united states environmental protection agency '/o · mc0069 se mc0078 se matrix spike...
TRANSCRIPT
\\o'/
UNITED STATES ENVIRONMENTAL PROTECTION AGENCYENVIRONMENTAL SCIENCE CENTER
701 MAPES ROADFORT MEADE, MD 20755-5350
S°MS DOC/O2065645
DATE : September 4, 2002
SUBJECT: Region III Data QA_Review
FROM : Fredrick ForemaiRegion III ESAT l PO (3ES20;
TO : Romuald RomanRegional Project Manager (3HS22)
r-
Attached is the inorganic"data validation report for the ValmontTCE site (Case #: 30647, SDG#: MC002, MC0035, MC0069, MC0078,MC0109, MC0128, MC0143M MC0153) completed by the Region IIIEnvironmental Services Assistance Team (ESAT) contractor under thedirection of Region III ESD.
If you have any questions regarding this review, please call me at(410) 305-2629.
Attachments
cc: Neil Teamerson (Tetratech NUS)
TO File: 0007 TDF#: 0746
OFFICE OF ANALYTICAL SERVICES AND QUALITY ASSURANCE
Internet Address (URL) • http://www.epa.govRecycled/Recyclable ••Printed with Vegetable Oil Based Inks on Recycled Paper (Minimum 30% Postconsumer)
Lockheed Martin Environmental ServicesUS EPA Environmental Science Center701 Mapes Road Ft. Meade, MD 20755-5350Telephone 410-305-3037 Facsimile 410-305-3597
L O C K H E E D HI A R
DATE: August 29,2002
SUBJECT: Inorganic Data Validation (IM2 Level)Case: 30647SDGs: MC0002,MC0035,MC0069,MC0078,MC0109,MC0128,
MC0143.MC0153Site: Valmont TGE
FROM:
TO:
OVERVIEW
Kenneth W. CurryInorganic Data Reviewer
Fredrick ForemanESAT Region 3 Project Officer
Mahboobeh Mecanic *Senior Oversight Chemist
Case 30647, Sample Delivery Groups (SDGs) MC0002, MC0035, MC0069, MC0078, MC0109,MC0128, MC0143 and MC0153, from the Valmont TCE site consisted of one hundred thirty-one (131) soil samples and four (4) associated aqueous blanks analyzed for total metals andcyanide (CN~) in addition one (1) aqueous blank was analyzed for total metals only. All sampleswere analyzed by CompuChem (LEBRTY). The sample set included two (2) rinsate blanks, three(3) field blanks and eight (8) field duplicate pairs. Samples were analyzed in accordance withContract Laboratory Program (CLP) Statement of Work (SOW) ILM04.1 through RoutineAnalytical Services (RAS) program.
SUMMARY
All samples were successfully analyzed for all Target Analyte List (TAL) parameters with theexception of those listed under "Major Problem". Areas of concern with respect to data usabilityare listed below.
One (1) field blank was collected 6/24/02 while the remaining field and rinsate blanks werecollected 6/28/02. The samples were collected 6/24/02,6/26/02,6/27/02 and 6/28/02. Due tothe sampling dates of the blanks, the highest detected concentration of an analyte in the rinsateand field blanks were utilized by the reviewer to assess these data for blank contamination.
Data in this case have been impacted by outliers present in laboratory, field and rinsate blanks,sample cooler chest temperature as well as matrix spike, laboratory duplicate, ICP serial dilution,continuing calibration verification, laboratory control sample and Contract Required DetectionLimit (CRDL) standard analyses. Details of these outliers are discussed under "Major and MinorProblems"; specific samples affected are outlined in "Table 1A" and qualified analytical resultsfor all samples are summarized on Data Summary Forms (DSFs).
Page 2 of5
MAJOR PROBLEM
Matrix spike recoveries were extremely low (<30%) for antimony (Sb) in SDG MC0002 and formanganese (Mn) in SDG MC0143. Reported results for these analytes in these SDGs may bebiased extremely low. The "L" qualifier for Mn in SDG MC0143 has been superseded by "J"on the DSFs. Quantitation limits for Sb in SDG MC0002 were rejected and qualified "R".
MINOR PROBLEMS
Continuing Calibration (CCB), Preparation (PB), Field (FB) and/or Rinsate (RB) Blanks hadreported results greater than the Instrument Detection Limits (DDLs) for analytes listed below.Reported results in affected samples which are less than or equal to five times (<5X) blankconcentrations may be biased high and have been qualified "B" on DSFs.
SDG Blank Affected AnalvtesMC0002 CCB selenium (Se)
FB nickel (Ni), sodium (Na)RB calcium (Ca), cyanide (CN")
MC0035 CCB aluminum (Al), barium (Ba), Ca, iron (Fe), magnesium (Mg)PB zinc (Zn), CN'
MC0069 CCB Sb, beryllium (Be)FB Ni, NaRB Ca, Mg,
MC0078 CCB Sb, BeFB . Ni,NaRB Ca, Mg,
MC0109 FB Ni,NaRB Ca, Mg,
MC0128 CCB BeFB • Ni, NaRB Ca,CN'
MC0143 CCB Sb, BeFB Ni,NaRB Ca, Mg,
MC0153 CCB Be, thallium (Tl)FB copper (Cu), Ni, NaRB Ca, Mg,
Page 3 of5
Continuing calibration and/or preparation blanks had negative values greater than the absolutevalue of the EDLs for analytes listed below. Reported results less than two times (<2X) theabsolute value of the blank and quantitation limits for these analytes in affected samples may bebiased low and have been qualified "L" and "UL", respectively, on the DSFs unless supersededby "B".
Analyte(s)MC0035 chromium (Cr)MC0069 CaMC0078 Ca,NaMC0109 SbMC0153 Se,Na
CRDL standard recoveries were low (<90%) for analytes listed below. Low recoveries mayindicate negative biases for results detected near detection limits due to an unstable baseline.Reported result which are <2XCRDL and quantitation limits for these analytes in affectedsamples may be biased low and have been qualified "L" and "UL", respectively, on the DSFs.
SPG Analvte(s)MC0035 lead (Pb)MC0069 Se,zinc(Zn)MC0078 ZnMC0128 SeMC0153 Se,Zn
CRDL standard recoveries were high (>110%) for analytes listed below. High recoveries mayindicate positive biases for results detected near detection limits due to an unstable baseline.Reported results which are <2XCRDL for these analytes in affected samples may be biased highand have been qualified "K" on the DSFs unless superseded by "B".
SPG Analyte(s)MC0002 arsenic (As), Se, ZnMC0069 SeMC0078 Se
Matrix spike recoveries were low (<75%) for analytes listed below. Reported results andquantitation limits for these analytes in these SDGs may be biased low and have been qualified"L" and "UL", respectively, on the DSFs unless superseded by "B".
1 Analvte(s)MC0002 SeMC0069 Sb, Mn, mercury (Hg), TlMC0078 Sb, Mn, TlMC0109 SbMC0128 SbMC0143 Sb, SeMC0153 Sb, Tl
Page 4 of5
Matrix spike recoveries were high (>125%) for Pb and Mn in SDG MC0002 as well as for Pb inSDG MCO 109. Reported results for this analyte in these SDGs may be biased high and havebeen qualified "K" on the DSFs.
Relative Percent Differences (RPDs) for laboratory duplicate analyses were outside control limits(35% RPD, ±2CRDL) for As in SDG MC0069 and for Mn in SDG MC0143. Reported resultsfor these analytes in these SDGs are estimated and have been qualified "J" on the DSFs.
Percent Differences (%Ds) for ICP serial dilution analyses were outside control limits (>10%)for analytes listed below. Reported results for these analytes are estimated and have beenqualified "J" on the DSFs unless superseded by "B".
SDG AnalvtesMC0002 Mg, ZnMC0109 MgMC0128 ZnMC0143 ZnMC0153 Ca, Cr, potassium (K)
Recoveries of Na in the Laboratory Control Sample (LCS) analyses in SDGs MC0002, MC0109,MC0128 and MC0143 were outside the upper control limit. Reported results for this analyte inthis SDG may be biased high. The "K" qualifier for this outlier has been superseded by "B" onthe DSFs.
The sample coolers had interior temperatures of 7.1 °C and /or 8.0 °C for samples analyzed inSDGs MC0002, MC0035, MC0143 and MC0153 when received by the laboratory. Reportedresults and quantitation limits for CM" in affected samples may be biased low and have beenqualified "L" and "UL", respectively, on the DSFs unless superseded by "B". Due tothermostability of metals, no other data were qualified based on the sample cooler cheststemperature.
Matrix spike recoveries were low (<75%) while CRDL standard recoveries were high (>110%)for Hg in SDG MC0128 and for Se in SDG MCO143, producing opposing bias effects for resultsdetected near detection limits due to an unstable baseline. Reported results which are <2XCRDLfor these analyte? in affected samples in these SDGs are estimated and have been qualified "J" onthe DSFs.
A continuing calibration verification standard recovery was high for Al in SDG MCO 153.Reported results for this analyte in affected samples in this SDG may be biased high and havebeen qualified "K" on the DSFs.
NOTES
The laboratory duplicate results for Mn and Zn in SDG MC0002 as well as for Cr and Fe in SDGMCO 143 were outside the contractual control limit of 20% RPD, ±CRDL. However, the resultsfor these analytes were within the control limit of 35% RPD, ±2XCRDL utilized for datavalidation of soil samples in Region 3. No data were qualified based on these outliers.
Page 5 of 5
The matrix spike recovery for Mn in SDG MC0002 was not considered outside the QC limits bythie laboratory since the result would round down to the upper limit. Laboratory Form Is do notindicate a matrix spike outlier for this analyte in this SDG. The reviewer considered this result asbeing outside the upper QC limit and qualified results accordingly.
Field blank, sample MC0185, was not analyzed for CN". This sample was listed on the Chain ofCustody (COC) record for CN' analysis.
Reported results for the field duplicate pairs were within 35% RPD, ±2XCRDL for all analytesexcept for those listed below.
Duplicate Pair Analyte(s)MC0017/MC0018 Al,Mn,ZnMC0075/MC0076 MnMC0100/MC0101 - Fe,PbMC0109/MC0110 As, Cr, Fe, Pb, MnMC0166/MC0181 Cr,Fe,PbMC0167/MC0182 Al
Data for Case 30647, SDGs MC0002, MC0035, MC0069, MC0078, MC0109, MC0128,MC0143 and MC0153, were reviewed in accordance with National Functional Guidelines forEvaluating Inorganic Analyses with Modification for use within Region in.
ATTACHMENTS
INFORMATION REGARDING REPORT CONTENT
Table 1A is a summary of qualifiers applied to the laboratory- generated results during datavalidation.
TABLE 1A SUMMARY OF QUALIFIERS ON DATA SUMMARY FORMS AFTERDATA VALIDATION
TABLE IB CODES USED IN COMMENTS COLUMN OF TABLE 1AAPPENDIX A GLOSSARY OF DATA QUALIFIER CODESAPPENDIX B ~ DATA SUMMARY FORMSAPPENDIX C CHAIN OF CUSTODY (COC) RECORDSAPPENDIX D LABORATORY CASE NARRATIVES
DCN:30647IM2.wpd
Page 1 of 14
TABLE 1ASUMMARY OF QUALIFIERS ON DATA SUMMARY
FORM AFTER DATA VALIDATIONCASE: 30647SDG#: MC0002
ANALYTE
Sb
As
Ca
Se
SAMPLESAFFECTED
All Samples
MC0012, MC0014,MC0015.MC0017,MC0018,MC0021,MC0022, MC0024,MC0025, MC0033
All Samples ExceptMC0015,MC0021,MC0025, MC0028
MC0022, MC0023,MC0024, MC0027,MC0029, MC0030,MC0031.MC0032,MC0033
MC0027, MC0029,MC0030,MC0031,MC0032, MC0033
MC0012, MC0014,MC0015,MC0017,MC0018,MC0021,MC0022, MC0023,MC0024, MC0025
NON-POSITIVE DETECTEDVALUES VALUES
K
B
Pb
Mg
Mn
Ni
All Samples
All Samples
All Samples
MC0002, MC0012,
K
J
K
B
B
BIAS
Extr./Low
High
High
High
High
High
Mixed
High
COMMENTS*
MSE(28.6%)
CRH(110.8%)
RB(851|ig/L)
MSH(161.6%)
MSH(125.3%)
FB(4.8'|ig/L)
MSL(66.4%)CRH(112.5%)
CCB(3.3CRH(112.5%)MSL(66.4%)
* See explanation of Comments on Table IB.
Page 2 of 14
CASE: 30647SDG#: MC0002
TABLE1ASUMMARY OF QUALIFIERS ON DATA SUMMARY
FORM AFTER DATA VALIDATION
ANALYTE
Se
Na
Zn
SAMPLESAFFECTED
MC0002, MC0004,MC0020
MC0028
All Samples
All Samples ExceptMC0024, MC0033
MC0024, MC0033
MC0002, MC0004,MC0015,MC0017,MC0020, MC0022,MC0023, MC0024,MC0027, MC0028,MC0030.MC0031,MC0032, MC0033
MC0012, MC0014,MC0018,MC0021,MC0025, MC0029
NON-POSITIVE DETECTEDVALUES VALUES
B
L
B
B
BIAS
High
Low
High
High
UL Low
COMMENTS
CCB(3.3MSL(66.4%)
MSL(66.4%)
FB(1190»ig/L)LCH(374.4%)
CRH(110.8%)
RB(1.4ng/L)CHT(7.1 °C)
CHT(7.1
* See explanation of Comments on Table IB.
Page 3 of 14
TABLE 1ASUMMARY OF QUALIFIERS ON DATA SUMMARY
FORM AFTER DATA VALIDATIONCASE: 30647SDG#: MC0035
SAMPLESANALYTE AFFECTED
Al
Ba
Ca
Cr
Fe
Pb
Mg
Zn
MC0035
MC0035
MC0141,MC0142,MC0184.MC0185
MC0035
All Samples
MC0035
MC0184
All Samples
MC0035
MC0141.MC0142,MC0184, MC0185
All Samples
MC0141,MC0142
MC0035
MC0184
NON-POSITIVE DETECTED
B
B
B
B
L
B
B
B
B
B
B
VALUES
UL
UL
UL
UL
BIAS
High
High
High
High
Low
High
High
Low
High
High
High
High
Low
Low
COMMENTS*
CCB(81.2ng/L)
CCB(0.7 jig/L)
CCB(0.5 \Lg/L)
CCB(106.4 jig/L)
PBN(-0.521 ng/L)
CCB(26.5 jig/L)
CCB(10.1 ng/L)
CRL(88.8%)
CCB(154.4^ig/L)
CCB(97.6 pg/L)
PB (2.907 |ig/L)
PB (0.792 \igfL)
CHT(7.1 °C)
CHT(8.0 °C)
* See explanation of Comments on Table IB.
Page 4 of 14
CASE: 30647SDG#: MC0069
TABLE1ASUMMARY OF QUALIFIERS ON DATA SUMMARY
FORM AFTER DATA VALIDATION
ANALYTE
Sb
As
Be
Ca
SAMPLESAFFECTED
MC0069, MC0070,MC0071,MC0072,MC0073, MC0074,MC0075, MC0076,MC0077, MC0079
MC0080, MC0082,MC0083, MC0085,MC0086
MC0081.MC0084,MC0087, MC0088,MC0089
All Samples
MC0069, MC0070,MC0073
MC0074, MC0076,MC0077, MC0079,MC0081.MC0082,MC0084, MC0085,MC0086
MC0087, MC0088,MC0089
All Samples ExceptMC0072, MC0074,MC0077.MC0081,MC0088
MC0077
NON-POSITIVE DETECTEDVALUES VALUES BIAS
B
B
J
B
B
B
B
B
High
UL
High
Low
COMMENTS*
CCB( 2.9 ng/L)MSL(51.8%)
CCB( 2.0 ng/L)MSL(51.8%)
MSL(51.8%)
DUP(91.4%)
High CCB(0.5 jig/L)
High CCB(0.3 jig/L)
High CCB(0.4 |ig/L)\
High RB(851ng/L)
High RB (851 jig/L)CBN(-48.0 jig/L)
* See explanation of Comments on Table IB.
Page 5 of 14
TABLE 1ASUMMARY OF QUALIFIERS ON DATA SUMMARY
FORM AFTER DATA VALIDATIONCASE: 30647SDG#: MC0069
NON-
ANALYTE
Ca
Mg
Mn
Hg
Ni
SAMPLESAFFECTED
MC0088
MC0083, MC0086
All Samples
All Samples
All Samples Except
POSITIVE DETECTEDVALUES VALUES
B
B
L
UL
, B
BIAS
High
High
Low
Low
High
Se
Na
Tl
Zn
ON'
MC0069, MC0072,MC0082
All Samples Except KMC0075, MC0087,MC0088, MC0089
MC0087, MC0088,MC0089
All Samples Except BMC0077
All Samples
MC0070 L
MC0086 L
MC0069, MC0070, BMC0071.MC0072,MC0073, MC0074,MC0076, MC0079,MC0081.MC0082,MC0084, MC0085,MC0086, MC0088
UL
UL
High
Low
High
Low
Low
Low
High
COMMENTS
CBN(-31.0ng/L)
RB (112 ng/L)
MSL(74.2%)
MSL(61.8%)
FB (4.8
CRH(113.5%)
CRL(77.4%)
FB(1190iig/L)
MSL(71.4%)
CRL(87.2%)
CRL(88.0%)
RB(1.4ng/L)
< _
* See explanation of Comments on Table IB.
Page 6 of 14
TABLE 1ASUMMARY OF QUALIFIERS ON DATA SUMMARY
FORM AFTER DATA VALIDATIONCASE: 30647SDG#: MC0078
ANALYTE
Sb
Be
Ca
SAMPLESAFFECTED
MC0078, MC0090,MC0091
MC0093, MC0094,MC0095, MC0096,MC0097, MC0098,MC0100,MC0101
MC0103,MC0104,MC0105,MC0106,MC0107
MC0092, MC0099,MC0102,MC0108
MC0078, MC0090,MC0091
MC0092, MC0093,MC0094, MC0095,MC0096, MC0097,MC0098, MC0099,MCOIOO.MCOIOI
MC0102,MC0103,MC0104.MC0105,MC0106,MC0107,MC0108
All Samples ExceptMC0092, MC0095,MC0104,MC0105,MC0106
MC0092, MC0095,MC0104,MC0105,MC0106
NON-POSITIVE DETECTEDVALUES VALUES BIAS
B
B
B
B
B
B
B
B
High
High
UL
High
Low
High
High
High
High
High
COMMENTS*
CCB( 2.5 jig/L)MSL(50.6%)
CCB( 2.3MSL(50.6%)
CCB(2.7MSL(50.6%)
MSL(50.6%)
CCB(1.1 iig/L)
CCB(0.7 jig/L)
CCB(0.5
RB(851jig/L)
RB(851 jig/L)PBN(-11.841mg/Kg)
* See explanation of Comments on Table IB.
Page 7 of 14
CASE: 30647SDG#: MC0078
TABLE 1ASUMMARY OF QUALIFIERS ON DATA SUMMARY
FORM AFTER DATA VALIDATION
ANALYTE
Mg
Mn
Ni
Se
Na
Tl
Zn
SAMPLESAFFECTED
MC0092, MC0104,MC0108
All Samples
All Samples ExceptMC0091,MC0096
MC0093,MC0095,MC0097,MC0100,MC0102,MC0105,MC0107
MC0094,MC0096,MC0098,MC0101,MC0103,MC0106,
All Samples ExceptMC0102, MC0103,MC0104.MC0105,MC0106,'MC0107
MC0102.MC0103,MC0104,MC0105,MC0106,MC0107
All Samples
MC0092, MC0095,MC0104, MC0107,MC0108
All Samples ExceptMC0090,MC0100,MC0108
NON-POSITIVE DETECTEDVALUES VALUES BIAS
B
L
B
K
B
B
B
High
UL
COMMENTS*
RB(112ng/L)
Low MSL(67.4%)
High FB (4.8 jig/L)
High CRH(112.4%)
High FB(1190ng/L)
High FB(1190[ig/L)CBN(-228.8 jig/L)
Low MSL(74.7%)
Low CRL(87.3%, 87.2%)
High RB(1.4jig/L)
* See explanation of Comments on Table IB.
Page 8 of 14
TABLE1ASUMMARY OF QUALIFIERS ON DATA SUMMARY
FORM AFTER DATA VALIDATIONCASE: 30647SDG#: MC0109
NON-
ANALYTE
Sb
Ca
Pb
Mg
Ni
Na
CN-
SAMPLESAFFECTED
All Samples
All Samples
All Samples
All Samples ExceptMC0109,MC0110
MC0109,MC0110
All Samples ExceptMC0114,MC0118,MC0121,MC0124,MC0125,MC0127
All Samples ExceptMC0113,MC0131
All Samples Except
POSITIVE DETECTEDVALUES VALUES
UL
B
K
J
B
B
B
B
BIAS
Low
High
High
High
High
High
High
COMMENTS*
MSL(3LO%)PBN(-0.473 mg/Kg)
MSH(176.4%)
ISD(24.1%)
RB(112ng/L)ISD(24.1%)
FB (4.8
FB(1190ng/L)LCH(331.4%)
RB(1.4|Ag/L)MC0118
* See explanation of Comments on Table IB.
Page 9 of 14
CASE: 30647SDG#: MC0128
TABLE1ASUMMARY OF QUALIFIERS ON DATA SUMMARY
FORM AFTER DATA VALIDATION
NON-
ANALYTE
Sb
Be
SAMPLESAFFECTED
All Samples
MC0128
MC0129,MC0130,
POSITIVE DETECTEDVALUES VALUES
UL
B
B
BIAS
Low
High
High
COMMENTS*
MSL(47.2%)
CCB(0.3 pg/L)
CCB(0.2 ng/L)
Ca
Hg
Ni
Se
Na
.Zn
MC0133.MC0136,MC0139
All Samples ExceptMC0132,MC0138
All Samples
All Samples ExceptMC0128,MC0134,MC0135,MC0138
MC0128, MC0129,MC0130,MC0132
All Samples ExceptMC0133
All Samples
All Samples ExceptMC0128.MC0135,MC0136
B
B
B
J
B
UL
High RB (851
Mixed MSL(70.9%)CRH(135.0%)
High FB (4.8
Low CRL(89.2%)
High FB(1190fig/L)LCH(336.9%)
ISD(19.6%)
High , RB(1.4ng/L)
* See explanation of Comments on Table IB.
Page 10 of 14
TABLE1ASUMMARY OF QUALIFIERS ON DATA SUMMARY
FORM AFTER DATA VALIDATIONCASE: 30647SDG#: MC0143
SAMPLESANALYTE AFFECTED
NON-POSITIVE DETECTEDVALUES VALUES BIAS
Ni
Se
All Samples ExceptMC0143, MC0146,MC0147.MC0155,MC0158, MC0159
All Samples ExceptMC0156,MC0158,MC0159,MC0163
MC0163
MC0156.MC0158,MC0159
B
UL
High
Mixed
Low
COMMENTS*
Sb
Be
Ca
Mg
Mn
All Samples ExceptMC0163
MC0163
MC0152
All Samples ExceptMC0146,MC0149,MC0155,MC0158
MC0163
All Samples
^
L
B
B
B
B
J
UL Low
High
High
High
MSL(49.5%)
CCB(2.6 |ig/L)MSL(49.5%)
CCB(0.2 ^g/L)
RB(851 jig/L)
RB(112iig/L)
DUP(101.8%)MSE(-15.5%)
FB (4.8 jig/L)
Mixed MSL(74.0%)CRH(113.0%)
MSL(74.0%)CRH(118.5%)
MSL(74.0%)
* See explanation of Comments on Table IB.
Page 11 of 14
TABLE 1ASUMMARY OF QUALIFIERS ON DATA SUMMARY
FORM AFTER DATA VALIDATIONCASE: 30647SDG#: MC0143
ANALYTE
Na
Zn
SAMPLESAFFECTED
All Samples ExceptMC0157
All Samples
All Samples ExceptMC0150,MC0151,MC0154
MC0150.MC0151,MC0154
NON-POSITIVE DETECTEDVALUES VALUES BIAS
B
J
B
High
UL
High
Low
COMMENTS*
FB(1190tig/L)LCH(352.6%)
ISD(13.8%)
RB(1.4ng/L)CHT(8.0 °C)
CHT(8.0
* See explanation of Comments on Table IB.
Page 12 of 14
TABLE 1ASUMMARY OF QUALIFIERS ON DATA SUMMARY
FORM AFTER DATA VALIDATIONCASE: 30647SDG#: MC0153
ANALYTE
Al
Sb
Be
Ca
SAMPLESAFFECTED
MC0170,MC0172,MC0174,MC0176,MC0178,MC0180,MC0182
MC0171,MC0173,MC0175,MC0177,MC0179,MC0181,
All Samples
MC0153
MC0164,MC0165,MC0166.MC0167,MC0168.MC0169
MC0170,MC0172,MC0174,MC0176,MC0178,MC0180,MC0182
MC0171,MC0173,MC0175,MC0177,MC0179,MC0181,
All Samples ExceptMC0164.MC0165,MC0169, MC0174,MC0175.MC0178
MC0164,MC0165,MC0169,MC0174,MC0175,MC0178
NON-POSITIVE DETECTEDVALUES VALUES BIAS
K High
L
B
B
B
B
COMMENTS*
CVH(110.4%)
UL Low MSL(35.2%)
High CCB(0.4 iig/L)
High CCB(0.5 jig/L)
High CCB(0.6 jig/L)
High RB(851ng/L)ISD(23.0%)
ISD(23.0%)
See explanation of Comments on Table IB.
Page 13 of 14
CASE: 30647SDG#: MC0153
TABLE 1ASUMMARY OF QUALIFIERS ON DATA SUMMARY
FORM AFTER DATA VALIDATION
ANALYTE
Cr
Cu
Mg
Ni
K
Se
Na
SAMPLESAFFECTED
All Samples
MC0181
MC0177
All Samples ExceptMC0164
All Samples
All Samples ExceptMC0153.MC0180
MC0153
MC0180
MC0153,MC0164,MC0165.MC0166,MC0167,MC0169
MC0170.MC0171,MC0172.MC0173,MC0174,MC0175,MC0176,MC0177,MC0178.MC0179,MC0180,MC0181,MC0182
NON-POSITIVE DETECTEDVALUES VALUES BIAS
J
B
B
B High
L
B
B
UL
UL
Low
Low
Low
High
High
COMMENTS*
ISD(12.6%)
FB (2.9 jig/L)
RB(112ng/L)
FB (4.8 |ig/L)
ISD(10.7%)
CRL(78.5%)PBN(-0.562 mg/Kg)
CRL(88.4%)PBN(-0.562 mg/Kg)
CRL(78.5%)
FB(1190ng/L)
CBN(-492.8 jig/L)
See explanation of Comments on Table IB.
Page 14 of 14
TABLE1ASUMMARY OF QUALIFIERS ON DATA SUMMARY
FORM AFTER DATA VALIDATIONCASE: 30647SDG#: MC0153
ANALYTE
Tl
Zn
ON'
SAMPLESAFFECTED
All Samples ExceptMC0177.MC0180
MC0177,MC0180
MC0166.MC0171
All Samples ExceptMC0153
MC0153
NON-POSITIVE DETECTEDVALUES VALUES BIAS
UL • Low
B High
L Low
B High
UL Low
COMMENTS*
MSL(72.6%)
CCB(7.6MSL(72.6%)
CRL(84.2%, 82.8%)
CHT(8.0
CHT(8.0
See explanation of Comments on Tabie IB.
Page 1 of2
TABLE IBCODES USED IN COMMENTS COLUMN
MSB = Matrix spike recoveries were extremely low (<30%) [% recoveries are inparenthesis]. Reported results may be biased extremely low. Quantitation limitsare unusable.
CRH = CRDL standard recoveries were high (>110%) [% recoveries are in parenthesis].Reported results which are <2XCRDL may be biased high.
RB = Rinsate blanks had results > IDL (results are in parenthesis). Reported resultswhich are less than five times (<5X) blank concentrations may be biased high.
MSH = Matrix spike recoveries were high (>125%) [% recoveries are in parenthesis].Reported results may be biased high.
ISD = Percent differences (%Ds) for ICP serial dilution analyses exceeded control limits(10%) [% Ds are in parenthesis]. Reported results are estimated.
FB = Field blanks had results > DDLs (results are in parenthesis). Reported results whichare less than five times (<5X) the blank concentration may be biased high.
MSL = Matrix spike recoveries were low (<75%) [% recoveries are in parenthesis].Reported results and quantitation limits may be biased low.
CCB = Continuing calibration blanks had results > IDLs (results are in parenthesis).Reported results which are less than five times (<5X) the blank concentration maybe biased high. !
LCH = Laboratory Control Sample (LCS) recoveries were high (>120%) [% recoveries arein parenthesis]. Reported results may be biased high.
CHT = The sample cooler temperature was outside the required temperature range (4 °C ±2°C) [sample cooler temperature is in parenthesis]. Reported results andquantitation limits may be biased low.
PEN = Preparation blanks had negative results with absolute values greater than the IDLs(results are in parenthesis). Reported results less than two times (<2X) the absolutevalue of the blank and quantitation limits may be biased low.
CRL = CRDL standard recoveries were low (<90%) [% recoveries are in parenthesis].Reported results which are <2XCRDL and quantitation limits may be biased low.
PB = Preparation blanks had results > IDLs (results are in parenthesis). Reported resultswhich are less than five times (<5X) the blank concentration may be biased high.
Page 2 of 2
TABLE IBCODES USED IN COMMENTS COLUMN
DUP = The Relative Percent Difference (RPD) for the laboratory duplicate analysis wasoutside control limits (35%, ±2XCRDL) [RPD is in parenthesis]. Reported resultsare estimated.
CBN = Calibration blanks had negative results with absolute values greater than the IDLs(results are in parenthesis). Reported results less than two times (<2X) the absolutevalue of the blank may be biased low.
CVH = Continuing calibration verification standard recoveries were high (>110%) [%recoveries are in parenthesis]. Reported results may be biased high.
APPENDIX A
Glossary of Qualifier Codes
GLOSSARY OF DATA QUALIFIER CODES (INORGANIC)
CODES RELATED TO IDENTIFICATION(confidence concerning presence or absence of analytes):
U = Not detected. The associated number indicates approximate sample concentrationnecessary to be detected.
(NO CODE) = Confirmed identification.
B = Not detected substantially above the level reported in laboratory or field blanks.
R = Unusable result. Analyte may or may not be present in the sample. Supporting datanecessary to confirm result.
CODES RELATED TO OUANTITATION(can be used for both positive results and sample quantitation limits):
J = Analyte Present. Reported value may not be accurate or precise.
K = Analyte present. Reported value may be biased high. Actual value is expected to belower.
L = Analyte present. Reported value may be biased low.Actual value is expected to be higher.
[ ] = Analyte present. As values approach the IDL the quantitation may not be accurate.
