WELCOME TO ORAL PRESENTATION FOR

CAREER of ENGR. MD. MAMUNUR RASHID,

Life Fellow of IEB-7645

Personal Information

Date of Birth November 01, 1970 Place of Birth Dinajpur, Bangladesh Nationality Bangladeshi

Present Resident in Japan

Language Bangla, English Marital Status Married

My 15 years Career:

Around 7 years in Jamuna Fertilizer Company Limited of BCIC as a Mechanical Engineer since May 31,1997 to February 15,2004.

Around 8 years in Bangladesh Institute of Management as a Management Counsellor since February 16,2004 to till date.

Introduction

I would like to give thanks to the ‘BPERB’ for calling me for interview.

I also pay respects and thanks to my Assessors. I am a Mechanical Engineer, I obtained my engineering degree from

RUET (former BIT Rajshahi) in 1993. At present, I am doing PhD in Manufacturing Engineering at Kitami

Institute of Technology in Japan from Bangladesh Institute of Management (BIM) ,Dhaka, Bangladesh since January 2010.

My Career in Brief: Education

SSC (Science) 1985-1st Division, Rajshahi. HSC (Science) 1987-1st Division, Rajshahi. B.Sc in Mechanical Engineering 1993 with 1st class from RUET (former BIT,

Rajshahi). M.Sc in Mechanical Engineering 1996 from BUET, Dhaka. MBA 2004 from BOU, Gazipur. Diploma in Computer Science and Application

2006 from BOU, Gazipur. PGD in HRM 2007 from Institute of Personnel

Management (IPM), Dhaka. PGD in Marketing Management 2008 from Bangladesh Institute of

Management (BIM), Dhaka.

My Career in Brief: Foreign Training

Successfully completed training course on “Mechatronics Systems Technology” Conducted by Nanyang Polytechnic, Singapore, from14 October-1 November, 2002.jointly sponsored by the Ministry of Foreign Affairs, Singapore and Japan International Cooperation Agency.

Actively participated and presented a technical paper as an international delegate at the “8th National Convention & FEISCA Regional Meet on Engineers’ in Social Transformation of Nepal Engineers’ Association (NEA)”, held at Kathmandu, capital of Nepal, during April 3-5,2003.

Successfully completed training course on “Total Quality Management and ISO9000/14000 & QS9000” Conducted by National Institute of Small Industry Extension Training (nisiet) , from11 October-03 December, 2004. Sponsored by the Ministry of External Affairs, India under ITEC programme.

Actively participated represented of Bangladesh as absent of President of IEB, and presented an innovative management paper as an international delegate at the “21st

Indian Engineering Congress”, held at Guwahati, Capital of Assam state, India, during December 22-24, 2006.

My Career in Brief: Local Training Successfully completed the training course on “Preventive

Maintenance” of two weeks in Training Institute for Chemical Industries, Polash, Narsingdi, Bangladesh, February 14-26, 1998.

Successfully completed the training course on “Control Valve and Their Application in Industrial Process Control” of two weeks in Training Institute for Chemical Industries, Polash, Narsingdi, Bangladesh, October 4-15,1998.

Successfully completed the Workshop on “Parallel Thinking Method and Forth Generation Time Management System” organized by the Institution of Engineers, Bangladesh held at Tarakandi, Jamalpur from of 2 June 1999.

Successfully completed the training course on “Vibration Monitoring & Data Acquisition Instrumentation” of two weeks in Training Institute for Chemical Industries, Polash, Narsingdi, Bangladesh, April 01-12, 2001.

My Career in Brief: Local Training (Cont’d)

Successfully completed the training course on “Computer Hardware Maintenance & Trouble Shooting” of one week in M/S Daffodils Computers, 64/3, Lake Circus, Kalabagan (2nd-4th floor). Mirpur Road, Dhaka-1216, Bangladesh, May 12-17, 2001.

A short course on “Design and Analysis of Heat Exchangers for Process and Power Industries” December 29-30, 2001 organized by BSME-ASME at Dhaka, Bangladesh.

Attended a Seminar on “Pollution Control Technology and Energy Saving” organized by the Institution of Engineers, Bangladesh held at Tarakandi, Jamalpur from 23rd October, 2003.

My Career in Brief: Local Training (Cont’d)

Satisfactorily completed the course on “Training of Trainers” of two weeks in Bangladesh Institute of Management, 4 Sobhanbag, Mirpur Road, Dhaka-1207, Bangladesh, from January 20-31,2004.

