use r s manualthe cineroid evf (hereafter referred to as evf") is a view nder that can be...

User’s Manual

English

3.5 inch Retina LCD3G (HDMI/HD-SDI input / HD-SDI ouptout)Various Advantage LCD LoupeMulti vendor Battery supportWaveform / Vectorscope / Peaking / SaturationPixel to Pixel / Clip Guide / Crop Guide / OverscanUnderscan / Anamorphic / Monochrome and etc.

Downloaded from www.Manualslib.com manuals search engine

http://www.manualslib.com/

ELECTRONIC VIEW FINDER Cineroid EVF4RVW

Thank you for purchasing the Cineroid EVF.

The Cineroid EVF (hereafter referred to as “EVF") is a view finder that can be mounted on any video camera with a HDMI output signal. Please thoroughly read the user manual for best operation and understanding of all of the functions of the EVF.

Test Before OperatingIt is recommended to test the EVF before operating. Check if the EVF can be turned on once powered, and check if the information/menu is being properly displayed on the LCD.

Copyrights and ProhibitionsThe use of images of people, property, and places can without permission can be prohibited by law. Please refer to your region’s laws regarding copyrights.

02 03

○ Canon and EOS are registered trademarks of Canon.○ Nikon is a registered trademark of Nikon.○ Sony is a registered trademark of Sony.○ Panasonic is a registered trademark of Panasonic.

1. Do not face the eyecup directly into the sun as it may damage the LCD.2. The shadow disk is installed on EVF at factory. This shadow disk can be removed by disassembling eyecup from loupe.

Safety Precautions

21



EnglishELECTRONIC VIEW FINDER Cineroid EVF4RVW

Safety Precautions

◎ Do not use any batteries, power cord, or accessories that are not specified in this

document.

◎ When using a power cord, be sure to plug it in completely. Do not handle power plugs

when your hands are wet. When unplugging the power cord, grasp the plug body

or adapter instead of the cord.

◎ Power cords that are scratched, heavily bent or twisted can potentially be hazardous and

a source of electric shock and/or fire.

◎ Do not insert foreign objects into the product’s electric or cable components.

◎ Do not place the power cord near sources of heat as this may melt or cause damage to

the cord potentially causing fire or electric shock.

◎ Do not disassemble or modify the product. This may damage the product and cause

danger due to a malfunction.

◎ Please keep the product out of reach of young children. Injuries may occur due to damage

to the product.

◎ When using the product in an airplane or hospital setting, it is recommended to acquire

authorization first as signals or electro-magnetic waves from the product may cause other

equipment to malfunction.

◎ Do not store the product in a dusty or humid environment as damage may occur.

◎ When the product is mounted on a camera, do not lift or move the camera by grabbing

the product. This may cause damage to the product or the camera mount.

◎ Do not clean the product with paint thinner, benzene, or other volatile solvents. This may

cause damage to the product and become a fire hazard.

◎ This product is not waterproof. If the product is dropped in water, contact the service

center immediately.

Please observe the following safety precautions as they are meant for the safe and proper use of the product to reduce the risk of accidents. Upon reading the user manual, keep it in a safe and available place.

02 03Downloaded from www.Manualslib.com manuals search engine



04 05

Table of Contents

Safety Precautions

Table of Contents

Components

Parts

Before Using the EVF Openable Optical Loupe Hood for Loupe Separate of Loupe Adjusting the Diopter / Connecting Extention Tube Installing the Battery Connecting External Power Connecting input / output Power On/Off

Basic Features Operating the Menu Adjusting Color Adjusting the Screen Volume Control

03

04

06

07

0808090910101111

12131313




Shooting Features Peaking Pixel to Pixel Clip guide Waveform / Vectorscope False color 1 False color 2 Monochrome Look up table Freeze Over Scaling Underscan Crop Guide Anamorphic Center Marker Time Code Screen Flip

Setting User Controls Custom Button Functions Firmware Upgrade Custom Display Settings Parameter Save And Restore Factory Reset Product Specifications Optional Products

04 05

141515161717

20

20

21

25

18

21

2323

25

1919

2424

18

2222

24




Components

Please ensure all parts are present after opening the box.

