user guide washing machine

7/30/2019 User Guide Washing Machine

1/25

Manual de instalacin y uso de la lavadoraManuel dinstallation et dutilisation de lappareil

Manual de instalao e utilizao da mquina de lavar roupaWashing machine installation and operation manual


2/25

70

71

72

76

86

88

91

WARNINGS

SPECIFICATIONS

INSTALLATION AND ASSEMBLY

USING THE APPLIANCE.PRACTICAL TIPS

MAINTENANCEAND CLEANING

SAFETYAND TROUBLESHOOTING

ENVIRONMENTALWARNINGS

washing machinecontents

48

49

50

54

64

66

69

ADVERTNCIAS

QUADRO TCNICO

INSTALAO E MONTAGEM

UTILIZAO DO APARELHOE CONSELHOS PRTICOS

MANUTENO

E LIMPEZA DO APARELHOSEGURANAE SOLUO DE PROBLEMAS

ADVERTNCIAS SOBREO MEIO AMBIENTE

mquina de lavar roupandice


3/25

70

warnings

This washing machine comes with a

manual that includes operating, maintenanceand installation instructions. Please read allthe instructions before using the washingmachine.

Do not wash items that have previouslybeen cleaned, washed, soaked or treatedwith petrol, solvents for dry cleaning, otherinflammable substances or explosives, asthey produce fumes that could catch fire orexplode.

Do not add petrol, solvents for dry cleaningor other inflammable or explosive substancesto the wash water as they produce fumesthat could catch fire or explode.

Do not repair or replace any part of thewashing machine or try to carry out any typeof servicing unless it is recommended in themaintenance instructions in the manual.

Do not climb onto the machine or stand

on the open hatch door.

To reduce the risk of fire and electric shockdo NOT use an extension lead or adaptorto connect your washing machine to themains supply.

The machine should only be used for thepurpose it is designed for.

Follow the washing instructionsrecommended by the manufacturer of the

garment to be washed.

Do not turn your washing machine on untilyou are sure that:

It has been installed in accordance withthe installation instructions.

All the water, drainage, mains electricityand earth connections meet the localregulations and/or other applicableregulations.

To avoid the risk of fire, electric shocks, injury or damage when using your washingmachine, please take the following precautions:


4/25

71

washing machine

Water inlet hose.

specifications

Power

cord

Control

panel

Detergent

dispenser

Stainless

steel drum

Accesible filter(behind kickplate)

Kickplate

Drain hose

Hatch

Adjustablefeet

Work top

ACCESSORIES


5/25

72

washing machine

a Remove the screws holding the plasticcovers to the back of the washingmachine.

b Loosen and remove the 3 blockingscrews.

c Cover the holes with the plastic coversyou have just removed.

installation and assembly

Do not throw the blocking screwsaway. You may need to move the

washing machine at a later date.

Important

a/c

a Remove the base, corner protectors andtop cover.

1 UNPACKING ANDUNBLOCKING THEWASHING MACHINE

UNBLOCKING

UNPACKING

a


6/25

DRAINAGE

CONNECTION

73

CONNECTION TO THE MAINS WATER SUPPLY ANDDRAINAGE

The water supply hose is inside the drum:

a Connect the bent end of the hose to thethreaded inlet of the electrovalve locatedat the rear of the washing machine.

b Connect the other end of the hose to

the water intake. Then securely tightenthe connection nut.


It is important that the drain hosebend is correctly fastened to theoutlet, to prevent any risk of itbecoming detached and causingflooding.

If your washing machine has a hotwater intake, connect the hose withthe red threaded end to the hot watertap, and to the electrovalve with thered filter.

The washing machine must beconnected to the mains water supply,using the new supply hoses suppliedwith the appliance. Do not use watersupply hoses that have been usedbefore. For your washing machine towork properly, the mains water

pressure must be between 0.05 and1MPa (0.05 and 10 Kgr/cm2).

a

a It is recommended that you have a fixeddrainage outlet 50 to 70 cm from thefloor.Avoid the drain hose being too tight,kinked or restricted.

2

Important

CONNECTION TO THE

MAINS WATER SUPPLY


7/25

Important

Use the adjustable feet to level thewashing machine. This will reducethe noise level and prevent it frommoving during use.

