untitled - deluce lighting

INTRODUCTION
Déluce Lighting products are distributed World wide, and due to our commitment to innovative design and quality we have appreciated continual annual growth.
The aim is to ensure we are in constant touch with the latest developments in lighting technologies, providing a product excellence, reliability and customer service that is second to none.
Our promise is to offer only the highest standards in quality and design to ensure we meet all our customers’ requirements and offer the best advice and technical support available.
The design office is run by a helpful team dedicated to researching innovative solutions, each project being developed with meticulous care thanks to latest technological resources available.
Holding over £2M of finished stock, the breadth of our range including solutions for Domestic, Commercial and Industrial applications offers individualism for every customers requirements.
Déluce lighting is here to help and to ensure we truly are:
lighting your world
Products offered for sale may differ from those described in this catalogue due to later production changes in specification, components or place of manufacture.
Our policy is one of constant development and improvement. Whilst every effort is made to make the catalogue accurate at the date of printing, specification and/or appearance may be changed in the interest of continuing improvement.
Déluce Lighting would like to acknowledge the help and support of its staff, customers and suppliers in providing information towards the publication of this catalogue.
© 2009 Déluce Lighting
91
25 2826 29 30 31 32 34
42
38
90 91
Déluce Lighting is dedicated to bringing to you the latest designs and technologies. Always striving to ensure that the most superior energy efficient products are offered with the widest range of solutions.
In this latest addition of the Déluce catalogue you will find many new products and we would like to bring to your attention: -
• The new MEA school luminaire on page 31
• The new LED section starting from page 270
• The extended floodlight range on pages 326 & 329
• The introduction of our new street light luminaires from page 441
We hope you find all these new products of interest and look forward to working with you to implement these great new fixtures on your next project.
Full lighting design service available. Please contact our technical team for more information.
CONTENTS
247245243 246
CONTENTS
Product Voltage
Class I - Electrically insulated and provided with terminal for earth connection
Class II - Double insulated, complies with BS EN 60598
Class III - Suitable for low voltage and complies with BS EN 60598
Suitable for installation on normally flammable surfaces
Equipment suitable for direct mounting on or in cabinets or furniture
Conforms with all applicable EC directives
Short circuit proof
Product can be used in closed fixtures
Product complies with the Restriction of Hazardous Substances Directive
Safety Extra Low Voltage
Distance from wall or fixture
Technopolymer resistant against the 850°C glow wire test
Graphical Lamp representations for each product
Indicates the product is IP66 rated
Do not dispose of product in general waste. Only discard in separate collection schemes, which cater for the recovery and recycling of materials contained within
Emergency fitting, or is available as an emergency fitting on request
Ingress Protection Rating (IP)
2 Protection against ingress of medium sized solid foreign bodies.
3 Protection against ingress of small solid foreign bodies greater in thickness than 2.5mm.
4 Protection against ingress of small solid foreign bodies greater in thickness than 1mm.
5 Protection against ingress of dust in an amount sufficient to interfere with the satisfactory operation of enclosed equipment.
6 Complete protection against ingress of dust.
Second Numeral
1 Protection against drops of condensed water.
2 Protection against drops of liquid falling at any angle up to 15° from the vertical.
3 Protection against rain falling at any angle up to 60° from the vertical.
4 Protection against splashing. Liquid splashed from any direction shall have no harmful effect.
5 Protection against water jets
projected by nozzle from any direction.
6 Protection against condition on ship decks.
7 Protection against immersion in water.
8 Protection against indefinite immersion in water (depth to be confirmed).
IP 65
Page 6
MARKETING AIDS
Déluce Lighting can provide a range of marketing aids and tools and have exhibited at a number of lighting shows and events throughout the UK.
If you wish to take advantage of any of these services or if you have any special requirements please feel free to contact our support team.
Déluce exhibition stand
Déluce Guardian display stand
Déluce Spettro display stand
Déluce Verdi display box
DÉLUCE LIGHTING CATALOGUE
S15s
DÉLUCE LIGHTING CATALOGUE
RECESSED MOUNT T5 LUMINAIRES
INDIRECT/DIRECT RECESSED T5 & TC-L/PLL FLUORESCENT MODULAR FITTINGS
INDIRECT/DIRECT RECESSED TC-L/PLL FLUORESCENT MODULAR FITTINGS
INDIRECT/DIRECT RECESSED TC-L/T5 FLUORESCENT MODULAR FITTINGS
INDIRECT/DIRECT RECESSED TC-L/PLL FLUORESCENT MODULAR FITTINGS
INDIRECT/DIRECT RECESSED LG7 T5 FLUORESCENT MODULAR FITTINGS
INDIRECT/DIRECT RECESSED T5 & TC-L/PLL DECOR FLUORESCENT MODULAR FITTINGS
INTUMESCENT FIRE TENTS
14
15
16
18
19
20
22
24
25
28
26
29
3021
IP65 SURFACED MOUNT T5 LUMINAIRES
THE SCUDO RANGE
THE SAN RANGE
31
32
34
38
42
43
50
55
TERMINAL BLOCK
The Déluce Lighting range of quality fittings is flexible and universal, with a choice of louvres, diffusers, wall wash, indirect/direct options and lamps. All are designed for mounting into ceiling grids with a T-bar system (see specifications for all dimensions available). They are suitable for a wide range of applications for retail, commercial, and industrial use; especially offices, classrooms, banks and hospitals. Emergency versions are available on request.
Each lighting base unit is manufactured from sheet steel, which is powder coated in white (see RAL colour for each option). The louvres or diffusers provide superior glare control and high visual comfort, options are available for the elimination of fixture glare on computer or VDU screens. All are equipped with high frequency control gear, but lamps are not included.
CABLE ENTRY DETAIL
• Louvre: Alanod anodized aluminium double parabolic.
• Lamp holder: G13, 105°C heat resistant wire.
• Control Gear: High frequency.
240V
max lamp dimensions (mm) ref no. watts volts (V) control gear type cap optic L W H
RF218CAT2/HF 2 x 18W 240 High Frequency T8 G13 Polished 595 295 85
HigH FRequenCy - LOuVRe
RFCBRKT Set of brackets to allow mounting into plasterboard ceilings - must be ordered separately.
Additional options:
• For emergency versions, add e3 to the ref. number, eg: RF418CAT2/HFe3.
IP 20 T8
are 18mm less.
• Diffuser: Prismatic flame retardant, waterproof, dustproof, good light distribution and easy to clean/maintain.
240V
RF218FP/HF 2 x 18W 240 High Frequency T8 G13 Opal or Prismatic 595 295 85
HigH FRequenCy - DiFFuSeR
Additional options:
• For emergency versions, add e3 to the ref. number, eg: RF418FP/HFe3
• The addition of a Silicon Gasket will make the units IP 54 please ask for details. • Prismatic diffuser and frame available on request
IP 44 T8
are 18mm less.
RECESSED MOUNT T5 LUMINAIRES
RF214CAT2 2 x 14W 240 High Frequency T5 G5 Polished 595 295 55
HigH FRequenCy - LOuVRe
Additional options:
• For emergency versions, add e3 to the ref. number, eg: RF414CAT2/e3.
240V IP 20 T5
are 18mm less.
• Diffuser: Prismatic flame retardant, waterproof, dustproof, good light distribution and easy to clean/maintain.
RECESSED MOUNT T5 LUMINAIRES IP44
RF314FP 3 x 14W 240 High Frequency T5 G5 Opal or Prismatic 595 595 70
HigH FRequenCy - DiFFuSeR
Additional options:
• For emergency versions, add e3 to the ref. number, eg: RF235FP/e3
• Prismatic diffuser and frame available on request
240V IP 44 T5
are 18mm less.
S
RELAX RECESSED T8 & T5 FLUORESCENT MODULAR FITTINGS - ASYMMETRICAL ReLAX T8 & T5 ASyMMeTRiCAL WALL WASH
max lamp dimensions (mm) ref no. watts volts (V) control gear type cap optic illustration L1 L2 W1 W2 H1 H2
RF118T8 1 x 18W 240 Switch Start T8 G13 Polished Fig 1 & Fig 2 595 619 198 175 81 23
RF136T8 1 x 36W 240 Switch Start T8 G13 Polished Fig 1 & Fig 2 1195 1219 198 175 81 23
RF114T5 1 x 14W 240 High Frequency T5 G5 Polished Fig 1 & Fig 3 595 572 198 175 81 -
RASTER 600 x 600mm
Specifications:
• Louvre: Curved asymmetrical wall wash
• Lamp holders: G5 & G13
• RAL colour: 9003
Additional options:
• For emergency versions, add e3 to the ref. number, eg: RF136T8e3.
240V T5 IP 20
RASTER 600 x 600mm
max volts control lamp basket dimensions (mm) ref no. watts (V) gear type cap optic description illustration L1 L2 W1 W2 H1
RF214VDu/iD 2 x 14W 240 High Frequency T5 G5 VDU Central x 1 Fig 1 & Fig 2 595 573 595 573 100
RF224VDu/iD 2 x 24W 240 High Frequency T5 G5 VDU Central x 1 Fig 1 & Fig 2 595 573 595 573 100
RF240VDu/iD 2 x 40W 240 High Frequency TC-L/PLL 2G11 VDU Central x 1 Fig 2 & Fig 2 595 573 595 573 100
RF255VDu/iD 2 x 55W 240 High Frequency TC-L/PLL 2G11 VDU Central x 1 Fig 2 & Fig 2 595 573 595 573 100
240V T5 IP 20 TC-L/PLL
L2
L1
H1
5
W2
W1
H1
W2
W1
H1
Specifications:
• Louvre: Perforated & Prismatic with half curved central basket for diffused illumination.
