united states of america mapa professional€¦ · the manufacturer must ensure that each...

Mapa Professional Catalog

www.mapa-pro.com

www.mapa-pro.com

A solution for every hand

that works

SummaryGeneral Information 02

Disposable 04Disposable gloves to protect hands and products during delicate work

Liquidproof Protection 08For prolonged contact with mildly aggressive liquids

Chemical Protection 14A solution for every situation, due to a complete range classified by polymer

Handling Protection 34To resist injuries endured during general handling work

Precision work Heavy-duty work

Cut Protection 40Solutions adapted to all hazardous cutting situations


Thermal Protection 48For high/low temperature environments involving hot/cold contacts

Critical Environments 54Specific solutions for controlling the environment in clean rooms or containment buildings

Controlled environments Confined environments

Reference Listing 58

General Information 60

UNITED STATES OF AMERICAMAPA PROFESSIONALDiv. of Jarden Safety & Security, Inc.2834 Schoeneck RoadMacungie, PA 18062-9679 USAToll Free: (800) 537-2897Fax: (800) [email protected]

CANADAMAPA PROFESSIONAL88B East Beaver Creek, Unit 6Richmond Hill, ONL4B 4W2 CANADAToll Free: (800) 265-5674www.mapa-pro.ca

your distributor:

KRY

for the job in hand, there is a Mapa gloveA

A

A decision-making aid

Choose your protective gloves in 4 steps:

Step 1

Identify your protection needs, with the help of the summary

found on the reverse of this page

Step 2

Define, with the help of the positioning tables, the family of gloves

which best meets your needs in terms of usage (performance,

comfort or environment)

Step 3

Make sure that the family of gloves chosen corresponds to your

Profession, and that its principal advantages meet your needs

Step 4

Select the most appropriate reference to meet your needs, with the help of the technical

characteristics table.

Directive 89/686/CEE stipulates the essential require-ments for marketing protective gloves within the Europe-an Union. The whole Mapa Professional range is certi�ed in compliance with these criteria, and is labelled with the CE-marking.

Certi�cation categories� Category 1: The manufacturer is responsible for the conformity of its products, with respect to the essential requirements of the Directive� Category 2: Certi�cate of conformity obtained from a noti�ed body� Category 3: Certi�cate of conformity and regular production inspections on the manufacturer’s premises by the noti�ed bodies

PictogramsThe following pictograms, de�ned according to European standards, can help you understand the performance characteristics of a glove:

MECHANICAL HAZARDSEN 388

GENERAL CHEMICAL PROTECTION EN 374

MICRO-ORGANISMS EN 374

RADIOACTIVE CONTAMINATION EN 421

COLD HAZARDS EN 511

PERFORMANCE LEVELS0-4 0-4 0 or 1

Water permeability Contact cold resistanceConvective cold resistance

HEAT AND FIRE EN 407

PERFORMANCE LEVELS0-4 0-4 0-4 0-4 0-4 0-4

Resistance to large quantities of molten metal Resistance to small drops of molten metal Radiant heat resistant Convective heat resistance Contact heat resistanceBurning behaviour

SPECIFIC CHEMICAL PROTECTION EN 374

Letter Code Chemical product

A MethanolB AcetoneC AcetonitrileD DichloromethaneE Carbon DisulfideF TolueneG DiethylamineH TetrahydrofuraneI Ethyl acetateJ n-heptaneK Sodium hydroxide 40%L Sulphuric acid 96%

European legislation and standards

Regulations relative to food contactEuropean directive 1935/2004/CEE, relative to materials and objects intended for contact with food, specifies that these materials must be inert. Only plastic materials are concerned, and it only applies to a very limited number of the gloves’ constituent materials (such as PVC).In the absence of a European directive applicable to the majority of the constituent materials found in protective gloves, such as nitrile or natural latex, national regulations apply.The manufacturer must ensure that each constituent is found on the positive list defined by national regulations, and check that local inertness criteria are respected.In Europe, test conditions and stimulants differ from one country to another, as well as the positive lists.Hence, Mapa refers to the American standard FDA 21CFR 177.2600.For certain countries, conformity to national legislation must also be obtained; for assistance, please contact our customer technical department.

PERFORMANCE LEVELS0-4 0-5 0-4 0-4

Puncture resistance Tear resistance Blade cut resistanceAbrasion resistance

more than a catalog.


61

Cut Protection > 40 Thermal Protection > 48 Critical Environments > 54Disposable > 04 Liquidproof protection > 08 Chemical protection > 14 Handling > 34

> Laundering your Gloves*:Some lined/supported MAPA gloves are launderable under certain conditions. Important: NEVER launder any gloves that have been in contact with toxic or corrosive chemicals.

• Washing:Watertemperature: 110° to 140°F (43° to 60°C)

• Detergent:Standardcommercial, avoid excess alkalinity

• Cycle:Normalgentle

• Time:Minimumtimerequiredto clean or sanitize

DryingyourGloves:

• DryerTemp:120°to140°F(50°to60°C)

• Time:Minimumasrequiredtodry

Additional considerations:

• Avoidexcessivewashtimeoragitation during washing/dryer

• DONOToverloadthewasherordryer,particularly with heavy and/or sharp objects such as pants withbuckles,zippers,etc.

• DONOTusebleach

• DONOTdrycleanusingsolvents

• Ifpossible,glovesshouldbeinverted (cufftofingertips)beforedrying

*NOTE:Thesearerecommendedlaunderingprocedures;howeverMAPAdoesnotguaranteechemicalormechanicalpropertiesoftheglovesfollowingtheseprocedures.

> Storage • Keepglovesinpolybaguntilused.Thiswillprotect

themfromcontaminationanddamage.

• Storeinacool,dryplaceinoriginalboxesaway fromdirectsunlight,artificiallightandhumidity. Storedbetween40°to95°F(5°to35°C).

• Naturalrubberglovesshouldbekeptfromheat sourcesandelectricequipmentproducingozone.

> Use and Removal• Whenputtingongloves,makesurehandsare

clean and dry.

• Inspectglovesforcracksandsnags. Donotuseglovesshowingsignsofwear.

• Don’tusethesamepairforlongperiods.

• Takethemoffregularly.

• Pay attention to chemical breakthrough times.

• Usetwopairsalternatelyifworkingforlongperiods.

• Foldoverthecuffendwhenworkingwithliquids.

• Washgloves(usingtheappropriatesolvent,orrunningwater,ifindicated)beforeremovingthem.

• Remove gloves without touching the external surface,eitherbypullingonthefingertips (using one glove to remove the other) or by grippingthecuffedgeandfoldingback,(turning them inside out while removing)

> Service MandateMAPAismorethanaleadingmanufacturerofprotectivegloves;we’rearenownedexpertinthefieldofprotectiontechnology.Wepartnerwithourcustomerstoprovideyouwiththecompleteprotectionsolutionsyourequire.

Ourdedicateddirectsalesforceisacriticalpartofourtotal solution approach to customer service. Comprised ofknowledgeable,service-mindedprofessionals,itoffersourcustomersawealthofinformation,productsupportand protection solutions.

GENERALINFORMATION

Care and Life ExpectancyWithpropercareandhandlingyourMAPAglovesofferyearsofservicelife. Hereareafewwaystomaximizelifeexpectancy:

Afor the job in hand, there is a Mapa glove

Mapa Professional have utilized all of their understanding of professions and associated risks, to provide solutions wherever hand protection is required. Due to their research and development facilities, Mapa Professional has perfected their products and increased their

innovations. New materials, processes and finishes... Mapa Professional gloves are designed to overcome the constraints of the professional and industrial world, as well as to meet increasing demands for protection and comfort.

1948

Creation of Mapa

1982

Start-up of production activities in Asia

1957

Manufacture of the �rst �ock-lined glove

1962

Manufacture of the �rst fabric-lined glove

1980

First glove with the multi-layer supported glove process

90COUNTRIES in which Mapa Professional gloves are sold

1997

Start-up of production activities in Mexico

2010

Jarden Safety & SecurityPurchases MAPA

1999

Acquisition of Mucambo (Brazil)

5 PRODUCTION FACILITIES ON 3 CONTINENTS CERTIFICATE ISO 9001


01

Sales of�ces Production facilities R&D facilities

1,0OO,OOOPAIRS OF GLOVES MANUFACTURED EVERY DAY

3R&D FACILITIES in France and in Malaysia, employing more than 60 technicians

02

Why opt for one type of wrist design rather than another?Because wrist designs are adapted according to the type of use and precise characteristics.

Safety cuffWrist protection, quick glove removal and good ventilation of the hand.

Knitted wristFitted to the hand and protects the wrist.

Straight cuffBetter hand ventilation.

Rolled cuffIncreased resistance to tearing when putting gloves on.

Scalloped cutLonger-lasting glove.

Understand the spe cific characteristics of a glove in order to make the best choice.> Anatomical or ambidextrous glove?

What shape, size or thickne ss? Answers:

A glove is called anatomical when there is one shape for the left hand and another for the right.

Ambidextrous gloves can be worn equally well on either hand; this is principally the case for thinner gloves.

> How to choose the appropriate exterior finish?

Glove sizes.This depends on the circumference of the user’s palm, and varies from size 5 to 11.To be comfortable during use, a glove needs to be the correct size.

Smooth

Understand the spe cific characteristics of a glove in order to make the best choice.> Anatomical or ambidextrous glove?

What shape, size or thickne ss? Answers:

03Mapa Professional Catalog

What is the purpose of each interior finish?

PowderedMakes it easier to put gloves on and take them off, without having to increase the Thickness of the glove.

ChlorinatedMakes it easier to put on and take off gloves, without increasing the Thickness and without using powder.Reduces the allergy risk of natural latex gloves.

Flocked Cotton-based textile Fibers, covering the inside of the gloves.Fleeced feel provides good absorption of perspiration.

Textile supportKnitted interior, made from cotton or synthetic materials for increased comfort.Particularly suited to extended tasks.

The different textile types:

CottonComfort, thermal insulation and absorption of perspiration.

PolyamideOptimized dexterity (fine, seamless).

Para-aramideCut and heat-resistant.

High density polyethyleneCut-resistant and optimized dexterity (HDPE).

Glove Length.They must be chosen in accordance with the risks associated with the handling circumstances, to give more or less protection to the forearm. They generally vary between 8” to 24” (22 to 60 cm).

Glove Thickness.This influences the user’s dexterity and the gloves performance. It varies from 4 to 40 mil (0,1 to 2.5mm).

The choice of exterior finish depends on the type of contact to which the users will be exposed. For example, for protection against certain products gloves can be smooth. In other situations, and in order to improve grip, Mapa Professional provides alternative styles of exterior finish.

Embossed texture Pebbled DotsReinforced grip

04 DIsPOsABLE

Disposable

Mapa Professional offers a range of disposable gloves to meet your needs, regardless of your working environment.

The use of different materials (vinyl, natural latex, nitrile and exclusive ‘tri-polymer’ formulas), makes it possible to optimize glove performance and ergonomics: flexibility, sturdiness, comfort etc.

Their ‘second skin’ effect allows them to maintain extreme tactile sensitivity for short-term tasks.

Take advantage of the whole range of disposable gloves:• Precision dexterity• Protection for hands and the products being handled• Rolled cuff to prevent tearing while ensuring the glove stays

in place on the arm• Adapted to be in contact with food according

to FDA 21 CFR 177.2600


DIsPOsABLE

for the job in hand, there is a Mapa glove

How can you refine your choice? Performance: This factor was assessed according to the material’s resistance to low-grade mechanical and/or chemical aggression.

Interior finishes: The various interior finishes (powdered/chlorinated) make it possible to adapt to the specific characteristics of applications, e.g. for food handling, a chlorinated glove is recommended (food safety and hygiene for ingredients).

Color: The use of different Colors is a response to the unique demands of certain sectors, and it enables visual checks by the assignment of a specific Color to each application, e.g. blue for the food industry.

Dimensions: Choosing the Length and Thickness of the glove makes it possible to factor-in the limitations related to the workstation: dexterity, resistance and forearm protection etc.

C o m f o r t

Pe

rf

or

ma

nC

e

POWDERED CHLORINATED

p.07

TRIPLE POLymER

NITRILE

PVC

TRIlites

p.06

p.06-07

Pylox PVC

Solo nitrile

The table below will help you identify the most suitable gloves for your needs.

A

06 DISPOSABLE

Pylox PVC> Hand-speci�c, curved-�nger design for low hand

fatigue, excellent �t.

Loose cuff design provides ventilation for cooling comfort.

Liquid-tight, performs well against acids, caustics, alcohols, aldehydes, oils and grease.

