usb 2.0 1/4 cmos color board camera with usb 2.0 video output · usb board connector (j1) 22mm...

Videology ® Imaging Solutions, Inc. 37M Lark Industrial Parkway Greenville, Rhode Island 02828 USA Tel: (401) 949 - 5332 Fax: (401) 949 - 5276 Americas, Middle East, Far East & Australia sales: [email protected] www.videologyinc.com Videology ® Imaging Solutions, Europe B.V. Neutronenlaan 4 5405 NH Uden, The Netherlands Tel: +31 (0) 413-256261 Fax: +31 (0) 413-251712 Europe & N. Eurasia sales: [email protected] www.videology.nl 9/18/14 PDS-20B14XUSB Rev D All data subject to change without notice. Electrical 20B14XUSB NTSC 21B14XUSB PAL Image Sensor 1/4” CMOS Resolution (HxV) 640 x 480 (max) Frame Rate 30fps 25fps Sensitivity < 0.05 lux, (50 IRE) F1.2, 3200 0 K, lens transmission 80%, scene reflection 75% Signal to Noise Ratio > 46 dB digital output Gamma 0.45 default Gain Control Automatic 36 dB (AGC default) Scan Mode Interlaced Mirror Mode Selectable via software Synchronization Internal Back Light Compensation Default off White Balance Mode AWB Contour Enhancement Default on Iris Control Electronic Rolling Shutter Shutter Speed Automatic from 1/60 to 1/100,000 Automatic from 1/50 to 1/100,000 Video Outputs USB Control Communication USB Power Supply USB 2 bus Power Consumption < 0.8W Mechanical Dimensions WxHxD 26mm x 22mm x 16mm without lens (1” x 0.87” x 0.63”) Weight 19g (0.67oz) Lens Mounts Example: Change 20B14XUSB to 20B145USB to select an M-12 board mount Replace “X” in model number with desired lens: 2 = Metal M-12 Pinhole 5 = Metal M-12 Board 8 = Metal CS Board Connectors Camera board 30 pin to USB board (J100) MOLEX-501920-3001 USB board 6 pin JST, power & data (J1) Standards RoHS Environmental Operating Temperature -15° C ~ 55° C (5° F ~ 131° F) Storage Temperature -25° C ~ 70° C ( -13° F ~ 158° F) Operating Humidity 20 up to 93% RH Storage Humidity Up to 98% RH Lifetime MTBF > 150,000 hrs Packaging ESD safe package Note: Camera is not USB 1.1 compliant Software Viewer (included) SFT-07019 • WDM device drivers • DirectX/DirectShow compliant • TWAIN compliant (requires driver installation) SDK (optional) SFT-07019-SDK Complete software development kit and support for OEMs Recommended System Requirements Hardware Pentium IV 2.3GHz +, 1GB hard drive, Intel USB 2.0 Host controller Software Windows 7, 8, 10 32 bit and 64 bit Windows Vista 32 bit and 64 bit Windows XP Service pack 2 +, DirectX 9.0c or above Accessories Optional USB 2.0 cable 60C1062 8 ft. (2.4384m) 60C1062-1 40 in. (1.016m) 60C1062-2 12 in. (304.8mm) 60C1062-3 6 in. (152.4mm) 60C1062-4 15 ft. (4.572m) Complementary Models 20/21B14XDIG YUV digital and composite video output 26mm 22mm USB Board Connector (J1) +5VDC Data Negative Data Positive GND Top Rear USB back board Pinouts and Dimensions Product Features • 22mm x 26mm mini-board is compatible with previous 20/21K14XUSB-C family products • All-digital design uses camera board's digital (D1) output for input to USB board • USB 2.0 bus provides power to camera • Complete SDK available Software • USB 2.0 viewer software and Microsoft Digitally Certified WDM Device Drivers for 32bit and 64bit Windows operating systems • DirectX/DirectShow compliant • TWAIN compliant Technical Specifications shown with optional lens USB 2.0 1/4" CMOS Color Board Camera With USB 2.0 Video Output 20B14XUSB/21B14XUSB

Upload: others

Post on 01-Oct-2020

13 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: USB 2.0 1/4 CMOS Color Board Camera With USB 2.0 Video Output · USB Board Connector (J1) 22mm +5VDC Data Negative Data Positive GND Rear USB Top back board Pinouts and Dimensions

www.videologyinc.com

Videology® Imaging Solutions, Europe B.V.Neutronenlaan 4

5405 NH Uden, The NetherlandsTel: +31 (0) 413-256261 Fax: +31 (0) 413-251712

Europe & N. Eurasia sales: [email protected]

9/18/14 PDS-20B14XUSB Rev D All data subject to change without notice.

Electrical20B14XUSB

NTSC21B14XUSB

PALImage Sensor 1/4” CMOSResolution (HxV) 640 x 480 (max)Frame Rate 30fps 25fpsSensitivity < 0.05 lux, (50 IRE) F1.2, 32000K,

lens transmission 80%, scene refl ection 75%Signal to Noise Ratio > 46 dB digital outputGamma 0.45 defaultGain Control Automatic 36 dB (AGC default)Scan Mode InterlacedMirror Mode Selectable via softwareSynchronization InternalBack Light Compensation Default offWhite Balance Mode AWBContour Enhancement Default onIris Control Electronic Rolling ShutterShutter Speed Automatic from 1/60 to

1/100,000Automatic from 1/50 to

1/100,000Video Outputs USBControl Communication USBPower Supply USB 2 busPower Consumption < 0.8W

MechanicalDimensions WxHxD 26mm x 22mm x 16mm without lens

(1” x 0.87” x 0.63”)Weight 19g (0.67oz)Lens MountsExample:Change 20B14XUSB to 20B145USB to select an M-12 board mount

Replace “X” in model number with desired lens:2 = Metal

M-12 Pinhole5 = Metal

M-12 Board8 = MetalCS Board

Connectors Camera board 30 pin to USB board (J100)MOLEX-501920-3001

USB board 6 pin JST, power & data (J1)

StandardsRoHS

EnvironmentalOperating Temperature -15° C ~ 55° C (5° F ~ 131° F)Storage Temperature -25° C ~ 70° C ( -13° F ~ 158° F)Operating Humidity 20 up to 93% RHStorage Humidity Up to 98% RHLifetime MTBF > 150,000 hrsPackaging ESD safe package

Note: Camera is not USB 1.1 compliantSoftwareViewer (included)SFT-07019

• WDM device drivers• DirectX/DirectShow compliant• TWAIN compliant (requires driver installation)

SDK (optional)SFT-07019-SDK

Complete software development kit and support for OEMs

Recommended System RequirementsHardware Pentium IV 2.3GHz +, 1GB hard drive,

Intel USB 2.0 Host controllerSoftware Windows 7, 8, 10 32 bit and 64 bit

Windows Vista 32 bit and 64 bitWindows XP Service pack 2 +,

DirectX 9.0c or above

AccessoriesOptional USB 2.0 cable 60C1062 8 ft. (2.4384m)

60C1062-1 40 in. (1.016m)60C1062-2 12 in. (304.8mm)60C1062-3 6 in. (152.4mm)60C1062-4 15 ft. (4.572m)

Complementary Models20/21B14XDIG YUV digital and composite video output

26mm