06 07

eA. LCD VF + Optiacl Loupe

D. Canon LP-E6 Battery holder

C. Battery holder mount

B. D-tap to mini XLR cabl

E. Cannon BP911 Series Battery holder

F. Sony NPF Battery holder

G. Mini Ball Head H. Extension tube I. User's Manual J. Carrying Bag




Parts

06 07

Diopter Adjuster

Wheel Controller

Hood Latch

Lens

Soft Eyecup

Loupe Latch

Menu Buttons

HDMI input

External power

Power Switch

Mono Speaker

Loupe Flip-up Latch

USB port

Multi Vendor Battery support

HDMI output

HD-SDI output




08 09

Before Using the EVF

Openable Optical Loupe

Hood for Loupe

The optical loupe attached to the EVF body can be flipped open 180 degrees.

The opened Optical Loupe

You can use the LCD hood in the open state by using seperated part from the optical loupe which was attached to the cineroid EVF4RVW.




08 09


Separate of Loupe

Please operate both side of latchs on the optical loupe and remove the optical loupe. The optical loupe attached to the EVF body can be detached completely.

When viewing through the optical loupe, the user can adjust the diopter accordingly. Rotate the dial in either direction until the image becomes clear. and Extention tube is used to extend loupe length for old eye.

Adjusting the Diopter / Connecting Extension tube

Extension tube

1 Touch Removealbe




10 11


Installing the Battery

Connecting External Power

DC in 6~17V

Proper voltage for external power is 6-17V.Attention to the connecting polarities and voltage, otherwise the connectors may be damaged.When both ex ternal power and batter y i s connected, battery is not consumed.

The Cineroid EVF4RVW uses Canon, Nikon and Panasonic's some types of batteries. Each type of battery can be used with battery mount base

and battery holder. The battery or the connectors may be damaged if not aligned properly.

1. Open the battery pin cover 2. Attach the battery mount

Battery holder

Battery

Battery Mount

PA04 (D-tap to mini XLR cable)




10 11


Connecting input / output

Install the battery or connect external power and Turn the power switch to the ON position. If you have an external input, you will see the image displayed from that signal. If there is no external input, you will see the default screen.

Power On / Off

Power ON/OFF switch

2 Serial Digital Inputs the EVF4RVW module has HD-SDIswitchable 3G-SDi input connectors for monitoring.Connect input then select the type of input in menu.

Input : HDMI

Input : HD-SDIOutput : HD-SDI

Control1 Control2 Setting1 Setting2 System Exit

F1-Back / Exit Input Source Set

Input SelectParameter SaveParameter RestoreFirmwareExit

HDMIHDSDITest Pattern

Menu : System - Input Select

Select the type of Input

*How to operate the menu, refer to page 12.




Press wheel button

Scroll wheel button

2

12 13

1

Basic Features

4

5

6

Press F1 button to exit Menu at any position.Tip*

Wheel button

F1 buttonF1

F2

F3

F4

F2 button

F3 button

F4 button


F1-Back / Exit

PeakingPixel to PixelClip GuideWaveformFalse Color 1 False Color 2MonochromeLook up tableFreezeExit


F1-Back / Exit


OnOff


F1-Back / Exit



F1-Back / Exit


OffOffOffOffOffOffOffOffOffOff

Operating the Menu1. Access the setting and features by pressing the wheel button on the left side of the EVF.2. Press the wheel button to select the main menu. When not in the menu, you can adjust the speaker volume by scroll the up and down wheel button.

3. Once the main menu is selected, scroll the up and down wheel button to navigate

through the menu. The cursor is highlighted in red.

