User Manual v1.2

Model: CMMP11USB-C Dual HDMI Docking Station for Windows

Computer equipped with a USB-C connector

It is recommended to always use the USB-C dock with your laptop’s power adapter connected to the USB-C PD charging port. This will provide power to the dock while also providing power to charge your laptop.

Connect the USB-C dock to your laptop by plugging the USB-C male connector into a USB-C port on your laptop.The dock is designed to connect to any laptop regardless of whether the USB-C port is on the left or right of the laptop.

Connect your laptop’s power adapter to the USB-C PD charging port. Supports up to 100W (20V 5A) power pass through.

Connect 1, 2 or 3 monitors to the HDMI or VGA ports. When using a single HDMI monitor, max resolution is 4K Ultra HD 3840 x 2160 @30Hz. When using two HDMI monitors, max resolution is 1920 x 1080 @60Hz. When using one HDMI and one VGA or two HDMI and one VGA, the max resolution is 1920 x 1080 @60Hz.

Windows computers support MST (Multi Stream Transport) allowing you to extend your computer’s desktop to an additional 3 monitors.This USB-C multi-port adapter supports MST and allows you to have one image on your computer and extend to 3 other monitors with 3 different independent images.

Mac OS does not support MST. This adapter will not support dual monitors on Mac OS.

Connect high speed USB devices to the two USB 3.0 ports such as USB flash drives or portable HDDs. The maximum data transfer rate is 5Gbps.

Connect USB devices to the two USB 2.0 ports such as keyboards, mice, USB speakers or printers. The maximum data transfer rate is 480Mbps.

You can also use the two USB 3.0 ports to charge your phone or other USB devices. The maximum power output of each port is 5V 900mA. When both ports are used the maximum power output is 5V 1.5A. To charge a phone or a large external HDD that consumes a large amount of power, the laptop’s power adapter must be connected to the USB-C PD charging port.

MacBook is a trademark of Apple Inc., registeredin the U.S. and other countries.USB-C is a trademark of USB Implementers Forum.

Made in Chinawww.mycomsol.com.au

• 1 x USB-C male connector to connect to computer

• 2 x HDMI female connectors, supports 4K Ultra HD 2160p (3840 x 2160) @30Hz for single monitor

• 1 x VGA female connector, supports 1920 x 1080 @60Hz

• 3 x USB 3.0 type-A female connectors, supports data transfer up to 5Gbps

• 1 x RJ45 female connector for Gigabit LAN

• 1 x SD/Micro SD card reader female ports for data transfer, supports SD/SDHC/SDXC V3.0 UHS-I capacity up to 2TB

• 1 x 3.5mm female audio connector to connect to speakers or headphones

• 1 x USB-C female connector, supports 100W (20V 5A) power pass through

• Supports mirror or extend mode for Windows

• Dimensions: 279 x 78 x 17mm

• Weight: 260g

USB-C to Dual HDMI, VGA, 3 x USB 3.0RJ45, SD/Micro SD, 3.5mm Audio & USB-CConnect a Windows computer equipped with a USB-C port to dual HDMI or VGA display, RJ45 LAN, 3 x USB devices, SD/Micro SD card, 3.5mm audio & 100W USB-C power pass through

Operation

If you are using the USB-C dock to charge your phone, or connect a large external HDD or other USB devices that consume a large amount of power, you must connect your laptop’s power adapter.

If you are experiencing these connection problems, unplug and replug the USB-C dock.

If you laptop’s power adapter is disconnected, all device connections will be lost for a few seconds before reconnecting. During this time, data can be lost. Do not disconnect the power while transferring data to avoid data loss or corruption.

During operation, the USB-C dock may become hot. This is a normal and should not be cause for concern. To minimise heat, please use the dock on a desk or table in a well ventilated area. Avoid using on soft pillows or blankets to avoid blocking the ventilation.

For a stable connection, do not connect multiple devices that consume large amounts of power. The dock will only support one external HDD and charge only one phone.

Trouble Shooting

USB-CPD Charging

2 x HDMI

RJ45 LAN

3 x USB 3.0

VGA

Micro SD Card SD Card

Connect an RJ45 network cable to the RJ45 Gigabit LAN port. This will connect your laptop to a wired network. The green LED indicates connection to a network. The yellow LED indicates network activity.

Insert an SD or Micro SD memory card into the SD/Micro SD slots to transfer data. Both SD and Micro SD cards cannot be used at the same time.

Connect your headphones or speakers to the 3.5mm audio socket and enjoy stereo music directly from your laptop.

3.5mm Audio