Do not bring the feet too far out, youwill achieve better stability.

You need to use a spanner for themodels that have a nut.

Important

74

LEVELLING THE WASHING MACHINE AND CONNECTINGIT TO THE MAINS ELECTRICITY SUPPLY


3

Consult the specifications plate located on thehatch door of the washing machine beforemaking the electrical connections. Ensure thatthe voltage reaching the plug is the same as

that on the plate.Do not remove the specifications plate.The information on it is important.

ELECTRICAL CONNECTION

LEVELLING

It is very important to correctly earth thewashing machine. The electricalinstallation, plug, socket, fuses orautomatic switch and counter must becorrectly dimensioned for the maximumpower indicated on the specificationsplate.

Do not plug the washing machine plug

into the socket with wet or damp hands.

To remove the power cord, pull on thebody of the plug.

If the power cord is damaged, it must bereplaced by a cord or special unit providedby either the manufacturer or your after-sales service.

With built-in washing machines, the plug

must be accessible after installation.


8/25

When your washing machine has beencorrectly installed, we recommend that youpre-clean the machine.

This is to check that the installation, theconnections and the drainage are all correct,and to thoroughly clean the inside of thewashing machine before any washprogrammes are run (see the operatinginstructions on the following pages).

a Press ON/OFF button.

b Select the normal programme at 60C.

c Press the start/pause button.

75

INSTALLING THE WASHING MACHINE UNDER A KITCHENWORKTOP AND PRE-CLEANING

INSTALLATION UNDER

A WORKTOP

4

PRE-CLEANING

a

b

c

a

Your washing machine may be fittedunderneath a kitchen worktop.

If you need to remove the washing machinesworktop, for safety reasons you need to fit aprotection plate which you can obtain from

your Dealer or Technical Assistance Service.

Follow these steps to fit the plate:

a Remove the washing machine work topby taking out the side screws and movingit gently back.

b Take out the screws and remove theparts holding the worktop in place.

c Put the protection plate into place andscrew it to the washing machine so it

can then be inserted in the place youwish, fitting spongy adhesive all aroundthe perimeter first to prevent noise.

c

b


9/25

PREPARATION

76

washing machine

a Sort the clothes according to fabricand how they are made:We recommend using the delicateprogrammes for sensitive fabrics. Thereis a special wool programme forwoollens.

b Sort clothes according to how soiledthey are. Wash lightly soiled garments using ashort programme. Use a programme without prewashfor medium-soiled garments. Wash heavily soiled garments using along programme with prewash.

a Sort your clothes according to colour.Wash whites and coloured separately.

using the appliance and practical tips

Important

Make surebeforehandthat yourwoollens can

be machine-washed.

Before placing the clothes in thedrum, make sure all the pockets areempty.

Any small objects may block the drainpump.

Prewash

Wash

Wash

1 PREPARINGGARMENTS FORWASHING

30

60

90

40

Cold

Imp

ortant

We recommend loading the washingmachine to its full capacity. Thismeans savings on water and energy.

Whenever possible, we recommendthat you wash garments of differentsizes within the same washprogramme. This improves thewashing action and also aids thecorrect distribution of the garmentsin the drum when spin-drying, andthe washing machine will thereforebe quieter.

It is a good idea to put small garmentsin a wash bag.

SORTING THE CLOTHES

Important


10/25

DETERGENT AND

ADDITIVES

77

a Your washing machines detergentdispenser has three compartments.

b Put the detergent or additive into thedetergent dispenser before starting thewash programme.

c Liquid detergents may also be used inthis washing machine. An optionaldetergent dispenseris to be used forthis, which can be obtained from theTechnical Service Network.

Place this optional dispenser inside thewash compartment.

The level of liquid must never behigher than the MAX mark printed onthe dispenser wall.

Remember that the amount of detergent tobe used will always depend on:

The amount of clothes to be washed.How heavily the clothes are soiled.The hardness of the water (Information on

water hardness in your area can be obtainedfrom the competent local authorities).

We recommend the use of adecalcifying product if the waterhardness is high in your area.

2 USING DETERGENT AND ADDITIVES

eco-note


Remember that concentrated detergentsexist which are more environment- andnature-friendly.

The use of more detergent thannecessary will not improve you

washing results, and apart from costing

you money it will have a negative effecton the preservation of the

environment.

