us$, ex works mechanical & electronic tank truck flow meters

Tuthill Transfer Systems, Phn: 985-542-5200 Fax : 985-542-7394 P.O.Box 400, 888-578-3258 E-mail: [email protected] Tickfaw, LA 70466, USA

Europe, Middle East & Africa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +44 (1858) 462-888 +44 (1858) 462-432 Asia & Pacific, incl. Korea, Japan & Taiwan . . . . . . . . . . . . . . . . . +61 (3) 9720 6533 +61 (3) 9720 6880 China . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +86 (21) 5385-3369 +86 (21) 5385-3365 Mexico Monterrey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +52 (81) 8355-5535 +52 (81) 8355-5534 Mexico City . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +52 (5) 363-4346 +52 (5) 363-4189 Caribbean, Central America & Northern South America . . . . . . . +57 (1) 624-7010 +57 (1) 533-0802 Brazil, Argentina, Chile, Paraguay, Uruguay & Bolivia . . . . . . . . +54 (11) 4866-5641 +54 (11) 4866-5641

W W W . T U T H I L L . C O M

ISO 9001:2000 Certified

Price List FPP140$ US$, Ex Works

January 1, 2009 Mechanical & Electronic Tank Truck Flow Meters

• Refined Fuels • LPG • Chemical Transports

FPP140$ effective January 1, 2009, US$, Ex Works, Tickfaw, LA, USA

- 2 -

This price list covers the most common configurations of Flow Meters for Tank Truck service, both on refined petroleum products, LPG & chemical transports. For other configurations & appli-cations, please consult with your area manager or Customer Care.

Electronic by Tuthill are designed to communicate directly with electronic registers, without the need for an external pulser. The flow meter is gland-less, with a high resolution pulse signal wired directly to the electronic register. With the new Wave Form pulser (introduced in 2007), the flow meter can be serviced without removing the register.

While electronic can be used with all the major electronic register systems, the meter is available from TTS only with the EMR3 register system from Veeder-Root. When ordering flow meters for use with other electronic registers, to ensure that the pulse signal is compatible, please indicate which register make & model. When ordering flow meters with the EMR³ register, the register is pre-programmed if you specify unit of calibration and decimal point in the purchase order.

INDEX Product selection based on Service Conditions . . . . . . . . . . . Page 3 Introduction to FPP Tank Truck flow meters . . . . . . . . . . . . . . Page 4 FPP Electronic Flow Meters with EMR³ register . . . . . . . . . . . Page 5 FPP Electronic Flow Meters with other electronic registers 3

US config. Canada config. TS Series, Part & Assy. Nos. for mechanical meters Page 6 same Part & Assy. Nos. for electronic meters Page 7 Page 19 Price pages TS15A 1½” Mechanical Page 8 same Electronic Page 9 Page 20 TS20A 2” Mechanical Page 10 same Electronic Page 11 Page 21 TS30A 3” Mechanical Page 12 same Electronic Page 13 Page 22 LPG Meters Electronic Page 14 SS Meters Mechanical Page 15 same Electronic Page 16 Page 23 Lube Truck Meters, Mechanical & Electronic . . . . . . . . . . . . Page 17 EMR³ register options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 18 SCL scalers for use with other electronic registers . . . . . . . . . Page 24 Terms, Conditions, Testing & Field Service . . . . . . . . . . . . . . . Page 25 Manuals, Standard Assembly/Configuration . . . . . . . . . . . . . . Page 26 Application Information & Warranty Statement . . . . . . . . . . . . Page 26

LEAD TIME is indicated with symbols by each item:

▲ = Products covered by this price list are generally available in 2-4 weeks Ex Works, from date of order with complete specifications. Orders for 10+ units might be subject to slightly longer lead times (please inquire). ● = Meters with LV rotors, Viton seals & basic register are available under our ‘Quick Ship’ program. This program targets opportunities, where immediate delivery is key. Limited to 1-2 units; when requested and agreed to: Flow Meters without preset or solenoid valve Ship in 1-2 days Flow Meters with mechanical preset valve Ship in 3-5 days Solenoid valves with different voltages, electrical classifications and UL/ATEX certifications are not included.

■ = Requires components purchased or machined to order. Usually 6-10 weeks (ATEX valves range to 16-18 weeks).

CONTACTS Customer Care, Order Entry & Applications Phone : 985-542-5200 (US: 888-578-3258) Fax : 985-542-7394

Louis LeBlanc 985-542-5200 x 4228 E-mail : [email protected]

Keven Theriot 985-542-5200 x 4225 [email protected]

- 3 -

FPP Meters by Tuthill Transfer Systems are designed for use on a broad range of liquids. Meters for refined petroleum products are 100% non-ferrous, so they may be used on aviation fuels as well as standard motor fuels, Biodiesel, glycols and other auto-motive fluids. Current production offers a choice of 4 model sizes in two materials:

4 model sizes: Nominal Capacity* on Gasoline/Diesel TS??A TS??C TS10 40 GPM 150 lpm 9 m³/h Case : Anod. Aluminum 316SS TS15 60 GPM 230 lpm 14 m³/h Shafts : HC303SS HC316SS TS20 150 GPM 570 lpm 34 m³/h Rotors : PPS/carbon PPS/carbon TS30 Mechanical 200 GPM 760 lpm 45 m³/h Seals : Viton™ standard Teflon™ standard Electronic 250 GPM 1000 lpm 60 m³/h Teflon™ optional

• Nominal capacity = maximum flow rate in continuous duty service on low viscosity liquid at normal ambient temperature.

• Optimum performance is in 50-85% range of nominal capacity.

• 85-110% operation increases the maintenance requirements.

• On high viscosity liquids, such as heavy fuel oil & automotive lubricants, the capacity is reduced per chart shown below. Flow meters are assembled with different rotors and/or seals for various operating conditions. Standard, and the three most com-mon variations, are identified with color coding in the price pages:

• Meters with HV rotors work fine on lower viscosity liquids, down to 5-10 cSt (1500 SSU). • Do not use mechanical preset valve on liquids with viscosity exceeding 1000 cSt (4700 SSU). • For use with the EMR³ register/preset, a ball or butterfly valve with 2-stage pneumatic actuator & ‘Fail-Safe’ option is

usually the best choice. • Flow meter coefficient

(capacity correction factor) for service on automotive lube oils:

0°F 15°F 30°F 45°F 60°F 80°F Minimum Liquid-17.8°C -9.4°C -1.1°C 7.2°C 15.6°C 26.7°C Temperature

SAE10 & SAE20 0.49 0.70 0.95 1.00 1.00 1.00SAE30 & SAE40 0.23 0.41 0.60 0.85 1.00 1.00

SAE50 0.17 0.30 0.48 0.66 0.90 1.00

Correction factors to model nominal capacity

• Do not use on perchlorethylene (dry cleaning solvent). That service requires SS meters. • Do NOT operate at flow rates higher than nominal capacity. • For use with the EMR³ register/preset, a Teflon fitted butterfly valve with 2-stage pneumatic actuator & ‘Fail-Safe’

option is usually the best choice.

Standard: Aviation Fuels, Bio-Diesel, Diesel Fuel, Fuel Oil Nos. 2-4, Gasoline without alcohol, Glycols & Kerosene = Low/Medium viscosity refined petroleum products at ambient temperatures < 120°F (= 50°C). Viscosity not to exceed 300 cSt (1500 SSU), which is equivalent to SAE30 at +73°F (= 23°C).

• Viton seals are rated for service to -20°F (= -29°C). • Processor in the EMR register operates correctly down to -40°F (= -40°C), but the display lags behind at tem-

peratures below -13°F (= -25°C). Maximum operating temperature is +158°F (= +70°C). • Intermittent service (= < 6 hours/day) slightly above nominal capacity is usually acceptable (please consult). • In mechanical preset valves used on liquid with 50+ cSt (200 SSU) viscosity, remove set screw from the piston. • FPP solenoid valves are restricted to maximum 150-175 cSt (800 SSU) viscosity.

High Temperature : Fuel Oils & Automotive Lubricants heated to temperatures above 120°F (= 50°C), HT rotors are used Viscosity not to exceed 300 cSt (1500 SSU), which is equivalent to SAE30 at +73°F (= 23°C).

• Maximum operating temperature for: Mechanical register/preset/printer is +176°F (= +80°C). EMR³ Register is +158°F (= +70°C).

• Pulser ATEX listing is to +140°F (= +60°C). Design rating is to +257°F (= +125°C) for use with remote register. • Intermittent service (= < 6 hours/day) slightly above nominal capacity is usually acceptable (please consult). • In mechanical preset valves used on liquid with 50+ cSt (200 SSU) viscosity, remove set screw from the piston. • FPP solenoid valves are restricted to maximum 150-175 cSt (800 SSU) viscosity.

High Viscosity : Heavy Fuel Oils & Automotive Lubricants, when viscosity can exceed 300 cSt (1500 SSU). HV rotors are used Meter capacity is reduced when viscosity exceeds 1000 cSt (4,700 SSU). Also see below.

Alcohol & Solvents : E85, Gasohol, Ethanol, Methanol & standard solvents (but NOT halogenated solvents). Teflon seals Low viscosity non-lubricating liquids, meters have standard rotors & bearings, but Teflon™ seals.

- 4 -

Tank Truck Meters - Air Elimination & Accessory Packages

Model TS20AV17AT complete with Mechanical register Mechanical printer (zero start) Mechanical 2-stage preset/linkage/valve Standard strainer with Air Eliminator and 40 mesh strainer basket (20, 80 & 100 mesh optional). • For use on tank trucks, a backpressure valve be-

tween the strainer and the flow meter is recommended to enhance air eliminator efficiency. Specify as a separate item:

• TS10A, TS15A & TS30A: VP1901 • TS30A . . . . . . . . . . . . . : VP1930

• For use on a tank truck subject to ‘Split Compartment’

testing and on diesel fuel, a High Capacity strainer is required when:

2” system: Flow > 70 GPM (265 lpm) 3” system: Flow > 140 GPM (530 lpm)

To include the high capacity strainer, extend the P/No.: • TS20AV13_ _CBMXA202

• TS30AV●●_ _CBMXA203 • An Air Check Valve to stop flow while the air elimi-

nator vents is used where the backpressure valve is inadequate. When added on flow meter outlet, the backpressure valve is no longer required (flow meter Assembly No. changes in mechanical assemblies).

• The air check valve is generally required in systems, where large volumes of air are encountered. This applies to all systems, where tanks are pumped dry.

