein Feuer: Sie kann explodieren!• Entsorgen Sie Batterien nicht im Hausmüll. Die Batterien können in Ihrem örtlichen Recyclingzentrum entsorgt werden. Erkundigen Sie sich bei Ihrer Kommunalverwaltung nach den Einzelheiten.

Verwendung• Dieses Gerät ist für den häuslichen Gebrauch oder eine vergleichbare Nutzung bestimmt.• Verwenden Sie das Gerät nur in Innenräumen, in trockenen Bereichen und nicht in der Nähe von Wasser, anderen Flüssigkeiten oder Feuchtigkeit.• Vermeiden Sie Orte, die Vibrationen, sehr viel Staub, Kälte oder Feuchtigkeit ausgesetzt sind.• Nicht in der Nähe von Wärmequellen wie Heizkörpern, Heizungen, Öfen oder anderen Geräten (einschließlich Verstärkern) installieren, die Wärme erzeugen.• Setzen Sie das Gerät nicht dem direkten Sonnenlicht, hoher Feuchtigkeit oder korrosiven Umgebungen aus.• Blockieren Sie keine Lüftungsöffnungen.• Der Mindestabstand rund um das Gerät für eine ausreichende Belüftung beträgt 5 cm.• Die Belüftung darf nicht durch Abdecken von Belüftungsöffnungen mit Gegenständen wie Zeitungen, Tischdecken, Vorhängen usw. behindert werden.• Lassen Sie keine mechanischen Kräfte auf das Gerät einwirken.• Verwenden oder lagern Sie das Gerät nicht in einer Umgebung mit starken elektrostatischen Ladungen oder starken Magnetfeldern.• Eine missbräuchliche Verwendung kann das Produkt beschädigen.• Bitte gehen Sie vorsichtig mit dem Gerät um. Aufpralle oder Stürze, selbst aus kleiner Höhe, können das Gerät beschädigen.• Verwenden Sie das Gerät nicht, wenn es in Wasser oder in eine andere Flüssigkeit gefallen ist.• Öffnen Sie das Gehäuse nicht, da sonst die Gefahr eines Stromschlags besteht.• Das Gerät nicht demontieren, reparieren oder auf irgendeine Art und Weise verändern.• Das Gerät muss gewartet werden, wenn es in irgendeiner Weise ist wurde, z.B. das Netzkabel beschädigt ist, Flüssigkeit auf dem Gerät verschüttet wurde, Gegenstände hineingefallen sind, es Regen oder Feuchtigkeit ausgesetzt war, es heruntergefallen

DE 03

Page 50: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

1 12

3

ist oder nicht normal funktioniert.

• WARNUNG! Um das Risiko von Brand oder Stromschlag zu reduzieren, muss das Gerät vor Wassertropfen und Wasserspritzern geschützt werden. Halten Sie es von Objekten, die mit Flüssigkeiten gefüllt sind (wie Vasen) fern. Solche Objekte sollten nicht auf oder neben das Gerät gestellt werden.• Zur Reinigung des Geräts keine groben oder scheuernden Reinigungsmittel verwenden.• Das Gerät nicht mit Fremdkörpern reinigen.

• WARNUNG! Zur Vorbeugung vor Hörschäden sollten Sie nicht längere Zeit bei hoher Lautstärke hören.

3) INSTALLATION UND VERWENDUNG DES GERÄTSÖffnen Sie die Verpackung vorsichtig, bevor Sie das Gerät herausnehmen. Stellen Sie sicher, dass das Gerät vollständig und unbeschädigt ist. Sollten Teile fehlen oder beschädigt sein, kontaktieren Sie den Hersteller und verwenden Sie das Produkt nicht. Die Verpackung aufbewahren oder in Übereinstimmung mit den örtlichen Vorschriften recyceln.

