urraco 75 series - siebert & cian waste wood grades a1–a4 (german waste wood recycling and...
TRANSCRIPT
URRACO 75 SERIES Product presentation, v 1.0_2019
CONTENT
URRACO 75 SERIES3 |
n Urraco 75 Series at a glance
n Product positioning
n Applications
n Technical product details
n Machine overview
n Mobility
n Drive system
n Powerful Scania Diesel engine
n ABB electric drive
n Mobile hydraulics
n Automatic detection of non-shreddables
n 3-circuit cooling system
n Cutting system
n Hopper
n Material output
n Service & maintenance
n Optional features & add-ons
n Over-belt magnetic separator
n Fire extinguishing unit in the engine compartment
n Water sprinkling system
n Additional wear protection package cutting system
n Technical data
n Our customers
URRACO 75 SERIES AT A GLANCE
CHAPTER 1
COMPACT MOBILE SHREDDING
URRACO 75 SERIES5 |
URRACO 75 SERIES AT A GLANCE
n Powerful, extremely compact mobile twin-shaft shredder
n Ideal for the primary shredding of bulky waste and waste wood
n Adapts perfectly to the material thanks to shaft pairs available in different designs
n Customisable drive configurations with our SCANIA diesel or ABB electric motors
n Depending on your mobility needs, the machine is available in a hook-lift version or with a tracked chassis
FINE WASTE WOOD
URRACO 75 SERIES6 |
URRACO 75 SERIES AT A GLANCE: APPLICATIONS
n Waste wood grades A1–A4 (German waste wood recycling and disposal ordinance) for combustion purposes
n Specifications
Input material Waste wood (A1 – A3)
Input size < 2,000 mmBulk density approx. 200 – 300 kg/m³Moisture < 30%Output size 90 %< 200 mm
WASTE WOOD INPUT
WASTE WOOD OUTPUT
GARDEN WASTE
URRACO 75 SERIES7 |
URRACO 75 SERIES AT A GLANCE: APPLICATIONS
n Volume reduction of freshly cut, little or slightly lignified plant residues for better composting
n Specifications
Input material Garden waste
Input size < 2,000 mmBulk density approx. 300 – 350 kg/m³Moisture < 90%Output size 90 %< 250 mm
GARDEN WASTE INPUT
GARDEN WASTE OUTPUT
COARSE WASTE WOOD
URRACO 75 SERIES8 |
URRACO 75 SERIES AT A GLANCE: APPLICATIONS
n Waste wood grades A1–A4 (German waste wood recycling and disposal ordinance) for combustion purposes
n Specifications
Input material Waste wood (A1 – A4)
Input size < 2,000 mmBulk density approx. 200 – 300 kg/m³Moisture < 30%Output size 90%< 300 mm
WASTE WOOD INPUT
WASTE WOOD OUTPUT
WOODY ROOTS
URRACO 75 SERIES9 |
URRACO 75 SERIES AT A GLANCE: APPLICATIONS
n Primary shredding of roots for subsequent processing or combustion purposes
n Specifications
Input material Roots
Input size < 2,000 mmBulk density approx. 300 – 350 kg/m³Moisture < 30%Output size 90%< 300 mm
WOODY ROOTS INPUT
WODDY ROOTS OUTPUT
MSW & BULKY WASTE
URRACO 75 SERIES10 |
URRACO 75 SERIES AT A GLANCE: APPLICATIONS
n Primary shredding of waste from municipal and bulky waste collections for co-incineration or recycling
n Specifications
Input material MSW & bulky wasteInput size < 2,000 mmBulk density approx. 150 – 250 kg/m³Moisture < 30%Output size 90%< 300 mm
BULKY WASTE INPUT
BULKY WASTE OUTPUT
LIGHT SCRAP
URRACO 75 SERIES11 |
URRACO 75 SERIES AT A GLANCE: APPLICATIONS
n Light scrap shredding for subsequent sorting and material recovery
n Specifications
Input material Light scrap; diameter < 6 mmInput size < 2,000 mmBulk density approx. 400 – 500 kg/m³Moisture -Output size 90%< 300 mm
LIGHT SCRAP INPUT
LIGHT SCRAP OUTPUT
TECHNICALPRODUCT DETAILS
CHAPTER 2
FEATURES
URRACO 75 SERIES13 |
URRACO 75: MACHINE OVERVIEW
DOUBLE TILTING HOPPER SYSTEM