• Lamp holders: G5 & 2G11
Additional options:
• For emergency versions, add e3 to the ref. number, eg: RF224VDU/IDe3.
RF224VDU/ID
RFiDBRACKeT Set of brackets to allow mounting into plasterboard ceilings - must be ordered separately.
FLUORESCENT MODULAR SYSTEMS
inDiReCT/DiReCT DeCOR CenTRAL BASKeT
240V IP 20 TC-L/PLL
max volts control lamp basket dimensions (mm) ref no. watts (V) gear type cap optic description illustration L1 L2 W1 W2 H1
RF236CB/iD 2 x 36W 240 High Frequency TC-L/PLL 2G11 Perforated Central x 1 Fig 1 & Fig 2 595 573 595 573 100
L2
L1
H1
5
W2
W1
H1
5
W2
W1
H1
RASTER 600 x 600mm
• Louvre: Perforated curved central basket for diffused illumination.
• Lamp holders: 2G11
Additional options:
• For emergency versions, add e3 to the ref. number, eg: RF224VDU/IDe3.
RF240CB/ID
INDIRECT/DIRECT RECESSED TC-L/T5 FLUORESCENT MODULAR FITTINGS
inDiReCT/DiReCT CuRVeD LOuVRe WiTH CenTRAL DROP BASKeT
max volts lamp dimensions (mm) ref no. watts (V) control gear type cap optic L W H D
RF314PARV 3 x 14W 240 High Frequency T5 G5 VDU/Plain 623 595 50 163
RF24014PARVLg 2 x 40W + 1 x 14W 240 High Frequency TC-L/T5 2G11/G5 perforated 623 595 50 163
RF25514PARVLg 2 x 55W + 1 x 14W 240 High Frequency TC-L/T5 2G11/G5 perforated 623 595 50 163
W
H
• Louvre: Micro perforated curved louvre basket
• Lamp holders: TC-L & T5 complete and ready to wire.
RASTER 600 x 600mm
Additional options:
• For emergency versions, add e3 to the ref. number, eg: RF314PARV/e3.
RF314PARV
RF314PARV
90
120
60
90
120
60
cd/klm
150
100
50
Fig. 1 Fig. 2
max volts control lamp basket dimensions (mm ref no. watts (V) gear type cap optic description L1 L2 W1 W2 H
RF236SB/iD 2 x 36W 240 High Frequency TC-L/PLL 2G11 Perforated Side x 2 595 573 595 573 100
RASTER 600 x 600mm
240V IP 20 TC-L/PLL
• Louvre: Micro perforated curved side louvre baskets x 2.
• Lamp holders: 2G11
Additional options:
• For emergency versions, add e3 to the ref. number, eg: RF240SB/IDe3.
RF236SB/ID
INDIRECT/DIRECT RECESSED LG7 T5 FLUORESCENT MODULAR FITTINGS inDiReCT/DiReCT DeCOR SiDe BASKeT
max volts lamp dimensions (mm) ref no. watts (V) control gear type cap optic description L W H
DLRWL414/HF 4 x 14W 240 High Frequency T5 G5 VDU Specular Wedge Blade 595 595 55
DLRWL424/HF 4 x 24W 240 High Frequency T5 G5 VDU Specular Wedge Blade 595 595 55
L W
H
Designed for compatibility with today’s LG7 requirement. Ideal for situations where a combination of upward and downward light is needed.
Specifications:
• Louvre: Specular wedge blade
• Lamp holders: 2 x 2G11 complete and ready to wire.
Additional options:
• For emergency versions, add e3 to the ref. number, eg: DLRWL424/HFe3.
240V IP 20 T5
DLRLW414/HF
DLRWL414/HF
INDIRECT/DIRECT RECESSED T5 & TC-L/PLL DECOR FLUORESCENT MODULAR FITTINGS inDiReCT/DiReCT DeCOR CenTRAL BASKeT
max volts lamp dimensions (mm) ref no. watts (V) control gear type cap optic description L W H
DLCDX155/HF 1 x 55W 240 High Frequency TC-L/PLL 2G11 Perforated Curved Micro 595 595 140
DLCDX255/HF 2 x 55W 240 High Frequency TC-L/PLL 2G11 Perforated Curved Micro 595 595 140
DLCDX214/HF 2 x 14W 240 High Frequency T5 G5 Perforated Curved Micro 595 595 140
DLCDX224/HF 2 x 24W 240 High Frequency T5 G5 Perforated Curved Micro 595 595 140
L
W
H
Designed for compatibility with today’s commercial interiors with a curved micro perforated drop basket reflector as standard. Ideal for situations where a combination of direct and indirect light is required.
Specifications:
• Housing: White epoxy powder coated metal body
• Perforated curved louvre with an opal inner lining for diffused illumination as standard
• Injection moulded white plastic end caps
• Louvre and frosted ribbed diffuser attachments available as optional extras
• Lamp holders: G5 and 2G11 complete and ready to wire.
Additional options:
• DLCDXD Frosted ribbed diffuser attachment only - - Must be ordered separately.
• For emergency versions, add e3 to the ref. number, eg: DLCDX224/HFe3.
240V IP 20 T5 TC-L/PLL
DLCDX255/HF COMPLETE WITH PERFORATED LOUVRE AS STANDARD
COMPLETE WITH DLCDXC LOUVRE ATTACHMENT
90
120
60
90
120
60
cd/klm
COMPLETE WITH DLCDXD FROSTED ATTACHMENT
ref no. dimensions rating
DLBF5 600 x 600 x 200mm (L x W x H) 66 mins
DLBF6 1200 x 600 x 200mm (L x W x H) 66 mins
FiRe TenTS FOR RF FiTTingS
The Blazefender intumescent fire tents are designed to comply with Part B of the Building Regulations and the relevant British and European standards.
Features:
• 66 minutes fire rating.
• Prevents fire from penetrating the ceiling void and retains ceilings fire protection integrity.
• Ventilated to reduce heat build-up.
• Tested by Warringtonfire global safety.
FIRE TENT IN POSITION IN ROOF VOID
R SYSTEM S
Déluce Lighting offer a wide range of surface fluorescent modular luminaires.
Our high frequency (recommended) or magnetic control gear is available with a choice of louvres and diffusers.
Déluce Lighting can supply luminaires suitable for many applications, including retail, commercial and industrial environments and especially offices, classrooms, banks and hospitals.
Emergency versions are available to order.
240V
SF218CAT2/HF 2 x 18W 240 High Frequency T8 G13 Polished 595 295 85
HigH FrequenCy - LOuVre
Additional options:
• For emergency versions, add e3 to the ref. number, eg: SF418CAT2/HFe3.
IP 20 T8
SURFACED MOUNT T5 LUMINAIRES
SF314CAT2 3 x 14W 240 High Frequency T5 G5 Polished 630 630 55
HigH FrequenCy - LOuVre
Additional options:
• For emergency versions, add /e3 to the ref. number, eg: SF414CAT2/e3.
L W
T2 SbC IP40 SURFACED MOUNT T8 LUMINAIRES
max lamp dimensions (mm) fixing ref no. watts volts (V) control gear type cap optic L W H centres (mm)
DLSBC136 1 x 36W 240 High Frequency T8 G13 Prismatic 1255 75 70 1010
DLSBC236 2 x 36W 240 High Frequency T8 G13 Prismatic 1255 152 70 910 x 130
DLSBC158 1 x 58W 240 High Frequency T8 G13 Prismatic 1550 75 70 1310
DLSBC258 2 x 58W 240 High Frequency T8 G13 Prismatic 1550 152 70 1210 x 130
HigH FrequenCy - PriSMATiC DiFFuSer
Additional options:
• For emergency versions, add /e3 to the ref. number, eg: DLSbC158/e3.
240V IP 40 T8
A light fitting with a simple and practical design, including a prismatic diffuser. Ideal for use in areas where fast installation, ease of maintenance and cleaning are required.
Specifications:
stabilised to prevent discolouring. PMMA end caps
• Diffuser: PMMA prismatic
• Spring end caps for ease of maintenance
DLSBC136
DLSBC236
L
W
H
• Diffuser: Prismatic Polycarbonate.
DLMeA214 2 x 14W 240 High Frequency T5 G5 Prismatic 585 184 85
HigH FrequenCy - DiFFuSer
Additional options:
• For emergency versions, add /e3 to the ref. number, eg: DLMEA228/e3 - Not available for the 14W version
• Choice of colour filler - Please ask for details.
L W
240V IP 40 T5
High performance surface mounted T5 luminaire, ideally suitable for hospitals, schools, colleges and other similar applications. All the luminaires are UV stabilised to prevent discolouring, have a choice of colour filter option and integrated gear tray covers. They can be continuously mounted with a joining piece.
DLMeAJP Joining piece for continuous mounting.
GREEN
BLUE
RED
CLEAR
90
60
90
60
• Lamp holder: G5 complete and ready to wire.
DLSiP214 2 x 14W 240 High Frequency T5 G5 Opal 660 210 75
DLSiP254 2 x 54W 240 High Frequency T5 G5 Opal 1255 210 75
HigH FrequenCy - DiFFuSer
Additional options:
• For emergency version add /e3 to the ref. number, eg: DLSIP254/e3 - Not available for the 14W version
L W
Contemporary T5 luminaire, ideal for laboratories, food factories and most workplaces with similar lighting requirements.
S
The SCUDO luminaire range offers clean yet elegant design with high aesthetic appeal and low energy.
The range has seven different sizes including wall, ceiling, suspended and emergency versions* and high frequency or switch start options*.
With a compact shape and low profile, the SCUDO is a good looking solution for all commercial, office and educational establishments.
Maintenance is quick and easy by simply sliding the glass upwards to expose the lamp and internal components. The Scudo is supplied with electronic control gear, but the compact fluorescent lamps are not included.