Teile & Merkmale des Geräts

Lautsprecher Fernbedienungssensor Schrauben für Wandhalter SRC-Taste, die Eingangsquelle wählen Taste EIN/AUS (Standby-Modus) LED-Anzeigen Tasten VOL+/VOL-: Lautstärke verringern/erhöhen AUX-Anschluss (Audioeingangsbuchse, 3,5 mm) Koaxialer Anschluss OPTISCHER Ausgangsanschluss HDMI-ARC-Anschluss AC-Steckdose

DE 04

12345

9101112

678

Page 51: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

4 5 9 10 11 126 7 8

A

B

C

D

E

Teile und Funktionen der Fernbedienung

Taste EIN/AUS (Standby-Modus) Taste zur Auswahl der Eingangsquelle (AUX-BT-HDMI-OPTICAL-COAXIAL) Tasten VOL+/VOL-: Lautstärke verringern/erhöhen & -Tasten: im BT-Modus zum vorherigen/nächsten Titel springen. Taste /PAIR, Wiedergabe/Pause im BT- Modus & drücken und halten, um die Pairing-Funktion im BT-Modus zu aktivieren, oder das vorhandene gepaarte BT-Gerät zu trennen. Taste Stummschaltung: Ton stummschalten oder wieder einschalten Taste Music EQ: Equalizer, Auswahl eines v oreingestellten Toneffekts

Erste Inbetriebnahme der FernbedienungMit der mitgelieferten Fernbedienung kann das Gerätfernbedient werden.Auch wenn die Fernbedienung in ihrer Reichweite (<6 m) verwendet wird,ist unter Umständen keine Fernbedienung möglich, wenn sich Hindernissezwischen Gerät und Fernbedienung befinden.Das Gerät funktioniert unter Umständen fehlerhaft, wenn die Fernbedienung in der Nähe vonanderen Produkten, die Infrarotstrahlen erzeugen, v e r w e n d e t w i r d , o d e r w e n n a n d e r e I n f r a r o t -Fernbedienungen in der Nähe des Geräts verwendet werden. Umgekehrt können auch die anderen Produkte fehlerhaft funktionieren.

Erste Inbetriebnahme:In der Fernbedienung ist eine Lithium-Batterie (CR2025) vorinstalliert.

DE 05

ABC

D

E

Page 52: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

1 2

43

Entfernen Sie die Schutzlasche, um die Batterie in der Fernbedienung zu aktivieren.

Einlegen der Batterie in die Fernbedienung:1) Drücken Sie auf die Sicherheitsverriegelung.2) Ziehen Sie das Batteriefach heraus und nehmen Sie die alte Batterie heraus.3) Legen Sie eine neue Batterie (CR2025) richtig gepolt (+/-) in das Batteriefach ein.4) Setzen Sie das Batteriefach wieder ein.

Aufstellung / Befestigung des GerätesDas Gerät kann senkrecht auf seinem Ständer oder waagerecht auf einem Tisch oder TV-Ständer stehen, oder es kann an einer Wand befestigt werden.

A. Standmontage (senkrecht)Setzen Sie das Gerät auf den Ständer und drehen Sie es gegen den Uhrzeigersinn, bis es fest mit dem Ständer verbunden ist.Verbinden Sie die Kabel des Ständers miteinander.

B. Wenn Ihr Fernseher auf einem Tisch oder TV-Ständer steht, können Sie das Gerät direkt vor dem Fernseher mittig zum Bildschirm aufstellen.Um Vibrationen zu vermeiden und zu absorbieren, bringen Sie die mitgelieferte Gummifüße unter dem Gerät an.So bringen Sie die Gummifüße an:Hinweis: Vergewissern Sie sich, dass der Untergrund sauber ist, bevor Sie den Gummifuß auf den Geräteboden kleben.DE 06

Page 53: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

1. Stellen Sie das Gerät auf den Kopf.2. Ziehen Sie das Trägerpapier vom Gummifuß ab.3. Kleben Sie den Gummifuß auf die Unterseite des Geräts, wie in der Abbildung unten gezeigt.

Hinweis: Das Gerät wird durch das Anbringen der Füße etwas höher.

C. Wenn Ihr Fernseher an der Wand befestigt ist, können Sie das Gerät mittig an der Wand direkt unter dem Fernsehbildschirm montieren.