4. Move the cursor to the feature you want to select/change and press the wheel button to access that feature. 5. Scroll the up and down wheel to change the value of the feature.6. Move the cursor to Exit and press the wheel button to return to the previous menu.7. To exit the main menu, move the cursor to Exit or press the F1 button.




12 13

Basic Features

Adjusting ColorMenu : Setting2 - Color Adjust

1 2

Adjusting the ScreenMenu : Setting2 - Color Adjust

3 4

Volume ControlMenu : Setting2 - Audio Control

3 4


F1-Back / Exit

Color AdjustScreen Adjustkey AllocationOSDAudio ControlExit

▶

▶

▶

▶

▶


F1-Back / Exit


▶

▶

▶

▶

▶


F1-Back / Exit


▶

▶

▶

▶

▶


F1-Back / Exit Color Adjust Red Gain


▶

▶

▶

▶

▶

Red Gain[1~100]Red Offset[1~100]Green Gain[1~100]Green Offset[1~100]Blue Gain[1~100]Blue Offset[1~100]Exit

474750505050


F1-Back / Exit Screen Adjust Brightness[1~100]


▶

▶

▶

▶

Brightness[1~100]Contrast[1~100]Chroma[1~100]Sharpen[1~100]Exit

45504310


F1-Back / Exit Speaker Mute


▶

▶

▶

▶

▶ Speker MuteVolumeLevel MeterExit

Off3On




14 15

Shooting Features

PeakingOn/Off : Menu - Control1 - Peaking Setting : Menu - Setting1 - Peaking

Peaking Red ONPeaking Red OFF

Peaking On / Off Peaking Setting

To activate the peaking feature, simply press the F1 button on the left side of the EVF body. The peaking will show in the mode that is currently selected.

Simple Peaking Button Tip*


F1-Back / Exit Turn On Peaking


OnOff


F1-Back / Exit

PeakingClip GuideWaveformMonochromeOver ScalingCrop GuideAnamorphicScreen FlipExit

Threshold[1~5] 5Exit

▶

▶

▶

▶

▶

▶

▶

▶

Peaking Sharpness OFF Peaking Sharpness ON




14 15

Shooting Features

Pixel to pixel On/Off : Menu - Control1 - Pixel to Pixel

Pixel to Pixel Off Pixel to Pixel On

Pixel to Pixel Off

Clip GuideOn/Off : Menu - Control1 - Clip Guide Setting : Menu - Setting1 - Clip Guide

Clip Guide Off Clip Guide Color mode Clip Guide Zebra mode

Clip Guide On / Off Clip Guide Setting

Pixel to Pixel On


F1-Back / Exit Set Pixel to Pixel


OnOff


F1-Back / Exit Set Pixel to Pixel


OnOff


F1-Back / Exit Set CLIP GUIDE


OnOff


F1-Back / Exit


ModeZebra RangeHigh Threshold[20~100]Mid Threshold[20~100]Low Threshold[20~100]Exit

Zebra±3%97713

▶

▶

▶

▶

▶

▶

▶

▶




Shooting Features

Waveform / VectorscopeOn/Off : Menu - Control1 - Waveform Setting : Menu - Setting1 - Waveform

Style 1. Only horizontal waveform withimage cropping

Waveform OFF

Style 2. Horizontal and vertical waveformwith small vectorscope

Style 3. Horizontal and vertical waveform with big vectorscope

Waveform On / Off Waveform Setting

To change t h e wave f o rm s t y l e , s imp l y s c r o l l the wheel but ton on the lef t s ide of the cineroid E V F 4 R V W ' s b o d y . T h e w a v e f o r m s t y l e w i l l s how i n t he mode t ha t i s cu r r en t l y se l e c t ed .