Applications

Automotive/mechanical industry Assembly of small parts

Mechanical industry Precision assembly

Other Industries Laboratory tests

Solo Ultra Nitrile> Excellent mechanical resistance,

ideal in oily environments

Textured grip offers added safety when working in wet and dry conditions

Applications

Automotive/mechanical industry Assembly of small oily parts

Food industry Handling of fatty foods

Laboratory Manufacturing of medicines

Local Authorities (Catering Services) Handling food products Preparing meals

Pylox V-5 PR Pylox V-5 LH RH

Material PVC PVC

Length (inches) 10.5” 10.5”

Thickness (inches) 0.005” (5 mil) 0.005” (5 mil)

Wrist Scalloped cuff Scalloped cuff

Color yellow yellow

Interior �nish Powdered Powdered

Exterior �nish Smooth Smooth

Size M L XL S M L

Packaging 24 pairs/box - 288 pairs/carton 100 LH or RH gloves/box

1000 LH or RH gloves/carton

Cat. 1

Cat. 3

performs well against acids,

Solo Ultra 997 Solo Ultra 980

Material Nitrile Nitrile

Length (inches) 10” 12”

Thickness (inches) 0.004” (4 mil) 0.008 (8 mil)

Wrist Rolled Cuff Rolled Cuff

Color blue blue

Interior �nish Chlorinated Chlorinated

Exterior �nish Smooth with pebbled �ngertips Smooth with pebbled �ngertips

Size 6 7 8 9 6 7 8 9 10 11

Packaging 100 gloves/box - 1000 gloves/carton 100 gloves/box - 1000 gloves/carton


DISPOSABLE

Solo Ultra 999

Material Nitrile

Length (inches) 12”

Thickness (inches) 0.004” (4 mil)

Wrist Rolled cuff

Color white

Interior �nish Chlorinated

Exterior �nish Smooth with pebbled �ngertips

Size 6 7 8 9

Packaging 100 gloves/box - 1000 gloves/carton

Solo Ultra Nitrile

TRIlites Tri-polymer

> Excellent mechanical resistance for light food handling

> Tri-polymer formula for protection against chemical splashes

Applications

Laboratory Manufacturing of medicines Pharmaceutical preparation Research, analysis, handling of precision parts Research, analysis, manipulation of precision parts,

optical processes

Worn alone or as an outer-glove

Suitable for all types of food

Excellent dexterity thanks to �exibility and reduced material thickness

Applications

Food industry Deboning poultry Food handling Food preparation Handling fruits and vegetables Handling of fatty foods Handling prepared foods Preparation and packaging

of fatty foods

Cat. 3

Cat. 3

TRIlites Grippy 983 TRIlites Grippy 993 TRIlites 994

Material Natural latex, neoprene and nitrile

Natural latex, neoprene and nitrile

Natural latex, neoprene and nitrile

Length (inches) 11.5” 10” 10”

Thickness (inches) 0.006” (6 mil) 0.006” (6 mil) 0.006” (6 mil)

Wrist Rolled Cuff Rolled Cuff Rolled Cuff

Color purple purple purple

Interior �nish Chlorinated Chlorinated Chlorinated

Exterior �nish Non-slip grip Non-slip grip Smooth with pebbled palm

Size 6 S 7 M 8 L 9 XL 6 S 7 M 8 L 9 XL 6 S 7 M 8 L 9 XL

Packaging 100 gloves/box 1000 gloves/carton

100 gloves/box 1000 gloves/carton

100 gloves/box or bag 1000 gloves/carton

08 LIqUIDPROOF PROTECTION

Liquidproof protectionMapa Professional Liquidproof gloves meet hand comfort and protection needs for all work involving liquids with a low chemical aggression factor: water, cleaning products, oily foods, etc.

To choose the most suitable product for your needs, take into account the gloves performance and comfort levels.

The performance level of a liquidproof glove is directly linked to its Thickness. The thicker it is, the sturdier it is; therefore, it protects for longer.

Light protection: Gloves of minimal Thickness provide protection for applications in light aggressive environments (e.g. dry foods, cleaning products, water, etc.)

Standard protection: These gloves provide moderate protection for applications in aggressive environments (e.g. fatty foods, aggressive detergents, etc.)

High-level protection: Thick gloves provide protection for applications in very aggressive environments (e.g. handling heavy, slippery or rough objects; concentrated detergents, etc.)

Quick tips to simplify your choice: performance levels comfort criteria


LIqUIDPROOF PROTECTION

In terms of ‘comfort’, the gloves are displayed from least to most comfortable. several factors were considered when determining this ranking:

Interior finish: The interior finish of the glove should be chosen based on the Length of time it will be worn. For example, for long-term wear, (8hrs), it will be preferable to choose a glove with textile support to

limit the effects of perspiration.

Suppleness and flexibility: These two characteristics are directly linked to glove Thickness: the thicker a glove is, the less supple

it will be. e.g. for long-term wear, (8 hrs), it is preferable to choose a supple glove that will reduce fatigue in the hand.

C o m f o r t

Pe

rf

or

ma

nC

e

SHORT-TERm uSE(Chlorinated interior finish)

INTERmITTENT uSE(Flocked interior finish)

CONTINuOuS uSE(Textile support)

p.12-13

p.12

Level 3

HIgH-LEVEL PROTECTION

Level 2

STANDARD PROTECTION

Level 1

LIgHT PROTECTION

p.10

Pylox

Classics

p.11

Harpon

p.10

Sure-Grip Blue Grip

Quick tips to simplify your choice: performance levels comfort criteria



A

10 LIQUIDPROOF PROTECTION10

Pylox V-10> Hand-speci�c, curved-�nger design for low hand fatigue, excellent �t.


Liquid-tight, performs well against acids, caustics, alcohols, aldehydes, oils, and grease.

Applications



Other industries Biotechnology Wood working

Sure-Grip LF-128

Cat. 1

Cat. 3

1010

*The gloves are adapted to be in contact with food according to FDA 21CFR 177.2600

Pylox V-10

Material PVC

Length (inches) 10.5”


Wrist Scalloped cuff

Color yellow

Interior �nish Powdered

Exterior �nish Smooth

Size S M L XL

Packaging 12 pairs/box - 144 pairs/carton

Sure-Grip LF-128

Material Natural latex


Thickness (inches) 0.020 (20 mil)

Wrist Straight cuff

Color yellow

Interior �nish Flocked

Exterior �nish Embossed texture

Size 7 8 9 10 11

Packaging 12 pairs/bag - 144 pairs/carton

1010

> Dexterity and �exibility adapted to contact with food

Excellent dexterity: a thin glove in a supple material

Flocked interior provides added comfort for extended wear

Suitable for contact with food products

Applications

Food industry Canning Cheese-making Deboning poultry Filleting Fish Food preparation Handling fruits and vegetables

Local Authorities (Cleaning) Handling household detergents


LIQUIDPROOF PROTECTION

Classics L-200> Dexterity and �exibility adapted to contact with food


Chlorinated �nish for better protection of products being handled


Applications


Classics L-210> Dexterity and �exibility adapted to contact with food


Chlorinated �nish for better protection of products being handled


Applications


Cat. 3

1120


Classics L-210




Wrist Straight cuff

Color natural

Interior �nish Smooth chlorinated

Exterior �nish Embossed texture, chlorinated

Size 6 7 8 9 10 11


Classics L-200




Wrist Straight cuff

Color blue

Interior �nish Smooth chlorinated

Exterior �nish Embossed texture, chlorinated

Size 7 8 9 10 11


Cat. 3

1010

12 LIQUIDPROOF PROTECTION12

Blue-Grip LL-301

Harpon 326

> Maximum comfort for long-term work in aggressive environments

Freedom of movement, due to the anatomical shape and excellent comfort from the textile support

Good tear-resistance

Good resistance to many diluted acids and bases

Applications

Aeronautics industry Work with composite

materials (resins)

Food industry Handling frozen products Oyster farming Preparation and packaging

> Comfort and safety when gripping heavy, rough or slippery objects in food industry

Suitable for long-term wear, due to the comfort of a textile support and good thermal insulation

Optimized service life: high resistance to abrasion

Reinforce grip for better handling

Applications

Fishing Fish-handling Handling fresh, slippery products

Food industry Oyster farming

Cat. 2

4131

X2XXXX


Cat. 2

3141

X1XXXXBlue-Grip LL-301


Length (inches) 12”-13” (depending on size)

Thickness (inches) 0.045 (Hvy. Wt.)


Color blue

Interior �nish Textile support

Exterior �nish Non-slip grip

Size 6 S 7 M 8 L 9 XL

Packaging 1 pair/bag - 48 pairs/carton

Harpon 326


Length (inches) 12.5



Color blue


Exterior �nish Reinforced grip

Size 7 8 9 10




Harpon 321> Comfort and safety when gripping heavy,

rough or slippery objects in highly aggressive environments

Suitable for long-term wear, due to the comfort of a textile support and good thermal insulation

Optimized service life: high resistance to abrasion

Fishing Oyster farming Fish-handling Work with frozen products

Applications

Harpon 321




Color orange



Size 7 8 9 10


Cat. 2

4131

X2XXXX

Reinforced grip for better handling

due to the comfort of a textile support

: high resistance to abrasion

Cat. 2

4131

X2XXXX

Reinforced grip

321

14 CHEMICAL PROTECTION

Chemical ProtectionChemical hazards are not confined to the chemical industry. Many people in a variety of sectors, are faced with chemical risks when handling less aggressive products, such as oils, acids, solvents, etc. More than 100,000 chemical substances are now classified, and can be identified, due to their unique CAS numbers. The table below highlights the performances of different materials on a few major substances. For more information visit www.mapa-pro.com.

Choosing a glove that will provide the appropriate protection for each application is a complex task, requiring the consideration of a certain number of parameters, such as: the chemical family of the product handled, the contact time, the level of dexterity required, the associated risks, etc.

In order to meet the diversity of hazardous situations that exist, Mapa Professional propose a wide range of protective gloves designed using polymers, which, due to their intrinsic nature, will behave differently with respect to the same chemical product.

You are handling CAS EN374 PVC Latex Nitrile Neoprene Butyl FluoroelastomerAlcohols [methanol 100%] 67-56-1 A � � � � � � � � � � �

Ketones [acetone 100%] 67-64-1 B � � � � � Nitriles [acetonitrile methyl cyanide 99%] 75-05-8 C � � � � �

Chlorinated solvents [methylene chloride/dichloromethane 99%] 75-09-2 D � �

Sulphur-based chemicals [carbon disulphide 100%] 75-15-0 E � � � � �

Aromatic solvents [toluene 100%] 108-88-3 F � � � � � � �

Amines [diethylamine 98%] 109-89-7 G � � �

Ethers [tetrahydrofurane (THF) 100%] 109-99-9 H � � � �

Esters [ethyl acetate 99%] 141-78-6 I � � � � � �

Aliphatic solvents [heptane 99%] 142-82-5 J � � � � � � � � � �

Alkalies [sodium hydroxide (soda) 40%] 1310-73-2 K � � � � � � � � � � � � � � � � �

Oxidizing acids [sulphuric acid 96%] 7664-93-9 L � � � � � � � � � � � � � � �

Some common products

Butoxy-2-propanol 100% 5131-66-8 � � � � � � � � �

Acetic acid 10% 64-19-7 � � � � � � � � � � � � � � � � �

Benzene 99% 71-43-2 � � � � � �

Cutting, lubricating or hydraulic oils � � � � � � � � � � � � �

Methyl methacrylate 100% 80-62-6 � � � � �

Methyl Ethyl Ketone (butanone) (MEK) 100%] 78-93-3 � � � � �

N,n-dimethylacetamide 99% 127-19-5 � � � � � � � �

Methyl tert-butyl ether (MTBE) 100% 1634-04-4 � � � �

2,4-Toluene-diisocyanate (TDI) 100% 584-84-9 � � � � � � � � � �

Select the most appropriate glove for your needs, using the three stages below:• Stage 1: Identify which family of chemical

products the substance you are handling belongs to. You can use the material safety data sheet provided by the chemical manufacturer to help identify this family. (The principal component of the substance should indicate the correct family).

• Stage 2: Refer to the table opposite to determine the most appropriate protec-tive material for your speci�c application.

• Stage 3: Consult the pages correspond-ing to this family of material to choose your gloves.

Did you know?To characterize the performance of the elastomers and plastics used to manufacture safety gloves, tests are carried out to determine the behaviour of the materials when confronted with the various families of chemical products. The tests measure:• The permeation time for a given chemical product, i.e.

the time taken for the chemical to penetrate the glove at a molecular level. In some cases, there is no visible deterioration of the glove.

• The degradation index of the glove in contact with a given chemical product, i.e. the degree of deterioration of the glove, shown by an alteration of its physical properties (e.g. softening, hardening, etc.)

Mapa Professional takes these different parameters into account to determine the relative performance of the different families of gloves, and hence helps you to make the best possible choice.


