user guideuser guide - w9tech.com omicron lite and o-phos vaporizers are the industrys leading,...

User GuideUser Guidecheck on line for the newest version of this guide. version 1.3

The Omicron Lite and O-PHOS vaporizers are the industrys leading, non-flame poweredportable extract vaporizers. The originals to use pure extract oils with no need for carrier agents or cotton. The ceramic cartridges are an advanced design, that provide voluminous vapor clouds while using very little of your extract oils.

Omicron Lite & O-PHOS Safety LockoutOmicron Lite & O-PHOS Safety LockoutTo toggle the lockout feature of the power button on your Omicron Lite/O-PHOS, quickly press the power button 5 times within 3 seconds until the blue light flashes 3 times. To test the current on/off state, just press the power button once. If the blue light comes on the lockout is deactivated. The safety lockout feature is great to prevent your Omicron Lite/O-PHOS from accidentally turning on.

Omicron Lite & O-PHOS User GuideOmicron Lite & O-PHOS User Guide

Specs

Durable connector

Low Voltage Warning, light will blink 3 times when the cell (battery) voltage is under 3.0v

Reverse Current Protection

Short-circuit protection current： <20mA LED will blink 3 times

Quiescent current: <10uAOutput current: 0A－3.5AInput voltage: 3.0Ｖ－4.2ＶOutput voltage = the internal battery voltage

Included in your kit

WARNING!! Cartridges are HOT duringand after use. Do Not touch the cartridge until after it has cooled off.

1 x Omicron Lite/O-PHOS Rugged Carrying Case

1 x 2.0 Ohm KISS Cartridge

1 x USB Charging Cable

1 x Omicron Lite or O-PHOS Vaporizer

Expanded View

Basecap

Omicron Lite

Copyright Utopia Planitia Technologies 2014 Distributed by © www.w9tech.com

O - PHOS

HeatSheild

Plug the USB cable into the USB port on the bottom of the Omicron Lite/O-PHOS.

2.Unscrew the Omicron Lite/O-PHOSbase cap by turning it counter clockwise.

Basecap

Omicron Lite

Charging Instructions

1.

Red Light on means Omicron Lite/O-PHOSis charging

No Red Light on means Omicron Lite/O-PHOS is not charging or is already charged

Bottom of Omicron Lite/O-PHOS3.

Basecap

Omicron Lite



Omicron Lite/O-PHOS use a USB pass-thru charging system. This allows them to beused while charging. The Omicron Lite/O-PHOS is always powered by its built in lithium ion cell, even while connected to the USB charger.

O - PHOS O - PHOS

KISS cartridges work best with stable concentrates, solidor thick and not runny at room temperature

Prerequisites:

●

● Avoid getting concentrates on any threaded areas

● Non metallic applicator recommended to avoid damage to the heating coil during concentrate application

1. Pull mouthpiece away from KISS cartridge main body and unscrew mouthpiece holderfrom KISS cartridge main body by turning mouthpiece holder counter clockwise.

KISS Cartridge Filling Instructions

Page 3Copyright Utopia Planitia Technologies 2014 Distributed by © www.w9tech.com


UP TECH

Mouthpiece

MouthpieceHolder

KISS CartridgeMain Body

O-PHOSKISS Cartridge

UP TECH

Mouthpiece

MouthpieceHolder


Omicron LiteKISS Cartridge

Prerequisites:

2. Load 0.1 - 0.3 grams of concentrate by dropping on to heater coil or gently applyconcentrate using a non metallic applicator.




Apply Concentrateto shaded area

WARNING!! Do Not touch the heatingcoils with a metallic applicator ordamage may result.

Top Down View

Prerequisites:

3. Screw mouthpiece holder back on toKISS cartridge main body by turning mouthpiece holder clockwise. Re-insertmouthpiece into mouthpiece holder.