Die Installation darf nur von qualifiziertem Personal durchgeführt werden. Falscher Zusammenbau kann schwere Verletzungen und Schäden zur Folge haben.Wenn Sie dieses Gerät selbst installieren möchten, müssen Sie prüfen, ob in der Wand Leitungen (z.B. Elektrokabel oder Rohre) verlegt sind. Der Installateur ist verantwortlich für die Überprüfung, ob die Wand die Gesamtlast des Gerätes und der Wandhalterungen sicher tragen kann.Für die Installation sind zusätzliche Werkzeuge (nicht im Lieferumfang enthalten) erforderlich.Ziehen Sie die Schrauben nicht zu fest an.Überprüfen Sie die Wand vor dem Bohren und Montieren mit einem elektronischen Bolzensuchgerät. 1) Drehen Sie die Schrauben aus dem Gerät.2) Befestigen Sie die Wandhalterungen mit den aus dem Gerät gedrehten Schrauben am Gerät.3) Bohren Sie 2 parallele Löcher (Ø 3-8 mm je nach Wandtyp) in die Wand. Der Abstand zwischen den Löchern muss 767 mm betragen.4) Stecken Sie je 1 Dübel fest in jedes Loch in der Wand.

DE 07

Page 54: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

5) Drehen Sie je 1 Schraube in jedes Loch bzw. Dübel. Lassen Sie einen Abstand von 5 mm zwischen der Wand und dem Schraubenkopf. Heben Sie das Gerät mit den befestigten Wandhaltern über die Schraubenköpfe und hängen Sie es ein.

DE 08

AnschlüsseHDMI-ARC-AnschlussSie können das Gerät an jedes AV-System bzw. jeden Fernseher mit HDMI-ARC-Anschluss (Audio Return Channel) anschließen.

Mit der ARC-Funktion können Sie Audio von Ihrem ARC-kompatiblen Fernseher über eine einzige HDMI-Verbindung an Ihr Gerät senden. Für die Nutzung der ARC-Funktion vergewissern Sie sich bitte, dass Ihr Fernseher mit HDMI-CEC und ARC ausgestattet ist.Bei richtiger Einstellung können Sie mit Ihrer TV-Fernbedienung die Lautstärke des angeschlossenen Geräts einstellen.

Page 55: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

Verbinden Sie den HDMI-Anschluss am Gerät über das HDMI-Kabel (nicht im Lieferumfang enthalten) mit dem HDMI-Anschluss (ARC) an Ihrem Fernseher (mindestens HDMI 1.4).Drücken Sie dann die Taste SOURCE am Gerät, bis die LED-Anzeige grün leuchtet, oder drücken Sie die Taste HDMI ARC auf der Fernbedienung des Geräts, um den HDMI ARC-Modus auszuwählen. Die LED-Anzeige blinkt grün.

Bitte beachten:• Ihr Fernsehgerät muss die HDMI-CEC- und ARC-Funktion unterstützen. HDMI-CEC und ARC müssen an Ihrem Fernseher auf EIN gestellt sein.• Das Vorgehen zum Einstellen von HDMI-CEC und ARC kann je nach Fernseher unterschiedlich sein. Einzelheiten zur ARC-Funktion entnehmen Sie bitte der Bedienungsanleitung Ihres Fernsehers.• Nur HDMI 1.4-Kabel können die ARC-Funktion unterstützen!

Optischer AnschlussSie können das Gerät an jeden AV- und Fernseher mit optischem Anschluss anschließen.

Über den optischen Anschluss können Sie Audio von Ihrem Fernseher über eine optische Verbindung an Ihr Gerät senden. Für die Nutzung der optischen Funktion vergewissern Sie sich bitte, dass Ihr Fernseher über einen optischen Anschluss verfügt.

DE 09

Nehmen Sie die Schutzkappe vom optischen Anschluss ab und verbinden Sie dann den optischen Ausgang am Fernseher über ein optisches Kabel (nicht im Lieferumfang enthalten) mit dem optischen Anschluss am Gerät.Drücken Sie dann die Taste SOURCE am Gerät, bis die LED-Anzeige orange aufleuchtet, oder drücken Sie die Taste OPTICAL auf der Fernbedienung des Geräts, um den optischen Modus auszuwählen. Die LED-Anzeige leuchtet orange.