We therefore recommend you followthe detergent manufacturers

instructions.

Wash Fabric softenerPrewash

a

Important

Important

b

c


11/25

78

3 SELECTING THE WASHPROGRAMME


To select a wash programme, proceed asfollows:

a Switch the washing machine on bypressing ON / OFF.

b Activate the programme selector by

pressing it to release it (depending onthe model).

c Select the wash programme by turningthe programme selector (see programmetable).

a

programmeselector

start/pausebutton

additionalfunctionbutton

timedelaybutton

spin andanti-creasebutton

screen

detergent dispenser

screen

ON/OFFbutton

b

c


12/25

79


When you select the programme, the followinginformation will be displayed:

1 Wash programme phasesPrewashWashRinseSpin-drying

2 No. of revolutions

3 Programme No. (for a few seconds)and then its duration.

4 Additional functionsEasy ironExtra rinseIntensive wash

There are four types of programme:

Normal programmesDelicate programmesWool programmesAuxiliary programmes

We recommend you choose a washprogramme without prewash wheneverpossible. This will save you money andhelp protect the environment.

eco-note

1

2 3 4

1

2 3 4

Normal Delicate Wool Auxiliary

PROGRAMMES

Normal cold

Quick 30C

Normal 30C

Normal 40C

Normal 60C

Normal 90CPrewash 60C

Delicate cold

Delicate 30C

Delicate 40C

Delicate 60C

Wool cold

Wool 35C

Rinses

Spin-drying

Drain/End

1

2

3

4

5

67

8

9

10

11

12

13

14

15

16


13/25

(*) Programme for wash and energy consumption assessmentin accordance with standard EN60456, press intensive washbutton. 80

Cotton/LinenCold delicate colours YES 5/6

very light soil

Cotton/Linenwhites/colours YES NO YES 1.5very light soil

Cotton/Linendelicate colours YES 5/6light soil

Cotton/Linenfast colours YES 5/6light soil

Cotton/Linenfast colours YES 5/6medium soil

Cotton/Linenwhites YES 5/6heavy soil

Cotton/Linenwhites/fast colours YES 5/6heavy soil

Synthetic/mix cottonCold delicate colours YES 3

very light soil

Synthetic/mix cottondelicate colours YES 3light soil

Synthetic/mix cottondelicate colours YES 3medium soil

Synthetic/mix cottonwhites/fast colours YES 3medium soil

Wool/wool mixWOOL cold whites/colours YES NO YES 1

very light soil

Wool/wool mixWOOL 35 whites/colours YES NO YES 1

light soil

Cotton/cotton mix Synthetic/Delicate YES NO YES 5/6

Wool/wool mix

Cotton/cotton mix Synthetic/Delicate NO YES NO 5/6

Wool/wool mix

Cotton/cotton mix Synthetic/Delicate NO 5/6Wool/wool mix

ProgrammeRecommended

temperatureFabric type

Max load

of clothes

(Kg)

Possible option buttons

Extra

rinse

Intensive

wash

Easy-iron

Spinspeed

selection

No

spin

Anti-crease

1

2

3

4

5 (*)

6

7

8

9

10

11

12

13

14

15

16

Normal cold

Quick 30C

Normal 30C

Normal 40C

Normal 60C

Normal 90C

Prewash 60C

Delicate cold

Delicate 30C

Delicate 40C

Delicate 60C

Wool cold

Wool 35C

Rinses

Spin-drying

Drain/End

Normalprog.

Delicateprog.

Woolprog.

A

uxiliaryprog.

30

30

40

60

90

60

40

60

40

3030


14/25

NOTE: the KWh and litre consumptions and programme durations may vary dependingon the type and amount of clothes, mains water pressure, etc.