• When selected, the distributor must install piping, tubing or hose between one port on the air elimina-tor, and the port on the air check valve.

• If added to an existing flow meter in the field, two plugs (one blind & one with a limited bleed opening) must be installed in the air eliminator.

LPG Service In LPG service (electronic register only), the flow meter includes: • Check valve on strainer inlet (except TS30A model).

• A pressure relief valve on the vapor eliminator.

• A differential check valve on flow meter outlet.

TS20AE93A with the EMR³ electronic register is shown here. This meter can also be used with other electronic registers, such as LCR-II, MID:COM, Pegasus, AccuLoad & other makes.

- 5 -

Flow Meters for Refined Petroleum Products - EMR3 Electronic Register &

The EMR3 register has two main components, the register head and a remote Interconnect Box (IB). There is some sharing of components in multi-meter systems since each IB can control 2 registers.

Standard with optional keypad kit

The EMR3 register is available in 4 basic versions:

• Volume & Flow Rate • With Temperature/Volume Compensation • With Currency function • With Temperature/Volume Comp. & Currency function

All 4 versions come standard with preset function. To utilize this function, a 2-stage solenoid valve (& solenoid protection kits) must be included in the system.

Standard solenoid valves are sensitive to liquid viscosity, and are not suitable if the viscosity can exceed 175 cSt (≈ 800 SSU). This viscosity level is equivalent to 10W30 at 60ºF (15ºC) or SAE40 at 100ºF (38ºC).

We offer two types of solenoid valves for preset function:

• 90º piston valve for low viscosity liquids, in 1½” through 3” sizes for light to medium duty service (in truck systems & smaller loading racks). These valves bolt directly to the flow meter outlet.

• For high viscosity liquids (> 150-175 cSt = 800 SSU), we offer a ball valve with a 2-stage pneumatic actuator and Fail-Safe (spring loaded). These valves require a nipple or a flange adaptor to install on the flow meter.

We recommend that this type of valves be sourced locally, to ensure prompt after sales support & future parts supply.

Special shielded & armored cable, with UV & oil resistant cover, is used between the register head and the IB. A com-bination data & power cable is used between the IB and the printer. All other cables must be supplied locally; this includes:

• From IB relays to solenoid valve • From IB to local PC

The EMR³ register system can be used on retail tank trucks, aviation fuelers and in other service, where one or more of these functions are required:

• Electronic transaction data collection • Temperature/Volume Compensation • Price calculation at time of delivery • Multi-point calibration • Calibration for multiple products

The EMR register is available with DataLink, a wireless com-munications system, which automatically uploads transaction data whenever the vehicle is within line of sight with the home base (abt. 4.5 miles or 7 km).

If fleet owner has adopted DataLink for automatic upload of transaction details, add (for each Interconnect Box):

846000-031 Transmitter for register with key pad

or 846000-032 Transmitter for register without key pad

This price list covers common meter/register/accessory pack-ages for use on tank trucks. Other combinations are possible; if you cannot locate what you need in this price list, please consult with Customer Care or your Area Manager.

Operating Temperature Both minimum and maximum operating temperature vary with the register model selected:

Flow Meter: Mechanical -40°F to +176°F (-40°C to +80°C)

Electronic design: -40°F to +257°F (-40°C to +125°C) UL/ATEX: -4°F to +140°F (-20°C to +60°C)

Meter Register: 7887 mechanical** -40°F to +158°F (-40°C to +70°C)

EMR³ electronic -13°F to +158°F (-25°C to +70°C)

** with air barrier in flow meter assembly, use up to +176°F (80°C) is allowed.

US vs Canadian Type Veeder-Root manufactures the EMR³ register in two types:

1. With input drive shaft and internal pulser in the register.

2. Accepting direct pulse input from the flow meter.

At the present time (January 2009), the Canadian Office of Metrology has approved both versions of the EMR³ register. However, they have not yet approved the new Tuthill pulser design (= Wave Form pulser). Thus, while Type 2 is approved in the US, only type 1 (based on a mechanical flow meter) is approved in Canada.

We have priced both versions in this price list. Since the Ca-nadian ‘package’ is temporary, we will not issue dedicated Part Nos. to cover this assembly. While this price list shows a sin-gle package price, order confirmations will consist of 4-12 sub-assemblies.

- 6 -

P/No. structure for Mechanical & Electronic Flow Meter Assemblies

Mechanical Tank Truck Meter AssembliesThe P/No. consists of 3 segments:

Units allowed or possible vary with model size

P o s. in P / N o .

The P/No. is completed only as far as necessary.

With standard strainer & internals = 10 positions.

=Viton™Teflon™

2" High Cap203

16

Seals:

3" High Cap

flanges: B = with BSP ports

A =B

0M ?Variables

C ? X ? 2?1817

Unit of Calibration: Please see price pagesBC =

Companion A

14

HT (high temperature) rotorsI =L =

HV (high viscosity) rotors

=

Defines Register and Accessory selections, please see below.

Strainer: 202

=

LV (low viscosity) rotors

11 12

with NPT ports

Internals:

13 155 6 71 2 3 4 8 9 10

V 1 3 ?

other

==

Model No. Assy. No.

T S 2 0 A

AC

= Anodized Aluminum= 316 Stainless Steel

Register comp.

included

Register stack definitions:

Mechanical meter assy.:Flow Meter with Strainer/Air Eliminator

+ Preset ValveAir Chk Vlv

Air Chk Vlv

Flow MeterAssembly Number (pos. 6-8 in P/No.)

+ Preset Valve

7887, 7888 & 7889

V307887 & 7889

V34V17nana na

na V13

nana

V23none V247887

7887 & 7888 na

V22naV25V06

V09 V26

Same + Ticket Printer,

CAL

VR1

VR2

VR3

VR4

Calibrator, RAD adaptor, Ratio Gear Plate, 2-stg Preset Counter & Register

Same + Ticket Printer,

With calibrator & RAD adaptor for register, but no ratio gear plate/register

With Calibrator, RAD Adaptor, Ratio Gear Plate & Register

V15

V04V07nana

nana

V11

V20V03 V18

Notice: The Part No. and Assy. No. structure is designed to describe the complete flow meter assembly. This does not mean that every theoretical combination of components is available. For example, neither the air check valve nor the high capacity strainer is manufactured in stainless steel at this time. This price list covers the most commonly required flow meter assemblies for tank truck service. Some less common options or accessories exist, or might be available from our suppliers. If you do not find what you are looking for in this price list, please contact your Area Manager or Cus-tomer Care for assistance.

- 7 -

Flow Meters for Refined Petroleum Products — EMR3 Electronic Register

0 w ith EL0304 TBB

S other (specify scaler separatel

F44

+ Air Eliminator

F43

Flow Meter, Strainer & TW

1

Electronic Register & Interconnect Box

331791-001

Prices for Meter/Register include a 35' cab le kit (846000-106), shown as a separate item in orders.

TM-U295-071

F47

845893-21? F46846000-0022

If an Air Check Valve and/or a Solenoid Valve is required with these meter assemblies, the valve(s) must be ordered separately.

845893-21?331791-001

846000-002845893-21?

TM-U295-071

F42

F45

none

Position 11 in the P/No

F34Register only (2nd f low meter in 2 meter system)

84569?-401

F31none F41

F49

84569?-401 845893-21?

F36

F39

84569?-402 846000-002

84569?-402

84569?-402

84569?-401

F37

F33

- + opt. Currency function

F4884569?-403

etc Add 20 to Assy. No. Add 20 to Assy. No.84569?-404

etc

2Electronic Register, Interconnect Box & Printer w ith pow er/data cable

Electronic meter assy.: EMR³ Register,

Rate & Volume

Electronic Register included

Flow Meter

+ Strainer & Air Eliminator

Assembly Number (pos. 6-8 in P/No.)

Electronic Register includedRegister definitions:

EMR³ Register, Rate, Volume & Temp Comp

Meter w TW

=B =E =

The P/No. is completed only as far as necessary (min. 9 positions).

X is used as a filler, when other options do not apply.

2 0 ? ?Model No.

T S F 3

Standard

blank or X =

BSP, if solenoid valve is addedwelding, ANSI, DIN, etc.

BSP companion flange

Internals:

with EL0304 (Register Ready for EMR3 or MID:COM)C =

F4? =

EMR3 register only (2nd meter in 2 meter system)=1

A =Flange Kit included:

NPT companion flangeD

P o s. in P / N o .

panel:

EMR3

certification:

Assy. No. Variables

NPT, if solenoid valve is added

A

With Temp Comp EMR3

= Anodized Aluminum

76

LV rotors/Viton sealsHT rotors/Viton seals

LV rotors/Teflon seals

ATEXU

Spanish

3 =

French

2 = EMR3 register & Interconnect box

UL & cULA =

Standard

front

B==

HV rotors/Viton sealsT =

S

E =

2" High Capacity strainer3" High Capacity strainer3-way solenoid valve kit (LPG service)

English Standard

= 316 Stainless Steel

2 =

=S

A

14

F3? =

1 52 3 4

C

V

=

S =F =

0 =with EL0300-1-13_ (Register Ready for LCR-II™)=

Electronic Tank Truck Meter AssembliesThe P/No. consists of 3 segments:

TS20AF36A => Standard Internals English front panel UL/cUL Interconnect Box

6 ??13108

With non-comp EMR3 EMR3

9

? ?11 12

Defines Register & Accessories.

- 8 -


Flow Meter withStrainer, Air Eliminator andother components as selected

= Standard meter

1 2 3 4 5 11 12 13 14 15 16 17 18

T S 1 5 A ● ● ● ● ● ●T S 1 5 A CLM ▲ ▲ ▲ ▲ ▲ ▲T S 1 5 A C I M ▲ ▲ ▲ ▲ ▲ ▲T S 1 5 A CBMX B ▲ ▲ ▲ ▲ ▲ ▲

1 2 3 4 5 11 12 13 14 15 16 17 18

T S 1 5 A ● ● ● ● ● ●T S 1 5 A CLM ▲ ▲ ▲ ▲ ▲ ▲T S 1 5 A C I M ▲ ▲ ▲ ▲ ▲ ▲T S 1 5 A CBMX B ▲ ▲ ▲ ▲ ▲ ▲

Pos. 9 in P /No. L = Whole liter calibration

Pos. 10 in P /No. B = BSP companion flanges

Left to RightUnless otherwise specified, Strainer with front inlet & 40 mesh basket (20 mesh w hen meter has HV rotors)applies to both mechanical Single valve with front outlet; with both preset & air check valves, ACV outlet to the right.& electronic versions. Ticket printer is Zero Start type.

