ultrasonic pouch sealing systems · • industry first wash-down generator with touch screen...
TRANSCRIPT
ultrasonic pouch sealing systems
for more information: 1-800-745-1105 www.sonics.com
SonicsEdge: The industry’s strongest seals with new patent-pending seal pattern, plus• Industry first self-leveling tooling• User-friendly design and easy to maintain• Process control to identify folded pouches • Systems available to suit large and small pouches • Ethernet IP communication available• Industry first wash-down generator with touch screen interface • Cost-effective retrofits for existing pouch filling machines
• Hermetic seals even when internal product is present in the joint area
• Higher percentage of leak-free seals than heat sealing
• More consistent seals than heat seal technology
• Cool ultrasonic tools enable sealing of heat-sensitive products without damage
• Data output for process control available
Model T201WD Pouch Sealer shown with optional support column and base
Optional wash-down generator with touch screen interface
Corporate Headquarters 53 Church Hill Road, Newtown, CT 06470 USA203.270.4600 800.745.1105 203.270.4610 fax [email protected]
dimensional dataAll Dimensions: Inches (mm)
Sonics & Materials, Inc.
A3787 ISO 9001
Registered by UL to ISO 9001
© 2018 Sonics & Materials Inc.Specifications subject to change without notice.Not responsible for typographical errors.Printed in U.S.A. 00/03/19
SUPPORT COLUMN HUB
ACTUATOR MOUNT PLATE KIT GENERATOR DIMENSIONS
THE INFORMATION AND DATA CONTAINED HEREIN IS PROPRIETARY AND IS SUBMITTED IN CONFIDENCE, AND SHALL NOT BE DISCLOSED, USED OR DUPLICATED FOR ANY PURPOSE WHATSOEVER WITHOUT THE PRIOR WRITTEN PERMISSION OF SONICS AND MATERIALS INC., NEWTOWN CT. THIS LEGEND SHALL BE MARKED ON ANY REPORODUCTIONS HEREOF IN WHOLE OR IN PART. RECEIPT OF THIS DOCUMENT SHALL BE DEEMED TO BE AN ACCEPTANCE OF THE CONDITIONS SPECIFIED HEREIN.
CONFIDENTIAL INFORMATION
53 CHURCH HILL RD.NEWTOWN, CT 06470
20.55 ±2.0(521.97 ± 50.8 mm)
6.24(162.56 mm)
7.44 (188.88 mm)
6.24(158.50 mm)
UP TO 12.0(UP to 304.7 mm)
31.78 ±2.0(807.21 ± 50.8)
22.40 (568.96 mm)
24.48(621.53 mm)
.50(12.7 mm)
1.40(35.56 mm)
9.94 ± .750(252.48 ±19.04 mm)
TOLERANCES SIZE DRAWING NUMBER REV
DECIMAL FRACTIONAL.X= .030 1/64
.XX= .015 ANGULAR.XXX= .005 1/2
D 304-0002C ASHEET 1 OF 2
POUCH SEALER PRESS ASSEMBLYWASHDOWN
LIFECYCLE
ReleasedDATE
11/1/2018DRAWN BY
SVMATERIAL
SEE BOMSCALE
0.500LEGACY DWG NO
REV
DESCRIPTION APPRV DATE
VERSION A.4FILE LOCATION /Products/Plastic Welding/Design/T20AWD
10000819