81

6 Kg

Wash

product

compartment

Programme

description

TURBO TIME TURBO TIME PLUS

Approx.duration(minutes)

Total consumption KWh/Litres

5 Kg 6 Kg

Totalconsumption

KWh/Litres

Approx.duration(minutes)

Normal wash, rinses,automatic additive absorption if 0,15/46 0,15/49 60 0,10/49 50desired and long final spin

SHORT wash, rinses,automatic additive absorption if 0,20/25 0,20/30 30 0,20/30 30desired and long final spin

0,35/46 0,40/49 82 0,20/49 52

Normal wash, rinses, 0,60/46 0,65/49 87 0,50/49 57automatic additive absorptionif desired andlong final spin

A: 0,95/46 1,02/49 91 1,02/49 70A+: 0,85/46

1,60/51 1,90/55 120 1,90/49 110

Prewash, normal wash, rinses,automatic additive absorption if 1,40/55 1,45/60 105 1,40/49 100desired and long final spin

0,15/50 0,15/55 55 0,10/49 55

Delicate wash, rinses, 0,35/50 0,35/55 55 0,20/49 55automatic additive absorptionif desired andgentle final spin

0,55/50 0,60/55 60 0,40/49 60

0,95/50 1,00/55 70 0,90/49 70

WOOL wash, rinses, 0,05/60 0,05/60 30 0,05/52 30

automatic additive absorptionif desired andgentle final spin

0,45/60 0,50/60 40 0,40/52 40

Rinses, automatic additiveabsorption if desired and 0,05/25 0,05/30 23 0,05/30 23long final spin

Drain and final long spin 0,05/0 0,05/0 10 0,05/0 10

Drain and end of programme. Takes programme to 0,00/0 0,00/0 2 0,00/0 2final position

Check on your control panel if your washing machine is Turbo Time Plus or Turbo Time


15/25

82

4 SPIN SPEED SELECTIONusing the appliance and practical tips

SPIN-DRYING

The wash options must always be selectedafter choosing the wash programme. Anyprogramme change during selection cancelsthe previously selected options.

a Spin speed selection and anti-creasebutton

The programme selected is associated

with certain spin revolutions, as shownon the display.

b It can be modified by pressing the spindrying button and the number ofrevolutions will be reduced by 100revolutions at a time to 400.

c No spinPress the spin button again to get to theno spin option. A programme without afinal spin. It is used to prevent creasing

when washing special fabrics.

d Anti-crease optionThe wash programme stops on the lastrinse, with the clothes left in water. Whenthe function is deactivated, the washingmachine continues the programme,draining and spin-drying.It is used, for example, when you arenot at home and want to delay the spin-drying until you get home, to preventthe clothes creasing after spin-drying

and being left in the drum to be removed.

Select

b

SelectSelect

a

Select

c

d

Select


16/25

83

Time delay selection buttonA delay of up to 24 hours can be selected.The delay must be selected after choosing thewash programme.The select the delay time, press the clockbutton. Each time the button is pressed thestart will be put back 1 hour.

Cancelling the delayTo cancel the delay you have to press theclock button successively. The delay will becancelled when 24 hours have been reachedand the button is pressed once more. If theprogramme is changed the delay is alsocancelled.

5 TIME DELAY SELECTION ANDADDITIONAL FUNCTIONS

using the appliance

Additional function selection buttondepending on programmes.

a There are 3 options: easy-iron, extrarinse and intensive wash.Press the select button to view thedisplay the option required.

b By pressing the button several times youcan choose between severalcombinationsof one, two and up to threeadditional functions at the same timedepending on the programme selected.

Button: Easy-ironThis option prevents garments from

creasing by means of carrying out aspecial programme with special turns tofluff out the garments after spin-dryingand make them easier to iron.

Button: Extra rinseIncreases the level of the final rinseobtained in the clothes; suitable for largeloads and garments belonging to peoplewith sensitive skin. Increases waterconsumption!

Button: Intensive washThis option, specially recommended for

heavily soiled, stained clothes, achievesbetter results by extending the normalwash cycle.

TIME DELAY

ADDITIONAL FUNCTIONS

Select

Select

If during the additional function selection, theprogramme is changed or the ON/OFF buttonis pressed, all the functions selected untilthen are cancelled.

Imp

ortant

Select


17/25

84

Start/pause button

a To start up the washing machine youhave to press the start/pause button.The display will constantly show theminutes left until the wash is over.

6 STARTING UP ANDBLOCK FUNCTION SELECTION

using the appliance

STARTING UP

Block function selectionThe various buttons can be blocked to preventthem from being pressed and affecting theselected wash programme and options. This

can be used to stop children playing with thebuttons, etc.The block function should be activated afterthe wash programme has been selectedtogether with all its options.