Made of chromed metal with a satin glass diffuser (polycarbonate diffusers are available on request). The choice of colour finish is either chrome or brushed nickel.
* Please check on specification charts for the availability of the various options for each luminaire range.
THE SCUDO RANGE
240V IP 20 TC-L/PLL
max control finish/ ref no. voltage watts cap lamp type gear Colour
M12931 240V 2 x 18W 2G11 TC-L/PLL High Frequency Nickel
M12935 240V 2 x 18W 2G11 TC-L/PLL High Frequency Chrome
M1291 240V 2 x 18W 2G11 TC-L/PLL Switch Start Nickel
M1295 240V 2 x 18W 2G11 TC-L/PLL Switch Start Chrome
SCuDO PL40
max control finish/ ref no. voltage watts cap lamp type gear colour
SCuDO PL60
240V IP 20 TC-L/PLL
SCuDO PL50
200
SCuDO PL70
Easy lamp replacement across the whole range
The lamps are easily replaced by sliding the glass upwards - no tools are required.
THE SCUDO RANGE
max lamp control finish/ ref no. voltage watts cap type gear colour
SCuDO qu45
60 0
600 max lamp fitting finish/ ref no. voltage watts cap type type colour
SCuDO qu60
240V IP 20 TC-L/PLL
max lamp fitting finish ref no. voltage watts cap type type colour fitting
M12940 240V 2 x 24W 2G11 TC-L/PLL Emergency Nickel Scudo PL60
M12941 240V 2 x 24W 2G11 TC-L/PLL Emergency Chrome Scudo PL60
M12942 240V 4 x 24W 2G11 TC-L/PLL Emergency Nickel Scudo QU45
M12943 240V 4 x 24W 2G11 TC-L/PLL Emergency Chrome Scudo QU45
M12944 240V 2+2 x 24/36W 2G11 TC-L/PLL Emergency Nickel Scudo QU60
M12945 240V 2+2 x 24/36W 2G11 TC-L/PLL Emergency Chrome Scudo QU60
SCuDO eMergenCy OPTiOnS
240V IP 20 TC-L/PLL Black-out 1 x 24W (20%) automatic minimum 1 Hour
Maintained emergency lighting for use with fluorescent lamps 24/36W.
Supplied with:
• rechargeable Ni-Cd battery;
• the electronic control unit has a built-in protection device against battery discharge
• with a lighting diode (LED) which indicates that the battery is under charge.
Emergency operating time is minimum 1 hour and the lighting flux is constant during battery discharge.
90
120
60
90
120
SCUDO PL40 & PL50 SCUDO PL60 & PL70 SCUDO QU45 SCUDO QU60
R SYSTEM S
SCuDO SO60
Lighting fittings for wall, ceiling or suspension applications with silk-screen glass diffuser. Steel body with extruded aluminium frame epoxy-polyester paint finish.
New versions with low luminance louver for an optimal visual comfort, reducing direct and reflected glare.
Ceiling fittings for the illumination of domestic environments, entertainment areas, work places such as offices, banks, schools, lobbies, meeting and waiting rooms or passage areas.
All fittings include tubular T5 fluorescent lamps or last generation electronic compact fluorescent lamp, with integral high frequency ballast.
THE SAN RANGE
38022152 240V 2 x 26W G24q-3 FSQ 3.3Kg
max ref no. voltage watts cap lamp type weight
38142152 240V 2 x 42W GX24q-4 FSMH 4.9Kg
38213152 240V 3 x 36W 2G11 FSD 7.6Kg
SAn 35
SAn 45
SAn 55
35 0
350 65
45 0
450 65
55 0
550 65
160971 Suspension kit for SAN 55 fixtures
37782152 240V 2 x 55W 2G11 FSD 6Kg
37822152 240V 2 x 54W G5 T5 10.2Kg
SAn 72
SAn 134
IP 40
A pha
For suspension purposes utilise specific suspension kit below
THE SAN RANGE MATeriALS
Steel body and extruded aluminium frame epoxy-polyester paint finish. Available with silk-screen glass diffuser or with louver, in 99.9% mirror aluminium, composed of longitudinal parabolic elements and transversal blades.
The specific slots and the automatic graft terminal block make the installation extremely simple and fast. The front glass sliding along the frame makes easier the replacement of the lamps and the maintenance.
37841152 240V 1 x 54W G5 T5 8Kg
ref no. description
160979 Suspension kit for SAN DARK single lamp fixtures
160980 Suspension kit for SAN DARK twin lamp fixtures
37852152 240V 2 x 54W G5 T5 10.5Kg
SingLe LAMP FiTTing TWin LAMP FiTTing
T5 T5
SAN DARK
Also includes:
• Translucent canopy
THE MONOS LIGHTING SYSTEM
The simple and elegant MONOS Lighting System with its ellipsoidal shape, is fast and easy to install. Suitable for Department Stores, Hospitals, Stairways, Commercial and Industrial installations.
Features:
• Complies with EN 60598-1 and EN 60598-2-5 Standards
• IP20 Protection, can be upgraded to IP40 if cathode cover is used (available on request)
L W
max dimensions (mm) ref no. watts lamp cap colour weight W x L x H
102011 1 x 18 T8 G13 White 1.50 Kg 70 x 641 x 90
102021 1 x 18 T8 G13 Aluminium 1.50 Kg 70 x 641 x 90
102111 1 x 36 T8 G13 White 2.60 Kg 70 x 1245 x 90
102211 1 x 58 T8 G13 White 3.10 Kg 70 x 1545 x 90
SingLe LAMP
THE MONOS LIGHTING SYSTEM
MONOS LIGHTING SYSTEM - ACCESSORIES
dimensions (mm) ref no. colour weight W x L x H
103111 White 2.47 Kg 70 x 1245 x 90
103121 Aluminium 2.47 Kg 70 x 1245 x 90
103211 White 3.00 Kg 70 x 1545 x 90
103221 Aluminium 3.00 Kg 70 x 1545 x 90
STruCTurAL MODuLe
qty for qty for qty for ref no. description weight 18W 36W 58W
1121 Chrome Plated Louvre 0.06 Kg 2 4 5
LOuVreS
1123 Methacrylate Screen 0.14 Kg 18W Versions
MeTHACryLATe SCreen - FACeTeD inSiDe
240V IP 20 T8
Ø70
13454
FLeXiBLe JOinT
ref no. colour weight
1117 black 0.34 Kg
1.5 metre long steel wire Suspension Kit c/w electrical cable
1118 black 0.01 Kg
ref no. length weight
SuSPenSiOn KiT
1. 5
m et
re s
SuSPenSiOn KiT
Ø 10mm black painted Suspension Rod with steel bracket, rosette and hook
THE MONOS LIGHTING SYSTEM - ACCESSORIES
ref no. weight
1109 0.01 Kg
115011 White 0.42 Kg
115012 black 0.42 Kg
OTHer JOinTS ALSO AVAiLABLe in THe rAnge
70
40
R SYSTEM S
The HIGH-FIVE system has been designed to suit the latest T5 (Ø16mm) tubes and is available in Direct or Indirect/Direct versions. With smooth, well defined lines and small dimensions, the HIGH-FIVE T5 system is at ideal for shops, commercial premises and offices. The HIGH-FIVE is supplied in a white finish as standard, but is also available in an aluminium finish.
Features:
• UV stabilised powder coated finish (White or Aluminium).
• choice of 2 anodized aluminium reflectors (Matt or Reflective)
• complies with EN 60598-1 and EN60598-2-1 Standards.
• prismatic transparent screen in PMMA material
• DLM or DLS reflectors.
• variety of fixing methods available and can be joined together with connecting joints to form connected lighting systems.
DLM and DLS double parabolic low-luminace reflectors are designed for computer areas and workstations to EN 12464-1. These working environments require the luminaires or screens to be placed to prevent disturbing reflections. Therefore it is necessary to use fittings which have emission angles between 65° and 85° and do not exceed the average luminance values below:
screen contrast luminance limit reflector to be used
Untreated Negative 200 cd m-2 DLM 60°; DLS 60°
Untreated Positive 500 cd m-2 DLM 60°; DLS 60°
Non-reflective Negative 500 cd m-2 DLM 60°; DLS 60°
Non-reflective Positive 1000 cd m-2 DLM 60°; DLS 60°
THE HIGH-FIVE T5 SYSTEM - INDIRECT/DIRECT LIGHT
L
W
H
• 60° dark light bi-parabolic reflector in non-iridescent (reflective) specular 2µm thick anodized aluminium.
max lamp dimensions (mm) ref no. watts volts (V) control gear type cap optic finish light type L W H
150511 2 x 14W 240 High Frequency T5 G5 Reflective White Dark Light ≤ 200cd m-2 581 257 69.5
HigH Frequency DirecT LigHT - DLS 60°
Additional options:
• For Aluminium finish, replace last 2 digits of the ref no. with 21, eg: 150521.
• For emergency versions, add e3 to the ref. number, eg: 150511e3.
• The HIGH-FIVE T5 fitting is supplied without End Caps for use in connected lighting systems. When used as a single light fitting, End Caps x 2 (ref. no: 1595) must be ordered separately.
NOTE: E3 versions only available in 1 Hour.
240V IP 20 T5 850°C
Specifications:
• 60° dark light bi-parabolic reflector in satinised (matt) specular 2µm thick anodized aluminium.
151511 2 x 14W 240 High Frequency T5 G5 Matt White Dark Light ≤ 200cd m-2 581 257 69.5
HigH Frequency DirecT LigHT - DLM 60°
Additional options:
• For emergency versions, add e3 to the ref. number, eg: 151511e3
240V IP 20 T5 850°C
THE HIGH-FIVE T5 SYSTEM - DIRECT LIGHT
90
120
60
45
90
120
60
45
• 60° dark light bi-parabolic reflector in non-iridescent (reflective) specular 2µm thick anodized aluminium.