Satisfactorily completed the training course on “Project Appraisal and Evaluation” of two weeks in Bangladesh Institute of Management, 4 Sobhanbag, Mirpur Road, Dhaka-1207, Bangladesh, February 22-March 4,2004.

My Career in Brief: Local Training (Cont’d)

Satisfactorily completed the training course on “Project Management” of three weeks in Bangladesh Institute of Management, 4 Sobhanbag, Mirpur Road, Dhaka-1207, Bangladesh, May16-June3,2004.

Satisfactorily completed the training course on “Motivation for Improvement of Quality and Productivity” of 2 days in Bangladesh AOTS Alumni Society (BAAS), Room No. 31-32, 7th floor, Eastern Plaza, Sonargaon Road, Hatirpool, Dhaka-1205.2-3 October,2004.

Satisfactorily completed the training course on “Implementation of Management standards in the Organization ISO 9001, ISO 14001, OHSAS 18001 and SA8000” Jointly organized by Indian Register Quality Systems , A department of Indian Register of Shipping and ZR Professionals Bangladesh Limited, held at Dhaka, Bangladesh on 4th July,2004.

My Career in Brief: Local Training (Cont’d)

Satisfactorily completed the training course on “Research Methodology with the Application of SPSS/WINDOWS” of two weeks in Bangladesh Institute of Management, 4 Sobhanbag, Mirpur Road, Dhaka-1207, Bangladesh, May23-June2,2005.

Satisfactorily completed the training course on “General English” between the dates November 11,2007 to January 08,2008, in British Council, Bangladesh .

Satisfactorily completed the training course on “Competency based Training System for TVET” for NPDP of 5 days on three weeks in ILO-GOB-EC, Bangladesh, May-June, 2009.

My Career in Brief: List of Proceedings

publication

M.M. Rashid, M. H. Kabir and M. N. Islam, A Study on the Use of Rice Bran Oil and Vegetable Oils as Renewable Sources of Energy and Alternative Fuel for Lighting Purposes. Proceedings of the Sixth Annual Paper Meeting and the First International Conference on Mechanical Engineering, February 18-20, 2000, Dhaka-1000, Bangladesh; Paper No-4, pp. 22-29.

M.M. Rashid and J.A. Naser, Computational Fluid Dynamics For Newtonian Fluid Flow Through Concentric Annuli With Center Body Rotation, Proceedings of the Fourth International Conference on Mechanical Engineering, December,26-28, 2001, Dhaka, Bangladesh, Volume-II, Section –IV (Fluid Mechanics), pp. 119-123 .

M.M. Rashid and J.A. Naser, Non-Newtonian Fluid Flow Through Concentric Annuli, Proceedings of the First BSME-ASME International Conference on Thermal Engineering, 31 December, 2001-2 January 2002, Dhaka, Bangladesh; pp. S46-S51.

My Career in Brief: List of Proceedings publication

(Cont’d)

M.M. Rashid, Numerical Simulation - A Modern Concept of Chemical Industries, In the Proceedings of the 1st Annual Paper Meet and International Conference on Chemical Engineering, February 12, 2002, IEB Chandpur, Bangladesh , Paper No-7, pp.72-77.

M.M. Rashid, Engineering Functions in the 21st Century, Proceedings of the First Annual Paper Meeting and the First International Conference on Electrical Engineering,February 9, 2002, Rajshahi, Bangladesh, pp. 171-175.

M . Manaf. And M.M. Rashid , Technical Challenge about Woodward Governor’s Trouble Shooting and Rectification in Jamuna Fertilizer Company Limited. Proceedings of the Seventh Annual Paper Meeting and the Second International Conference on Mechanical Engineering, February15, 2002, IEB, Chittagong, Bangladesh, Paper No.26, pp. 206-211.

M.M. Rashid, Md Ayan Reza, Dewan al-Mamun, Effat Chowdhury Tonny , Safia Habib and Rumana Rahman, Technology for Disable People Achieves Millennium Development Goals: Bangladesh Perspectives, Proceedings of the Twenty-first Indian Engineering Congress, December 22-24, 2006, Guwahati, Assam,India, pp.315-318.

