ultra860+ manual english

ULTRA SERIES INKJET PRINTER USER MANUAL

Thanks for using ULTRA series printers of Shanghai Wit-color Digital Science & Technology Co., Ltd. To ensure all operations will be taken in accurate and safe way, all operations should be carried out based on well understanding to the performance and capability of printers. Please keep this manual properly. Wit-color equipment user manual and printing program are only for the use of legal authorized individuals. Without companys permission, any form of copy, modification, exchange or publications to the content are prohibited. Any action against the above demands will bear criminal and civil obligations. Details contained in this manual may be subject to change with notice. We had tried our best to edit this manual and examine all products, it will be highly appreciated if you can find any error in printing and inform us.

Shanghai Wit-color Digital Science & Technology Co., Ltd. All Rights Reserved by Wit-color Corp

Shanghai Wit-color Digital Science &Technology Co., Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946

www.wit-color.cn E-mail: [email protected]

1


To facilitate the contacts, you can communicate with us in the following way. A. Please read user manual first and get direct help. B. Please browse our web site www.wit-color.cn and read the part of Technique Support, we will provide some measures for solving the updating technique questions. C. You can contact our agents Technical Department or our branches by telephone. D. Please contact Wit-color Technical Support Department by telephone. Working time: 8:30-20:00 professional Engineer on duty. Fax available from 20:00 to 8:30, our professional technicians will contact you as soon as possible. E. Internet Technical support: www.wit-color.cn E-mail: [email protected] MSN: [email protected] F. Telephone of Shanghai After Sale Service Center: 0086-2154881966 ext 117 Fax: 0086-21-54881617 Service Hotline: 13371971397 G. If you need spare parts, please fill in the application form and fax to 0086-21-54881617 as requested. H. If explanation in words is not effective, photos are preferred.

Notice:Without the permission from manufactory, all distributors and end-users can not exchange the spare parts privately. Spare parts Repairing at unauthorized units and unoriginal spare parts using are strictly prohibited. Otherwise, all damage caused by these actions will be users responsibility. And then the manufactory will stop all after service to the corresponding printer. Tearing, scratching and exchanging of Bar Code and Serial Number are strictly prohibited. Once this kind of case was found, all after service to the corresponding printer will be stopped.Please check the following information that you registered to our Techincal Support department, so that we could provide prompt service when any trouble occurs. (Please fax the following information to Wit-color Technical Support Department at 0086-21-54881617 or 54889946 before installation.) Name Address Contact Phone Mobile Phone Resolution Product Model 200DPI 720DPI Product Code Dongle Code Printer Length 2.2M 2.6 M 3.3 M Fax e-mail Printhead Quantity 4H 12H 16H 8H 6C 12H



2


ContentChapter 1 General Introduction of Printer Models5

1.1 Ultra860+5 1.2 Printer/Lite printer 6

Chapter 2

Installation Guide7

2.1 Safety Guide and Instruction7 2.2 Printhead Installation 8 2.3 Preparation for Installation9

Chapter 3

Control panel Introduction 10

3.1 Left printer box

10

3.2 Right printer box

10

Chapter 4

Circuit Diagram 11

4.1Ultra860+

12

Chapter 5

Mechanical Adjustment13

5.1 Adjustment of printing panel

13

Chapter 6

Software Guide

14

6.1 ULTRA Series software14 6.1.1 Installation of ULTRA software 14

6.1.2 Usage of ULTRA software 15 6.1.2.1 Introduction of ULTRA software 15 6.1.2.2 Menu Structure of Controlling Program16 6.2 WIT Series Software 24 6.2.1 Installation of WIT software 24 6.2.2 Usage of WIT Software28 6.2.2.1 General Introduction of WIT Software28 6.2.2.2 Control Program Menu structure 29



3


Chapter 7

Daily Maintenance29

7.1 Print head Daily Maintenancev29 7.2 Printer Daily Maintenancev 31

Chapter 8

Trouble Shooting

8.1 Print Head Part 8.2 Ink Supply System 8.3 Heating System 8.4 Movement System 8.5 Media Feeding/Take up System 8.6 Computer System 8.7 Delta Servo Controller error message solution



4


Chapter 11.1 Ultra860+

Printer Model Introduction

1.2 printer/Lite printer AssemblyStep 1Open the packing wooden box, take out the parts showed in the map and assemble as the direction of arrowhead marked. Match all parts one by one, and then tighten screws.