HYDRAULICS
3-CIRCUIT COOLING SYSTEM
DRIVE
OPERATION & HANDLING
CUTTING UNIT
MATERIAL OUTPUT
OPTIONAL FEATURES:
MAGNETIC FE-SEPARATOR
WATER SPRINKLINGSYSTEM
FIRE EXTINGUISHING SYSTEM
HARDFACINGSHAFTS
MOBILITY
OPERATION & HANDLING
URRACO 75 SERIES14 |
URRACO 75 SERIES: FEATURES
n User-friendly HMI Bosch-Rexroth controller with intuitive menu
n Convenient shredder operation from the wheel loader using our remote
n High uptimes thanks to our guided fault diagnosis functions
n Location-independent, fast software support thanks to our remote maintenance system with integrated GSM module
MOBILITY
URRACO 75 SERIES15 |
URRACO 75 SERIES: FEATURES
n Customisable to your mobility requirements thanks to different chassis designs
n Country-specific hook lift versions with optional wheel axle for easy transport and fast manoeuvring on-site
n Tracked, joystick-operated version with optional flat or rubberised track shoes for independent on-site transfer (diesel only)
DRIVE SYSTEM
URRACO 75 SERIES16 |
URRACO 75: MACHINE OVERVIEW
DIESEL ENGINE OR ELECTRIC MOTOR
HYDRAULIC PUMP
EXPANSION TANK
HYDRAULIC MOTORS
CUTTING UNIT
PLANETARY GEARBOX
6/2-WAY VALVES
POWERFULDIESEL ENGINE
URRACO 75 SERIES17 |
URRACO 75 SERIES: FEATURES
n High uptimes with our tried-and-tested SCANIA technology
n Environmentally friendly operation thanks to particulate filter and SCR exhaust cleaning system
n Low operating costs with our state-of-the-art engine technology
HIGH-PERFORMANCE ELECTRIC DRIVE
URRACO 75 SERIES18 |
URRACO 75 SERIES: FEATURES
n Highly efficient thanks to our tried-and-tested ABB electric motors
n Space-saving installation with no time-consuming cabling thanks to our integrated control cabinet
n Easy operation on more than one site with an optional plug&play connector
HIGHLY EFFICIENTMOBILE HYDRAULICS
URRACO 75 SERIES19 |
URRACO 75 SERIES: FEATURES
n Maximum efficiency at the perfect operating point with our electronic BODAS control system
n Up to 15% more throughput compared to standard hydraulic systems thanks to faster adaptation to current performance requirements
n Low diesel consumption due to consistent diesel motor load
n Adapts perfectly to input material thanks to pre-configured programs
0
20
40
60
80
100
120
140
Throughput Consumption
Standard hydraulics BODAS control system
+ 15% - 30%
AUTOMATIC DETECTION OF NON-SHREDDABLES
URRACO 75 SERIES20 |
URRACO 75 SERIES: FEATURES
n Securely powers down in the event of non-shreddables in the input material
n Shafts and drive unit protected by electronic system monitoring
n Easy removal of non-shreddables thanks to automated shaft release
3-CIRCUIT COOLING SYSTEM
URRACO 75 SERIES21 |
URRACO 75 SERIES: FEATURES
n Long service life thanks to the effective cooling of hydraulics, engine and charge air
n Clean operation in dusty environments thanks to self-cleaning Cleanfix reversible fan
CUTTING SYSTEM
TITLE OF THE PRESENTATION22 |
URRACO 75 SERIES: FEATURES
1. Cutters
2. Feed hooks
3. Cleaning teeth
4. Scrapers
5. Breaker bar
CUTTING SYSTEM WASTE WOOD FINE
URRACO 75 SERIES23 |
URRACO 75 SERIES: FEATURES
n Patented cutting system with a combination of cutting and crushing
n Cutting action for homogenous output
n Crushing action for fewer superfine particles
n High throughput thanks to an aggressive automatic intake
CUTTING SYSTEMWASTE WOOD ROUGH
URRACO 75 SERIES24 |
URRACO 75 SERIES: FEATURES
n Crushing action for coarse primary shredding of waste wood
n Undeterred by non-shreddables such as iron fittings, screws and bolts etc.