Bitte beachten:Wenn kein Ton ausgegeben wird und die Anzeige blinkt, kontrollieren Sie bitte, dass die Audioeinstellung an der Eingangsquelle (z.B. TV, Spielkonsole, DVD-Player usw.) bei optischem und koaxialem Ausgangssignal auf „PCM“ eingestellt ist.

11

10

4

4

6

6

6

6

5

B

B

Page 56: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

Schließen Sie ein AUX-Kabel zwischen dem AUX-Ausgang am Fernseher und dem AUX-Anschluss am Gerät an.Drücken Sie dann die Taste SOURCE am Gerät, bis die LED-Anzeige grün aufleuchtet, oder drücken Sie die Taste AUX auf der Fernbedienung des Geräts,

Schließen Sie ein Koaxialkabel zwischen dem Koaxialausgang des Fernsehers und dem koaxialen Anschluss am Gerät an.Drücken Sie dann die Taste SOURCE am Gerät, bis die LED-Anzeige orange blinkt, oder drücken Sie die Taste COAXIAL auf der Fernbedienung des Geräts, um den koaxialen Modus auszuwählen. Die LED-Anzeige blinkt orange.

AUX-AnschlussÜber den AUX-Anschluss können Sie das Gerät an jedes AV-System und jeden Fernseher anschließen.

Über den AUX-Anschluss können Sie Audio von Ihrem Fernseher über eine AUX-Verbindung (3,5 mm) auf Ihrem Gerät ausgeben. Für die Nutzung der AUX-Funktion vergewissern Sie sich bitte, dass Ihr Fernseher einen AUX-Anschluss hat.

DE 10

Koaxialer AnschlussÜber den koaxialen Anschluss können Sie das Gerät an jeden koaxialen Ausgang an einem AV-System oder Fernseher anschließen.

Über den koaxialen Anschluss können Sie Audio von Ihrem Fernseher über eine koaxiale Verbindung an Ihr Gerät senden. Für die Nutzung der Koaxialfunktion vergewissern Sie sich bitte, dass Ihr Fernseher über einen koaxialen Anschluss verfügt.

4 69

6B

4 68

B

Page 57: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

um den AUX-Modus auszuwählen. Die LED-Anzeige leuchtet grün.

A. Verbinden Sie den Audioausgang des Fernsehers mit dem AUX-Anschluss des Geräts, verwenden Sie dazu ein Cinch-auf-3,5-mm-Audiokabel (im Lieferumfang enthalten),B. Verbinden Sie den Kopfhörerausgang des Audiogeräts mit dem AUX-Anschluss des Geräts. Verwenden Sie dafür ein 3,5-auf-3,5-mm-Audiokabel (im Lieferumfang enthalten),

NetzanschlussBevor Sie das Netzkabel anschließen, vergewissern Sie sich bitte, dass Sie alle anderen Anschlüsse vorgenommen haben.• IPrüfen Sie vor der Inbetriebnahme, ob die Netzspannung mit der am Gerät angegebenen Netzspannung übereinstimmt.• IStecken Sie den Netzstecker in die Steckdose.• IStecken Sie den Netzstecker des Netzkabels in die Netzbuchse am Gerät .• IDas Gerät befindet sich nun im Standby-Modus. Die Standby-LED leuchtet rot.

DE 11

Strom EIN/AUS – StandbyZum Einschalten des Geräts drücken Sie die Ein/Aus-Taste am Gerät oder die Taste Power auf der Fernbedienung des Geräts.Die LED-Anzeige für den zuletzt verwendeten Quellenmodus leuchtet auf.Um das Gerät auf Standby zu schalten, drücken Sie die Ein/Aus-Taste am Gerät oder die Taste Power auf der Fernbedienung des Geräts. Die LED-Anzeige leuchtet rot auf.

Ziehen Sie den Netzstecker aus der Steckdose, wenn Sie das Gerät komplett ausschalten möchten.

Bitte beachten:Wenn das Gerät nicht benutzt wird (kein Eingangssignal), schaltet es nach 15 Minuten automatisch in den Standby-Modus.Wenn das externe Eingangssignal des Gerätes zu schwach ist, schaltet es nach 15 Minuten automatisch in den Standby-Modus. Bitte erhöhen Sie das Eingangssignal Ihres extern angeschlossenen Gerätes.