5


Step 2Take out the parts and assemble as the direction of arrowhead marked showed in the map. Match all parts one by one, and then tighten screws.

Assembling finished printer is as the following map showed.



6


Chapter 2 Installation Guide2.1 Safety Guide and InstructionNOTICE: Please follow the Warning and Instructions labels on printers. Please read the following instructions before running ULTRA Printers of wit-color Corp. Please do not spray any chemical liquid into printer, or onto the electronic circuit board or data cables. Power supply must meet requirements that marked on printer. Please do not install the printer together with other high-power equipments or in the same loop-line. Do not use broken power supply cables. Please make sure the total ampere of all equipments is not exceeding the rating ampere of electrical outlet. Without enough knowledge, please do not repair the printer by yourself. When the following occurs, please contact professionals. Any damage of power supply cables or connection parts; Liquid sprayed into the printers; Printer got strong mechanical knock. Printer cannot work normally or evident changes in performance; Please do not pull out the plugs or data cables before power off; Please put the ink tank away from children, drinking or touching by child are prohibited. If inks sprayed on skin, please wash with soap and rinse thoroughly. If ink splashed into eyes, please flush immediately and seek medical advice soon. Generally each three months, please take the ink tanks off, clean thoroughly and dry up, and then reuse. To guarantee the printing quality, to change new clean ink tank is preferred. If printer with password, please pay attention to the reminder interface that occured before the password interface appearing. The conditions of temperature and humidity of workshop should be constant, and printer should be away from sunlight or powerful light or heating sources direct irradiating. All equipments should be grounded well, and UPS system is needed. To avoid the influences from computer, high configuration computer is preferred.

Notice:If printer with password, please pay attention to the reminder interface that occured before the password interface appearing, to ensure your normal work schedule please collect password from local seller/agent in time while the password reminder interface occured.



7


2.2 Print head InstallationStep 1: Check print heads appearance and nozzle film carefully to confirm any damage exist before installation. If without any abnormity, please flush all print heads with solvent cleaning solution first and then start installation. If you found any problem, please stop installation and contact with Wit-Color company at once.

Notice: Print heads with problem at your knowledge are still used will be out of warrantee.Step 2:

Map 1 Put printhead and heat sink flatwise, and put partand parttogether slightly but not push and pull by force to close them Step 3:

Map 2 Screw and fix part,,and in order tightly by even force.

Notice: Please screw them by appropriate force and keep the printhead fixed.Step 4:

Finished installation

Notice: More help and information for above operation, please contact with technicalsupport department in time.Shanghai Wit-color Digital Science &Technology Co., Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946 www.wit-color.cn E-mail: [email protected]

8


2.3 Preparation for Installation2.3.1 Site Requirement: machine dimension: Model: L*W*H (Illustrate with Ultra720 printer) Model Ultra 860+ Length 4.4M Width 0.8M Height 1.25M

Remarks: Enough space for image moving and airing purpose should be left. 2.3.2 Workshop Environment Requirement: Basic conditions for Printer workshop are as following: Location: away from wireless radio sources Temperature : 20--- 25. Floor: clean easily and no dust and static. Humidity: between 45% and 75%. Illumination: Pure white light or daylight. 2.3.3 Workshop power supply requirement: AC: 220v, 50HZ single-phase,1500W max. Alternating current power must have a separate circuit switch. And the circuit should be earthed separate from other equipments. And power should be balanced, invariable, no effect from fluctuating of voltage. In the area that power supply is not steady, UPS power supply with capacitance of 2KV is preferred.

2.3.4

Preparations for Installation: 1. PC Workstation (Basic Requirements: windows2000 or windows XP, P4 2.4G or 2.4G above, memory KINGSTONE ddr512m (1 G is preferred), HD80G with high stability) 2. Inks, cleaning solution, lint free wiper, media; 3. UPS power supply is required (2kv absolute on-line) 2.3.5 Operator requirements: All ULTRA series printers operators should be qualified. The requirements are as following: *Be responsible for printers operation and maintenance *Be responsible for communicating with the WIT-COLOR technical support department. *Capable of solving problems and repair printer with telephone or fax support from manufactory; *Good command in speaking and writing English. * Experienced in PC. *Knowledgeable in Electronics and mechanism. *Sensitive to color, familiar with color theory. *With the knowledge of printing procedure