UP TECH

Mouthpiece

MouthpieceHolder



UP TECH

Mouthpiece

MouthpieceHolder



Prerequisites:

4. Screw KISS cartridge onto OmicronLite/O-PHOS in a clockwise direction.




UP TECH

Assembled KISS Cartridge


UP TECH


O - PHOS

Assembled KISS Cartridge

Omicron Lite

Omicron Lite/O-PHOSPrerequisites: ●● KISS Cartridge already filled with no less than 0.1 grams and no more

than 0.3 grams of extract and attached to your to your Omicron Lite/O-PHOS

1. Using your lungs, slowly inhale while holding down the power button for nolonger than 5 seconds at a time. For maximum cartridge life expectancy, wait 20 seconds to allow coil to cool between hits and never run coil dry. Always allow the cartridge to cool between hits.

!!WARNING!! Cartridge is HOT during use, avoid touching it.

KISS Cartridge Use

Page 7

* PRO TIPKeep cartridge standing upright when warm and keep pullingair through it to cool it down faster.


KISS Cartridge UseOmicron Lite & O-PHOS User GuideOmicron Lite & O-PHOS User Guide

UP TECHUP TECH

O - PHOSOmicron Lite

Maintenance Instructions

C.

B.

A.

Depending on your frequency of usage, the electrical contact points should be cleaned at leastonce every 3 - 7 days. The Omicron Lite/O-PHOS vaporizer uses relatively low voltage to operate and even a small amount of residue on the contact points and/or threads can reduce the voltage flow, impeding the performance of your Omicron Lite/O-PHOS. Any residue bridging the gap between the threads and center post on your Omicron Lite/O-PHOS, could cause a very dangerous electrical short resulting in physical injury to yourself and damage to the battery and/or your Omicron Lite/O-PHOS Keep It Clean !

After every thing is completely dry, lightly touch the contact areas and threads with your fingers. If you feel any tacky areas, please repeat the cleaning procedure steps A - C againuntil all the contact areas and threads are tack free.

Once cleaned, use the dry end of the cotton swab to help the drying process by gently running it over the areas just cleaned. Be careful that no cotton gets left behind on anysurfaces or threads.

Using the ISO dampened end of the cotton swab, gently scrub and clean any residue from allthe contact surfaces and threads on all your cartridges and Omicron Lite/O-PHOS The contact surfaces are all the areas that make contact with each other when a cartridge isscrewed into the Omicron Lite/O-PHOS

To clean the electrical contact points and threads, take a cotton swab (Q-Tip) and dip one endinto some Isopropyl Alcohol (ISO). The higher percentage of purity, the better, try to use asclose to 99% ISO as you can.

By following these simple maintenance steps, you will keep your Omicron Lite/O-PHOS Vaporizer performing at peak performance.

Your Omicron Lite/O-PHOS Vaporizer has been designed to be easy to care for and maintain.

DO: Use ISO to clean the contact areas and threads on all your cartridgesDO: Use ISO to clean the contact areas and threads on your Omicron Lite/O-PHOSDO: Keep your Lithium Ion battery in the Omicron Lite/O-PHOS charged and in good physical conditionDON’T: Submerse your cartridge, Omicron Lite/O-PHOS, USB cable or charger in any liquidDON’T: Try to clean out a cartridge by filling it with ISODON’T: Leave behind any lint or cotton on the cleaned surfaces or threadsDON’T: Screw a cartridge on to the Omicron Lite/O-PHOS with out cleaning both firstDON’T: Use a longer or different USB cable than the one suppliedAVOID: Using cartridges that have had their coils damaged and/or thin oil put in them, causing them to leak.



UP T

ECH

UP

TECH

O - PHO

S

Omicron Lite

Q. My cartridge is leaking, what can I do?

A.

Q. My cartridge is defective, what can I do?

A. We recommend to test every cartridge before use by connecting it to the Omicron Lite/O-PHOSbefore filling it with extracts. You can hold down the power button while looking at the coil in adark area. You should see the coil start to glow, let go of the power button immediately to avoiddamaging your KISS cartridge.There are no refunds or exchanges on cartridges for hygienic reasons other than DOA if reported within 24 hours of receipt.