UJ = Not detected, quantitation limit may be inaccurate or imprecise.
UL = Not detected, quantitation limit is probably higher.
OTHER CODES
Q = Ne analytical result.
APPENDIX B
Data Summary Forms
DATA SUMMARY FORM: INORGANIC Page _1 of _28
Case #: 30647
Site:
Lab.:
SDG: MC0002
VALMONT TCE
LIBRTY
Number of Soil Samples: 20
Number of Water Samples: 0
Sample Number':
Sampling Location :
Rek) QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%Sdids:
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE
CRDL
40
12
2
40
1
1
1000
2
10
5
20
0.6
1000
3
0.1
8
1000
1
2
1000
2
10
4
0.5
MC0002
SB-AOO-O406
Soil
mg/Kg
06/24/2002
09:25
86.9
1.0
Result
12300
4.1
[24.9]
[0.29]
[0.16]
[147]
14.4
[0.79]
14.4
20200
12.6
[217]
21.3
[0.067]
(2-4][684]
1.1
[51.1]
24.2
9.6[0.053]
Flag
R
B
K
J
K
B
B
B
JB
MC0004
SB-DOO-0206
Soil
mg/Kg
06/24/2002
09:55
84.1
1.0
Result
13600
4.2
[35.5]
[0.38]
[0.16]
[171]
17.9
13.3
21.3
21800
18.3
[476]
160
[0.088]
[8.4]
[918]
[1.13
[74.9]
26.9
22.2[0.058]
Flag
R
B
K
J
K
B
B
J
B
MC0012
SB-J100-0205
Soil
mg/Kg
06/24/2002
11:25
91.9
1.0
Result
7020
3.7
[17.2]
[0.20]
[0.094]
[141]
8.4
[1.5]
10.9
12200
7.2
[295]
44.0
[0.059]
[3.1]
[515]
[0.71]
[55.7]
14.4
14.5
Flap
R
K
B
K
J
K
B
B
B
J
UL
MC0014
SB-J200-0204
Soil
mg/Kg
06/24/2002
11:50
89.9
1.0Result
9750
3.9[23.8]
[0.32]
[0.12]
[300]
13.3
[3.7]
16.8
17000
10.0
[791]
151[0.070]
[5.6]
[712]
1.1
[69.1]
19.0
20.6
Flag
RK
B
KJK
B
B
JUL
MC0015
SS-J250-0002
Sofl
mg/Kg
06/24/2002
12:15
88.9
1.0
Result
9630
3.9P5.2]
[0.33]
[0.23]
4150
20,1
[3-3]
20.6
16500
23.7
[867]
120[0.055]
[6.5]
[686]
[1.0]
[226]
18.3
112(0.0601
Flag
RK
KJK
B
B
JB
CRDL = Contract Required Quantitation Limit
To calculate sample quantitation limits: (CRDL * Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page_2 <rf_28_
Case ft 30647
Site:
Lab.:
SOG: MC0002
VALMONTTCE
LIBRTY
Sample Number :
Sampling Location :
FteWQC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%SoHds:
Dilution Factor:
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
. .CHROMIUMCOBALT
/COPPER.
IRON
•LEAD ; -
MAGNESIUM
.MANGANESE
MERCURY
NICKELPOTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE • . .
CRDL
40
12
2
401
'. . 1 ,
1000
2
10
5
20
0.6
1000
3
0.1
8
1000
'• --.t2
1000
2
10
4
0.5
MC0017
SB-J250-0709
Field Dup. of
MC0018
Sofl
mg/Kg
06/24/2002
12:25
80.4
1.0
Result
8580
[2.1]
119.4]
(0.46]
[0.17]
[392]
,. 20.2
[2.3]
27.3
27500
18.9
[359]
58.3
[0.067]
[6.0]
[863]
... [1.1]
[86.9]
20.5
29.9- fO.049]
Flap,
R
K
B
K
J
K
B
B
JB:
MCOQ1B
SB-DUP-01
Field Dup. of
MC0017.
Soil
mg/Kg
06/24/2002
12:30
84.9
1.0
Result
13800
[2.0]
H8.6]
[0.37]
[0.26J
[228]
20.8
[1.3]
27.7
31700
16.2
[389]
38.6
[0.093]
[5.7]
[846]
1.5
[57.81
27.4
19.9
Flap
R
K
B
K
J
K
B
B
J
UL
MC0020
SB-GOO-0206
Soil
mg/Kg
06/24/2002
10:45
87.4
1.0
Result
11900
8.0
61.4
[0.48]
[0.18]
[171]
18.2
[4.0]
26.6
23800
12.9
[574]
108
[0.075]
17.8]
[783]
(1.11
[89.4]
23.9
28.8
{0.0511 .
Ftafl
R
B
-
K
J
k
B
B
JB
MC0021
SS-J300-0002
Sodmg/Kg
06/24/2002
13:05
93.3
1.0Result
4950
3.2:puoj[0.25]
; [0.10]
1210
9.2
[3.0]
10.4
10600
8.8
[1020]
• 188
[0.052]
[7.9]
[626]
1.2
[109]
19.6
32.1
Flap
R
K
K
J
K
B
B
J
UL
MC0022
SB-J300-0203
Soil
mg/Kg
06/24/2002
13:10
86.3
1.0
Result
13200
4.4
[21.5]
[0.28]
= [0-17]
1161]
18.6
[0.96]
18.8
20000
14.7
[233]
20.1
[0.094]
[2.7]
[745]
1.2
[61.1].
27.7
12.3
[0.0921
Flag
R
K
B
K
J
K
B
B
B
J
BCRDL = Contract Required Quanfflafon Limit
To calculate sample quantitatton limits: (CRDL * Dilution Factor) / (%SoDds/100)SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page _3 of 28
Case tt 30647
Site:
Lab.:
SDG: MC0002
VALMONTTCE
LIBRTY
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%SoKds:
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE.
CRDL
40
12
2
401
1
1000
2
10
.5
20
0.6
1000
3
0.1
8
1000
1
2
1000
2
10
4
0.5
MC0023
SS-J400-0002
Sonmg/Kg
06/24/2002
13:25
83.9
1.0Result
13700
10.0
[27.2]
[0.32]
[0.12]
[223]
15.8
[2.4]
21.6
17900
22.0
[275]
42.0
0.14
[3.8]
[798]
[0.81]
. [57.1]
26.8
11.6(0.069]
Flat,
R
B
KJk
6
B
B
JB
MC0024
SB-J400-0205
Soil
mg/Kg
06/24/2002
13:30
87.8
1.0
Result
7130
3.7
[14.6]
[0.14]
[192]
8.7[2.8]
9.99250
12.2
[206]
48.5
[0.083]
[2.0]
[588]
[0.47]
(51.7]
13.4
6.6[0.057]
Flap
RK
B
KJK
B
B
B
JB
MC0025
SS-J450-0002
Soil
mg/Kg
06/247002
13:45
92.8
1.0
Result
7300
4.2
[37.0]
[0.36]
[0.14]
[1040]
10.8
[6.1]
14.6
17800
11.1
1620
351
[0.068]
13.2
[636]
10.72]
1129]
12.4
45.3
Flafl
R
K
K
J
K
B
B
J
UL
MC0027
SS-I500-0002
Son
mg/Kg
06/24/2002
14:10
85.8
1.0Result
14100
5.8[26.6]
[0.33]
[0.14]
[254]
18.4
[1.1]
17.1
21300
14.3
[291]
24.2
[0.099]
[3.4]
(722]
[1.1]
(49.8]
28.6
12.9
(0.0421
Flafl
R
B
KJK
B
J
B
J
B
MC0028
SS-H525-0002
Soil
mg/Kg
06/24/2002
14:30
90.8
1.0Result
9860
15.6
[34.1]
[0.42]
[0.31]
[1060]
12£[4.1]
19.0
21200
24.0
[940]
3450.18
(8-0][874]
3.3
[159]
18.2
34.4
[0.0621
Flag
R
KJK
L
B
JB
CRDL = Contract Required Quantitatkxi Limit
To calculate sample quantitation limits: (CRDL * Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page_4 of_28_
Case ft 30647Site:Lab.:
SDG:MC0002
VALMONTTCELIBRTY
Sample Number :
Sampling Location :RetdQC:
Matrix:Units:
Date Sampled :Time Sampled :%Sdids:Dilution Factor :ANALYTEALUMINUM
ANTIMONYARSENIC
BARIUMBERYLLIUMCADMIUMCALCIUMCHROMIUMCOBALT
'. COPPERIRON
•LEADMAGNESIUM
MANGANESEMERCURY
NICKELPOTASSIUM
SELENIUM , ;SILVER
SODIUMTHALLIUM
VANADIUMZINCCYANIDE
CRDL40
122
4011
1000
210
. 5200.6
10003
0.18
100012
10002
104
0.5
MC0029
SB-H525-0205
Soilmg/Kg06/24/2002
14:4084.7
1.0Result15100
5.0
[24.0][0.25]
[0.16][211]19.3
[0.98]
19.623300
12.8[263]20.4
[0.081]
[2-9][747]
[0.98]
[61.9]
29.9
14.3
Flap
R
B
K
JK
a
J
B
JUL
MC0030SS-G500-0002
Field Dup. ofMC0031Solmg/Kg
06/24/2002
15:1585.11.0
Result12800
4.6[31.0]10.25]
[0.15][176]14.8[1.7]
16.117800
12.1
[458]
51.4
[0.089]
[4.2]
[720]
[0.98]
[87 -2]
24.6
14.3
[0.0741
Flaf)
R
B
K
J
K
B
J
B
JB
MC0031SS-DUP-01
Field Dup. ofMC0030Soilmg/Kg
06/24/200215:2087.4
1.0Result14000
4.7
[31.3][0.27]
[0.10][200]16.3{2.0]
16.918400
11.6[556]49.9[0.11]
[5.2][796][0.68]
[96.8]
26.017.1
[0.079]
Flag
R
B
KJK
B
J
B
JB
MC0032SB-G500-0206
Soil
mg/Kg06/24/200215:2585.41.0
Result13800
4.7
[32.7110.27]
[0.12][156]16.2
t.1.3]17.4
1980013.9[335]
32.3[0.060]
[3-8][781]
[0.88]
.[68.1]
27.613.2
[0.047]
Flag
R
B
KJK
B
J
B
JB
MC0033SB-G500-0911
Soilmg/Kg
06/24/200215:3083.7
1.0Result
8290
3.8
neJzj[0.30]
[158]11.5
[0.62]
18.217200
17.0[157]
15.2[0.091]
[1-9][663]
1.6
157.5]
18.67.2
[0.060]
Flag
RK
B
KJ
K
B
J
B
J
BCRDL = Contract Required Quantitation Limit
. To calculate sample quantitation limits: (CRDL • Dilution Factor) / (%Sdids/100)
SEE NARRATIVE FOR CODE DEFINITIONSRevised 09/99
DATA SUMMARY FORM: INORGANIC Page_5 of_28
Case #: 30647
Site:
Lab.:
SDG: MC0035
VALMONTTCE
LIBRTY
Number of Soil Samples: 0
Number of Water Samples: S
Sample Number :
Sampling Location :
RefcJQC:
Matrix:
Units:
Date Sampled :
Time Sampled :
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
•ARSENIC
BARIUM
BERYLLIUM
•CADMIUM
CALCIUM
•CHROMIUM
COBALT
.COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
^NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
•CYANIDE
CRDL
20060
10200
55 „
5000
10SO25
1003
5000
15
0.240
5000
510
5000
105020
10
MC0035
FB-01
Fiek) Blank
Water
ug/L
06/24/2002
12:45
1.0Result
[30.9]
-. [1-1]
[376]
[1.6]
[38.8]
[71.7]
[536]
[2.4]
FlaflB
B
B
UL
B
UL
B
B
UL
MC0141
RB-01
Rinsate Blank
Water
ug/L
06/28/2002
12:00
1.0Result
[74.2]
[1.5]
[851]
[0.96]
[2.8]
[72.8]
[112]
[1.0]
[1160]
[2.8]
[1.4]
Flap
B
L
ULB
-
BB
MC0142
FB-02
Field Blank
Water
ug/L
06/28/2002
13:00
1.0Result
[74.2]
[1.8]
[832]
[0.65]
[2.9]
[93.3]
[109]
[1.2]
[4.8]
[1190]
[2.1]
[0.92]
Flap
B
L
ULB
BB
MC0184
RB-02
Rinsate Balnk
Water
ug/L /
06/28/2002
16:00
1.0Result
[0.32]
(1.0J
[15.9]
[62.0]
[2.1]
[1.8]
Flag
B
L
BULB
B
UL
MC0185
FB-03
Field Blank
Water
ug/L
06/28/2002
12:15
1.0Result
[0.57]
11.0]
[64.0]
-
[2.7]
Flag
B
L
ULB
BQ
CRDL = Contract Required Quantitation Limit
To calculate sample quantitation limits: (CRDL * Dilution Factor)
'Action Level Exists SEE NARRATIVE FOR CODE DEFINITIONSRevised 09/99
DATA SUMMARY FORM: INORGANIC Page_6 ot_28_
Case ft 30647
Site:
Lab.:
SOG: MC0069
VALMONTTCE
LIBRTY-
Number of Soil Samples: 20
Number of Water Samples: 0
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled:
Time Sampled :
%So«ds:
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
.BARIUM
BERYLLIUM
CADMIUM
CALCIUM
.CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
: SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE
CRDL
40
12
2
40
1
1
1000'
2
10
5
20
0:6
1000
3
0.1
8
1000
.1'
2
1000
2
10
4
0.5
MC0069
SS-B3SO
Soil
mg/Kg
06/26/2002
10:30
91.2
1.0
Result
9570
[0.54J
4.6
[33.4J
[0.33]
[482]
11.7
[4.0]
12.8
15800
13.4
[886]
286
[6.9]
[480]
[0.64]
[54.8]
18.0
26.4
(0.0.99}.
Flap
B
J
B '
B
L
UL
K
B
UL
B
MC0070
SB-B350-0206
Soil
mg/Kg
06/26/2002
10:35
92.2
1.0
Result
4750
[0.45]
2.2
[14.1]
[0.21]
[35.2]
7.5
[0.70]
[4.0]
8110
10.2
[131]
19.8
[1.8]
[444]
[0.54]
[62.0]
[9.2]
6.4
[0.0531
Flafl
B
J
B
B
L
UL
B
K
B
UL
L
B
MC0071
SB-B 350-0607
Soil
mg/Kg
06/26/2002
10:40
88.7
1.0
Result
8530
[0.52]
3.8
[19.6J
[0.38]
[50.6]
10.3
[0.98]
7.3
15000
12.9
[160]
21.6
[2-3]
[583]
[0.76]
[63.2]
16.8
11.7
[0.0351
Flag
B
J
B
L
UL
B
K
B
UL
B
MC0072
SS-B325
Soil
mg/Kg
06/26/2002
10:50
87.0
1.0
Result
9700
[0.53]
5.0
55.0
[0.55]- -:
1320
12.9
[6.7]
23.2
21900
20.7
1700
717
9.9
[471]
1.3
[83.2]
19.7
53.2
[0.25]
nafl
B
J
L
UL
K
B
UL
B
MC0073
SB-B325-0206
SoU
mg/Kg
06/26/2002
10:55
91.8
1.0
Result
6180
[0.55]
3.0
[17.6]
[0.21]
(81.8]
7.0
[5.2]
7.5
10000
7.8
[784]
191
[5.1][368]
[0.48]
[159]
11.9
14.7
[0.0661
Flag
B
J
B
B
L
UL
B
K
B
UL
B
CRDL = Contract Required Quantitation Limit
To calculate sample quantttation limits: (CRDL * Dilution Factor) / (%Sol'ds/ 100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page _7__ of _28_
Case* 30647Site:
Lab.:
SDG: MC0069
VALMONTTCE
LIBRTY
Sample Number:
Sampling Location :
FtetdQC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%Sdkls:
Dilution Factor :
ANALYTEALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM .
.CHROMIUM
COBALT
COPPER
IRON
•tEAD
MAGNESIUM
MANGANESE
MERCURY
NICKELPOTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
'VANADIUMZINCCYANIDE
CRDL
40
12
2
401
1
1000
2
10
5
20
0.6
1000
3
0.1
a1000
12
1000
2
104
O.S
MC0074
SS-B100
Soil
mg/Kg
06/26/2002
11:15
82.0
1.0
Result
7670
>[0.63]
3.0[32.6]
[0.20]
2690
12.3
[2-0]
8.8
11800
24.6
[728]
135
[4.4]
[431]
[0.84]
[72.1]
17.0
43.2[0.25]
Flag
BJ
B •
LULe
K
B
UL
B
MC0075
SB-B100-0206
Field Dup. of
MC0076
Soilmg/Kg
06/26/2002
11:20
87.7
1.0
Result
13000
10-41]4.5
[35.0]
[0.35]
[24.5]
16.6
[1.2]
10.4
21400
12.9
[299]
27.2
[3.2]
[615]
166.9]
26.6
12.2
Flap
BJ
B
LUL
B
BUL
MC0076
SB-DUP-03
Field Dup. of
MC0075
Soilmg/Kg
06/26/2002
11:2388.21.0
Result
11200[0.66]
4.1
[29.6][0.30]
[182]16.7[1.7]
9.4
18600
10.9[493]
51.6
[4.4][548]
[0.65]
[142]
22.513.9
[0.036]
Flag
BJ
B
B
LUL
B
K
BUL
B
MC0077
SB-B100-0608
Soilmg/Kg
06/26/2002
11:2582.51.0
Result
19100, 10.93]
5.8[34.2][0.24]
[18.6]
23.2
[1.0]11.4
27000
11.7[269]
10.t
[2.9][451][0.82]
37.0
10.3
Flag
BJ
B
B
-
LULB
K
UL
MC0079
SB-D300-0206
Soilmg/Kg
06/26/2002
11:5586.21.0
Result
11800
[0.55]
3.5124.9]
10.27]
[30.6]
23.9[1.6]
8,327300
10.8[429]59.7
[3.3][390][0.90]
[65.3]
33.512.5
[0.0481
Flag
BJ
B
B
LULB
K
BUL
BCRDL = Contract Required Quantitatton Limit
To calculate sample quantitatton limits: (CRDL * Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page _8 of _28
Case #: 30647
Site:
Lab.:
SDG: MC0069
VALMONTTCE
LIBRTY-
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%So»ds:
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
. CHROMIUM
COBALT
; COPPER
IRON
>LEAD;
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
. VANADIUM
ZINC
CYANIDE
CRDL
4012
2401
11000
2
105
200.6
1000
30.1
81000
12
1000
2
104
0.5
MC0080
SB-D300-1012
•
Soil
mg/Kg
06/26/2002
12:00
64.2
1.0Result
6050
[0.48]
[1.9]
[30.2]
[0.66]
[146]
14.5
[1.3]
23.9
18800
15.2
[148]
44.8
[2.1]
[693]
[0.72]
[92.0]
19.9
9.9
Flaq
BJ
B
L
ULB
K
B
UL
MC0081
SS-E300-0002
Soil
mg/Kg
06/26/2002
12:20
89.2
1.0Result
7800
2.7[17.7]
[0.18]
[1080]
10.2
[2.2]
7.512700
8.2[718]
96.0
[4.3]
[462]
[0.92]
[90.7]
15.8
14.9
(0.040]
Flafl
ULJ
B
LULB
K
BUL
B
MC0082
SB-E300-0206
Soil
mg/Kg
06/26/2002
12:25
82.7
1.0Result
18100
. [0:69],
4.9
46.4
[0.26]
[312]
20.6
[2.8]
13.1
22400
13.4
1560
49.9
[7.9]
[604]
1.4
[84.5]
33.3
23.9
[0.070]
Flafl
BJ
B
B
LUL
K
B
UL
B
MC0083
SB-E300-1012
Soil
mg/Kg
06/26/2002
12:30
92.5
1.0Result
4290
10-38}
[1.3]
[23.21
[0.30]
[39.9]
7.718.7
12.8
18000
8.6[79.3]
306
n. n[424]
[0.76]
[37.9]
11.9
12.5
Flag
BJ
B
B
LULB
K
BUL
MC0084
SS-0225-0002
Soil
mg/Kg
06/26/2002
13:10
85.2
1.0Result
7240
12.0]
I17.3J
[0.11]
[488]
8.2[1.0]
[4.5]
10200
6.8[355]
47.6
[2.2]
[309]
[0-67]
[72.2]
15.3
10.5
[0.081]
Flag
ULJ
B
B
LUL
B
K
BUL
BCRDL = Contract Required Quantitatton Limit
To calculate sample quantitation limits: (CRDL • Dilution Factor) / (%Sofids/ 100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page_9 of_28
Case ft 30647
Site:
Lab.:
SDG:MC0069
VALMONTTCE
LIBRTY
Sample Number :
Sampling Location :
Field QC:
Matrix: .
Units:
Date Sampled :
Time Sampled :
%SolkJs:
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM.
COBALT
COPPER
IRONTEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINCCYANIDE
CRDL
40
12
2
401
1
1000
2
10
5 "„20
0.6-
1000
3
0.1
a1000
12
1000
2
10
4
0.5-
MC0085
SB-D225-0206
Soil
mg/Kg
06/26/2002
13:15
86.8
1.0
Result
9630
[0.57]
3.0
[27.0J
[0.18]
[539]
14.0
[2.0]
7.8
17900
9.8
[459]
52.6
[3.4]-
[417]
[0.98]
186.6]
21.1
11.7
W.095]
Flag
B
J
B •
B
L
UL
B
k
B
UL
8
MC0086
SB-D225-1012
Soil
mg/Kg
06/26/2002
13:20
92.0
1.0
Result
3540
[0.61]
[1.9]
111.0]10.13]
[123]
4.9
[2.5]
8.2
10700
5.6
[71.6]
20.2
[0.77]
[360]
[0.55] ;
[59.4]
[9-3]
4.7
[0.0461
Flat)
B
J
B
B
B
L
UL
B
K,
B
UL
L
B
MC0087
SS-F400-0002
Soil
mg/Kg
06/26/2002
13:40
89.1
1.0
Result
8140
2.8
[21.8]
[0.19]
[150]
12.8
[1.4]
7.2
15100
7.8
[482]
62.5
[3.4]
[378]
[95.8]
18.5
12.9
Flap
UL
J
B
B
L
UL
B
UL
B
UL
MC0088
SB-F400-0206
Soil
mg/Kg
06/26/2002
13:45
85.8
1.0
Result
11000
3.2
129.4J
[0.30]
[8.6]
15.7
[1.1]
11.5
18400
11.0
[262]
22.3
[2-8]
[403]
[40.3]
25.3
10.2
[0.067]
Flaq
UL
J
B
,
B
L
UL
B
UL
B
UL
B
MC0089
SB-F400-0608
Soil
mg/Kg
06/26/2002
13:50
86.7
1.0
Result
9320
2.8
123.8]
10.21]
[49.2]
14.4
[0.96]
10.9
16600
9:7
[187]
13,4
[2.2]
[320]
[233]
22.2
9.6
Flag
UL
J
B
B
-
L
UL
B
UL
B
UL
CRDL = Contract Required Quantitation Limit
To calculate sample quantitation limits: (CRDL * Dilution Factor) / (%SolWs/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page _10 of _28
Case #-. 30647Site:
Lab.:
SDG : MC0078
VALMONT TCE
LIBRTY
Number of Soil Samples : 20
Number of Water Samples : 0
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%Solids :
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
' MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINCCYANIDE
CRDL
40122
4011
1000
2
105
200.6
1000
30.1
81000
12
1000
2104
0.5
MC0078
SS-D300-0002
Soil
mg/Kg
06/26/2002
11:50
89.0
1.0Result
6960
[0.73]
2.4
H9.9]
[0.33]
[183]
8.4
[1.6]
[5.0]
10400
9.5[499]
109
[3.6]
[322]
[77.9]
14.5
13.2
[0.079]
Flag
B
B •
B
L
B
BUL
B
MC0090
SS-E400-0002
Soil
mg/Kg
06/26/2002
14:20
90.2
1.0Result
7400
[0.55]
2.8[23.4]
[0.27]
[228]
10.4
12.3]
5.610400
11.2
[470]
104
[3.9]
[314]
[75.7]
16.0
16.6
Flafl
B
B
B
L
B
BUL
MC0091
SB-E400-0206
Soil
mg/Kg
06/26/2002
14:25
89.0
1.0Result
7920
[0.54J
3.3[21.7]
[0.37]
[27.8]
10.3
[3.7]
7.614600
7.5[784]
134
[5-4][421]
171-3]
16.6
16.9
[0.076]
Flafl
B""•
B
B
L
BUL
B
MC0092
SB-E400-1011
Soil
mg/Kg
06/26/2002
14:30
92.3
1.0Result
4210
2.2[11.0]
[0.24]
[9.4]
5.3[6.9]
6.78580
5.6[82.2]
95.8
[1.3]
[342]
[70.1]
[8.1]
[4.1][0.076]
Flafl
UL
B
B
B
L
B
BUL
L
B
MC0093
SS-D400-0002
Soil
mg/Kg
06/26/2002
14:45
84.1
1.0Result
8540
[0.48]
3.2
120.5]
[0.20]
[333]
9.6[0.88]
[3.6]
14300
8.8[346]
76.7
[2.3]
[247]
[0.84]
[106]
24.9
16.0
[0.10]
Flaq
B
B
B
L
B
K
BUL
B
CRDL = Contract Required Quantitation Limit
To calculate sample quantftation limits: (CRDL * Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page_11 of_28_
Case ft 30647
Site:
Lab.:
SDG: MC0078
VALMONTTCE
LIBRTY '
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%Sofids:
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
lEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE
CRDL
40
12
2
40
1
1
1000
2
10
5
20
0.6
1000
3
0.1
8
1000
1
2
1000
2
10
4
0.5
MC0094
SB-D400-0206
Soil
mg/Kg
06/26/2002
14:50
85.9
1.0 ..
Result
20200
[0.51]
5.7
[21.7J
[0.34]
[31.1]
22.5
[1.0]
11.7
24700
9.2
[305]
23.2
[0.092]
[3.1][419]
[0.94]
[59.0]
34.7
11.6[0.060]
Flag
B
B
B
L
B
K
B
UL
B
MC0095
SB-D400-0810
Soil
mg/Kg
06/26/2002
14:55
86.3
1.0
Result
13900
[0.55]
4.4
[15.6]
[0.26]
[10.8]
13.3
[1.2]
11.5
17800
10.6
[215]
31.2
[0.077]
[3.0]
[340]
[0.71]
[37.7]
22.3
8.0, [0.098]
Flafl
B
B
B
L
B
K
B
UL
L
B
MC0096
SS-C400-0002
Soil
mg/Kg
06/26/2002
15:15
92.0
1.0
Result
7450
[0.44]
2.9
[23.0J
10.26]
[7141
9.0
[2.1]
5.9
12400
13.0
[772]
63.6
[5.9]
[328]
[0.72]
[125]
14.1
26.6
[0.12]
Flag
B
B
B
L
,
K
B
UL
B
MC0097
SB-C400-0206
Soil
mg/Kg
06/26/2002
15:20
89.3
1.0
Result
10200
[0.38]
3.3
122.6]
[0.30]
[111]
10.2
[1.9]
7.9
13300
9.9
[457]
55.2
[3.5]
[444]
[0.52]
[102]
18.5
11.7
[0.111
Flaq
B
B
B
L
B
K
B
UL'
B
MC0098
SB-C400-0607
SoO
mg/Kg
06/26/2002
15:25
86.1
1.0
Result
24300
[0.74]
6.4
[25.41
[0.38]
[60.9]
26.8
[1.2]12.0
27100
11.6.
[291]
22.9
13.3]
[483]
[0.93]
[40.2]
40.8
12.9
[0.101
Rag
B
B
B
L
B
K
B
UL
B
CRDL = Contract Required Quantitatton LimH
To calculate sample quantitalion limits: (CRDL * Dilution Factor) / (%Solids/ 100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page_12 of_28
Case #-.30647
Site:
Lab.:
SDG: MC0078
VALMONTTCE
LIBRTY
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled:
Time Sampled :
%SoKds:
Dilution Factor:
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE
CRDL
40
12
2
401
1
1000, „ p
10
5200.6
1000
. 3
0.1
81000
12
1000
2
104
0.5
MC0099
SS-8450-0002
Sofl
mg/Kg
06/26/2002
15:35
89.7
1.0Result
6020
4.0
I17.2J
[0.21]
[175]
7.2[7.5]
[4.2]
10200
13.3
[584]
346
[5.0]
[398]
[82.9]
[9.8]
12.4
[0.057]
Flafl
UL
B '
B
L
8
B
UL
B
MC0100
SB-B450-0204
Field Dup. of
MC0101
Soil
mg/Kg
06/26/2002
15:40
93.3
1.0Result
5450
[0.47]
3.6
[18.4]
[0.23]
[202]
6.7
[1.9]
[3.9]
8440
9.5
[537]
61.9
[4.0]
[552]
[0.68]
[46.2]
[8.5]
11.4
Flafl
B
B
B
L
B
K
B
UL
MC0101
SS-OUP-03
Field Dup. of
MC0100
Soil
mg/Kg
06/26/2002
15:15
90.3
1.0
Result
7590
[0.45]
2.5
[19.4]
[0.21]
[94.5]
10.1
[1.0]
6.4
13700
6.6
[378]
44.5
[2.8]
[307]
[0.94]
[98.0]
16.7
11.4
ro.0641
Flslfl
B
B
B
L
B
K
B
UL
B
MC0102
SS-D450-0002
Sofl
mg/Kg
06/27/2002
07:45
87.1
1.0
Result
4680
[2.0]
[21.2]
[0.15]
[267]
5.2
[0.94]
(3.5]
7410
13.0
[190]
68.8
[1.8]
[171]
[0.56]
[96.3]
11.9
11.4
[0.11]
Flafl
UL
B
B
L
B
K
BUL
B
MC0103
SB-D450-0206
Soil
mg/Kg
06/27/2002
07:50
88.0
1.0Result
8920
10.49]
4.0f25.2J
[0.22]
[79.8]
13.9
[2.6]
6.715900
8.2[787]
77.5
(5.0]
[331]
(0.62]
[62,9].
18.4
16.2
[0.15]
Flag
B
B
B
L
B
K
BUL
BCRDL - Contract Required Quantrtatton Limit
To calculate sample quantitation limits: (CRDL ' Dilution Factor) / (%Sdids/ 100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page_l3 of 28
Case* 30647
Site:
Lab.:
SDG: MC0078
VALMONT TCE
LIBRTY
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%Solids:
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE
CRDL
40122
401
11000
2105
200.6
1000
30.1
81000
12
1000
2104
0.5
MC0104
SS-D450-0911
Sofl
mg/Kg
06/27/2002
07:55
88.3
1.0Result
6850
[0.47]
2.2[10.0]
10.16]
[20.5]
6.7[1.0]
[5.2]
7890
6.7[95.8]
31.4
[1.1]
[311]
[45.0]
[10.9]
[4.1]
[0.0651-
Flao,
B
B
B
BL
8
BUL
LB
MC0105
SS-E450-0002
Soil
mg/Kg
06/2712002
08:15
83.1
1.0Result
9720
[0.62]
3.3
[20.0]
[0.20]
[22.1]
14.6
[1.0]
8.018000
8.9[372]
42.7
I3.0]
[402]
[0.75]
[50.6]
21.9
11.0
[0.053]
Flafl
B
B
B
L
B
K
BUL
B
MC0106
SB-E450-0206
Soil
mg/Kg
06/27/2002
08:20
90.0
1.0Result
10500
[0.50]
3.4
[21.6]
[0.28]
[8.0]
17.1
[0.78]
13.6
22600
11.6
[169]
18.5
11.9]
[477]
1.3
[52.5]
25.8
9.6[0.0571
Flap,
B
B
B
L
B
K.
