university of central missouri state technical college of ... · cadd 1170 intro to cad 3 ddt 183 3...
TRANSCRIPT
University of Central Missouri – State Technical College of Missouri Transfer Guide - UCM 2019 Undergraduate CatalogDesign & Drafting Technology Major, B.S. Degree
Major Requirements 69-78 Sem. Hrs
UCM Course Credit Hrs
(B.S. Design & Drafting Technology)
State Tech. College of MO Equivalent Credit Hrs
CADD 1100 Orientation to Drafting 1 No DDT equivalent to UCM course
CADD 1110 Fundamentals of Drafting 3 DDT 150 3 CADD 1170 Intro to CAD 3 DDT 183 3 CADD 2100 Soph. Design/Drafting Seminar .5 No DDT equivalent to UCM course
CADD 2150 Descriptive Geometry 3 No DDTequivalent to UCM course
CADD 2160 Structural Drafting 3 DDT 252 3 CADD 2140 Adv. Parametric Modeling 3 No DDT equivalent to UCM course
CADD 2171 Intro to Microstation 3 No DDT equivalent to UCM course
CADD 2180 Technical Illustration 3 DDT 153 3 CADD 3100 Junior Design/Drafting Seminar .5 No DDT equivalent to UCM course
CADD 3120 Machine Drafting 3 DDT 151 & DDT 154 3 CADD 3150 Civil Drafting 3 DDT 111 3*
CADD 3160 Residential Architect. Drawing 3 DDT 230 3 CADD 3170 Computer Drafting Systems 3 No DDT equivalent to UCM course
CADD 3175 Advanced MicroStation 3 No DDT equivalent to UCM course
CADD 4100 Senior Design/Drafting Seminar 1 No DDT equivalent to UCM course
CADD 4180 Industrial Design 3 No DDt equivalent to UCM course
SOT 3022 Internship in Technology 1 DDT 163 1*
SOT 4570 Computer Graphics 3 No DDT equivalent to UCM course
CTE 3060 Technical Writing 3 COM 211 Technical Writing 3*
CMGT 2020 Statics 3 CVT 246 5 CMGT 3010 Applied Construction Practices 3 No DDT equivalent to UCM course
ENGT 2530 Machine Tool Technology 3 No DDT equivalent to UCM course
MATH 1112 College Trigonometry 2 MAT 121 Trigonometry 3
Electives from the following 6 Sem. Hrs
MGT 3315 Management of Organizations 3 and
HRM 3920 Human Resource Mgt 3 OR
INDM 4250 Project Management 3 and
SOT 4210 Innovations Management for CADD 3
Electives from one of the following areas (A minimum of 1-7 SH must be upper level**) 15 Sem. Hrs
Area 1 Mechanical (Product/Machine) Design Area 2 Architectural/Structural Area 3 MEP (Mech., Electrical, and Plumbing)
& Industrial Piping Systems
Area 4 Civil/GIS Area 5 Computer Graphics
Courses from the following MAY apply to the 15 hour elective
area depending upon emphasis area chosen by the student:
CCT 140 Surveying I /w Laboratory 3
DDT 163 Design Drafting Internship 1-5*
Additional courses from LSTC may apply as required or
elective major courses based upon an analysis of transcripts.
GENERAL EDUCATION REQUIREMENTS (courses listed below are Gen Ed. required by the major) 48 Sem. Hrs
MATH 1111 – 3 hrs = MAT 115 PHYS 1104 – 4 hrs = PHY 101 & 102
GEOS 1004 – 4 hrs (required for
Architectural and Civil/GIS areas)
CTE 1210 – 3 hrs = CPP 101
GEOS 2212 – 3 hrs (required by major)
Remaining Coursework at UCM (If LSTC courses listed above are taken)
Major Requirements 38-40
General Education Requirements 30
Total 68-70
MINIMUM TOTAL 120 Sem. Hrs *Courses taken at a two-year college will not be applicable toward upper-level credit requirements.
(A.A.S. Drafting & Design Eng. Technology)(B.S. Design & Drafting Technology)
**A baccalaureate must include a minimum of 30 semester hours of upper-level credit, 12 of which must be part of a major. Taking the following Gen Ed courses will allow you to meet this requirement: GEOS 3201 or POLS 3522, and COMM 3010.
FAST FACTS
A.A.S. D&D Eng. Technology to UCM Design & Drafting Technology Major, B.S. Degree
The following requirements are based on the UCM 2019 Undergraduate Catalog and represent minimum university requirements. Individual majors may have additional hours/residency/GPA requirements. This guide is
a recommendation only and your actual program may vary. Degree requirements are subject to change.
Overall Hours Required for a
Degree at UCM A minimum of 120 hours are required for a degree at UCM.
A minimum of 30 of these must be earned at UCM.
Upper-level Hours Required for
a Degree at UCM Upper-level hours consist of those courses taken at the 3000/4000 level.
Transfer courses from community colleges may articulate/substitute as
3000/4000 level.
30 overall hours of upper-level credits are required for graduation, 20
must be earned at UCM.
A major must contain a minimum of 12 upper-level credits, 9 of them
must be earned at UCM.
A minor must contain a minimum of 1 hour of upper-level credit earned at
UCM.
*(Courses taken at a two-year college MAY be articulated for an upper-
level course but WILL NOT count toward upper-level credit
requirements.)
Residency Hours Required for a
Degree at UCM
(minimum hours to be earned at
UCM)
A minimum of 30 hours towards a degree must be earned at UCM.
A minimum of 15 hours of a major must be earned at UCM. 9 hours of
upper-level credits in the major must be earned at UCM.
A minimum of 9 hours of the minor must be earned at UCM. At least 1
hour of upper-level credit must be earned at UCM.
General Education Assessment
(GEA) All UCM students are required to pass a General Education Assessment
test. Students transferring in more than 45 credit hours are required to
take the test during their first semester at UCM. Learn more about the
GEA at www.ucmo.edu/assessment/documents/gened_policy.pdf.
Minor Required This major does not require the completion of a minor. Students may add
a minor if they wish.
Modern Foreign Language
Required This degree does not require modern foreign language proficiency.
Grade Point Averages Required
for Graduation Students must achieve a minimum GPA of 2.00 in all grade point averages
to qualify for graduation. This includes cumulative GPA, UCM GPA,
major GPA, and minor GPA (if applicable). Some degree programs have
additional GPA requirements and/or require greater than a 2.00.
UCM Department Contact for
this major Dr. Roya Azimzadeh, Program Coordinator, [email protected]
(660) 543-4062, Grinstead 207E, Warrensburg, Missouri 64093
UCM Professional Academic
Advisors for this major Katie Bond (for last names A-G), [email protected]
Rachel Oglesby (H-O), [email protected]
Jacqueline Carter (P-Z), [email protected]
UCM Undergraduate Catalog Find the current UCM Undergraduate Catalog at
www.ucmo.edu/academics/catalogs.
UCM School of Technology Find more information about the School of Technology at
www.ucmo.edu/technology.
UCM Four Year Academic
Guide for this major View UCMs Four Year Academic Guide for this major at
http://catalog.ucmo.edu/preview_program.php?catoid=7&poid=1383
Apply to UCMhttps://www.ucmo.edu/future-students/
apply-to-ucm