My Career in Brief: List of Proceedings publication (Cont’d) M. Manaf and M.M. Rashid , A process upgrading of urea synthesis and high

pressure recovery section by reducing pressure from high pressure loop, Proceedings of the national paper meeting on fertilizer sector, IEB, Rangadia, Chittagong, Bangladesh, July 09, 2004, Paper No 1B, pp. 68-72.

M.M. Rashid and Dr. Md Ashraful Islam, A Technical Proposal on Analyzing Management Information Systems of the Jamuna Fertilizer Company Limited: A case Study, Proceedings of the national paper meet on fertilizer sector at IEB Rangadia, Chittagong, Bangladesh, July 09,2004, Paper No 1A, pp. 73-79.

M.M. Rashid, Innovation of Programming Keyboard in Jamuna Fertilizer Company Limited, Proceedings of the Eighth Annual Paper Meeting and the Third International Conference on Mechanical Engineering, March 20-22, 2003, IEB, Ramna, Dhaka-1000, Bangladesh; Abstract No.60.

Rashid, M.M (2010), A Simulating functional and dysfunctional answer from given Kano evaluation for Product Development, Proceedings of 1st International Conference on Mechanical, Industrial and Energy Engineering 2010, 23-24, December, 2010, Khulna, Bangladesh, paper No. MIE10-040, pp.1-6.

My Career in Brief: LIST OF JOURNAL PUBLICATION

Rashid, M.M. Ullah, A.M.M.S., Tamaki, J. and Kubo, A (2010). A Kano Model based Computer System for Respondents determination: Customer Needs Analysis for Product development Aspects, Management Science and Engineering, Vol.4 (4), pp.70-74. 2010, (Canada); Retrieve from http://www.cscanada.net/index.php/mse/article/view/1359/1378/pdf

Rashid, M.M. Ullah, A.M.M.S., Tamaki, J. and Kubo, A (2010). A proposed computer system on Kano Model for new product development and innovation aspect: A case study is conducted by an attractive attribute of automobile, International Journal of Engineering, Science & Technology, Vol.2(9),pp.1-12, 2010 (Nigeria); Retrieve from http://www.ijest-ng.com/vol2_no9/

Rashid, M.M. (2010). A review of state-of –Art on Kano Model for Research Direction , International Journal of Engineering, Science and Technology, Vol.2(12), pp.7481-7490, 2010, (India) ; Retrieve from http://www.ijest.info/docs/IJEST10-02-12-089.pdf

My Career in Brief: LIST OF JOURNAL PUBLICATION

(Cont’d) Rashid, M.M. Ullah, A.M.M.S., Tamaki, J. and Kubo, A (2011). A Numerical Kano

Model for compliance customer needs with product development, Industrial Engineering and Management System. Vol. 10 (2), pp140-153, 2011, (Korea); Retrieve from http://www.kiie.org/iems/contents/vol10no2/10-2-08.pdf

Rashid, M.M. Ullah, A.M.M.S., Tamaki, J. and Kubo, A (2011). A Kano Model Based Linguistic Application for Customer Needs Analysis, International Journal of Engineering Business Management, Vol.3 (2) pp29-36,2011, (Croatia); Retrieve from http://www.intechopen.com/articles/show/title/a-kano-model-based-linguistic-application-for-customer-needs-analysis

Rashid, M.M. Ullah, A.M.M.S., Tamaki, J. and Kubo, A (2011). Evaluation of Hard Materials using Eco-Attribute, Advanced Material Research Vol.325, pp693-698,2011, (Switzerland) ; Retrieve from http://www.scientific.net/AMR.325.693

My Career in Brief: LIST OF JOURNAL PUBLICATION

(Cont’d) Rashid, M.M. (2011). Management Information System of Jamuna Fertilizer

Company Limited: A Case Study, International Business and Management, Vol.3 (1),pp118-124, 2011, (Canada) ; Retrieve from http://www.cscanada.net/index.php/ibm/article/view/j.ibm.1923847920110201.038/1824/pdf

Rashid, M.M. (2011). Management of Renewable Sources of Energy: A Case on Rice Bran oil and Vegetable oils of Bangladesh Perspective, Energy Science and Technology, Vol.2(1) pp62-67 2011 (Canada); Retrieve from http://www.cscanada.net/index.php/est/article/view/j.est.1923847920110201.729/pdf

My Career in Brief: LIST OF JOURNAL PUBLICATION (Cont’d)