HigH Frequency inDirecT/DirecT LigHT - DLS 60°
Additional options:
• For Aluminium finish, replace last 2 digits of the ref no. with 21,eg: 152521.
• For emergency versions, add e3 to the ref. number, eg: 152511e3.
240V IP 20 T5 850°C
Specifications:
• 60° dark light bi-parabolic reflector in satinised (matt) specular 2µm thick anodized aluminium.
HigH Frequency inDirecT/DirecT LigHT - DLM 60°
Additional options:
• For emergency versions, add e3 to the ref. number, eg: 153511e3
240V IP 20 T5 850°C
THE HIGH-FIVE T5 SYSTEM - INDIRECT/DIRECT LIGHT
90
120
60
45
90
120
60
45
SuSpenSion KiT
STrucTuraL MoDuLe
WireD SuSpenSion KiT
ref no. colour wired weight
158911 White No 0.30 Kg
158921 Aluminium No 0.30 Kg
SuSpenSion KiT
Suspension Kit c/w millimetric adjustment cable, suitable for wired connection.
LENGTH
1.5 metre long steel wire Suspension Kit c/w millimetric adjustment
SuSpenSion KiT
1. 5
m et
re s
ceiLing aTTacHMenT 35
enD cap
angLe JoinT
STraigHT JoinT
Die-cast aluminium
S
The BRIO modular system is designed as a solution for lighting designers to implement contemporary designs in a wide variety of environments, especially ideal for shops, commercial premises and offices. BRIO uses the MONOS system of accessories which together offers a large choice of options and alternatives.
The system is quick and easy to install and can be joined to form large lighting rigs.
Features:
• polished 99.9 aluminium reflector
• various colours are available - please call for details
THE BRIO MODULAR SYSTEM
R SYSTEM S
max dimensions (mm) ref no. watts lamp cap finish weight W x L x H
124011 1 x 18 T8 G13 White 1.40 Kg 99 x 644 x 90
124111 1 x 36 T8 G13 White 2.10 Kg 99 x 1245 x 90
124211 1 x 58 T8 G13 White 2.50 Kg 99 x 1545 x 90
SingLe LaMp
dimensions (mm) ref no. finish weight W x L x H
105411 White 2.47 Kg 99 x 1245 x 90
105421 Aluminium 2.47 Kg 99 x 1245 x 90
105511 White 3.00 Kg 99 x 1545 x 90
105521 Aluminium 3.00 Kg 99 x 1545 x 90
SingLe LaMp STrucTuraL MoDuLe
H H
W WL
T8
max dimensions (mm) ref no. watts lamp cap colour weight W x L x H
124311 2 x 18 T8 G13 White 2.05 Kg 134 x 648 x 97
124411 2 x 36 T8 G13 White 3.70 Kg 134 x 1250 x 97
124511 2 x 58 T8 G13 White 5.05 Kg 134 x 1550 x 97
DouBLe LaMp
240V IP 20 850°CT8
BRIO MODULAR SYSTEM - ACCESSORIES
SingLe LaMp LouVre DouBLe LaMp LouVre
dimensions (mm) ref no. finish weight W x L x H
124811 White 2.60 Kg 134 x 1250 x 97
124821 Aluminium 2.60 Kg 134 x 1250 x 97
124911 White 3.30 Kg 134 x 1550 x 97
124921 Aluminium 3.30 Kg 134 x 1550 x 97
DouBLe LaMp STrucTuraL MoDuLe
max dimensions (mm) ref no. watts cap colour weight W x L x H
124711 3 x 50 GX5.3 White 4.80 Kg 134 x 1250 x 97
124712 3 x 50 GX5.3 Aluminium 4.80 Kg 134 x 1250 x 97
DicHroic MoDuLe
Complete with transformer and 3 black adjustable downlights for 12V 20/50W GX5.3 lamps
12V IP 40 850°C GX 5.3
90
60
75
45
1158 Black 0.06 Kg
1136 Black 0.02 Kg
1136 Black 0.02 Kg
FLeXiBLe JoinT
1117 Black 0.34 Kg
1.5 metre long steel wire Suspension Kit c/w electrical cable
1118 Black 0.01 Kg
SuSpenSion KiT
1. 5
m et
re s
SuSpenSion KiT
Ø 10mm black painted Suspension Rod with steel bracket, rosette and hook
ref no. weight
1109 0.01 Kg
THE BRIO MODULAR SYSTEM - MULTISYSTEM RANGE
115011 White 0.42 Kg
115012 Black 0.42 Kg
Die-cast aluminium 2-Way Multisystem Joint Die-cast aluminium Adaptor joins together Multisystem Joints
Multisystem range of accessories to complement the BRIO range. oTHer JoinTS aLSo aVaiLaBLe in THe range
70
40
FIXED DOWNLIGHTS
TILT/GIMBLE DOWNLIGHTS
EYEBALL DOWNLIGHTS
FIXED DOWNLIGHTS
EYEBALL DOWNLIGHTS
ROUND TILT DOWNLIGHT KIT
Page 63
D O
W N
LI G
H TS
Déluce Lighting’s Blazefender range of fire and acoustic rated downlights, includes fixed, tilt and showerlight models and a choice of four finishes.
DOWNLIGHTS
Features:
• Tested by Warringtonfire Global Safety
• Acoustic rated to BS EN ISO 140-3:1995 & BS EN ISO 140-6:1998
• Ventilated to reduce heat build-up
• Intumescent Gasket
• Choice of Low Voltage or Mains Voltage
• c/w Aluminium 50 Watt max GU10 or GX 5.3 Low Voltage lamp
• Choice of 4 finishes
LOW VOLTAGE
BF10 SCH 12V Satin Chrome MR16 50 72mm
BF10 PB 12V Polished Brass MR16 50 72mm
BF10 CH
MAINS VOLTAGE
BF10 SCHGU10 240V Satin Chrome GU10 50 72mm
BF10 PBGU10 240V Polished Brass GU10 50 72mm
240V
Ø86
Ø63
81
21
ChoiCe of finish All Blazefender Downlights are supplied with a paint finish protective cap.
White Chrome Satin Chrome Polished Brass Protective Cap
BLAZEFENDER FIXED DOWNLIGHTS
Features::
• 30° Tilt
• Choice of Low Voltage or Mains Voltage
• c/w Aluminium 50 Watt max GU10 or GX 5.3 Low Voltage lamp
LOW VOLTAGE
Additional information:
MAINS VOLTAGE
Ø93
Ø77
82
21
Alu GU10
Alu
DOWNLIGHTS
Features:
• c/w 35 Watt max MR16 lamp
LOW VOLTAGE
BF12 PB
MAINS VOLTAGE
240V
GU10 MR16
Ø86
Ø63
90
21
DOWNLIGHTS
Features:
• Mains Voltage
• c/w Aluminium Compact Fluorescent max. 13 Watt lamp This lamp is not dimmable
BF15 CHLEL
MAINS VOLTAGE
BF15 WHLEL 240V White GU10 CFL 13 72mm
BF15 CHLEL 240V Chrome GU10 CFL 13 72mm
BF15 SCHLEL 240V Satin Chrome GU10 CFL 13 72mm
BF15 PBLEL 240V Polished Brass GU10 CFL 13 72mm
BLAZEFENDER LOW ENERGY FIXED DOWNLIGHTS
Ø86
Ø63
95
TS
Déluce Lighting’s range of pressed steel downlights, includes fixed, tilt and eyeball models with a variety of finishes.
DOWNLIGHTS
PLVD50 SCH 12V Satin Chrome MR16 50 60mm
PLVD50 PB 12V Polished Brass MR16 50 60mm
PLVD50 AB 12V Antique Brass MR16 50 60mm
MAINS VOLTAGE
PTR16D SCH 240V Satin Chrome GU10 50 65mm
PTR16D GP 240V Polished Brass GU10 50 65mm
FIXED DOWNLIGHTS
PTR16D GP
DOWNLIGHTS
PTR16TD SCH 240V Satin Chrome GU10 50 80mm
PTR16TD GP 240V Polished Brass GU10 50 80mm
TILT/GIMBLE DOWNLIGHTS
CTSLH Spare lampholder GX5.3
CTSLH
CTSLHGU10
35° Tilt
Page 71
D O
W N
LI G
H TS
PRESSED STEEL RECESSED DOWNLIGHTS Range of low voltage and mains voltage eyeball downlights, manufactured from pressed steel.
LOW VOLTAGE
PLVE50 SCH 12V Satin Chrome MR16 50 80mm
PLVE50 PB 12V Polished Brass MR16 50 80mm
PLVE50 AB 12V Antique Brass MR16 50 80mm
MAINS VOLTAGE
PTR16E SCH 240V Satin Chrome GU10 50 80mm
PTR16E GP 240V Brass GU10 50 80mm
12V 240V0.5m 0.5m GX 5.3 GU10
PLVE50 PB
EYEBALL DOWNLIGHTS
Ø100
Ø70
50
DOWNLIGHTS
PRESSED STEEL RECESSED DOWNLIGHTS - REFLECTOR Range of mains voltage Reflector downlights, manufactured from pressed steel.