CHEMICAL PROTECTION

You are handling CAS EN374 PVC Latex Nitrile Neoprene Butyl FluoroelastomerAlcohols [methanol 100%] 67-56-1 A � � � � � � � � � � �

Ketones [acetone 100%] 67-64-1 B � � � � � Nitriles [acetonitrile methyl cyanide 99%] 75-05-8 C � � � � �

Chlorinated solvents [methylene chloride/dichloromethane 99%] 75-09-2 D � �

Sulphur-based chemicals [carbon disulphide 100%] 75-15-0 E � � � � �

Aromatic solvents [toluene 100%] 108-88-3 F � � � � � � �

Amines [diethylamine 98%] 109-89-7 G � � �

Ethers [tetrahydrofurane (THF) 100%] 109-99-9 H � � � �

Esters [ethyl acetate 99%] 141-78-6 I � � � � � �

Aliphatic solvents [heptane 99%] 142-82-5 J � � � � � � � � � �

Alkalies [sodium hydroxide (soda) 40%] 1310-73-2 K � � � � � � � � � � � � � � � � �

Oxidizing acids [sulphuric acid 96%] 7664-93-9 L � � � � � � � � � � � � � � �

Some common products

Butoxy-2-propanol 100% 5131-66-8 � � � � � � � � �

Acetic acid 10% 64-19-7 � � � � � � � � � � � � � � � � �

Benzene 99% 71-43-2 � � � � � �

Cutting, lubricating or hydraulic oils � � � � � � � � � � � � �

Methyl methacrylate 100% 80-62-6 � � � � �

Methyl Ethyl Ketone (butanone) (MEK) 100%] 78-93-3 � � � � �

N,n-dimethylacetamide 99% 127-19-5 � � � � � � � �

Methyl tert-butyl ether (MTBE) 100% 1634-04-4 � � � �

2,4-Toluene-diisocyanate (TDI) 100% 584-84-9 � � � � � � � � � �

PAGE24

PAGE30

PAGE32

PAGE16

PAGE18

PAGE20

Specific polymers

This target protection against certain families of aggressive

chemicals. They are generally more expensive than common materials.

�Light protection

� � �Optimal protection

MAPA’S RECOMMENDATION

For more information visit www.mapa-pro.com

Common polymers

The most frequently used materials for chemical

protection gloves.


A

16

PVC

Principal qualitiesPVC, or polyvinyl chloride, provides good resistance to numerous acids and alkalis, and is associated with good mechanical resistance where the gloves are lined with fabric. PVC does not contain allergens such as proteins or accelerators, and so is well-tolerated by users.

PVC is a material that ages well, as it is not affected by prolonged exposure to light, ozone, UVs, etc. PVC gloves can therefore be stored for a long time without any alteration in their properties.

PVC gloves are not recommended for situations where they may come into contact with chemical solvents (ketones, alkanes, etc.). Contact with these products leads to the extraction of the plasticisers, and, as a result, the glove stiffens.

PVC gloves must not be used for handling hot parts (>180°F), to avoid their deterioration.

PVC < CHEMICAL PROTECTION

Pylox V-5 PR or LH/RH Dispenser> Hand-speci�c, curved-�nger design for low hand fatigue, excellent �t.


Liquid-tight, light weight, provides maximum dexterity.

Applications




Cat. 1

Pylox V-5 PR Pylox V-5 LH RH

Material PVC PVC



Wrist Scalloped cuff Scalloped cuff

Color yellow yellow

Interior �nish Powdered Powdered


Size M L XL S M L

Packaging 24 pairs/box288 pairs/carton

100 LH or RH gloves/box1000 LH or RH gloves/carton




Medium weight protection against acids, caustics, alcohols, aldehydes, oils, and grease.

Applications




Cat. 1Cat. 1

Pylox V-20

Material PVC




Color yellow



Size S M L XL


CHEMICAL PROTECTION > PVC

The gloves are adapted to be in contact with food according to FDA 21CFR 177.2600



Maximum protection against acids, caustics, alcohols, aldehydes, oils, and grease.

Applications




Cat. 1Cat. 1

Pylox V-20

Material PVC




Color yellow



Size L XL


18

Natural latex

Two-Tone NS-53> Excellent choice for light chemical protection

Tactile sensitivity, due to the gloves reduced thickness

Comfort and perspiration absorption, due to the cotton �ock lining

Good grip, due to the non-slip embossing

Principal qualitiesNatural latex offers exceptional flexibility and elasticity. Gloves made from natural latex adapt to the shape of the hand, thus maximising the user’s dexterity and comfort.

This polymer offers good mechanical performance, even with minimal Thickness. In particular, it has good tear and puncture resistance, and it offers good resistance to numerous acids, alkalis, alcohols and ketones.

It also has the advantage of staying supple in cold environments.

N.B.: In certain rare cases, the proteins found in natural latex can cause allergic reactions. In this event, we recommend the use of synthetic materials for sensitised users, such as a nitrile (p.20) or neoprene (p.24) glove.

Natural latex is not recommended for use in contact with oils, greases, petroleum products, strong oxidizing acids and aromatic or chlorinated solvents. The properties of natural latex can be deteriorated by prolonged exposure to light, UV or ozone.

Natural latex < CHEMICAL PROTECTION

Automotive/mechanical industry Spray-painting

Aeronautics Work with composite materials

(resins)

Construction industry Finishing work, jointing, etching

Other industries Industrial cleaning, maintenance

Applications

Two-Tone NS-53

Material Neoprene and Natural Latex



Wrist Straight cuff

Color blue and yellow



Size 6 7 8 9 10


Cat. 3

2120


CHEMICAL PROTECTION > Natural latex

ProTector AFR-282> Excellent choice for light chemical protection

Tactile sensitivity, due to the gloves reduced thickness.

Flock lining provides Comfort and perspiration absorption.

Embossed chain grip prevents �uids and greasy solids build-up on working surface.

Applications

Aeronautics industry Work with composite materials (resins)

Automotive/mechanical industry Spray-painting

Local Authorities (Cleaning) Handling household detergents

Other industries Cleaning and general maintenance

in wet environments

Trident 286, 287> Excellent mechanical performance for longlasting chemical protection

Longer service life and good impact protection, due to the thickness of the material

Forearm protection. Length: 18” & 23”

Applications

Chemical industry Chemical product blending Cleaning tanks

Other industries Cleaning and general

maintenance in wet environments

Petroleum industry Handling

Cat. 3

2131 ABKL

Trident 286 Trident 287

Material Natural latex Natural latex



Wrist Rolled cuff Rolled cuff

Color black black



Size 9 10 11 9 10 11

Packaging 1 pair/bag - 24 pairs/carton 1 pair/bag - 12 pairs/box

Cat. 3

2120

ProTector AFR-282

Material Natural latex blended nitrile



Wrist Straight cuff

Color blue/green



Size 6 7 8 9 10


286

287

20

Nitrile

Principal qualitiesNitrile, or Acrylo nitrile butadiene rubber (NBR), generally offers very good resistance to oils, greases and hydrocarbon derivatives, as well as aromatic or chlorinated solvents.

Nitrile also gives excellent abrasion and puncture resistance. It does not contain any proteins and has a very low accelerator content, therefore, it is very well-tolerated by users, paticularly for long-term wear.

On the other hand, nitrile is a naturally rigid elastomer. Thick nitrile gloves may limit dexterity.

In addition, they are not recommended for cold environments (<‑40°F), since these temperatures cause nitrile to stiffen, which makes the glove more difficult to use. Note, that nitrile is not recommended for prolonged contact with ketones, strong oxidizing acids, esters or aldehydes.

Nitrile < CHEMICAL PROTECTION

C o m f o r t

PerformanceThe thicker the glove, the long-er the protection.Level 1: Thin = splash protection.Level 2: Medium Thickness = good protection for frequent contact with chemicals.Level 3: Thick gloves = excellent protection for prolonged con-tact with chemicals (even in immersion).

Comfort• The first criteria is interior

finish. This should be chosen according to the Length of time the glove is worn. For example, for long-term wear (8hrs), it is preferable to choose a glove with an inner cotton lining, to limit the ef-fects of perspiration.

• The second criteria is the suppleness and flexibility of the glove. The thicker the glove, the less supple it is. For long-term wear (8hrs), it is preferable to choose a sup-ple glove that will limit hand fatigue.

Pe

rf

or

ma

nC

e

SHORT WEAR(Chlorinated interior finish)

INTERmITTENT WEAR(Flocked interior finish)

mAPA uLTRA COmFORT

TECHNOLOgy(Textile support)

Level 3

PROLONgED CONTACT

Level 2

FREquENT CONTACT

Level 1

SPLASH- PROTECTION

p.21

StanSolv Lite

p.21

Optinit

p.23

StanSolv Heavy

p.23

StanSolv Medium

p.22

Stansolv AK-22

p.22

StanSolvFlocked



Optinit 472> Fingertip precision for light chemical protection

Freedom of movement and excellent sensitivity, due to the gloves reduced Thickness (inches)

Chlorinated �nish for better protection of the products being handled

ingertip precision for light chemical protection

protection of the products being handled

Optinit 472

Material Nitrile



Wrist Straight cuff

Color blue


Exterior �nish Pebbled

Size 6 7 8 9 10

Packaging 10 pairs/bag 100 pairs/carton

CHEMICAL PROTECTION > Nitrile

Mechanical industry Handling and assembly of small oily parts Machining parts using cutting oil Precision assembly

Other industries Spray-painting Food industry*

Applications

Cat. 3

3001

StanSolv Light Weight> Fingertip precision for light chemical protection

Freedom of movement and excellent sensitivity, due to the gloves reduced thickness

Chlorinated �nish for better protection of the products being handled

Stansolv A-487 Stansolv A-10


Length (inches) 12.5” 13”

Thickness (inches) 0.012 (12 mil) 0.011 (11 mil)

Wrist Straight cuff Straight cuff

Color green green


Exterior �nish Embossed texture Embossed texture, chlorinated

Size 7 8 9 10 11 6 7 8 9 10 11

Packaging 12 pairs/bag - 72 pairs/carton 12 pairs/bag - 72 pairs/carton

Mechanical industry Assembly of small, oil and

grease free parts Machining parts using cutting oil Precision assembly

Other industries Food industry Spray-painting

Applications

Cat. 3

3101 JKL


Cat. 3

3101

A10

22 Nitrile < CHEMICAL PROTECTION

Stansolv AK-22> Maximum comfort for

standard chemical protection

Extremely supple, due to the unique Mapa Professional multi-layer process

Embossed texture for better grip of wet objects

Added comfort and thermal insulation, due to the cotton-knit lining

Automotive/mechanical industry Automotive assembly Part degreasing Surface treatment

Chemical industry Chemical product blending Handling drums of chemical products Manipulating valves

Other industries* Laboratory tests Machine maintenance

Applications

Stansolv AK-22

Material nitrile

Length (inches) 14”Thickness (inches) Medium Weight


Color green

Interior �nish Mapa technology textile support


Size 7 8 9 10 11


Cat. 3

X1XXXX

3121 JKL

StanSolv Flocked Lined> Good mechanical resistance and

long-lasting chemical protection

Dexterity and comfort, due to the anatomical shape and the quality of the �ock-lining

Longer service life: excellent mechanical resistance (abrasion, perforation)

Automotive/mechanical industry Machining parts using cutting oil Treating/degreasing metals with solvents

Chemical industry Manufacture and application of paints

and varnishes

Construction Industry (Carpenters/Joiners) Handling PVC-based glues Preparing coatings, varnishes

Construction Industry (Masons/Plasterers) Cleaning tools

Applications

StanSolv AF-15 StanSolv AF-492 StanSolv AF-18 StanSolv AF-493

Material Nitrile

Length (inches) 12” 12.5” 13” 15 .5”

Thickness (inches) 0.015” (15 mil) 0.015” (15 mil) 0.018 (18 mil) 0.022 (22 mil)

Wrist Straight cuff

Color green



Size 7 8 9 10 11 7 8 9 10 11 6 7 8 9 10 11 8 9 10 11


12 pairs/bag 72 pairs/carton



Cat. 3

4101 AJKL

standard chemical protection

due to the unique Mapa

better grip of wet objects

and thermal insulation,

Material

Length (inches)

Thickness (inches)

Wrist

due to the anatomical shape and the quality

4101



CHEMICAL PROTECTION > Nitrile

StanSolv Unlined Medium Weight> Excellent comfort and dexterity despite the high mechanical strength

Chlorinated �nish provides easy on/off.

Nitrile compound provides unsurpassed resistance to snag,puncture, abrasion and cuts.