Activating the block function

a The block function is activated bypressing the start/pause button andholding it down for at least 3 seconds.The display will show if it is activated.

Deactivating the block functionb The block function is cancelled when

the wash programme comes to an end.If you want to deactivate the blockfunction before the end of theprogramme, you have to hold the startbutton down again for at least 3 seconds.After 3 seconds, the block functionindicator will disappear from the display,and it will go into pause status.The ON/OFF button does not cancelthe block function.

BLOCK FUNCTION

a

b

a


18/25

85

When the programme is running you cansee which phase it is at on the display, aswell as how long there is to the end of theprogramme.

The active phases will appear successivelyat the top of the display as the programme

progresses. The time remaining until the endof the programme will also appear on thedisplay. It updates at regular intervals, butnot minute by minute.

Any option button can be selected providedthe wash phase in which it takes effect hasnot been passed and when the programmeaccepts the option.

Pressing the delay button during the washhas no effect on the washing machine.

Pressing the start/pause button during thewash activates the PAUSE function.

7 WASH PROGRAMME PHASESAND POWER CUTS

using the appliance

PROGRAMME

PHASES

Important

All the models have a safety system for spin-dryingthat prevents spin-drying from being carried out ifthe distribution of the clothes inside the drum is tooconcentrated. This prevents the appliance fromvibrating too much.

If you find that the clothes are not properly wrung

out, try spin-drying them again after having distributedthe clothes more evenly in the drum.

If you change the wash programme duringthe wash using the selector, the PAUSEfunction is activated and the programme iscancelled.

If you need to add or remove a garment, pressthe start/pause button and make sure thatthe water level is not above the door overflowlevel and that the temperature inside is not

high. Press the start/pause button again torestart the wash from the same cycle phaseit had stopped at.

If there is a power cut, when the electricitycomes back on the washing machine willcontinue to run from where it left off (it hasseveral hours of memory). The same willhappen if the ON/OFF button is pressed.

warningsLevel the washing machine by adjusting the

feet to reduce the noise caused by spin-drying.

Try and wash clothes of different sizes inthe same wash programme to favour thedistribution of the clothes inside the drumduring spin-drying.

POWER CUTS


19/25

86

washing machinemaintenance and cleaning

a

b

After each wash, leave the door openfor a while to allow the air to circulatefreely inside the machine.

From time to time, depending on thehardness of your water, it isrecommendable to run a full wash cycleusing a decalcifying product. This will

extend the life of your washingmachine.

MAINTENANCE

The washing machine should bedisconnected from the mainselectricity supply before anycleaning or maintenance is carriedout.

Clean the detergent dispenser wheneverthere is any washing product residue leftinside.

a Pull outwards on the detergentdispenser to remove it completely.

b Use warm water and a brush toclean the compartments.

c Also clean the additivecompartment siphons, havingremoved them first. Once theyhave been cleaned, put them backmaking sure that they fit right in tothe back.Put the dispenser back into thewashing machine.

A dirty or incorrectly fitted siphonwill prevent the additives frombeing taken in and leave waterinside the compartment at theend of the wash.Im

portant

Important

1 CLEANING THE DETERGENT DISPENSER

c


20/25

Clean the accessible filter if the drain pumpis blocked by any foreign objects.

a Remove the kickplate by pulling gentlyon its edges and turning it downwards,to release the clips.If you do not have access from the side,insert a small screwdriver into the three

slots at the top of the kickplate, in orderto get leverage and release the clips.

b Place a container under the drain pumpfilter to collect any water that comes outof it.

c Half- or quarter-turn the filter to the left.Water will start to come out.

d When all the water has come out, turnthe filter several times until it can becompletely removed.

e Remove the objects or fluff caught in thefilter or the drain pump.

f Put the filter and kickplate back in placeagain.

87

CLEANING THE ACCESISBLE FILTERAND THE OUTSIDE

maintenance and cleaning

To avoid burns, do not carry out thisoperation when the wash water is ata temperature of over 30C.

When there have been spillages ofdetergent or additives from the

dispenser onto the washing machinecabinet, clean them up right away asthey are corrosive.