MAINS VOLTAGE
PTR50D GP 240V Gold Plated R50/SES 40 65mm
PTR63D WH 240V White R63/ES 60 76mm
PTR63D CH 240V Chrome R63/ES 60 76mm
PTR63D GP 240V Gold Plated R63/ES 60 76mm
PTR80D WH 240V White R80/ES 100 98mm
PTR80D CH 240V Chrome R80/ES 100 98mm
PTR80D GP 240V Gold Plated R80/ES 100 98mm
240V 0.5m
FIXED DOWNLIGHTS
PTR63D WH
PRESSED STEEL RECESSED DOWNLIGHTS - REFLECTOR Range of mains voltage Eyeball downlights, manufactured from pressed steel.
MAINS VOLTAGE
PTR50E GP 240V Gold Plated R50/SES 40 92mm
PTR63E WH 240V White R63/ES 60 120mm
PTR63E CH 240V Chrome R63/ES 60 120mm
PTR63E GP 240V Gold Plated R63/ES 60 120mm
PTR80E WH 240V White R80/ES 100 135mm
PTR80E CH 240V Chrome R80/ES 100 135mm
PTR80E GP 240V Gold Plated R80/ES 100 135mm
240V 0.5m
EYEBALL DOWNLIGHTS
TS
Déluce Lighting’s range of die-cast aluminium downlights, includes fixed, tilt and shaped models with a variety of finishes, available boxed and/or blister packed .
DOWNLIGHTS
LOW VOLTAGE
BDL10 SCH 12V Satin Chrome MR16 50 70mm
BDL10 PB 12V Polished Brass MR16 50 70mm
MAINS VOLTAGE
BDL10 SCHGU10 240V Satin Chrome GU/GZ10 35 70mm
BDL10 PBGU10 240V Polished Brass GU/GZ10 35 70mm
12V 240V0.5m 0.5m MR16 GU/GZ10
BDL10 CH
DL10 GU10
DL10 MR16
LOW VOLTAGE
BDL10T SCH 12V Satin Chrome MR16 50 82mm
BDL10T PB 12V Polished Brass MR16 50 82mm
MAINS VOLTAGE
BDL10T SCHGU10 240V Satin Chrome GU/GZ10 35 82mm
BDL10T PBGU10 240V Polished Brass GU/GZ10 35 82mm
12V 240V0.5m 0.5m MR16 GU/GZ10
ROUND TILT DOWNLIGHTS
DL10T GU10
DL10T MR16
DL2 SCHGU10 240V Satin Chrome GU/GZ10 50 62mm
DL2 PBGU10 240V Polished Brass GU/GZ10 50 62mm
max ref no. volts finish lamp watts
DL2 WH 12V White MR16 50 62mm
DL2 CH 12V Chrome MR16 50 62mm
DL2 SCH 12V Satin Chrome MR16 50 62mm
DL2 PB 12V Polished Brass MR16 50 62mm
DIE-CAST ALUMINIUM RECESSED DOWNLIGHTS - BOXED
LOW VOLTAGE MAINS VOLTAGE
DL2 SCHGU10
DL2 GU10
DL2 MR16
LOW VOLTAGE
BDL4 SCH 12V Satin Chrome Mr16 50 61mm
BDL4 PB 12V Polished Brass Mr16 50 61mm
12V 0.5m MR16
ChoiCe of finish
76
19
48
DOWNLIGHTS
LOW VOLTAGE
BDLT2 SCH 12V Satin Chrome Mr16 50 74mm
BDLT2 PB 12V Polished Brass Mr16 50 74mm
MAINS VOLTAGE
BDLT2 SCHGU10 240V Satin Chrome GU/GZ10 50 74mm
BDLT2 PBGU10 240V Polished Brass GU/GZ10 50 74mm
12V 240V0.5m 0.5m MR16 GU/GZ10
BDLT2 SCH
ChoiCe of finish
DLT2 GU10DLT2 MR16
LOW VOLTAGE
BDLT4 SCH 12V Satin Chrome Mr16 50 61mm
BDLT4 PB 12V Polished Brass Mr16 50 61mm
12V 0.5m MR16
SQUARE FIXED DOWNLIGHTS
ChoiCe of finish
82
25
93
DLDIL021
DLDIL023
DLDIL026
DLDIL022
DLDIL024
• Adjustable on two axes to allow precise direction of light
max lamp ref no. volts dimensions (LxW) watts type
DLDIL021 12V 87 x 87mm 50 MR16 76 x 76mm
DLDIL022 12V 173 x 87mm 50 MR16 165 x 76mm
DLDIL023 12V 260 x 87mm 50 MR16 252 x 76mm
DLDIL024 12V 173 x 173mm 50 MR16 165 x 165mm
DLDIL026 12V 260 x 173mm 50 MR16 252 x 165mm
12V 0.5m MR16
ADJUSTABLE HALOGEN DOWNLIGHT
• Uses the worlds smallest dichroic halogen MR8 (25mmØ)
• Individual lamps can tilt 12 and rotate up to 115
• 20W lamp(s) included
• Low Voltage fittings require a Transformer - Sold separately.
max lamp lamp ref no. volts dimensions (Ø) watts type diameter (Ø)
DLDNL011SS 12V 88mm 20 Mr8 25mm 80mm
12V 0.5m MR8
LOW VOLTAGE
DL10 SCH 12V Satin Chrome Mr16 50 70mm
DL10 PB 12V Polished Brass Mr16 50 70mm
MAINS VOLTAGE
DL10 SCHGU10 240V Satin Chrome GU/GZ10 35 70mm
DL10 PBGU10 240V Polished Brass GU/GZ10 35 70mm
12V 240V0.5m 0.5m MR16 GU/GZ10
DL10 CH
DL10 GU10
DL10 MR16
LOW VOLTAGE
DL10T SCH 12V Satin Chrome Mr16 50 82mm
DL10T PB 12V Polished Brass Mr16 50 82mm
MAINS VOLTAGE
DL10T SCHGU10 240V Satin Chrome GU/GZ10 35 82mm
DL10T PBGU10 240V Polished Brass GU/GZ10 35 82mm
12V 240V0.5m 0.5m MR16 GU/GZ10
ROUND TILT DOWNLIGHTS
DL10T GU10
DL10T MR16
LOW VOLTAGE
DL1DG SCH 12V Satin Chrome Mr16 50 62mm
DL1DG PB 12V Polished Brass Mr16 50 62mm
MAINS VOLTAGE
DL1DG SCHGU10 240V Satin Chrome GU/GZ10 35 62mm
DL1DG PBGU10 240V Polished Brass GU/GZ10 35 62mm
12V 240V0.5m 0.5m MR16 GU/GZ10
DL1DG CH
Features:
• All fittings complete with lamps
DL1DG GU10DL1DG MR16
ENErGY SAVING rECESSED DOWNLIGHTS
ROUND TILT DOWNLIGHT KIT
The Déluce energy saving downlight kit. This luminaire and lamp package is perfect where energy savings and maintenance costs need to be reduced. The luminaire is ideal for eliminating the short lamp life and heat problems associated with GU10 lamps.
Note: Please note these luminaires are not dimmable.
Features:
• 2700°K warm white or 4000°K cool white lamps
• 20% less energy consumption compared with halogen lamps
lamp max ref no. volts finish lamp colour watts
DLDL13CH 240V Chrome GU10 4000°K 13 75mm
DLDL13SN 240V Satin Nickel GU10 4000°K 13 75mm
MAINS VOLTAGE
WiThoUT fiRe hooD
WiTh fiRe hooD
The Déluce Lighting Blazefender range of intumescent fire hoods and downlight covers, designed to comply with Part B of the Building Regulations and the relevant British and European standards.
See our range of Blazefender RF fittings.
ref no. dimensions rating
Features:
• Covers a wide range of mains and low voltage downlights
• Prevents fire from penetrating the ceiling void and retains ceilings fire protection integrity
DOWNLIGHTS
LOW VOLTAGE EMERGENCy SLIMLINE CONVERTOR PACK
Convertor packs will convert any low voltage halogen downlight into an emergency fitting. The fitting may be used normally while power is applied as the integral transformer both powers the lamp and charges the internal battery.
Slimline units can be fitted through most downlight cut-outs without further cutting.
maintained duration emergency ref no. mode 50W (20W) brightness length weight
DLSLIM1/6M Yes 1.5 (3) hours Half (6V) 600 mm 1 Kg
DLSLIM3/6M Yes 3 (6) hours Half (6V) 600 mm 1 Kg
DLSLIM3/12M Yes 3 (6) hours Full (12V) 1400 mm 3 Kg
IP 20
DLV6 6-way terminal block with screws 210W
230V IP 20
TOROIDAL LOW VOLTAGE TRANSFORMERS
93
94
95
97
230V SELV equipment
As a major distributor of transformers, Déluce are only too aware of the problems associated with dimming low voltage lighting systems. To bring an end to the uncertainty of compatibility, Déluce have introduced a top-quality dimmable transformer at a realistic price.
The transformer range is now available in the shape of the YT50 and YT70 (70VA & 105VA respectively and both are supplied with leads fitted) and the YT105, YT150 and YT250 (105VA, 150VA & 250VA respectively).
These transformers are fully compatible with Varilight® dimmers including their touch and touch/remote control dimmers. In addition to this, they are packed with many other innovative features.
