User manual

Dishwasher

ZDF 131

Thank you for selecting ourapplianceWe wish you lots of enjoyment with your newappliance and we hope that you will considerour brand again when purchasing householdappliances.Please read this user manual carefully andkeep it throughout the product life cycle as areference document. The user manual shouldbe passed on to any future owner of the appli-ance.

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ 3Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Washing programmes _ _ _ _ _ _ _ _ _ _ _ 5First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6Set the water softener _ _ _ _ _ _ _ _ _ _ _ 7Filling with dishwasher salt _ _ _ _ _ _ _ _ 9Filling with rinse aid _ _ _ _ _ _ _ _ _ _ _ 10Adjusting the dosage of rinse aid _ _ _ _ 11Loading cutlery and dishes _ _ _ _ _ _ _ 11Use of detergent _ _ _ _ _ _ _ _ _ _ _ _ _ 13

Unloading the dishwasher _ _ _ _ _ _ _ _ 14Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ 15Environmental concerns _ _ _ _ _ _ _ _ _ 16Something not working _ _ _ _ _ _ _ _ _ 17Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ 19Consumption values _ _ _ _ _ _ _ _ _ _ _ 20Hints for test institutes _ _ _ _ _ _ _ _ _ _ 20Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 21Guarantee conditions _ _ _ _ _ _ _ _ _ _ 23

2

Safety informationIn the interest of your safety and to ensure thecorrect use, before installing and first using theappliance, read this user manual carefully, in-cluding its hints and warnings. To avoid unnec-essary mistakes and accidents, it is importantto ensure that all people using the applianceare thoroughly familiar with its operation andsafety features. Save these instructions andmake sure that they remain with the applianceif it is moved or sold, so that everyone using itthrough its life will be properly informed on ap-pliance use and safety.

Correct use• This dishwasher is only intended for washing

household utensils suitable for machinewashing.

• Do not put any solvents in the dishwasher.This could cause an explosion.

• Knives and other items with sharp pointsmust be loaded in the cutlery basket withtheir points down or placed in a horizontalposition in the upper basket.

• Only use products (detergent, salt and rinseaid) suitable for dishwashers.

• Avoid opening the door whilst the applianceis in operation, hot steam may escape.

• Do not take any dishes out of the dishwasherbefore the end of the dishwashing cycle.

• After use, isolate the appliance from thepower supply and turn off the water supply.

• This product should be serviced only by anauthorised service engineer, and only gen-uine spare parts should be used.

• Under no circumstances should you attemptto repair the machine yourself. Repairs car-ried out by inexperienced persons will causeinjury or serious malfunctioning. Contactyour local Service Force Centre. Always in-sist on genuine spare parts.

General safety• Dishwasher detergents can cause chemical

burns to eyes, mouth and throat. Could en-danger life! Comply with the safety instruc-tions of the dishwasher detergent manufac-turer.

• The water in your dishwasher is not for drink-ing. Detergent residues may still be presentin your machine.

• Ensure that the door of the dishwasher isalways closed when it is not being loaded orunloaded. In this way you will avoid anybodytripping over the open door and hurtingthemselves.

• Do not sit or stand on the open door.

Child safety• This appliance is designed to be operated

�by adults. Don t allow children to use thedishwasher unsupervised.

• Keep all packaging well away from children.There is risk of suffocation.

• Keep all detergents in a safe place out of�children s reach.

• Keep children well away from the dishwash-er when the door is open.

3

Installation• Check your dishwasher for any transport

damage. Never connect a damaged ma-chine. If your dishwasher is damaged con-tact your supplier.

• All packaging must be removed before use.• Any electrical and plumbing work required to

install this appliance must be carried out bya qualified and competent person.

• For safety reasons it is dangerous to alterthe specifications or attempt to modify thisproduct in any way.

• Never use the dishwasher if the electricalsupply cable and water hoses are damaged;

or if the control panel, work top or plinth areaare damaged such that the inside of the ap-pliance is freely accessible. Contact yourlocal Service Force centre, in order to avoidhazard.