FLANGES limited to 1000 cSt!

without preset valve limited to 1000 cSt!

$3,348$3,694

$5,303$5,303$5,493$5,839

Subject to change without notice.

Aviation Fuel, Bio-Diesel, Diesel Fuel, Light Fuel Oil, Gasoline, Glycols & Kerosene.LN C / GP

CALIBRATION without preset valve

$4,483

$6,062$3,277 $3,877 $4,697 $3,917

$2,751 $3,351 $4,171

with Air Check Valve

$4,689 $5,509$2,751

$3,364

with Mechanical Valve/Linkage

LNC, Preset & Printer

$4,483$4,673$5,019

$3,158$3,158

$3,335$3,654

$3,965$3,965$4,155$4,474

$3,145$3,145$2,545

P R ESET A C V substH V ro to rsLIN K/ VLV

Register & Printer

Register (LNC)

with Back Pressure Valvewith Mechanical Valve/Linkage

without register

Companion flanges:

Unit of Calibration:

9

? =>

? =>

$2,54510

? ?8

?? $2,735

$3,054

?8

●6 7

●

?

? ?

?● ? ?●

Flow Meter Assembly:

● ? ??

?

● ?●

base/ B P V P R IN T ER

●

V20& VP1901 & VP1901 & VP1901 & VP19016 7

V22 V06 V09& VP1901 & VP1901

without LNC & Preset

V17

Register & Preset


V13

PPS/carbon rotors & Viton sealsAnodized Aluminum, Mechanical

TS15AV06AT

1½" TS15ATank Truck service60 GPM = 230 lpm

W&M certified in the US & Canada150 PSI = 10 BAR

without register

Register (LNC)

Register & Printer


$4,171$3,351

Please consult for other flange types

A = NPT companion flanges

$3,554 $4,879$5,242

T = 1/10 gallon calibration

$3,541 $4,361$2,941 $5,699

$3,364 $4,689 $5,509V34V24 V309 10

E85, other alcohols & solvents. With optional Teflon seals. Not for use on halogenated solve Liquid and operating conditions determine flow meter internals

High viscosity fuel & lube oils, viscosity > 300 cSt. HV rotors (& 20 mesh strainer baskeHeated oils, 120-180°F (50-80°C), Viscosity < 300 cSt. With HT rotors.

Register & Preset

V23 V25 V26

- 9 -


= standard meter

& & & & &

1 2 3 4 5 15 16 17 18

T S 1 5 A ● ● ● ▲ ▲T S 1 5 A ▲ ▲ ▲T S 1 5 A ▲ ▲ ▲T S 1 5 A ▲ ▲ ▲

& & & & &

1 2 3 4 5 15 16 17 18

T S 1 5 A ● ● ● ▲ ▲T S 1 5 A ▲ ▲ ▲T S 1 5 A ▲ ▲ ▲T S 1 5 A ▲ ▲ ▲

with solenoid/air check valve: D for NPT or E for BSPOption: VP2250-1 Air Check Valve in place of VP1901 back pressure Valve ADD: ●

VP2257-1 Air Check Valve/Teflon in place of VP1901 back pressure valve ADD: ●

Subject to change w ithout notice.

2 = Register & IB, 1 = Register only, deduct $969 & 0 = neither, with EL0304 S = neither, with EL0300-1-13C for use with LCR-II register. Add:

● $223● ●

$135 ▲Companion Flanges

●

●

● B2

10

●

9

??

?

EMR3/MID:COM

U

$3,034

$2,894

13

See page 18 for DataLink wireless communications and other register & valve options.

$6,016 $6,922

$5,876

$5,697

VP1901

No solenoid valve

846000-106

Limited to 50 cSt (250 SSU). Pls consult with application details

for HV & Teflon fitted valves?$2,715$2,52540 mesh

VP1901846000-106

VP1901 VP1901 VP1901


for HV & Teflon fitted valves

40 mesh20 mesh100 mesh

$5,367$4,461$2,575 $4,651$2,385$2,385

11

1411 12

2 U2 U●

6 7

●●

Same, with Thermo Well in Strainer basket cover

8

●●

F33/Vit F33/Tf l

?

Sol Vlv 900

With EMR3 Register = 84569?-401 & 845893-21?Strainer (40 , 20 o r 100 mesh ) with Air Eliminator & VP1901 Back Pressure Valve; optional Solenoid Valve to utilize Preset function

Register readyEMR3/MID:COM

Aviation Fuel, Bio-Diesel, Diesel Fuel, Light Fuel Oil, Gasoline, Glycols & Kerosene.

Non-Compensated

Tank Truck service 60 GPM = 230 lpmW&M certified in the US

Canadian approval is pending

Internals vary with liquid, temp & visc.

No solenoid valve

Register ready

846000-106

F46

$5,557$4,970

Temperature/Volume Compensated

+ 12V 2-stg X-prf sol valve, UL/cUL

846000-106

$5,507 $6,413$6,413$5,507

F49+ Printer


$7,313

+ Printer

84569?-402, 846000-002 & 845893-21?

$5,367

2 U 40 or 100

EMR3:

U 40 or 100 $4,461?

TV

??

TV

X

B

X

U = UL/cUL listed, substitute A for ATEX version

$206

F49

$6,603

$6,407VS22237PVS22237P

without solenoid/air check valve: A for NPT or B for BSP

846000-106

F36VP1901

136 7 8

F33VP1901

9 10846000-106

VP1901

VS22237P846000-106

VP1901

14

TS15A

E85, gasohol, alcohols & solvents (not for perchlorethylene ). With Teflon™ seals in lieu of Viton

150 PSI = 10 BAR

212

EMR3 20762266

1½"

High viscosity fuel & lube oils, viscosity > 300 cSt. With High Viscosity rotors (& 20 mesh strainer basHeated oils, 120-180°F (50-80°C), Viscosity < 300 cSt. With HT rotors.

Canadian approval is pending acceptance of flow meter internal pulser

Anodized Aluminum, Wave FormPPS/carbon rotors & Viton seals, ±1013 PPG

2

EM R3 cover blank or E for English front panel, insert S for Spanish or F for French

U

F43

$2,5252

20 mesh100 mesh

F46

HV 190

2775 PRINTER 906TVC 752

F39

TW 140VP19 119 H C STR 265

F39

$6,267

+ Printer + PrinterF36

$5,361

VP1901846000-106

VS22237P

EM R3 listing

U

● ● ● EMR3 & IB

2U

- 10 -


Flow Meter with TS20AV25ALStrainer, Air Eliminator andother components as selected

= Standard meter

1 2 3 4 5 11 12 13 14 15 16 17 18

T S 2 0 A ● ● ● ● ● ●T S 2 0 A CL M ▲ ▲ ▲ ▲ ▲ ▲T S 2 0 A C I M ▲ ▲ ▲ ▲ ▲ ▲T S 2 0 A CBMX B ▲ ▲ ▲ ▲ ▲ ▲T S 2 0 A CBMX A2 0 2T S 2 0 A CL MX A2 0 2T S 2 0 A C I MX A2 0 2T S 2 0 A CBMX B2 0 2

1 2 3 4 5 11 12 13 14 15 16 17 18


Pos. 9 in P/No. L = Whole liter calibration



W&M capacity varies by country

▲$265add

2" Anodized Aluminum, Mechanical TS20APPS/carbon rotors & Viton seals

$6,311$3,184

? => A = NPT companion flanges

$3,797 $5,122$5,491

$3,784 $4,604

V30 V34$4,414 $3,607

V2310

$4,932 $5,752

& VP1901 & VP1901

Register & Preset


Register & Printer


without preset valve limited to 1000 cSt!

CALIBRATION without preset valve with Mechanical Valve/LinkageFLANGES limited to 1000 cSt!

150 GPM = 570 lpm

A C V subst

Heated oils, 120-180°F (50-80°C), Viscosity < 300 cSt. With HT rotors.Aviation Fuel, Bio-Diesel, Diesel Fuel, Light Fuel Oil, Gasoline, Glycols & Kerosene.

LN C / GP

150 PSI = 10 BAR Tank Truck service

E85, other alcohols & solvents. With optional Teflon seals. Not for use on halogenated solve

H V ro to rs

Liquid and operating conditions determine flow meter internals

High viscosity fuel & lube oils, viscosity > 300 cSt. HV rotors (& 20 mesh strainer baske

base/ B P V P R IN T ER LIN K/ VLV P R ESET

& VP190110

Register & Preset

w ithout register

V22 V06 V09

Register & Printer

● ? ?

8 9

●6

?

?

?

??


? ?● ? ?●

?

?

?

?

? ?

????

V248 9

● ? ?●

?

● ?

?●

●???

● ?●

●

? =>

$2,788$2,978$3,303

T = 1/10 gallon calibration

V25 V26

If subject to 'Split Compartment' testing , on diesel fuel and higher viscosity liquids at 70+ GPM (265+ lpm), use 2" High Capacity strainer/air eliminator.

w ithout register

Register (LNC)

●

6 7

●

Register (LNC)

with Back Pressure Valve


& VP1901

$3,388$3,578

$4,208$4,208

$4,723

$3,401

7

? ?

$3,903

$2,788 $3,388& VP1901 & VP1901

Companion flanges:


●●

$4,398

V20



V13 V17

$3,401

$3,591$3,943

$5,942

$4,726$4,726$4,916$5,268

$5,546$5,546$5,736$6,088


$4,932 $5,752$2,994 $3,594$2,994 $3,594 $4,414 $3,607


add $265

$3,526 $4,126 $4,946 $4,166


▲


- 11 -


= standard meter

& & & & &

1 2 3 4 5 15 16 17 18

T S 2 0 A ● ● ● ▲ ▲T S 2 0 A ▲ ▲ ▲T S 2 0 A ▲ ▲ ▲T S 2 0 A ▲ ▲ ▲T S 2 0 AT S 2 0 A ▲T S 2 0 A

& & & & &

1 2 3 4 5 15 16 17 18


with solenoid/air check valve: D for NPT or E for BSPOption: VP2250-1 Air Check Valve in place of VP1901 back pressure Valve ADD: ●

VP2257-1 Air Check Valve/Teflon in place of VP1901 back pressure valve ADD: ●


ADD:

$7,017

● ● ● ●

EM R3 cover

EM R3 listing

2 = Register & IB, 1 = Register only (deduct $969) & 0 = neither, with EL0304 U = UL/cUL listed, substitute A for ATEX version

$265

40 or 10040 mesh20 mesh100 mesh


Companion Flanges without solenoid/air check valve: A for NPT or B for BSP

$206●

$135 ▲

●

S = neither, with EL0300-1-13E for use with LCR-II register. Add:

100 mesh

EMR3 & IB

T?