Features:
• Auto-resetting overload, surge protection and over-temperature protection
• Soft start for extended lamp life
• Any loading up to the maximum will work. Can be loaded from 0 (ie. total lamp failure) to its maximum rating
• Dim up to 10 transformers in parallel per intelligent dimmer module (only 5 when other transformers are used) up to maximum load of dimmer module
• For dimming, load is measured by the rating of the lamps (not by the transformer rating as with other transformers)
• Captive screws for easy installation in tight spaces
• Designed in consultation with electricians for ease of cable termination and fitting
• Ultra-cool running, fully tested and certified
Technical Specifications:
ref no: YT50 YT70 YT105 YT150 YT250
Input Voltage 230+/- 10%; 50Hz 230+/- 10%; 50Hz 230+/- 10%; 50Hz 230+/- 10%; 50Hz 230+/- 10%; 50Hz
Input Current 0.22A for 50W 0.33A for 70W 0.46A for 105W 0.65A for 150W 1.1A for 250W
Power Range 50VA: 0-50W 70VA: 0-70W 105VA: 0-105W 150VA: 0-150W 250VA: 0-250W
Output Voltage 11.5V max. 4.5A 11.5V max. 6.5A 11.5V max. 9.3A 11.5V max. 12.5A 11.5V max. 22A
Power Factor > 0.99 > 0.99 > 0.99 > 0.99 > 0.99
Ambient temperature range 0 - 40°C 0 - 40°C 0 - 40°C 0 - 40°C 0 - 40°C
Insulation Class II II II II II
Quantity of Input Terminals Leaded 2 2 4 4
Quantity of Output Terminals Leaded Leaded 4 6 6
Dimensions mm (A x B x C) 23.5 x 71.5 x 35 29.5 x 118 x 36.5 29.5 x 118 x 36.5 32 x 160 x 53 37 x 160 x 53
Weight 75g 120g 140g 230g 250g
ref no. description
YT50 0 - 50W Low Voltage Transformer c/w Input & Output Leads
YT70 0 - 70W Low Voltage Transformer c/w Output Leads
YT105 0 - 105W Low Voltage Transformer
YT50
The TECLITE electronic transformer designed specifically for low voltage halogen lamps.
Features:
• Output voltage: 11.6V~eff, Max 4.9A
• Power factor: COSØ = 0.99
• RFI suppression: To EN55015
• Fixing screws supplied.
ref no. description
230V SELV equipment
Page 94
LO W
V O
LTA G
E TRA
N SFO
RM ERS
400 - 500VA
The Déluce IP20 PT range fully encapsulated single output safety isolating step-down toroidal transformers with auto-reset thermal protection.
Output via stud terminals suitable for track or wiring systems requiring complete protection from overload or accidental short circuit conditions.
Features:
Transformers
• Excellent voltage regulation
• Flame retardant polycarbonate casing
EN 60742: 1989
decks to aid installation
DLT100 100VA 1 x 12V, 100VA 220/240V AC 50Hz
DLT150 150VA 1 x 12V, 150VA 220/240V AC 50Hz
DLT200 200VA 1 x 12V, 200VA 220/240V AC 50Hz
DLT250 250VA 1 x 12V, 250VA 220/240V AC 50Hz
DLT300 300VA 1 x 12V, 300VA 220/240V AC 50Hz
DLT400 400VA 1 x 12V, 400VA 220/240V AC 50Hz
DLT500 500VA 1 x 12V, 500VA 220/240V AC 50Hz
Dimensions for DLT400 and 500 = 270 x 220 x 90mm (L x D x H)
230V IP 20
Page 95
LO W
V O
LT A
G E
TR A
N SF
O RM
ER S
The Déluce IP20 self resetting MF range of maintenance free safety isolating step-down toroidal transformers with re-settable output protection, ideally suited for applications where the transformers location is not easily accessible but where total protection of the installation is required.
Multi-output 20-50W per output, unused outputs may be left disconnected without detrimental effect.
Features:
Transformers
• Flame retardant polycarbonate casing
EN 60742: 1989
decks to aid installation
DLT ToroiDAL muLTi-ouTpuT poTTED rANGE
ref no. VA output input
DLT100/2 100VA 2 x 20-50VA 220/240V AC 50Hz
DLT150/3 150VA 3 x 20-50VA 220/240V AC 50Hz
DLT200/4 200VA 4 x 20-50VA 220/240V AC 50Hz
DLT250/5 250VA 5 x 20-50VA 220/240V AC 50Hz
DLT300/6 300VA 6 x 20-50VA 220/240V AC 50Hz
DLT400/8 400VA 8 x 20-50VA 220/240V AC 50Hz
DLT500/10 500VA 10 x 20-50VA 220/240V AC 50Hz
Dimensions for DLT400 and 500 = 270 x 220 x 90mm (L x D x H)
Page 96
LO W
V O
LTA G
E TRA
N SFO
RM ERS
A full range of outdoor transformers ideal for the garden. Fully encapsulated with polyurethane resin from 50VA - 300VA single outputs. All the transformers have over heat temperature protection with internal self-resetting thermal trips.
All the range is suitable for dimming with transformer rated/inductive dimmers. 1m rubber input/output cables.
input/output dimensions ref no. VA output input cables (Ø x H) weight
ALV050G 50VA 12V 220/240V 1.0mm2 / 1.0mm2 63 x 90mm 0.9Kg
TOROIDAL LOW VOLTAGE OUTDOOR/GARDEN TRANSFORMERS
230V SELV IP 65
ELECTRONIC 3 BUTTON DIMMERS
RECESSED SHOWERLIGHTS
BATHROOM MIRROR LIGHTS
SHAVER SOCKET LIGHT
LOW VOLTAGE ROUND PRESSED STEEL UNDER CABINET DOWNLIGHTS
TRIANGULAR/WEDGE ALUMINIUM DISPLAY LIGHTS
101
102
103
104
108
110
112
113
115
117
118
120
121
114
SLIMLINE T4 & T5 LINKLIGHTS
T5 KITCHEN UTENSIL LIGHTS
TY
The Déluce Verdi lighting range offers an exciting new way of saving energy for all consumer applications, whether domestic, retail or commercial. Déluce Verdi provides 100% colour rendering (soft white light) via combination of both Halogen and LED technology, with the bonus of coloured mood lighting providing an added incentive for dimming and subsequent energy saving - in short this is the most exciting lighting development in years.
This product complies with the PART L Regulation in England, Wales and legislation in Scotland.
The Déluce Verdi range, aesthetically pleasing look combined with enormous energy saving potential.
BATH/SHOWER, KITCHEN & UTILITY
The Verdi LED/Halogen colour changing ceiling spot fitting is right
at the forefront of LED technology and blends simplicity with colour
mood enhancement perfectly.
Fitting includes 3 x GU10 50W lamps (230V - 50Hz) and an integral
LED colour mix (Satin Chrome finish as standard).
benefits:
• Mood enhanced
• Fully dimmable using infrared dimmer switch and remote control or a standard push on/push off rotary dimmer (each sold separately)
• No colour parallax error, full Halogen emulation
• Standard wiring using twin and earth
• Low running cost
max ref no. volts finish lamp watts
Dl401404 240V Satin Chrome 3x GU10 50 1x 8W LED
240V 0.5mIP 20 GU10
Kit includes:
• 2x 50W downlights (GU10 or GU5.3 c/w transformer & lamps)
benefits:
• Mood enhancement control
• Fully dimmable using infrared dimmer switch and remote control or a standard push on/push off rotary dimmer (each sold separately)
• 1 x LED fitting (IP68), zones 0 to 2, plus 50,000 hours LED life
• 2 x Halogen fittings (IP65), zone 2
• Fire and Acoustic Hood option available
• No colour parallax error, full Halogen emulation
• Standard wiring using twin and earth
• Low running cost
12V 0.5mIP 68
Dl401101 cH 12V Chrome 2x GU5.3 50 70mm
Dl401101 scH 12V Satin Chrome 2x GU5.3 50 70mm
Dl401101 Pb 12V Polished Brass 2x GU5.3 50 70mm
Dl401101 WH 12V White 2x GU5.3 50 70mm
loW VoltAge
Dl401401 cH 230V Chrome 2x GU10 50 70mm
Dl401401 scH 230V Satin Chrome 2x GU10 50 70mm
Dl401401 Pb 230V Polished Brass 2x GU10 50 70mm
Dl401401 WH 230V White 2x GU10 50 70mm
mAins VoltAge
electronic 250W 3 button inFrAreD Dimmers
ref no. Infrared finish
DlmD bss Yes Brushed Stainless Steel
DlmD b Yes Brass
DlmD WH Yes White
ref no. Infrared finish
DlsD bss No Brushed Stainless Steel
DlsD b No Brass
DlsD WH No White
DLMD PC DLMD BSS DLMD B DLMD WH
ref no. description
AccDl401001 RGB LED Driver
AccDl401156 RJB to RJB Splitter c/w 100mm Cable (allows use of 2x LED Downlights via one Driver)
AccDl401002 12V Transformer to suit ACCDL401004
AccDl401999 Bespoke Fire Hood to fit all Verdi Downlights
DLIRR
DL401999
Ø78
75
14 0
10 0
Ideally suited for the dimming of the Verdi Quad and Verdi downlight kits. This most flexible of designer dimmers will also operate any tungsten filament light source up to 250W.
Also available as 2 gang.
DlsPet4 cH RGB LED Downlight Kit Chrome 70mm
DlsPet4 WH RGB LED Downlight Kit White 70mm
ref no. description
AccDlsPlitter RJB to RJB CAT 5E Splitter c/w 100mm Cable -
AccDlsPetDr/rgb Spettro Dimmable RGB LED Driver -
DlsPet FH 1 Hour Rated Fire Hood 75mm
Accessories Ø85
Kit includes:
• 1 x LED programmable mood controller
• 2 x LED drivers c/w CAT 5E splitters, cables & full instructions
benefits:
• Fully dimmable using the Programmable Mood Controller
• 4 x RGB LED fittings (IP68), zones 0 to 2, plus 50,000 hours LED life
• Mood enhancement control
• Fire and Acoustic Hood option also available
• Up to 50 LED fittings can be installed on the same supply (controller must be fused at 6 Amps)
colour cHAnging rgb leD iP68 DoWnligHt Kit
FEATURES... the unique fully programmable mood controller, one of
the most sophisticated LED controllers available. Isolate, dim, time or
cancel all colours individually or scroll seamlessly through the rainbow
or sunrise/sunset effects. With the sequential colour mood setting
feature, each colour can be individually timed from 1 minute to 2 hours.