• All sides of the dishwasher must never bedrilled to prevent damage to hydraulic andelectric components.

CAUTION!For electrical and water connection carefullyfollow the instructions given in specific para-graphs.

Control panel

1. Programme selector dial and On/Off switch2. Start/cancel button3. Indicator light4. Programme selector indicator light

Programme selector dial and On/Off switch • when in this position, the machine is switched off(corresponding light off),

• when the marker on the dial corresponds with aprogramme, the machine is switched on and a pro-gramme is selected (programme selector indicatorlight on)

4

Start/cancel button • Starting the washing programme:1. Select a washing programme.2. Press the Start/Cancel button (corresponding

light on).

IMPORTANT!Once the programme has started, if you want tochange the selection made you must cancel thewashing programme in progress.

• Cancel the washing programme in progress:1. Press and hold the Start/Cancel button until

the corresponding light turns off.2. Release the Start/Cancel button.3. Turn the programme selector dial to the Off

position or select a new washing programme(check that there is detergent in the detergentdispenser.

Programme selector indicator light Illuminates when the washing programme is selected

Indicator lightEnd of programme indicator light Illuminates when the washing programme has ended.

Switch off the dishwasher by returning the programmeselector dial to the Off position. The On/Off indicatorlight turns off.It also has added functions of visual signalling as:– the setting of the water softener,– intervention of an alarm due to the malfunction of

the machine.

5

Washing programmesProgramme Degree of soil Type of load Programme descrip-

tionAIntensive 70°

Heavy soil Crockery, cutlery, potsand pans

PrewashMain wash2 intermediate rinsesFinal rinseDrying

BNormal 65°

Normal soil Crockery, cutlery, potsand pans

PrewashMain wash1 intermediate rinsesFinal rinseDrying

CEat-Load-Run1)

30 min.

Light soil Crockery and cutlery Main washFinal rinse

D 50°

2)

Normal soil Crockery and cutlery PrewashMain wash1 intermediate rinseFinal rinseDrying

1) Ideal for washing a partially loaded dishwasher. This is perfect daily programme, made to meet the needs of a family of 4persons who only wish to load breakfast and dinner crockery and cutlery.

2) Test programme for test institutes.

First useBefore using your dishwasher for the first time:• Ensure that the electrical and water connec-

tions comply with the installation instructions• Remove all packaging from inside the appli-

ance• Set the water softener

• Pour 1 litre of water inside the salt containerand then fill with dishwasher salt

• Fill the rinse aid dispenser

6

When using tablets thatintegrate rinse aid anddetergent:there is no need to fill up with rinse aid– set the water softener– add special (dishwasher) salt

When using tablets thatintegrate rinse aid, detergent,salt function and otheradditives:there is no need to fill up with special salt orrinse aid.Check whether these detergents are suitablefor your water hardness. Follow the manufac-turers instructions.

– Set the water hardness to level 1.

IMPORTANT!If the drying results are not satisfactory we rec-ommend that you:1. Fill up the rinse aid dispenser with rinse aid.2. Set the rinse aid dosage to position 2.

If you decide in future to use separated deter-gents, we advise that you:– Fill up the salt and rinse aid container.– Adjust the water hardness setting to the

highest level and perform 1 normal washingprogramme without loading any dishes.

– Adjust the water hardness setting accordingto the hardness of the water in your area.

– Adjust the rinse aid dosage

Set the water softenerThe dishwasher is equipped with a water soft-ener designed to remove minerals and saltsfrom the water supply, which would have a det-rimental or adverse effect on the operation ofthe appliance.The higher the content of these minerals andsalts, the harder your water is.Water hardness is measured in equivalentscales, Clarke degrees, French degrees (°TH)

and mmol/l (millimol per litre - international unitfor the hardness of water).The softener should be adjusted according tothe hardness of the water in your area. Yourlocal Water Authority can advise you on thehardness of the water in your area.