Automotive/mechanical industry Automotive assembly Handling oily mechanical parts Part degreasing

Chemical industry Handling and transporting che-

micals (solvents)

Food industry Food handling Food preparation

Mechanical industry Assembly of small oily parts

Applications

StanSolv 489 StanSolv A-15 StanSolv A-490

Material Nitrile Nitrile Nitrile

Length (inches) 13” 13” 12.5”

Thickness (inches) 0.015 (15 mil) 0.015 (15 mil) 0.015 (15 mil)

Wrist Straight cuff Straight cuff Straight cuff

Color blue green green

Interior �nish Chlorinated Chlorinated Chlorinated

Exterior �nish Embossed texture Non-slip grip Embossed texture

Size 7 8 9 10 11 6 7 8 9 10 11 7 8 9 10 11




Cat. 3

4101

StanSolv Unlined Heavy Weight> Unique Z-pattern grip provide secure handling of hard-to-grasp items

Optimized service life: excellent mechanical resistance (abrasion, perforation)

Excellent protection during intensive handling of high-risk chemical products

Automotive/mechanical industry Treating/degreasing metals with aggressive solvents

Chemical industry Handling drums of chemical products

Mechanical industry Etching/degreasing

Other industries* Application of pesticides Cleaning of printing-press rollers Maintenance

Applications

olv Unlined Heavy Weight

Cat. 3

4102 AJKL


StanSolv A-14 StanSolv A-18





Color green green


Exterior �nish Embossed texture Embossed texture

Size 7 8 9 10 11 7 8 9 10 11

Packaging 12 pairs/box 48 pairs/carton

12 pairs/carton

lv Unlined Medium Weight

4101

PerformanceThe thicker the glove, the longer the protection lasts.Level 1: Thin = splash protection.Level 2: Medium Thickness = standard protection for frequent contact with chemicals.Level 3: Thick = excellent pro-tection for prolonged contact with chemicals (even immersion).

Comfort• The first criteria is interior

finish. This should be chosen according to the Length of time the glove is worn. For example, for long term wear (8hrs), it is preferable to choose a glove with an inner cotton lining, to li-mit the effects of perspiration.

• The second criteria is the suppleness and flexibility of the glove. The thicker the glove, the less supple it is. For long-term wear (8hrs), it is preferable to choose a supple glove, which will limit hand fatigue.

24

Neoprene

Principal qualitiesExtremely supple with excellent resistance to chemical contact, neoprene is an outstanding multi-purpose polymer. Neoprene offers good chemical resistance to acids, alkalis, oils, greases, alcohols, petroleum products, ketones, aliphatic solvents and numerous industrial gases and vapors). In addition, it is a supple material enabling dexterity and comfort.

It has excellent thermal properties, with contact insulation (hot or cold), and fire resistance (suitable for applications in proximity to flames). It also ages well, since it does not suffer from any deterioration, due to prolonged exposure to light, ozone, UV, etc.

On the other hand, we should point out that neoprene has poor mechanical properties when heavily stressed in chemical environments. In those conditions, a thick glove with a cotton lining is recommended, since this reinforces the mechanical properties of the glove, and therefore, its durability. Neoprene is not appropriate for prolonged contact with strong oxidizing acids and aromatic or chlorinated solvents, since these rapidly damage neoprene.

Neoprene < CHEMICAL PROTECTION

C o m f o r t

Pe

rf

or

ma

nC

e

SHORT WEAR(Chlorinated interior finish)

INTERmITTENT WEAR(Flocked interior finish)

CONTINuOuS WEAR

(Textile support)

mAPA uLTRA COmFORT

TECHNOLOgy(Textile support)

Level 3

PROLONgED CONTACT

Level 2

FREquENT CONTACT

Level 1

SPLASHES PROTECTION


p.29

Chem-Ply

p.25

Technic NS-420 NS-450

p.29

StanZoil NK-22

p.26

StanZoil

p.25

TechnicNS-401

ChemZoil

p.28


Technic NS-401 & NS-420

Technic NS-450

> Tactile sensitivity for light chemical protection

Added comfort, due to the cotton �ock-lining

Great dexterity, due to the glove’s reduced Thickness

Good grip on slippery objects, due to the embossed texture

> Comfort with light chemical protection

Freedom of movement, due to the quality of the neoprene and the comfort of the cotton �ock-lining

Embossed texture provides excellent grip

Longer length provides forearm protection

Automotive/mechanical industry Battery manufacturing Spray-painting

Other industries Industrial cleaning, maintenance Preparation of industrial glues

Applications

Automotive/mechanical industry Battery, pump, and compressor manufacturing

Chemical industry Handling and transporting chemicals

Other industries Industrial cleaning, maintenance Timber treatment

Applications

Technic NS-401 Technic NS-420

Material Neoprene and natural latex Neoprene and natural latex




Color black black

Interior �nish Flocked Flocked

Exterior �nish Embossed texture Embossed texture

Size 6 7 8 9 10 11 6 7 8 9 10 11

Packaging 12 pairs/bag - 72 pairs/carton 12 pairs/bag - 72 pairs/carton

Technic NS-450

Material Neoprene and natural latex



Wrist Straight cuff

Color black



Size 6 7 8 9 10 11


CHEMICAL PROTECTION > Neoprene

Cat. 3

2110 AKL

Cat. 3

3121 AJKL

26

StanZoil NL-52> Excellent chemical resistance with enhanced rough grip

Soft, absorbent interlock knit cotton liner adds comfort, easy on-off, high-and low-temperature protection.

1.5 AQL - Quality Assurance

Exclusive two-tone wear indicator system.

Neoprene < CHEMICAL PROTECTION

Chemical industry Handling and

transporting chemicals

Mechanical Industry Etching/degreasing

Petroleum Industry Handling

Applications

StanZoil NL-34> Excellent chemical resistance with enhanced rough grip

Soft, absorbent interlock knit cotton liner adds comfort, easy on-off, high-and low-temperature protection.

1.5 AQL - Quality Assurance

Exclusive two-tone wear indicator system.

Chemical industry Handling and transporting chemicals

Mechanical industry Maintenance in wet environments (water, oil, greases,

hydrocarbons)

Petroleum industry Handling

Applications

Cat. 3

1121

Cat. 3

3121 X2XXXX

StanZoil NL-52

Material Neoprene with natural rubber layer


Thickness (inches) Medium weight


Color black/blue



Size 8 9 10 11


StanZoil NL-34

Material Neoprene


Thickness (inches) Medium weight

Wrist Straight cuff

Color black/blue



Size 6 7 8 9

Packaging 12 pairs/box - 72 pairs/carton

Cat. 3

3121


StanZoil NK-22> Maximum comfort

for standard chemical protection

Extremely supple, due to the unique Mapa Professional multi-layer process

Embossed texture for better grip on wet objects

Added comfort and thermal insulation, due to the cotton-knit lining

SPECIFIC FEATURES:Two gloves in one, for better resistance: a unique process superimposing 2 materials, optimizing the chemical resistance and creating unrivalled glove �exibility.


Automotive/mechanical industry Engine part assembly Surface treatment

Chemical industry Chemical product blending Handling drums of chemical products Manipulating valves

Other industries Laboratory tests Machine maintenance

Applications

StanZoil NK-22

Material Neoprene

Length (inches) 14"

Thickness (inches) Medium Weight

Color blue



Size 7 8 9 10 11


Cat. 3

X1XXXX

2121 ACJKL

Neoprene < CHEMICAL PROTECTION2828

ChemZoil NL-339> Comfort and high-level chemical protection

Superior chemical resistance against acids and alkalis, such as concentrated hydro�uoric acid, oils, and greases, due to its 100% neoprene multi-layer construction

Pebbled embossing, for better grip on wet and slippery objects

Excellent mechanical resistance and longer service life, due to the textile support and the Thickness of the glove

Thermal insulation from the cotton-knit lining for handling hot liquids

SPECIFIC FEATURES:Designed using an exclusive anatomical shape, ChemZoil gloves offer excellent �t and exceptional comfort, even when worn for long periods. The pre-curved �ngers provide unrivalled freedom of movement, for this high-risk chemical protection glove.

Mechanical industry Surface treatment of metals (acids)

Chemical industry Handling on alkylation units Hot, petrochemical product sampling Resin-working Handling and transporting drums of chemical products Site pollution control

Applications ChemZoil NL-339

Material Neoprene


Thickness (inches) Heavy Weight


Color black



Size 8 9 10 11

Packaging 1 pair/bag 6 pairs/carton

X1XXXX

Cat. 3

3221 ABCJKL



Chem-Ply> Ultra-high performance chemical protection

Broad chemical resistance (acids, aliphatic solvents, solvent mixtures), increased by the Thickness of the material

Good grip, due to embossed texture

Easy to pull on and off, due to chlorinated interior

SPECIFIC FEATURES:The two neoprene layers superimposed increase the mechanical and chemical resistance.The glove red inner layer ensures that any wear is clearly visible, providing optimal safety for the user.

Mechanical industry Surface treatment of metals (acids) Etching / degreasing

Chemical industry Handling on alkylation units Galvanoplasty Handling and transporting drums of chemical products Site pollution control

Applications

Chem-Ply N-360 Chem-Ply N-440 Chem-Ply N-540 Chem-Ply N-730 Chem-Ply N-740

Material Neoprene Neoprene Neoprene Neoprene Neoprene

Length (inches) 14” 14” 14” 18” 18”

Thickness (inches) 0.022 (22 mil) 0.030 (30 mil) 0.040 (40 mil) 0.022 (22 mil) 0.030 (30 mil)

Wrist Straight cuff Straight cuff Straight cuff Straight cuff Straight cuff

Color black black black black black

Interior �nish Chlorinated Chlorinated Chlorinated Chlorinated Chlorinated

Exterior �nish Embossed texture Embossed texture Embossed texture Embossed texture Embossed texture

Size 9 10 11 9 10 11 9 10 11 9 10 11 9 10 11

Packaging 6 pairs/box 48 pairs/carton

6 pairs/box 48 pairs/carton

6 pairs/box 48 pairs/carton 12 pairs/carton 12 pairs/carton

Cat. 3

3112 ABCJKL

30

Butyl

Principal qualitiesButyl offers excellent chemical resistance against ketones, acids, esters and amine derivatives. It is a supple and elastic synthetic material, allowing the user to retain dexterity if the material is not too thick. As it is quite expensive, butyl is classed as a special-purpose polymer, reserved for applications requiring very high, targeted, chemical protection.

NB: butyl has poor mechanical properties when heavily stressed in chemical environments. In those conditions, a thick glove, with a cotton lining is recommended, since this reinforces the mechanical properties of the glove, and therefore its durability. In addition, butyl is not appropriate for prolonged contact with aromatic or chlorinated solvents, as these provoke rapid deterioration of the material.

Butyl < CHEMICAL PROTECTION

*Breakthrough time: according to permeation tests carried out in MAPA laboratories, on the palm of the hand at 85°F.**Level: Permeation index (a high index corresponds to a long chemical breakthrough time).

Did you know:Butyl is an excellent barrier to industrial gases and vapors, as well as chemical war agents. The military favor this material for their combat clothing.

Chemical performance Butoflex

Product Family EN 374 stan-dard

Breakthrough* time

(mins)Level**

Methanol Alcohols A > 480 6Acetone Ketones B > 480 6Acetonitrile Nitriles C > 480 6Ethyl acetate Esters I 162 4Caustic soda 40% Alkalis K > 480 6Sulphuric acid 96% Acids L > 480 6 Ammoniac Gas > 480 6Chlorine Gas > 480 6Hydrogen chloride Gas > 480 6


Buto�ex 650 & 651

CHEMICAL PROTECTION > Butyl

> Ultimate speci�c chemical resistance

Exceptional comfort; the �rst butyl glove on the market with a fabric inner lining (ref. 650)

Ultimate speci�c chemical resistance, for very corrosive acids, ketones, esters and amine derivatives

Unrivalled �exibility and dexterity

Chemical industry Formulating paints, varnishes, resins and inks Handling and repackaging chemicals Sampling chemicals

Cosmetics and Pharmaceutical industry Handling in laboratories

Mechanical and Electronic industry Metal treatment and degreasing

ApplicationsButo�ex 650 Buto�ex 651

Material Butyl


Thickness (inches) Medium weight 0.025 (25 mil)

Color black


Chlorinated


Size 7 8 9 10


ABCIKL

Cat. 3

1122 (650)

0111 (651)

SPECIFIC FEATURES:The only Butyl glove on the market with an exclusive embossed exterior �nish, meaning slippery objects can be handled without risk.

650

SPECIFIC FEATURES:

32

Fluoroelastomer

Principal qualitiesFluoroelastomer, a high performance polymer, is recommended for prolonged contact with aromatic solvents, sulphur-based chemicals and amines.

The Mapa Professional multi-layer technology creates an especially supple fluoroelastomer glove, with high chemical resistance.

Fluoroelastomer is an expensive material. It is classed as a special-purpose polymer, reserved for applications requiring very high, targeted, chemical protection.