BUL
B
MC0107
SB-E450-0709
Soil
mg/Kg
06/27/2002
08:25
91.2
1.0Result
7540
fO-SSJ
3.6[17.6]
[0.22]
[64.0]
40.9
[3.5]
7.916200
10.2
[232]
88.8
[2.8]
[475]
[0.80]
[60.6]
15.2
7.9(0.048)
Flaq
B
B
B
1
B
K
BUL
L
B
MC0108
SS-I350-0002
Soil
mg/Kg
06/27/2002
08:40
85.7
1.0Result
7220
2.9
115.5]
[0.22]
[33.2]
10.5
10.53]
8.8
13800
11.4
[117]
14.3
[1.4]
[409]
[149]
16.2
7.8
Flag
UL
B
B
BL
B
BUL
L
CRDL = Contract Required Quantitation Limit
To calculate sample quantitation limits: (CRDL * Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page_i4 of_28
Case #-.30647
Site:
Lab.:
SDG : MC0109
VALMONT TCE
LIBRTY
Number of Soil Samples: 20
Number of Water Samples : 0
Sample Number :Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%So«ds :
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUMBERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKELPOTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINCCYANIDE
CRDL
40
12
2
401
1
1000
2
10
5
20
0.6
1000
3
0.1
8
1000
1
2
1000
2
10
4
0.5
MC0109
SB-1350-0206
Field Dup. of
MC0110
Soil
mg/Kg
06/27/2002
08:45
87.2
1.0
Result
9770
8.7
[16.9J[0.54]
[0.34]
[37.1]
19.4
[2.9]
16.9
44800
21.5
[109]
139
[0.052]
[2.5]
[595]
1.3
[69.3]
31.0
9.6
[0.043)
Flag
UL
B
K
B
B
B
B
MC0110SB-DUP-04
Field Dup. of
MC0109
Soilmg/Kg
06/27/2002
08:45
86.8
1.0
Result
7820
3.4
[13.3]
[0.24]
[0.17]
[42.6]
9.8
[0.62]
12.0
21400
10.6
[99.5]
30.6
[1.3]
[572]
[0.54]
[62.3]
17.3
6.4
[0.053]
Flap
UL
B
K
B
B
B
B
MC0111
SS-F450-0002
Soil
mg/Kg
06/27/2002
09:10
88.0
1.0
Result
5660
[2.1]
-122.1]
[0.12]
10.10]
(388)
6.7
[1.9]
7.0
9370
7.9
[290]
130
[2.0]
[432]
[85.0]
14.2
11.7
[0.0401
Flag
UL
B
K
J
B
B
B
MC0112
SB-F450-0206
Soil
mg/Kg •
06/27/2002
09:15
87.0
1.0
Result
9510
3^
[21.7]
[0.23]
[0.13]
[45.5]
11.4
[1.6]
14.9
15500
10.3
[432]
62.3
[3.9]
[642]
[54.3]
20.5
14.1
[0.098]
Flaq
UL
B
K
J
B
B
B
MC0113SB-F450-1012
Soil
mg/Kg
06/27/2002
09:2088.8
1.0
Result
10800
4.8115.5]
[050][0.14]
[24.9]
11.4
[1.2]
18.5
17400
10.6
[142]
21.9
[0.086]
[1.7]
[664]
20.8
8.1
[0.10]
Flao.
UL
B
K
J
B
B
CRDL = Contract Required Quantitatton Limit
. To calculate sample quantitation limits: (CRDL * Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page_i5 of_28_
Case #: 30647Site:Lab.:
SOG: MC0109
VALMONT TCE
LIBRTY
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
KSolids:
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY .
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE
CRDL
40122
401
1
1000
210
520
0.61000
30.1
81000
12
1000
2104
0.6
MCQ114
SS-G450-0002
Soil
mg/Kg
06/27/2002
09:40
84.7
1.0Result
15100
5.7
[36.0]
[0.25]
[0.18]
[69.0]
16.8
[3.0]
18.3
20400
10.8
1400
66.3
[7.5][665]
[0.90]
[76.1]
29.2
28.5[0.040]
Flag
UL
B
KJ
B
B
MC0115
SB-G450-0206
Soil
mg/Kg
06/27/2002
09:45
85.9
1.0
Result
15600
5.6
[34.9]
[0.32]
[0.19]
[54.7]
19.0
[1.5]
18.6
21100
12.5
[480]
28.6
[4.6]
[768]
[0.58]
[60.7]
31.6
17.2[0.0671
Flaq
UL
B
KJ
B
B
B
MC0116
SB-G450-1012
Soil
mg/Kg
06/27/2002
09:50
84.1
1.0Result
9650
8.1[17.4]
[0.59]
[0.21]
[33.5]
11.8
[1.3]
32.6
29500
13.4
[152]
45.6
- [2.9][754]
[0.71]
[84.1]
22.4
17.7
[0.072]
Flag
UL
B
KJ
B
B
B
MC0117
SS-H450-0002
Soil
mg/Kg
06/27/2002
10:15
88.5
1.0Result
12000
4.4
[22,4]
[0.30]
[0.20]
[563]
16.9
[0.72]
17.7
19400
13.6
[211]
29.4
[2.8]
[757]
[72.4]
25.7
11.7
[0.066]
Flag
UL
B
KJ
B
B!
B
MC0118
SS-G400-0002
Soil
mg/Kg
06/27/2002
10:40
89.1
1.0Result .
11000
4.2124.2]
[0.23]
[0.15]
[52.8]
12.4
[2.8]
16.5
15200
9.0[1030]
73.8
[6.9]
[658]
159.1]
20.7
21.1
Flag
UL
B
KJ
B
CRDL = Contract Required Quantitation Limit
To calculate sample quantitation limits: (CRDL * Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page_16 .of_28
Case #: 30647
Site:
Lab.:
SDG: MC0109
VALMONT TCE
LIBRTY
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%S<Xids :
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE
CRDL
40122
401
1
1000
210
520
0.6
1000
30.1
81000
1
21000
2104
0.5
MC0119
SB-G400-0206
Soil
mg/Kg
06/27/2002
10:45
86.2
1.0Result
14600
4.4
(28.1)
[0.25]
[0.21]
[26.4]
18.0
[1.0]
16.3
19300
13.4
[261]
21.1
13.6]
[752]
[50.2]
27.8
12.5[0.056]
Flap
UL
B
K
J
B
B
B
MC0120
SB-G400-1012
Soil
mg/Kg
06/27/2002
10:50
87.7
1.0Result
7910
5.2
114.8][0.16]
[23.8]
8.611.8
18.3
11600
12.6
[150]
169
[2.0]
[583]
[0.51]
[47.1]
17.5
8.4[0.094]
Flap
UL
B
KJ
B
B
B
MC0121
SS-E500-0002
Soil
mg/Kg
06/27/2002
11:05
83.8
1.0Result
13400
5.1(29.2]
[0.19]
[0.17]
[158]
16.0
[2.2]
16.8
21500
9.2[1000]
100[0.062]
[6.0]
[653]
[124]
28.9
24.6
fO.060]
Flap
UL
B
KJ
B
B
MC0122
SB-E500-0206
Soil
mg/Kg
06/27/2002
11:10
82.4
1.0Result
13700
4.6129.0]
[0.28]
10.21]
[48.2]
19.0
[1.1]
17.9
24700
12.9
[387]
38.8
0.12
[3.8]
(727]
(0.77]
[45.4]
29.6
14.0
[0.201
Flap
UL
B
KJ
B
B
B
MC0123
SB-E500-0911
Soil
mg/Kg
06/27/2002
11:15
88.6
1.0Result
13800
4.4
(19-31[0.21]
10.24]
(40.6]
19.3
(1.4]
17.3
21200
11.4
[209]
16.9
[2.6]
(637]
[0.80]
(48.5]
26.1
10.8
[0.0561
Flag
UL
B
KJ
B
B
BCRDL = Contract Required Quantitation Limit
To calculate sample quantitation limits: (CRDL * Dilution Factor) / (%Solids/ 100)SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page_17 of_28
Case #-.30647
Site:
Lab.:
SDG : MC0109
VALMONT TCE
LIBRTY
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%Sofids:
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE
CRDL
40122
401
1
1000
2105
200.6
1000
30.1
81000
12
1000
2104
0.5
MC0124
SS-E100-0002
Soil
mg/Kg
06/27/2002
12:30
89.7
1.0Result
12200
4.5[27.5J
[0.22]
[0.16]
[457]
15.1
[2.6]
16.6
18000
10.5
[945]
114
I6.6]
[645]
[59.0]
23.0
24.2
fO.16]
Flat)
UL
B
K
J
B
B
MC0125
SB-E100-0206
Soil
mg/Kg
06/27/2002
12:35
86.5
1.0Result
10500
4.0[27.1]
[0.19]
[0.19]
[766]
19.6
[2.2]
13.2
16900
10.7
[704]
96.9
[5.6]
[623]
[0.77]
[71.0]
22.2
19.9
(0.063)
Flag
UL
B
KJ
B
B
MC0126
SB-E100-0709
Soil
mg/Kg
06/27/2002
12:40
95.0
1.0Result
3030
[1.4]
[8.0]
[0.097]
[375]
6.1[1.1]
5.06250
5.9[289] .
30.6
[2.3]
[364]
[43.6]
[5.6]
7.0[0.049]
Flap
UL
B
KJ
B •
B
B
MC0127
SS-H 100-0002
Field Dup. of
MC0128
Soil
mg/Kg
06/27/2002
13:15
91.6
1.0Result
7950
4.7
[18.8]
[0.23]
[0.16]
[80.6]
10.3
[3.3]
15.7
14900
7.7
[965]
110
[6.2]
[514]
[62.9]
15.8
19.7
(0.0671
Flag
UL
B
KJ
B
B
MC0131
SB-F 150-0206
Soil
mg/Kg
06/27/2002
13:50
87.1
1.0Result
9510
2.5{19.9]
(0.20)
(0.19]
[202]
14.2
[0.75]
15.0
15500
11.2
[222]
18.6
[2.8]
[655]
[0.63]
20.9
12.3
(0.038]
Flag
UL
B
KJ
B
BCRDL = Contract Required Quantitation Limit
To calculate sample quantitation limits: (CRDL * Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC PageJB of_28
Case ft: 30647
Site:
Lab.:
SDG: MC0128
VALMONTTCE
LIBRTY
Number of Soil Samples: 11
Number of Water Samples : 0
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%Solids :
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE
CRDL
40
122
4011
1000
210
5200.6
1000
30.1
81000
1
2
1000
2
10 .
40.5
MC0128
SS-DUP-04
Field Dup. of
MC0127
Soil
.mg/Kg
06/27/2002
13:15
92.3
1.0..
Result
7450
3.8.
[18.4]
[0.21]
[0.11]
[141]
8.2[3.0]
15.1
12200
7.0[904]
102[0.068]
[5.9]
[493]
[37.7]
14.1
18.5
Ftefl
UL
B
B
J
UL
B
J
MC0129
SB-H100-0206
Soil
mg/Kg
06/27/2002
13:20
92.3
1.0Result
5100
3.1[15.5]
[0.20]
[0.17]
[589]
10.6
[4.1]
11.6
13800
7.4
[632]
219[0.050]
[4.7]
[440]
[40.0]
11.7
15.2[0.073]
Flacj
UL
B
B
J
B
UL
B
JB
MC0130
SS-F 150-0002
Soil
mg/Kg
06/27/2002
13:45
83.1
1.0Result
13900
6.0(25.6]
[0.16]
[0.34]
[87.2]
15.6
[1.2]
15.6
27000
10.7
[612]
50.8
[0.081]
[4.8]
[607]
[1.1]
[65.6]
27.3
20.7
[0.070]
Flaq
UL
B
B
J
B
L
B
JB
MC0132
SB-F1 50-0810
Soil
mg/Kg
06/27/2002
13:55
85.2
1.0Result
13400
4.5125.8]
[0.29]
[0.22]
2190
19.4
11.8]
20.2
22800
12.3
[419]
71.6
0.14
[4.4]
[804]
[0.90]
[42.5]
27.3
19.7
[0.11]
Flag
UU
J
B
L
B
JB
MC0133
SS-G200-0002
Soil
mg/Kg
06/27/2002
14:20
86.6
1.0Result
8860
2.4
118.0]
10.15]
10.19]
[93.8]
11.1
[1.6]
13.8
14500
7.0[609]
33.0
[0.077]
14.6][507]
17.2
15.9
[0.18]
Flag
UL
B
B
JB
JB
CRDL = Contract Required Quantilation Limit
To calculate sample quantitatton limits: (CRDL * Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page_19 of_28
Case * 30647
Site:
Lab.:
SOG: MC0128
VALMONT TCE
LIBRTY
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%So)ids :
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE
CRDL
40
12
2
401
1
1000
2
10
5
20
0.6
1000
3
0.1
8
1000
1
2
1000
2
10
4
0.5
MC0134
SB-G200-0206
Soil
mg/Kg
06/27/2002
14:25
85.8
1.0
Result
11200
4.3
[28.8]
[0.35]
[0.29]
[274]
16.8
[2.1]
20.0
21100
11.2
[616]
57.4
[0.094]
[6.2]
[679]
[0.71]
. [40.3]
24.0
21.3. [0.092]
Flap
UL
B
J
B
JB
MC0135
SB-G200-0608
Soil
mg/Kg
06/27/2002
14:30
88.3
1.0
Result
12300
6.6
[26.4]
- [0.24]
[0.30]
[97.3]
17.2
[2.5]
21.2
22200
10.0
1210
59.6
[0.097]
[7.4]
[647]
[0.74]
[56.0]
'25.1
25.1
Flag
UL
B
J
B
J
MC0136
SS-H300-0002
Soil
mg/Kg
06/27/2002
14:50
89.4
1.0
Result
11300
3.9
[21.2]
[0.21]
[0.21]
[235]
13.4
[1.3]
16.6
16000
10.5
[340]
42.7
[0.067]
[3.6]
[605]
[0.66]
[40.2]
21.9
14.1
Flag
UL
B
B
J
B
B
J
MC0137
SB-H300-0206
Soil
mg/Kg
06/27/2002
14:55
88.1
1.0
Result
10800
5.0
[20.8]
[0.31]
[0.26]
[175]
j 19.4
[0.84]
18.5
18900
13.6
[239]
3145
[0.078]
[3.3]
[647]
[0.73]
[48.2]
22.4
17.0
[0.0581
Flag
UL
B
J
B
B
J
B
MC0138
SS-17
Soil
mg/Kg
06/27/2002
08:15
98.3
1.0
Result .
4670
2.9
121.11
10.22]
[0.41]
962
12.5
[7.0]
17.6
12600
19.6
1040
284
[0.059]
9.2
[546]
[0.62]
•[221]
11.0
48.0
[0.12]
Flag
UL
J
B
J
B
CRDL = Contract Required Quantitation Limit
• To calculate sample quantitation limits: (CRDL * Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page _20 of _28_
Case fc 30647Site:
Lab.:
SDG : MC0128
VALMONTTCE
LIBRTY
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%Solids :
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON .
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER •
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE
CRDL
40
12
2
40
1
1
1000
2
10
5
20
0.6
1000
3
0.1
8
1000
1
2
1000
2
10
4
0.5
MC0139
SB-1 7-0206
Soil
mg/Kg
06/27/2002
09:35
79.2
1.0
Result
9560
3.0
[29.8}
[0.21]
[0.20]
[213]
10.0
[4.4]
11.7
11600
13.0
[676]
167
[0.087]
15.1][4941
[0.70]
[86.4]
18.0
24.6[0.096]
Flap
UL
B '
B
J
B
B
JB
Result Flao, Result Rafl Result
/
Flaq Result Flag
CRDL = Contract Required Quantitation Limit
To calculate sample quantitation limits: (CRDL * Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page _21 of _28
Case #: 30647Site:
Lab.:
SDG: MC0143
VALMONTTCE
LIBRTY
Number of Soil Samples : 20
Number of Water Samples : 0
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%SolkJs :
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE
CRDL
40
12
2
401
1
1000
2
10
5
20
0.6
1000
3
0.1
8
1000
1 ,
2
1000
2
10
4
0.5
MCQ143
SS-F535
Soil
mg/Kg
06/28/2002
08:15
73.5
1.0
Result
8420
[0.91J
6.4
63.0
[0.40]
[0.94]
[1070]
13.8
[5.0]
33.7
17900
111
[1030]
461
[0.058]
13.3
[626]
[1.0]
[0.14]
[324]
25.0
147
[0.42]
Flafl
L
B
J
J
B
J
B
MC0144
SB-F535-0206
Soil
mg/Kg
06/28/2002
08:20
84.4
1.0
Result
9440
[0.52]
3.1
[15.9]
[0.16]
[409]
12.9
[0.74]
13.7
17000
8.6
[320]
40.6 '
[2.7]
[494]
[1.0]
[54.4]
21.7
13.1
[0.10]
Flafl
L
B
J
B
J
B
J
B
MC0145
SB-F535-0810
Soil
mg/Kg
06/28/2002 •
08:25
88.5
1.0
Result
9590
2.9
[15.6]
[0.18]
[233]
13.2
[0.53]
12.6
17300
10.3
[172]
15.9
[1.8]
[606]
[0.78]
[55.5]
19.3
8.1
[0.061]
Flafl
UL
B
J
B
J
B
J
B
MC0146
SS-D535
Soil
mg/Kg
06/28/2002
08:40
89.6
1.0
Result
6040
[0.69]
3.8
47.7
[0.36]
[0.40]
1470
9.3
[5.1]
20.0
14400
39.4
[1010]
305
10.3
[571]
[1.0]
[173] '
16.6
68.7
[0.14]
Flap
L
J
J
B!
J
B
MC0147
SB-D535-0206
Soil
mg/Kg
06/28/2002
08:45
87.1
1.0
Result
24200
7.3
[28.71
[0.301
[0.19]
[327]
26.6
[1.3]
25.6
30900
13.1
[465)
48.8
[0.078]
[5.4]
[709]
[0.77]
[58.3]
44.4
18.8
[0.065]
Flag
UL
*
B
J
J
B
J
B
CRDL = Contract Required Quantitation Limit
To calculate sample quantitation limits: (CRDL * Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page_22 of_28
Case fc 30647
Site:
Lab.:
SDG : MC0143
VALMONT TCE
LIBRTY-
Sample Number :
Sampling Location :
ReWQC:
Matrix:
Units:
Date Sampled :
Time Sampled : '
%Solids:
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE
CRDL
40
12
2
401
1
1000
2
10
5
20
0.6
1000
3
0.1
8.
10001
2
1000
2
10
4
0.5
MC0148
SB-D535-0810
Soil
mg/Kg
06/28/2002
08:50
85.0 •
1.0
Result
16500
[0.56]
5.6
[19.5J
[0.20]
[0.14]
[267]
20.0
[0.68]
17.5
21400
11.1
[241]
20.4
[0.049]
[2.9]
[597]
[0.84]
[50.2]
31.5
11.4
[0.042]
Flacj
L
B
J
B
J
B
J
B
MC0149
SS-B540
Soil
mg/Kg
06/28/2002
09:10
87.3
1.0
Result
2380
[0.57]
[0.93]
[10.3]
[0.063]
[1100]
2.8
[0.45]
[4.3]
4130
8.5
[170]
47.1
[1.3]
[200]
[0.66]
[58.6]
[6.7]
12.0(0.058]
Flacj
L
J
B
J
B
J
B
MC0150
SB-B540-0206
Soil
mg/Kg
06/26/2002
09:15
94.9
1.0
Result
5790
[0.58J
2.3
[15.5]
[0.18]
[207]
7.5
[0.61]
7.0
11300
11.3
[196]
21.2
[2.0]
[522]
[0.67]
[38.8]
11.7
9.0
Flag
L
B
J
B
J
B
J
UL
MC0151
SB-B540-0608
Soil
mg/Kg
06/28/2002
09:20
89.0
1.0
Result
6820
2,4
117.3]
[0.16]
[204]
8.5
[1.3]
8.8
10600
10.6
[302]
41.7
[2.9]
[592]
[0.62]
[40.2]
12.7
8.8
Flag
UL
B
J
B
J
B1
J
UL
MC0152
SS-A540
Soil
mg/Kg
06/28/2002
09:30
87.5
1.0
Result
9630
4.2
125.7]
[0.22]
[0.12]
[490]
11.0
[3.6]
13.3
16600
15.8
[696]
216
[4.7]
[561]
1.6
[80.6]
21.1
26.7
[0.071]
Flag
UL
B
B
J
B
J
B
J
B
CRDL = Contract Required Quantitation Limit
To calculate sample quantitation limits: (CRDL' Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page_23 ot_28
Case #: 30647Site:
Lab.:
SDG: MC0143
VALMONTTCE
LIBRTY
Sample Number ;
Sampling Location :
FeW QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%Solids :
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINCCYANIDE
CRDL
40.
12
2
401
1
1000
2
10
5
20
0.6
1000
3
0.1
8
1000
1
2
1000
2
10
4
0.5
MC0154
SB-A540-0607
Soil
mg/Kg
06/28/2002
09:45
90.2
1.0Result
4610
[1.7]
[16.5]
[0.18]
[201]
5.9[1.6]
6.99090
9.1[166]
36.0
[1.4]
[680]
[0.47]
[39.7]
[9.8]
7.4
Flaq
UL
B
J
B
J
B
JUL
MC0155
SS-A200
Soilmg/Kg
06/28/2002
10:05
83.2
1.0Result
8430
2.951.7
[0.42]
[0.19]
1870
9.7[3.0]
11.6
13300
24.1
1350
496
[6.5]
[508]
[0.86]
[119]
17.9
44.2
(0.20]
Flafl
UL
J
J
B
JB
MC0156
SB-A200-0206
Soil
mg/Kg
06/28/2002
10:10
85.0
1.0Result
13800
4.6
[25.3]
[0.40]
[0.10]
[285]
17.8
[0.82]
16.2
21000
13.0
[304]
25.0
[0.068]
[3.6]
[606]
[46.8]
27.1
12.0
[0.0431
Flaq
UL
B
J
B
UL
B
JB
MC0157
SB-A200-0608
Soil
mg/Kg
06/28/2002
10:15
87.4
1.0Result
9510
3.6
[23.8]
[0.39]
[176]
10.5
[4.0]
14.1
20000
17.1
[159]
135
[1.8]
[532]
[0.74]
19.4
12.5
[0.063]
Flag
UL
B
J
B
J
JB
MC0158
SS-A400
Soil
mg/Kg
06/28/2002
10:40
85.2
1.0Result
5240
[0.69]
3.1
[33.0]
[0.29]
. 10.22]
2070
7.5[3.7]
13.5
12200
24.8
[725]
213
[6.8]
[528]
[162]
[11.2]
62.1
[0.12]
Flag
L
J
UL
B
J
BCRDL = Contract Required Quantitation Limit
To calculate sample quantitation limits: (CRDL * Dilution Factor) / (%Solids/ 100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page _24 of _28
Case #: 30647
Site:
Lab.:
SDG : MC0143
VALMONT TCE
LIBRTY
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
VSolids:
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE
CRDL
40122
401
11000
2105
200.6
1000
30.1
8
1000
1 '
2.1000
2104
0.5
MC0159
SB-A400-0206
Soil
mg/Kg
06/28/2002
10:45
90.8
1.0Result
6760
3.5I21.7J
[0.18]
[651]
7.7[2.3]
10.8
10400
9.7[908]
63.3
[5.4]
[563]
[66.1]
11.3
16.2[0.044]
Flap
UL
B
J
UL
B
JB
MC0160
SB-A400-0608
Soil
mg/Kg
06/28/2002
10:50
94.3
1.0Result
3850
[0.47]
2.5
[14.6]
[0.24]
[199]
4.4[5.3]
5.26740
13.2
[207]
75.8
[1.8]
[604]
[0.45]
[46.3]
[7.4]
7.0[0.043]
Flap
L
B
J
B
J
B
JB
MC0161
SS-D200-0002
Soil
mg/Kg
06/28/2002
11:10
85.6
1.0Result
9230
[0.63]
3.0[24.31
[0.13]
[719]
11.3
[1.1]
13.6
15800
10.3
[722]
77.5
[3.2]
[486]
[0.71]
[76.9]
21.8
16.1
[0.037]
Flat)
L
B
J
B
J
B
JB
MC0162
SB-D200-0206
Soil
mg/Kg
06/28/2002
11:15
89.0
1.0Result
7430
2.6
[24.01
[0.28]
[520]
10.8
[1.1]
13.3
16100
10.9
[355]
40.0
[3.2]
[5951
[0.95]
[60.2]
18.6
10.9
[0.054]
Flap
UL
B
J
B
J
B
J
B
MC0163
SB-D200-1012
Soil
mg/Kg
06/28/2002
11:20
87.3
1.0
Result
4130
(0.59]
10.77]
(13.7]
[0.31]
[188]
5.7[6.1J
8.716000
10.8
[76.11
24.5
[1.4]
(453J
[0.89]
161.2]
[10.0]
11.8
[0.046]
Flag
B
B
B
J
B
J
B
J
B
CRDL = Contract Required Quantitation Limit
. To calculate sample quantitation limits: (CRDL * Dilution Factor) / (%SolkJs/ 100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page_25 of_28
Case* 30647
Site:
Lab.:
SDG : MC0153
VALMONTTCE
LIBRTY'
Number of Soil Samples: 20Number of Water Samples : 0
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units :
Date Sampled :
Time Sampled :
%Solids:
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINCCYANIDE
CRDL
40122
4011
10002
10
5200.6
10003
0.18
100012
10002
104
0.5
MC0.153
SB-A540-0206
Soilmg/Kg
06/28/2002
09:40
86.8
1.0 .Result
11300
3.8(24.2]
[0.18]
[253]- 12.1
[2.0]6.2
14300
8.1[982]
92.0
[5.4][479]
[67.6]
19.8
23.9
Flafl
UL
B '
BJ
BJ
UL
BUL
UL
MC0164SS-I200-0002
Soil
mg/Kg
06/28/2002
11:3590.4
1.0Result
8810
4.3[28.9]
[0.31]
2440
11.4[3.5]
9.916900
8.61150233
- [7-9][394]
[68.0]
15.923.4
[0.053]
Flafl
UL
B
JJ
JUL
BUL
B
MC0165
SB-1 200-0206
Soil
mg/Kg
06/28/2002
11:4085.4
1.0Result
10400
3.4
[27.8]
[0.29]
160016.5[1.5]
14.520800
12.0[389]
57.0
[4.4][488]
[61.1]
23.118.4
[0.048]
Flafl
UL
B
J
J
BJ
UL
BUL
B
MC0166
SS-C350-0002
Field Dup. of
MC0181
Soil
mg/Kg
06/28/2002
12:1590.0
1.0Result
5060
[1.9]
114.81
[0.13]
[192]6.2[1.2]
[3.8]8440
5.5
[361]
47.9
[2.2]
[244]
[90.3]
12.3
7.8
[0.0471
Flafl
UL
B
BJ
BJ
UL
BUL
LB
MC0167
SB-C350-0206
Field Dup. of
MC0182
Soil
mg/Kg
06/28/2002
12:2088.7
1.0Result ,
11800
3.6
[34.5]
10.26]
(410)14.4
[1.3]7.3
1560012.4[422]39.4
[3.5][388]
[54.1]
22.3
10.6[0.099]
Flag
UL
B
BJ
BJ
UL
BUL
BCRDL = Contract Required Quantitation Limit
To calculate sample quantitation limits: (CRDL * Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Paoe 26 of 2fl_
Case #: 30647Site:
Lab.:
SDG : MC0153VALMONT TCELIBRTY
Sample Number :Sampling Location :
Field QC:
Matrix:Units:Date Sampled :Time Sampled :%Solids :Dilution Factor :
ANALYTEALUMINUMANTIMONY
ARSENICBARIUMBERYLLIUM
CADMIUMCALCIUMCHROMIUMCOBALT
COPPERIRON
•LEADMAGNESIUMMANGANESEMERCURY
NICKELPOTASSIUMSELENIUMSILVERSODIUMTHALLIUMVANADIUM
ZINCCYANIDE
CRDL
40122
4011
10002
105
200.6
1000
30.1
81000
12
10002
104
0.5
MC0168SB-C350-0911
Soilmg/Kg
06/28/200212:3084.9
1.0Result
17600
5.8120.0][0.32],
1512)18.2
[1.2]16.8
2340012.0[345]
38.7[0.074]
13.1][370]
30.712.4
[0.085]
Flaq
UL
B
BJ
BJ
UL
UL
B
MC0169SS-D350-0002
Soilmg/Kg06/28/2002
12:5091.3
1.0Result
7730[0.42]
3.2124.7][0.24]
164010.1[7.1]7.1
133009.8
[530]
146
[3.5][403]
[85.5]
16.0
11.610.17]
Flafl
L
B
JJ
BJ
UL
BUL
B
MC0170
SB-D350-0206
Soilmg/Kg
06/28/2002
13:0087.4
1.0Result
11100[0.39]
3.6[26.1][0.25]
[778]13.7
[1.8]
8.017700
8.2[646]62.1
[4.0][364]
>
196.0]
22.613.1
[0.14]
FlagKL
B
BJ
BJ
UL
BUL
B
MC0171SB-D350-1012
Soilmg/Kg06/28/2002
13:1087.61.0
Result7150
2.4
[13.4][0.19]
[585]
9.1[0.52]
8.212600
7.5[186]
19.9
[1.71[247]
[133J
15.3
5.8[0.047]
FlacjKUL
B
BJ
BJ
UL
BUL
LB
MC0172SS-E350-0002
SoUmg/Kg
06/28/200213:4089.7
1.0
Result5340
2.6115.01[0.18]
[807]9.9[2.4][4.9]
118006.6
[383]
105
[2.7][285]
[80.8]
12.012.0
[0.080]
FlaflK
UL
B
BJ
BJ
UL
BUL
BCRDL = Contract Required Quantitation LimitTo calculate sample quantitation limits: (CRDL * Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page_27 of_28_
Case ft 30647
Site:
Lab.:
SDG: MC0153
VALMONTTCE
LIBRTY
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%Solids:
Dilution Factor :
ANALYTE 'ALUMINUM
ANTIMONY
ARSENIC
BARIUMBERYLLIUM
CADMIUM
CALCIUM
CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKELPOTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE
CRDL
40
12
2
40
1
1
1000
2
10
5
20
0.6
1000
3
0.1
8
1000
1
2
1000
2
10
4
0.5
MC0173SB-E350-0206
Soilmg/Kg
06/28/2002
13:45
86.6
1.0
Result
12900
4.0
134.3)
10.23]
[468]
16.0
[2.0]
10.0
19400
9.8[869]
53.4
[5-0]
[443]
[66.3]
26.6
18.9[0.081]
Flafl
K
UL
B '
BJ
BJ
UL
B
UL
B
MC0174
SB-E350-0709
Soil
mg/Kg
06/28/2002
13:50
85.5
1.0Result
9960
3.2[30.3]
[0.32]
3390
20.5
[2.0]
11.9
22700
11.5
[592]
85.6
[0.047]
[4.1]
[504]
[87.8]
22.8
15.5[0.046]
FlapK )UL
B
J
J
BJ
UL
BUL
B
MC0175SS-F350-0002
Soil
mg/Kg
06/28/2002
14:10
89.9
1.0Result
7590
3.2[23.2]
[0.21]
1340
9.5[3.2]
6.712700
7.9[721]
124
14-2][404]
R6.2]
15.4
13.7
[0.036]
Flafl
KUL
B
JJ
BJ
UL
BUL
B
MC0176
SB-F350-0206
Soil
mg/Kg
06/28/2002
14:15
86.0
1.0Result
9020
3.4[26.0][0.27]
[754]
13.9
[1.7]
9.517600
9.4
[515]
62.4
[3.9]
[382]
[86.4]
21.6
13.7
[0.0561
FlaflK
U.