Water hardness Adjusting the water hardnesssetting

Use of salt

Clarke °TH mmol/l manually electronically64 - 88 91 - 125 9,0- 12,5 2 level 10 yes53 - 63 76 - 90 7,6 - 8,9 2 level 9 yes

7

Water hardness Adjusting the water hardnesssetting

Use of salt

Clarke °TH mmol/l manually electronically46 - 52 65 - 75 6,51 - 7,5 2 level 8 yes36 - 45 51 - 64 5,1 - 6,4 2 level 7 yes28 - 35 40 - 50 4,0 - 5,0 2 level 6 yes23 - 27 33 - 39 3,3 - 3,9 2 level 5 yes18 - 22 26 - 32 2,61 - 3,2 1 level 4 yes13 - 17 19 - 25 1,9 - 2,5 1 level 3 yes5 - 12 7 - 18 0,71 - 1,8 1 level 2 yes< 5 < 7 < 0,7 1 level 1 no

The water softener must be set in both ways:manually, using the water hardness dial andelectronically.

Setting the water softener manually (see table)

Set switch to position 1 or2

The water softener is factory set at position 2.

Setting the water softener electronically (see table)The water softener is factory set at position 5.The dishwasher must be switched off .

8

Press and hold the start/cancel button and turn theprogramme selector dial clockwise till the first pro-gramme.Keep the button pressed until the programme selectorindicator light and the start/cancel indicator light startflashing.

Release the button. The end of programme indicatorlight will flash. The number of flashes corresponds tocurrent level set.The end of programme indicator light might flash 5times, for example. The flashing is repeated every 5seconds.To change the level, press the start/cancel button.Each time the button is pressed the level increases.(Level 1 follows level 10).The end of programme indicator light indicates thenew setting.To memorise the operation, turn the programme se-lector dial to position off.

Filling with dishwasher salt CAUTION!

Use only special salt suitable for dishwashers.

Unscrew the cap. Only before filling withsalt for the first time, fillthe salt container withwater.

Using the funnel provi-ded, pour in the salt untilthe container is filled withsalt.

9

Remove any trace of salt. Replace the cap tightlyturning it clockwise until itstops with a click.

IMPORTANT!Immediately start a complete programme.

IMPORTANT!Water will overflow from the container as salt is add-ed.

IMPORTANT!The salt container will require topping up periodically.

The salt cap has a refill indicator window in the centrein which a green float is clearly visible when there issalt inside the container and almost disappears whenthe salt has finished.

Filling with rinse aid

Open the lid. Fill up with rinse aid. Themaximum level for fillingis indicated by "max"

Clean up any rinse aidwhich overflows. Closethe lid and press until itlocks.

10

Top up the rinse aid indi-cator (B) becomes clear

CAUTION!Never fill the rinse aid dispenser with any other substances (e.g. dishwashercleaning agent, liquid detergent). This would damage the appliance.

Adjusting the dosage of rinse aidIncrease the dose if there are drops of water orlime spots on the dishes after washing.

Reduce the dose if there are whitish streaks onthe dishes or a bluish film on glassware or knifeblades.

Open the lid. Set the dosage level.(The dose is factory set inposition 4).

Close the lid and pressuntil it locks.

Loading cutlery and dishesSponges, household cloths and any object thatcan absorb water may not be washed in thedishwasher.• Before loading the dishes, you should:

– Remove all left over food and debris.– Soften remnants of burnt food in pans

• When loading the dishes and cutlery, pleasenote:– Dishes and cutlery must not impede the

rotation of the spray arms.– Load hollow items such as cups, glasses,

pans, etc. with the opening downwards so

11

that water cannot collect in the containeror a deep base.

– Dishes and items of cutlery must not lieinside one another, or cover each other.

– To avoid damage to glasses, they mustnot touch.

– Lay small objects in the cutlery basket.