Beware: fluroelastomer is not recommended for prolonged contact with ketones, organic acids and acetates.

Fluoroelastomer < CHEMICAL PROTECTION

Chemical performance Fluonit 468 Fluotex 344

Product Family EN 374 standard

Breakthrough* time

(mins)Level**

Breakthrough* time

(mins)Level**

Methanol Alcohols A 114 3 218 4

Acetonitrile Nitriles C 17 1 46 2

Dichloromethane Chlorinated solvents D 66 3 37 2

Carbon disulphide sulphur based chemicals E > 480 6 > 480 6

Toluene Aromatic solvents F > 480 6 > 480 6

Diethylamine Amines G 77 3 76 3

n-Heptane Aliphatic solvents J > 480 6 > 480 6

soda 40% Alkalis K > 480 6 > 480 6

sulphuric acid 96% Acids L > 480 6 > 480 6

Ammoniac Gas NT NT > 480 6

Chlorine Gas NT NT > 480 6

Hydrogen chloride Gas NT NT > 480 6

*Breakthrough time: according to permeation tests carried out in MAPA laboratories, on the palm of the hand at 85°F.**Level: Permeation index (a high index corresponds to a long chemical breakthrough time).NT = not tested


Fluonit 468

Fluotex 344

CHEMICAL PROTECTION > Fluoroelastomer

> Tactile sensitivity with wear-indicator

Excellent �exibility and Thickness optimisation, due to the Mapa Professional multi-layer technology: good dexterity and comfort

Nitrile inner layer: excellent mechanical resistance and a longer service life

Green inner layer: wear-indicator for greater user safety

> Comfort and �exibility for extended wear

Excellent comfort for long tasks, due to the cotton-knit interior

High mechanical resistance and long service life, due to textile support

Freedom of movement: good glove �exibility

Mechanical industry Metal degreasing and etching

Chemical industry Manufacturing paints

and varnishes Chemical treatments (solvents) Galvanoplasty

Resin and adhesive manufacturing

Handling and transporting chemicals (solvents)

Other industries Printing Petrochemical refining Site pollution control

Applications

Mechanical industry Metal degreasing and etching

Chemical industry Manufacturing paints and

varnishes Chemical treatments (solvents) Galvanoplasty

Resin and adhesive manufacturing

Handling and transporting chemicals (solvents)

Other industries Printing Petrochemical refining Site pollution control Emergency interventions on

chemical accidents

Applications

Fluonit 468

Material Fluoroelastomer



Color black



Size 8 9 10

Packaging 1 pair/carton

Fluotex 344

Material Fluoroelastomer


Thickness (inches) Heavy weight

Color black



Size 9 10

Packaging 1 pair/carton

ADEF GJKL

Cat. 3

4102

Cat. 3

X1XXXX

4241 ACDE FGJKL

34 HANDLING PROTECTION

Handling Protection

Gloves for heavy-duty work

Performance levelsThe performance level of a heavy-duty work glove corresponds to its ability to protect the user from knocks and shocks.

A thicker glove absorbs shocks better, and hence gives better protection. In addition, a thicker range is sturdier, and so gives longer-lasting protection.

To help you select the most appropriate gloves, we have categorised the heavy-duty work range into 3 levels of performance:

Level 1: Light protection for applications in light aggressive environments (e.g. handling light, mildly abrasive objects in dry and reasonably clean environments)

Level 2: standard protection for applications in aggressive environments (e.g. handling moderately abrasive objects in oily or wet environments)

The Mapa Professional Handling Protection range provides the comfort and protection hands require to carry out a wide variety of work. This range is divided into two distinct classes, helping you to choose the most appropriate type of protection for your specific application:

• Gloves for precision work are recommended for applications that require protection from mechanical hazards, without compromising dexterity.

• Gloves for heavy-duty work meet the need for long-term protection associated with a high degree of mechanical resistance.

Performance levelsThe level of performance of a precision work glove corresponds to its durability, which is directly linked to the Thickness of the polymer layer covering the fabric, and the nature of this polymer.> The thicker the coating, the longer the glove lasts.

In addition, the nature of the polymer coating in the fabric will affect how long a glove will last in a given environment.> A polyurethane coating is recommended in dry and

reasonably clean environments, whereas a thicker nitrile coating is more appropriate for handling in oily and dirty environments.

To help you select the most appropriate gloves, we have categorised the precision work range into 3 levels of performance:

Level 1: Gloves providing light protection for applica-tions in dry and reasonably clean environments.

Level 2: Gloves providing standard protection for ap-plications in dry and dirty environments

Level 3: Gloves providing long-lasting protection for applications in oily and very dirty environments.

Comfort criteriaFor precision work, glove comfort depends on the ability to let the hand breathe, and hence limit the effects of perspiration.


HANDLING PROTECTION

Level 3: High-performance protection for applications in very aggressive environments (e.g. handling heavy, slippery or rough objects in oily or very dirty environments).

Comfort criteriaThe comfort criteria chosen for this heavy duty range are the elasticity and flexibility of the glove.

A supple glove reduces hand fatigue; for long-term wear (8hrs) on a workstation where frequent opening / closing occurs, a more flexible glove is recommended.

Gloves for precision work

A gloves capacity to breathe is defined by the Thickness of the polymer layer covering the fabric, and by the coat-ing technology used; depending on the technology, the coating is either more or less liquid-proof, and therefore increases or reduces the gloves ability to let out perspira-tion.

The level of comfort of the glove should be chosen based on the Length of time it will be worn. For exam-ple, for long-term wear (8hrs), a glove with better breath-ing capacity is preferable.

C o m f o r t

Pe

rf

or

ma

nC

e

Level 3

LONg- LASTINg

PROTECTION

Level 2

STANDARD PROTECTION

Level 1

LIgHT PROTECTION

p.36

Ultrane

p.36

Ultrane Lite

p.37

Ultrane Performance

C o m f o r t

Pe

rf

or

ma

nC

e

Level 3

LONg- LASTINg

PROTECTION

Level 2

STANDARD PROTECTION

Level 1

LIgHT PROTECTION

p.38Titanlite

p.38

Enduro

p.39

Titan

p.39

Enduro Grip

ENHANCED gRIP


A

36

Ultrane Lite> Optimal dexterity and sensitivity for light

protection

Thin glove: excellent tactile sensitivity Absorption of perspiration ensured by the cellular structure of the polyurethane. In addition, the particularly open texture of the speci�c lining helps improve hand ventilation

Anatomical shape: close �t for precision

Ultrane> Unbeatable for �ngertip precision

Excellent abrasion resistance: longer lasting

Excellent tactile sensitivity, due to reduced glove Thickness

Absorption of perspiration ensured by the cellular structure of the polyurethane

Added comfort, due to the seamless knit lining

Automotive/mechanical industry Intricate assembly Sorting small parts Fitting small screws and fasteners

Electronics Assembly of electrical components Microprocessor handling

Cosmetics and Pharmaceutical industry Medicine manufacturing Cosmetics preparation

Automotive/mechanical industry Intricate assembly Sorting small parts Fitting small screws and fasteners

Electronics Electronic component assembly (displays, LEDs, etc.) Microprocessor handling High-frequency antennae riveting

Cosmetics and Pharmaceutical industry Medicine manufacturing Cosmetics preparation

Ultrane 548

Material Seamless textile support

Length (inches) 8.25” - 10.25” (depending on size)

Color black

Exterior �nish Ventilated back, polyurethane coating on palm and �ngers

Size 6 7 8 9 10 11


Ultrane 550 Ultrane 551



Color white gray

Exterior �nish Ventilated back, polyurethane foam coating on palm and �ngers

Size 6 7 8 9 10


Precision work < HANDLING PROTECTION

Applications

Applications

3121

Cat. 2

4131 (550-551)

Cat. 2 (550-551)

551


Ultrane Performance> Unbeatable for �ngertip precision in dirty

and oily environments

Excellent abrasion resistance: longer-lasting

Nitrile coating resistant to greasy or oily dirt particles

Excellent tactile sensitivity and freedom of movement, due to the reduced Thickness (inches) of the glove

Back partially coated for improved protection (Ref. 562)

Ultrane 546 Ultrane 553 Ultrane 562



Color black black black

Exterior �nish Ventilated back, foam nitrile coating on palm

and �ngers

Ventilated back, nitrile coating on palm

and �ngers

Nitrile coating with dot embossing on palm, �ngers

and partially on back

Size 6 7 8 9 10 6 7 8 9 10 7 8 9 10



HANDLING PROTECTION > Precision work

Automotive/mechanical industry Metal part assembly Screwing and bolting Pump manufacturing Precision assembly Sorting small parts

Other industries Minor maintenance tasks Light handling in storage areas Packaging activities

Applications

4121

Cat. 2

SPECIFIC

FEATURES:Dot embossing for better grip (Ref. 562)

nbeatable for �ngertip precision in dirty

to greasy or oily dirt particles

and freedom of movement, due to the reduced Thickness (inches) of the glove

improved protection

4121

Cat. 2

553

38

Enduro 327 & 328> Flexibility and grip for common handling tasks

Exceptionally comfortable fabric lining, and seamless knit

Good ventilation Excellent grip, due to

embossed texture

Titanlite GPA-397> Comfort and dexterity for common handling tasks

Excellent comfort, due to the Thickness of the cotton lining and the ventilated back

Freedom of movement: dexterity and �exibility, due to the close �t to the hand

Excellent service life: good abrasion resistance

Construction industry Fibreboard handling Construction material handling

Environment Household waste collection Public park maintenance

Other industries Warehousing and receipt of goods

Automotive/mechanical industry Precision mechanical work Part assembly Sanding Handling oily mechanical parts

Other industries Manufacturing small electrical components Construction materials handling

Titanlite GPA-397

Material Textile support

Length (inches) 9.5”-12” (depending on size)

Thickness (inches) Light to medium weight

Color yellow

Exterior �nish Ventilated back, smooth nitrile coating on palm and �ngers

Size 6 7 8 9 10


Cat. 2

2142

Cat. 2

4121

Applications

Applications

X2XXXX

Enduro 327 Enduro 328

Material Seamless textile support Seamless textile support

Length (inches) 9.5”-11” (depending on size) 9.5”-11” (depending on size)

Color blue and gray orange and yellow

Exterior �nish Natural latex anti-slip coating on palm and �ngers

Natural latex anti-slip coating on palm and �ngers

Size 6 7 8 9 10 7 8 9 10


1 pair/bag 96 pairs/carton

Precision work < HANDLING PROTECTION


Titan> Comfort and durability

for heavy-duty work

Freedom of movement: exceptionally comfortable textile support (no seams on the working surfaces)

Excellent resistance to oils and greases

Longer service life: quality of textile support and nitrile coating

Enduro 330> Comfort, reinforced safety and excellent grip in wet or dry environments

Exceptionally comfortable textile support (no seams on the working surfaces)

Excellent �exibility of natural latex

Good thermal insulation

Titan 385 Titan 388 Titan 391 Titan 392

Material Textile support with nitrile coating

Length (inches) 9.5”-11” (depending on size) 9.5”-11” (depending on size)

Thickness (inches) Medium to heavy weight

Color blue blue blue blue

Exterior �nish ventilated back fully-coated ventilated back fully-coated

Wrist safety cuff knitted

Size 8 9 10 8 9 10


Enduro 330


Length (inches) 9.5”-11” (depending on size)

Wrist Knitted wrist

Color green



Size 6 7 8 9


Mechanical industry Handling of thick, untrimmed sheet metal (not sharp-edged) Metal shearing or cutting

Construction industry Construction material handling (concrete, bricks, structural steelwork) Metal construction

Other industries Household waste collection Forestry

Applications

Cat. 2

4111

Cat. 2

Environment Forestry Handling barbed wire Public park maintenance Waste collection

Food industry Fruit picking Harvesting

Local Authorities (Parks and Public Spaces) Plant treatment products

Applications

knitted cuff (Ref. 391/392)

knitted cuff

Cat. 2

2141 X2XXXX

385

HANDLING PROTECTION > Precision work

40 LIQUIDPROOF PROTECTION

40 CUT PROTECTION

Cut Protection

The Mapa Professional Cut Protection range provides excellent comfort and protection to hands, speci�cally adapted for work involving cut hazards.

Select your cut protection gloves according to your speci�c needs:

• For precision work, you need gloves that act like a second skin, giving protection against cuts whilst maintaining excellent dexterity.

• For heavy-duty work, your gloves must provide protection against cuts and impacts, and must be tough and long-lasting.

Fact:Comfort, ergonomics, dexterity and safety are the principal needs expressed by users, especially for cut protection.

To combine all these qualities in a Cut Protection glove, new Fibers have been developed: High Density Polyethylene Fibers (HDPE). HDPE Fibers make it possible to improve comfort and dexterity without diminishing the level of protection.