Rashid, M.M (2011), CFD for non-newtonian CMC fluid flow through concentric annuli with centre body rotation, International Journal on Science and Technology, ISSN:2229-7677, Vol. 2(3):121-126 (India); Retrieve from http://www.ijsat.in; password :MDMIIIII4

Rashid, M.M. and Manaf, M.A (2011), Woodward Governor’s Trouble shooting and Rectification: A Case on Jamuna Fertilizer Company perspective, Bangladesh Research Publications Journal, ISSN:1998-2003, Vol.5(4), pp381-386. July-August,2011 (Bangladesh); Retrieve from http://www.bdresearchpublications.com/admin/journal/upload/09246/09246.pdf

My Career in Brief: LIST OF JOURNAL

PUBLICATION(Cont’d)   Rashid, M.M and Manaf, M.A (2011), Process upgrading of urea

synthesis: A Case on Jamuna Fertilizer Company Perspective, Bangladesh Research Publications Journal, ISSN: 1998-2003,Vol.6(1): September -October,2011 (Bangladesh); Retrieve from http://www.bdresearchpublications.com/admin/journal/upload/

Rashid, M.M. (2011). Technology for Disable People: A thinking for Bangladesh Perspective, Bangladesh Research Publications Journal, ISSN: 1998-2003,Vol.6(2): 252-256, November-December,2011 (Bangladesh); Retrieve from http://www.bdresearchpublications.com/admin/journal/upload/

Rashid, M.M (2011), Engineering Functions for Bangladesh Socio-Economic Development Aspects, International Journal of Business and Management Tomorrow, Vol. 1(1) :1-11; (India); Retrieve from http://www.ijbmt.com/issue/35.pdf

My Career in Brief: LIST OF JOURNAL

PUBLICATION(Cont’d)   Rashid, M.M (2012), Computational Fluid Dynamics (CFD) for Chemical Industries, International

Journal of Advances in Engineering, Science and Technology,Vol.1(2): 252-256 (India) ; http://www.ijaest.com/

Ullah, A.M.M.S., Rashid, M.M. and Tamaki, J. (2012). On Some Unique Features of C-K Theory of Design, CIRP Journal of Manufacturing Science and Technology, Vol.5 , No. 1:55-66, 2012, [Publisher: Elsevier Science]; (France); Retrieve from http://www.sciencedirect.com

Rashid, M.M (2012), CFD for Newtonian Glucose fluid flow through concentric annuli with centre body rotation , International Journal on Science and Technology,ISSN:2229- 7677, Vol. 3(1) (in-print) (India); Retrieve from http://www.ijsat.in

Rashid, M.M (2012), Proposed Research Direction for Sustainable SMEs in Bangladesh, Bangladesh Research Publications Journal, ISSN: 1998-2003,Vol.6(3): 317-329, January–February ,2012 (Bangladesh); Retrieve from http://www.bdresearchpublications.com/admin/journal/upload/09290/09290.pdf

ATTENDED VARIOUS SEMINAR AND WORKSHOPS Attended a seminar on “Quality Control Implementation in

Construction Industries” Organized by Engineering Staff College, IEB, Ramna, Dhaka dated 13 April,2004.

Attended a seminar on “Psychosocial counseling” organized by Ain O Salish kendra (ASK) and Bangladesh Institute of Management (BIM), held on 26 June ,2004,2004 at BIM, Dhaka Campus.

Attended a seminar on “Safe Building and Bangladesh National Building Code” organized by Dhaka Centre of the Institution of Engineers, Bangladesh (IEB), held on Saturday, 7 May 2005, at IEB Head quarters, Ramna, Dhaka.

Attended a seminar on “Prospect and problem of Small Medium Enterprises (SME) of Bangladesh” organized by Mechanical Engineering Division of of the Institution of Engineers, Bangladesh (IEB), held on Monday, 27 June 2005, at IEB Head quarters, Ramna, Dhaka.

ATTENDED VARIOUS SEMINAR AND WORKSHOPS (Cont’d)

Actively participated a Seminar on “The Second Annual Paper Meet (APM’95)” in Rajshahi, September 28-30,1995, organized by Mechanical Engineering Division, The Institution of Engineers Bangladesh (IEB), HQ, Ramna, Dhaka-1000, hosted by IEB Rajshahi Centre, Bangladesh.