Colours: white, pink, blue, red, green, sunset/sunrise and rainbow.
ACCDLSPETDR/RGBDLSPET FH ACCDLSPLITTER
DlsPet1 cH Single RGB LED Fitting Chrome 70mm
DlsPet1 WH Single RGB LED Fitting White 70mm
single Fitting c/W DriVer
DlsPet2 cH Double RGB LED Fitting Chrome 70mm
DlsPet2 WH Double RGB LED Fitting White 70mm
Double Fitting c/W DriVer, cAble & sPlitter
ENERGY EFFICIENT ‘MOOD ENHANCEMENT’ FITTINGS
ADD-on rgb leD Kits
note:
Dedicated controller required if using either add-on kit as a stand alone system (Sold separately)
Images by kind permission of Coast, Arbroath and The Garrison Hotel, Sheffield.
710A-2 Dedicated Spettro Controller - Polished Chrome
710A-3 Dedicated Spettro Controller - Satin Chrome (Flat Plate)
230V
One of the most sophisticated LED controllers available. Isolate, dim,
time or cancel all colours individually or scroll seamlessly through the
rainbow or sunrise/sunset effects. With the sequential colour mood
setting feature, each colour can be individually timed from 1 minute
to 2 hours.
88 3.5
710A-1 710A-2 710A-3
rounD FixeD DoWnligHts
max ref no. colour diffuser lamp watts
1022WHgu10 White Glass/Clear GU10 50 80mm
1022Pbgu10 Brass Glass/Clear GU10 50 80mm
1022cHgu10 Chrome Glass/Clear GU10 50 80mm
max ref no. colour diffuser lamp watts
1022WH White Glass/Clear MR16 50 80mm
1022Pb Brass Glass/Clear MR16 50 80mm
1022cH Chrome Glass/Clear MR16 50 80mm
loW VoltAge mAins VoltAge
12V 240V GU5.3 GU10
ChoICe of fInIsh
DIE-CAST IP65 RECESSED SHOWERLIGHTS
DsHl scH Satin Chrome MR16 35 66mm
DsHl Pb Polished Brass MR16 35 66mm
max ref no. finish lamp watts
DsHl WHgu10 White GU/GZ10 35 66mm
DsHl cHgu10 Chrome GU/GZ10 35 66mm
DsHl scHgu10 Satin Chrome GU/GZ10 35 66mm
DsHl Pbgu10 Polished Brass GU/GZ10 35 66mm
DSHL MR16 DSHL GU10
DSHL CH
Ø78
62
26
Ø78
53
26
MR16
Features:
ChoICe of fInIsh
sHl scH Satin Chrome MR16 35 72mm
sHl Pb Polished Brass MR16 35 72mm
max ref no. finish lamp watts
sHl WHgu10 White GU/GZ10 35 72mm
sHl cHgu10 Chrome GU/GZ10 35 72mm
sHl scHgu10 Satin Chrome GU/GZ10 35 72mm
sHl Pbgu10 Polished Brass GU/GZ10 35 72mm
SHL MR16 SHL GU10
Features:
• c/w 35 Watt max MR16 lamp
loW VoltAge
BF12 PB
mAins VoltAge
240V
GU10 MR16
ChoICe of fInIsh All Blazefender Downlights are supplied with a paint finish protective cap.
Ø86
Ø63
90
21
• c/w 24W PL-L fluorescent lamp and pull cord
• Suitable for use in Bathroom Zone 3
• Adheres to Building Regulations Part L on energy efficiency
• Chrome plated body
• PMMA opal diffuser
DlKbm062 Bathroom light - pointed ends 2G11 24
DlKbm061 Bathroom light - scallop ends 2G11 24
60
500
100
60
590
100
Features:
• IP44 rated allowing indoor or outdoor use
• Steel body with tempered glass front
• Brushed nickel finish
F020302F020301
F020301 Single projecting wall light 1x GU10 35
F020302 Twin projecting wall light 2x GU10 35
DLMLT8
DLMLT5
Add an extra dimension to your bathroom with these backlit illuminated mirrors. The integral pull cord switch gives full independent control.
Features:
note: Other mirror options available on request.
240V
Dlmlt5 Mirror with x2 fluorescent lights T5 2 x 13W
Dlmlt8 Mirror with x2 fluorescent lights T8 2 x 15W
IP 44 T5/T8
• Integral pullswitch
70
240V 110V
WDVsl Dual voltage shaver socket & light S15s 60W
230V 115V 284mm
DllVguc/t Triangular Under Cabinet Light G4 20W
DllVguc/o Circular Under Cabinet Light G4 20W
DllVguc/s Square Under Cabinet Light G4 20W
loW VoltAge 12V Fitting
Low voLTaGe round PreSSed STeeL under CabineT downLiGHTS
BLISTER PACKED
3 light kits c/w transFormer
12V G4
Dl9kit sCh Satin Chrome G4 20w 58mm
Dl9kit PB Polished brass G4 20w 58mm
single Fittings
12V G4
Dl9 sCh Satin Chrome G4 20w 58mm
Dl9 PB Polished brass G4 20w 58mm
DL9 SCH
TRILITE DG
12V G4
trilite kitDg 3 x 20w Light Kit G4 20w
triliteDg Single Light Fitting G4 20w
loW Voltage 12V Fitting
trilite kit 3 x 20w Light Kit G4 20w
trilite Single Light Fitting G4 20w
12 8
128 40
12 8
128 4016
A
B
C
The déluce low energy T5 under Cabinet wall wash lights are available in 8w and 13w versions which come complete with built-in electronic ballast and lamps.
Features:
• energy Saving
• Long Lamp Life
The déluce range of under cabinet “sealed for life” cold cathode products are ideal for those installations where maintenance is an issue.
Supplied c/w 12v dC supply, lamps and connecting cables – Simply fit and forget!
Features:
DLUCC106/3
A
B
C
max dimensions (mm) ref no description watts A B C
Dl20168W T5 Cabinet wall wash 8w 347 85 35
Dl201613W T5 Cabinet wall wash 13w 575 85 35
240V T5
DluCC105/3 under Cabinet Light 5w 160 110 15
DluCC106/3 under Cabinet Light 6w 300 60 15
100-240V
baTH/SHower, KiTCHen & uTiLiTY
SLiMLine T4 LinKLiGHTS - 240v
The déluce slimline fluorescent lights come complete with link lead, diffuser, 2 types of fitting brackets, screws, fitting instructions and tube in a range of wattages and sizes from 6w to 30w. all are blister packed, except the 30w version which is boxed. They are ideal for interior use, under shelves, kitchen units, bedroom furniture, pelmets and in cabinets and bookcases.
The lamps are easily replaced if required (fig 1). The product is double insulated (do not earth) and the mains supply should be fused at 3 amps.
The fitting must be positioned so that the minimum distance between the lamp and any adjacent surface is 10mm. Fittings may be butt-linked (fig 2) or lead linked (fig 3) with the supplied lead or with a longer link lead (available separately). installed fittings may be moved longitudinally in their brackets, allowing linking at any stage of the installation. if butt-linking, ensure all brackets are fixed along a straight line.
WARninG: noT sUiTABLe foR Use in BAThRooMs
if in any doubt about fitting, consult a qualified electrician.
TYPICAL BRACKET FITTING
Fig 1
Fig 2
Fig 3
BRACKET TYPES
OVERALL LENGTH
• a maximum of 10 fittings may be linked together, or 100w per single circuit.
tlt6 T4 Triphosphor Tube 6w 220.5mm
tlt10 T4 Triphosphor Tube 10w 369.5mm
tlt16 T4 Triphosphor Tube 16w 468mm
t4 link leaDs For slimline Fittings
ref no description length
tl250ll Link Lead 250mm
tl6slF T4 Slimline Linklight 6w 277mm 22mm
230V~50Hz T4
TYPICAL BRACKET FITTINGS BRACKET TYPES
The déluce T5 fluorescent lights come complete with link lead, diffuser, 2 types of fitting brackets, screws, fitting instructions and tube in a range of wattages and sizes from 6w to 35w.
They are ideal for interior use, under shelves, kitchen units, bedroom furniture, pelmets and in cabinets and bookcases.
The lamps are easily replaced if required (fig 1).
The product is double insulated (do not earth) and the mains supply should be fused at 3 amps.
The fitting must be positioned so that the minimum distance between the lamp and any adjacent surface is 10mm.
Fittings may be butt-linked (fig 2) or lead linked (fig 3) with the supplied lead or with a longer link lead (available separately).
installed fittings may be moved longitudinally in their brackets, allowing linking at any stage of the installation. if butt-linking, ensure all brackets are fixed along a straight line.
WARninG: noT sUiTABLe foR Use in BAThRooMs
if in any doubt about fitting, consult a qualified electrician.
Fig 1
Fig 2
Fig 3
• a maximum of 10 fittings may be linked together, or 100w per single circuit.
max overall ref no description watts length width
Dl6Wt5 T5 Linklight 6w 279mm 28mm
230V~50Hz T5
an energy saving range of Led undercabinet surface mounting linklights. available in three lengths with standard cool white Leds.
These units are ideal for kitchen undercabinet lighting and with optional Led colours available, a seasonal or party atmosphere can also be created.
Features:
• c/w 1m cable
• Fixing brackets included
• optional Led colours available on request. (warm white, blue, green, red)
no of lumen ref no description LeDs output
DlleDt08 2.7w Led Cove Light - Cool white 47 92
230V IP 20 LED 36
A
35
ref no. description
CoVe light aCCessories
T5 KiTCHen uTenSiL LiGHTS
The déluce low energy T5 Kitchen utensil lights are available in 8w and 13w versions which come complete with hanging S hooks and lamps.