B
B
J
B
J
UL
B
UL
B
MC0177
SB-F350-1012
Soilmg/Kg
06/28/2002
14:20
86.5
1.0
Result
6870
[0.42]
4.3
(22.6]
[0.35]
[280]
12.2
[9.5]
16.3
21000
13.1
[112]
242
[3.2]
[468]
[65.5]
[0.76]
18.0
9.8
10.052]
Flat)
K
.
B
B
J
B
B
J
UL
B
B
B
CRDL = Contract Required Quantitation Limit
To calculate sample quantitation limits: (CRDL • Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
DATA SUMMARY FORM: INORGANIC Page_28 of_28
Case ft 30647
Site:
Lab.:
SDG: MC0153
VALMONTTCE
LIBRTY
Sample Number :
Sampling Location :
Field QC:
Matrix:
Units:
Date Sampled :
Time Sampled :
%Solids:
Dilution Factor :
ANALYTE
ALUMINUM
ANTIMONY
ARSENIC
BARIUM
BERYLLIUM
CADMIUM
CALCIUM
, CHROMIUM
COBALT
COPPER
IRON
•LEAD
MAGNESIUM
MANGANESE
MERCURY
NICKEL
POTASSIUM
SELENIUM
SILVER
SODIUM
THALLIUM
VANADIUM
ZINC
CYANIDE
CRDL
40122
4011
1000
210
520
0.61000
30.1
81000
12
1000
2104
0.5
MC0178
SS-G350-0002
Soil
mg/Kg
06/28/2002
14:45
92.7
1.0Result
9910
3.8
.[25.7][0.27]
1170
12.5
J3.3]
9.216400
12.5
[664]
88.6
[4.5]
[436]
[117]
20.2
50.1
[0.0901
Flag
K
UL
B '
J
J
eJUL
BUL
B
MC0179
SB-G350-0206
Soil
mg/Kg
06/28/2002
14:55
85.0
1.0Result
10600
3.7
[27.7]
[0.31]
[626]
14.5
[1.2]
10.7
18300
10.5
[405]
32.4
[3.4]
[541]
'
[141]
22.4
13.4
[0.0761
Flap
K
UL
B
BJ
BJ
UL
BUL
B
MC0180
SB-G3SO-0911
Soil
mg/Kg
06^28/2002
15:00
85.9
1.0Result
9290
[O.SO]
8.392.3
[0.54]
[166]
15.4
42.4
20.0
33800
93.5
[128]
1180
[0.061]
[2.3]
(365]
1.4
[50.5]
[1.8]
18.4
39.3
[0.099]
Flag
K
L
B
B
J
BJL
BB
B
MC0181
SS-DUP-05
Field Oup. of
MC0166
Soil
mg/Kg
06/28/2002
12:00
85.8
1.0Result
6650
[1.8]
[14.7]
{0.17]
[162]
11.8
[1.1]
[2.9]
14000
8.4[306]
53.4
[0.063]
12.1][217]
[84.5]
14.8
12.5
[0.10]
Flat}
K
UL
B
BJ
B
BJ
UL
BUL
B
MC0182
SB-DUP-05
Field Dup. of
MC0167
Soil
mg/Kg
06/28/2002
12:05
82.9
1.0Result
18000
5.2
[20.0]
[0.27]
{511]
16.8
[1.3]
15.0
21600
12.1
[287]
41.7
[0.079]
[3.0]
[376]
[59.2]
29.8
11.6
[0.11]
FlaflK
UL
B
B
J
BJUL
BUL
BCRDL = Contract Required Quantitation Limit
To calculate sample quantitatton limits: (CRDL * Dilution Factor) / (%Solids/100)
SEE NARRATIVE FOR CODE DEFINITIONS
Revised 09/99
APPENDIX C
Chain of Custody (COC) Records
AEPA USEPA Contract Laboratory ProgramInorganic Traffic Report & Chain of Custody Record
Date Shipped: 6/25/02
Carrier Name: FedEx
Airbill: 828684709982
Shipped to: Liberty Analytical501 Madison AvenueGary NC 2751 3(919)379-4080
Chain of Custody RecordRelinquished By (Date / Time)
13i_ycL4; 6/15/02. \T.oe>
2
3
4
Sampler < — -^ » i< .,-Signature: LJLpsA v^— -«^^Received By \ T (Date / Time)
^WlMUwiij! frlb'0£W
\J
Case No: 3ut>4/DAS No: 1SDS"°: MOnrm LFor Lab Use Only -vj-Lab Contract No: (tf& AQOCRSh
Unit Price: ^~]°\ &1
Transfer To:
Lab Contract No:
Unit Price:
INORGANICSAMPLE No.
M(JUU02^
>tO I ' .'** - v -~fv -M60G05
MC0012
MC0014 '
MC0015 '
MC0017
MC0018
MC0020 '
MC0021 '
MATRIX/SAMPLER
Subsurface Soil(>12"XDaniel HartiganSubsurface Soil
Daniel HartiganSubsurface Soil
Daniel HartiganSubsurface Soil
Daniel HartiganSurface Soil
Daniel HartiganSubsurface Soil
Daniel HartiganSubsurface Soil
Daniel HartiganSubsurface Soil
Daniel 'HartiganSurface Soil
CONG/TYPE
L/G
L/G
L/G
L/G
L/G
L/G
L/G
L/G
ANALYSIS/ TAG No./TURNAROUND PRESERVATIVE
FM/CN (21) 3-107 (Not pre
TM/CN(21)
TM/CN(21)
TM/CN(21) H& ,
TM/CN(21) bl£\<>1
TM/CN(21)
TM/CN(21)
served) (1)
f3-120(1)
3-148(1)
3-156(1)
3-160(1)
3-168(1)
3-172(1)
iTM/CN (21) 3-187 (Not preserved),
3-1 88 (Not preserved) (2)
TM/CN (21) ^3-192(1)
STATIONLOCATION
SB-AOO-0406
SB-DOO-0602-
SB-J1 00-0205
SB-J200-0204
SS-J250-0002
SB-J250-0709
SB-DtiP-01
SB-GOO-0206
SS-J300-0002
SAMPLE COLLECTDATE/TIME
3:
S:
S:
S:
S:
S:
S:
S:
S:
6/24/02
6/24/02
6/24/02
6/24/02
6/24/02
6/24/02 .
6/24/02
6/24/02
6/24/02
9:25
0C&fJjx0§^
11:25
11:50
12:15
12:25
12:30
10:45
13:05
ORGANIC FOR LAB USE ONLYSAMPLE No. Sample Condition On Receipt
-Z^nb^ttoO*"^Pc- /v\ 0.0004 ncn* t£«uo^
C0012 , G~O~6O
C0014 , /
. y>VlC0015 "A*1^ I
CO0 17
C0018
C0020
C0021
Daniel Hartigan ORIGINALShipment for CaseComplete^N
Analysis Key:
TM/CN = CLP TAL Total
Sample(s) to be used for laboratory QC:
MC0020
Additional Sampler Signature(s): Cooler TemperatureUpon ReceiptjpC/
MConcentration: L = Low, M = Low/Medium, H = High Type/Designate:Composite = C, Grab = G
Chain of Custody Seal Number:
Custody Seal lntact?V
Metals and Cyanide '
Shipment Iced V
/
TFTNumber: 3-424838327-062502-0001 0 |\PC1P ATftl*elifflinary results. Requests for oreliminary results will increase analytical costs. H*i4- -ft H-n« % J> rt \ i- 'V fc \,*'<rCbfitract Laboratory Analytical Services Support, 2000 Edmund Halley Dr., Reston, VA. 20191-3436 Phone 703/264-9348 Fax 703/264-922 F2V5.0.66 Page 1 of 3
V>EPA USEPA Con tract Laboratory ProgramInorganic Traffic Report & Chain of Custody Record
Date Shipped: 6/25/02
Carrier Name: FedEx
Airbill: 828684709982
Shipped to: Liberty Analytical501 Madison AvenueGary NC 2751 3(919)379-4080
Chain of Custody RecordRelinquished By (Date / Time)
1 r^>__^\-L-^ sfeloT- \r-e>6
2
3
4
Sampler — 1\ . \ i v -_Signature: y \H_s^~Retseived By
( xjpOWJL
I
\ (Date / Time)
tU|k iattfVityU
"
Case No: 30647
DAS No: 1
SDGNo: VACQOOSl L-
For Lab Use Only LOLab Contract No: 1 0^ V^O^OC^&;
j. _y\ p_ --) ^ *JUnit Price: ^> HiO /
Transfer To:
Lab Contract No:
Unit Price:
INORGANICSAMPLE No.
MC0022 f
MC0023 '
MC0024 '
MC0025 '
MC0027 /
MC0028 /
MC0029 '
MC0030
MC0031 '
MATRIX/SAMPLER
Subsurface Soil(>12")/Daniel HartiganSurface Soil
Daniel HartiganSurface Soil
Daniel HartiganSurface Soil(0--1211)/Daniel HartiganSurface Soil(0"-12"XDaniel HartiganSurface Soil
Daniel HartiganSubsurface Soil
Daniel HartiganSurface Soil(0"-12"XDaniel HartiganSurface Soil
Daniel Hartigan
CONC/TYPE
L/G
L/G
L/G
L/G
L/G
L/G
L/G
L/G
ANALYSIS/ TAG No./TURNAROUND PRESERVATIVE
TM/CN (21)
TM/CN(21)
TM/CN(21)
TM/CN-(21)
TM/CN(21) ^ Jb
TM/CN(21) o6/«^ot
TM/CN(21)
N TM/CN(21)
TM/CN(21)
' 3-196 (1)
3-200(1)
3-204(1)
3-208(1)
3-214(1)
3-218(1)
3-222(1)
3-226(1)
3-230(1)
ORIGINAL
STATIONLOCATION
SB-J300-0203
SS-J400-0002
SB-J400-0205
SS-J450-0002
SS-I500-0002
SS-H525-0002
SB-H525-0205
SS-G500-0002
SS-DUP-01
SAMPLE COLLECTDATE/TIME
S: 6/24/02
S: 6/24/02
S: 6/24/02
S: 6/24/02
S: 6/24/02
S: 6/24/02
S: 6/24/02
S: 6/24/02
S: 6/24/02
13:10
13:25
13:30
13:45
14:10
14:30
14:40
15:15
15:20
ORGANIC FOR LAB USE ONLYSAMPLE No. Sam pie Condition On Receipt
UUU22 /jj
C0023
C0024
C0025
C0027
C0028
C0029
C0030
C0031
ood
Shipment for CaseComplete?N
Analysis Key:
TM/CN = CLP TAL Total
Sample(s) to be used for laboratory QC:
MC0020
Additional Sampler Signature(s): Cooler TemperUpon Receipt:n.
Concentration: L = Low, M = Low/Medium, H = High Type/Designate:Composite = C, Grab = G
Metals and Cyanide
ature
*S
Chain of Custody Seal Number:
v/ \/Custody Seal lntact?> 1 Shipment Iced Y
I
FR Number: 3-424838327-062502-0001 | A o $ > p 4 y:f> p y f\1 results. Requests for preliminary results will increase analytical costs. i^r^fiwf' ^ 8%%>^"*>. n W % 'K & ^Laboratory Analytical Services Support, 2000 Edmund Halley Dr., Reston, VA. 20191-3436 Phone 703/264-9348 Fax 703/264-922 F2V5.0.66 Page 2 of 3
SEPA USEPA Contract Laboratory ProgramInorganic Traffic Report & Chain of Custody Record
Date Shipped: 6/25/02
Carrier Name: FedEx
Airbill: 828684709982
Shipped to: Liberty Analytical501 Madison AvenueGary NC 2751 3(919)379-4080
Chain of Custody RecordRelinquished By (Date / Time)
1£LAY\ -X 6/l5/oL '00
2
3
4
Sampler —rs. vvl \ •Signature' •!••* -SM ^ \
/R§Ce|ved By [) (Date / Time)
/teftM\(lulli9 tofa'Crts~ I W>
Case No: 30647
DAS No: 1SDGNo: MCjoo^MCjooesL.For Lab Use Only ' COLab Contract No: VO^ xfoOCfeS £",
Unit Price: ^~lHt5~?
Transfer To:
Lab Contract No:
Unit Price:
INORGANICSAMPLE No.
MC0032 /
MC0033 ^
MC0035 y
MATRIX/ CONC/SAMPLER TYPE
Subsurface Soil L/G(>12")/Daniel HartiganSubsurface Soil L/G
Daniel HartiganField QC/ L/G
ANALYSIS/ TAG No./ STATION SAMPLE COLLECTTURNAROUND PRESERVATIVE LOCATION DATE/TIME
TM/CN (21)
^^Lv*f^^TTM/CN (21) ^(^
TM/CN (21) 3-243
{3-234 (1) bb-G500-0206 S: b/24/02 15:25
3-238(1) SB-G500-0911 S: 6/24/02 15:30
(HNO3), 3-244 FB-01 S: 6/24/02 12:45
ORGANIC FOR LAB USE ONLYSAMPLE No. Sample Condition On Receipt
C0032 C\s* " I
00033 SO^P^C0035
SoouOQV^=>~v
Daniel Hartigan (NaOH) (2)
ORIGINAL
Shipment for CaseCOmplete?N
Analysis Key:
TM/CN = CLP TAL Total
Sample(s) to be used for laboratory QC:
MC0020
Additional Sampler Signature(s): Cooler Temperature Upon Receipt- /rt^
l»(Concentration: L = Low, M = Low/Medium, H = High Type/Designate:Composite = C, Grab = G
'Chain of Custody Seal Number:
Custody Seal IntactW I Shipment Iced V
Metals and Cyanide '
FR Number: 3-424838327-062502-0(101rfeiiffiinary results. Requests for preliminary results will increase analytical5: Contract Laboratory Analytical Services Support, 2000 Edmund Halley Dr.,
costs. Erodr . Saff T*iJr H -jtr"?Reston, VA. 20191-3436 Phone 703/264-9348 Fax 703/264-922
TORY COPYF2V5.0.66 Page 3 of 3
c^fcPA USEPA Contract Laboratory ProgramInorganic Traffic Report & Chain of Custody Record
Region: 3 Date shipped:.Project Code: Carrier Name:Account Code: A|rb|1|.
CERCLISIO: Shipped to:Spill ID:
Site Name/State: Valmont TCE 6724/02/PAProject Leader: Neil TeamersonAction: Combined RI/FSSampling Co: Tetra Tech NUS, Inc.
e/28/02 Chain of CustodyFHF* ,ft7BRfl47101S1 Relinquished By
Liberty Analytical 1 //£/^~ &
Gary NC 2751 3 2
3
4
Case No: 30647 Q
DAS No: |X
Record *""'••' / <S&—Signature: *-TS/ ^*T
(Date /Time) Received By (Date /Time)
'2&"02. /<&§
INORGANIC MATRIX/ CONG/ ANALYSIS/ TAO No./ STATION SAMPLE COLLECT ORGANIC QCSAMPLE No. SAMPLER TYPE TURNAROUND PRESERVATIVE LOCATION DATE/TIME SAMPLE No. Type
MCOOP9 Surface Soil L/G TM/CN(21) 3-388(1) SS-B350 S: 6/26/02 10:30 C0069
Eric HlnkleMC0070 Subsurface Soil L/G TM/CN(21) 3-392(1) SB-B350-0206 S: 6/26/02 10:35 C0070
Eric HinkleMC0071 Subsurface Soil L/G TM/CN(21) 3-396 (Not preserved) (1) SB-B350-0607 S: 6/26/02 10:40 C0071
Eric HlnkleMC0072 Surface Soil L/G TM/CN(21) 3-400(1) SS-B325 S: 6/26/02 10:50 C0072
Eric HinkleMC0073 Subsurface Soil L/G TM/CN(21) 3^»03 (Not preserved), SB-B325-0206 S: 6/26/02 10:55 C0073
(>1 2")/ 3-523 (Not preserved) (2)Eric Hinkie
MC0074 Surface Soil L/G TM/CN(21) 3-408(1) SS-B100 S: 6/26/02 11:15 C0074
Eric HinkleMC0075 Subsurface Soil L/G TM/CN(21) 3-412(1) SB-B1 00-0206 S: 6/26/02 11:20 C0075
Eric HinkleMC0076 Subsurface Soil L/G TM/CN(21) 3-416(1) SB-DUP-03 S: 6/26/02 11:23 C0076 Field Duplicate of C0075
Eric HinkleMC0077 Subsurface Soil L/G TM/CN(21) 3-420(1) SB-B100-0608 S: 6/26/02 11:25 C0077
Eric HinkleMC0078 Surface Soil L/G TM/CN(21) 3-423 (Not preserved), SS-D300-0002 S: 6/26/02 11:50 C0078 , - ,
(0"-12")/ 3-51 5 (Not preserved) (2) ,'' .Eric Hinkle
Shipment for Case Sample(s) to be used for laboratory QC:Complete? N
MC0073,MC0078,MC0131
Analysis Key: Concentration: L « Low, M = Low/Medium, H =• High
Additional Sampler Signature(s):
Type/Designate: Composite » C, Grab = G
TM/CN = CLP TAL Total Metals and Cyanide
Chain of Custody Seal Number:
f —
Shipment lead?
TR Number 3-424838327-062802-0001PR provides preliminary results. Requests for preliminary results will increase analytical costs. -„,„.„-„ .. ..S^ Copy to: Contr»ct Laboratory Analytical Services Support, 2000 Edmund Haltey Dr., Reston, VA. 20191-3436 Phone 703/264-9348 Fax 703/264-9222 F2V5.0.66 Page 1 Of 8
t n'> '!••• L^^v /? «.
?5ii **V SUM i^^jW ****&
Region:
Project Code:
Account Code:
CERCLIS ID:
Spill ID:
Site Nama/State
Project Leader:
Action:
Sampling Co:
INORGANICSAMPLE No.
. MC0079
MC0080
MC0081
MC0082
MC0083
MC0084
MC0085
MC0086
MC0087
MC0088
USEPA Contract Laboratory Program case NO:Inorganic Traffic Report & Chain of Custody Record DAS NO.-
3
i
: Valmorrt TCE 6724/02/PA
Neil TeamersonCombined RI/FS
Tetra Tech NUS, Inc.
MATRIX/ CONG/ ANALYSIS/SAMPLER TYPE TURNAROUND
Subsurface Soil L/G TM/CN (21)(>iryEric HinkleSubsurface Soil L/G TM/CN (21)
Eric HinkleSurface Soil L/G TM/CN (21)
Eric HinkleSubsurface Soil L/G TM/CN (21)
Eric HinkleSubsurface Soil L/G TM/CN (21)
Eric HlnkieSurface Soil L/G TM/CN (21)
Eric HinkleSubsurface Soil L/G TM/CN (21)
Eric HinkleSubsurface Soil L/G TM/CN (21) ,
Eric HinkleSurface Soil L/G TM/CN (21)(0"-12")/Eric HinkleSubsurface Soil L/G TM/CN (21)
Data shipped: 6/28/02 Chain of Custody Record
Abwn. ft9ftRM7imsi Relinquished By (OatefTlm*
Shipped to: Liberty Analytical 1 ^^^^- £~20&2*/l501 Madison Avenue , . _ . . , — , fGary NC 2751 3 2
3
4
30647 O
Sampler ^^"^sfsZ/Signature: ^^//^£ —
) Received By (Date / Time)
TAG No./ STATION SAMPLE COLLECT ORGANIC QCPRESERVATIVE LOCATION DATE/TIME SAMPLE No. Type
3-428(1) SB-D300-0206 S: 6/26/02 11:55 C0079 - "
3-432(1) SB-D300-1012 S: 6/26/02 12:00 C0080
3-436(1) SS-E300-0002 S: 6/26/02 ' 12:20 C0081
3-440(1) SB-E300-0206 S: 6/26/02 12:25 C0082
3-444(1) SB-E300-1012 S: 6/26/02 12:30 C0083
3-448(1) SS-D225-0002 S: 6/26/02 13:10 C0084
3-452(1) SB-D225-0206 S: 6/26/02 13:15 C0085
3-456(1) SB-D225-1012 S: 6/26/02 13:20 C0086
3-460(1) SS-F400-0002 S: 6/26/02 l5'V.<? C0087 , )
y\ , 'T-3-464(1) SB-F400-0206 S: 6/26/02 13:45 C0088 ./ '
Eric Hinkle
Shipment tor CaseComplete? N
Analysis Key:
TM/CN = CLP TAL Tol
Sample(s) to be used for laboratory QC:
MC0073. MC0078, MC0131
Additional Sampler Signature(s):
Concentration: L =» Low, M = Low/Medium. H = High Type/Designate: Composite = C, Grab = G
Chain of Custody Seal Number
Shipment Iced? ,
tal Metals and Cyanide
TR Number: 3-424838327-062802-0001PR provides preliminary results. Requests for preliminary results will increase analytical costs.Send Copy to: Contract Laboratory Analytical Services Support, 2000 Edmund Halley Dr., Reston, VA. 20191-3436 Phone 703/264-9348 Fax 703/264-9222 F2V5.0.66 Page 2 of 8
4'itPA USEPA Contract Laboratory ProgramInorganic Traffic Report & Chain of Custody Record
Region: 3Project Code:
Account Code:
CERCLIS ID:
Spill ID:
Site Name/State: Valmont TCE 6724/02/PA
Project Leader: Neil TeamersonAction: Combined RI/FS
Sampling Co: Tetra Tech NUS, Inc.
INORGANIC MATRIX/ CONG/ ANALYSIS/SAMPLE No. SAMPLER TYPE TURNAROUND
MC0089 Subsurface Soil L/G TM/CN (21)
Eric HlnkleMC0090 Surface Soil L/G TM/CN (21)
Eric HlnkleMC0091 Subsurface Soil L/G TM/CN (21)
Eric HlnkleMC0092 Subsurface Soil L/G TM/CN (21)
Eric HinkleMC0093 Surface Soil L/G TM/CN (21)
Eric HlnkleMC0094 Subsurface Soil L/G TM/CN (21)
Eric HlnkfeMC0095 Subsurface Soil L/G TM/CN (21)
Eric HinkleMC0096 Surface Soil L/G TM/CN (21)
Eric HinkleMC0097 Subsurface Soil L/G TM/CN (21)
Eric HinkleMC0098 Subsurface Soil L/G TM/CN (21)
Date Shipped: 6/28/02
Carrier Name: FedEx
Airbill: 828684710151
Shipped to: Liberty Analytical501 Madison AvenueGary NC 2751 3-(919)379-4080
TAO No./ STATIONPRESERVATIVE LOCATION
Case No: 30647 ^
DAS No: |*X
Chain of Custody Record
Relinquished By
Sampler ^^">^^<>r>Sl8nahire: ^_X^^
(Date /Time) Received By (Date /Time)
^t£>f2£-- 6-&'*2- /<£t>2
3
4
SAMPLE COLLECTDATE/TIME
3-468(1) SB-F400-0608 S: 6/26/02
3-472(1) SS-E400-0002 S: 6/26/02
3-476(1) SB-E400-0206 S: 6/26/02
3-480(1) SB-E400-1011 S: 6/26/02
3-484(1) SS-D400-0002 S: 6/26/02
3-488(1) SB-D400-0206 S: 6/26/02
3-492(1) SB-D400-0810 S: 6/26/02
3-496(1) SS-C400-0002 S: 6/26/02
3-500(1) SB-C400-0206 S: 6/26/02
3-504(1) SB-C400-0607 S: 6/26/02
13:50
14:20
14:25
14:30
14:45
14:50
14:55
15:15
15:20
15:25
ORGANIC QCSAMPLE No. Type
C0089
C0090
C0091
C0092
C0093
C0094
C0095
C0096
C0097
C0098
Eric Hinkle
Shipment tor CaseComplete? N
Analysis Key:
TM/CN = CLP TALTol
Samples) to be used for laboratory QC:
MC0073.MC0078.MC0131
Additional Sampler Slgnature(s):
Concentration: L = Low, M = Low/Medium, H = High Type/Deslgnslte: composite = C, Grab = G
Chain of Custody Seal Number:
Shipment Iced?
al Metals and Cyanide
TR Number: 3-424838327-062802-0001PR provides preliminary results. Requests for preliminary results will increase analytical costs.Send Copy to: Contract Laboratory Analytical Services Support, 2000 Edmund Halley Dr., Reston, VA. 20191-3436 Phone 703/264-9348 Fax 703/264-9222 F2V5.0.66 Page 3 of 8
4>t".PA USEPA Contract Laboratory ProgramInorganic Traffic Report & Chain of Custody Record
Region: 3
Project Code:
Account Code:
CERCLIS ID:Spill ID:
Site Name/State: Valmont TCE 6724/02/PA
Project Leader: Neil TeamersonAction: Combined RI/FS
Sampling Co: Tetra Tech NUS, Inc.
INORGANIC MATRIX/ CONG/ ANALYSIS/SAMPLE No. SAMPLER TYPE TURNAROUND
MC0099 Surface Soil L/G TM/CN (21)
Eric HinkleMC0100 Subsurface Soil L/G TM/CN (21)
Eric HinkleMC0101 Surface Soil L/G TM/CN (21)
Eric HinkleMC0102 Surface Soil L/G TM/CN (21)
Eric HinkleMC0103 Subsurface Soil L/G TM/CN (21)
Eric HinkleMC0104 Subsurface Soil L/G TM/CN (21)
Eric HinkleMC0105 Surface Soil L/G TM/CN (21)
Eric HinkleMC0106 Subsurface Soil L/G TM/CN (21)
Eric HinkleMC0107 Subsurface Soil L/G TM/CN (21)
Eric HinkleMC0108 Surface Soil L/G TM/CN (21)
Date Shipped: 6/28/02
Carrier Name: FedEx
Airbill: 828684710151
Shipped to: Liberty Analytical501 Madison AvenueGary NC 2751 3(919)379-4080
TAG No./ STATIONPRESERVATIVE LOCATION
Case No: 30647DAS No: R
Chain of Custody Record ffmpler s^s/sZ/Signature: ^^ ^y ^£ ~ '
Relinquished By (Date / Time) Received By (Date / Time)
1 <£^&£- 6-28-cz /A»o2
3
4
SAMPLE COLLECT ORGANICDATE/TIME SAMPLE No.
QCType
3-508(1) SS-B450-0002 S: 6/26/02 15:35 C0099
3-512(1) SB-B450-0204 S: 6/26/02 15:40 C0100
3-519 (Not preserved) (1 ) SS-DUP-03 S: 6/26/02 15:15 C0101 Field Duplicate of C01 00
3-528 (Not preserved) (1) SS-D450-0002 S: 6/27/02 7:45 C0102
3-532 (Not preserved) (1) SB-D450-0206 S: 6/27/02 7:50 C0103
3-536 (Not preserved) (1 ) SS-D450-091 1 S: 6/27/02 7:55 C0104
3-540 (Not preserved) (1) SS-E450-0002 S: 6/27/02 8:15 C0105
3-544 (Not preserved) (1) SB-E450-0206 S: 6/27/02 8:20 C0106
3-548 (Not preserved) (1) SB-E450-0709 S: 6/27/02 8:25 C0107
3-552 (Not preserved) (1 ) SS-1350-0002 S: 6/27/02 8:40 C0108
Eric Hinkle
Shipment tor CaseComplete? N
Analysis Key:
TM/CN « CLP TAL Tol
Samp)e(s) to be used for laboratory QC:
MC0073, MC0078, MC0131
Additional Sampler Signature(s):
Concentration: L = Low, M = Low/Medium, H = High Type/Designate: Composite = C, Grab « G
Chain of Custody Seal Number:
Shipment Iced?
:al Metals and Cyanide
TR Number. 3-424838327-062802-0001PR provides preliminary results. Requests for preliminary results will Increase analytical costs.Sand Copy to: Contract Laboratory Analytical Services Support, 2000 Edmund Halley Dr., Reston, VA. 20191-3436 Phone 703/264-9348 Fax 703/264-9222 F2V6.0.66 Page 4 of 8
-a-EPARegion:
Project Code:
Account Code:
CERCLIS ID:Spill ID:
Site Name/StateProject Leader:
Action:
Sampling Co:
INORGANICSAMPLE No.
MC0109
MC0110
MC0111
MC0112
MC0113
MC0114
MC0115
MC0116
MC0117
MC0118
USEPA Contract Laboratory ProgramInorganic Traffic Report & Chain of Custody
3
: Valmont TCE 6724/02/PA
Neil TeamersonCombined RI/FS
Tetra Tech NUS, Inc.
MATRIX/ CONC/SAMPLER TYPE
Subsurface Soil L/G
Eric HinkleSubsurface Soil L/G
Eric HinkleSurface Soil L/G(0--12")/Eric HinkleSubsurface Soil L/G
Eric HinkleSubsurface Soil L/G
Eric HinkleSurface Soil L/G
Eric HinkleSubsurface Soil L/G
Eric HinkleSubsurface Soil L/G
Eric HinkleSurface Soil L/G
Eric HinkleSurface Soil L/G
ANALYSIS/TURNAROUND
TM/CN (21)
TM/CN (21)
TM/CN (21)
TM/CN (21)
TM/CN (21)
TM/CN (21)
TM/CN (21)
TM/CN (21)
TM/CN (21)
TM/CN (21)
RecordDate Shipped: 6/28/02
Carrier Name: FedEx
Airbill: 828684710151
Shipped to: Liberty Analytical501 Madison AvenueGary NC 2751 3(919)379-4080
TAO No./PRESERVATIVE
3-556 (Not preserved) (1)
3-560 (Not preserved) (1)
3-564 (Not preserved) (1)
3-568 (Not preserved) (1)
3-572 (Not preserved) (1)
3-576 (Not preserved) (1)
3-580 (Not preserved) (1)
3-584 (Not preserved) (1)
3-588 (Not preserved) (1)
-3-592 (Not preserved) (1)
STATIONLOCATION
SB-1350-0206
SB-DUP-04
Case No
DAS No:
Chain of Custody Record
Relinquished By
: 30647
SamplerSignature: ^
(Date / Time) Received By
R^^^-
(Date /Time)
^ ^/P^fc- &*2& *92- /<£%. >
2
3
4 '
SAMPLE COLLECT ORGANICDATE/TIME SAMPLE No.