Attended a Seminar on “Optimal Energy Utilization with Vapor Absorption Chillers” held at BUET, Dhaka, October 8, 1998, Organized by the Centre for Energy studies, Bangladesh University of Engineering and Technology, (BUET), Dhaka, Bangladesh.

Attended a Seminar on “The Need For Rethinking About Our Thinking System, parallel thinking method and Fourth Generation Time Management System” held at Jamuna Fertilizer Co. Ltd., Tarakandi, Jamalpur, Bangladesh Organized by EPSSW, IEB, Headquarters, Ramna, Dhaka-1000 and IEB Tarakandi Sub-Centre on June 02,1999.

ATTENDED VARIOUS SEMINAR AND WORKSHOPS (Cont’d)

Actively participated and presented a paper on “45th IEB Annual Convention and Technical Session of Mechanical Engineering” in Khulna, February17-19, 2000, organizd by IEB Khulna Centre, Bangladesh.

Actively participated and presented a paper on “National Paper Meet on Fertilizer and Chemical Sector” in Rangadia, September 1, 2001, organized by IEB Rangadia, Centre Chittagong, Bangladesh.

Actively participated and presented a paper on “The First Annual Paper Meet and International Conference on Agricultural Engineering ” in Mymensingh, October 20, 2001, jointly organized by Agricultural Engineering Division, The Institution of Engineers Bangladesh (IEB) and Federation of Engineering institutions of South and Central Asia (FEISCA), hosted by IEB Mymensingh Centre, Bangladesh.

ATTENDED VARIOUS SEMINAR AND WORKSHOPS (Cont’d)

Successfully attended the a seminar on “ Pollution Control Technology and Energy Saving” held at Jamuna Fertilizer Co. Ltd., Tarakandi, Jamalpur, Bangladesh Organized by IEB, Headquarters, Ramna, Dhaka-1000 and IEB Tarakandi Sub-Centre on 23rd October,1999.

Actively participated and attended on “the 48th IEB Annual Convention of the Institution of Engineers, Bangladesh and National Seminar on Poverty Reduction is the Global Challenge” held at Dhaka, from January 20-22, 2004, organized by IEB Dhaka Centre, Bangladesh.

Attended a seminar on “ Telecommunication for Disaster Management” organized by Electrical Engineering Division of the Institution of Engineers, Bangladesh (IEB), held on Tuesday, 9 March 2004, at IEB Head quarters, Ramna, Dhaka.

List of Research Work in BIM

Safety compliance in readymade garments Industry: A Case study on TNZ apparels Ltd.

Compliance through ISO9001:2000 in Stamford university A study on difference of life style & health knowledge

between urban and rural male college students A study on perception of mothers of 05 years children

toward Polio-free Bangladesh drive in a selected village.

List of Research Work in BIM (Cont’d)

Compliance issues in readymade garments Industry Study on factors related with drug addiction among the

patients threaten in a private clinic, Dhaka. Quality control can ensure safety drinking water on context

Dhaka WASA. Safety health & welfare at Garment sector in Bangladesh

List of Research Work in BIM (Cont’d)

Human resources Practices Karstadtquella International Study on Bangladesh Laws-2006 Industrial relations between employee and employer of

Padma Poly cotton Knit fabrics Ltd Role of Total Quality Management in Human Resource

Management Occupational health & Safety benefit & welfare hazardous

problem & Prospect in tannery sector in Bangladesh

List of Research Work in BIM (Cont’d)

Occupational health & Safety benefit & welfare hazardous problem & Prospect in tannery sector in Bangladesh

Human Resources Practices in Manarat International University The role of information technology in human resources : A case

study on HUAWEI Technologies (BD) Ltd Social compliance status in Readymade garments Sector for

employees Perspective: A case study on Venix Bangladesh Ltd. Compliance system of Fakir Knitwears Ltd: A Case Study A report on collection and selection of worker’s health security in

Garments Industries in Bangladesh. A study on Personnel Management in Bangladesh Recruitment and selection Process of PROSHIKA

List of Research Work in BIM (Cont’d)

HR Practice in Interstoff Clothing Ltd Performance appraisal system of human resources of

Popular Life Insurance Co. Ltd. A study on quality of education between public and private

universities in Bangladesh A Study on Sickness of Small and Medium enterprise in

Bangladesh during 2000 to 2005 : HRM Perspective

List of Research Work in BIM (Cont’d)

Recruitment , Selection & Training Procedure of Milton trading International: A Garments Industry under labour law Act 2006 of Bangladesh

Recruitment and selection Process Causes of Company Bankruptcy of Bangladesh Shilpa Bank Perspective: 1980-2006

Alternative dispute resolution Project to dev HR through Shushilon

Job satisfaction of the employee of Golden Son Ltd.