Simple change waveform styleTip*


F1-Back / Exit Waveform,Vectorscope Gain[1~30]


Gain[1~30] 20Exit

▶

▶

▶

▶

▶

▶

▶

▶


F1-Back / Exit On or Off Waveform Vectorscope


OnOff




Shooting Features

False Color 1 On/Off : Menu - Control1 - False Color1

False Color1 Off False Color1 On



F1-Back / Exit On or Off False Color 1


OnOff




OnOff

False Color 2 On/Off : Menu - Control1 - False Color 2






OnOff




OnOff




Shooting Features

18 19

Look up tableOn/Off : Menu - Control1 - Look up table

Look up table Off (The image applied adjusting color)

Look up table Off

Look up table On (Original image)


F1-Back / Exit Look up table ON/OFF


OnOff


F1-Back / Exit Look up table ON/OFF


OnOff

Monochrome (B /W, Blue, Red, Green)On/Off : Menu - Control1 - Monochrome Setting : Menu - Setting1 - Monochrome

Monochrome On / Off Monochrome Setting

Monochrome (B/W) Off Monochrome (B/W) On


F1-Back / Exit Color Select


Color B&WExit

▶

▶

▶

▶

▶

▶

▶

▶


F1-Back / Exit On or Off Monochrome


OnOff




18 19

Shooting Features

FreezeOn/Off : Menu - Control1 - Freeze

Freeze Off Freeze On

Freeze Off Freeze On


F1-Back / Exit Screen Feezing


OnOff


F1-Back / Exit Screen Feezing


OnOff

Overscaling Off Overscaling On

Overscaling Setting

Over ScalingOn/Off : Menu - Control2 - Over Scaling Setting : Menu - Setting1 - Over Scaling

Overscaling On / Off


F1-Back / Exit Set Over Scaling

Over ScalingUnder ScanCrop GuideCenter MarkerTime CodeAnamorphicExit

OnOff


480i,p576,p720p1080,pExit

RatioH OffsetV OffsetExit

1,00000

▶

▶

▶

▶

▶

▶

▶

▶

▶

▶

▶

▶

F1-Back / Exit





20 21

Shooting Features

Crop guideOn/Off : Menu - Control2 - Crop Guide Setting : Menu - Setting1 - Crop Guide

Crop guide Off Crop guide On

Crop guide On / Off Crop guide Setting


F1-Back / Exit On or Off Crop Guide


OnOff


RatioCustom Set[1.00~4.00]Guide LineBackground[0~8]Exit

16:91.78Off5

▶

▶

▶

▶

▶

▶

▶

▶

F1-Back / Exit Aspect Ratio


UnderscanOn/Off : Menu - Control2 - Underscan

Underscan Off Underscan On

Underscan Off Underscan On


F1-Back / Exit Set Under Scan


OnOff


F1-Back / Exit Set Under Scan


OnOff




20 21

Shooting Features

Center MarkerOn/Off : Menu - Control2 - Center Marker

Center Marker Off

Center Marker Off Center Marker On

Center Marker On


F1-Back / Exit Set Center Marker


OnOff


F1-Back / Exit Set Center Marker


OnOff

AnamorphicOn/Off : Menu - Control2 - Anamorphic Setting : Menu - Setting1 - Anamorphic

Anamorphic Off Anamorphic On

Anamorphic On / Off Anamorphic Setting


480i,p576,p720p1080i,pExit

RatioOffset 0Exit

1.0000

▶

▶

▶

▶

▶

▶

▶

▶

▶

▶

▶

▶

F1-Back / Exit



F1-Back / Exit On or Off Anamorphic


OnOff




Screen FlipOn/Off : Menu - Setting1 - Screen Flip

Screen Flip On / Off Screen Flip Off

Mirror On Rotate On Rotate On / Mirror On


MirrorRotationExit

OffOff

▶

▶

▶

▶

▶

▶

▶

▶

F1-Back / Exit Set mirror


Time CodeOn/Off : Menu - Control2 - Time Code

Time code Off Time Code On

Time Code On / Off Time Code Setting


F1-Back / Exit Set Time Code


OnOff


F1-Back / Exit Set Time Code


OnOff

22 23

TC 01:22:34




Custom Button FunctionsSetting : Menu - Setting2 - Key Allocation

The left side of the EVF body contains the buttons F1, F2, F3, F4. The factory default for these buttons are peaking (F1), Waveform (F2), False Color 1 (F3), False Color 2 (F4). Each button can be customized to a particular feature by selecting CUSTOM SETUP on the main menu.

