united metal products powerpoint
DESCRIPTION
TRANSCRIPT
OUR COMMITMENT
• To deal fairly and honestly in all situations and business relationships.
• To consistently innovate cutting-edge, green technology to meet the most unique
cooling and heating demands.
• To provide the highest level of engineering and manufacturing techniques in order
to deliver the best cooling/heating solutions and products possible.
Components
Base Frame & Floor
Base Fame Material: 6” or 8” tubular galvanized steel
Floor Material: 14 gauge G-90 galvanized steel Capped watertight
Floor Openings: Walkway bar grating is provided on all accessible floor openings
Lifting Lugs: Permanent, welded on lifting lugs are standard.
Components
Base Frame & Floor – Options
Base Materials: 304 Stainless steel 316 Stainless steel Aluminum
Floor Materials: 12 or 10 gauge G-90 galvanized 14, 12 or 10 gauge 304 stainless Steel 14, 12 or 10 gauge 316 stainless Steel Aluminum Treadplate (galvanized, aluminum or stainless)
Lifting Lugs: Removable / bolt-on type
Insulation: 4” x 3# pcf
Options: Auxiliary floor drains (non-piped or piped to
side of unit) Continuous welded floor
Optional Floor Grates:
304 stainless steel
316 stainless steel
Aluminum
Components
Unit Casing
Standard Casing: 2” Galvanized - 18 Gauge G-90
Standard Liner: 22 Gauge G-90 galvanized linerStandard Finish: Pre-paint enamel finish Color “desert beige”
Standard Internal Framing: 2 x 1 x 16 gauge G-90 galvanized tubing.
Standard Insulation: 2” x 1.56# pcf (3# equivalent)
Components
Casing and Liner Options
Components
Optional Casing Materials: All Casings are available in 4” thickness 16 Gauge – G-90 galvanized steel 16 Gauge – #304 or #316 stainless steel .060” Aluminum
Liner Options: Solid 22 gauge in either #304, #316
stainless or aluminum Perforated 20 gauge in either G-90
galvanized, #304 , #316 stainless or aluminum
Optional Casing Construction:
Thermal break
Optional Insulation: 2” or 4” x 1.5# pcf Fiberglass w/ neoprene coating 2” or 4” x 3# pcf with or without neoprene coating 2” or 4” 3# pcf rigid insulation
Demounts: Available as needed per site conditions.
Components
Custom Colors
Custom colors are available in a baked epoxy powder coating
Components
Demounts
Standard on units over 138”wide and
540” long.
Optional demounts: Available as needed by site conditions.
(Demounted sections have j-box and flexible whip on either side of demount when electrical is present in that section. All fasteners and gasketing material is shipped loose with the unit for field
installation by installing contractor.)
Components
Doors
Standard Doors: 18 Gauge G-90 galvanized steel exterior
22 Gauge G-90 galvanized liner
2” x 1.56# pcf insulation
Heavy duty stainless steel butt type hinges
Bulb type gasket
Ventlock #260 handles
Stainless steel hinges
Door Options: Ventlock #310 handles 12” x 12” view ports View port with desiccant pouch Thermal break construction Micro-door switch 18 Gauge 304 or 316 stainless exterior 16 Gauge G-90 galvanized, #304 or #316
stainless exterior .060 Aluminum exterior 22 Gauge 304 or 316 stainless liner 20 Gauge G-90 galvanized, 304 or 316
stainless
Components
Louvers & Weather Hoods
Louvers: Standard: 4” formed galvanized double drainable Epoxy powder coated with bird screen Nominal velocity of 500 FPM
Optional Louvers: High Velocity (Vertical Vane) – Storm proof Velocities up to 1000 FPM (Nominal) 4” aluminum double drainable 6” Formed Galvanized or 304, 316 Stainless - Drainable Velocities to 600 FPM
Weather Hoods:Standard: Intake Snorkel Type 18 Gauge G-90 Galvanized Steel with Bird screen Nominal Velocities to 750 FPMStandard: Discharge Angle Type 18 Gauge G-90 Galvanized Steel w/ Bird screen Nominal Velocities to 1,200 FPM.
Optional Materials: 0.060” Aluminum 16 Gauge 304 or 316 Stainless Steel with Matching Bird screen.
Components
Dampers Standard: Airfoil – Galvanized
Blade – with Edge & Jamb Seals
Options: Actuators – 2-Position, Modulating, Spring Return or Non-Spring Return Actuators can be mounted and wired or just mounted Airfoil – Extruded Aluminum – Ultra Low Leakage Dual Deck or Triple Deck Multi-zone Damper – Extruded Aluminum – Zones in multiples of 6” Actuators can be wired for either 24v or 120v
Components
Airflow Measuring
Grid mount or Bell mouth of air monitoring can be supplied and installed.