Other technical Fibers, such as para-aramide Fibers, also provide a higher level of cut protection.

Comment

The use of Cut Protection gloves does not guarantee total protection (e.g. when a motor-operated sharp object is used). An on-site study is recommended to determine the most appropriate type of protection for a workstation. Do not hesitate to contact our technical department for further information.

ANSI/ISEA 105

for the job in hand, there is a Mapa gloveP R O F E S S I O NNEL



E N V I R O N M E N T

PE

RF

OR

MA

NC

E

DRY / SLIGHTLY OILY OILY / VERY DIRTY

HIGH- PERFORMANCE PROTECTION

STANDARD PROTECTION

Krytech 586

Krytech 579 557

Krynit (Ultrane)

559

Krynit 563 Krytech

(Ultrane)560


PE

RF

OR

MA

NC

E

OILY / VERY DIRTY

WET / DIRTY

PROTECTION FOR INTENSIVE USAGE

PROTECTION FOR MODERATE USAGE

Kromet 832

Kroflex 840

Kronit-Proof 395

LONG-LASTING LIQUID-PROOF PROTECTION

METAL BURRS

SPECIAL PURPOSE FOR WET

ENVIRONMENTS

SLIGHTLY WET / DIRTY

WET / COLD

Krytherm 585

ALL-IN-ONELINER CUT AND COLD

PROTECTION

Krynit 582

41CUT PROTECTION

Precision work (All the products in the range)

Heavy-duty work (All the products in the range)

Environment Select the glove that meets your needs according to your working environment. On the left of the above table, gloves that are ideal for dry and

reasonably clean environments. Then moving towards the right, gloves that are increasingly effective in contact with oils and greases.

Environment Select the glove that meets your needs according to your working environment. On the left of the above table, gloves that are ideal for dry and reasonably clean environments. Then moving

towards the right, gloves that are increasingly liquid-proof for handling in wet environments. Note: the Kronit-Proof glove is 100% liquid-proof according to the EN 374 standard.

PerformanceThe higher the level of perfor-mance, the greater the gloves resistance to the combined effects of the sharpness of a cutting edge and the pressure applied.Standard protection In situations where exposure could cause slight cuts e.g. han-dling small sharp objects: filings, broken glass, cardboard, light metal parts, etc. (Level 1-2 ac-cording to ANSI/ISEA standard).High-performance protection In situations where exposure could cause serious/permanent injury e.g. handling extremely sharp objects: cutting blades, glass, etc. (Level 4 according to ANSI/ISEA standard).

PerformanceThe higher the level of perfor-mance, the more the glove resists the combination of para-meters: sharpness of the cutting edge, pressure applied, contact frequency and abrasiveness of the objects handled.Protection for moderate usage Gloves providing level 1 to 2 resistance against cuts according to ANSI/ISEA standard. These knitted gloves allow the skin to breathe more easily. They are recommended for continuous use in situations where the objects handled are only mildly abrasive e.g. using a safety knife or handling untrimmed sheet metal.Protection for intensive usage These gloves, providing level 3 to 4 resistance against cuts accor-ding to ANSI/ISEA standard, have been coated or are multi- layered to improve their resis-tance to frequent contact with sharp or abrasive objects. As a re-sult, they have a longer service life e.g. repeated handling of heavy and rough, sharp-edged parts.


PE

RF

OR

MA

NC

E


PE

RF

OR

MA

NC

E

KRY


PE

RF

OR

MA

NC

E

DRY / SLIGHTLY OILY OILY / VERY DIRTY

HIGH- PERFORMANCE PROTECTION

STANDARD PROTECTION

Krytech 586

Krytech 579 557

Krynit (Ultrane)

559

Krynit 563 Krytech

(Ultrane)560


PE

RF

OR

MA

NC

E

OILY / VERY DIRTY

WET / DIRTY

PROTECTION FOR INTENSIVE USAGE

PROTECTION FOR MODERATE USAGE

Kromet 832

Kroflex 840

Kronit-Proof 395

LONG-LASTING LIQUID-PROOF PROTECTION

METAL BURRS

SPECIAL PURPOSE FOR WET

ENVIRONMENTS

SLIGHTLY WET / DIRTY

WET / COLD

Krytherm 585

ALL-IN-ONELINER CUT AND COLD

PROTECTION

Krynit 582


A

42

Krytech

Krynit

> Standard protection for intricate handling in reasonably clean environments

Suitable for long-term wear: excellent abrasion resistance

Excellent dexterity: anatomical shape

Ergonomic to reduce fatigue in the hand

> Standard protection for intricate handling in oily environments

Excellent resistance to oils and greases

Suitable for long-term wear

Total hand protection (Ref. 559)

Krytech 557 Krytech 560 Krytech 579

Material Polyurethane Polyurethane Polyurethane

Length (inches) 8” - 10” (depending on size) 8.75” - 10” 8.5” - 10.25”

Thickness (inches) Medium Duty Medium Duty Medium Weight

Wrist Knitted wrist Knitted wrist Knitted wrist

Color gray gray white

Interior �nish Seamless textile support from HDPE �bers

Seamless textile support from HDPE �bers

Seamless textile support from HDPE �bers

Exterior �nish Polyurethane on palm & �ngers Fully-coated Ventilated back

Size 6 7 8 9 10 7 8 9 10 11 6 7 8 9 10 11

Packaging1 pair/bag

48 pairs/carton1 pair/bag

48 pairs/carton1 pair/bag - 12 pairs/bag

96 pairs/carton

ANSI cut level 1 - 287g 1 - 479g 1 - 379g

Krynit 563 Krynit 559

Material Seamless textile support from HDPE Fibers


Color black black

Exterior �nish Nitrile on palm and �ngers Complete nitrile coating

Size 7 8 9 10 11 8 9 10 11



ANSI cut level 2 - 734g 1 - 355g

Automotive/mechanical industry Handling and sorting small,

sharp parts Finishing work

Paper industry Handling cardboard and paper Using safety knives

Applications

Automotive/mechanical industry Mechanical maintenance Stacking oily panels Pressing metal, handling metal sheets

Paper industry Handling cardboard and paper Using safety knives

Environment Waste collection and handling

Applications

4343

4343

Cat. 2

Cat. 2

Precision work < CUT PROTECTIONKRY

563


Krytech Performance> High-performance protection for intricate

handling in reasonably clean environments

Optimal cut resistance, ANSI level 4

Excellent dexterity due to the precise �t

Added comfort and �exibility

A visible indicator in blue textile to easily identify the cut-performance level in the workplace

Automotive/mechanical industry Handling metal parts Assembly of thin metal sheets Finishing sharp parts

Plastics industry Post-injection material removal

Applications

Cat. 2SPECIFIC FEATURES:Uses HDPE Fibers ensuring excellent cut resistance with reduced Thickness for good dexterity.

Krytech 586

Material Polyurethane

Length (inches) 9.5” - 11.5”

Thickness (inches) Heavy duty

Wrist Knited wrist

Color gray


Exterior �nish Ventilated back

Size 6 7 8 9 10 11

Packaging 1 pair/bag - 12 pairs/bag 48 pairs/carton

ANSI cut level 4 - 1835g

CUT PROTECTION > Precision work

4543

KRY


44 Precision work < CUT PROTECTION

Krynit 582> High-performance protection for intricate

handling in reasonably clean environments

Special coating Grip&Proof from nitrile for a better liquidproofness to oily contact.

Optimal cut resistance: ANSI level 4

Excellent resistance to abrasion: Better lifetime

External layer given a good grip even in oily environment

A visible indicator in blue textile to easily identify the cut-performance level in the workplace

Automotive/mechanical industry Mechanical maintenance Pressing metal, handling metal sheets Sorting small parts Stacking oily panels

Glass industry Handling glass sheets

Other industries Maintenance in wet environments Maintenance

Applications

Cat. 2

Krynit 582

Material Nitrile Grip & Proof coating

Length (inches) 9” - 10.5”

Thickness (inches) Heavy duty

Wrist Knited wrist

Color black



Size 7 8 9 10 11



4543


KRY


Kro�ex 840

Kromet 832

> Ultra-high protection for handling heavy or sharp objects in wet environments

Highest protection level against cuts

Good thermal insulation of the hand

Good grip for picking up parts safely, due to embossed texture

Good puncture-resistance

> Ideal protection for handling heavy and sharp metal parts in oily environments

Added comfort, due to the gloves anatomical shape and the �exibility of the material

Good grip for picking up parts safely in oily environments, due to external leather layer

Long service life even when faced with untrimmed metal

Excellent thermal insulation of the hand

Glass industry Handling glass sheets

Ceramic and plastics industry

Post-injection handling of hot plastic parts Handling of composite materials after heat processing

Applications

Automotive/mechanical industry Handling untrimmed parts Handling parts post-press Handling sheet metal Metal working Cutting strips (plasma etc.)

Applications

Kro�ex 840

Material Seamless textile support from superior strength Fibers


Color blue

Exterior �nish Latex grip on palm / �ngers

Size 7 8 9 10 11



Kromet 832

Material Seamless textile support from superior strength Fibers


Color gray

Exterior �nish Exterior �nish leather layer on palm with reinforced thumb / index

Size 7 8 9 10 11



2542

Cat. 2

X2XXXX

4542

Cat. 2

X1XXXX

CUT PROTECTION > Heavy-duty work

2542

deal protection for handling heavy and sharp metal

4542

Cat. 2

X1XXXX

46

Krytherm 585> Cut protection for work requiring dexterity outside or in cold environments

Superior-strength �bers provide good cut protection

The gloves inner insulating-�ber lining protects against the cold (-22° F)

Special Nitrile formulation provides excellent grip

Good resistance to oils, greases and hydrocarbons

Krytherm 585

Material Nitrile

Length (inches) 10.25” -11.5”

Wrist Knitted

Color black



Size 9 10



Food industry Maintenance and work in cold stores

Automotive/mechanical industry Finishing sharp parts Handling metal parts

Plastics industry Post-injection material removal

Other industries Maintenance in wet or cold environments Road works in cold conditions

Applications

SPECIFIC FEATURES:The single layer of material provides excellent cold insulation and optimal comfort.Easy to put on and take off.

Heavy-duty work < CUT PROTECTION

bers provide good cut protection

protects against the cold (-22° F)

excellent grip

hydrocarbons

4343

Cat. 2

01X

KRY


Kronit-Proof 395

CUT PROTECTION > Heavy-duty work

> Excellent mechanical performance to guarantee long-lasting liquid-proof protection

Total hand protection, ANSI level 3 against cuts

Entirely liquid-proof, withstanding mechanical aggression

Proven long-lasting performance, measured after 5 washes

Good grip for picking up wet and slippery objects safely

Automotive/mechanical industry Metal rolling, stamping and assembly Sheet metal Cutting aluminium strips

Other industries Collection and sorting of industrial and household waste

Applications

SPECIFIC FEATURES:Multi-purpose glove combining protection against cuts, liquids and contact heat up to 480°F.

Kronit-Proof 395

MaterialMulti-layer technology: combination

of superior strength �bers and nitrile


Color green


Exterior �nish nitrile coated �bers

Size 7 8 9 10



Cat. 3

X2XXXX

4543 JKL

The gloves are adapted to be in contact with food according to FDA 21 CFR 177.2600

48 THERMAL PROTECTION

Thermal Protection The Mapa Professional Thermal Protection range provides excellent comfort and protection to hands whenever work situations require.

This protection may be needed if hands are exposed to a cold environment over an extended period, or when handling hot or cold objects.

Gloves to protect against cold

Consult the tables below to select the appropriate thermal protection to meet your needs.

TECHNICALPROTECTION

STANDARD PROTECTION

WET

p.51

Temp-Sea

e n v i r o n m e n t

Pe

rf

or

ma

nC

e

DRy

p.50

Ugoria 750-751

Note:To limit fatigue of the hand when gloves must be worn for long periods, a glove without reinforced grip is recommended (Ref. 750-751-770).

PerformanceThe higher the level of performance, the greater the gloves thermal insulation.The gloves are set out in the tables ac-cording to the performance level, and according to the EN 511 standard.Standard protection:suitable for general handling in a cold environment, e.g. handling whilst on off-shore oil rigsTechnical protection:Gives protection both from convective (or ambient) cold, and contact cold.Ideal for handling cold objects in low tem-perature environments, e.g. fishing in cold waters, handling in cold storage rooms.

Environmentselect the glove that meets your needs according to your working environment.On the left are gloves that are ideal for dry environments. On the right are gloves that are increasingly effective in wet environments.All of these gloves are waterproof according to the EN 511 standard. In addition, the Temp-sea glove is 100% liquid-proof ac-cording to the EN 374 standard

49 Mapa Professional Catalog

THERMAL PROTECTION

Gloves to protect against heat

Consult the tables below to select the appropriate thermal protection to meet your needs.