• Plastic items and pans with non stick coat-ings have a tendency to retain water drops;these items will not dry as well as porcelainand steel items.

• Light items (plastic bowls etc.) must be loa-ded in the upper basket and arranged sothey do not move.

For washing in the dishwasher the following cutlery and dishesare not suitable: are of limited suitability:

• Cutlery with wooden, horn, china or mother-of-pearls handles.

• Plastic items that are not heat resistant.• Older cutlery with glued parts that are not temper-

ature resistant.• Bonded cutlery items or dishes.• Pewter or copper items.• Lead crystal glass.• Steel items prone to rusting.• Wooden platters.• Items made from synthetics fibres.

• Only wash stoneware in the dishwasher if it is spe-cially marked as being dishwasher-safe by themanufacturer.

• Glazed patterns may fade if machine washed fre-quently.

• Silver and aluminium parts have a tendency to dis-colour during washing: Residues, e.g. egg white,egg yolk and mustard often cause discolouring andstaining on silver. Therefore always clean left-overs from silver immediately, if it is not to bewashed straight after use.

Load cutlery. For best re-sults we recommend youto use the cutlery gridprovided (if the size anddimensions of the cutleryallow it)

Place knives and otheritems of cutlery withsharp points or edgeswith their handles facingupwards. Risk of injury!

Load the lower basket.Arrange serving dishesand large lids around theedge of the basket.

12

Load upper basket. Lightitems (plastic bowls etc.)must be loaded in the up-per basket and arrangedso they do not move.

For taller items, the cupracks can be folded up-wards.

If plates are to be loaded in the upper basket: loadthem starting from the rear positions; tilting themslightly forwards and avoiding the front positionsnear the door.

Adjusting the height of theupper basketIf washing very large plates you can load themin the lower basket after moving the upper bas-ket to the higher position.

Maximum height of the dishes in: upper basket lower basket

With upper basket raised 20 cm 31 cmWith upper basket lowered 24 cm 27 cm

Move the front runnerstops (A) of the upper bas-ket outwards and slide thebasket out.

Refit the basket in thehigher position and re-place the stops (A) in theiroriginal position.

IMPORTANT!When the basket is in the higher position you will notbe able to use the cup racks.

13

Use of detergentIMPORTANT!Only use detergents suitable for dishwashers.

Observe the manufacturer’s dosing and stor-age recommendations.

Open the lid. Fill in the detergent incompartment A.

Observe the dosing lev-els.

For programmes withprewash add an addition-al detergent dose in com-partmentB.

When using detergenttablets: place detergenttablets in compartmentA.

Close the lid.

Unloading the dishwasher• Hot dishes are sensitive to knocks.

The dishes should therefore be allowed tocool down before removing from the appli-ance.

• Empty the lower basket first and then theupper one; this will avoid water dripping fromthe upper basket onto the dishes in the lowerone.

• Water may appear on the sides and the doorof the dishwasher as the stainless steel willeventually become cooler than the dishes.

CAUTION!When the washing programme has finished, itis recommended that the dishwasher is un-plugged and the water tap turned off.

14

Care and cleaningCleaning the filtersIMPORTANT!NEVER use the dishwasher without filters. In-correct repositioning and fitting of the filters willproduce poor washing results.

Clean filters A, B and Cthoroughly under runningwater.

Turn the handle about 1/4turn anticlockwise andremove filters B and C.

Remove filter A from thebase of the washingcompartment.

Put the flat filter A back inthe base of the washingcompartment and ensurethat it fits perfectly underthe two guidesD.

Replace the filters andlock by turning the handleclockwise to the stop.

Cleaning the spray armsNEVER try to remove the spray arms.

If residues of soil have clogged the holes in thespray arms, remove them with a cocktail stick.

External cleaningClean the external surfaces of the machine andcontrol panel with a damp soft cloth. If neces-sary use only neutral detergents. Never use

15

abrasive products, scouring pads or solvent(acetone, trichloroethylene etc....).