Q. I hear bubbling sounds when I inhale, is this normal?

A. No, bubbling is caused by extract that is too thin at room temperature and/or has impurities in itfrom not being processed / purged correctly. These extracts are not recommended and will causeyour cartridge to clog, leak and generally under perform.

Q. What types of essential oils can I use?

A.

Q. What are the DO’s and DON’T’s?

A. DO: Check your Omicron/O-PHOS for physical damage such as damaged buttons before useDO: Pull air through the cartridge SLOWLYDON’T: Blow air into the cartridgeDON’T: Get any oils, waxes etc. on to the threads during fillingDON’T: Excessively heat the KISS cartridge by holding the power button for more than 5 secondsDON’T: Inhale hard, you will suck extract into the mouthpieceAVOID: Extract oils that are too thin or runny at room temperature, or poorly processed / purged

Q. Will the KISS cartridges fit other ecig batteries?

A.

FAQ’s

The refillable Pure KISS Extract cartridges were specifically designed for the Omicron, Omicron v2, v2.5, Persei, Omicron Lite and O-PHOS only.

Any essential oil that will liquefy with heat and thicken at room temperature that contains minimalplant material. There should be minimal amounts of plant material left in the extract i.e. earwax, putty, shatter, cO2, nitro etc.

Q. My cartridge is leaking, what can I do?

A. The most common reasons for leaking cartridges are:Overheating the cartridge by holding the power button for more than 5 secondsBlowing air into the cartridgeInhaling too hard, try sucking slowly and lightlyOver filling the cartridge, 0.3 grams is the maximum capacityUsing oil that is too thin or low quality / poorly processed / purged will leak



UP T

ECH

UP

TECH

O - PHO

S

Omicron Lite

Q. How long does the battery take to charge?

A.

Q. How long does the battery last?

A. The battery is guaranteed for 14 days and a fully charged battery will last for about 2004 second hits. Our duration is a conservative figure, based on half of the calculated number.The calculation you can use to estimate your number of hits based on your hit length is:A 3.7 V battery and a 2.0 ohm cart will draw about 1.85 amps of current. (I=V/R)So a 1000 mAh battery will last about 0.65 hr (1.0 amp-hr/1.85 amps) or about 32 minutes of use. 2 second hits = 960 hits3 second hits = 640 hits4 second hits = 480 hits

Q. My blue light flashes as soon as I press the button, what is causing this?

A. If the blue light flashes as soon as you press the button, that is either the low battery warning signal or a short condition somewhere. If your battery is depleted, charge your Omicron Lite/O-PHOS immediately and fully charge it before using it again. If the blue light continues to flash with a fully charged battery, please contact support.

The answer to this depends on the remaining charge still left in your battery and which battery type you are charging. For an empty battery to fully charge requires approx. 3.5 hours. When in charging mode, the light on the Omicron Lite/O-PHOS base will be solid Red and once charging has completed the light will turn off.

Q. How long is the warranty on the Omicron Lite/O-PHOS?

A. The Omicron Lite/O-PHOS has a one year Warranty against manufacturer defects. The charger is guaranteed for 30 days and batteries for 14 days. Your invoice from an authorized dealer is needed for any warranty claims.

Any vaporizer unit or attachment bought from anyAny vaporizer unit or attachment bought from anyauction site such as eBay, Amazon etc. or sites thatauction site such as eBay, Amazon etc. or sites thatundercut the manufacturers MSRP will not haveundercut the manufacturers MSRP will not havea warranty.a warranty.

Q. How long does a KISS cartridge last?

A. They will last a variable amount of time based on many factors. Battery voltage level, amount of time power button is held down for, material being vaporized, amount of cooling time betweenhits etc.


FAQ’s


UP T

ECH

UP

TECH

O - PHO

S

Omicron Lite

user guideuser guide - w9tech.com omicron lite and o-phos vaporizers are the industrys leading,...

Documents