S: 6/27/02
S: 6/27/02
SS-F450-0002 S: 6/27/02
SB-F450-0206 S: 6/27/02
SB-F450-1012 S: 6/27/02
SS-G450-0002 S: 6/27/02
SB-G450-0206 S: 6/27/02
SB-G450-1012 S: 6/27/02
SS-H450-0002 S: 6/27/02
SS-G400-0002 S: 6/27/02
8:45
8:45
9:10
9:15
9:20
9:40
9:45
9:50
10:15
10:40
C0109
QCType
'
C01 1 0 Field Duplicate of C01 09
com
C0112
com
C0114
C0115
C0116
com
C0118
—
-
-
-
-
-
-
-
Eric Hinkle
Shipment tor CaseComplete? N
Analysis Key:
TM/CN - CLP TAL Tol
Sample(s) to be used for laboratory QC:
MC0073.MC0078.MC0131
Additional Sampler Signature(s):
Concentration: L = Low, M = Low/Medium, H = High TypeCeslgnate: Composite = C, Grab = G
Chain of Custody Seal Number:
Shipment Iced?
•al Metals and Cyanide
TR Number. 3-424838327-062802-0001PR provides preliminary results. Requests for preliminary results will increase analytical costs.Send Copy to: Contract Laboratory Analytical Services Support, 2000 Edmund Halley Dr., Reston, VA. 20191-3436 Phone 703/264-9348 Fax 703/264-9222 F2V5.0.66 Page 5 of 8
JtHpA USEPA Contract Laboratory Program case NO:"**' JT-* • 9«»»^ 1 &. k ^^
Inorganic Traffic Report & Chain of Custody Record DAS NO:Region: 3
Project Code:
Account Code:
CERCLIS ID:
Site Name/State: Valmont TCE 6724/02/PA
Project Leader: Neil TeamersonAction: Combined RI/FS
Sampling Co: Tetra Tech NUS, Inc.
INORGANICSAMPLE No.
MC0119
MC0120
MC0121
MC0122
MC0123
MC0124
MC0125
MC0126
MC0127
MC0128
MATRIX/ CONG/ ANALYSIS/SAMPLER TYPE TURNAROUND
Subsurface Soil L/G TM/CN (21)(>iryEric HinkleSubsurface Soil L/G TM/CN (21)
Eric HinkleSurface Soil L/G TM/CN (21)
Eric HinkleSubsurface Soil L/G TM/CN (21)
Eric HinkleSubsurface Soil L/G TM/CN (21)
Eric HinkleSurface Soil L/G TM/CN (21)
Eric HinkleSubsurface Soil L/G TM/CN (21)
Eric HinkleSubsurface Soil L/G TM/CN (21)
Eric HinkleSurface Soil L/G TM/CN (21)
Eric HinkleSurface Soil L/G TM/CN (21)
Date shipped: 6/28/02 Chain ofCustody RecordCurrier Name: FftdEx .. _AlrMii. ft9flfiftA7iniRi Relinquished By (Date /Tim
Shipped to: Liberty Analytical 1 / ^^~ £*Z& -02. fa
Gary NC 2751 3 2
3
4
30647 ^
iSr. x^e) Received By (Date / Time)
*ce>
TAG No./ STATION SAMPLE COLLECT ORGANIC QCPRESERVATIVE LOCATION DATE/TIME SAMPLE No. Type
3-596 (Not preserved) (1) SB-G400-0206 S: 6/27/02 10:45 C0119
3-600 (Not preserved) (1) SB-G400-1012 S: 6/27/02 10:50 C0120 * -
3-604 (Not preserved) (1) SS-E500-0002 S: 6/27/02 11:05 C0121
3-608 (Not preserved) (1) SB-E500-0206 S: 6/27/02 11:10 C0122 -
3-61 2 (Not preserved) (1) SB-E500-0911 S: 6/27/02 11:15 C0123
3-616 (Not preserved) (1) SS-E100-0002 S: 6/27/02 12:30 C0124
3-620 (Not preserved) (1) SB-E1 00-0206 S: 6/27/02 12:35 C0125
3-624 (Not preserved) (1) SB-E100-0709 S: 6/27/02 12:40 C0126
3-628 (Not preserved) (1) SS-H100-0002 S: 6/27/02 13:15 C0127
3-632 (Not preserved) (1) SS-DUP-04 S: 6/27/02 13:15 C0128 V Field Duplicate of C01 27
Eric Hinkle •- - r
Shipment for CaseComplete? N
Analysis Key:
TM/CN = CLP TAL Tol
Sample(s) to be used for laboratory QC:
MC0073, MC0078, MC0131
Additional Sampler Signature(s):
Concentration: L = Low, M = Low/Medium, H = High Type/Designate: composite = C, Grab * G
Chain of Custody Seal Number:
Shipment Iced?
al Metals and Cyanide
TR Number. 3-424838327-062802-0001PR provides preliminary results. Requests forprellminary results wilMncrease analytical costs. „„,....«.. ,,«,..,».,.,,Send Copy to: Contract Laboratory Analytical Services Support, 2000 Edmund Halley Dr., Reston, VA. 20191-3436 Phone 703/264-9348 Fax 703/264-9222 F2V6.0.66 Page 6 of 8
ivfcPA USEPA Contract Laboratory ProgramInorganic Traffic Report & Chain of Custody Record
Region:
Project Code:
Account Code:CERCLIS ID:Spill ID:
Site Name/StateProject Leader-
Action:Sampling Co:
INORGANICSAMPLE No.
MC0129
MC0130
MC0131
MC0132
MC0133
MC0134
MC0135
MC0136
MC0137
MC0138
3
: Valmont TCE 6724/02/PA
Nell TeamereonCombined RI/FS
Tetra Tech NUS, Inc.
MATRIX/ CONG/ ANALYSB/SAMPLER TYPE TURNAROUND
Subsurface Soil L/G TM/CN (21)
Eric HinkleSurface Soil L/G TM/CN (21)
Eric HinkleSubsurface Soil L/G TM/CN (21)
Eric HinkleSubsurface Soil L/G TM/CN (21)
Eric HinkleSurface Soil L/G TM/CN (21)
Eric HinkleSubsurface Soil L/G TM/CN (21)
Eric HinkleSubsurface Soil L/G • TM/CN (21)
Eric HinkleSurface Soil L/G TM/CN (21)
Eric HinkleSubsurface Soil L/G TM/CN (21)
Eric HinkleSurface. Soil L/G TM/CN (21)
Date Shipped: 6/28/02
Carrier Name: FedExAirbill: 828684710151
Shipped to: Liberty Analytical501 Madison AvenueCaryNC27513(919)379-4080
TAO No./ STATIONPRESERVATIVE LOCATION
Case No:DAS No:
Chain of Custody Record
Relinquished By (Date / Tim*
1 <£/?'%r 6~2#'#2 /2
3
4
30647 V"\
Sampler .> i /Signature: j^/s^llC ~~
i) Received By (Date / Time)
v*>
SAMPLE COLLECT ORGANIC QCDATE/TIME SAMPLE No. Type
3-636 (Not preserved) (1) SB-H100-0206 8:6/27/02 13:20 C0129 /
3-640 (Not preserved) (1) SS-F1 50-0002 S: 6/27/02 13:45 C0130
3-647 (Not preserved), SB-F1 50-0206 S: 6/27/02 13:50 C01313-648 (Not preserved) (2)
3-652 (Not preserved) (1) SB-F150-0810 S: 6/27/02 13:55 C0132
3-656 (Not preserved) (1) SS-G200-0002 S: 6/27/02 14:20 C0133
3-660 (Not preserved) (1) SB-G200-0206 S: 6/27/02 14:25 C0134
3-664 (Not preserved) (1) SB-G200-0608 5:6/27/02 14:30 C0135
3-668 (Not preserved) (1) SS-H300-0002 S: 6/27/02 14:50 C0136
3-672 (Not preserved) (1) SB-H300-0206 S: 6/27/02 14:55 C0137
3-676 (Not preserved) (1 ) SS-1 7 S: 6/27/02 8:15 C0138
Eric Hinkle
Shipment for Cat*Complete? N
Analysis Key:
TM/CN - CLP TAL To
Sample(s) to be used for laboratory QC:
MC0073, MC0078, MC0131
Additional Sampler Signature(s):
Concentration: L = Low, M = Low/Medium, H = High TypeCeslgnate: Composite » C, Grab = G
Chain of Custody Seal Number;
Shipment Iced?
al Metals and Cyanide
TR Number: 3-424838327-062802-0001PR provides preliminary results. Requests for preliminary results will increase analytical costs. -.„«-,..«,Send Copy to: Contract Laboratory Analytical Services Support, 2000 Edmund Halley Dr., Reston, VA. 20191-3436 Phone 703/264-9348 Fax 703/264-9222 F2V6.0.66 Page 7 of 8
*>fcPA USEPA Contract Laboratory Program case NO: sow? QInorganic Traffic Report & Chain of Custody Record DAS NO: IX
Region: 3Project Code:Account Code:
CERCLISID:Spill ID:
SHe Name/State: Valmont TCE 6724/02/PAProject Leader: Neil TeamereonAction: Combined RI/FS
Sampling Co: Tetra Tech NUS, Inc.
Date Shipped: 6/28/02
Carrier Name: FedEx
Airbill: 828684710151
Shipped to: Liberty Analytical501 Madison AvenueGary NC 2751 3(919)379-4080
Chain of Custody Record
Relinquished By (Date / Time)
1 /?'&~ £'26 -42 /<&2
3
4
Sampler ^" f J/Signature: I//, ^— —
Received By (Date / Time)
* |
INORGANIC MATRIX/ CONC/ ANALYSIS/ TAG No./ STATION SAMPLE COLLECT ORGANIC QCSAMPLE No. SAMPLER TYPE TURNAROUND PRESERVATIVE LOCATION DATE/TIME SAMPLE No. Type
MC01 39 Subsurface Soil L/G
Eric HfnkleMC0141 Field QC/ L/G
Eric Hinkle
MC0142 Field QC/ L/GEric Hinkle
TM/CN(21) 3-680 (Not preserved) (1) SB-17-0206 S: 6/27/02 9:35 C0139
TM/CN(21) 3-687 (HN03), 3-688 RB-01 S: 6/28/02 12:00 C0141 Rlnsate(NaOH) (2)
TM/CN(21) 3-693 (HNO3), 3-694 FB-02 S: 6/28/02 13:00 C0142(NaOH) (2)
Shipment tor CaseComplete? N
Analysis Key:
TM/CN - CLP TAL To)
Samples) to be used for laboratory QC:
MC0073, MC0078, MC0131
Additional Sampler Signature(s):
Concentration: L * Low, M * Low/Medium, H =• High TypeCeslgnate: Composite = C, Grab =* G
Chain of Custody Seal Number
Shipment Iced?
al Metals and Cyanide
TR Number 3-424838327-062802-0001PR provides preliminary results. Requests for preliminary results will increase analytical costs.Send Copy to: Contract Laboratory Anarytteal Services Support, 2000 Edmund Halley Dr., Reston, VA. 20191-3436 Phone 703/264-9348 Fax 703/284-9222 F2VS.0.66 Page 8 of 8
^VCrA USEPA Contract Laboratory ProgramInorganic Traffic Report & Chain of Custody Record
Region:
Project Code:
Account Code:
CERCLIS ID:Spill ID:
Site Name/State
Project Leader:
Action:Sampling Co:
INORGANICSAMPLE No.
MC0143
MC0144
MC0145
MC0146
MC0147
MC0148
MC0149
MC0150
MC0151
MC0152
3
: Valmont TCE 6724/02/PA
Nell TeamersonCombined RI/FS
Tetra Tech NUS, Inc.
MATRIX/ CONG/ ANALYSIS/SAMPLER TYPE TURNAROUND
Surface Soil L/G TM/CN(21)(0"-12"VNeb DedicSubsurface Soil L/G TM/CN(21)
Neb DedicSubsurface Soil L/G TM/CN(21)
Neb DedicSurface Soli L/G TM/CN(21)
Neb DedicSubsurface Soil L/G TM/CN(21)
Neb DedicSubsurface Soil L/G TM/CN(21)
Neb DedicSurface Soil L/G TM/CN(21)
Neb DedicSubsurface Soil L/G TM/CN(21)
Neb DedicSubsurface Soil UG TM/CN(21)
Neb DedicSurface Soil L/G TM/CN(21)
Date Shipped: 7/1/02
Carrier Name: FedExAirbill: 828684645727
Shipped to: Liberty Analytical501 Madison AvenueGary NC 2751 3(919) 379-4080
TAG HoJ STATIONPRESERVATIVE LOCATION
Case No:
DAS No:
Chain of Custody Record
Relinquished By (Date / Time
1 /fa faJ^T 7-l~<>*-/t
2
3
4
30647 Q
££« /#/ feA^
) Received By (Date /Time)
•
SAMPLE COLLECT ORGANIC QCDATE/TIME SAMPLE No. Type
3-699 (Not preserved) (1) SS-F535 S: 6/28/02 8:15 C0143
3-703(1) SB-F535-0206 S: 6/28/02 8:20 C0144
3-707 (Not preserved) (1) SB-F535-0810 S: 6/28/02 8:25 C0145
3-711 (1) SS-D535 S: 6/28/02 8:40 C0146
3-715(1) SB-D535-0206 S: 6/28/02 8:45 C0147
3-71 9 (Not preserved) (1) SB-D535-0810 S: 6/28/02 8:50 C0148
3-723(1) SS-B540 S: 6/28/02 9:10 C0149
3-727 (Not preserved) (1) SB-B540-0206 S: 6/28/02 9:15 C0150
3-731 (Not preserved) (1) SB-B540-0608 S: 6/28/02 9:20 C0151
3-738 (Not preserved), SS-A540 S: 6/28/02 9:30 C0152
Neb Dedic3-739 (Not preserved) (2)
Shipment for CaseComplete? Y
Analysis Key:
TM/CN = CLPTALTot
Sample(s) to be used for laboratory QC:
MC0152. MC0153
Additional Sampler Signatures):
Concentration: L = Low, M = Low/Medium, H = High Type/Designate: Q^
al Metals and Cyanide
poslte = C, Grab = G
Chain of Custody Seal Number:
Shipment lead?
TR Number: 3-424838327-070102-0002PR provides preliminary results. Requests for preliminary results will Increase analytical costs.Send Copy to: Contract Laboratory Analytical Services Support, 2000 Edmund Halley Dr., Reston, VA. 20191-3436 Phone 703/264-9348 Fax 703/264-9222 F2V5.0.66 Page 1 of,'
</EPA USEPA Contract Laboratory ProgramInorganic Traffic Report & Chain of Custody Record
Region: 3
Project Code:
Account Code:
Site Name/State: Valmont TCE 6724/02/PA
Project Leader: Neil TeamersonAction: Combined RI/FS
Sampling Co: Tetra Tech NUS, Inc.
INORGANIC MATRIX/ CONG/ ANALYSIS/SAMPLE No. SAMPLER TYPE TURNAROUND
MC0153 Subsurface Soil L/G TM/CN (21)
Neb DedicMC0154 Subsurface Soil L/G TM/CN (21)
Neb DedicMC0155 Surface Soil L/G TM/CN (21)
Neb DedicMC0156 Subsurface Soil L/G TM/CN (21)
Neb DedicMC0157 Subsurface Soil L/G TM/CN (21)
Neb DedicMC0158 Surface Soil L/G TM/CN (21)
Neb DedicMC0159 Subsurface Soil L/G TM/CN (21)
Neb DedicMC0160 Subsurface Soil L/G TM/CN (21)
Neb DedicMC0161 Surface Soil . L/G TM/CN (21)
Neb DedicMC0162 Subsurface Soil UG TM/CN (21)
Date Shipped: 7/1/02
Carrier Name: FedExAirbill: 828684645727
Shipped to: Liberty Analytical501 Madison AvenueGary NC 27513(919) 379-4080
TAG NoJ STATIONPRESERVATIVE LOCATION
Case No:
DAS No:
Chain of Custody Record
Relinquished By (Date / Tlrm
1
2
3
4
SAMPLE COL LJECT
30647 ^
Signature:
») Received By (Date / Time)
ORGANIC QCDATE/TIME SAMPLE No. Type
3-746 (Not preserved), SB-A540-0206 S: 6/28/02 9:40 C0153 ^ ^ f ' •-«3-747 (Not preserved) (2) . ''"/' '•
3-751 (Not preserved) (1) SB-A540-0607 S: 6/28/02 9:45 C0154
3-755 (Not preserved) (1) SS-A200 S: 6/28/02 10:05 C0155
3-759(1) SB-A200-0206 S: 6/28/02 10:10 C0156
3-763 (Not preserved) (1) SB-A200-0608 S: 6/28/02 10:15 C0157
3-767 (Not preserved) (1 ) SS-A400 S: 6/28/02 10:40 C0158
3-771 (Not preserved) (1) SB-A400-0206 S: 6/28/02 10:45 C0159
3-775 (Not preserved) (1) SB-A400-0608 S: 6/28/02 10:50 C0160
3-779(1) SS-D200-0002 S: 6/28/02 11:10 C0161
'"
3-783 (Not preserved) (1) SB-D200-0206 S: 6/28/02 11:15 C0162
Neb Dedic
Shipment for CaseComplete? Y
Analysis Key:
TM/CN = CLP TAL Td
Samples) to be used for laboratory QC:
MC0152, MC0153
Additional Sampler Slgnature(s):
Concentration: L = Low, M = Low/Medium, H = High Type/Designate: Composite = C, Grab = G
Chain of Custody Seal Number:
Shipment Iced? .__
al Metals and Cyanide
TR Number: 3^124838327-070102-0002PR provides preliminary results. Requests for preliminary results will Increase analytical costs. * *•rao<
Send Copy to: Contract Laboratory Analytical Services Support, 2000 Edmund Halley Dr., Reston, VA. 20191-3430 Phone 703/264-9340 Fax 703/264-9222 page 2 or;
^yEPA USEPA Contract Laboratory ProgramInorganic Traffic Report & Chain of Custody
Region:
Project Code:
Account Code:
Spill ID:
Site Name/State
Project Leader:
Action:
Sampling Co:
INORGANICSAMPLE No.
MC0163
MC0164
MC0165
MC0166
MC0167
MC0168
MC0169
MC0170
MC0171
MC0172
' 3
: Valmont TCE 6724/02/PA
Nell TeamersonCombined RI/FS
Tetra Tech NUS. Inc.
MATRIX/ CONG/ ANALYSIS/SAMPLER TYPE TURNAROUND
Subsurface Soil L/G TM/CN(21)
Neb DedicSurface Soil L/G TM/CN(21)
Neb DedicSubsurface Soil L/G TM/CN(21)
Neb DedicSurface Soil L/G TM/CN(21)
Neb DedicSubsurface Soil L/G TM/CN(21)
Neb DedicSubsurface Soil L/G TM/CN(21)
Neb DedicSurface Soil L/G TM/CN(21)
Neb DedicSubsurface Soil L/G TM/CN(21)
Neb DedicSubsurface Soil L/G TM/CN(21)
Neb DedicSurface .Soil L/G . TM/CN(21)
Date Shipped: 7/1/02
Carrier Name: FedEx
Airbill: 828684645727
Shipped to: Liberty Analytical501 Madison AVEGary NC 27513(919) 379-4080
TAONoJPRESERVATIVE
3-787 (Not preserved) (1)
3-791 (Not preserved) (1)
3-795 (Not preserved) (1)
3-799 (Not preserved) (1)
3-803 (Not preserved) (1)
3-807 (Not preserved) (1)
3-811 (Not preserved) (1)
3-81 5 (Not preserved) (1)
3-81 9 (Not preserved) (1)
3-823 (Not preserved) (1)
Case No: 30647 ^
Record DASNO: |>
Chain of Custody Record l""1^
Relinquished By (Date /Time) Received By (Date /Time)
1
2
3
4
STATION SAMPLE COLLECT ORGANIC QCLOCATION DATE/TIME SAMPLE No. Type
SB-D200-1012 S: 6/28/02 11:20 C0163
SS-I200-0002 S: 6/28/02 11:35 C0164
SB-I200-0206 S: 6/28/02 11:40 C0165
SS-C350-0002 S: 6/28/02 12:15 C0166 -
SB-C350-0206 S: 6/28/02 12:20 C0167 - -
SB-C350-0911 S: 6/28/02 12:30 C0168
SS-D350-0002 S: 6/28/02 12:50 C0169
SB-D350-0206 S: 6/28/02 13:00 C0170
SB-D350-1012 S: 6728/02 13:10 C0171
SS-E350-0002 S: 6/28/02 13:40 C0172
Neb Dedic
Shipment for CaseComplete? Y
Analysis Key:
TM/CN = CLPTALTol
Sample(s) to be used for laboratory QC:
MC0152, MC0153
Additional Sampler Slgnature(s):
Concentration: L = Low, M = Low/Medium, M = High Type/Deslgnata composite = C, Grab = G
Chain of Custody Seal Number:
Shipment Iced? ..
al Metals and Cyanide
TR Number: 3-424838327-070102-0002PR provides preliminary result*. Requests for preliminary results will Increase analytical costs.Send Copy to: Contract Laboratory Analytical Services Support, 2000 Edmund Halley Dr., Reston, VA. 20191-3436 PflOfie 703/264-9348 Fax 703/264-9222 F2V5.0.6gPafle3of!
V>EPA USEPA Contract Laboratory Program case NO:Inorganic Traffic Report & Chain of Custody Record DAS NO:
Region:
Project Code:
Account Code:
Spill ID:Site Name/State
Project Leader:
Action:Sampling Co:
INORGANICSAMPLE No.
MC0173
MC0174
MC0175
MC0176
MC0177
MC0178
MC0179
MC0180
MC0181
MC0182
3
I
: Valmont TCE 6724/02/PA
Neil TeamersonCombined RI/FS
Tetra Tech NUS, Inc.
MATRIX/ CONC/ ANALYSIS/SAMPLER TYPE TURNAROUND
Subsurface Soil UG TM/CN(21)
Neb DedicSubsurface Soil L/G TM/CN(21)
Neb DedicSurface Soil UG TM/CN(21)
Neb DedicSubsurface Soil UG TM/CN(21)
Neb DedicSubsurface Soil UG TM/CN(21)
Neb DedicSurface Soil UG TM/CN(21)
Neb DedicSubsurface Soil UG TM/CN(21)
Neb DedicSubsurface Soil UG TM/CN(21)
Neb DedicSurface Soil UG . TM/CN(21)
Neb DedicSubsurface Soil UG TM/CN(21)
Date Shipped: 7/1/02
Carrier Name: FedExAirbill: 828684645727
Shipped to: Liberty Analytical501 Madison AverGary NC 27513(919)379-4080
TAG No/PRESERVATIVE
3-827 (Not preserved) (1)
3-831 (Not preserved) (1)
3-835 (Not preserved) (1)
3-839 (Not preserved) (1)
3-843 (Not preserved) (1)
3^47 (Not preserved) (1)
3-851 (Not preserved) (1)
3-855 (Not preserved) (1)
3-859 (Not preserved) (1)
3-863 (Not preserved) (1)
Chain of Custody Record
Relinquished By (Date / Tim
1
2
3
4
30647 ^
SamplerSignature:
a) Received By (Date /Time)
STATION SAMPLE COLLECT ORGANIC QCLOCATION DATEmME SAMPLE No. Type
SB-E350-0206 S: 6/28/02 13:45 C0173
SB-E350-0709 S: 6/28/02 . 13:50 C0174
SS-F350-0002 S: 6/28/02 14:10 C0175
SB-F350-0206 S: 6/28/02 14:15 C0176
SB-F350-1012 S: 6/28/02 14:20 C0177
SS-G350-0002 S: 6/28/02 14:45 C0178 -" -
-r
SB-G350-0206 S: 6/28/02 14:55 C0179
SB-G350-0911 S: 6/28/02 15:00 C0180
SS-DUP-05 S: 6/28/02 12:00 C0181 Field DuplicateOf. Aico/^6 \
SB-DUP-05 S: 6/28/02 12:05 C0182 Field Duplicatejf^ ^ f^ j^ «« V j* "* *
Neb Dedic
Shipment for CaseComplete? Y
Analysis Key: .
TM/CN = CLPTALTol
Samplers) to be used for laboratory QC:
MC0152, MC0153
Concentration: L = Lc
al Metals and Cyanide
Additional Sampler Signature ):
w, M = Low/Medium, H = High Type/Designate: ^mposlte = C, Grab = G
Chain of Custody Seal Number:
Shipment Iced? ., .
TR Number: 3-424838327-070102-0002 m^PR provides preliminary results. Requests for preliminary results will Increase analytical costs. a «.«»»send Copy to- Contract Laboratory Analytical Services Support, 2000 Edmund Haffey Dr., Reston, VA. 20191-3436 Phone 7031264-9348 Fax 7031264-9222
oEPARegion:
Project Code:
Account Code:
CERCLIS ID:
Spill ID:
Site Name/State:
Project Leader:Action:
Sampling Co:
INORGANICSAMPLE No.
MC0184
MC0185
USEPA Contract Laboratory ProgramInorganic Traffic Report & Chain of Custody Record
3
ValmontTCE6?24/02/PA
Neil TeamersonCombined RI/FS
Tetra Tech NUS, Inc.
Date Shipped: 7/1/02
Carrier Name: FedEx
Airbill: 828684645727
Shipped to: Liberty Analytical501 Madison AvenueGary NC 2751 3(919) 379-4080
Case No: 30647 [
DAS No: |>
Chain of Custody Record
Relinquished By (Date /Time)
1
2
3
4
SamplerSignature:
Received By (Date / Time)
MATRIX/ CONG/ ANALYSIS/ TAG No./ STATION SAMPLE COLLECT ORGANIC QCSAMPLER TYPE TURNAROUND PRESERVATIVE LOCATION DATE/TIME SAMPLE No. Type
Field QC/ L/G TM/CN (21) 3-871 (HNO3), 3-872 RB-02 / S: 6/28/02Neb Dedlc (NaOH) (2)
Field QC/ L/G TM/CN (21) 3-877 (HNO3), 3-878 FB-03 S: 6/28/02Neb Dedic (NaOH) (2)
16:00 C0184 Rinsate
12:15 C0185 P|r
Shipment for CaseComplete? Y
Analysis Key:
TM/CN = CLP TALTol
Sample(8) to be used for laboratory QC:
MC0152, MC0153
Additional Sampler Slgnaturefs):
Concentration: L - Low, M = Low/Medium, H = High Type/Designate: Composite = C, Grab = G
Chain of Custody Seal Number:
Shipment Iced? .,.,
a! Metals and Cyanide
TR Number: 3-424838327-070102-0002 DEPR provides preliminary results. Requests for preliminary results will Increase analytical costs. Rt Sto
Send Copy to: Contract Laboratory Analytical Services Support, 2000 Edmund Halley Dr., Reston, VA. 20191-3436 Phone 703/264-9348 Fax 703/264-9222 F2V5.0.66 Page5of.'
JudySnyder , To: [email protected]:
07/22/02 01:59 PM Subject: inorganic portion of 30647, Valmont TCE: need Regional copies ofsome COC's and memo to file
Dear Neil: We need the Regional copies of the COC/TR's 3-424838327-062502-001 pages onethrough three. We need the field QC information and duplicate pairs.
Memo to file needed for the following errors/discrepancies:1. Sampler did not sign/relinquish COC pages 2 and 3 of 3-424838327-070102-002. You need to state inthe memo who relinquished the samples and the date and time of relinquishment.2. Sample MC0005 was listed on COC page one of 3-424838327-062502-01 but was not shipped, per labdocumentation. -The lab did receive sample MC0004, tag 3-115 sampled 6-24-02 @ 9:55 from stationlocation SB-DOO-0206 which is not listed on the COC. Sampler will please delete MC0005 and addMC0004 by memo to file.3. Tag 3-878 was crossed off on the lab copy of the COC for sample MC0185 but the cyanide analysiswhich would have been done on this aliquot was not crossed off. Also the cross through was no dated.The lab analyzed the total metals aliquot only. Sampler will please indicate who cancelled the cyanidealiquot and on what date and confirm that the cyanide analysis and tag 3-878 were indeed cancelled, ifthat was the intent.4. Tags listed on the COC for sample MC0078 are 3-423 and 3-515. Tag number 3-423 is incorrect. Theactual tag number is 3-424.5. Tags listed on COC for MC0073 are 3-402 and 3-523. Tag #3-4-3 is incorrect on the COC. The actualtag number for MC0073 is 3-404.6. Neither the tag nor the COC list a sample collection time for MC0087.
For the very large number of samples collected on the inorganic portion of this case alone, thedocumentation errors were minimal. Good job.
Judy SnyderESAT Auditor, Region 3Lockheed Martin Environmental Services701 Mapes RoadFt. Meade, MD 20755-5350Phone 410-305-3015Fax 410-305-3095
TETRA TECH NUS, INC.600 Clark Avenue, Suite 3 • King of Prussia, PA 19406-1433(610) 491-9688 • FAX (610) 491-9645 • www.tetratech.com
PHIL-16425
July 29', 2002
Project Number 4192
Ms. Judy SnyderESAT Auditor, Region 3Lockheed MartinEPA Environmental Science Center701 Mapes RoadFort Meade, Maryland 20755-5350
Subject: Memo to FileCase Number 30647Valmont TCE,J-iazleton, Pennsylvania
Dear Ms. Snyder:
This is a memo to correct documentation errors for the Valmont TCE sampling event.
• Sampler Neb Dedic should have signed and relinquished pages 2 through 5 forCOC 3-424838327-070102-002 on 07/01/02 at 20:00.
• The inorganic soil sample MC0005 listed on Traffic Report (TR) # 3-424838327-062502-01 for TM/CNanalysis is incorrectly listed. A correction should be made to list sample MC0004 collected on 6/24/02 at09:55 instead of sample MC0005 collected on 6/24/02 at 10:00.
• Sampler Neb Dedic crossed off the tag # 3-878 for sample MC0185, the cyanide analysis should also havebeen crossed off and the changes should have been initialed and dated by the sampler.
• Tags listed on the COC for sample MC0078 are 3-423 and 3-515. Tag number 3-423 is incorrect. The actualtag number is 3-424.