Internal cleaningEnsure that the seals around the door, the de-tergent and rinse aid dispensers are cleanedregularly with a damp cloth.We recommend every 3 months to run the washprogramme for heavy soiled dishes using de-tergent but without dishes.

Prolonged periods of non-operationIf you are not using the machine for any pro-longed period of time you are advised to:1. Unplug the appliance and then turn off the

water.2. Leave the door ajar to prevent the forma-

tion of any unpleasant smells.3. Leave the inside of the machine clean.

Frost precautionsAvoid placing the machine in a location wherethe temperature is below 0°C. If this is unavoid-able, empty the machine, close the appliancedoor, disconnect the water inlet pipe and emptyit.

Moving the machineIf you have to move the machine (moving houseetc....):1. Unplug it.2. Turn the water tap off.3. Remove the water inlet and discharge ho-

ses.4. Pull the machine out together with the ho-

ses.Avoid over tilting the machine during transpor-tation.

Environmental concernsPackaging materialThe packaging materials are environmentallyfriendly and can be recycled. The plastic com-ponents are identified by markings, e.g. >PE<,>PS<, etc. Please dispose of the packagingmaterials in the appropriate container at thecommunity waste disposal facilities.

CAUTION!When a unit is no longer being used:• Pull the plug out of the socket.• Cut off the cable and plug and dispose of

them.

• Dispose of the door catch. This preventschildren from trapping themselves insideand endangering their lives.

The symbol on the product or on its pack-aging indicates that this product may not betreated as household waste. Instead it shouldbe taken to the appropriate collection point forthe recycling of electrical and electronic equip-ment. By ensuring this product is disposed ofcorrectly, you will help prevent potential nega-tive consequences for the environment andhuman health, which could otherwise be

16

caused by inappropriate waste handling of thisproduct. For more detailed information aboutrecycling of this product, please contact your

local council, your household waste disposalservice or the shop where you purchased theproduct.

Something not workingThe dishwasher will not start or stops duringoperation.Certain problems are due to the lack of simplemaintenance or oversights, which can besolved with the help of the indications describedin the chart, without calling out an engineer.

Switch off the dishwasher, open the door andcarry out the following suggested corrective ac-tions.

Fault code and malfunction Possible cause and solution• continuous flashing of the start/cancel indicator

light• 1 flash of the end of programme indicator lightThe dishwasher does not fill with water

• The water tap is blocked or furred with limescaleClean the water tap• The water tap is turned offTurn the water tap on• The filter (where present) in the threaded hose fit-

ting at the water inlet valve is blockedClean the filter in the threaded hose• The water inlet hose has not been correctly laid or

it is bent or squashedCheck the water drain hose connection

• continuous flashing of the start/cancel indicatorlight

• 2 flashes of the end of programme indicator lightThe dishwasher will not drain

• The sink spigot is blockedClean out the sink spigot• The water drain hose has not been correctly laid

or it is bent or squashedCheck the water drain hose connection

• continuous flashing of the start/cancel indicatorlight

• 3 flashes of the end of programme indicator light

• Anti-flood device is activatedClose the water tap and contact your local ServiceForce Center.

17

Fault code and malfunction Possible cause and solution• The programme does not start • The dishwasher’s door has not been properly

closedClose the door• The main plug is not plugged inInsert the main plug• The fuse has blown out in the household fuse boxReplace the fuse• Delay start has been setIf dishes are to be washed immediately, cancel thedelay start

Once these checks have been carried out;�close the dishwasher s door and switch on the

appliance. Press the button of the programmethat was running before the intervention of thealarm. The programme will continue from thepoint at which it was interrupted.If the malfunction or fault code reappears con-tact the Service Force Centre.For other fault codes not described in the abovechart, please contact your Service Force Cen-tre.Contact your local Service Force Centre, quot-ing the model (Mod.), product number (PNC)and serial number (S.N.).