Initial functionsSetting key Allocation

Firmware Upgrade

Firmware UpgradeSetting : Menu - System - Firmware

1. Firmware is upgradable by special cable.2. Connect EVF and computer by cable.3. Select On of Firmware Upgrade. The screen is changed to waiting message.4. EVF starts firmware upgrade.

Setting User Controls

F1

F2

F3

F4

PeakingPixel to Pixel

WaveformFalse Color 1


F1-Back / Exit Firmware Upgrade set V01.03


UpgradeCancel


F1-Back / Exit F1 key Allocation


▶

▶

▶

▶

▶

F1F2F3F4Exit

PeakingPixel to PixelWaveformFalse Color 1




Setting User Controls

Custom Display Settings Setting : Menu - Setting1 - Anamorphic You can select to view the current state of the battery usage, volume, etc. on the LCD.

Factory reset1. Powering on the EVF while pressing down the F1 button will reset the EVF to its original default settings.2. Once the reset is complete, fully power off the EVF before powering on for further use.

Parameter save and restoreSetting : Menu - System - Parameter Save/Restore

The all parameters of function can be stored on bank0 or bank1. The parameters can be restored from bank0 or bank1. Factory is the initial parameter of factory.

Parameter Save Parameter Restore

24 25


F1-Back / Exit Parameter Saving

Bank0Bank1



F1-Back / Exit Parameter Restore

Bank0Bank1UserFactory


Peaking ONOSD


F1-Back / Exit OSD Battery


▶

▶

▶

▶

▶

OnOnOnOnLeftOnWhite

BatteryVideo FormatPixel to PixelSpeakerLevel meter PositionFreezeOSD ColorExit

Pixel to Pixel ON




Product Specifications

24 25

Optional Product

O Battery holder

BH-ENEL15

BH-D54SE

Battery holder for

Nikon EN-EL15

Battery holder for

Panasonic D54S

LCD

Audio out

Power

Operating Temperature

Storage Temperature

Power consumption

Weight

Size

HDMIHD-SDIHD-SDI

SizeResolution

ColorViewing angle

Display areaPhone Jack

Internal speakerBattery

External

-10ºC to 60ºC

-20ºC to 70ºC

3.5 W(3 hours with 2200 mA battery)

400 g

102 x 67 x 157 mm

InputInput

Output




Optional Products

(6inch)

(10inch)

FormModel Length Material

Metal

Metal

O Articulating Arm

O Mini Ball Head

Mini ball head MBH-P

Mini ball head MBH-M

Rein force d plastic

Metal

Model Weight MaterialForm

O Soft Eyecup Cover

For Cineroid EVF & Others119 x 86 x 8.5(mm)

ECO : Orange color

ECR : Red color

ECB : Blue color




26 27

Optional Products

O HDMI Cable

HCRF07CRB

Model Length Plug form

HCRB07CRB

HCRF07CRF

HASN07CRF

HASN07CRB

HASN12CRF

HASN12CRB

HASR01CRB 10cm



Customer Support Center

Seculine Co., LTD.Tel +82.70.4347.4901 / Fax +82.2.850.3027Rm.510, Kolon Science Valley #2, Guro-dong, 811, Guro-gu, Seoul, 152-728, KoreaHomepage www.cineroid.com E-mail [email protected]

Printed in KoreaEVF1.0

We will strive to create the best products and provide superb service.



use r s manualthe cineroid evf (hereafter referred to as evf") is a view nder that can be...

Documents