• Tags listed on the COC for sample MC0073 are 3-403 and 3-523. Tag # 3-403 is incorrect on the COC. Theactual tag number for MC0073 is 3-404.
/• The collection time for sample MC0087 was 13:40 on 6/26/02, this information was mistakenly omitted from
the COC and the lag.
We apologize for the inconvenience. Please do not hesitate to call if you have any questions.
Respectfully,
Daniel Hartigan
DH/vh
Romuald Roman (EPA Region 3)Neil Teamerson (TtNUS)File No. 3.2
Melissa Stevens
.Melissa Stevens <[email protected]>Holly Rogers <[email protected]>Tuesday, July 16, 2002 4:02 PM30647-071602.pdf30647
From:To:Sent:Attach:Subject:Hi Holly,
I forgot to send you an e-mail about this. Sample MC0185 is listed as TM/CN, -but we only received TM. If youtake a look at the traffic report the sampler marked the CN tag number out, but did not nnark the CN off from theanalysis colume. Please see attachment.
Melissa StevensEPA Coordinator(919)379-4081CompuChem a division of Liberty [email protected]
•"> ! PX<~ *-»*
07/16/02
TETRA TECH NUS, INC.600 Clark Avenue, Suke 3 • King of Prussia, PA 19406-1433 /• /(610) 491-9688- FAX (610) 491-9645. www.tetratech.com '' / Jin
• />/*nPHIL-16367 ; ///V^7'-
\ / A 5 " r% '\ T-'I <r~* i f°*t «..*,'. . • ' " * • • •'!''•'Project Number 4192 V AlJ DATUM 8 CCr Y -
July 2, 2002
Ms. Betty Ann JefferyUnited States Environmental Protection Agency, Region 3Office of Analytical Services and Quality AssuranceThe Environmental Science Center701 Mapes RoadFort Meade, Maryland 20755-5350
Subject: Case Number 30647Valmont TCEMemo to File
Dear Ms. Jeffery: '
In response to sample listing issue regarding the-case # 30647:
The inorganic soil sample MC0005 listed on Traffic Report (TR) # 3-4248327-062502-0001 forTM/CN analysis is incorrectly listed. A correction should be made and list sample MC0004collected on 6/24/02 at 09:55 instead the sample MC0005 collected on 6/24/02 at 10:00.
We apologize for the erroneous sample listing on the Chain of Custody documents and causingthe discrepancy. Thank you for your cooperation and please contact us if you need additionalinformation in solving this issue.
Respectfully,
Neb DedicEarth Scientist
ND/vh
Roman Romuald (EPA Region 3)Dan Slizys (EPA Region 3)Holly Rogers (CLASS)
Melissa Stevens
From: Rogers, Holly <[email protected]>To: Alice Evans (E-mail) <[email protected]>; Melissa Stevens-(E-mail)
<[email protected]>Cc: Betty Ann Jeffery (E-mail) <[email protected]>; Dan Slizys tE-mail)
<[email protected]>; John Kwedar (E-mail) <[email protected]>; Khin-ChoThaung (E-mail) <[email protected]>
Sent: Friday, June 28, 2002 9:23 AMSubject: Region 03 | Case 30647 | Lab LIBRTY | Issue TR/COC discrepancy - sample level | FINALAlice,
Following is the resolution from Region 3 regarding the TR discrepancy issuefor Case 30647. Per the Region, the lab should note the issue in theCase/SDG narrative and proceed with the analysis of the samples. Thesampler has been instructed to write a memo to file to clear up thediscrepancy.
Please let me know if you have any other questions or problems.
Thanks,Holly
Holly RogersDynCorp Systems and Solutions LLCCLP Coordinator for Regions 3 & [email protected] <mailto:[email protected]>
Original MessageFrom: [email protected] [mailto:[email protected]]Sent: FndayTJune 28, 2002 7:29 AMTo: Rogers, Holly; [email protected]; [email protected];[email protected]:"R"eTNEW ISSUE | Case 30647 | Lab LIBRTY | Issue TR/COC discrepancy- sample level
Holly,
The Region III CST Brokerage is waiting for the field personnel to respondto this issue. The field personnel are the only ones that can resolve thisissue. They will have to write a memo to file for TR/COC discrepancy.The lab should proceed with the analysis of samples and document this issuein the case narrative.
Dan Slizys
From: "Rogers, Holly"<[email protected]>
To: Betty Jeffery/ESC/R3/USEPA/US@EPA, Dan Slizys/ESC/R3/USEPA/US@EPA,John Kwedar/ESC/R37USEPA/US@EPA, Khin-Cho " ' "
Thauhg/ESC/R3/USEPA/US@EPA 077_ - - - - . _ . . . L _ / /
06/23/02
cc:Subject: NEW ISSUE | Case 30647 | Lab LIBRTY | Issue TR/COC discrepancysample level06/27/02 03:50PM
The lab is still waiting on a resolution to this issue. Please advise thelab how to proceed.
Thanks,Holly
Holly RogersDynCorp Systems and Solutions LLCCLP Coordinator for Regions 3 & [email protected] <mailto:[email protected]>
Original MessageFrom: [email protected] [mailto:[email protected]]Sent: Thursday, June 27, 2002 1:09 PMTo: Rogers, Holly; [email protected]; [email protected];[email protected]: Betty Ann Jeffery (E-mail); John Kwedar (E-mail); Khin-Cho Thaung(E-mail)Subject: Re: NEW ISSUE | Case.30647 | Lab LIBRTY | Issue TR/COC discrepancy- sample level
Everyone,
The field personnel will have to investigate and resolve this sampleidentity issue on TR/COC. They are requested to provide feedback assoon as possible so analysis of samples would not be impeded.
Dan SlizysA-
From: "Rogers, Holly"<[email protected]>To: Betty Jeffery/ESC/R3/USEPA/US@EPA, Dan Slizys/ESC/R3/USEPA/US@EPA,John Kwedar/ESC/R3/USEPA/US@EPA, Khin-Cho :
"Thaung/ESC/R3/USEPA/US@EPAcc:Subject: NEW ISSUE | Case 30647 | Lab LIBRTY | Issue TR/COC discrepancy -sample level06/27/02 11:48 AM
The lab is still waiting on a resolution to this issue. Please advise thelab how to proceed.
Thanks,Holly
278
06/28/02
Holly RogersDynCorp Systems and Solutions LLCCLP Coordinator for Regions 3 & [email protected] <mailto:[email protected]>
Original MessageFrom: Rogers, HollySent: Wednesday, June 26, 2002 2:23 PMTo: Betty Ann Jeffery (E-mail); Dan Slizys (E-mail); John Kwedar (E-mail);Khin-Cho Thaung (E-mail)Subject: NEW ISSUE | Case 30647 | Lab LIBRTY | Issue TR/COC discrepancy -sample levelImportance: High
Following is an email from LIBRTY regarding samples received on 6/26 forCase 30647.
s
Soil sample MC0005 was listed on the TR for TM/CN analysis but was notreceived by the lab. However, the lab did receive soil sample MC0004, whichwas not listed on the TR. The sample collection date and,time listed forsample MC0005 is 6/24 09:55. The sample collection date and time listed onthe tag for sample MC0004 is 6/24 10:00.
Please advise the lab how to proceed.
Thanks,Holly
Holly RogersDynCorp Systems and Solutions LLCCLP Coordinator for Regions 3 & [email protected] <mailto:[email protected]>
Original MessageFrom: Alice Evans [mailto:[email protected]]Sent: Wednesday, June 26, 2002 1:53 PMTo: Rogers, HollySubject: Case 30647Importance: High
Holly,
Liberty received 20'soils and 1 water for Total Metals and Cyanides on06/26/02.
1. Received sample MC0004 which is not listed on the Traffic Report. Thesample Date is 06/24/02, the time collected is 09:55 (label on thebottle). Soil - 8 oz jar. Tag no. 3-115.
279
t)6/28/02
2. Sample MC0005 is listed on the Traffic Report but we did not receivedthe sample (date collected: 06/24/02, Time 10:00) Soil.
Thanks,Alice
Alice EvansCompuChem/Liberty501 Madison AveCary,NC 27513919-379-4080
280
06/28/02
Page 1 of2
Alice Evans <
From: Rogers, Holly <[email protected]>To: Alice Evans (E-mail) <[email protected]>; Melissa Stevens {E-mail)
<[email protected]>Cc: Betty Ann Jeffery (E-mail) <[email protected]>; Dan Slizys (E-mail)
<[email protected]>; John Kwedar (E-mail) <[email protected]>; Khin-ChoThaung (E-mail) <[email protected]>
Sent: Wednesday, July 03, 2002 10:19 AMSubject: Region 03 | Case 30647 | Lab LIBRTY | Issue TR/COC discrepancy - sample level | FINALAlice, , u
Following is the resolution from Region 3 regarding the TR discrepancy forCase 30647. Per the Region, the lab should document the issue in theCase/SDG narrative and proceed with the analysis of the samples.
I f - y o u have any other questions or problems, please let me know.
Thanks,Holly
Holly Rogers - :
DynCorp Systems and Solutions LLCCLP Coordinator for Regions 3 & [email protected] <mailtci:[email protected]>
Original MessageFrom: [email protected][mailto:[email protected]]Sent: Wednesday, July 03, 2002 10:12 AMTo: Rogers, HollyCc: Dan Slizys (E-mail) ; John Kwedar (E-mail); Khin-Cho Thaung (E-mail)Subject: Re: NEW ISSUE I Case 30647 | Lab LIBRTY I Issue TR/COC discrepancy- sample level
Holly, the lab must document the TR/COC discrepancy in the case narrativeand continue with the analysis.. Thanks
From: "Rogers, Holly"<[email protected]>
To: Betty Jeffery/ESC/R3/USEPA/US@EPA, Dan Slizys/ESC/R3/USEPA/US6EPA,John Kwedar/ESC/R3/USEPA/US@EPA, Khin-Cho
Thaunq/ESC/R3/USEPA/US@EPAcc:Subject: NEW ISSUE | Case 30647 | Lab LIBRTY | Issue TR/COC discrepancy -sample level07/03/02 09:23 AM
The lab is still waiting on a resolution to this issue. Please advise thelab how to proceed.
Thanks,Holly
Holly RogersDynCorp Systems and Solutions LLCCLP Coordinator for Regions 3 & [email protected] <mailto:[email protected]>
Original MessageFrom: Rogers, HollySent: Monday, July 01, 2002 1:08 PM OO1
381
07/11/02
Page 2 of 2
To: Betty Ann Jeffery (E-mail); Dan Slizys (E-mail); John Kwedar (E-mail);Khin-Cho Thaung (E-mail)Subject: NEW ISSUE I Case 30647 | Lab LIBRTY | Issue TR/COC discrepancy -sample levelImportance: High
This is Jessica Brown, Holly is out for the day.
Per LIBRTY, the sample collection time was not listed on the TR/COC,received 6/29/02, for sample MC0087, Case 30647. Please advise on how thelab should proceed.
Thanks,Jessica
11:07AM 7/01/02Jessica Brown, SMO, spoke with" Alice Evans, LIBRTY, concerning Case 30647.The sample collection time was not listed on the TR/COC for sample MC0087.
Holly RogersDynCorp Systems and Solutions LLCCLP Coordinator for Regions 3 & 9703-264-9526holly, [email protected] <iuailto:holly. roqers@dyncorp. com>
382
07/11/02
Region III Sample Scheduling Request Form
RASCASENo:CT1363 / 3O (s>^=^
Date:
DAS No:
Data Validation Level: M-3 *f "$. r^J - 3_
Site Name: Valmont Rlitmlil'Jl ParltSitc- / CL-fc:
Address: Deer Run Road
Latitude:
Program: SUPERFUND
Longitude:
NSF No:
EPA Lab Reply:
Cost:
City: West Hazleton
CERCL1S No: PAD982363970
Account No:-OOTONFAX03*M€e04-
Preparer: Russell Sloboda
Phone: 610-491-9688
FAX: 610-491-9645
E-mail: [email protected]
EPA CO: Al PInero
Lab Assignment Date:
Organic Lab: (__€. \ V
Inorganic Lab: l — l t
SAMPLES
100
10
5
/OO
iO
Operable Unit:
RPM/PO:Romuald Roman
Phone: 215-814-3212
FAX: 215-814-3002
E-mail: Romuald [email protected]
Contract Type: RAC 3
State: PA
Anal +Val Data TAT:42 days
Activity: RI/FS
Spill ID:
Site Leader: Neil Teamerson
Phone: 610-491-9688
FAX: 610-491-9645
E-mail: [email protected]
Prime: Tetra Tech NUS
Analytical TAT: 21
vvT <—3^TVMETHOD
OLM04.2
OLM04.2
OLM04.2
l l f \ 0* - \
ILHOV.I
days
Sub:
Ship Date From: 06724/02
Ship Date To: 07/05/02
Carrier:
PARAMETER
TCL / 9 £fo $
VOCs /9s-&7VOCs/SVOCs/Pest/PCBs / "jS&ff
~~ TA I— •-•-xE.' 'sl ^ f C«-/'J>A-1» A-<4_ //3^>9
'A( fOi^tc^lS / Cc/3ru<^-£- ' f 5 ™ f)
\
MATRIX
Soil
AQ
AQ
^0. /
^J l" *")/\ \i<_
NOTE: Data validation levels M3 & IM2 require justification. QC field samples must be included as part of total number of samples.
1. Special Instructions: Send results to: Neil Teamerson, Tetra Tech NUS 600 Clarke Ave., Ste. 3, King of Prussia, PA 194062. Objectives / Project Plan ID / Permit ID: validated data used later for risk assessment: (Not Drinking Water)3. Program / Project / Permit Reporting Limits According to method used.4. DQO (QC Requirements) According to method used.
Teamerson, Neil" To: Lisa Penix/ESC/R3/USEPA/US@EPA<TeamersonN@TTNus. cc:Com> Subject: FW: Valmont Soil Samples
08/20/02 11:14 AMVALIDATOR'S COPY
> Original Message> From: Teamerson, Neil> Sent: Friday, August 16, 2002 1:21 PM> To: '[email protected]'> Subject: Valmont Soil Samples>> MC0031 (SS-DUP-01) is the dup of MC0030 (SS-G500-0002)>> MC0018 (SB-DUP-01) is the dup of MC0017 (SB-J250-0709)>> Neil Teamerson> Tetra Tech NUS, Inc. (TtNUS)> 600 Clark Avenue, Suite 3> King of Prussia, PA 19406-1433> (610) 491-9688> .(610) 491-9645 (facsimile)> [email protected]
APPENDIX D
Laboratory Case Narrative
Lab Name: COMPUCHEM
Lab Code: LIBRTY
U. S, EPA - CLPCOVER PAGE - INORGANIC ANALYSES DATA PACKAGE
Contract: 68W00082
SAS No.: •Case No.: 30647
SOW No. : ILM04.1
SDG No.: MC0002
EPA Sample No.
MC0002MC0004MC0012MC0014MC0015MC0017MC0018MC0020MC0020DMC0020SMC0021MC0022MC0023MC0024MC0025MC0027MC0028MC0029MC0030MC0031MC0032
Here ICP interelement corrections applied?
Were ICP background corrections applied?If yes-were raw data generated beforeapplication of background corrections?
Lab Sample ID.
MC0002-43MC0002-44MC0002-45MC0002-46MC0002-47MC0002-48MC0002-49MC0002-50WG18450-2.WG18450-1MC0002-51MC0002-52MC0002-53MC0002-54MC0002-55MC0002-56MC0002-57MC0002-58MC0002-59MC0002-60MC0002^61
Yes/No YES
Yes/No YES
Yes/No NO
Comments: THE FOLLOWING ANALYTES HAVE BEEN FLAGGED WITH AN "E" TO INDICATE SERIALDILUTION RESULTS WHICH ARE NOT WITHIN CONTROL LIMITS:
I certify that this data package is in compliance with the terms and conditions of thecontract, both technically and for completeness, for other than the conditions detailedabove. Release of the data contained in this hardcopy data package and in the computer-readable datasubmitted on diskette has been authorized by the Laboratory Manager or the Manager's designee, asverified by the following signature.
Signature ;•
Date:
Name:
Title:
iCOVER PAGE - IN ILM04.1
U. S. EPA - CLPCOVER PAGE - INORGANIC ANALYSES DATA PACKAGE
Lab Name: COMPUCHEM \ Contract: 68W00082
Lab Code: LIBRTY Case No.: 30647 SAS No.: SDG No.: MC0002
SOW No. : ILM04.1
EPA Sample No. Lab Sample ID.
MC0033 MC0002-62
Were ICP interelement corrections applied? Yes/No YES
Were ICP background corrections applied? Yes/No YESIf yes-were raw data generated beforeapplication of background corrections? Yes/No NO
Comments: THE FOLLOWING ANALYTES HAVE BEEN FLAGGED WITH AN "E" TO INDICATE SERIALDILUTION RESULTS WHICH ARE NOT WITHIN CONTROL LIMITS:MACTTTT.CiTTTM
I certify that this data package is in compliance with the terms and conditions of thecontract, both technically and for completeness, for other than the conditions detailedabove. Release of the data contained in this hardcopy data package and in the computer-readable datasubmitted on diskette has been authorized by the Laboratory Manager or the Manager' s designee, asverified by the following signature.
Signatures —T *- ^ •/ • L yV-X . Name:
f] f] QDate: (Ju (x/ ' C/-U (L. Title:
71
COVER PAGE - IN ILM04.1
CompuChema Division of Liberty Analytical Corp.•501 Madison Avenue Cary.NC 27513
SDG NARRATIVECASE # 30647 SDG # MC0002
CONTRACT # 68W00082
The indicated Sample Delivery Group (SDG) consisting of twenty (20) soil samples was received into thelaboratory information management system (LIMS) on June 26, 2002; intact and in good condition \vithChains of Custody (COC) Records in order, unless otherwise noted in any attachments or QualityAssurance Notices. Sample ID's reported in this data package are noted by the receiving department on theCOC if they differ from those listed by the samplers on the COC.
The samples were analyzed, in accordance with EPA - CLP Statement of Work (SOW) document ILM04.1for CLP TAL total metals and cyanide.
The correlation coefficients for the mercury and cyanide analytical runs are confirmed to be > 0.9950.
The cooler temperature bottle was present with samples received on June 26, 2002; and sampletemperature was 7.1 degrees Celsius.
LIBRTY did not receive sample MC0005 (with collection date and time 06/24/02 - 10:00) as listed on theTraffic Report but received sample MC0004 (with collection date and time 06/24/02 - 9:55). "
The Laboratory Control Sample (LCS) for sodium analyzed outside the control limits established for thatanalyte. Sodium is present in the LGS below the CRDL. Thus, the control limits are only advisory limits.
EQUATIONS FOR SOLID SAMPLE CALCULATIONS:
Client sample MC0020 is used for illustration.
Any sample result that is < the instrument detection limit (IDL) will be entered at the IDL for thatanalyte.
ICP Equation:Equation for obtaining metals sample results in mg/Kg as presented on FORM I data sheets from ICPinstrument acquired results in ug/L (ppb).
C x D x VConcentration (% solids) (mg/Kg)
W x SWhere
C = concentration (ug/L)D = dilution factorV = final volume in liters after sample preparationW = weight in grams of wet sampleS = % solids/100
Example: aluminum result ug/L to mg/Kg.52195.07 ug/L (C) x 1 (D) x 0.2 L(V)
= 11943.95 mg/Kg reported as 11900 mg/Kgl .Og(W) x 0.874 (S)
Mercury Equation:
Equation for obtaining mercury sample results in mg/Kg as presented on FORM I data sheets frominstrument acquired results in ug/L (ppb).
A x D x F
B x EWhere
A = ug/L HgB = wet weight of sampleD = dilution factor to bring sample into analysis rangeE = % solids/100F = final volume in liters (0.1 L)
Example: mercury result ug/L to mg/Kg0.1307 ug/L (A) x 1(D) x 0.1 (F)
= 0.0748 mg/Kg reported as 0.075 mg/Kg0.2 g(B) x 0.874 (E) :
Cyanide Equation:
Equation for obtaining cyanide sample results in mg/Kg as presented on FORM I data sheets frominstrument acquired results in ug/L (ppb).
A x D x F
B x EWhere
A = ug/LCNB = wet weight of sampjeD = dilution factor to bring sample into analysis rangeE = %solids/100F = final volume in liters (0 05 L)
Example: cyanide result ug/L to mg/Kg0.887464 ug/L (A) x 1 (D) x 0.05 L (F)
= 0.0508 mg/Kg reported as 0.051 mg/Kgl.OOg(B) x 0.874 (E)
SAMPLE IDs:f
The following customer IDs are associated with this SDG:
MC0002 MC0004 MC0012 MC0014 MC0015 MC0017
MC0018 MC0020 MC0021 MC0022 MC0023 MC0024
MC0025 MC0027 MC0028 MC0029 MC0030 MC0031
MC0032 MC0033
7
INSTRUMENTAL QUALITY CONTROL:
All calibration verification solutions (ICV & CCV), blanks (ICB, & CCB), and interference check samples(ICSA & ICSAB) associated with this data were confirmed to be within EPA CLP allowable limits.
SAMPLE PREPARATION QUALITY CONTROL:
The sample preparation procedure verifications (LCSS & PBS) were found to be within acceptable rangesand all field samples were prepared and analyzed within the contract specified holding times.
MATRIX RELATED QUALITY CONTROL:
The sample matrix spike, CCN = WG18450-1 (MC0020S) was found to be outside CLP control limits forantimony, lead, and selenium. The reported concentrations for these analytes are flagged with an "N" onall associated Form 1 and on Form 5a.
An "N" indicates a matrix-related interference in the sample preparation procedure &/or analysis for theflagged analyte. This is normally the consequence of a relatively high anionic content in the sample or (forsome sediments) an inconsistent sample matrix relative to that analyte.
CLP control limits for matrix spike recoveries are set at 75% to 125% of the analyte quantity added unlessoriginal sample concentrations exceed the true values of these "spikes" by a factor of four or more. In thiscase, affected analytes are not flagged even if recoveries are outside percentage recovery control limits.
Post-digestion spikes are mandatory for analytes demonstrating unsatisfactory matrix spike recoveriesduring ICP analysis (excluding silver). The results of such spikes are presented on Form 5b.
Unsatisfactory recovery of post-digestion spikes of this type do not have bearing upon the aforementioned"N" flags, but may indicate interference during analysis &/or a solution matrix which is hostile to theanalyte in question.-
Satisfactory recovery of an analyte in a post-digestion spike of this type implies interference by therequired preparation procedure or in the sample matrix itself. Lack of uniformity for an analyte insediments will also result in satisfactory recovery of post-digestion spikes after failure in the related matrixspike.
The sample matrix duplicate, CCN = WG 18450-2 (MC0020D) was outside CLP control limits formanganese and zinc. The reported concentrations for these analytes are flagged with a "*" on allassociated Form 1 and on Form 6.
A "*" indicates a non-homogeneous sample matrix in regard to the flagged analyte. This is normally theconsequence of a relatively coarse texture or of a mixed-matrix in sediment samples.
CLP control limits for duplicate determinations are +/- 20% Relative Percent Difference (RPD) forconcentrations greater than or equal to five times the CRDL in both the original and duplicate samples, and+/- the CRDL for concentrations less than five times the CRDL. The RPD is not calculated if both theoriginal and duplicate values fall below the IDL.
A five-fold serial dilution of sample, CCN = MC0002-50 (MC0020L) was performed in accordance withCLP requirements for ICP analysis.
The adjusted sample concentrations were outside CLP control limits for magnesium and zinc, which areflagged with an "E" on all associated Form 1, the Cover Page and Form 9.
8
An "E" indicates that a chemical or physical interference effect was encountered during the analysis of theflagged analyte. As a result of this interference, all values for the analyte in the same matrix must beconsidered to be estimated quantities.
CLP control limits for serial dilution are defined as a deviation less than or equal to 10% in the dilution-adjusted concentrations from the original values for all analyte concentrations with values greater thanfifty (50) times their respective Instrument Detection Limit (IDL) in the original sample.
The laboratory manager or his designee, as verified by the following signature has authorized release of thedata contained in this hard copy data package.
Thomas R. ColeData Reviewer IIJuly 9, 2002
CompuChema Division of Liberty Analytical Corp.501 Madison Avenue Cary.NC 27513
DATA REPORTING QUALIFIERS FOR INORGANICS
On Form I, under the column labeled "C" for concentration qualifier and "Q" for qualifier, each result is flagged with the specific datareporting qualifiers listed below, as appropriate. Up to five qualifiers may be reported on Form I for each analyte.
The C (concentration) qualifiers used are:
U: This flag indicates the analyte was analyzed for but not detected. This reported value was obtained from a reading thatwas less than the Instrument Detection Limit (1DL). The 1DL will be adjusted to reflect any dilution and, for soils, the
percent moisture.
B: This flag indicates the analyte was analyzed for and the reported value was obtained from a reading that was less than theContract Required Detection Limit (CRDL) but .greater than or equal to the Instrument Detection Limit (IDL).
The Q qualifiers used are:
E: This flag indicates an estimated value. This flag is used:
1. When the serial dilution (a five fold dilution for CLP and a five fold dilution for SW-846 method 601 OB) results arenot within 10%. The analyte concentration must be sufficiently high (minimally a factor of SOX above the IDL inthe original sample).
2. When the analytical spike recovery associated with the sample is below 40% after two successive dilutions byGraphite Furnace Atomic Absorption (GFAA).
M: This flag applies to GFAA analyses for concentrations greater than the Contract RequiredDetection Limit (CRDL). This flag is only used for GFAA if the analytical sample or analyticalspike duplicate injection reading is not within 20% of the Relative Standard Deviation (RSD).
N: This flag indicates the sample spike recovery is outside of control limits:
*: This flag is used for duplicate analysis when the sample and the sample duplicate results are notwithin control limits.
S: This flag applies to GFAA analyses to indicate the reported value was determined by theMethod Of Standard Addition (MSA).
\V: This flag applies to GFAA analyses when the post-digestion spike (analytical spike) is out of control limits (85% -115%),while sample absorbance is less than 50% of "spike" absorbance ["spike" is defined as (absorbance or concentration ofspike sample) minus (absorbance or concentration of the sample)].
+; This flag applies to GFAA analyses when the correlation coefficient for the MSA is less than 0.995 after two MSAanalyses.
NOTE: Entering "S", "W", or"+" is mutually exclusive. No combination of these qualifiers can appear in the same field for ananalyte.
The extensions: D, S, SD, L. A, added to the end of the client ID represent as follows:D: matrix duplicateS: matrix spikeSD: matrix spike duplicateL: serial dilution ,A: post digestion spike
Method Codes:P: ICP PLASMACV: MERCURY COLD VAPOR AACA MIDI-DISTILLATION SPECTROPHOTOMETRIC >] nF: FURNACE AA -L *J
U. S. EPA - CLPCOVER PAGE - INORGANIC ANALYSES DATA PACKAGE
Lab Name: COMPUCHEM Contract: 68W00082
Lab Code: LIBRTY Case No. : 30647 SAS No. : SDG No. : MC0035
SOW No.: ILM04.1
EPA Sample No. Lab Sample ID.
MC0035 MC0035-1MC0141 MC0035-2MC0142 MC0035-3MC0184 MC0035-4MC0185 MC0035-5
Were ICP interelement corrections applied? Yes/No YES
Were ICP background corrections applied? : Yes/No
If yes-were raw data generated beforeapplication of background corrections? Yes/No NO
Comments:
I certify that this data package is in compliance with the terms and conditions of thecontract, both technically and for completeness, for other than the conditions detailedabove. Release of the data contained in this hardcopy data package and in thecomputer-readable data submitted on diskette has been authorized by the Laboratory Manager orthe Manager's designee, as verified by'the following signature.
Signature: (Lj&vK jiia^S? (j^e££J~ Name: . feWVeS. W
Date: // _ 7 / / (f Id 2 _ Title: "Se VN \C> r
COVER PAGE - IN ILM04.1
CompuChema Division of Liberty Analytical Corp.'501 Madison Avenue Gary, NC 27513
SDG NARRATIVECASE # 30647 SDG # MC0035
CONTRACT # 68W00082
The indicated Sample Delivery Group (SDG) consisting of five (5) water samples was received into thelaboratory information management system (LIMS) on June 26,29, and July 2, 2002 intact and in goodcondition with Chain of Custody (COC) Records in order, unless otherwise noted in any attachments orQuality Assurance Notices. The temperature of the samples received on June 26, 2002 was 7.1°C. Thetemperature of the samples received on June 29,2002 was 3°C. The temperature of the samples received onJuly 2, 2002 was 8°C. Cooler temperature indicator bottles were present with all shipments.
Sample MC0185 is listed on the Traffic Report as TM/CN. It appears that the Sampler crossed out the tagnumber for the Cyanide fraction. The Laboratory only received a TM fraction for this sample, and onlyreported results for TAL metals.
All samples in this SDG are identified on the Traffic Report as Field QC. No matrix related QC sampleswere analyzed.
The samples were analyzed, in accordance with EPA CLP Statement of Work (SOW) document ILM04.1for the complete Inorganic Target Analyte List (TAL).
The correlation coefficient for the mercury and cyanide analytical runs are confirmed to be > 0.9950.
EQUATIONS FOR LIQUID SAMPLE CALCULATIONS:
Equation for obtaining metals sample results in ug/L as presented on FORM I data sheets from ICPinstrument acquired results in |ig/L (ppb).
C x F
1
Where
C = concentration (ug/L)
F = final volume in liters after sample preparation
I = initial volume in liters
Example: Aluminum result in ug/L
30.92848 ug/L (C) x 0.05 L (F)-- = 30.92848 ug/L reported as 30.9 ug/L0.05 L (I)
Equation for obtaining cyanide sample results in ug/L as presented on FORM I data sheets from instrumentacquired results in ug/L (ppb).
C x F x D
I
Where
C = concentration (ug/L) CN
F = final volume
D = dilution factor to bring sample into analysis range
I = initial volume in liters
Example: cyanide result in ug/L
0.390252 ug/L (C) x 1 (D) x 0.05 L (F)= 0.390252 ug/L reported as 0.60 ug/L *
0.05 L (F)
Equation for obtaining mercury sample results in ug/L as presented on FORM I data sheets frominstrument acquired results in ug/L (ppb).
C x D x F
I
Where
C = concentration (ug/L) Hg
D = dilution factor to bring sample into analysis range
F = final volume in liters (0.1 L)
1 = initial volume in liters
Example: Mercury result in ug/L
0.0882 ug/L (C) x 1 (D) x 0.1 (F)= 0.0882 ug/L reported as 0.10 ug/L *
* This result reported down to the IDL.
SAMPLE IDs:The following customer IDs are associated with this SDG:MC0035 MC0141 MC0142 MC0184 MC0185
INSTRUMENTAL QUALITY CONTROL:
All calibration verification solutions (ICV & CCV), blanks (IGB, & CCB), and interference check samples(1CSA & ICSAB) associated with this data were confirmed to be within EPA CLP allowable limits.