PerformanceThe higher the level of performance, the greater the gloves thermal insulation.The above gloves are Level 2 for heat contact according to the EN 407 standard (tested at 480°F)Standard protection:Ideal for handling hot objects for short periods, e.g. handling moulds in the cera-mic industryTechnical protection:Increased thermal insulation to allow hot objects to be handled for longer periods, e.g. frequently removing hot dishes from ovens.

Environmentselect the glove that meets your needs according to your working environment.Wet:Contact with steam, oils / greases, e.g. removing objects from autoclaves or steam ovensChemical:Hot chemical products, acids, alkalis, petroleum products, etc, e.g. chemical treatment of metals.

Note:- For standard thermal protection in wet environments, see the Liquid proof Protection range (Ref. 321 p.13).

- For level 1 thermal protection (tested at 212°F) see the supported gloves in the Liquidproof protection ranges (Ref. LL-301 p.12 and Chemical protection (Ref. AK-22 p.22 or Ref. NK-22 p.27) or any other supported gloves in these ranges.

PERFORMANCETECHNICAL

PROTECTION

STANDARD PROTECTION

WET

p.52

Temp-Proof

CHEmICAL

p.52

Temp-Tec

DRy

p.53

TempDex

e n v i r o n m e n te n v i r o n m e n t

Pe

rf

or

ma

nC

e


A

50 Cold < THERMAL PROTECTION

Ugoria 750 & 751> The solution for handling and maintenance

in a cold environment

Specially designed PVC for use in extreme cold (-22°F) while preserving the �exibility of the glove

Multi-layer lining for an optimal Thickness / insulation ratio


Ugoria 750 Ugoria 751

Material PVC


Color orange orange

Interior �nish Insulating multi-layer


Wrist knitted safety cuff

Size 10 11

Packaging 72 pairs/carton

Cat. 2

3132 (750/751)

011 (750/751)

Petroleum industry Handling Outdoor handling (valves, etc.)

Transport, logistics (Ref. 750/751) Goods handling on loading bays, docks, warehousing etc. Operating handling equipment Order preparation

Food industry (Ref. 750/751) Maintenance and work in cold stores

Civil engineering Handling Road maintenance

Applications

SPECIFIC

FEATURES:Ugoria gloves are available with a range of exterior �nishes (smooth or reinforced grip) and cuffs (knitted or safety).

750

751


THERMAL PROTECTION > Cold

Temp-Sea 770> Thermal insulation 100% liquid-proof

to protect from extreme contact cold

PVC specially designed for use in extreme cold (-22°F) while preserving the �exibility of the glove


Temp-Sea 770

Material PVC


Interior �nish Jersey support, lined with woollen �eece

Exterior �nish Pebbled

Size 9 10


SPECIFIC

FEATURES:Acrylic �eece lining for excellent thermal insulation, and greater comfort.

Fishing and Work at sea Handling produce

Food industry* Handling and work in cold stores

Transport Handling of liquids at low temperatures (water, oil, hydrocarbons, etc.)

Other industries Maintenance in wet or cold environments Handling in refrigerated or open-air warehouses Ski areas: maintenance, driving equipment

Applications

Cat. 3

121

4221


52 Heat < THERMAL PROTECTION

Temp-Proof 333> Protection against heat and steam with

inner polymer to protect against oils, greases and hydrocarbons

Excellent thermal insulation in wet, oily or steamy conditions Good resistance to oils, greases and hydrocarbons Steam and heat resistant up to 480°F (short contact duration)

Temp-Tec NL-56 & NL-517> A double-layer glove, with thermal insulation

and multi-purpose chemical resistance

Multi-purpose chemical resistance (acids, aliphatic solvents) increased by the thickness of the material

Excellent thermal insulation, due to double-knit cotton up to 480°F (short contact duration)

Good grip of wet or slippery objects, due to embossed texture

Rubber industry Vulcanization, demoulding, forming, etc.

Other industries Boiler room work Steam cleaning Heat treatment up to 480°F (autoclaves, etc.) Steel quenching Handling of hot steel after welding

inner polymer to protect against oils, greases

up to 480°F (short contact duration)

Temp-Proof 333

Material Inner nitrile


Color black

Interior �nish Knitted thermal protection

Exterior �nish Insulating layer

Size 9


Applications

Petrochemical Sampling of hot petrochemical products

Mechanical industry Chemical treatment of metals

Oil quenching of steel

Rubber industry Polymer extrusion

Other industries Manufacture of insulating

electric wires Manufacture of adhesives Handling of moulds in

the ceramic industry Handling of hot piping Road works in cold

conditions Boiler room work Steam cleaning

Applications

Cat. 2

2332

12X

X2XXXX

Cat. 3

2212 ACJKL

11102XXXX

Temp-Tec NL-517 Temp-Tec NL-56

Material Neoprene Neoprene


Thickness (inches) Heavy Weight Heavy Weight

Color blue and black blue and black

Interior �nish Knitted thermal protection Knitted thermal protection

Exterior �nish Non-slip grip Non-slip grip

Size 8 9 10 8 9 10




THERMAL PROTECTION > Heat

Temp-Dex 710> High dexterity and thermal protection

Thin, anatomically-shaped glove ensures dexterity

Excellent abrasion resistance: longer lasting

Special nitrile Grip coating facilitates work in moderately oily environments

Thermal insulation as effective as thick fabric (short contact duration not to exceed 250°F)

Temp-Dex 710

Material Nitrile

Length (inches) 8.75” - 10.25”Wrist Knitted wrist

Color black

Interior �nish Seamless textile support

Exterior �nish Dots

Size 7 9 11


Ceramic and plastics industry Handling of composite materials after heat processing

Construction Industry (Heating engineers/Plumbers) Maintaining pipes, eating equipment

Other industries Handling of hot piping Handling of hot steel after welding Handling of moulds in the ceramic industry

Applications

SPECIFIC FEATURES:Dot embossing for better insulation and better grip

X1XXXX

Cat. 3

4111


54 Disposable 54 CRITICAL ENVIRONMENTs

Critical environments

Quality guaranteed at every stage of production:

Mapa AdvanTech uses its own post-manufacturing cleaning process and clean rooms to maintain a level of product and packaging quality that meets requirements for cleanliness

All manufacturing sites have IsO 9001 certification

The levels of glove cleanliness are tested periodically to ensure that the production quality of these gloves, intended for use in critical environments, complies with established specifications

Each Mapa AdvanTech chemical protection glove is tested using appropriate methods to detect any liquid-resistance defects, as well as inflation tested under inspection lamps so as to ensure user safety

The chemical resistance checks comply with AsTM standards and EN 374-3, providing the users with the information they need to choose suitable gloves for a given application.

With the creation of Mapa AdvanTech, its Critical Environments division, Mapa Professional sought to formalize its expertise in manufacturing gloves for this segment.

Ensuring the protection of both operators and the products they handle, the Mapa AdvanTech range was designed to perfectly fulfil the requirements of high-tech production.

Created with innovative, highly technical processes, and subject to inspection at every stage of their design and of packaging, each of these gloves satisfy all the quality criteria necessary for work in controlled and confined environments.

CRITICAL ENVIRONMENTS 55Mapa Professional Catalog

> Unique tri-polymer construction offers 100% comfort for optimal mechanical and chemical resistance

Excellent resistance and strong chemical protection against a great number of chemical products: exclusive TRIonic formula made from a mix of natural latex, neoprene and nitrile

Manufacturing process guarantees a very low level of contaminants: rates of particles, non-volatile residue, extractables => compatible with ISO 4 class 10

Extensive range adapted to all applications: wide cuff for double-gloving, extended Length to protect the forearm

Electronics: manufacturing integrated circuits, manufacturing semi-conductors, handling of silicon wafers in acid baths

Laboratories: blending, handling and transport of chemicals, handling under fume hood

Applications

TRIonic E-194 TRIonic E-194BPK TRIonic 514 Plus TRIonic 521

Material Natural latex, neopreneand nitirle

Natural latex, neopreneand nitirle



Length (inches) 14” 14” 15” 18”

Thickness (inches) 0.020” (20mil) 0.020” (20mil) 0.020” (20mil) 0.020” (20mil)

Wrist Straight cuff Straight cuff Straight cuff Straight cuff

Color non pigmented non pigmented non pigmented non pigmented

Interior �nish Chlorinated Chlorinated Chlorinated Chlorinated

Exterior �nish Embossed texture Embossed texture Embossed texture Embossed textureSize 6 7 8 9 10 11 6 7 8 9 10 11 6 7 8 9 10 11 8 9 10





TRIonic 0-240

Material Natural latex, neopreneand nitirle


Thickness (inches) 0.020” (20mil)

Wrist Straight cuff

Color orange


Exterior �nish Embossed textureSize 7 8 9 10 11


Cat. 3

1110

Cat. 3

1110

TRIonic


A

56 CRITICAL ENVIRONMENTS

Stansolv A-10CR

RollPruf 0726 or 0716

> The chemical protection of nitrile combined with excellent mechanical resistance

Manufacturing process guarantees a very low level of contaminants: rates of particles, non-volatile residue, extractables => compatible with ISO 5 class 100 cleanrooms.

Optimal dexterity without compromising chemical resistance

Better resistance than natural latex gloves against organic solvents

Recommended for people sensitive to the proteins in natural latex

> Triple polymer durability and strength with color band at rolled cuff to identify size.

Hand speci�c design provides optimum comfort, reduced hand fatigue, available in sizes 6.5-9 including half sizes

Good tactile sensitivity and good resistance to chemical splash

Compatible with ISO 4 class 10 cleanrooms

RollPruf 0726 RollPruf 0716

Material Mixed formula (natural latex, neoprene and nitrile)


Thickness (inches) 0.008 (8mil)

Wrist Rolled cuff

Color not pigmented


Exterior �nish Smooth with pebbled �ngertips

Size 61/2 7 71/2 8 81/2 9

Packaging 50 LH or RH - 50 pair/bag 200 pairs/carton

1 pair/bag - 100 pair/master 200 pairs/carton

Controlled environment <

All applications requiring a reduced incidence of particles and extractables, combined with resistance to solvents, abrasion and puncture: silicon handling, production of ultra-pure chemicals, solvent handling, and blending operations

Applications

Electronics: Photomask assembly, integrated circuit assembly, CD production, placement of thin layers

Health: pharmaceutical manufacturing, manufacturing of medical equipment

Laboratories: Research, analysis, manipulation of precision parts, optical processes

Applications

Stanslov A-10CR

Material Nitrile


Thickness (inches) 0.011 (11mil)

Wrist Straight cuff

Color green



Size 6 7 8 9 10 11


Cat. 3

3001

Cat. 3

riple polymer durability and strength with color band

Cat. 3

CRITICAL ENVIRONMENTS 57Mapa Professional Catalog

< Controlled environments

Sensitron 0760> The comfort and �exibility of latex for short-term operations Maximum comfort and reduction of hand fatigue: anatomical shape like surgeons’, gloves, extensive range of sizes (including half sizes)

Good tactile sensitivity and good resistance to chemical splash Compatible with ISO 4 class 10 cleanrooms

Cat. 3

Niprotect CC 529> Reinforced mechanical resistance for short-term operations Manufacturing process guarantees a very low level of contaminants: rates of particles, non-volatile residue, extractables => compatible with ISO 5 class 100 cleanrooms

100% nitrile formula enables anti-static properties Protection against accidental chemical splashes Recommended for people who are sensitive to the proteins in natural latex

Cat. 3

Electronics: electronic component assembly (displays, LEDs, etc.)

