user manual 1.1 - theinnovationmachine.com learning library/cad_scanner_us… · copyright enspirea...
TRANSCRIPT
-
COPYRIGHT ENSPIREA LLC. ALL RIGHTS RESERVED 1
User Manual 1.1.1175
-
COPYRIGHT ENSPIREA LLC. ALL RIGHTS RESERVED 2
Table of Contents
1. How to use CAD SCANNER
2. CAD SCANNER Step-by-step instructions
3. How to recover from an unexpected shutdown
6. Error messages
7.Available CAD Files
4. How to update your software subscription license
5. Color Samples
8.Update Information
-
COPYRIGHT ENSPIREA LLC. ALL RIGHTS RESERVED 3
How to use CAD SCANNER
Follow steps 1 through 10 above. Detailed information about the steps is on the following page.
Step 11 is used only when you want to restart the exporting process after an unexpected shutdown.
Step 12 is used only when you purchase the product.
2
1
3
6 4 5
7
8
9 11
12
10
-
4 COPYRIGHT ENSPIREA LLC. ALL RIGHTS RESERVED
Click in the check box to include CAD data in subfolders as well as the main folder.
Click the “select folder” button. A dialog box will appear. Select the input folder where your CAD data is
located.
Click on the “select folder” button. A dialog box will appear. Select the output folder where pictures and reports should be stored.
Click the check box if you need to export a part(s) list.
Parts list sample:
1
2
3
4
Check Box:ON Check Box:OFF
Selected folder
Subfolder
Data included in the
export
CAD SCANNER step-by-step instructions
-
5 COPYRIGHT ENSPIREA LLC. ALL RIGHTS RESERVED
Click the check box if you need to export a part sheet(s).
Select a part color for the exported part images.
Click in the check box if you wish to attach your company logo. Then, click on the “select file” button to
upload your company logo. It will appear on the top left of each part sheet .
Click in the check box if you wish to attach your company logo. Then, click on the “select file” button to
upload your company logo. It will appear on the top left of each part sheet .
The appearance of the selected color may be different due to the
influence of the computer’s light source.
Please refer to the color samples below.
5
6
7
8
CAD SCANNER step-by-step instructions
Part sheet sample (each file is generated for each part.)
-
6 COPYRIGHT ENSPIREA LLC. ALL RIGHTS RESERVED
CAD SCANNER step-by-step instructions
Start the calculation by clicking the “Export” button. A part(s) list, part sheet(s) and images will be
generated.
Click the check box if you need to remove the lines such as the reference line to get zoomed-in part
images.
9
10
-
7 COPYRIGHT ENSPIREA LLC. ALL RIGHTS RESERVED
How to recover from an unexpected shutdown
Click the check box if you want to restart the exporting process after an unexpected shutdown.
The message below will appear when CAD SCANNER is launched after an unexpected shutdown .
If you want to change the recovery option on the CAD SCANNER interface:
You can still click the check box after answering No to the question above.
To restart the Exporting process using the log data : CHECK ON
New Exporting not using log data: CHECK OFF
.
CAD SCANNER always creates log data so that you can restart the exporting from the point at which CAD
SCANNER shut down. However, please note that newly-added data after the shutdown isn’t recognized.
When you click “Yes”, the check box is automatically checked.
11
-
8 COPYRIGHT ENSPIREA LLC. ALL RIGHTS RESERVED
How to update software subscription license
After you purchase the license, you will receive the license file through email. To update your software
subscription license, click on the hyperlink “ Update License File”. Select the license file that you received.
Expiration date on the bottom of the interface will be extended after selecting the file.
A trial version is available that expires in 30 days or after 30 files are exported.
In the Trial version, the exported images include CAD SCANNER logos.
12
-
9 COPYRIGHT ENSPIREA LLC. ALL RIGHTS RESERVED
Color Samples
Color RGB Image Sample
R:255
G:0
B:0
R:0
G:255
B:0
R:0
G:0
B:255
R:128
G:128
B:128
R:192
G:192
B:192
-
10 COPYRIGHT ENSPIREA LLC. ALL RIGHTS RESERVED
2.UNEXPECTED
Error Messages
As output logs, Report.csv is created in the same folder as the images. If there is an errors,
you will see the error message in the Report.csv file:
1.CAN'T READ
Failure to read the CAD file.
Failure to calculate the CAD image.
3.CAN'T CREATE
Failure to create the file because there is a file with the same name in the output folder.
-
11 COPYRIGHT ENSPIREA LLC. ALL RIGHTS RESERVED
Available CAD Files
CAD SCANNER can read CAD files below without using CAD systems.
CAD Name Extensions CAD version
ACIS .sat, .sab, .asat, .asab ACIS 1.0 - ACIS R22
CGM .xcgm Compatible with CGM R2012 and R2013
CATIA V4 .model, .exp, .session CATIA 4.1.9 – CATIA 4.2.4
CATIA V5 .CATPart, .CATProduct R6 – R21
Inventor .ipt 6 – 2012
.iam 11 – 2012
Parasolid .x_t, .xmt_txt, .x_b, .xmt_bin
10 – 24.0.133
Pro/E (Creo Parametric)
.prt, .prt.*, .asm, .asm.* 16 – Wildfire 5
SolidWorks .sldprt, .sldasm 98 – 2011
Unigraphics .prt 11 to 18, NX to NX8
XML E-BOM .xml
IGES .IGS
STEP .STEP, .stp
STL .stl
-
12 COPYRIGHT ENSPIREA LLC. ALL RIGHTS RESERVED
Update Information
ID Description Version Date
1 V1.0 is released. V1.0 5/16/2012
2 Calculation speed has been improved. V1.0.1074 5/25/2012
3 Enhanced CAD file reader V1.1.1175 7/20/2012