This information can be found on the ratingplate located on the side of the dishwasherdoor.So that you always have these numbers athand, we recommend you to make a note ofthem here:Mod. : . . . . . . . . . . . . . . . . . . . . . . .PNC :. . . . . . . . . . . . . . . . . . . . . . . .S.N. : . . . . . . . . . . . . . . . . . . . . . . . .

18

The wash results are not satisfactoryThe dishes are not clean • The wrong washing programme has been selec-

ted.• The dishes are arranged in such a way as to stop

water reaching all parts of the surface. The basketsmust not be overloaded.

• The spray arms do not rotate freely due to incorrectarrangement of the load.

• The filters in the base of the washing compartmentare dirty or incorrectly positioned.

• Too little or no detergent has been used.• Where there are limescales deposits on the dishes;

the salt container is empty or the incorrect level ofthe water softener has been set.

• The drain hose connection is not correct.• The salt container cap is not properly closed.

The dishes are wet and dull • Rinse aid was not used.• The rinse aid dispenser is empty.

There are streaks, milky spots or a bluish coating onglasses and dishes

• Decrease rinse aid dosing.

Water drops have dries onto glasses and dishes • Increase rinse aid dosing.• The detergent may be the cause. Contact the de-

�tergent manufacturer s consumer care line.

If after all these checks, the problem persists,contact your local Service Force Centre.

Technical dataDimensions Width x Height x Depth

cm60,0 x 85,0x 61,0

Electrical connectionVoltage - Overall power - Fuse

Information on the electrical connection is given on the rating plate on�the inner edge of the dishwasher s door.

Water supply pressure Minimum - Maximum(MPa)

0,05 - 0,8

Capacity place settings 12Max. weight kg 40,5

19

Noise level dB(A) 51

Consumption valuesThe consumption values are intended as aguide and depends on the pressure and thetemperature of the water and also by the var-

iations of the power supply and the amount ofdishes.

Consumption valuesProgramme Programme duration

(in minutes)Energy consumption

(in kWh)Water (litres)

A Intensive 65° 120-130 1,8-2,0 22-24B Normal 65° 105-115 1,5-1,7 23-25C Eat-Load-Run 30min.

30 0,9 9

D Eco 50° (Test pro-gramme for Test Insti-tutes)

140 1,05 18

Hints for test institutesTesting in accordance with EN 60704 must becarried out with appliance fully loaded and us-ing the test programme (see "Consumptionvalues").Test in accordance with EN 50242 must becarried out when the salt container and rinse

aid dispenser have been filled with salt andrinse aid respectively and using the test pro-gramme (see "Consumption values").

Full load: 12 standard place settingsAmount of detergent required 5 g + 25 g (Type B)Rinse aid setting position 4 (Type III)

20

Upper basket Cutlery basket Lower basket

cup racks: position A

Installation WARNING!

Any electrical and/or plumbing work required toinstall this appliance should be carried out by aqualified electrician and/or plumber or compe-tent person.

Water connection WARNING!

The dishwasher must not be connected to openwater appliances or instantaneous water heat-

ers. This dishwasher must be fed with coldwater.

WARNING!Only use, for connection to the water mains,new hose-set; old hose-set must not be reused.

CAUTION!If the machine is connected to new pipes orpipes which have not been used for a long time,you should run the water for a few minutes be-fore connecting the inlet hose.

21

Inlet hoseConnect the inlet hose to a water tap with an external

thread of 3/4 .The inlet hose can be turned either to the left or theright to suit the installation by means of the locknut.The locknut must be correctly fitted to avoid waterleaks.

Drain hose

Connect drain hose tothe sink. Secure it withthe supplied hose clamp.

Required height: 30 to100 cm above bottom ofthe dishwasher.

Ensure that the hosesare not kinked, crushedor entangled.

When connecting thedrain hose to an undersink trap spigot, the en-tire plastic membrane(A) must be removed.Failure to remove all themembrane will result infood particles building upover time eventuallyblocking the dishwasherdrain hose spigot.