Laboratories: Manufacturing of medicines, pharmaceutical preparation

Applications

TRIlites 984 CP> Tri-polymer formula for protection against chemical splashes

Extended length offers extra protection to hand & wrist area

Exclusive �nish minimizes tape and label sticking to gloves

Clean process gloves

Cat. 3

Niprotect CC 529Material NitrileLength (inches) 12”Thickness (inches) 0.004 (4 mil)Wrist Rolled CuffColor whiteInterior �nish ChlorinatedExterior �nish Smooth with pebbled �ngertipsSize 6 7 8 9 10Packaging 100 pairs/bag - 1000 pairs/carton

Sensitron 0760Material Natural latexLength (inches) 12”Thickness (inches) 0.008 (8 mil)Wrist Rolled CuffColor not pigmentedInterior �nish ChlorinatedExterior �nish Smooth with pebbled �ngertipsSize 6 61/2 7 71/2 8 81/2 9Packaging 50 glove/bag - 50 pairs/bag - 200 pairs/carton

> Tri-polymer formula for protection against chemical splashes Cat. 3




Applications

TRIlites 984 CPMaterial Natural latex, neoprene and nitrileLength (inches) 11.5”Thickness (inches) 0.006 (6 mil)Wrist Rolled CuffColor purpleInterior �nish ChlorinatedExterior �nish Smooth with pebbled palmSize 6 7 8 9Packaging pairs/bag - pairs/carton




Applications

58

Disposable > 04 Liquidproof protection > 08 Chemical protection > 14 Handling > 34

Tradename Style mgC # Country of Origin Har. Codes

uSDA/FDA Compliant

21CFR170-199

Canadian CFIA

CompliantECCN # Page

Blue-Grip LL-301 30142 Malaysia 6116.10.5530 • • EAR99 12

Butoflex 650 65031 USA 6116.10.5530 • EAR99 31

Butoflex 651 65131 USA 4015.19.1050 • EAR99 31

Chem-Ply N-360 40695 Malaysia 4015.19.1050 • EAR99 29





ChemZoil NL-339 33942 Malaysia 6116.10.5530 • EAR99 28

Classics L-210 17505 Malaysia 4015.19.1050 • • EAR99 11

Classics L-200 17701 Malaysia 4015.19.1050 • • EAR99 11

Enduro 327 32722 China 6116.10.5530 EAR99 38

Enduro 328 32841 China 6116.10.5530 EAR99 38

Enduro 330 33031 Malaysia 6116.10.5530 EAR99 39

Fluonit 468 46812 Malaysia 4015.19.1050 EAR99 33

Fluotex 344 34412 Malaysia 6116.10.5530 EAR99 33

Harpon 321 32112 Malaysia 6116.10.5530 EAR99 13

Harpon 326 32612 Malaysia 6116.10.5530 • EAR99 12

Kroflex 840 84041 China 6116.10.5530 • EAR99 45

Kromet 832 83241 China 6116.10.5530 • EAR99 45

Kronit-Proof 395 39531 Malaysia 6116.10.5530 EAR99 47

Krynit 563 56341 China 6116.10.5530 • EAR99 42

Krynit 582 58241 China 6116.10.5530 EAR99 44

Krynit 559 55941 China 6116.10.5530 EAR99 42

Krytech 579 57912 China 6116.10.5530 EAR99 42



Krytech 560 56039 Korea 6116.10.5530 EAR99 42

Krytherm 585 58541 China 6116.10.5530 • EAR99 46

NiProTect CC 529 52942 Malaysia 4015.19.1010 • EAR99 57

Optinit 472 47222 Malaysia 4015.19.1050 • • EAR99 21

ProTector AFR-282 29342 Malaysia 4015.19.1050 • EAR99 19

Pylox V-5 54196 Thailand 3926.20.1050 EAR99 6,16

Pylox V-10 54242 Thailand 3926.20.1050 EAR99 10, 17

Pylox V-20 54342 Thailand 3926.20.1050 EAR99 17

RollPruf 0726 51356 Malaysia 4015.19.1050 • EAR99 56

RollPruf 0716 51398 Malaysia 4015.19.1050 • EAR99 56

SensiTron 0760 51556 Malaysia 4015.19.1050 • EAR99 57

Solo Ultra 980 98042 Malaysia 4015.19.1010 • EAR99 6



StanSolv 489 48942 Malaysia 4015.19.1050 • EAR99 23

StanSolv AK-22 38141 Malaysia 6116.10.5530 • • EAR99 22

StanSolv A-10 47042 Malaysia 4015.19.1050 • • EAR99 21

StanSolv A-14 47401 Malaysia 4015.19.1050 • EAR99 23


REFERENCE LIsTING


59


Tradename Style mgC # Country of Origin Har. Codes

uSDA/FDA Compliant

21CFR170-199

Canadian CFIA

CompliantECCN # Page

StanSolv A-18 48043 Malaysia 4015.19.1050 • EAR99 23

StanSolv AF-18 48342 Malaysia 4015.19.1050 • EAR99 22

StanSolv AF-15 48542 Malaysia 4015.19.1050 • • EAR99 22





StanSolv A-10CR 51931 Malaysia 4015.19.1050 • EAR99 56

StanZoil NL-34 33494 Malaysia 6116.10.5530 • EAR99 26

StanZoil NL-52 33742 Malaysia 6116.10.5530 • EAR99 26

StanZoil NK-22 38242 Malaysia 6116.10.5530 • EAR99 27

Sure-Grip LF-128 20103 Malaysia 4015.19.1050 • EAR99 10

Technic NS-401 40144 Malaysia 4015.19.1050 • EAR99 25



Temp-Dex 710 71012 China 6116.10.5530 EAR99 53

Temp-Proof 333 33331 India 6116.10.5530 EAR99 52

Temp-Sea 770 77039 China 6116.10.5530 EAR99 51

Temp-Tec NL-56 33242 Malaysia 6116.10.5530 • • EAR99 52

Temp-Tec NL-517 33860 Malaysia 6116.10.5530 • • EAR99 52

Titan 385 38539 China 6116.10.5530 • EAR99 39

Titan 388 38839 China 6116.10.5530 • EAR99 39

Titan 391 39139 China 6116.10.5530 • EAR99 39

Titan 392 39239 China 6116.10.5530 • EAR99 39

Titanlite GPA-397 39742 Sri Lanka 6116.10.5530 • EAR99 38

Trident 286 28631 Malaysia 4015.19.1050 • EAR99 19

Trident 287 28731 Malaysia 4015.19.1050 • EAR99 19

TRIlites 984 98492 Malaysia 4015.19.1010 • EAR99 57

TRIlites 994 Bag 99492 Malaysia 4015.19.1010 • EAR99 7

TRIlites 994 Box 99495 Malaysia 4015.19.1010 • EAR99 7

TRIlites Grippy 983 98395 Malaysia 4015.19.1010 • EAR99 7

TRIlites Grippy 993 99390 Malaysia 4015.19.1010 • EAR99 7

TRIonic E-194 51731 Malaysia 4015.19.1050 • EAR99 55

TRIonic E-194BPK 51798 Malaysia 4015.19.1050 • EAR99 55

TRIonic O-240 51856 Malaysia 4015.19.1050 • EAR99 55

TRIonic 521 52131 Malaysia 4015.19.1050 • EAR99 55

TRIonic 514 Plus 51431 Malaysia 4015.19.1050 • EAR99 55

Two-Tone NS-53 40542 Malaysia 4015.19.1050 • EAR99 18

Ugoria 750 75039 China 6116.10.5530 EAR99 50

Ugoria 751 75139 China 6116.10.5530 EAR99 50

Ultrane 548 54839 China 6116.10.5530 EAR99 36






REFERENCE LIsTING


60

Disposable > 04 Liquidproof protection > 08 Chemical protection > 14 Handling > 34

Engineered for PerformanceMAPA gloves are engineered ad manufactured for optimum protection, with high-performance features like multiple dip construction. This unique dipping construction provides reassurance against any flaws or thin spots in the first layer: It ensures a more liquid-proof glove and helps identify abraded areas before breakthrough occurs It’s just one of the many corners we refuse to cut.

Our flexible menu of top quality raw materials, construction styles, grip patterns, linings, cuff designs and other options allows you to design the perfect glove for any application. Our rigorous standards for raw materials, construction design, product performance and customer satisfaction ensure that no matter which MAPA product you choose, you always receive the same exceptional level of quality.

> Chemical Protection Testing

> Mechanical Resistance Testing

Mechanical Resistance Testing

Abrasion Test Cut Test Puncture Test Tear Test

Test method: AsTM D3389

Test method: AsTM F1790-05

Test method: EN 388

Test method: AsTM D624

Uses abrading wheels to measure number of cycles a glove can

withstand before breakthrough or a

percentage of weight loss after a given number of cycles.

Measures weight needed to cut through material with 20mm of

blade travel.

Measures the force (in Newton) exerted by a stylus to break

through a glove specimen mounted on a

dynamometer.

Measures the maximum force

(in Newton) to tear apart a test piece mounted in the

grips of dynamometer.

Chemical Protection Testing

Penetration Test Degradation Test Permeation Test

Test method: EN 374 Test method: AsTM D471; ANsI/IsEA 105-2000 Test method: AsTM F739

Air leak test

Assesses the change in physical properties

(swelling, stiffening, softening, change in color, etc.)

Measures diffusion of the chemical through

the material on a molecular basis

A chemical protective glove must be free of pinholes, seams or flaws that would result in immediate penetration of the chemical, resistant to the specific chemicals being used. and resistant to degradation and permeation. The following tests are among those MAPA uses to assess the chemical resistance of our gloves:

A glove’s mechanical resistance is determined by its material, its construction and its overall thickness. MAPA measures mechanical resistance properties with several tests including, but not limited to, the following:

U.S. Glove Testing and Test Methods

> Tensile PropertiesTest method: AsTM D412 (unsupported gloves only). This quality control test is performed periodically during the production cycle. It measures the maximum force (in lbf) to tear apart a test piece mounted in the grips of a dynomemter and provides the following measurements.

Tensile Properties

Tensile Strength Ultimate Elongation Modulus

Force (in PsI or MPa) recorded when the test

piece breaks per cross-section area of the test piece

Length of test piece at break as a percentage

of the initial length.

Tensile stress value (in PsI or MPa) at given

elongation. The lower the modulus, the more flexible

the material.

GENERAL INFORMATION


61


> Laundering your Gloves*:some lined/supported MAPA gloves are launderable under certain conditions. Important: NEVER launder any gloves that have been in contact with toxic or corrosive chemicals.

• Washing: Water temperature: 110° to 140°F (43° to 60°C)

• Detergent: Standard commercial, avoid excess alkalinity

• Cycle: Normal gentle

• Time: Minimum time required to clean or sanitize

Drying your Gloves:

• Dryer Temp: 120° to 140°F (50° to 60°C)

• Time: Minimum as required to dry

Additional considerations:

• Avoid excessive wash time or agitation during washing/dryer

• DO NOT overload the washer or dryer, particularly with heavy and/or sharp objects such as pants with buckles, zippers, etc.

• DO NOT use bleach

• DO NOT dry clean using solvents

• If possible, gloves should be inverted (cuff to fingertips) before drying

*NOTE: These are recommended laundering procedures; however MAPA does not guarantee chemical or mechanical properties of the gloves following these procedures.

> Storage • Keep gloves in poly bag until used. This will protect

them from contamination and damage.

• Store in a cool, dry place in original boxes away from direct sunlight, artificial light and humidity. stored between 40° to 95°F (5° to 35°C).

• Natural rubber gloves should be kept from heat sources and electric equipment producing ozone.

> Use and Removal• When putting on gloves, make sure hands are

clean and dry.

• Inspect gloves for cracks and snags. Do not use gloves showing signs of wear.

• Don’t use the same pair for long periods.

• Take them off regularly.

• Pay attention to chemical breakthrough times.

• Use two pairs alternately if working for long periods.

• Fold over the cuff end when working with liquids.

• Wash gloves (using the appropriate solvent, or running water, if indicated) before removing them.

• Remove gloves without touching the external surface, either by pulling on the finger tips (using one glove to remove the other) or by gripping the cuff edge and folding back, (turning them inside out while removing)

> Service MandateMAPA is more than a leading manufacturer of protective gloves; we’re a renowned expert in the field of protection technology. We partner with our customers to provide you with the complete protection solutions you require.

Our dedicated direct sales force is a critical part of our total solution approach to customer service. Comprised of knowledgeable, service-minded professionals, it offers our customers a wealth of information, product support and protection solutions.

GENERAL INFORMATION

Care and Life ExpectancyWith proper care and handling your MAPA gloves offer years of service life. Here are a few ways to maximize life expectancy:



www.mapa-pro.com

www.mapa-pro.com

A solution for every hand

that works

SummaryGeneral Information 02

Disposable 04Disposable gloves to protect hands and products during delicate work

Liquidproof Protection 08For prolonged contact with mildly aggressive liquids

Chemical Protection 14A solution for every situation, due to a complete range classified by polymer

Handling Protection 34To resist injuries endured during general handling work


Cut Protection 40Solutions adapted to all hazardous cutting situations


Thermal Protection 48For high/low temperature environments involving hot/cold contacts

Critical Environments 54Specific solutions for controlling the environment in clean rooms or containment buildings

Controlled environments Confined environments

Reference Listing 58

General Information 60

UNITED STATES OF AMERICAMAPA PROFESSIONALDiv. of Jarden Safety & Security, Inc.2834 Schoeneck RoadMacungie, PA 18062-9679 USAToll Free: (800) 537-2897Fax: (800) [email protected]

CANADAMAPA PROFESSIONAL88B East Beaver Creek, Unit 6Richmond Hill, ONL4B 4W2 CANADAToll Free: (800) 265-5674www.mapa-pro.ca

your distributor:

KRY

for the job in hand, there is a Mapa gloveA

A

united states of america mapa professional€¦ · the manufacturer must ensure that each...

Documents