Components
Filtration
Filtration Options: Permanent aluminum washable filters 1” or 2”
depth 30% efficient pre-filters (2” or 4” Depth) Bag filters w/ efficiency ratings of 65%, 85% &
95%. Depths available are 15”, 22”, 30” & 36”. Rigid filters w/ efficiency ratings of 65%, 85% &
95%. Nominal 12” deep. HEPA filters w/ efficiency ratings of 99.9%,
99.99% & 99.999%. DOP rating is also available. Magnehelic gauges are available with all filter
arrangements. All outdoor units with magnehelic gauges have a sun cover to protect the dial from fading.
Any special filtration needs can also be accommodated
Framing Options: Standard frame is G-90
galvanized & gasketed. Front access is required.
Slide rails are provided for side access.
#304 or #316 Stainless frames are available.
HEPA filters must use a special sealing frame. These frames are G-90 galvanized steel.
Components
Coils
Water & DX Coils: ½” or 5/8” with 0.020” cooper tubes 0.006” aluminum fins 16 gauge galvanized casing. Tube walls 0.025”, 0.035”, 0.049” Fin thickness 0.0075” or .0090” Optional fin material – copper Optional Casing: Stainless Steel All cooling coils over 48” are stacked with an intermediate drain pan and copper downspouts All drain pans are IAQ double slope insulated Stainless steel is standard
Steam Coils: 5/8” or 1” with 0.025” copper tubes 0.0075” aluminum fins and 16 Gauge galvanized casing Optional tube walls: 0.035” & 0.049” Optional Fin Thickness 0.0090” Optional Fin Material - Copper Optional Casing: Stainless Steel
Components
Fans
Available Fans: Airfoil plenum Quiet airfoil plenum Airfoil DWDI Backward Incline DWDI Forward curved DWDI
Available Motor Types:
ODP – High efficiency ODP – Premium
efficiency TEFC – High efficiency TEFC – Premium
efficiency
Isolation: Standard 1” deflection housed isolators optional 2” & 3” All fans are mounted on structural isolation bases
Optional Fan Coatings: Air dried or baked epoxy, air dried or
baked heresite or phenolic coating
Optional Fan Materials: Aluminum wheel, housing and/or
frame #304 or #316 stainless steel
housing, wheel (backward incline DWDI only) and/or shaft
Components
Specialty Fans
Hostile Enviroment Available Construction: AMCA spark ‘B’ construction
Specialty Motor Types: Mill and chemical duty explosion proof
Additional specialty fans and motor arrangements are also available
Components
Furnaces
Various Types of Furnaces are Available for Installation Indirect (Duct Type) – Indoor or outdoor
Indirect – drum & tube power burner
Electric resistance
Direct fired
Control Options: On-Off
Hi-Lo-Off
Modulation (mechanical, electronic, or external control signal)
*Heat exchanger materials are 400 series stainless steel, except for electric
resistance type.
Components
Evaporative Cooling
Standards: 16 Gauge 304 stainless sump 16 & 18 Gauge 304 stainless casings Type ‘L’ copper piping w/ manual Balancing valve & metered bleed Stainless steel pump (304 stainless pumps are available) Additional horse powers are also available. Media is available in CelDek or Class II fire rated Standard piping is copper. Schedule 40 or 80 PVC is available
Components
Humidification
Self-generating Steam Steam to steam Steam dispersion Multi-stage evaporative
Types of Humidifiers Available for Installation:
Components
Acoustics
Options: Client’s have the option of having an acoustical analysis performed based on the components selected.
Various types of traps can be installed.