2

Important

Impo

rtant

CLEANING THE OUTSIDE

CLEANING THE FILTER

The outside of the washing machine shouldbe cleaned with warm soapy water or a gentle

cleaning agent. Do not use abrasive cleaningproducts or solvents.It should then be thoroughly dried with a softcloth.

c

e

d

a

b


21/25

washing machinesafety and troubleshooting

88

If you detect any problems withyour washing machine, you willprobably be able to rectify themyourself by consulting the followinginstructions.

If this is not the case, unplug theappliance and contact theTECHNICAL ASSISTANCE

SERVICE.

PROBLEMS

Never open up theappliance. There is no fuseor similar component insidethat can be replaced by theuser.

Why wont the washingmachine start?

Why is the washing machinevibrating or making toomuch noise?

This may be due to the following:

The washing machine is not plugged into the mains orthere is no voltage in the mains supply.

The Start/Pause button has not been pressed.

When the washing machine door is not properly closed,F04 appears on the display.

Check that the door has been closed properly.

This may be due to the following:

The blocking and transport screws have not beenremoved.

The washing machine has not been correctly levelled.

Indicator

FO1

FO2

CO3

FO4

FO5.....

F10

Problems

No water coming in

Does not drain or spin-dry

Does not spin-dry

Does not start

Call the Technical Assistance Service

Important


22/25

safety and troubleshooting

89

Why doesnt the washingmachine take in water?

Why doesnt the washingmachine drain or spin-dry?

Why doesnt the washingmachine spin-dry?

Why cant I see any water inthe drum during the wash?

When there is no water coming in F01 will appear onthe display.

Indicator F01, no water coming in, this may be due toa cut in the water supply, a tap turned off or a blockedwater inlet filter.

The possible solutions are as follows: wait for the watersupply to be reconnected, turn on the tap, or remove

the water inlet hose and clean the filter.

When F02 appears on the display.

The reasons for the F02 indicator may be the following:washing machine drain pump blocked, building drainagepipes blocked, or incorrect pump electrical connection.

Solution: if the pump is blocked, gain access to it asdescribed in section 2, maintaining and cleaning theappliance.

When it does not spin-dry, C03 appears on the display.

This may be due to an uneven distribution of clothesin the drum and may cause an excessive level ofvibrations.

The solution is to select a spin-drying programme.

This is due to the fact that the washing machine is providedwith a system which is able to adapt to the load and typeof fabrics, adjusting the levels of water and energy used,in order to preserve the environment.So, although the water level you can see through the hatchmay look low, there is no cause for concern as washingand rinsing efficiency will still be optimum.


23/25

90

safety and troubleshooting

902 10 50 10

Why is there still some waterin the dispenser?

Why cant I open the hatch

immediately after the washhas finished?

Other indications

This may be because the dispenser needs cleaning. Thissimple operation is described in Maintaining and cleaningthe appliance.

1- Cleaning the detergent dispenser.

Washing machines today are provided with safety systems

for users. One of them is that the washing machine cannotbe opened until it is certain that the drum is quite still. Thisis why the hatch cannot be opened for 2 minutes.

The washing machine can detect other indications.When this happens a number of other indicators appearon the display: F05, F06, ...., F10.

This information may be due to very different reasons.

Check if the problem is repeated and in this case callthe AUTHORISED SERVICE CENTRE.


24/25

91

washing machineenvironmental warnings

When your appliance is of no further use, it shouldnot be disposed of together with general domesticwaste.

It can be taken, free of charge, to a specific wastecollection centre, run by your local authority, ordealers who provide this service.

Disposing of waste domestic appliances separatelymeans avoiding possible negative consequencesfor the environment and health, derived fromincorrect disposal. This will enable the materialsin them to be treated and recycled, obtainingimportant savings in energy and resources.

To highlight the obligation of collaborating withselective waste collection, the product is markedwith a symbol to warn against using traditionalcontainers for disposing of the appliance.

For further information, contactyour local authority or the shopwhere you purchased the product.

INFORMATION FOR THE CORRECT DISPOSAL OF WASTE ELECTRICAL ANDELECTRONIC APPLIANCES

eco-note


25/25

Fagor Electrodomsticos, S.Coop.Apartado 49Tel. (943) 71 91 00 / 01Fax (943) 79 68 81B San Andrs, 1820500 MONDRAGN (Guipzcoa)www.fagor.com

e-mail: [email protected]

user guide washing machine

Documents