6

8

6

12

6

6

5

5

A

A

Page 58: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

MODE-AuswahlZum Auswählen des gewünschten Eingangsmodus drücken Sie die Taste SOURCE am Gerät oder die gewünschte Taste AUX – BT – HDMI ARC – OPTICAL – COAXIAL auf der Fernbedienung des Geräts.Der gewählte Modus wird auf der LED-Anzeige des Gerätes angezeigt:• ROT: Standby-Modus.• GRÜN: AUX-Modus.• BLINKT GRÜN: HDMI-ARC-Modus.• BLAU: BT-Modus.• ORANGE: optischer Modus.• BLINKT ORANGE: koaxialer Modus.

Bitte beachten:Wenn sich die Gerätequelle im BT-Modus befindet und die BT-Verbindung nicht mehr aktiv oder außer Reichweite ist, blinkt die LED-Anzeige blau.Wenn sich die Gerätequelle im HDMI-ARC-Modus befindet und kein aktives Eingangssignal anliegt, blinkt die LED-Anzeige grün.

Einstellen der Lautstärke• Zum Einstellen der Lautstärke drücken Sie die Lautstärke-Tasten + und - am Gerät oder die Tasten VOL+ und VOL- Tasten auf der Fernbedienung des Gerätes.• Wenn Sie den Ton ausschalten möchten, drücken Sie die Taste MUTE auf der Fernbedienung. Um zur normalen Lautstärke zurückzukehren, drücken Sie die Taste MUTE oder die VOL+ oder VOL- .• Während der Einstellung der Lautstärke blinkt die LED-Anzeige für den gewählten Quellenmodus schnell.• Wenn die maximale Lautstärke erreicht ist und Sie versuchen, sie weiter zu erhöhen, blinkt die LED-Anzeige für die gewählte Quelle einmal.• Wenn die minimale Lautstärke erreicht ist und Sie versuchen, sie weiter zu verringern, blinkt die LED-Anzeige für die gewählte Quelle einmal.

Auswahl einen voreingestellten ToneffektsZur Auswahl des gewünschten voreingestellten Equalizers drücken Sie während der Wiedergabe die Tasten NEWS, MOVIE, MUSIC auf der Fernbedienung des Geräts.

Voreingestellte Modi• Film (für das Ansehen von Filmen empfohlen).• Musik (zum Musikhören empfohlen).• NEWS (zum Hören von Nachrichten / Gesprächen empfohlen).

Während der Auswahl eines voreingestellten Toneffekts blinkt die LED-Anzeige für die gewählten Quelle schnell.

DE 12

4

6B

C

C

E

D

D

6

6

6

6

6

7

6

Page 59: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

MODE-Auswahl (AUX / COAXCIAL / HDMI ARC / OPTICAL)Vergewissern Sie sich, dass das Gerät an den Fernseher bzw. das Audiogerät angeschlossen ist.

Zur Auswahl des gewünschten Quellenmodus drücken Sie bei eingeschaltetem Gerät die Taste SOURCE am Gerät oder die Taste AUX – HDMI ARC – OPTICAL – COAXIAL auf der Fernbedienung. Die LED-Anzeige leuchtet in der Farbe der gewählten Quelle.Die Audio- und Wiedergabefunktionen können Sie direkt von Ihrem angeschlossenen Audiogerät aus bedienen.

Bitte beachten:Wenn kein Ton ausgegeben wird und die LED-Anzeige für den gewählten Quellenmodus blinkt, kontrollieren Sie, dass die Audioeinstellung der Eingangsquelle (z.B. Fernseher, Spielkonsole, DVD-Player usw.) an Ihrem Audiogerät (z.B. CD, DVD, Blu-ray) auf „PCM“ umgestellt wurde.

Herstellen einer BT-VerbindungWenn Sie das Gerät zum ersten Mal verwenden, müssen Sie eine gegenseitige Registrierung (Pairing) zwischen Ihrem BT-fähigen Audioplayer und dem Gerät durchführen.