U

V

T

2

2 U

40 or 100

E22

$2,62811 12 13 14

U

PPS/carbon rotors & Viton seals, ±395 PPG

F33

10

VP1901265

TS20AE85, gasohol, alcohols & solvents (not for perchlorethylene ). With Teflon™ seals in lieu of Viton Internals vary

with liquid, temp & visc.

150 PSI = 10 BAR2"



Anodized Aluminum, Wave Form

$5,604

VP1901

?

VS22237P846000-106

VP1901

X?9

H C STRF39

846000-106VP1901

VS22237P

Register ready

F36

ADD:

$6,510$5,610

$5,885

846000-106

F39 F36

2 U

$265

VS22237P

VP1901846000-106

+ Printer



F43

U2

T

B2

2 U

6 7 8

●●

●$2,768T

UE

? 2 U●

●

●

86 7

$4,704$4,704

$2,903 $4,979$2,628

$6,496

?

EMR3:Temperature/Volume Compensated

84569?-402, 846000-002 & 845893-21?

F49VP1901

X

?


?

V?

X?

V

109

X $7,402$5,596 $6,502


$6,502$5,596$2,768

$3,043$3,283 $6,111

No solenoid valve


Non-Compensated

Tank Truck service

Register ready

150 GPM = 570 lpmW&M rated capacity varies by country

EMR3/MID:COM

●●

E 22

2

V

2 U

F49+ Printer

EMR3/MID:COM



F46

$5,610

846000-106

F46

No solenoid valve

846000-106

$5,219●

● ??●

??

●$3,143

E

+ 12V 2-stg X-prf sol valve, UL/cUL With EMR3 Register = 84569?-401 & 845893-21?

Strainer (40 , 20 o r 100 mesh) with Air Eliminator & VP1901 Back Pressure Valve; optional Solenoid Valve to utilize Preset function

VP1901846000-106

13 1411 12

U

22 UE 2

40 mesh20 mesh

2

VP1901VP1901846000-106

VP1901

●


for HV & Teflon fitted valves● ? B2 U

U $6,125

● $223

blank or E for English front panel, insert S for Spanish or F for French

VS22237P

2 UE

$5,871 $6,777

2

+ Printer + Printer

F33/Vit F33/Tf l EMR3 20762509 3024 PRINTER 906

Sol Vlv 900 TVC 752

TW 140

HV 275VP19 119

- 12 -


Flow Meter with TS30AV22AStrainer, Air Eliminator andother components as selected

= Standard meter

1 2 3 4 5 11 12 13 14 15 16 17 18


1 2 3 4 5 11 12 13 14 15 16 17 18


Pos. 9 in P/No. L = Whole liter calibration



$4,707 $5,307

V30

G = Whole gallon calibration

$5,607 $6,427$6,127

$8,331

$6,376


$5,007 $8,821

▲


A = NPT companion flanges

$6,676 $8,001

? =>

? =>

● $6,127 $6,376$5,307$4,707V346 7 8 9 10 V23 V25 V26 V24


w ithout register

Register (LNC)

Register & Printer


Register & Preset

Buyer to add ratio gear plate, register &

printer (if desired)

▲$265ADDIf subject to 'Split Compartment' testing , on diesel fuel and higher viscosity liquids at 140+ GPM (530+ lpm), use 3" High Capacity strainer/air eliminator.

& VP1930


V17

E85, other alcohols & solvents. With optional Teflon seals. Not for use on halogenated solve

P R ESET A C V substH V ro to rsP R IN T ER LIN K/ VLV

V20 V13& VP1930 & VP1930 & VP1930 & VP1930 & VP1930

V22 V06 V09

$5,092$5,308$4,708

$4,792 $5,612$5,612$4,792

?

$5,912$6,128

?$4,192$4,492?

?


?



● ? ??

?

? ?? ?

?

? ?●

?

? ?

?●●

● ? ?● ? ?

●

?

?● ?

?

● ?

●

●●

●?

?

6 7 8

$4,1929

?10

Companion flanges:


●●

w ithout register

Register & Printer

Register (LNC)

with Back Pressure Valve


without preset valve

Register & Preset

$7,186$7,486

$8,006

$8,306

$7,701 $8,521$7,701 $8,521

ADD $265

$5,239 $5,839 $6,659 $7,006


$9,151

limited to 1000 cSt!without preset valve

$8,620

$5,861$5,861$6,161$6,475 $7,800

$8,006$7,186

W&M in US, Canada, EEC & Australia

High viscosity fuel & lube oils, viscosity > 300 cSt. HV rotors (& 20 mesh strainer baskeLiquid and operating conditions determine flow meter internals

limited to 1000 cSt!FLANGES

Heated oils, 120-180°F (50-80°C), Viscosity < 300 cSt. With HT rotors.Aviation Fuel, Bio-Diesel, Diesel Fuel, Light Fuel Oil, Gasoline, Glycols & Kerosene.

base/ B P V

3" Anodized Aluminum, Mechanical TS30APPS/carbon rotors & Viton seals200 GPM = 760 lpm 150 PSI = 10 BAR Tank Truck service

with Mechanical Valve/LinkageCALIBRATION

LN C / GP

- 13 -


= standard meter

& & & & &

1 2 3 4 5 15 16 17 18


& & & & &

1 2 3 4 5 15 16 17 18


with solenoid/air check valve: D for NPT or E for BSPOption: VP2310-1 = Air Check Valve in place of VP1930 back pressure valve ADD: ●

VP2313-1 = Air Check Valve/Teflon in place of VP1930 back pressure valve ADD: ●


$135 ▲EMR3 & IB

S = neither, with EL0300-1-13F for use with LCR-II register. Add: 2 = Register & IB, 1 = Register only (deduct $969) & 0 = neither, with EL0304●

40 or 10040 mesh20 mesh100 mesh

?

?

?

●●●

●

●

●

●

HVVP19TW

Sol Vlv300152140

1765 TVC 752

20763880 4396 PRINTER 906

U

F33/Vit F33/Tf l EMR3

T

H C STR

6

B2

T?X 2

?

846000-106VP1930

VS23237P

F36

PPS/carbon rotors & Viton seals, ±275 PPG

VS23237P846000-106

VP1930F36

14

F33


with l iquid, temp & visc.

150 PSI = 10 BAR3"



Anodized Aluminum, Wave Form

250 GPM = 1000 lpm

265

$7,873

VP1930846000-106

$7,014

EL0304 846000-106

X

VS23237P

9

$4,03211 12 13

ADD: $265

$8,779

+ Printer

F49

+ PrinterF39

F46 F49

84569?-402, 846000-002 & 845893-21?

VP1930F39

U

?

V

U

2??

2

U

●● ? T

V

?

●

VP1930


$6,108$6,108

$4,332 $6,408$4,032

$7,314$6,624

$7,014

846000-106 846000-106846000-106

+ Printer + Printer

?

X$265ADD:

$7,300 $8,206


$4,688$4,472

$7,516 $8,422

$9,671$7,000 $7,906

$7,906$7,000 $8,765

W&M rated capacity varies by country

No solenoid valve


Non-Compensated

Tank Truck service

+ 12V 2-stg X-prf sol valve, UL/cUL With EMR3 Register = 84569?-401 & 845893-21?

Strainer (40 , 20 o r 100 mesh) with Air Eliminator & VP1901 Back Pressure Valve; optional Solenoid Valve to utilize Preset function

Register ready

7

40 or 100

$4,172

? V

8 9

●

●

EMR3/MID:COM

●●

8 10

$4,172

●

6 7

X11 1210

2 U

E 3E

EL0304

F46

13 14

No solenoid valve

VP1930F43

VP1930

E 3

20 mesh100 mesh

EMR3:Temperature/Volume Compensated

$4,548

+ 12V 2-stg X-prf sol valve, UL/cULEMR3/MID:COM

40 mesh


2 U

2 U

U?

2

2 UT 2 UV

2 UE 32 UE 32 UE 3

VS23237P



3

VP1930 VP1930

$7,530

VP1930

Register ready

846000-106

Companion Flanges

●


for HV & Teflon fitted valves● ? B2 U

without solenoid/air check valve: A for NPT or B for BSP


● $531$505● ●

EM R3 cover blank or E for English front panel, insert S for Spanish or F for FrenchEM R3 listing U = UL/cUL listed, substitute A for ATEX version

- 14 -


& &1 2 3 4 5 15 16 17 18

T S 1 5 A ▲ ▲ ▲ TS15AF83?SUES ▲T S 2 0 A ▲ ▲ ▲ TS20AF83?SUES ▲T S 3 0 A ▲ ▲ ▲ TS30AF83?SUES ▲

& &1 2 3 4 5 15 16 17 18

T S 1 5 A ▲ ▲ ▲ TS15AF86?SUES ▲T S 2 0 A ▲ ▲ ▲ TS20AF86?SUES ▲T S 3 0 A ▲ ▲ ▲ TS30AF86?SUES ▲

= with Register only (2nd flow meter in 2 meter system ), deduct $969 list.= neither, EL0304 only (register ready for EMR 3 & MID:COM)= neither, 100 PPG scaler for use with LCR-II™ EL0300-1-13C for TS15A

EL0300-1-13E for TS20A EL0300-1-13F for TS30A

** Please refer to page 24 for signal conditioner, when register is not supplied by Tuthill.Please seee page 18 for other options, incl. Currency (or mass) option in the register.Subject to change w ithout notice.

US configuration

TS20AF96AX2U(Canadian approval pending)

2 UEE

13

2

S

= with Register & Interconnect B

$6,107SS

S = with 3-way solenoid valve kit

U = UL listed, substitute A for ATEX versionE = English front panel, insert S for Spanish or F for French

$9,943$7,943

$6,242

2

E

UE11

2

1" - 3"

+ +

F83

E

13

E

Meter assy includes:Inlet strainer w ith check valve, vapor eliminator w ith relief valve & differential check valve on meter outlet

200 GPM = 760 lpm

+ +

Register/Printer

2077

60 GPM = 230 lpm

100 GPM = 380 lpm

$4,107UX

10

X $3,7182

12

$6,606

LPGservice

10

$3,5936 7 8

$6,679

846000-106

$7,192$6,317

846000-106 846000-106

Register

9

Anodized Aluminum, ElectronicPPS/carbon rotors & UL Buna N seals

? X $5,804

F95

?