List of Research Work in BIM (Cont’d)

Training dev. Program of Cogito Marketing Solution Ltd HR training and development program of Grameen Phone

Ltd. Sales forecasting in Cement Industry in Bangladesh: Study

on Seven Ring Brand Cement Performance appraisal system of ICDDRB Performance appraisal system: A case study of Distribution

Deptt. Of Incepta Pharmaceuticals Performance appraisal system : A Comparative study among

three organizations

My Career in Brief: Name of Training Program Conducted in

BIM Productivity and Competitiveness Productivity Improvement Techniques Project Management Critical Path Method using MS Project 2003 Productivity and Competitiveness Certificate Course on computer Aided Project Management Certificate Course on Total Quality Control Through ISO 9001:2000 (TQM) Computer Aided Project Management using MS Project 2007 Certificate Course on Total Quality Control Through ISO 9001:2008 (QMS) Instructional Techniques for Faculty of Aeronautical Institute of Bangladesh

My Career in Brief: List of Subjects are Taught in BIM

Safety Health and Welfare Applied Statistics Production and Operation Management

My Career in Brief: List of Professional Organization

Linking as a Member

The Institution of Engineers, Bangladesh Bangladesh Society of Mechanical Engineers Bangladesh Computer Society Institute of Personnel Management Bangladesh Society of Training and Development Japanese Society of Precision Engineering

My career in Brief: List of University, where I taught as

an adjunct faculty BUBT IBAIS DIU: Dhaka International University BOU DIU: Darul Ihsan University BUET ( Teaching Assistance and Guest Speaker)

My Career in Brief: Scholarships and Awards

1983-1984 Junior School Examination Merit ScholarshipKhansama, Dinajpur, BangladeshGovernment of the People’s Republic of Bangladesh

1985-1987 Secondary School Examination Merit ScholarshipDinajpur, BangladeshRajshahi Education Board, Rajshahi, Bangladesh

1988-1993 Higher Secondary School Examination Merit scholarshipRajshahi Education Board, Rajshahi, Bangladesh

November1994-May1996 National Science & Technology FellowshipMinistry of Science & TechnologyGovernment of the People’s Republic of Bangladesh

My Career in Brief: List of Organization as an Enlisted

Consultant

BGMEA for Curriculum development ILO for TVET Project

Now I am demonstrating ‘The Core Training Objectives’:-

1. PERSONAl 1.1 To meet the global environment/challenge:

I am regular studying from Daily News PapersDifferent online JournalsEngineering News of IEB

1.2 Communication with others in a work situation

Prior to start any Job: I consult withmy supervisorColleaguesGuest SpeakerProspect Participants

Moreover , after completing a Job/training/consultancy

I maintain the record of the done Job.

1.3 Team Work and Contribution

In Jamuna Fertilizer Company Limited: I have managed and supervised a group of technician.

In BIM: I have managed and coordinated multi discipline people in training room.

In Japan: I am doing PhD work with a group people in the laboratory.

1.4 Commitment to ProfessionI am a

Life fellow of IEB (F-7645) Member of BSME(M-02-28ME) Life member of BSTD (M-54) Life member of IPM Member of BCS (M-675)

Moreover, I held the following position: Local council member (2000-2004) of Tarakandi sub centre Joint secretary (2000-2004) of BCIC Engineers Association at JFCL

branch. Member of MED,IEB (2009-2010)

Beside, I have presented several number of papers at conferences and published 17 papers in Journal, most of the papers are my working/job evidence.

1.5 Code of Ethics

I am aware and respect of 13 points code of ethics of IEB. I have followed the rules and regulations as a presiding

officer of national election to parliament of Bangladesh of 2001.

2. Engineering2.1 Engineering Procedure

In this regards, I have published 17 journal papers to demonstrate a knowledge and understanding of engineering procedures including planning, programming, progressing the implementation process.

2.2 Engineering Problems

In JFCl, Process upgrading of Urea synthesis loop of JFCL MIS system of JFCL Rectification of WOODWARD Governor.

