ultrasonic · ultrasonic 2.1 - 4.0 m (6.9 - 13.1 ft) 16 m (52.5 ft)* ft)* ft)* 12 m (39.3 ft)* >...
TRANSCRIPT
ULTRASONIC
www.lighting.philips.com/dynalite
Multifunction Sensor
Installation Instructions
Instructions d’installation
Installationsanweisungen
Instrucciones de instalación
Istruzioni per l’installazione
Installatie-instructies
インストール手順安装指示
90 mm (3.54 in)
58 mm (2.28 in)
32 m
m (
1.2
5 in
)
22
mm
(0
.86
in)
90 mm (3.54 in)
35
mm
(1.
38
in)
Devices must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.
Les appareils doivent être installés par un électricien diplômé conformément à tous les codes et réglementations électriques et de construction nationaux et locaux.
Die Geräte sind von einem qualifizierten Elektriker in Übereinstimmung mit allen geltenden Vorschriften zu installieren.
Los dispositivos deben ser instalados por un electricista calificado y cumpliendo todas las normas y regulaciones, tanto nacionales como locales, sobre instalaciones eléctricas y obras.
I dispositivi devono essere installati da un elettricista qualificato in conformità con le norme locali e nazionali vigenti in materia di costruzioni edilizie e installazione di impianti elettrici.
De apparaten moeten worden aangebracht door een gekwalificeerde elektricien en in overeenstemming met alle nationale en plaatselijke elektriciteits- en bouwvoorschriften.
装置を取り付ける際は、資格のある電気技師に依頼し、 国および地域の電気および建設に関するすべての法令に 従ってください。
根据国家/地区及当地的电气与建筑规范和法规，该设备必须由有资质的电工进行安装。
.
50° C (122° F)
0° C (32° F)
≤90%
1
IEC Pollution Degree II
ULTRASONIC
2.1 - 4.0 m (6.9 - 13.1 ft)
16 m (52.5 ft)*
8 m (2
6.2 ft
)*
4 m (13.1 ft)*
12 m (39.3 ft)*
> 2 m (6.5 ft)
25˚ C (77˚ F)*
2.4 m (7.9 ft)*
> 18 m (59.1 ft)
DUS804CS-UP
2
60°
5
9 10
6PE IR
DyNet RS-485
30 mm (1.18 in)
51 mm (2.0 in)
3 - 25 mm (0.12 - 0.98 in)
64 mm (2.52 in)
≤ 2.5 mm2
12+ AWG
0.4 Nm3.5 Lb-in
12 V 80 mA
≤ 20 mm (0.79 in)
DyNet RS-485
SELV/Class 2SHLD
GND
D+
D-
+12 V
≤ 2 A
30 mm (1.18 in)
51 mm (2.0 in)
3 - 25 mm (0.12 - 0.98 in)
64 mm (2.52 in)
≤ 2.5 mm2
12+ AWG
0.4 Nm3.5 Lb-in
12 V 80 mA
≤ 20 mm (0.79 in)
DyNet RS-485
SELV/Class 2SHLD
GND
D+
D-
+12 V
≤ 2 A
7
Do not connect inputs to mains.
Installation of a home and building automation and control system shall comply with HD 60364-4-41. The temperature limits and current-carrying capacities for the communication wires specified in HD 384.5.523 shall not be exceeded.
IEC Overvoltage Category III
2.1
- 4
.0 m
(6
.9 -
13
.1 ft
)
7.0 m (23 ft)*
2.4
m (
7.9
ft)
*
5.5
m (1
8 ft)*
> 2 m (6
.5 ft)
25˚ C (77˚ F)*
120°
IEC Pollution Degree II
PIRPIR 43 A 3 B
8 A
8 B
AZZ 474 0519 R16
© 2019 Signify Holding. All rights reserved. Specifications are subject to change without notice. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.
www.lighting.philips.com/dynalite
30 mm (1.18 in)
51 mm (2.0 in)
3 - 25 mm (0.12 - 0.98 in)
64 mm (2.52 in)
≤ 2.5 mm2
12+ AWG
0.4 Nm3.5 Lb-in
12 V 80 mA
≤ 20 mm (0.79 in)
DyNet RS-485
SELV/Class 2SHLD
GND
D+
D-
+12 V
≤ 2 A