If you use a drain hose extension the totallength should not be longer than 4 metres.Likewise the internal diameter of the couplingsused for connections to the waste outlet mustbe no smaller than the diameter of the hoseprovided.

22

Electrical connection CAUTION!

Safety standards require the appliance to beearthed.Prior to using the appliance for the first time,ensure that the rated voltage and type of supplyon the rating plate match that of the supplywhere the appliance is to be installed.The fuse rating is also to be found on the ratingplate.Always plug the mains plug into a correctly in-stalled shockproof socket. Multi-way plugs,connectors and extension cables must not beused.This could constitute a fire hazard through over-heating.If necessary, have the domestic wiring systemsocket replaced. In case that the electrical ca-

ble has to be replaced, contact your local Serv-ice Force centre.The plug must be accessible after the appliancehas been installed.Never unplug the appliance by pulling on thecable. Always pull the plug.The manufacturer accepts no liability for failureto observe the above safety precautions.

Fitting under a counter�By removing the dishwasher s worktop, you

can install it under a close fitting sink unit or apre-existing top.Be sure that once the appliance has been in-stalled, it is easily accessible for the serviceengineer in the event that a repair is required.

LevellingGood levelling is essential for correct closure andsealing of the door.When the appliance is correctly levelled, the doorwill not catch on either side of the cabinet.

23

Guarantee conditionsGuarantee/Customer ServiceStandard guarantee conditionsWe, Zanussi-Electrolux , undertake that if within12 months of the date of the purchase this Za-nussi-Electrolux appliance or any part thereofis proved to be defective by reason only of faultyworkmanship or materials, we will, at our optionrepair or replace the same FREE OF CHARGEfor labour, materials or carriage on conditionthat:• The appliance has been correctly installed

and used only on the electricity supply statedon the rating plate.

• The appliance has been used for normal do-mestic purposes only, and in accordancewith the manufacturer's instructions.

• The appliance has not been serviced, main-tained, repaired, taken apart or tamperedwith by any person not authorised by us.

• Electrolux Service Force Centre must un-dertake all service work under this guarantee

• Any appliance or defective part replacedshall become the Company's property.

• This guarantee is in addition to your statutoryand other legal rights.

Exclusions• Damage or calls resulting from transporta-

tion, improper use or neglect, the replace-ment of any light bulbs or removable partsof glass or plastic.

• Costs incurred for calls to put right an appli-ance which is improperly installed or calls toappliances outside the United Kingdom.

• Appliances found to be in use within a com-mercial environment, plus those which aresubject to rental agreements.

• Products of Electrolux manufacturer that arenot marketed by Electrolux

Service and Spare PartsIn the event of your appliance requiring service,or if you wish to purchase spare parts, pleasecontact your local Service Force Centre by tel-ephoning0870 5 929 929Your telephone call will be automatically routedto the Service Force Centre covering your post-code area.For the address of your local Service ForceCentre and further information about ServiceForce, please visit the website atwww.serviceforce.co.ukBefore calling out an engineer, please ensureyou have read the details under the heading"Something not working"When you contact the Service Force Centreyou will need to give the following details:1. Your name, address and postcode.2. Your telephone number.3. Clear concise details of the fault.4. The model and Serial number of the appli-

ance (found on the rating plate).5. The purchase date.Please note a valid purchase receipt or guar-antee documentation is required for in guaran-tee service calls.Customer CareFor general enquiries concerning your Electro-lux appliance, or for further information on Elec-trolux products please contact our CustomerCare Department by letter or telephone at the

24

address below or visit our website atwww.electrolux.co.ukCustomer Care Department Electrolux MajorAppliances Addington Way LutonBedfordshire, LU4 9QQ Tel: 08705 727 727 (*)(*) Calls may be recorded for training purposes

European GuaranteeThis appliance is guaranteed by Electrolux ineach of the countries listed at the back of thisuser manual, for the period specified in the ap-pliance guarantee or otherwise by law. If youmove from one of these countries to another ofthe countries listed, the appliance guaranteewill move with you subject to the following qual-ifications:-• The appliance guarantee starts from the

date you first purchased the appliance whichwill be evidenced by production of a validpurchase document issued by the seller ofthe appliance.