8

?

LCR-II™ Register Ready

Register mounting pad, Thermo Well and

EL0300-1-13_ 100 PPG scaler (scaler shown as sep. item)

9

F98Register/Printer

EL0304, thermo well & register mtg. pad

CABLE$198SOL V $379

6 7

TVC

PRINT $906Temperature Compensated$752

?

11 12

U2

$9,068X $5,981UXU

$3,982

TS15A

2" x 2"TS20A

Non-Compensated

1½" x 1½"

3" x 2"TS30A Same, except no check valve

LCR-II™ Register Ready

884 2455 884

EMR3 Register, Interconnect Box, 3-w ay sol. valve & 35' (10 m) cable

$2 076?

14

SSS

? X $8,606

Companion flanges: A = NPT & B = BSP

0S

Register mounting pad & EL0300-1-13_ 100 PPG scaler

(scaler shown as sep. item)

EMR3 or MID:COM Register Ready

EL0304 & Register mounting

pad

EMR3 or MID:COM Register Ready

EMR3 Register, temp probe, IB, 3-w ay sol. valve & 35' (10 m) cable

RegisterF93

$6,193 $7,068

846000-106

21

$3,728$4,117$6,116

14

$8,193

F86 F96

$3,853$4,242

- 15 -


Stainless Steel - Chemical Transport Meters1" - 3", Mechanical Register

Model TS10C 1"Model TS15C 1½"Model TS20C 2"Model TS30C 3" ANSI

Meter base price does not include strainer & air eliminator.

1 2 3 4 5

T S 1 0 C ▲ ▲ ▲T S 1 0 C ▲ ▲ ▲T S 1 0 C ▲ ▲ ▲T S 1 0 C ▲ ▲ ▲T S 1 5 C ▲ ▲ ▲ ▲ ▲ ▲ ■T S 1 5 C ▲ ▲ ▲ ▲ ▲ ▲ ■T S 1 5 C ▲ ▲ ▲ ▲ ▲ ▲ ■T S 1 5 C ▲ ▲ ▲ ▲ ▲ ▲ ■T S 2 0 C ▲ ▲ ▲ ▲ ▲ ▲ ■T S 2 0 C ▲ ▲ ▲ ▲ ▲ ▲ ■T S 2 0 C ▲ ▲ ▲ ▲ ▲ ▲ ■T S 2 0 C ▲ ▲ ▲ ▲ ▲ ▲ ■

Gallons: T = 1/10th T = 1/10th T = 1/10thLiter: Y = 1/10th L = Whole L = Whole

C = other (consult for availability & pricing )

T S 3 0 C ▲ ▲ ▲T S 3 0 C ▲ ▲ ▲T S 3 0 C ▲ ▲ ▲T S 3 0 C ▲ ▲ ▲

Gallons: G = WholeLiter: L = Whole


Low viscosity chemicals, LV rotors/carbon bearings (= standard meter).

Without ValveRegister Ready**

Register (LNC)

Register & Printer

C? CJ M $5,539 $6,139$6,824 $8,149

TS20CV15AT

$9,244 $5,000$8,969 $5,000

$6,864 $8,189 $9,009

● C? $8,123 $8,723 $9,543$9,243C? $7,823 $8,423CCM●

● C? $7,823 $8,423● C? $7,523 $8,123

●? $5,264 $5,864 $6,684CCM●

$5,000$5,000

● ? ? $5,304 $5,904 $6,724$6,449 $6,589 $7,914 $8,734

$7,854 $5,000● ? ? $5,029 $5,629

$4,749 $5,569 $5,709 $7,034●$5,519 $6,844 $7,664 $5,000

$5,000● ? ? $3,959 $4,559 $5,379

$5,419 $5,559 $6,884 $7,704$7,514 $5,000

● ? ? $3,999 $4,599$4,409 $5,229 $5,369 $6,694? ?

●●

●●

Resins, Fertilizer & Herbicides, HV rotors with Teflon bearingsLow viscosity incompatible with carbon, LV rotors with Teflon bearings

High viscosity (300+ cSt) & heated liquids 120-180°F (50-80°C), HV rotors/carbon bearings

Calibration: TS10C TS15C TS20C

V04 V07

3" model with ANSI flanges

(mechanical valve not available) V03

M

C I M

C I M

Register Ready**

VR1 $600

VR2 $1,420

VR4 $2,145

$3,743

$2,833

VR3 $1,325Register

(LNC)

CCMCJ

Mechanical 150 PSI = 10 BAR60 GPM = 230 lpm

150 GPM = 570 lpm200 GPM = 760 lpm

Calibration:

C

Electronic 400 PSI = 28 BAR

Mechanical Meter, Mechanical Register

V07V03

CCM

C $3,143$3,809

C? $4,149CJ M

?C I M

? na$2,953 $3,553

6 7 8 109

?

I M

CJ M

$7,099 $8,424

$8,943

●

?? ?

V18

$3,623

12 13

$3,023

11

na

Without Valve

40 GPM = 150 lpm

na

Limited to 1000 cSt!

TS30C

$3,433 na

$6,959

AC2572SS

Add for Strainer

& Air Eliminator

Register & Printer

Register Ready**

V11 V15V04

+ Mechanical Linkage/Valve

LNC, T/P & Preset

Register & Preset

$9,243

316SS, low viscosity PPS/carbon rotors & Teflon seals

A = NPT or B = BSPCompanion flanges:

? ?

- 16 -


Stainless Steel - Chemical Transport Meters1" - 3", EMR3 Electronic Register


Meter base price does not include strainer & air eliminator.

& EL0304 & & & EL0304 & &1 2 3 4 5

T S 1 0 C ▲ ▲ ▲ ▲ ▲ ▲T S 1 0 C ▲ ▲ ▲ ▲ ▲ ▲T S 1 0 C ▲ ▲ ▲ ▲ ▲ ▲T S 1 0 C ▲ ▲ ▲ ▲ ▲ ▲T S 1 5 C ▲ ▲ ▲ ▲ ▲ ▲T S 1 5 C ▲ ▲ ▲ ▲ ▲ ▲T S 1 5 C ▲ ▲ ▲ ▲ ▲ ▲T S 1 5 C ▲ ▲ ▲ ▲ ▲ ▲T S 2 0 C ▲ ▲ ▲ ▲ ▲ ▲T S 2 0 C ▲ ▲ ▲ ▲ ▲ ▲T S 2 0 C ▲ ▲ ▲ ▲ ▲ ▲T S 2 0 C ▲ ▲ ▲ ▲ ▲ ▲T S 3 0 C ▲ ▲ ▲T S 3 0 C ▲ ▲ ▲T S 3 0 C ▲ ▲ ▲T S 3 0 C ▲ ▲ ▲


±275 PPG

316SS, low viscosity PPS/carbon rotors & Teflon seals±2176 PPG±1152 PPG±395 PPG

Electronic Flow Meter400 PSI = 28 BAR

Accessories:150 PSI = 10 BAR

150 GPM = 570 lpm

Please consult

846000-106 846000-106 846000-106 846000-106

$9,184 $10,090$8,909 $9,815

$3,406 $6,234 $7,140

$6,830$3,096$3,286

200 GPM = 760 lpm

without compensationwith Thermo Well in Y-type strainer

Resins, Fertilizer & Herbicides, HV rotors with Teflon bearings

40 GPM = 150 lpm60 GPM = 230 lpm

$7,848 $9,924 $10,830

$10,530$7,548 $9,624 $10,530

$7,248

CJ 2 U●

●U

$7,548 $9,624CV 2 UCC2

●$9,324 $10,230CX 2 U●

$5,264 $7,340 $8,246 $6,356● ? J 2 U$4,989 $7,065 $7,971 $6,081

$9,855● ? C2 U

$5,029 $7,105 $8,011 $6,121$8,674$6,830 $7,736 $5,846$8,949? V 2 U●

X 2 U $9,580$4,754●$7,547 $8,453$7,357 $8,263

●$4,529

J 2 U $3,874 $5,950 $6,856 $4,719U $3,684 $5,760 $6,666

$4,569 $7,397 $8,303● ? C2

? V 2 U●

●●

●●

●

Low viscosity incompatible with carbon, LV rotors with Teflon bearingsHigh viscosity (300+ cSt) & heated liquids 120-180°F (50-80°C), HV rotors/carbon bearings

Low viscosity chemicals, LV rotors/carbon bearings (= standard meter).

$3,534 $5,610 $6,516 $4,379 $7,207

prtr 906cable 198

S+ftgs 1037

S+ftgsS+ftgs

$8,113

U

803

C

? X 2 U

?

511

?

6 7

?22

V

Register ready**

8 9 10 12

+

Electronic Flow Meter with EMR3 Register, US config.

F31

11

$2,55813

2 = Register & IB, 1 = Register only (deduct $969) & 0 = neither, with EL0304

? J U

U = UL listed, substitute A for ATEX version

$5,850

$4,634$4,824

$2,678$2,868

$4,754$4,944

$5,660

$3,724

blank or E for English front panel, insert S for Spanish or C for Canadian French

$5,540$5,730

$6,950$3,216

$5,800 $6,706

$6,044

F34

Register ready**

Temperature Compensated

+

Strainer/TW

F41

$7,020$5,924$6,114

2 U2 U $2,748

+ Printer

?

+

F44Register

F37

? X

TS15AF31 (Canadian approval pdg)

S = for use with LCR-II™ register, add EL0300-1-13_: Add $135 list

See page 18 for DataLink wireless communications & other register options.

Register

Flow Meter only, add for Strainer/Air Elim. per page 15

? = A for NPT or B for BSP companion flanges (does not apply to TS30C ).

F47+ Printer

+

Flow Meter only Pls consult for Str/AE

- 17 -

0°F 15°F 30°F 45°F 60°F 80°F 100°F 130°F 170°F Minimum Liquid-17.8°C -9.4°C -1.1°C 7.2°C 15.6°C 26.7°C 37.8°C 54.4°C 76.7°C Temperature

SAE10 & SAE20 0.23 0.29 0.36 0.44 0.52 0.59 0.70 0.79 0.90SAE30 & SAE40 0.15 0.21 0.26 0.31 0.38 0.48 0.56 0.70 0.81

SAE50 0.13 0.18 0.23 0.28 0.33 0.42 0.52 0.64 0.76

Correction factors to model nominal capacity

Derating on Lube Oils:


TN Series, +/-2%Anodized Aluminum with Viton seals

US$, Ex Works, Fort Wayne, IN if no TM or TS products.US$, Ex Works, Tickfaw, LA if with TM or TS products.