•\
SAMPLE PREPARATION QUALITY CONTROL:
The sample preparation procedure verifications (LCSW & PBW) were found to be within acceptableranges and all field samples were prepared and analyzed within the contract specified holding times.
The laboratory manager or his designee, as verified by the following signature has authorized release of thedata contained in this hard copy data package.
mes E. Medlinenior Chemist
July 16,2002
Page 1 of 1
Melissa Stevens
From: Melissa Stevens <[email protected]>To: Holly Rogers <[email protected]>Sent: Tuesday, July 16, 2002 4:02 PMAttach: 30647-071602.pdfSubject: 30647Hi Holly,
I forgot to send you an e-mail about this. Sample MC0185 is listed as TM/CN, but we, only received TM. If youtake a look at the traffic report the sampler marked the CN tag number out, but did not mark the CN off from theanalysis colume. Please see attachment.
Melissa Stevens•EPA Coordinator(919)379-4081CompuChem a division of Liberty [email protected]
807/16/02
U. S. EPA - CLPCOVER PAGE - INORGANIC ANALYSES DATA PACKAGE
Lab Name: COMPUCHEM
Lab Code: LIBRTY Case No.: 30647
SOW No.: ILM04.1
Contract: 68W00082
SAS No.: SDG No.: MC0069
EPA Sample No.
MC0069MC0070MC0071MC0072MC0073MC0073DMC0073SMC0074MC0075MC0076MC0077MC0079MC0080MC0081MC0082MC0083MC0084MC0085MC0086MC0087MC0088
Were ICP interelement corrections applied?
Were ICP background corrections applied?
If yes-were raw data generated beforeapplication of background corrections?
Lab Sample ID.
MC0069-1MC0069-2MC0069-3MC0069-4MC0069-5WG18532-2WG18532-1MC0069-6MC0069-7MC0069-8MC0069-9MC0069-10MC0069-11MC0069-12MC0069-13MC0069-14MC0069-15MC0069-16MC0069-17MC0069-18MC0069-19
Yes/No
Yes/No
Yes/No NO
Comments:
I certify that this data package is in compliance with the terms and conditions of thecontract, both technically and for completeness, for other than the conditions detailedabove. Release of the data contained in this hardcopy data package and in thecomputer-readable data submitted on diskette has been authorized by the Laboratory Manager orthe Manager's designee, as verified by the following signature.
Signature:. K-
Date: iJijt / b,
Name:
Title: \) \AJ-t l\ 4 )
•COVER PAGE - IN ILM04.1
U. S. EPA - CLP
COVER PAGE - INORGANIC ANALYSES DATA PACKAGE
Lab Name: COMPUCHEM Contract: 68W00082
Lab Code: LIBRTY Case No.: 30647 SAS No.: SDG No.: MC0069
SOW No.: ILM04.1
EPA Sample No. Lab Sample ID.
MC0089 . MC0069-20
Here ICP interelement corrections applied? Yes/No YES
Were ICP background corrections applied? Yes/No YESIf yes-were raw data generated beforeapplication of background corrections? Yes/No NO
Comments:
I certify that this data package is in compliance with the terms and conditions of thecontract, both technically and for completeness, for other than the conditions detailedabove. Release of the data contained in this hardcopy data package and in thecomputer-readable data submitted on diskette has been authorized by the Laboratory Manager orthe Manager's-designee, as verified by the following signature.
Signature.:_ jksMo L Kr • ( JJj2— Name: I /Vl U/LS ./H
Date: JltiL, ' *> . /7*OQ<s*- Title:
COVER PAGE - IN ILM04.1
CompuChema Division of Liberty Analytical Corp.501 Madison Avenue Gary, NC 27513
SDG NARRATIVECASE # 30647 SDG # MC0069
CONTRACT # 68W00082
The indicated Sample Delivery Group (SDG) consisting of twenty (20) soil samples was received into thelaboratory information management system (LIMS) on June 29, 2002; intact and in good condition with
• Chains of Custody (COC) Records in order, unless otherwise noted in any attachments or QualityAssurance Notices. Sample ID's reported in this data package are noted by the receiving department on theCOC if they differ from those listed by the samplers on the COC.
The samples were analyzed, in accordance with EPA - CLP Statement of Work (SOW) document ILM04.1for CLP TAL total metals and cyanide.
The correlation coefficients for the mercury and cyanide analytical runs are confirmed to be > 0.9950.
The cooler temperature bottle was present with samples received on June 29, 2002; and sampletemperature was 3.0 degrees Celsius.
The collection time is missing from the Traffic Report for sample MCOOS7. Per Region 3, the sample wasanalyzed.
EQUATIONS FOR SOLID SAMPLE CALCULATIONS:
Client sample MC0073 is used for illustration.
Any sample result that is < the instrument detection limit (IDL) will be entered at the IDL for thatanalyte.
ICP Equation:
Equation for obtaining metals sample results in mg/Kg as presented on FORM I data sheets from ICPinstrument acquired results in ug/L (ppb).
C x D x VConcentration (% solids) (mg/Kg)
W x SWhere
C = concentration (ug/L) ,D = dilution factorV = final volume in liters after sample preparationW = weight in grams of wet sampleS = %solids/100
Example: aluminum result ug/L to mg/Kg.28361.53 ug/L (C) x 1 (D) x 0.2 L (V)
=6178.98 mg/Kg reported as 61 SO mg/Kg1.0 g(W) x 0.918 (S)
Mercury Equation:
Equation for obtaining mercury sample results in mg/Kg as presented on FORM I data sheets frominstrument acquired results in ug/L (ppb).
A x D x F
B x EWhere
A = ug/L HgB = wet weight of sampleD = dilution factor to bring sample into analysis range •E = % solids/100
. F = final volume in liters (0.1 L)Example: mercury result ug/L to mg/Kg0.10 ug/L* (A) x 1(D) x 0.1 (F)
= 0.05447 mg/Kg reported as 0.054 mg/Kg*0.2 g(B) x 0.918 (E)
* The result is reported down to the instrument detection limit.
Cyanide Equation:
Equation for obtaining cyanide sample results in mg/Kg as presented on FORM I data sheets frominstrument acquired results in ug/L (ppb).
A x D x F
B x EWhere
A = ug/LCN 'B = wet weight of sampleD = dilution factor to bring sample into analysis range
• E = % solids/100F = final volume in liters (0 05 L)
Example: cyanide result ug/L to mg/Kg1.204136 ug/L (A) x 1 (D) x 0.05 L (F)
= 0.06558 mg/Kg reported as 0.066 mg/Kgl.OOg(B) x 0.918 (E)
SAMPLE IDs:
The following customer IDs are associated with this SDG:
MC0069 MC0070 MC0071 MC0072 MC0073 MC0074
MC0075 MC0076 MC0077 MC0079 MC0080 MC0081
MC0082 MC0083 MC0084 MC0085 MC0086 MC0087
MC0088 MC0089
INSTRUMENTAL QUALITY CONTROL:
All calibration verification solutions (ICV & CCV), blanks (ICB, & CCB), and interference check samples(ICSA & ICSAB) associated With this data were confirmed to be within EPA CLP allowable limits.
SAMPLE PREPARATION QUALITY CONTROL:
The sample preparation procedure verifications (LCSS & PBS) were found to be within acceptable rangesand all field samples were prepared and analyzed within the contract specified holding times.
MATRIX RELATED QUALITY CONTROL:
The sample matrix spike, CCN = WG18532-1 (MC0073S) was found to be outside CLP control limits forantimony, manganese, mercury, and thallium. The reported concentrations for these analytes are flaggedwith an "N" on all associated Form 1 and on Form 5a.
An "N" indicates a matrix-related interference in the sample preparation procedure &/or analysis for theflagged analyte. This is normally the consequence of a relatively high anionic content in the sample or (forsome sediments) an inconsistent sample matrix relative to that analyte.
CLP control limits for matrix spike recoveries are set at 75% to 125% of the analyte quantity added unlessoriginal sample concentrations exceed the true values of these "spikes" by a factor of four or more. In thiscase, affected analytes are not flagged even if recoveries are outside percentage recovery control limits.
Post-digestion spikes are mandatory for analytes demonstrating unsatisfactory matrix spike recoveriesduring ICP analysis (excluding silver). The results of such spikes are presented on Form 5b.
Unsatisfactory recovery of post-digestion spikes of this type do not have bearing upon the aforementioned"N" flags, but may indicate interference during analysis &/or a solution matrix which is hostile to theanalyte in question.
Satisfactory recovery of an analyte in a post-digestion spike of this type implies interference by therequired preparation procedure or in the sample matrix itself. Lack of uniformity for an analyte insediments will also result in satisfactory recovery of post-digestion spikes after failure in the related matrixspike.
The sample matrix duplicate, CCN = WG 18532-2 (MC0073D) was outside CLP control limits for arsenic.The reported concentration for this analyte is flagged with a "*" on all associated Form 1 and on Form 6.
A "*" indicates a non-homogeneous sample matrix in regard to the flagged analyte. This is normally theconsequence of a relatively coarse texture or of a mixed-matrix in sediment samples.
was inside CLP control limits for the requested analytes.
CLP control limits for duplicate determinations are +/- 20% Relative Percent Difference (RPD) forconcentrations greater than or equal to five times the CRDL in both the original and duplicate samples, and+/- the CRDL for concentrations less than five times the CRDL. The RPD is not calculated if both theoriginal and duplicate values fall below the IDL.
A five-fold serial dilution of sample, CCN = MC0069-5 (MC0073L) was performed in accordance withCLP requirements for ICP analysis.
The adjusted sample concentrations were inside CLP control limits for the requested analytes.
7
CLP control limits for serial dilution are defined as a deviation less than or equal to 10% in the dilution-adjusted concentrations from the original values for all analyte concentrations with values greater thanfifty (50) times their respective Instrument Detection Limit (IDL) in the original sample.
The laboratory manager or his.designee, as verified by the following signature has authorized release of thedata contained in this hard copy data package.
Thomas R. ColeData Reviewer IIJuly 16, 2002
8
CompuChema Division of Liberty Analytical Corp.501 Madison Avenue Cary.NC 27513
DATA .REPORTING QUALIFIERS FOR INORGANICS
On Form I, under the column labeled "C" for concentration qualifier and "Q" for qualifier, each result is flagged with the specific datareporting qualifiers listed below, as appropriate. Up to five qualifiers may be reported on Form I for each analyte.
The C (concentration) qualifiers used are:
U: This flag indicates the analyte was analyzed for but not detected. This reported value was obtained from a reading thatwas less than the Instrument Detection Limit (IDL). The IDL will be adjusted to reflect any dilution and. for soils, the
percent moisture.
B: This flag indicates the analyte was analyzed for and the reported value was obtained from a reading that was less than theContract Required Detection Limit (CRDL) but greater than or equal to the Instrument Detection Limit (IDL).
The Q qualifiers used are:
E: This flag indicates an estimated value. This flag is used:
1. When the serial dilution (a five fold dilution for CLP and a five fold dilution for SW-S46 method 601 OB) results arenot within 10%. The analyte concentration must be sufficiently high (minimally a factor of SOX above the IDL inthe original sample).
2. When the analytical spike recovery associated with the sample is below 40% after two successive dilutions byGraphite Furnace Atomic Absorption (GFAA).
M: This flag applies to GFAA analyses for concentrations greater than the Contract RequiredDetection Limit (CRDL). This flag is only used for GFAA if the analytical sample or analyticalspike duplicate injection reading is not within 20% of the Relative Standard Deviation (RSD).
N: This flag indicates the sample spike recovery is outside of control limits:
*: This flag is used for duplicate analysis when the sample and the sample duplicate results are not ,within control limits.
S: This flag applies to GFAA analyses to indicate the reported value was determined by theMethod Of Standard Addition (MSA).
\V: This flag applies to GFAA analyses when the post-digestion spike (analytical spike) is out of control limits (85% - 115%),while sample absorbance is less than 50% of "spike" absorbance ["spike" is defined as (absorbance or concentration ofspike sample) minus (absorbance or concentration of the sample)]. "
+: This flag applies to GFAA analyses when the correlation coefficient for the MSA is less than 0.995 after two MSAanalyses.
NOTE: Entering "S", "W", or"+" is mutually exclusive. No combination of these qualifiers can appear in the same field for ananalyte.
The extensions: D, S, SD, L. A, added to the end of the client ID represent as follows:D: matrix duplicateS: matrix spikeSD: matrix spike duplicateL: serial dilutionA: post digestion spike
Method Codes:P: ICP PLASMACV. MERCURY COLD VAPOR AACA: MIDI-DISTILLATION SPECTROPHOTOMETRIC (
F. FURNACE AA
U. S. EPA - CLPCOVER PAGE - INORGANIC ANALYSES DATA PACKAGE
Lab Name:
Lab Code:
COMPUCHEM
LIBRTY Case No.: 30647
SOW No.: JLM04.1
Con tract: 68W00082
SAS No.: SDG No.: MC0078
EPA Sample No.
MC0078MC0078DMC0078SMC0090MC0091MC0092MC0093MC0094MC0095MC0096MC0097MC0098MC0099MC0100MC0101MC0102MC0103MC0104MC0105MC0106MC0107
Were ICP interelement corrections applied?
Were ICP background corrections applied?If yes-were raw data generated beforeapplication of background corrections?
Lab Sample ID.
MC0078-14WG18530-2WG18530-1MC0078-15MC0078-16MC0078-17MC0078-18MC0078-19MC0078-20MC0078-21MC0078-22MC0078-23MC0078-24MC0078-25MC0078-26MC0078-27MC0078-28MC0078-29MC0078-30MC0078-31MC0078-32
Yes/No
Yes/No YES
Yes/No NO
Comments:
I certify that this data package is in compliance with the terms and conditions of thecontract, both technically and for completeness, for other than the conditions detailedabove. Release of the data contained in this hardcopy data package and in thecomputer-readable data submitted on diskette has been authorized by the Laboratory -Manager orthe Manager's designee, as verified by the following signature.
Signature:
Date:
Name:
Title:
COVER PAGE - IN ILM04.1
U.S. EPA-CLPCOVER PAGE - INORGANIC ANALYSES DATA PACKAGE
•Lab Name: COMPUCHEM Contract: 68W00082
Lab Code: LIBRTY Case No.: 30647 SAS No.: SDG No. : MC0078
SOW No.: ILM04.1
EPA Sample No. Lab Sample ID.
MC0108 MC0078-33
Were ICP interelement corrections applied? Yes/No
Were ICP background corrections applied? \ Yes/NoIf yes-were raw data generated beforeapplication of background corrections? Yes/No NO
Comments:
I certify that this data package is in compliance with the terras and conditions of thecontract, both technically and for completeness, for other than the conditions detailedabove. Release of the data contained in this hardcopy data package and in thecomputer-readable data submitted on diskette has been authorized by the Laboratory Manager orthe Manager's designee, as verified by the following signature.
Yl g -JSignature : ( M&yY &l ^g-J^ Name :
>
Date: // 7 / / g'/dZ- _ Title:
COVER PAGE - IN ILM04.1
CompuChema Division of Liberty Analytical Corp.501 Madison Avenue Cary.NC 27513
SDG NARRATIVECASE # 30647 SDG # MC0078
CONTRACT # 68W00082
The indicated Sample Delivery Group (SDG) consisting of twenty (20) soil samples was received into thelaboratory information management system (LIMS) on June 29,2002 intact and in good condition withChain of Custody (COC) Records in order, unless otherwise noted in any attachments or Quality AssuranceNotices. The temperature of the samples upon receipt was 3°C, as determined from the cooler temperatureindicator bottle.
The samples were analyzed, in accordance with EPA CLP Statement of Work (SOW) document ILM04.1,for the complete Inorganic Target Analyte List (TAL).
The correlation coefficient for the mercury and cyanide analytical runs are confirmed to be > 0.9950.
EQUATIONS FOR SOLED SAMPLE CALCULATIONS:
Equation for obtaining metals sample results in mg/kg as presented on FORM I data sheets from ICPinstrument acquired results in ug/L (ppb).
C x V
W x S
Where
C = concentration (ug/L)
V = final volume in liters after sample preparation
W = weight in grams of wet sample
S = % solids/100
Example: aluminum result ug/1 to mg/kg.
30976.51 ug/L(C) x 0.2 L(V)
l.Og(W) x 0.890 (S)= 6961.013 mg/kg reported as 6960 mg/kg
Equation for obtaining cyanide sample results in mg/kg as presented on FORM I data sheets frominstrument acquired results in ug/LXppb).
C x D x V
W x S
Where
C = concentration of cyanide (ug/L)
W = wet weight of sample
D = dilution factor to bring sample into analysis range
S = % solids/100
V = final volume in liters
Example: cyanide result ug/L to mg/kg
1.399607 ug/L (C) x 1 (D) x 0.05 L (V)
l.Og(W) x 0.890 (S)= 0.07863 mg/kg reported as 0.079 mg/kg
' Equation for obtaining mercury sample results in mg/kg as presented on FORM 1 data sheets frominstrument acquired results in ug/L (ppb). .
C x D x V
W x S
Where
C = concentration (ug/L)
W = wet weight of sample
D = dilution factor to bring sample into analysis range
S = %solids/100
V = final volume in liters
Example: mercury result ug/L to mg/kg
0.0165 ug/L(C) x 1 (D) x 0.1 L (V)= 0.0093 mg/kg reported as 0.056 mg/kg *
0.2 g (W) x 0.890 (S)
* This result reported down to the IDL. f
SAMPLE IDs:The following customer IDs are associated with this SDG:MC0078 MC0090 MC0091 MC0092 MC0093 MC0094 MC0095 MC0096 MC0097MC0098 MC0099 MC0100 MC0101 MC0102 MC0103 MC0104 MC0105 MC0106MC0107 MC0108
INSTRUMENTAL QUALITY CONTROL:
All calibration verification solutions (ICV & CCV), blanks (ICB, & CCB), and interference check samples(ICSA & ICSAB) associated with this data were confirmed to be within EPA CLP allowable limits.
SAMPLE PREPARATION QUALITY CONTROL:
The sample preparation procedure verifications (LCSS & PBS) were found to be within acceptable rangesand all field samples were prepared and analyzed within the contract specified holding times.
MATRIX RELATED QUALITY CONTROL:
The sample matrix spike, CCN = WG18530-1 (MC0078S) was found to be outside CLP control limits forAntimony, Manganese and Thallium.
CLP control limits for matrix spike recoveries are set at 75% to 125% of the analyte quantity added unlessoriginal sample concentrations exceed the true values of these "spikes" by a factor of four or more. In thiscase, affected analytes are not flagged even if recoveries are outside percentage recovery control limits.
The sample matrix duplicate, CCN = WG18530-2 (MC0078D) was found to be inside CLP control limitsfor the requested analytes.
CLP control limits for duplicate determinations are +/- 20% Relative Percent Difference (RPD) forconcentrations greater than or equal to five times the CRDL in both the original and duplicate samples, and+/- the CRDL for concentrations less than five times the CRDL. The RPD is not calculated if both theoriginal and duplicate values fall below the IDL.
A five-fold serial dilution of sample, CCN = SDIMC0078-1 (MC0078L) was performed in accordancewith CLP requirements for 1CP analysis.
The adjusted sample concentrations were inside CLP control limits for the requested analytes.
CLP .control limits for serial dilution are defined as a deviation less than or equal to 10% in the dilutionadjusted concentrations from the original values for all analyte concentrations greater than fifty (50) timestheir respective Instrument Detection Limit (IDL) in the original sample.
The laboratory manager or his designee, as verified by the following signature has authorized release of thedata contained in this hard copy data package.
James E. MedlinSenior ChemistJuly 16,2002
8
U. S. EPA - CLPCOVER PAGE - INORGANIC ANALYSES DATA PACKAGE
Lab Name: COMPUCHEM
Lab Code: LIBRTY Case No.: 30647
SOW No. : ILM04.1
EPA Sample No.
MC0109MC0110MC0111MC0112MC0113MC0114MC0115MC0116MC0117MCOH8MC0119MC0120MC0121MC0122MC0123MC0124MC0125MC0126MC0127MC0131MC0131D
Were ICP interelement corrections applied?
Were ICP background corrections applied?If yes-were raw data generated beforeapplication of background corrections?
Contract: 68W00082
SAS No.:
Lab Sj""ple ID.
MC0109-1MC0109-2MC0109-3MC0109-4MC0109-5MC0109-6MC0109-7MC0109-8MC0109-9MC0109-10MC0109-11MC0109-12MC0109-13MC0109-14MC0109-15MC0109-16MC0109-17MC0109-18MC0109-19MC0109-20WG18531-2
SDG No. : MC0109
Yes/No YES
Yes/No YES
Yes/No NO
Comments: THE FOLLOWING ANALYTES HAVE BEEN FLAGGED WITH AN "E" TO INDICATE SERIALnTT.ITTTON RESULTS WHICH ARE NOT WTTHIN CONTROL LIMITS:MAGNESIUM . _
I certify that this data package is in compliance with the terms and conditions of thecontract, both technically and for completeness, for other than the conditions detailedabove. Release of the data contained in this hardcopy data package and in the computer-readable datasubmitted on diskette has been authorized by the Laboratory Manager or the Manager's designee, asverified by the following signature.
Signatur
Date:
Name:
Title:
COVER PAGE - IN
IN&it.
1L 3
ILM04.1
U. S. EPA - CLPCOVER PAGE - INORGANIC ANALYSES DATA PACKAGE
Lab Name: COMPUCHEM Contract: 68W00082
Lab Code: LIBRTY Case No.: 30647 SAS No.: SDG No.: MC0109
SOW No. : ILM04.1
EPA Sample No. Lab Sample ID.
MC0131S WG18531-1
Were ICP interelement corrections 'applied? Yes/No YES
Were ICP background corrections applied? ' Yes/No YESIf yes-were raw data generated beforeapplication of background corrections? Yes/No NO
Comments: THE FOLLOWING ANALYTES HAVE BEEN FLAGGED WITH AN "E" TO INDICATE SERIALDTT.1TTTON RESULTS WHICH ARE NOT WTTHTN CONTROL T.TMTTS; ._
I certify that this data package is in compliance with the terms and conditions of thecontract, both technically and for completeness, for other than the conditions detailedabove. Release of the data contained in this hardcopy data package and in the computer-readable datasubmitted on diskette has been authorized by the Laboratory Manager or the Manager's designee, asverified by the following signature.
&• -Signatur^^/A^-ViMA**- **• - \_0\$_ Name:
Date: I / < A - / V , 1.5, d-Cfl&t Title: Uwf-" J\^£AJUJ^-^\. \{ ~f.Q I y
COVER PAGE - IN ILM04.1
CompuChema Division of Liberty Analytical Corp.501 Madison Avenue Cary.NC 27513
SDG NARRATIVECASE # 30647 SDG # MC0109
CONTRACT # 68W00082
The indicated Sample Delivery Group (SDG) consisting of twenty (20) soil samples was received into thelaboratory information management system (LIMS) on June 29,2002; intact and in good condition withChains of Custody (COC) Records in order, unless otherwise noted in any attachments or QualityAssurance Notices. Sample ID's reported in this data package are noted by the receiving department on theCOC if they differ from those listed by the samplers on the COC.
The samples were analyzed, in accordance with EPA - CLP Statement of Work (SOW) document ILM04.1for CLP TAL total metals and cyanide.
The correlation coefficients for the mercury and cyanide analytical runs are confirmed to be > 0.9950.
The cooler temperature bottle was present with samples received on June 29,2002; and sampletemperature was 3.0 degrees Celsius.
The Laboratory Control Sample (LCS) for sodium analyzed outside the control limits established for thatanalyte. Sodium is present in the LCS below the CRDL. Thus, the control limits are only advisory limits.
EQUATIONS FOR SOLID SAMPLE CALCULATIONS:
Client sample MC0131 is used for illustration.
Any sample result that is < the instrument detection limit (IDL) will be entered at the IDL for thatanalyte.
ICP Equation:
Equation for obtaining metals sample results in ing/Kg as presented on FORM I data sheets from ICPinstrument acquired results in ug/L (ppb).
C x D x VConcentration (% solids) (mg/Kg)
. W x SWhere
C = concentration (ug/L)D = dilution factorV = final volume in liters after sample preparationW = weight in grams of wet sampleS = %solids/100
Example: aluminum result ug/L to mg/Kg.41422.58 ug/L (C) x 1 (D) x 0.2 L(V)
=9511.5 mg/Kg reported as 9510 mg/Kgl.Og(W) x 0.«71(S)
Mercury Equation:
Equation for obtaining mercury sample results in mg/Kg as presented on FORM I data sheets frominstrument acquired results in ug/L (ppb).
A x D x F
B x EWhere
A = ug/L HgB = wet weight of sampleD = dilution factor to bring sample into analysis rangeE = %solids/100F = final volume in liters (0.1 L)
Example: mercury result ug/L to mg/Kg0.10 ug/L* (A) x 1(D) x 0.1 (F)
= 0.0574 mg/Kg reported as 0.057 mg/Kg*0.2 g(B) x 0.871(E)
* The result is reported down to the instrument detection limit.
Cyanide Equation:
Equation for obtaining cyanide sample results in mg/Kg as presented on FORM I data sheets frominstrument acquired results in ug/L (ppb).
A x D x F
B x EWhere
A = ug/L CNB = wet weight of sampleD = dilution factor to bring sample into analysis rangeE = % solids/100 ''F = final volume in liters (0 05 L)
Example: cyanide result ug/L to mg/Kg0.656435 ug/L (A) x 1 (D) x 0.05 L (F)
= 0.03768 mg/Kg reported as 0.038 mg/Kgl.OOg(B) x 0.871(E)
SAMPLE IDs:
The following customer IDs are associated with this SDG:
MC0109 MC0110 MC0111 MC0112 MC0113 MC0114
MC0115 MC0116 MC0117 MC0113 MC0119 MC0120
MC0121 MC0122 MC0123 MC0124 MC0125 MC0126V
MC0127 MC0131
7
INSTRUMENTAL QUALITY CONTROL:
All calibration verification solutions (ICV & CCV), blanks (ICB, & CCB), and interference check samples(ICSA & ICSAB) associated with this data were confirmed to be within EPA CLP allowable limits.
SAMPLE PREPARATION QUALITY CONTROL:
The sample preparation procedure verifications (LCSS & PBS) were found to be within acceptable rangesand all field samples were prepared and analyzed within the contract specified holding times.
MATRIX RELATED QUALITY CONTROL:
The sample matrix spike, CCN = WG18531-1 (MC0131S) was found to be outside CLP control limits forantimony and lead. The reported concentrations for these analytes are flagged with an "N" on allassociated Form 1 and on Form 5a.
An "N" indicates a matrix-related interference in the sample preparation procedure &/or analysis for theflagged analyte. This is normally the consequence of a relatively high anionic content in the sample or (forsome sediments) an inconsistent sample matrix relative to that analyte.
CLP control limits for matrix spike recoveries are set at 75% to 125% of the analyte quantity added unlessoriginal sample concentrations exceed the true values of these "spikes" by a factor of four or more. In thiscase, affected analytes are not flagged even if recoveries are outside percentage recovery control limits.
Post-digestion spikes are mandatory for analytes demonstrating unsatisfactory matrix spike recoveriesduring ICP analysis (excluding silver). The results of such spikes are presented on Form 5b.
Unsatisfactory recovery of post-digestion spikes of this type do not have bearing upon the aforementioned"N" flags, but may indicate interference during analysis &/or a solution matrix which is hostile to theanalyte in question.
Satisfactory recovery of an analyte in a post-digestion spike of this type implies interference by therequired preparation procedure or in the sample matrix itself. Lack of uniformity for an analyte insediments will also result in satisfactory recovery of post-digestion spikes after failure in the related matrixspike.
The sample matrix duplicate, CCN = WG 18531-2 (MC0131D) was inside CLP control limits for therequested analytes.
CLP control limits for duplicate determinations are +/- 20% Relative Percent Difference (RPD) forconcentrations greater than or equal to five times the CRDL in both the original and duplicate samples, and+/- the CRDL for concentrations less than five times the CRDL. The RPD is not calculated if both theoriginal and duplicate values fall below the IDL.
A five-fold serial dilution of sample, CCN = MCO109-20 (MC0131L) was performed in accordance withCLP requirements for ICP analysis.
The adjusted sample concentrations were outside CLP control limits for magnesium, which is flagged withan "E" on all associated Form 1, the Cover Page and Form 9.
An "E" indicates that a chemical or physical interference effect was encountered during the analysis of theflagged analyte. As a result of this interference, all values for the analyte in the same matrix must beconsidered to be estimated quantities.
8
CLP control limits for serial dilution are defined as a deviation less than or equal to 10% in the dilution-adjusted concentrations from the original values for all analyte concentrations with values greater thanfifty (50) times their respective Instrument Detection Limit (IDL) in the original sample.
The laboratory manager or his designee, as verified by the following signature has authorized release of thedata contained in this hard copy data package.
omas R. ColeData Reviewer IIJuly 15, 2002
CompuChema Division of Liberty Analytical Corp.501 Madison Avenue Cary.NC 27513
DATA REPORTING QUALIFIERS FOR INORGANICS
On Form I, under the column labeled "C" for concentration qualifier and "Q" for qualifier, each result is flagged with the specific datareporting qualifiers listed below, as appropriate. Up to five qualifiers may be reported on Form I for each analyte.
The C (concentration) qualifiers used are:
U: This flag indicates the analyte was analyzed for but not detected. This reported value was obtained from a reading thatwas less than the Instrument Detection Limit (IDL). The IDL will be adjusted <o reflect any dilution and, for spils, the
percent moisture.
B: This flag indicates the analyte was analyzed for and the reported value was obtained from a reading that was less than theContract Required Detection Limit (CRDL) but greater than or equal to the Instrument Detection Limit (IDL).
The Q qualifiers used are:
E: This flag indicates an estimated value. This flag is used:
1. When the serial dilution (a five fold dilution for CLP and a five fold dilution for SW-846 method 601 OB) results arenot within 10%. The analyte concentration must be sufficiently high (minimally a factor of SOX above the IDL inthe original sample).
2. When the analytical spike recovery associated with the sample is belo\\ 40% after two successive dilutions byGraphite Furnace Atomic Absorption (GFAA).
M: This flag applies to GFAA analyses for concentrations greater than the Contract RequiredDetection Limit (CRDL). This flag is only used for GFAA if the analytical sample or analyticalspike duplicate injection reading is not within 20% of the Relative Standard Deviation (RSD).
N: This flag indicates the sample spike recovery is outside of control limits:
*: This flag is used for duplicate analysis when the sample and the sample duplicate results are not .within control limits.
S: This flag applies to GFAA analyses to indicate the reported value was determined by theMethod Of Standard Addition (MSA).
\V: This flag applies to GFAA analyses when the post-digestion spike (analytical spike) is out of control limits (85% - 115%),while sample absorbance is less than 50% of "spike" absorbance ["spike" is defined as (absorbance or concentration ofspike sample) minus (absorbance or concentration of the sample)].