• The appliance guarantee is for the same pe-riod and to the same extent for labour andparts as exists in your new country of resi-dence for this particular model or range ofappliances.

• The appliance guarantee is personal to theoriginal purchaser of the appliance and can-not be transferred to another user.

• The appliance is installed and used in ac-cordance with instructions issued by Elec-trolux and is only used within the home, i.e.is not used for commercial purposes.

• The appliance is installed in accordance withall relevant regulations in force within yournew country of residence.

The provisions of this European Guarantee donot affect any of the rights granted to you bylaw.

www.electrolux.com

Albania +35 5 4 261 450 Rr. Pjeter Bogdani Nr. 7 TiraneBelgique/België/Belgien +32 2 363 04 44 Bergensesteenweg 719, 1502

LembeekČeská republika +420 2 61 12 61 12 Budějovická 3, Praha 4, 140 21Danmark +45 70 11 74 00 Sjællandsgade 2, 7000 FredericiaDeutschland +49 180 32 26 622 Muggenhofer Str. 135, 90429

NürnbergEesti +37 2 66 50 030 Mustamäe tee 24, 10621 TallinnEspaña +34 902 11 63 88 Carretera M-300, Km. 29,900 Al-

calá de Henares MadridFrance www.electrolux.fr

25

Great Britain +44 8705 929 929 Addington Way, Luton, Bedford-shire LU4 9QQ

Hellas +30 23 10 56 19 70 4, Limnou Str., 54627 Thessaloni-ki

Hrvatska +385 1 63 23 338 Slavonska avenija 3, 10000 Za-greb

Ireland +353 1 40 90 753 Long Mile Road Dublin 12Italia +39 (0) 434 558500 C.so Lino Zanussi, 26 - 33080 Por-

cia (PN)Latvija +37 17 84 59 34 Kr. Barona iela 130/2, LV-1012,

RigaLietuva +370 5 2780609 Ozo 10A, LT 08200 VilniusLuxembourg +352 42 431 301 Rue de Bitbourg, 7, L-1273 HammMagyarország +36 1 252 1773 H-1142 Budapest XIV, Erzsébet

királyné útja 87Nederland +31 17 24 68 300 Vennootsweg 1, 2404 CG - Alphen

aan den RijnNorge +47 81 5 30 222 Risløkkvn. 2 , 0508 OsloÖsterreich +43 18 66 400 Herziggasse 9, 1230 WienPolska +48 22 43 47 300 ul. Kolejowa 5/7, WarszawaPortugal +35 12 14 40 39 39 Quinta da Fonte - Edificio Gon-

çalves Zarco - Q 35 -2774-518Paço de Arcos

Romania +40 21 451 20 30 Str. Garii Progresului 2, S4,040671 RO

Schweiz - Suisse - Svizzera +41 62 88 99 111 Industriestrasse 10, CH-5506 Mä-genwil

Slovenija +38 61 24 25 731 Gerbičeva ulica 98, 1000 LjubljanaSlovensko +421 2 43 33 43 22 Electrolux Slovakia s.r.o., Electro-

lux Domáce spotrebiče SK, Se-beríniho 1, 821 03 Bratislava

Suomi www.electrolux.fiSverige +46 (0)771 76 76 76 Electrolux Service, S:t Göransga-

tan 143, S-105 45 Stockholm

26

Türkiye +90 21 22 93 10 25 Tarlabaşı caddesi no : 35 Taksimİstanbul

Россия +7 495 937 7837 129090 Москва, Олимпийскийпроспект, 16, БЦ "Олимпик"

27

www.electrolux.com

156996230-00-23032007 Subject to change without notice