In Japan, Virtual customer needs analysis system

2.3 Solution of Engineering Problems

I have solved many engineering problems, as follows: To solve any adjustment, calibrating, setting and trouble

shooting regarding turbine control system. To rectification works of any trouble of WOODWARD

Governor. To solve a problem of programming keyboard of urea

weighing machine. To develop a computer system to analysis customer needs.

2.4 Management and Leadership I have attended the following activities as a supervisor in JFCL to

demonstrate engineering management and leadership: Valve maintenance Welding Heat exchanger repairing Refractory and insulation Precision and general fabrication Modification work Flange facing Turn around/overhauling

2.4 Management and Leadership(Cont’d)

Moreover, following jobs were done at JFCL: To ensure economic and safe operation of the assigned plant. To ensure the production through efficiently, timely, safely. To suggest changing of the working conditions and use of

equipments to increase efficiency of the plants.

3. Management and Economics3.1 Contractual FormIn JFCL for overhaul maintenance work, I attended meeting regularly with the contractor’s (CNCC)

senior staff , where contractual issues were discussed and solved within time and budget.

My detailed knowledge of the maintenance work, I would advised the contractor’s of my decision , they could

make any amendments to the drawings. Hence, many contractual issues were solved.

3.2 Project Management In JFCL,

To ensure the assigned plant for the continuous and safe operations .

To ensure the proper implementation of higher authority’s instruction for optimum operating conditions.

In BIM, I have coordinated many training programs as a coordinator of

the training program. I have taught project management with MS project software in

connection with real life situations.

3.3 MIS system

In JFCL, A proposed planning of real MIS system in JFCL has published

in Journal .

Moreover in BIM, I have taught the MIS system/ERP , how to planning, implement in any organizations to ensure transfer of information in the work place situation.

3.4 Financial Knowledge

In JFCL,I have gathered a knowledge and understanding of how work

is financed and how funds are obtained and managed. I have prepared yearly budget both for capital and

consumables.Within the budget provision, I have prepared both foreign

and local purchase requisition .

3.5 Standards and Codes

In JFCL, after study I have designed and fabricated a tabular heat exchanger of 140 sq. meter under ASME code , section-V, Div-I.

In BIM, In my coordination,I have taught ISO9001:2008 for creating international

standards quality management system

3.6 Quality PlansIn JFCL, I have consulted with my supervisor to some extent with my

technicians. I have reviewed al the aspects relating to tools, equipments

and safety measures. A schedule was prepared consciously , which all party follow

strictly.In BIM, I have taught Quality management System ( 9001:2008) ,

safety, health and welfare and TQM on the training program.

3.7 Quality Assurance

In JFCL, After procurement, I have checked the quality of procured of

materials and certify for acceptance or not acceptance. Once, in my notice was come, some spares of Scraping

Reclaimer was undersized: Supplier endorsed it and requested me to take corrective

measure within our capacity at their cost. We have corrected those within acceptable range in our

workshop.

3.8 Effective Uses of Resources

In JFCL, in my leadership, using ‘fives Ms’-Men, method, Materials, Machines and Money are contributed to achieve the financial performance.

In BIM, in my coordination, I have taught the following training program to achieve competitiveness in the global market: Productivity Improvement Techniques Productivity and Competiveness TQM and ISO 9001:2008

4. Environment, Health and Safety4.1 EIA: Environmental Impact Assessment In JFCL, I have served as an incorporating environment and in

decision making for public interest and factors according to the rules , called environment conservation,1997: To inspect JFCL for controlling environmental pollution. To monitor and supervise proper implementation of national a

forestation program in JFCL on regular basis. I have worked to run the plant properly for maintenance of

waste treatment plant.

4.2 Safety in the work situationIn JFCL, I have taken responsibility for personal and collective safety

in work situation. I was instrumental in introducing a scheme to recognize

teams that had good safety records. It has created a growing awareness of dangers in the workplaces and has reduced the company’s accident record significantly.

In BIM, I am paper leader of safety , health and welfare for

PGDHRM/PGDPM

4.3 Engineering Solutions

I have published four papers regarding engineering solutions of JFCL in compliance with relevant regulations and best practice concerning health, safety and risk .

4.4 Manage and apply safe system

I have manage and applied safe systems in JFCL to follow rules and regulations of JFCL.