1

Uniflair Uniflair

Smart KeySmart KeypCO ManagerpCO Manager

2

Smart Key

Smart key is an electronic device used to program and service pCO system or µC3 family controllers.Smart Key simplifies the transfer of data between pCO controllers and PC by exploiting the high capacity flash memory for storing software applications, Bios and variable logs.

3

• Smart Key is the new programming key compatible with all pCO controllers (pCOXS, pCOC, pCO1, pCO2 and pCO3)

• Connects to pCO‘s pLAN port

• Battery is not needed. Power directly supplied by pCO controller or by PC (in the last case using USB adapter)

• MicroProcessor based

Hardware Features

4

• Different operating modes, configurable via PC as:1. uploading only2. downloading only3. historical data only4. a mix of the above

• Possibility to store multiple applications (pLAN applications or multiple singles)

• Automatic download to controller at pLAN address recognition

• Upload / download password protected

Software Features

5

pLAN serial port connection

Smart Key is compatible with all pCO controllers

The connection is easy and fast: the smart key must be connected only through a telephonic without any kind of others connections.

6

Looking inside..

• Upload / download password protected

• Possibility to upload / download more than one software application or historical data logged (by pLAN address recognition)

• Software checks for preventing a not correct files upload in the pCO controller

7

pCO Manager

• pCO Manager is a tool created to transfer data between the computer to the Smart Key and directly to the pCO motherboards

• pCO Manager is composed of 2 sub-programs:

Winload

SmartKey programmer

8

pCO Manager

9

WinloadWinLoad32 is the software for PC that manages communication between the PC and the pCO Sistema family controllers (pCO3, pCO2, pCO1, pCO1XS, pCOC).

 The following operations can be performed using this software:

- Updating the firmware and the software of the controller;

- Acquiring data from the board, such as the configuration parameters and the data logged;

- Define the logic for logging the events saved on the board.

10

Winload

Folder where select the files These are the languages you can choose

These are the flash and the Bios (it must be installed as first)

It must be always flagged

Status of the connection

They must be correct in order to permit the connection

11

Smart Key Programmer

Smart Key programmer is a software that permits the complete management of the key.

Through this program it is possible to:

1.Protect the key from not requested uses through a password2.Transfer the software from the computer to the key3.Transfer the software from the key to the computer4.Download the historical events from the pCO motherboard to the key.

12

Smart Key Programmer

Status of the connection

It must be correct in order to permit the connection

Occupied memory

Here I select the files that compose the kit to upload

Here I select the kit that I want to upload

Here I can download the historical events

13

What I need if….I WANT TO TRANSFER FILES FROM THE COMPUTER TO THE SMARTKEY

In order to permit the transfer of the data from the computer to the Smartkey, it is necessary to use the Smartkey usb converter (the white one). Through this converter the key will take the supply from the computer. When the leds of this converter will start blinking, it means that the connection is ok.

If it’s the first time the converter is used, the drivers are mandatory and must be installed once connected the converter.

It’s important selecting the correct serial port, otherwise the connection won’t start.

Smart key has a sufficient memory, able to store a kit with a lot of languages, but it can save only one kit per time.

14

What I need if….I WANT TO TRANSFER FILES FROM THE COMPUTER TO THE pCO

In order to permit the transfer of the data from the computer to the Smartkey, what is needed is only the USB convert. This converter permits permits the connection between USB and RS485.

If it’s the first time the converter is used, the drivers are mandatory and must be installed once connected the converter.

It’s important selecting the correct serial port, otherwise the connection won’t start.

If there is the need to upload also the bios, it is important to install as first the bios, and then the application files.

15

….then•FIRST THING TO DO IS SWITCHING OFF THE UNIT AND THEN

MAKE THE PROGRAM SET-UP IN ORDER TO CLEAR THE MEMORY OF THE pCO

•SET THE pCO AGAIN WITH ALL THE PREVIOUS PARAMETERS: HARDWARE CONFIGURATION AND OPERATIVE SETTINGS

For a complete guide to softwares and tools, please refer to the software instructions that after sales team prepared

16