+: This flag applies to GFAA analyses when the correlation coefficient for the MSA is less than 0.995 after two MSAanalyses.
NOTE: Entering "S", "W", or"+" is mutually exclusive. No combination of these qualifiers can appear in the same field for ananalyte.
The extensions: D, S, SD, L. A, added to the end of the client ID represent as follows:D: matrix duplicateS: matrix spikeSD: matrix spike duplicateL: serial dilutionA: post digestion spike
Method Codes:P: ICP PLASMACV: MERCURY COLD VAPOR AACA: MIDI-DISTILLATION SPECTROPHOTOMETR1CF: FURNACE AA 10
U. S. EPA - CLPCOVER PAGE - INORGANIC ANALYSES DATA PACKAGE
Lab Name: COMPUCHEM
Lab Code: LIBRTY Case No.: 30647
SOW No. : ILM04.1
Contract: 68W00082
SAS No.: SDG No. MC0128
EPA Sample No.
MC0128MC0128DMC0128SMC0129MC0130MC0132MC0133MC0134MC0135MC0136MC0137MC0138MC0139
Lab ID .
MC0128-1WG18589-2WG18589-1MC0128-2MC0128-3MC0128-4MC0128-5MC0128-6MC0128-7MC0128-8MC0128-9MC0128-10MC0128-11
Were ICP interelement corrections applied?
Were ICP background corrections applied?If yes-were raw data generated beforeapplication of background corrections?
Yes/No YES
'• Yes/No YES
Yes/No NO
Comments: THE FOLLOWING ANALYTES HAVE BEEN FLAGGED WITH AN "E" TO INDICATE SERIAL' nTT.TTTTQN TJF.SULTS WHTCH ARE NOT WITHIN CONTROL T.TMTTS:
ZiNC : =
I certify that this data package is in compliance with the terms and conditions of thecontract, both technically and for completeness, for other than the conditions detailedabove. Release of the data contained in this hardcopy data package and in the computer-readable datasubmitted on diskette has been authorized by the Laboratory Manager or the Manager's designee, asverified by the following signature.
Signature :r
Date:
I Name:
Title:
COVER PAGE - IN
/ AoTlAAS K - L
JAt/i, K £k>
ILM04.1
CompuChema Division of Liberty Analytical Corp.501 Madison Avenue Cary.NC 27513
SDG NARRATIVECASE # 30647 SDG # MC0128
CONTRACT # 68W00082
The indicated Sample Delivery Group (SDG) consisting of eleven (11) soil samples was received into thelaboratory information management system (LIMS) on June 29,2002; intact and in good condition withChains of Custody (COC) Records in order, unless otherwise noted in any attachments or QualityAssurance Notices. Sample ID's reported in this data package are noted by the receiving department on theCOC if they differ from those listed by the samplers on the COC.
The samples were analyzed, in accordance with EPA - CLP Statement of Work (SOW) document ILM04.1for CLP TAL total metals and cyanide.
The correlation coefficients for the mercury and cyanide analytical runs are confirmed to be > 0.9950.
The cooler temperature bottle was present with samplesTeceived on June 29, 2002; and sampletemperature was 3.0 degrees Celsius.
The sampler did not designate as sample for MS/MSD. LIBRTY selected sample MC0128 for QC.
The Laboratory Control Sample (LCS) for sodium analyzed outside the control limits established for thatanalyte. Sodium is present in the LCS below the CRDL. Thus, the control limits are only advisory limits.
EQUATIONS FOR SOLID SAMPLE CALCULATIONS:
Client sample MC0128 is used for illustration.
Any sample result that is < the instrument detection limit (IDL) will be entered at the IDL for thatanalyte.ICP Equation:Equation for obtaining metals sample results in mg/Kg as presented on FORM I data sheets from ICPinstrument acquired results in ug/L (ppb).
C x D x VConcentration (% solids) (mg/Kg)
W x SWhere
C = concentration (ug/L)D = dilution factorV = final volume in liters after sample preparationW = weight in grams of wet sampleS = %solids/100
Example: aluminum result ug/L to mg/Kg.34365,69 ug/L (C) x 1 (D) x 0.2 L (V)
= 7446.5 mg/Kg reported as 7450 mg/Kgl.Og(W) x 0.923(8)
Mercury Equation:
Equation for obtaining mercury sample results in mg/Kg as presented on fORM I data sheets frominstrument acquired results in ug/L (ppb).
A x D x F
B x EWhere
A = ug/L HgB = wet. weight of sampleD = dilution factor to bring sample into analysis rangeE = % sol ids/100F = final volume in liters (0.1 L)
Example: mercury result ug/L to mg/Kg0.1253 ug/L (A) x 1 (D) x 0.1 (F)
= 0.06788 mg/Kg reported as 0.068 mg/Kg0.2 g(B) x 0.923 (E)
Cyanide Equation:
Equation for obtaining cyanide sample results in mg/Kg as presented on FORM I data sheets frominstrument acquired results in ug/L (ppb).
A x D x F
B x EWhere
A = ug/L CNB = wet weight of sampleD = dilution factor to bring sample into analysis rangeE = % solids/100F = final volume in liters (0 05 L)
Example: cyanide result ug/L to mg/Kg0.60 ug/L* (A) x 1 (D) x 0.05 L (F)
= 0.0325027 mg/Kg reported as 0.033 mg/Kg*l.OOg(B) x 0.923 (E)
* The result is reported down to the instrument detection limit.
SAMPLE IDs:
The following customer IDs are associated with this SDG:
MCOI28 MC0129 MC0130 MC0132 MC0133 MC0134
MC0135 MC0136 MC0137 MC0138 MC0139
INSTRUMENTAL QUALITY CONTROL:
All calibration verification solutions (ICY & CCV), blanks (1CB, & GCB), and interference check samples(ICSA & ICSAB) associated with this data were-confirmed to be within EPA CLP allowable limits.
SAMPLE PREPARATION QUALITY CONTROL:
The sample preparation procedure verifications (LCSS & PBS) were found to be within acceptable rangesand all field samples were prepared and analyzed within the contract specified holding times.
MATRIX RELATED QUALITY CONTROL:
The sample matrix spike, CCN = WG18589-1 (MC0128S) was found to be outside CLP control limits forantimony and mercury. The reported concentrations for these analytes are flagged with an "N" on allassociated Form 1 and on Form 5a.
An "N" indicates a matrix-related interference in the sample preparation procedure &/or analysis for theflagged analyte. This is normally the consequence of a relatively high anionic content in the sample or (forsome sediments) an inconsistent sample matrix relative to that analyte.
CLP control limits for matrix spike recoveries are set at 75% to 125% of the analyte quantity added unlessoriginal sample concentrations exceed the true.values of these "spikes" by a factor of four or more. In thiscase, affected analytes are not flagged even if recoveries are outside percentage recovery control limits.
Post-digestion spikes are mandatory for analytes demonstrating unsatisfactory matrix spike recoveriesduring ICP analysis (excluding silver). The results of such spikes are presented on Form 5b.
Unsatisfactory recovery of post-digestion spikes of this type do not have bearing upon the aforementioned"N" flags, but may indicate interference during analysis &/or a solution matrix which is hostile to theanalyte in question.
jSatisfactory recovery of an analyte in a post-digestion spike of this type implies interference by therequired preparation procedure or in the sample matrix itself. Lack of uniformity for an analyte insediments will also result in satisfactory recovery of post-digestion spikes after failure in the related matrixspike.
The sample matrix duplicate, CCN = WG 18589-2 (MC0128D) was inside CLP control limits for therequested analytes.
CLP control limits for duplicate determinations are +/- 20% Relative Percent Difference (RPD) forconcentrations greater than or equal to five times the CRDL in both the original and duplicate samples, and+/- the CRDL for concentrations less than five times the CRDL. The RPD is not calculated if both theoriginal and duplicate values fall below the IDL.
A five-fold serial dilution of sample, CCN = MCO128-1 (MC0128L) was performed in accordance withCLP requirements for ICP analysis.
VThe adjusted sample concentrations were outside CLP control limits for zinc, which is flagged with an "E"on all associated Form 1, the Cover Page and Form 9.
An "E" indicates that a chemical or physical interference effect was encountered during the analysis of theflagged analyte. As a result of this interference, all values for the analyte in the same matrix must beconsidered to be estimated quantities.
CLP control limits for serial dilution are defined as a deviation less than or equal to 10% in the dilution-adjusted concentrations from the original values for all analyte concentrations with values greater thanfifty (50) times their respective Instrument Detection Limit (IDL) in the original sample.
7
The laboratory manager or his designee, as verified by the following signature has authorized release of thedata contained in this hard copy data package.
Thomas R. ColeData Reviewer IIJuly 12, 2002
8
CompuChema Division of Liberty Analytical Corp.501 Madison Avenue Cary.NC 27513
DATA.REPORTING QUALIFIERS FOR INORGANICS
On Form I, under the column labeled "C" for concentration qualifier and "Q" for qualifier, each result is flagged with the specific datareporting qualifiers listed below, as appropriate. Up to five qualifiers may be reported on Form I for each analyte.
The C (concentration) qualifiers used are;
U: This flag indicates the analyte was analyzed for but not detected. This reported value was obtained from a reading thatwas less than the Instrument Detection Limit (IDL). The IDL will be adjusted to reflect any dilution and, for soils, the
percent moisture.
B: This flag indicates the analyte was analyzed for and the reported value was obtained from a reading that was less than the "Contract Required Detection Limit <CRDL) but .greater than or equal to the Instrument Detection Limit (IDL).
The Q qualifiers used are:
E: This flag indicates an estimated value. This flag is used:
" 1. When the serial dilution (a five fold dilution for CLP and a five fold dilution for SXV-846 method 6010B) results arenot within 10%. The analyte concentration must be sufficiently high (minimally a factor of SOX above the IDL inthe original sample).
2. When the analytical spike recovery associated with the sample is below 40% after ruo successive dilutions byGraphite Furnace Atomic Absorption (GFAA).
M: This flag applies to GFAA analyses for concentrations greater than .the Contract RequiredDetection Limit (CRDL). This flag is only used forGFAA if the analytical sample or analyticalspike duplicate injection reading is not within 20% of the Relative Standard Deviation (RSD).
N: This flag indicates the sample spike recovery is outside of control limits:
*: This flag is used for duplicate analysis when the sample and the sample duplicate results are not:within control limits.
S: This flag applies to GFAA analyses to indicate the reported value was determined by theMethod Of Standard Addition (MSA).
W: This flag applies to GFAA analyses when the post-digestion spike (analytical spike) is out of control limits (85% -115%),while sample absorbance is less than 50% of "spike" absorbance ("spike" is defined as (absorbance or concentration ofspike sample) minus (absorbance or concentration of the sample)].
+; This flag applies to GFAA analyses when the correlation coefficient for the MSA is less than 0.995 after two MSAanalyses.
NOTE: Entering "S", "W", or"+" is mutually exclusive. No combination of these qualifiers can appear in the same field for ananalyte.
The extensions: D, S, SD, L. A, added to the end of the client ID represent as follows:D: matrix duplicateS: matrix spikeSD: matrix spike duplicateL: serial dilutionA: post digestion spike
Method Codes:P. ICP PLASMACV: MERCURY COLD VAPOR AA .,CA: MIDI-DISTILLATION SPECTROPHOTOMETRICF: FURNACE AA
U. S. EPA - CLPCOVER PAGE - INORGANIC ANALYSES DATA PACKAGE
Lab Name: COMPUCHEM
Lab Code: LIBRTY
SOW No.: ILM04.1
Case No.: 30647
Contract: 68W00082
SAS No.: SDG No.: MC0143
EPA Sample No.
MC0143MC0144MC0145MC0146MC0147MC0148MC0149MC0150MC0151MC01S2MC0152DMC0152SMC0154MC0155MC0156MC0157MC0158MC0159MC0160MC0161MC0162
Were ICP interelement corrections applied?
Were ICP background corrections applied?If.yes-were raw data generated beforeapplication of background corrections?
Lab Sample ID.
MC0143-1MC0143-2MC0143-3MC0143-4MC0143-5MC0143-6MC0143-7MC0143-8MC0143-9MC0143-10WG18575-2WG18575-1MC0143-11MC0143-12MC0143-13MC0143-14MC0143-15MC0143-16MC0143-17MC0143-18MC0143-19
Yes/No YES
Yes/No YES
Yes/No NO
Comments: THE FOLLOWING ANALYTES HAVE BEEN FLAGGED WITH AN "E" TO INDICATE SERIALDILUTION RESULTS WHICH ARE NOT WITHIN CONTROL LIMITS : ZINC.
I certify that this data package is in compliance with the terms and conditions of thecontract, both technically and for completeness, for other than the conditions detailedabove. Release of the data contained in this hardcopy data package and in thecomputer-readable data submitted on diskette has been authorized by the Laboratory Manager orthe Manager's designee, as verified by the following signature.
Signature:
Date:
Name:
Title:
COVER PAGE - IN ILM04.1
U. S. EPA - CLPCOVER PAGE - INORGANIC ANALYSES DATA PACKAGE
Lab Name: COMPUCHEM Contract: 68WO0082
Lab Code: LIBRTY Case No. : 30647 SAS No. : SDG No. : MC0143
SOW No.: ILM04.1
EPA Sample No. Lab Sample ID.
MC0163 MC0143-20
Were ICP interelement corrections applied? Yes/No
Were ICP background corrections applied? •• Yes/NoIf yes-were raw data generated beforeapplication of background corrections? Yes/No NO
Comments: THE FOLLOWING ANALYTES HAVE BEEN FLAGGED WITH AN "E" TO INDICATE SERIALDILUTION RESULTS WHICH ARE NOT WITHIN CONTROL LIMITS : ZINC.
I certify that this data package is in compliance with the terms and conditions of thecontract, both technically and for completeness , for other than the conditions detailedabove. Release of the data contained in this hardcopy data package and in thecomputer-readable data submitted on diskette has been authorized by the Laboratory Manager orthe Manager's designee, as verified by the following signature.
Signature: /^L^^^ Name: J^VY\-eS YY\&d\ln
Date:C
7/7*7 /<9<3 _ Title: S^n JQC
COVER PAGE - IN ILM04.1
CompuChema Division of Liberty Analytical Corp.501 Madison Avenue Cary.NC 27513
SDG NARRATIVECASE # 30647 SDG # MC0143
CONTRACT # 68W00082
The indicated Sample Delivery Group (SDG) consisting of twenty (20) soil samples was received into thelaboratory information management system (LIMS) on July 2, 2002 intact and in good condition withChain of Custody (COC) Records in order, unless otherwise noted in any attachments or Quality AssuranceNotices. The temperature of the samples upon receipt was 8°C, as determined from the cooler temperatureindicator bottle. '
The samples were analyzed, in accordance with EPA CLP Statement of Work (SOW) document ILM04.1,for the complete Inorganic Target Analyte List (TAL).
The correlation coefficient for the mercury and cyanide analytical runs are confirmed to be > 0.9950.
EQUATIONS FOR SOLDD SAMPLE CALCULATIONS:
Equation for obtaining metals sample results in mg/kg as presented on FORM I data sheets from ICPinstrument acquired results in ug/L (ppb).
C x V
W x S
Where
C = concentration (ug/L)
V = final volume in liters after sample preparation
W = weight in grams of wet sample
S = %solids/100
Example: aluminum result ug/1 to mg/kg.
42130.18 ug/L (C) x 0.2 L(V)= 9629.755 mg/kg reported as 9630 mg/kg
l.Og(W) x 0.875 (S)
Equation for obtaining cyanide sample results in mg/kg as presented on FORM I data sheets frominstrument acquired results in ug/L (ppb).
C x D x VV
W x S
Where '
C = concentration of cyanide (ug/L)
W = wet weight of sample
D = dilution factor to bring sample into analysis range
S = %solids/100
V = final volume in liters
Example: cyanide result ug/L to mg/kg
1.246421 ug/L (C) x 1 (D) x 0.05 L (V)= o.071224 mg/kg reported as 0.071 mg/kg
l .Og(W) x 0.875(8)
Equation for obtaining mercury sample results in mg/kg as presented on FORM I data sheets frominstrument acquired results in Ug/L (ppb).
C x D x V
W x S .
Where
C = concentration (ug/L)
W = wet weight of sample
D = dilution factor to bring sample into analysis range
S = % solids/100
V = final volume in liters
Example: mercury result ug/L to mg/kg
0.0892 ug/L(C) x 1 (D) x 0.1 L (V)= 0.0510 mg/kg reported as 0.057 mg/kg *
0.2 g (W) x 0.822 (S)
7This result reported down to<he IDL.
SAMPLE IDs:The following customer IDs are associated with this SDG:MC0143 MC0144 MC0145 MC0146 MC0147 MC0148 MC0149 MC0150 MC0151MC01S2 MC0154 MC01S5 MC01S6 MC0157 MCOI58 MC0159 MC0160 MC0161MC0162 MC0163
INSTRUMENTAL QUALITY CONTROL:
All calibration verification solutions (ICV & CCV), blanks (ICB, & CCB), and interference check samples(ICSA & ICSAB) associated with this data were confirmed to be within EPA CLP allowable limits.
SAMPLE PREPARATION QUALITY CONTROL:
The sample preparation procedure verifications (LCSS & PBS) were found to be within acceptable rangesand all field samples were prepared and analyzed within the contract specified holding times. The Sodiumresult for the LCSS is above the control'limit. The True Value for Sodium is below the CRDL and thecontrol limits are stated to be advisory only.
MATRIX RELATED QUALITY CONTROL:
The sample matrix spike, CCN = WG18575-1 (MC0152S) was found to be outside CLP control limits forAntimony, Manganese and Selenium.
CLP control limits for matrix spike recoveries are set at 75% to 125% of the analyte quantity added unlessoriginal sample concentrations exceed the true values of these "spikes" by a factor of four or more. In thiscase, affected analytes are not flagged even if recoveries are outside percentage recovery control limits.
The sample matrix duplicate, CCN = WG 18575-2 (MC0152D) was found to be outside CLP control limitsfor Chromium, Iron and Manganese.
CLP control limits for duplicate determinations are +/- 20% Relative Percent Difference (RPD) forconcentrations greater than or equal to five times the CRDL in both the original and duplicate samples, and+/- the CRDL for concentrations less than five times the CRDL. The RPD is not calculated if both theoriginal and duplicate values fall below the IDL.
A five-fold serial dilution of sample, CCN = SDIMC0143-10 (MC0152L) was performed in accordancewith CLP requirements for ICP analysis.
The adjusted sample concentration was outside CLP, control limits for Zinc, which is flagged with an "E"on all associated Form I and Form IX.
CLP control limits for serial dilution are defined as a deviation less than or equal to 10% in the dilutionadjusted concentrations from the original values for all analyte concentrations greater than fifty (50) timestheir respective Instrument Detection Limit (IDL) in the original sample.
An "E" flag indicates that a chemical or physical interference effect was encountered during the analysis ofthat analyte. As a result of the interference, all values for that analyte in the same matrix must beconsidered estimated values.
The laboratory manager or his designee, as verified by the following signature has authorized release of thedata contained in this hard copy data package.
ames E. MedlinSenior ChemistJuly 17,2002
Lab Name: COMPUCHEM
Lab Code: LIBRTY
U. S. EPA - CLP
COVER PAGE - INORGANIC ANALYSES DATA PACKAGE
Contract: 68W00082
SAS No.:Case No.: 30647
SOW No. : ILM04. 1
SD6 No. MC0153
EPA Sample No.
MC0153MC0153DMC0153SMC0164MC0165MC0166MC0167MC0168MC0169MC0170MC0171MC0172MC0173MC0174MC0175MC0176MC0177MC0178MC0179MC0180MC0181
Were ICP interelement corrections applied?
Were ICP background corrections applied?If yes-were raw data generated beforeapplication of background corrections?
Lab Sample ID.
MC0153-15WG18576-2WG1857€-1MC0153-16MC0153-17MC0153-18MC0153-19MC0153-20MC0153-21MC0153-22MC0153-23MC0153-24MC0153-25MC0153-26MC0153-27MC0153-28MC0153-29MC0153-30MC0153-31MC0153-32MC0153-33
Yes/No YES
Yes/No YES
Yes/No NO
Comments: THE FOLLOWING ANALYTES HAVE BEEN FLAGGED WITH AN "E" TO INDICATE SERIALDILUTION RESULTS WHICH ARE NOT WITHIN CONTROL LIMITS:
rHTtnMTTTM, PDTRSSTTJM '
I certify that this data package is in compliance with the .terms and conditions of thecontract, both technically and for completeness, for other than the conditions detailedabove. Release of the data contained in this hardcopy data package and in the computer-readable datasubmitted on diskette has been authorized by the Laboratory Manager or the Manager's designee, asverified by the following signature.
Signature: _
Date:
Name:
Title:
COVER PAGE - IN
-UJ^ \-tJT, JL
ILM04.J
U. S. EPA - CLPCOVER PAGE - INORGANIC ANALYSES DATA PACKAGE
Lab Name: COMPUCHEM Contract: 68WOOO82
Lab Code: LIBRTY Case Ho. : 30647 SAS No. : SDG No. : MC0153
SOW No. : ILM04.1
EPA Sample No. Lab Sample ID.
MC0182 MC0153-34
Here ICP interelement corrections applied? Yes/No YES
Were ICP background corrections applied? • Yes/No YESIf yes-were raw data generated beforeapplication of background corrections? Yes/No NO
Comments: THE FOLLOWING ANALYTES HAVE BEEN FLAGGED WITH AN "E" TO INDICATE SERIALDILUTION RESULTS WHICH ARE NOT WITHIN CONTROL LIMITS:
I certify that this data package is in compliance with the terms and conditions of thecontract, both technically and for completeness, for other than the conditions detailedabove. Release of the data contained in this hardcopy data package and in the computer-readable datasubmitted on diskette has been authorized by the Laboratory Manager or the Manager' s designee, asverified by the following signature.
K - (j>*JL Name: / /WWA£ A - Cfif JjSignature: ^/fK^jjU- K - (J^UL Name: / nfrfW4£ A- - (-fit &
i
Date: . LUULu I / O . 2 0^/^~ Title:
COVER PAGE - IN ILM04.1
CompuChema Division of Liberty Analytical Corp.501 Madison Avenue Cary.NC 27513
SDG NARRATIVE
CASE # 30647 SDG # MC0153CONTRACT # 68W00082
The indicated Sample Delivery Group (SDG) consisting of twenty (20) soil samples was received into thelaboratory information management system (LIMS) on July 2, 2002; intact and in good condition withChains of Custody (COC) Records in order, unless otherwise noted in any attachments or QualityAssurance Notices. Sample ID's reported in this data package are noted by the receiving department on theCOC if they differ from those listed by the samplers on the COC.
The samples were analyzed, in accordance with EPA - CLP Statement of Work (SOW) document ILM04.1for CLP TAL total metals and cyanide.
The correlation coefficients for the mercury and cyanide analytical runs are confirmed to be > 0.9950.
The cooler temperature bottle was present with samples received on July 2,2002; and sample temperaturewas 8.0 degrees Celsius.
EQUATIONS FOR SOLID SAMPLE CALCULATIONS:
Client sample MC0153 is used for illustration.
Any sample result that is < the instrument detection limit (IDL) will be entered at the IDL for thatanalyte.
ICP Equation:
Equation for obtaining metals sample results in mg/Kg as presented on FORM I data sheets from ICPinstrument acquired results in ug/L (ppb).
C x D x VConcentration (% solids) (mg/Kg)
W x SWhere
C = concentration (ug/L)D = dilution factorV = final volume in liters after sample preparationW = weight in grams of wet sampleS = %solids/100
Example: aluminum result ug/L to mg/Kg.48942.08 ug/L (C) x 1 (D) x 0.2 L (V)
= ll276.98 mg/Kg reported as 11300 mg/Kgl .Og(W) x 0.868(5)
Mercury Equation:
Equation for obtaining mercury sample results in mg/Kg as presented on FORM I data sheets frominstrument acquired results in ug/L (ppb).
A x D .x F
B x EWhere
A = ug/L HgB = wet weight of sampleD = dilution factor to bring sample into analysis rangeE = % solids/100F = final volume in liters (0.1 L)
Example: mercury result ug/L to mg/Kg0.10 ug/L* (A) x 1 (D) x 0.1 (F)
= 0.05760 mg/Kg reported as 0.058 mg/Kg*0.2 g (B) x , 0.868 (E)
* The result is reported down to the instrument detection limit.
Cyanide Equation:
Equation for obtaining cyanide sample results in mg/Kg as presented on FORM I data sheets frominstrument acquired results in ug/L (ppb).
A x D x F
B x EWhere
A = ug/L CNB = wet weight of sampleD = dilution factor to bring sample into analysis rangeE = % solids/100F = final volume in liters (0 05 L)
Example: cyanide result ug/L to mg/Kg0.60 ug/L* (A) x 1 (D) x 0.05 L (F)
= 0.03456 mg/Kg reported as 0.035 mg/Kg*l.OOg(B) x 0.868 (E)
* The result is reported down to the instrument detection limit.
SAMPLE IDs.
The following customer IDs are associated with this SDG:
MC0153 MC0164 MC0165 MC0166 MC0167 MC0168
MC0169 MC0170 MC0171 MC0172 MC0173 MC0174
MC0175 MC0176 MC0177 MC0178 MC0179 MC0180
MC0181 MC0182
7
INSTRUMENTAL QUALITY CONTROL:
All calibration verification solutions (ICV & CCV), blanks (ICB, & CCB), and interference check samples(ICSA & ICSAB) associated with this data were confirmed to be within EPA CLP allowable limits.
SAMPLE PREPARATION QUALITY CONTROL:
The sample preparation procedure verifications (LCSS & PBS) were found to be within acceptable rangesand all field samples were prepared and analyzed within the contract specified holding times.
MATRIX RELATED QUALITY CONTROL:
The sample matrix spike, CCN = WG18576-1 (MC0153S) was found to be outside CLP control limits forantimony and thallium. The reported concentrations for these analytes are flagged with an "N" on allassociated Form 1 and on Form 5a.
An "N" indicates a matrix-related interference in the sample preparation procedure &/or analysis for theflagged analyte. This is normally the consequence of a relatively high anionic content in the sample or (forsome sediments) an inconsistent sample matrix relative to that analyte.
CLP control limits for matrix spike recoveries are set at 75% to 125% of the analyte quantity added unlessoriginal sample concentrations exceed the true values of these "spikes" by a factor of four or more. In thiscase, affected analytes are not flagged even if recoveries are outside percentage recovery control limits.
Post-digestion spikes are mandatory for analytes demonstrating unsatisfactory matrix spike recoveriesduring ICP analysis (excluding silver). The results of such spikes are presented on Form 5b.
Unsatisfactory recovery of post-digestion spikes of this type do not have bearing upon the aforementioned"N" flags, but may indicate interference during analysis &/or a solution matrix which is hostile to theanalyte in question.
Satisfactory recovery of an analyte in a post-digestion spike of this type implies interference by therequired preparation procedure or in the sample matrix itself. Lack of uniformity for an analyte insediments will also result in satisfactory recovery of post-digestion spikes after failure in the related matrixspike.
The sample matrix duplicate, CCN = WG18576-2 (MC0153D) was inside CLP control limits for therequested analytes.
CLP control limits for duplicate determinations are +/- 20% Relative Percent Difference (RPD) forconcentrations greater than or equal to five times the CRDL in both the original and duplicate samples, and+/- the CRDL for concentrations less than five times the CRDL. The RPD is not calculated if both theoriginal and duplicate values fall below the IDL.
A five-fold serial dilution of sample, CCN = MC0153-15 (MC0153L) was performed in accordance withCLP requirements for ICP analysis.
The adjusted sample concentrations were outside CLP control limits for calcium, chromium, andpotassium, which are flagged with an "E" on all associated Form 1, the Cover Page and Form 9.
An "E" indicates that a chemical or physical interference effect was encountered during the analysis of theflagged analyte. As a result of this interference, all values for the analyte in the same matrix must beconsidered to be estimated quantities.
8
CLP control limits for serial dilution are defined as a deviation less than or equal to 10% in the dilution-adjusted concentrations from the original values for all analyte concentrations with values greater thanfifty (50) times their respective Instrument Detection Limit (IDL) in the original sample.
The laboratory manager or his designee, as verified by the following signature has authorized release of thedata contained in this hard copy data package.
Thomas R. ColeData Reviewer IIJuly 16,2002
CompuChema Division of Liberty Analytical Corp.501 Madison Avenue Cary.NC 27513
DATA REPORTING QUALIFIERS FOR INORGANICS
On Form I, under the column labeled "C" for concentration qualifier and "Q" for qualifier, each result is flagged with the specific datareporting qualifiers listed below, as appropriate. Up to five qualifiers may be reported on Form I for each analyte.
The C (concentration) qualifiers used are;
I): This flag indicates the analyte was analyzed for but not detected. This reported value was obtained from a reading thatwas less than the Instrument Detection Limit (IDL). The IDL will be adjusted to reflect any dilution and, for soils, the
percent moisture.
B: This flag indicates the analyte was analyzed for and the reported value was obtained from a reading that was less than theContract Required Detection Limit (CRDL) but greater than or equal to the Instrument Detection Limit (IDL).
The Q qualifiers used are:
E: This flag indicates an estimated value. This flag is used:
1. When the serial dilution (a five fold dilution for CLP and a five fold dilution for SW-846 method 601 OB) results arenot within 10%. The analyte concentration must be sufficiently high (minimally a factor of SOX above the IDL inthe original sample).
2. When the analytical spike recovery associated with the sample is below 40% after two successive dilutions byGraphite Furnace Atomic Absorption (GFAA).
M: This flag applies to GFAA analyses for concentrations greater than the Contract RequiredDetection Limit (CRDL). This flag is only used for GFAA if the analytical sample or analyticalspike duplicate injection reading is not within 20% of the Relative Standard Oeviation-(RSD).
N: This flag indicates the sample spike recovery is outside of control limits:
*: This flag is used for duplicate analysis when the sample and the sample duplicate results are not .within control limits.
S: This flag applies to GFAA analyses to indicate the reported value was determined by theMethod Of Standard Addition (MSA).
\V: This flag applies to GFAA analyses when the post-digestion spike (analytical spike) is out of control limits (85% -115%),while sample absorbance is less than 50% of "spike" absorbance ["spike" is defined as (absorbance or concentration ofspike sample) minus (absorbance or concentration of the sample)].
+: This flag applies to GFAA analyses when the correlation coefficient for the MSA is less than 0.995 after two MSAanalyses.
NOTE: Entering "S", "W", or "+" is mutually exclusive. No combination of these qualifiers can appear in the same field for ananalyte.
\
The extensions: D, S, SD, L. A, added to the end of the client ID represent as follows:D: matrix duplicateS: matrix spikeSD: matrix spike duplicateL: serial dilutionA: post digestion spike
Method Codes:P: ICP PLASMACV: MERCURY COLD VAPOR AA 1 f)CA: MIDI-DISTILLATION SPECTROPHOTOMETRIC •*-f: FURNACE AA