CUTTING SYSTEMC&I / MSW
URRACO 75 SERIES25 |
URRACO 75 SERIES: FEATURES
n Agressive material intake in both directions of rotation thanks to signature ripper combos
n Optimised geometry for automatic self-cleaning of the cutting unit
CUTTING SYSTEMLIGHT SCRAP
URRACO 75 SERIES26 |
URRACO 75 SERIES: FEATURES
n Optimised geometry in particularly robust design for shredding metal
n Reinforced cutter holders for harder materials such as sheet metal, aluminium profiles, cookware etc.
HOPPER
URRACO 75 SERIES27 |
URRACO 75 SERIES: FEATURES
n Easy feeding with our spacious, hydraulically operated double-tilting hopper system
n Continuous feeding thanks to a tilting angle of 80°
n Convenient remote shredder operation from the wheel loader
MATERIAL OUTPUT
URRACO 75 SERIES28 |
URRACO 75 SERIES: FEATURES
n Low dust emissions due to hydraulic height-adjustable conveyor belt, which can be even adjusted during operation
n Fast machine packing for storage or transport thanks to our hydraulically operated, fully retractable double folding conveyor
n Separate ferrous metals with optional over-belt magnet
n Long service life even with heavy materials such as scrap or industrial waste with our optional steel-reinforced conveyor belt
SERVICE & MAINTENANCE
URRACO 75 SERIES29 |
URRACO 75 SERIES: FEATURES
n Low downtimes thanks to sophisticated service functions
n No lengthy waiting times with our remote maintenance via integrated GSM module
n SCANIA engines for quick service availability worldwide
n Shaft exchange or hardfacing service by trained Lindner employees
OPTIONAL FEATURES & ADD-ONS
CHAPTER 3
OVER-BELT MAGNETIC SEPARATOR
URRACO 75 SERIES: OPTIONAL FEATURES
n Permanent over-belt magnet for ferrous metal separation
n Fitted above the conveyor belt
n Hydraulically height-adjustable
n Incl. discharge chute
URRACO 75 SERIES31 |
FIRE EXTINGUISHING UNIT IN THE ENGINE COMPARTMENT
URRACO 75 SERIES: OPTIONAL FEATURES
n For effective fire extinguishing in the engine compartment
n Releases cooling and suffocating foam
n Self-monitoring, no electricity needed
n Robust and maintenance-free thanks to galvanised, non-pressurised pipes
URRACO 75 SERIES32 |
WATER SPRINKLING SYSTEM
URRACO 75 SERIES: OPTIONAL FEATURES
n To remove dust from the filling and discharge areas
n 4 pcs. spray nozzles positioned in the suction hood
n 2 pcs. spray nozzles positioned in the output area
n Incl. water filter and pressure limiter
n Switch it ON/OFF using the control panel
URRACO 75 SERIES33 |
ADDITIONAL WEAR PROTECTION PACKAGECUTTING SYSTEM
URRACO 75 SERIES: OPTIONAL FEATURES
n Ideal for shredding particularly abrasive material
n Cutter hardfacing (type HW)
n Scraper hardfacing (type HW)
n Support wire made of cobalt hard alloy
URRACO 75 SERIES34 |
TECHNICAL DATA
CHAPTER 4
URRACO 75 SERIES
URRACO 75 SERIES36 |
TECHNICAL DATA
OUR CUSTOMERSURRACO 75 SERIES
WE ARE PROUD TO WORK WITH:
URRACO 75 SERIES
URRACO 75 SERIES38 |