Features:
• Quick Start
• Flicker Free
• energy Saving
Dl20358W T5 Kitchen utensil Light 8w 582 140 90
Dl203513W T5 Kitchen utensil Light 13w 731 140 90
230V~50Hz T5
T5 WARDROBE LIGHTS
The déluce low energy T5 Picture lights are available in 8w and 13w versions which come complete with built-in electronic ballast and lamps.
Features:
• internal terminal block
Dl20488W T5 Picture Light 8w 365 133 120
Dl204813W T5 Picture Light 13w 593 133 120
230V~50Hz T5
Dl20198W T5 wardrobe Light 8w 705 106 33
Dl201913W T5 wardrobe Light 13w 933 106 33
230V~50Hz T5
A
B
C
The déluce low energy T5 wardrobe lights are available in 8w and 13w versions which come complete with built-in electronic ballast and lamps.
Features:
• energy Saving
TY
now available from Déluce Lighting, the “sLiM” range of stylish wall mounted luminaires.
• brushed nickel finish
• Can be supplied with electronic ballast on request
single ComPaCt FluoresCent Fitting
m20603 “SLiM 25” wall Light 1x 2G11 18
2G11
m20610 “SLiM 25” wall Light 1x G24 26
m20608 “SLiM 35” wall Light 2x G24 2x 18
G24
m20601 “SLiM 10” wall Light 1x G9 60
G9
70
100
70
250
70
350
70
450
ADJUSTABLE CIRCULAR RECESSED ALUMINIUM DOWNLIGHT KITS
ADJUSTABLE RECTANGULAR RECESSED ALUMINIUM DOWNLIGHTS
ASYMMETRICAL TANGO DOWNLIGHTS
The Déluce range of 240V compact fluorescent downlights with diffuser and reflector manufactured from polycarbonate and aluminium. Easy installation and maintenance, suitable for Loop-in, Loop-out installation.
The luminaires are also supplied complete with lamps.
Please note these luminaires are not dimmable.
Emergency option available - just add /E3 to ref no.
COMPACT FLUORESCENT FITTINGS
ref no. description cap
DLPDL118 1 x 18W c/w Control Gear G24q-2 4 Pin 216mm
RECESSED DOWNLIGHTS
Page 132
REC ESSED
O W
N LIG
H TS
Fluorescent downlight with integrated electronic ballast. For use with compact fluorescent lamps providing long lamp life and energy savings. Provided with white bezel trim, although a wide range of finishes and accessories are available.
DLcFL101 1 x 13W c/w white bezel trim G24-q1 4 Pin 98mm
DLcFL102 1 x 18W c/w white bezel trim G24-q2 4 Pin 98mm
ref no. description
DLcFL10aSN Plain Bezel Trim - Satin Nickel
DLcFL10aPc Plain Bezel Trim - Polished Chrome
DLcFL10aSS Plain Bezel Trim - Stainless Steel
DLcFL10Y Open Glass Trim - Yellow
DLcFL10W Open Glass Trim - White
DLcFL10B Open Glass Trim - Blue
DLcFL10F Floating Lens - Frosted/Clear Glass
DLcFL10R IP44 Round Closed Frosted Glass Trim
DLcFL10S IP44 Square Closed Frosted Glass Trim
240V IP 20
Compact fluorescent downlight with polycarbonate body and faceted aluminium reflector. With its three point easy installation fixing system, this downlight is suitable for display lighting in shops, offices, showrooms etc.
Low height enables fitting in low ceiling void. Available in single and twin lamp versions with a wide range of bezel accessories. Supplied with high frequency electronic ballasts as standard. Max ceiling thickness 20mm.
Emergency option available - just add /E3 to ref no.
cOmmERcIaL cOmPacT DOWNLIGHTS
DLcFL318S 1 x 18W Single Lamp Version G24-q2 4 Pin 233mm
DLcFL318T 2 x 18W Twin Lamp Version G24-q2 4 Pin 233mm
DLcFL326S 1 x 26W Single Lamp Version G24-q3 4 Pin 233mm
DLcFL326T 2 x 26W Twin Lamp Version G24-q3 4 Pin 233mm
DLcFL332S 1 x 32W Single Lamp Version GX24-q3 4 Pin 233mm
DLcFL332T 2 x 32W Twin Lamp Version GX24-q3 4 Pin 233mm
DLcFL342S 1 x 42W Single Lamp Version GX24-q4 4 Pin 233mm
DLcFL342T 2 x 42W Twin Lamp Version GX24-q4 4 Pin 233mm
240V 0.5mIP 20 G24-q2/3 GX24-q2/3
505mm
255mm
ref no. description depth
DLcFL39WGmW Die Cast Twist-Off Bezel Trim without Glass - Matt White 9mm
DLcFL39WGPc Die Cast Twist-Off Bezel Trim without Glass - Polished Chrome 9mm
DLcFL39WGSS Die Cast Twist-Off Bezel Trim without Glass - Stainless Steel 9mm
DLcFL39cGmW Die Cast IP65 Twist-Off Bezel Trim with Clear Glass - Matt White 9mm
DLcFL39cGPc Die Cast IP65 Twist-Off Bezel Trim with Clear Glass - Polished Chrome 9mm
DLcFL39cGSS Die Cast IP65 Twist-Off Bezel Trim with Clear Glass - Stainless Steel 9mm
DLcFL39FGmW Die Cast IP65 Twist-Off Bezel Trim with Frosted Glass - Matt White 9mm
DLcFL39FGPc Die Cast IP65 Twist-Off Bezel Trim with Frosted Glass - Polished Chrome 9mm
DLcFL39FGSS Die Cast IP65 Twist-Off Bezel Trim with Frosted Glass - Stainless Steel 9mm
DLcFL340cGmW Die Cast Twist-Off Bezel Trim with Clear/Frosted Floating Glass - Matt White 40mm
DLcFL340cGPc Die Cast Twist-Off Bezel Trim with Clear/Frosted Floating Glass - Polished Chrome 40mm
DLcFL340FGmW Die Cast Twist-Off Bezel Trim with Frosted/Clear Floating Glass - Matt White 40mm
DLcFL340FGmW Die Cast Twist-Off Bezel Trim with Frosted/Clear Floating Glass - Polished Chrome 40mm
DLcFL3aSR Replacement Aluminium Polished Reflector Single Lamp n/a
DLcFL3aTR Replacement Aluminium Polished Reflector Twin Lamp n/a
DLcFL3ES Blank Polycarbonate Drop Display Panel. Requires Bezel n/a (e.g. DLCFL39WGMW) and Legend Sticker (e.g. DLCFL3FT)
IP 65
IP 65
IP 65
IP 65
IP 65
IP 65
RECESSED DOWNLIGHTS
Page 135
RE C
ES SE
High quality range of compact fluorescent downlights and attachments. Lightweight and slim to suit small ceiling voids with a white bezel as standard.
Supplied c/w high frequency gear, plug and socket. Also available as Emergency and Dimmable versions - ask for details.
Features:
• Suitable for installation in both suspended and plasterboard ceilings
• Full range of attachments and optional extras available i.e. Emergency exit signs
• White powder coated metal body.
• Emergency option available - just add /E3 to ref no.
PROGRESSION DOWNLIGHTS
230V 0.5mIP 20 G24-q2/3 GX24-q3/4
PRODL118HF 1 x 18W High Frequency Fitting G24-q2 4 Pin 215mm
PRODL132HF 1 x 32W High Frequency Fitting GX24-q3 4 Pin 215mm
Ø233
O W
N LIG
H TS
A range of accessories to complement the Progression range of fittings.
Please note that the attachments with Pictograms are not available for the large fittings.
PRODLFR Floating Ring Attachment - Frosted Colour options available (please enquire)
PRODLIP44 IP44 Diffuser Attachment
PRODLIP65 IP65 Diffuser Attachment
PRODLWW Wall Washer Attachment
PRODLFDOF Floating Disc Attachment - Outer Frosted/Inner Clear
PRODLFDIF Floating Disc Attachment - Inner Frosted/Outer Clear
PRODL/E3F Pictogram Attachment - Female*
PRODL/E3m Pictogram Attachment - Male*
PRODL/E3XL Pictogram Attachment - Exit Left
PRODL/E3XR Pictogram Attachment - Exit Right
* Only available to special order
PRODLGB
PRODLCB
PRODLCAT2
PRODLIP65
PRODLIP44
PRODLFDC
PRODLWW
PRODLFR
High quality range of compact fluorescent downlights and attachments. Lightweight and slim to suit small ceiling voids with a white bezel as standard.
Supplied c/w high frequency gear, plug and socket. Also available as Emergency and Dimmable versions - ask for details.
Features:
• Full range of attachments available
• White powder coated metal body.
• Emergency option available - just add /E3 to ref no.
230V 0.5mIP 20 GX24-q3/4
Ø255
D O
W N
LI G
H TS
A range of accessories to complement the Progression range of fittings.
Please note that the attachments with Pictograms are not available for the large fittings.
PRODLFR/L Floating Ring Attachment - Frosted Colour options available (please enquire)
PRODLIP44/L IP44 Diffuser Attachment
PRODLIP65/L IP65 Diffuser Attachment
PRODLWW/L Wall Washer Attachment
PRODLGB
PRODLCB
PRODLCAT2
PRODLIP44/L
PRODLIP65
PRODLFDC
PRODLWW
PRODLFR
D O
W N
LI G
H TS
Professional 240V compact fluorescent downlights in polycarbonate or die-cast aluminium, the range is supplied c/w a whi

untitled - deluce lighting

Documents