TN860A 1½" NPT 150 PSI 6-60 GPM1½" BSP 10 BAR 23-230 lpm

Seal upgrade: Teflon/Chemrez for alcohol & solvent service SL2157, SL4008, SL4010 & SL2013(distributor to instal l) EPR for ALS service (Aviation Lavatory Service) SL5157, SL5008, SL5010 & SL5013

TN740A 1" NPT 1000 PSI 0.5-10 GPM1" BSP 69 BAR 2-38 lpm

TN760A 1½" NPT 400 PSI 0.8-15 GPM1½" BSP 28 BAR 3-57 lpm B1N1 CB8 6 0 A

▲T N7 6 0 AN1 C $850AB1 L A FL A F

2 GA F1 CAB

L A I

T N7 6 0 AN

CBA10 AN1▲T N7 4 0 AN1 CT A I $950AA1 L A ICAA20 AN1T N7 4

1/10 gallon register (999.9) Whole liter register (9,999)

B1 L AT N1 C

Whole gallon register (9,999 Whole liter register (9,999)T AN1 C8 6 0

T N7 4

T N

▲N8 6 0 A

$595N AB

CAB1 LC

AN1 CGACAB1N8 6 0

Mechanical Register, 4 digit

Whole gallon register (9,999 Whole liter register (9,999)

Calibrated for Biodiesel, Diesel Fuel, E1 to E15, Fuel Oil No. 2, Gasoline, Kerosene & Water (field calibrate for actual fluid

Calibrated for Automotive Lubricants, Heavy Fuel Oil, Gear Oil & Molasses

$85 ▲$25 ▲

T

Aluminum,Buna/Viton seals

807 1" 50 PSI 5-20 GPM NPT, 1/10 gal3 digit mechanical register 3.5 BAR 19-75 lpm NPT, liter

BSP, liter

901 1½" 50 PSI 6-40 GPM NPT, 1/10 gal4 digit mechanical register 3.5 BAR23-151 lpm NPT, liter

BSP, liter

Nickel plated aluminum,EPR seals

TN620 1" 85 PSI 2-20 GPM NPT, 1/10 gal3 digit mechanical register 6 BAR 8-75 lpm NPT, liter

BSP, liter

$180 ▲

$260 ▲0 1 1

L 17

08 0 7 C

7 C

0 C1

L 1 X 4

9 0 1 L0 1 L 1 . 5 X

Strictly for ALS 'Blue Water'; minimum order 24 pcs.

1 . 5. 5

1 8

Mechanical, UL listed

Mechanical, ALS ServiceT

8

8

9

for low viscosity refined fuels only (not to exceed E15), not for use on water.

$190 ▲T 6 2 0T

AL

4 1 89

QN6 2 0 BLN

Q

0 QN6 2

- 18 -

Options for TS Series flow meters with EMR³ electronic register: US$ List Lead Time

Currency Function in the EMR³ Electronic Register: • Upgrade 84569?-401 (non-compensated) to 84569?-403 with currency function Add $278 ▲ • Upgrade 84569?-402 (temperature compensated) to 84569?-404 with currency function $278 ▲

This function can also be used to display mass of volume dispensed. DataLink™ = wireless communications from trucks to home office: • 846000-030 Home office receiver kit with . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2,141 ▲ • 846000-033 Optional high gain antenna for home office receiver station . . . . . . . . . . . . . . $810 ▲ • 846000-031 EMR³ truck kit (transmitter) for register with keypad kit . . . . . . . . . . . . . . . . . $2,141 ▲ • 846000-032 EMR³ truck kit (transmitter) for register without keypad kit . . . . . . . . . . . . . . . $1,792 ▲ In multi-register systems, you only need 1 transmitter for each IB. Miscellaneous options: • 846000-014 Keypad kit, permits direct numerical entry of preset volume . . . . . . . . . . . . . . . . . $410 ▲ • 846000-021 Emergency STOP button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $127 ▲ Cable kits: The cable kit is always shown separately. Base price includes one 846000-106: • Standard 846000-106 35’ = 10.66 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $198 ● • Alternate 846000-101 100’ = 30.48 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $461 ● • 846000-102 200’ = 60.96 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $834 ▲ • 846000-103 300’ = 91.44 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,222 ▲ • 846000-104 400’ = 121.92 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,611 ▲ • 846000-105 500’ = 162.40 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2,088 ▲

Please consult for longer cable kits (up to 1250’ = 381 m). Solenoid Valves: 24 VDC in place of 12VDC: TS10A, TS15A & TS20A substitute VS22247 for VS22237 same price ■ TS30A model substitute VS23247 for VS23237 same price ■

ATEX Certified in place of UL/cUL listed solenoids Please consult ■■ NEMA 4X in place of NEMA 7/4X Water Prf Expl-Prf TS10A, TS15A & TS20A 12V substitute VS22234 for VS22237 Deduct $155 ▲ 24V substitute VS22244 for VS22247 Deduct $155 ■ TS30A model 12V substitute VS23234 for VS23237 Deduct $155 ▲ 24V substitute VS23244 for VS23247 Deduct $155 ■

ATEX Certified in place of UL/cUL listed solenoids Please consult ■■


- 19 -


The P/No. consists of 3 segments:

=

V21 = with Strainer

Electro-Mechanical Tank Truck Meter Assemblies

P o s. in P / N o .

Assy. No.

T S 2 0 X XModel No.

A

with Strainer & Air Elimin.

= Anodized Aluminum

76

V22 =

C

V03 =

=

B

EMR3 register components, solenoid valve & other options are shown separately in the order.EMR3 register is version with drive shaft & internal pulser. Specify English or French (Quebec) front panel.

A =Flange Kit included:

NPT companion flangeother (shown separately)C

4

3" High Capacity strainer w Thermo Well

=

205==

Defines Register & Accessories.

A

131081 52 3

B Teflon

?9

C ?11 12 14

M15

?Variables

Flow Meter only

V 2 2 A

= 316 Stainless Steel

? ?16 17 18

TW

204203

Thermo Well in standard strainer=

Rotors

202 = 2" High Capacity strainer

2" High Capacity strainer w Thermo Well3" High Capacity strainer

A = VitonSeals

= HV PPS/carbon

= LV PPS/carbon Standard

High Temp.High Viscosity

V23 = with S, A/E & Air Check valve

L = HT PPS/carbonI

- 20 -


= standard meter

& & & & &

1 2 3 4 5 15 16 17 18

T S 1 5 A ● ● ● ▲ ▲T S 1 5 A ▲ ▲ ▲T S 1 5 A ▲ ▲ ▲T S 1 5 A B ▲ ▲ ▲

& & & & &

1 2 3 4 5 15 16 17 18

T S 1 5 A AT ● ● ● ▲ ▲T S 1 5 A AT ▲ ▲ ▲T S 1 5 A AT ▲ ▲ ▲T S 1 5 A BT ▲ ▲ ▲

Specify EMR3 front cover language: English . . . . . . . . . . = 845693-210 & 845693-211 respectivelyCanadian French = 845695-210 & 845695-211 respectively

Option: VP2250-1 = Air Check Valve in place of VP1901 back pressure valve ADD: ● VP2257-1 = Air Check Valve/Teflon in place of VP1901 back pressure valve ADD: ●

Subject to change w ithout notice.See page 17 for DataLink wireless communications and other register & valve options.

752

$6,768

$5,876

$5,543

VP1901

TW 140Sol Vlv 900Printer 906

● $223

X $5,862

VP1901

$6,259$6,259$5,353

TM-U295-071

●

Limited to 150-175 cSt (7-800 SSU). Pls consult with application details

for HV & Teflon fitted valves● AX CBM

B

$3,034




VP1901 VP1901846000-106

No solenoid valve

846000-106

X

X

11

C I MX

13 14

CBMX

V

12

CL

10

A

A C2

$5,367M $2,385 $4,461

$2,894

X


XMX2 X

IX

846000-106

$4,970$2,575 $4,651

VP1901

●

●

6 7

●● V 2

V 2

●●

TVC

PPS/carbon rotors & Viton seals

No solenoid valve


Non-Compensated, all incl. back pressure valve

Tank Truck service

+ 12V 2-stg X-prf sol valve, UL/cUL With EMR3 Register = 84569?-210 & 845893-211

A

6 7 8

MXM

$5,361

VP1901846000-106

Strainer (40 , 20 o r 100 mesh ) with Air Eliminator & VP1901 Back Pressure Valve; optional Solenoid Valve to utilize Preset function

HV VP1901190 119

MXX

$5,367

$5,557

EMR3:Temperature/Volume Compensated, all incl. back pressure valve

84569?-211, 846000-002 & 845893-211EMR3 Register Ready

VS23237PWWW

$2,525$2,525

$2,715$5,353

VS23237P

$6,4492

846000-106

WX

CL

V 2

V$6,253

TM-U295-071331791-001

$7,159

X

B

C

● ●

8 9

A2 A

2

A

$206

$4,4619

$2,38511 12 13 1410

CA

VP1901846000-106

VP1901


with l iquid, temp & visc.