• Zur Auswahl des BT-Modus drücken Sie die Taste SOURCE am Gerät oder die Taste BT auf der Fernbedienung. Die LED-Anzeige blinkt langsam blau. Das Gerät ist nun im Pairing-Modus.• Lassen Sie Ihren BT-fähigen Audioplayer während des Pairing-Vorgangs innerhalb einer Entfernung von 1 m vom Gerät.• Lassen Sie Ihren BT-fähigen Audioplayer nach kompatiblen BT-Geräten suchen und wählen Sie „DO-SV-BTSB3“ aus der Liste der gefundenen Geräte. Nach erfolgreichem Pairing hören Sie die Sprachansage „paired“ und die LED-Anzeige leuchtet blau.• Wenn Sie das Gerät nicht in der Liste der verfügbaren BT-Verbindungen finden, können Sie den Pairing-Vorgang auch von Hand starten. Dazu halten Sie die /PAIR-Taste auf der Fernbedienung des Geräts gedrückt. Nun hören Sie die Sprachansage „Pairing“ vom Gerät. Die LED-Anzeige blinkt schnell blau.• Wählen Sie „DO-SV-BTSB3“ aus der Liste der gefundenen Geräte. Nach der Sprachansage „paired“ wird die BT-Verbindung erfolgreich aufgebaut und die LED-Anzeige leuchtet blau.• Wenn Sie einen anderen BT-fähigen Audioplayer an das Gerät anschließen möchten, drücken Sie die Taste /PAIR-Taste auf der Fernbedienung, um die aktive gepaarte Verbindung zu trennen, bis Sie die Sprachansage „disconnected“ hören.• Wenn Sie Musik auf Ihrem angeschlossenen BT-Audioplayer wiedergeben und/oder anhalten möchten, öffnen Sie den Mediaplayer und drücken Sie auf Wiedergabe/Pause.

DE 13

B

B

C

4

4

6

6

6

6

6

6

C

Page 60: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

• Zum Steuern der Musik verwenden Sie die Wiedergabe-, Titel- und Lautstärketasten am angeschlossenen BT-Audioplayer oder die Steuerungstasten auf dem Bedienfeld des Geräts oder der Fernbedienung.• Wenn sich ein gepaarter BT-Audioplayer in Reichweite befindet, wird er automatisch mit dem Gerät verbunden.

Bitte beachten:• Falls beim Herstellen einer BT-Verbindung nach einem PIN-Code gefragt wird, geben Sie 0000 ein.• Wenn eine BT-Verbindung besteht, halten Sie die Taste /PAIR auf der Fernbedienung gedrückt, um den Pairing-Modus erneut zu aktivieren. Die bestehende Verbindung wird unterbrochen und Sie hören die Sprachansage „disconnected“.• Wenn ein gepaarter BT-Audioplayer außer Reichweite gerät, trennt er sich vom Gerät, und Sie hören die Sprachansage „disconnected“.• Wenn sich innerhalb von zwei Minuten kein anderes BT-Gerät mit dem Gerät paart, stellt der Player seine vorherige Verbindung/den vorherigen Modus wieder her.

Musik vom BT-fähigen Audio-Player hörenMit dem angeschlossenen BT-fähigen Audioplayer können Sie Musik hören, wenn dieser das Advanced Audio Distribution Profile (A2DP) unterstützt.Das Gerät unterstützt Audio Video Remote Control (AVRCP), d.h. Sie können die Fernbedienung des Geräts verwenden, um Musik auf dem BT-fähigen Audioplayer wiederzugeben.• Zum Wiedergeben von Musik auf Ihrem angeschlossenen Audioplayer können Sie die Steuerungstasten auf Ihrem Mediaplayers verwenden.• Zum Wiedergeben/Pausieren der Musik Ihres angeschlossenen Audioplayers können Sie die Taste /PAIR auf der Fernbedienung des Geräts drücken.• Um den nächsten oder vorherigen Titel auf dem angeschlossenen Audioplayer abzuspielen, können Sie die Tasten & auf der Fernbedienung des Geräts drücken.