Components
Low Temperature Cooling Tower
Options: Low Temperature Tower with evaporative cooling
Cooling technology to lower water temperature within 2-3 degrees of wet-bulb
Typical efficiencies of 70- 75% are normal
Construction:Sump: 12 gauge 304 Stainless
Steel
Casing: 16 & 18 gauge 304 stainless steel
Media: CelDek or GlasDek
Pump: end suction w/ stainless housing
Piping: Copper or PVC
Components
Condensing Unit
Mounting & Piping of Condensing Units is Available
Components
Boiler / Equipment Room
Option: Units can be equipped with an integral “equipment room”
Components
Options: Motors wired to J-box
Single point electrical w/ starters
Single point electrical w/ VFD’s
Complete custom controls system
Special Purpose Enclosures
ElectricalSss
Testing Options
Unit Testing
Testing Options: All units are run tested before being loaded for shipment
Test reports are available upon request
ETL Tested
Custom Air Handling
Custom-Air ®
Benefits and Features: Double/single wall construction Evaporative cooling Special filtration Humidity control DX coils
Chilled water cooling coils Hot water heating coils Steam heating coils Gas heat Controls
Custom Air Handling
Modular Air Handling Unit (MAHU)
Benefits and Features: Modular design - can be split between any section Low profile design suitable for ceiling or floor mounting Indoor and outdoor units Low-leak cabinet construction - less than 1% CFM cabinet leakage at a positive pressure of 6″WG TSP Complements UMPs larger custom-air range Internally isolated direct drive plug fan for quiet operation and zero belt maintenance 500 to 11,000 CFM @ up to 6.00″ TSP
2” and 4” double wall construction, perforated or solid lined 26 standard cabinet sizes Inlet / mixing modules – all duct locations available Panel and box filters up to MERV 14 HW, CW, DX and steam coils available up to 10 rows deep #304 SS double sloped drain pans Gas or electric heat options ETL listed and labeled in accordance with UL1995
Custom Air Handling
Vertical Air Handling Unit (VAHU)
Benefits and Features: Small footprint with main access on one side Internally isolated direct drive plug fan for quiet operation and zero belt maintenance 500 to 5,400 CFM @ up to 6.00″ TSP 2” double wall construction, perforated or solid lined 18 gauge G90 galvanized steel cabinet - stainless steel or Hybralume™ available
4 standard cabinet sizes Inlet / Mixing modules Panel and 4” box filters up to MERV 14 14 HW and CW coils as standard #304 SS double sloped
drain pans Pre-wired for single point power connection ETL listed and labeled in accordance with UL1995
Energy Recovery
Energy Recovery Unit ™ (ERU)
Benefits and Features: 0-100% outside air 5,000 to 40,000 CFM and higher Production or custom design Energy recovery: heat pipe, air to air, air to water, heat wheels Engineered primarily for high outside air requirements: 30%-100%
Energy recovery: heat pipe, air to air, air to water, heat wheels Engineered primarily for high outside air requirements: 30%–100% ETL labeling available
Energy Recovery
Energy Recovery Figure 1 The Wet Bulb Energy
Recovery System
Wet Bulb Energy RecoveryUnited Metal Products is the industry innovator and leader with regards to effective energy recovery in high dry bulb regions. UMP has spent the last fifteen years perfecting the technology called “Wet Bulb Energy Recovery.” The key to super efficient energy recovery efficiency in the high dry bulb regions of the world is moving the temperature exchange at the wet bulb temperature as opposed to the dry bulb level when the air exits the unit. When this cutting edge method is implemented, energy recovery efficiencies of over 100% can be attained. Not only does this translate into a smaller carbon footprint left on the environment, but it can also mean an increase in an organization’s bottom line.
Wet Bulb Energy Recovery
The Wet Bulb Energy Recovery System
Components
Energy Recovery Options
Cross FlowThese systems are the most efficient with regards to sensible energy recovery as they can provide up to 75% efficiency. They also have no moving parts, an extremely compact design, and a competitive cost.
Heat WheelThese systems run up to 65% efficient with regards to sensible energy recovery. The main advantage of the heat wheel is that it has minimal moving parts. However, the size of the heat wheel determines the size of the unit and this limits design flexibility.
Heat PipesThese systems run between 55%-65% efficient with regards to sensible energy recovery. The main advantage of these units is that they have no moving parts which means very little maintenance is necessary. They provide the highest CFM of the energy recovery units and are offered in custom configurations.
Evaporative Technologies
Cel-Air ®
Benefits and Features: 120 cataloged sizes from 6,000-100,000 CFM 2″ double wall or single wall construction Galvanized, aluminum, stainless steel materials 5,000-100,000 CFM and above Evaporative cooling ETL Labeled under UL1995 Standards
Evaporative Technologies
Fan-Air ®
Benefits and Features: Commercial and industrial applications Models UMP-700 Series are AMCA Licensed Up to 60% energy savings over other evaporative coolers
Low profile ETL - labeled under UL 507 Powder coated Gas Heat options available
Innovative Design
Direct Replacement Unit ™ (DRU)
Benefits and Features: Direct replacement for UMP FanAir coolers 15 Ton / 6000cfm supply air Other sizes in development Supply/Return duct and drum louver diffuser available 1” double wall Hybralume™ construction Hinged access doors Economizer and recovery 2” pre-filters up to MERV 8
Double-sloped drain pan under cooling coil Direct drive blower plenum fan with VFD drive Single or dual point power connections Supply and return air smoke detectors R-410A refrigerant ETL listed and labeled in accordance with UL1995
Packaged Central Plant
Chil-Pak ®
Benefits and Features: Pre-engineered package saves on valuable lead Economical for projects down to 150 tons Water side plate and frame economizer option Pre-tested, labeled, and listed under ETL Compact Design
Saves labor in installation, single point c.w., controls and electricity Single point of responsibility 2” double wall construction Sound Secure System
Applications
Various Applications
Convention centers Factories Food processing plants Gymnasiums
Aircraft hangars Call centers Casinos Clean rooms
Military facilities Indoor pools Kitchens Manufacturing facilities Textile factories
Theaters Warehouses Water treatment plants
Pharmaceutical labs Prisons Schools Terminals
Hospitals Mining facilities Museums Office buildings