150 PSI = 10 BAR1½"


Canada60 GPM = 230 lpm

Anodized Aluminum/EMR3 Register

EMR3 Register Ready

846000-106 VP1901

TM-U295-071

$6,267

846000-106 VP1901

VS23237P

V22/Tfl2266 2775EMR3 2076

V22/Vit

V 2 2V 2 2

2 2V 2 2

VS23237P TM-U295-071331791-001 331791-001

331791-001

- 21 -


= standard meter

& & & & &

1 2 3 4 5 15 16 17 18

T S 2 0 A ● ● ● ▲ ▲T S 2 0 A ▲ ▲ ▲T S 2 0 A ▲ ▲ ▲T S 2 0 A B ▲ ▲ ▲T S 2 0 A A2 0 2T S 2 0 A A2 0 2 ▲T S 2 0 A A2 0 2

& & & & &

1 2 3 4 5 15 16 17 18

T S 2 0 A AT ● ● ● ▲ ▲T S 2 0 A AT ▲ ▲ ▲T S 2 0 A AT ▲ ▲ ▲T S 2 0 A BT ▲ ▲ ▲T S 2 0 A A2 0 4T S 2 0 A A2 0 4 ▲T S 2 0 A A2 0 4




VS23237P331791-001

WWWW

VS23237P TM-U295-071331791-001 331791-001

V 2 2

V 2 2V 2 2

V 2 2V 2 2

V 2 2

V 2 2V 2 X

H C STR 265Printer 906

V 2 2

$265

$6,510

846000-106

A

CL

AX C

X

VP1901

VS23237P

EMR3 Register Ready

846000-106 VP1901

ADD:

TS20AE85, gasohol, alcohols & solvents (not for perchlorethylene ). With Teflon™ seals in lieu of Viton

14

VP1901846000-106

TM-U295-071

150 PSI = 10 BAR2"



$5,604

VP1901846000-106

9

$2,62811 12 13

$206

2 X

I

A

X

B

C2 2C

A

V

6 7 8

2

A

A

V

V

A

10

●● AX

XV 2 2



A

●

● ●

8 9

A2

●

$2,903 $4,979$2,628

$5,610$5,610$5,885

84569?-211, 846000-002 & 845893-211

● AX2 2



X

846000-106846000-106

VS23237P

$6,777

$6,496

TM-U295-071331791-001

TM-U295-071

$2,768

A

XA

X

CL MXX

$265ADD:

$7,402$5,596 $6,502


$6,502$5,596$2,768

$3,043

Anodized Aluminum/EMR3 RegisterPPS/carbon rotors & Viton seals

No solenoid valve



Tank Truck service


Internals vary with l iquid, temp & visc.

●●

2076 VP1901

$4,704$4,704X


M

●

●

6 7

●

● 2

● V 2

MX

EMR3 Register Ready

846000-106

$5,219

VP1901


$3,143


VP1901 VP1901

$6,125

L

C I

CB

XMX

M

MX

MM

X

C

10 13 14

X

X

B

11 12

X

C I MX

CBM

CBMXCL MXC I MX

●


for HV & Teflon fitted valves● AX CBM $6,111 $7,017$5,871

VP1901

No solenoid valve

846000-106 VP1901

● $223

$3,283X

V22/Vit V22/Tfl HV VP19012509 3024 275 119EMR3

Sol Vlv 900TW 140TVC 752

- 22 -


= standard meter

& & & & &

1 2 3 4 5 15 16 17 18

T S 3 0 A ● ● ● ▲ ▲T S 3 0 A ▲ ▲ ▲T S 3 0 A ▲ ▲ ▲T S 3 0 A B ▲ ▲ ▲T S 3 0 A A2 0 3T S 3 0 A A2 0 3 ▲T S 3 0 A A2 0 3

& & & & &

1 2 3 4 5 15 16 17 18

T S 3 0 A AT ● ● ● ▲ ▲T S 3 0 A AT ▲ ▲ ▲T S 3 0 A AT ▲ ▲ ▲T S 3 0 A BT ▲ ▲ ▲T S 3 0 A A2 0 5T S 3 0 A A2 0 5 ▲T S 3 0 A A2 0 5




VS23237P331791-001

WWWW

VS23237P TM-U295-071331791-001 331791-001

V 2 2

V 2 2V 2 2

V 2 2V 2 2

V 2 2

V 2 2V 2 X

H C STR 265Printer 906

V 2 2

$265

$8,779

846000-106

A

CL

AX C

X

VP1901

VS23237P

EMR3 Register Ready

846000-106 VP1901

ADD:

TS30AE85, gasohol, alcohols & solvents (not for perchlorethylene ). With Teflon™ seals in lieu of Viton

14

VP1901846000-106

TM-U295-071

150 PSI = 10 BAR3"



$7,873

VP1901846000-106

9

$4,03211 12 13

$505

2 X

I

A

X

B

C2 2C

A

V

6 7 8

2

A

A

V

V

A

10

●● AX

XV 2 2



A

●

● ●

8 9

A2

●

$4,332 $6,408$4,032

$7,014$7,014$7,314

84569?-211, 846000-002 & 845893-211

● AX2 2



X

846000-106846000-106

VS23237P

$8,206

$8,765

TM-U295-071331791-001

TM-U295-071

$4,172

A

XA

X

CL MXX

$265ADD:

$9,671$7,000 $7,906


$7,906$7,000$4,172

$4,472

Anodized Aluminum/EMR3 RegisterPPS/carbon rotors & Viton seals

No solenoid valve



Tank Truck service


Internals vary with l iquid, temp & visc.

●●

2076 VP1901

$6,108$6,108X


M

●

●

6 7

●

● 2

● V 2

MX

EMR3 Register Ready

846000-106

$6,624

VP1901


$4,548


VP1901 VP1901

$7,530

L

C I

CB

XMX

M

MX

MM

X

C

10 13 14

X

X

B

11 12

X

C I MX

CBM

CBMXCL MXC I MX

●


for HV & Teflon fitted valves● AX CBM $7,516 $8,422$7,300

VP1901

No solenoid valve

846000-106 VP1901

● $531

$4,688X

V22/Vit V22/Tfl HV VP19013880 4396 300 152EMR3

Sol Vlv 1765TW 140TVC 752

- 23 -


Stainless Steel - Chemical Transport Meters1" - 3", EMR3 Electronic Register on mechanical flow meter


& & & & 845893-211 845893-211 846000-002 846000-002

TM-U295-071331791-001 TM-U295-071

1 2 3 4 5 331791-001T S 1 0 C ▲ ▲ ▲ ▲ ▲ ▲T S 1 0 C ▲ ▲ ▲ ▲ ▲ ▲T S 1 0 C ▲ ▲ ▲ ▲ ▲ ▲T S 1 0 C ▲ ▲ ▲ ▲ ▲ ▲T S 1 5 C ▲ ▲ ▲ ▲ ▲ ▲T S 1 5 C ▲ ▲ ▲ ▲ ▲ ▲T S 1 5 C ▲ ▲ ▲ ▲ ▲ ▲T S 1 5 C ▲ ▲ ▲ ▲ ▲ ▲T S 2 0 C ▲ ▲ ▲ ▲ ▲ ▲T S 2 0 C ▲ ▲ ▲ ▲ ▲ ▲T S 2 0 C ▲ ▲ ▲ ▲ ▲ ▲T S 2 0 C ▲ ▲ ▲ ▲ ▲ ▲T S 3 0 C ▲ ▲ ▲T S 3 0 C ▲ ▲ ▲T S 3 0 C ▲ ▲ ▲T S 3 0 C ▲ ▲ ▲


$6,229 $7,135$5,872

$4,656$4,846

$5,682

$3,091$3,281

$3,401

$6,825

prtr 906cable 198

XA

9 10

A I M

8

3

Non-Compensated

M

1312

J

V

Register

Mechanical Flow Meter with EMR3 Register, Canada config.

+ + +

0 3

+ Printer

AX $2,58011

0 30 3

High viscosity (300+ cSt) & heated liquids 120-180°F (50-80°C), HV rotors/carbon bearingsLow viscosity chemicals, LV rotors/carbon bearings (= standard meter).

Flow Meter only, add for Strainer/Air Elim. per page 15

CM

6 7

XVV

0

Register ready**

Temperature CompensatedFlow Meter only

Pls consult for Str/AE

$5,562$5,752$2,770

$3,746

$2,700$2,890

$4,776$4,966

$7,015$6,945$3,211

$5,919$6,109$6,039

? = A for NPT or B for BSP companion flanges (does not apply to TS30C ).

846000-106

$4,359 $7,187 $8,093$5,822 $6,728 $4,549

Register

$3,556 $5,632 $6,538

+ Printer

Resins, Fertilizer & Herbicides, HV rotors with Teflon bearingsLow viscosity incompatible with carbon, LV rotors with Teflon bearings

846000-106

84569?-211

845893-211846000-106

TS15C 3556

+

Register ready**

●●

●

TS20C 4776TS30C 7270EMR3 2076

AX●

● V 0AV X

● V 0 3 AX I M3

$7,377 $8,283● V 0 3 AX CM $3,706 $5,782 $6,688 $4,509 $7,337 $8,243

● V 0 3 AX J M $3,896 $5,972 $6,878 $4,699 $7,527 $8,433● V 0 3 AX $4,776 $6,852 $7,758 $5,813 $8,641 $9,547

● V 0 3 AX I M $5,051 $7,127 $8,033 $6,088 $8,916 $9,822● V 0 3 AX CM $5,011 $7,087 $7,993 $6,048 $8,876 $9,782

● V 0 3 AX J M

$9,646● V 0 3 CX $9,346 $10,252

$10,057$7,270

$7,362 $8,268 $6,323 $9,151$5,286

$10,552● V 0 3 CX I M $7,570CX CM● V 0 3 $9,646 $10,552$7,570

$9,946 $10,852

Please consult

● V 0 3 CX J M $7,870

Accessories:200 GPM = 760 lpm 150 PSI = 10 BAR

40 GPM = 150 lpm Electronic Flow Meter60 GPM = 230 lpm 400 PSI = 28 BAR

150 GPM = 570 lpm

316SS, low viscosity PPS/carbon rotors & Teflon seals

84569?-210 84569?-210

846000-106

84569?-211

845893-211

with Thermo

Well in Y-type Strainer

Meter base price does not include strainer & air eliminator.TS10C 2580

TP 90610Y 51115Y 80320Y 1037TVC 752

190 150

275 235

HV Tefl

190 120

300 300

See page 17 for DataLink wireless communications & other register options.

- 24 -

FPP140$ effective January 1, 2009, US$, Ex Works, Tickfaw, LA, USA Subject to change without notice

Tuthill electronic flow meters have an internal pulser. This design is cost efficient, but requires careful matching of flow meter to register. Tuthill has had 3 versions of the electronic flow meter. In 2009 we are in a transition between the 2nd and 3rd genera-tions: 1st Generation - 1996-2003 The original design had 4 magnets imbedded in the oval gears, and a pulser that extended through the front cover and the post plate assy. This low resolution design was phased out in 2003. 2nd Generation - 2003-2009 In this version, the flow meter has a disc magnet, riding on a shaft attached to the bearing plate. Depending upon model size, the disc magnet has 4, 6, 8 or12 poles => 4-12 pulse signals per revolution of the oval gears. This intermediate resolution design produces (with frequency shown for 100% of model capacity):

TS10A 136 PPG (90.7 Hz) TS10D 136 PPG (90.7 Hz) TS15A 188 PPG (188 Hz) TS15C 108 PPG (108 Hz) TS20A (100 GPM) 101 PPG (169 Hz) TS20C (100 GPM) 101 PPG (169 Hz) TS20A (150 GPM) 72 PPG (180 Hz) TS20C (150 GPM) 72 PPG (180 Hz) TS30A 51 PPG (170 Hz) TS30C 51 PPG (170 Hz) 3rd Generation - 2007 + The ‘Wave Form’ pulser design has been introduced gradually since mid-2007. It is based on a single magnet turning in the vertical plane, producing 64 pulses per revolution of the oval gears. In addition to increasing the K Factor for all models, in this design there are several other advantages over other flow meters, since the register is now mounted on top of the flow meter rather than on the front cover:

• The flow meter can be serviced without removing the register. • The assembly is about 5” smaller front to back. • No risk of swapping registers between flow meters.