4) TECHNISCHE DATEN• Netzspannung: 220-240 V AC – 50/60 Hz• Leistungsaufnahme: 30 W (<0,5 W im Standby-Modus)• Stereolautsprecher: 50 W (2x 25 W)• Lautsprecherwiderstand: 2x 8 Ω• Frequenzgang: 40 Hz – 20 kHz• BT-Version 4.2• Sendeleistung: Klasse II• Maximal gesendete Leistung: <5 dBm• Reichweite: bis 10 m• Frequenz: 2,4 Ghz – 2,48 Ghz• BT-Profile: A2DP, AVRCP• Reichweite der Fernbedienung: 6 m, Winkel 30°

DE 14

C

C

C

Page 61: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

Ihr Produkt wurde aus hochwertigen Materialien und Komponenten hergestellt, die man recyceln und wiederverwenden kann. Am Ende seiner Lebensdauer darf dieses Produkt nicht im normalen Hausmüll entsorgt werden, sondern muss zu einer speziellen Sammelstelle für das Recycling von elektrischen und elektronischen Geräten gebracht werden. Das durchgestrichene Abfallcontainer-Symbol im Benutzerhandbuch und auf der Verpackung weist darauf hin. Alle Rohstoffe sind für die Wiederverwertung geeignet.

Durch die Wiederverwertung der Altgeräte oder Rohstoffe leisten Sie einen wichtigen Beitrag zum Schutz unserer Umwelt. Sie können die nächstgelegene Sammelstelle bei Ihrer Gemeinde erfragen.

ANWEISUNGEN ZUM SCHUTZ DER UMWELT(EEAG, Rückgewinnung von Elektro- und Elektronik-Altgeräten)

• Maße: 80 x 6 x 6 cm (L x B x H) waagerecht - Soundbar• Maße: 12,8 x 12,8 x 46,7 cm (L x B x H) senkrecht – Stand-/Turmlautsprecher• Gewicht: 1,4 kg waagerecht - Soundbar• Gewicht: 1,6 kg senkrecht – Ständer/Turmlautsprecher

5) PFLEGE UND REINIGUNG

WarnungSchalten Sie das Gerät vor der Reinigung immer aus, trennen Sie es vom Stromnetz und lassen Sie es vollständig abkühlen.

Reinigung• Verwenden Sie niemals aggressive oder scheuernde Reinigungsmittel, Reinigungsalkohol oder scharfkantige Gegenstände (wie harte Bürsten).• Reinigen Sie das Gehäuse und das Kabel mit einem feuchten Tuch.• Trocknen Sie das Gehäuse mit einem trockenen Tuch ab.

6) LAGERUNG & TRANSPORT• Wenn Sie das Gerät aufbewahren, sollte es zuerst wie in der Bedienungsanleitung beschrieben gereinigt werden. Das Gerät sollte in der Originalverpackung aufbewahrt werden.• Bewahren Sie das Gerät immer in einem trockenen und gut belüfteten Raum und außerhalb der Reichweite von Kindern auf.• Schützen Sie das Gerät während des Transports gegen Vibrationen und Stöße.

Alle Inhalte und Angaben in diesem Handbuch können ohne vorherige Ankündigung geändert werden.

DE 15

Page 62: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

We,Mascot Online BVVeluwezoom 321327 AH AlmereThe Netherlands

Declare under our sole responsibility that the product:

• Product Brand: Dutch Originals• Product Model No: DO-SV-BTSB3-B• Product Description: Wireless BT Detachable Soundbar• Product Rating: Input 220-240Vac, 50/60 Hz, IPX0, Class II, Power Consumption: 30W

Following the provisions of the Directives:

• Energy Related Product Directive (ERP) 2009/125/EC• Radio Equipment Directive (RED): 2014/53/EU• RoHS Directive: 2011/65/EU

And standards to which Conformity is declared:

ERP:• 1275/2008

RED:• EN300 328-1 V2.1.1 (2016-11)• Draft EN301 489-1 V2.2.0 (2017-03)• Draft EN301 489-17 V3.2.0 (2017-03)• EN55032 :2012• EN55032 :2015• EN55035 :2017• EN62479: 2010• EN61000-3-2:2014• EN61000-3-3:2013

Place: AlmereDate of issue: 01-06-2018

Authorized Signature name: B. van DijkTitle: Managing Director

EC Declaration Of Conformity

Page 63: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring
Page 64: User Manual - Outspot Dutch...result in severe personal injury and damage. If you intend to install this device yourself, you must check for installations such as electrical wiring

Version 2018.6.20