The high frequency Wave Form pulser produces:

TS10A 1728 PPG (1152 Hz) TS10C 2176 PPG (1451 Hz) TS15A 1013 PPG (1013 Hz) TS15C 1152 PPG (1152 Hz) TS20A (150 GPM) 395 PPG (987 Hz) TS20C (150 GPM) 395 PPG (180 Hz) TS30A 272 PPG (917 Hz) TS30C 272 PPG (917 Hz) TS30A @ 250 GPM (1133 Hz) TS30C @ 250 GPM (1133 Hz)

However, in some cases Wave Form pulser frequency exceeds, what various electronic registers can accept. Some registers and/or loading rack controllers are subject to limitations in terms of:

a. Pulse resolution (many older controllers are limited to 1, 10 or 100 PPG or ppl). b. Pulse frequency (we have seen as low as 10 Hz!). c. Pulse width (how many milliseconds power is ON & OFF for each pulse). d. Pulse signal strength (if the register/controller is remote, and more than 100’ [30 m] from the flow meter).

When ordering electronic TS Series flow meters for use with an electronic register sourced from other side, it is distributor re-sponsibility to verify signal compatibility and possible signal conditioner required. Some known requirements:

• Tuthill ELNC register requires the EL0300-?-13? scaler (normally 5V DC regulated, where 1st ? = 1). • Veeder-Root EMR³ register is fine with the Terminal Block Board (EL0304).

♦ Make certain to order the -401, -402, -403 or -404 version of the register. ♦ Do not order -210, -211, -310 or -311 versions, which require a drive shaft input. (presently used only in Canada).

• The LectroCount™ from LC requires the EL0300-?-13? scaler (normally 5V DC regulated, where 1st ? = 1). • AccuLoad & newer Danload controllers should be OK with the Terminal Block Board (EL0304).

♦ Older Danload controllers require the EL0300-?-13? scaler (normally 5V DC regulated, where 1st ? = 1). • Many ‘keylock’ & ‘cardlock’ systems are limited in terms of frequency, and require a relatively high pulse ON/OFF time.

Tuthill has EL0300 established for specifically 100 PPG (= min. 1.3 ms ON/OFF) and 10 ppl (= min. 2.5 ms ON/OFF) for each flow meter model.

Terminal Block Board or SCL (required when other electronic registers are used) in place of TBB: • EL0304 Terminal Block Board, for use with EMR³ . . . . . . . . . . . $25 list (incl. in price of ‘Register Ready’ ) • EL0306 Terminal Block Board, for use with non-Quad registers $50 list • EL0300-?-13? SCL with 100 PPG resolution . . . . . . . . . . . . . . . . . . . . $135 list • EL0300-?-18? SCL with 10 ppl resolution . . . . . . . . . . . . . . . . . . . . . . $135 list

1st ? = 1 for 5 VDC regulated, 3 for 6-12 VDC or 5 for 24-28 VDC 2nd ? = A for TS10C, B for TS10A, C for TS15A, D for TS15C, E for TS20A & TS20C and F for TS30A & TS30C.

When ordered in place of EL0304, $160 if ordered for retrofit.

- 25 -

Tuthill Transfer Systems (TTS) Terms & Conditions

Terms of Sale: Ex Works, Tickfaw, LA (selected items might ship from other locations). • Currency : All prices are in US$. • Payment terms : Net 30 days; subject to credit approval. • Net minimum billing : US$75.00 net.

Delivery: TTS makes every effort to ship standard petroleum service meters in 2-4 weeks, and often sooner. However, the production schedule can fluctuate from time to time, so please consult prior to making a firm delivery commitment to the end user. Non-standard options, ANSI flange adaptors and accesso-ries purchased to order are normally subject to longer lead times (6-10 weeks).

Cancellation: After a firm order has been accepted, cancellation charges may apply: • Flow meter & standard FPP components: 10-25%, depending upon degree of readiness. • Electronics built or purchased to order : 25-75%, depending upon degree of readiness.

Shipping Damage: Flow meters are packed securely for shipment., but on rare occasions damage might occur. • If damage is noticed or suspected, DO NOT reject the shipment (it may jeopardize your claim). • Sign for the shipment with reservation for visible/concealed damages. • Notify the carrier and request inspection. • Notify Customer Care, so we may prepare replacement parts/material if necessary.

Return Goods: No return shipments are accepted without prior written TTS authorization. • The RGA will indicate ship to address (if other than Tickfaw, LA). • A copy of the RGA must be included in the package. • The return item must be packaged securely. Damage in transit due to inadequate packing is ship-

pers responsibility. for Repair: All return items must be flushed 3 times with a neutral liquid prior to the return.

• Attach a tag identifying both the process fluid and the flushing liquid. • Any item received containing process fluid, will be disposed of at owners expense.

for Credit: Stocking distributors may request return of NEW and UNUSED equipment once per year, provided all items are packed in original shipping cartons. The value of return goods may not exceed 20% of distributor purchases of FPP Meter products over the previous 12 months, and the request must in-clude a new purchase order for other FPP Meter products with equal or greater value. Return ship-ment is subject to re-stocking charge = 20% on list price.

Claims: ● It is distributor responsibility to perform the initial investigation to determine cause and likely remedy. • Distributor must consult with TTS concerning claims, before ordering parts or incurring expenses. • TTS responsibility is limited to replacement parts, repair or refund - at TTS discretion. Please refer

to complete Warranty Statement on page 12. • Warranty claims must be submitted in the format of the FPP999 Warranty Claim Form.

Meter Testing: Standard test procedures for FPP meters are: TS Series Oval Gear, 1” & larger Hydrostatic & Accuracy* test (3 points) TN Series Nutating Disc Hydrostatic & Accuracy* test (2 points, Pass or Fail) TM Series Oval Gear, < 1” Functional test, Pass or Fail Test results are not supplied with the flow meter, as test fluid results rarely match actual operating fluid results.

Special Testing: ● Accuracy testing, additional points : $25 net per point • Testing over specified flow range (3 points) : $75 net per flow meter • Certified test certificate for Standard Test : $75 net per flow meter ($100 after shipment)

Non-Standard Test: $150 net per flow meter

Labor Charges: Non-standard flow meter assembly & electronics programming (new flow meters) Non-warranty service work and re-calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $75 net/hour

Field Service: Authorized distributors should have qualified technicians on staff to handle installation and start-up of flow meters and electronic registers. If it should become necessary to send factory personnel into the field, our activities are restricted to commissioning of equipment already installed (we cannot undertake to supervise piping & basic installation). Minimum charges for field service are travel, lodging & meal expenses + $500 net per day, including travel time. • A purchase order covering field service expenses is required prior to scheduling. • Please do not make field service commitments without prior consultation.

Instrument Tag: For a stainless steel tag with customer designated instrument number, add $25 NET per tag.


- 26 -

Meter Manuals: All flow meters are supplied with one manual, which is included in the shipping carton. Additional copies, and copies supplied in advance of meter shipment, are $5 NET each. When our WEB site is completed, manuals can be printed from there for free; in the meantime, manuals in PDF format may be requested via e-mail.

Assembly/Configuration (please specify in the order): Flow Meter : Left-to-Right is standard, Right-to-Left optional Strainer : Inlet from the front standard, rear inlet optional Strainer basket : 40 mesh standard with LV rotors, 100 mesh optional for gasoline, E85, alcohol & solvents; 20 mesh standard with HV rotors 1 Valve : Outlet towards the front standard, bottom, rear & top outlet optional. 2 Valves : Preset/Solenoid valve with outlet towards the front & Air Check valve with outlet to the right,; other combinations assembled upon request. Register : Mechanical : Calibration is defined in the P/No. Electronic : Please specify unit of calibration and decimal point to be programmed. Application Information (please include in the order): To ensure that flow meters are used only for acceptable operating conditions, we recommend that the following information be included in every order:

• Liquid to be metered • Minimum, normal & maximum flow rate • Normal & maximum operating pressure • Minimum, normal & maximum operating temperature • For higher viscosity liquids, also viscosity over full operating temperature range

Warranty

Tuthill Transfer Systems (“Manufacturer”) warrants to each buyer of its FPP Meters products (the “Buyer”) for a period of 12 months from date of invoice or sales receipt, but in no event more than 18 months from date of manufacture, that goods of its manufacture (“Goods”) will be free from defects of material and workmanship. Manufacturers sole obligation under the foregoing warranties will be limited to either, at Manufacturer’s option, replacing or repairing defective Goods (subject to limitations hereinafter provided) or refunding the purchase price for such Goods theretofore paid by the Buyer, and Buyer’s exclusive remedy for breach of any such warranties will be enforcement of such obligations of Manufacturer. If Manufacturer so requests the return of the Goods, the Goods will be redelivered to Manufacturer in accordance with Manufacturer’s instructions F.O.B. Factory. The remedies contained herein shall constitute the sole recourse of the Buyer against Manufacturer for breach of warranty. IN NO EVENT SHALL MANUFACTURER’S LIABILITY ON ANY

CLAIM FOR DAMAGES ARISING OUT OF THE MANUFACTURE SALE, DELIVERY OR USE OF THE GOODS EXCEED THE PURCHASE PRICE OF THE GOODS. The foregoing warranties will not extend to Goods subjected to misuse, neglect, accident or improper installation or maintenance, or which have been altered or repaired by anyone other than Manufacturer or its authorized representative. THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY, FITNESS FOR PURPOSE OF ANY OTHER TYPE, WHETHER EXPRESS OR IMPLIED. No person may vary the foregoing warranties and remedies except in writing signed by a duly authorized officer of Manufacturer. Warranties or remedies that differ from the foregoing shall not otherwise be binding on Manufacturer. The Buyer’s acceptance of delivery of the Goods constitutes acceptance of the foregoing warranties and remedies, and all conditions and limitations thereof.


us$, ex works mechanical & electronic tank truck flow meters

Documents