9


Chapter 33.1 Left Printer Box

Control Panel

Introduction

3.2 Right Printer Box



10


Chapter 44.2 Ultra860+ map4.1-1/3

Electric Connection

Map 4.1-1



11


Map 4.2-2

Map 4.3-1Shanghai Wit-color Digital Science &Technology Co., Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946 www.wit-color.cn E-mail: [email protected]

12


Chapter 5

Mechanical Adjustment

Tools: Dial indicator and standard minipad (Thickness=3mm). Operation Procedure: Fix Dial Indicator on the Linear Motion Block, and then check the number which shown on dial indicator while slowly moving dial indicator from left to right. Through adjusting the position of screws (under the plate) to make the plate even until the numbers showed on dial indicator are almost same during its moving on plate in the left, middle and right part of the plate. The usage of minipad: Insert 2 minipads between the printhead plate and printer plate (measure from 2 points). The distance between printhead plate and mechanical plate will be 3 mm(The thickness of minipad). The tolerance is about 0.5 MM. Importance of adjustment: The plate adjustment will affect the resolution of printing image. Due to uneven plate, you may find different resolutions on left and right part of the image. The uneven plate will cause pintch roller pressure uneven also, thus the media will crinkle, and finally scratch the surface of Print head plate. Notice The plate adjustment must be done after the printer installation. The pintch roller should be pressed on the plate during plate even adjustment. The purpose of plate adjustment is to keep printhead plate is parallel with the printing plate. The specifications for plate adjustment attached on the back of Quality Certificate for your reference.



13


Chapter 6 Software Usage Guide6.1 ULTRA Series software 6.1.1 Installation of ULTRA software (Illustrate by Ultra720+/H12, and the operation is applicable for any model printer)1. Insert the disk into CD driver; 2. Double click "My Computer" icon on tabletop, Open window; 3. Double click CD driver icon; 4. Double click SETUP icon, then click NEXT icon; (Shown as Map 6.1.1--- 6.1.4)

Map 6.1.1

Map 6.1.2

Map 6.1.3 5. Install Dongle driver (Shown as Map 6.1.5&6.1.6)

Map 6.1.4

Map 6.1.5Shanghai Wit-color Digital Science &Technology Co., Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946

Map 6.1.6www.wit-color.cn E-mail: [email protected]

14


6. Install pixel board driver program: insert the pixel board into PCI slot, then PC will find PCI equipment automatically, driver programs location is under the path of C:\program files\ultra*h\drivers.

6.1.2 Usage of ULTRA software 6.1.2.1 Introduction of ULTRA software Illustrate by Ultra720+H12, and the operation is applicable for any model printer. Do not change systems timing, otherwise the dongle will be locked.1. Brief Introduction ULTRA series printers are controlled by the software of Ultra Control Center. Three document formats are acceptable for this software. First one is RTL Format, which is the un-compressing output format of RIP software; second one is PRN Format, which is the un-compressing output format of RIP Software; third one is the un-compressing output format of PRT, Which is the un-compressing output format of certain RIP Software. Every format document can be printed at Slow, Medium or Fast speed. And every speed has three printing models: Normal, Enhanced and Ultra. Printer Density also can be adjusted in certain range. Many operations could be controlled simply from windows image interface of software by mouse. PHOTOPRINT RIP software is recommended. (More details for RIP software you may found in its User Manual). 2. Software Guide Double click Ultra720+H12 Control Center icon on the tabletop of computer, then controlling software starts. And then carriage moves to left slowly till pressing the button of Starting point, the carriage will go back and stop at print head cleaning station point. Main image control interface will be on the PC tabletop. Shown as Map 6.1.7. Then printers initialization finished.

Open image Rip file

Close the image file

Print the image as per the parameter

Set up printing parameter

Media edge position setup

Help

Zoom in or zoom out

Forward the media or backward the media

Emendation of the moving position and the printhead setup details

Map 6.1.7

Main Image Control Interface of Printer Controlling Programwww.wit-color.cn E-mail: [email protected]


15


6.1.2.2 Menu Structure of Controlling Program1. File Operation Menu Click File on the menu bar, then enter file operation menu, the displayed interface is shown as map 6.1.8Open printing file

Close printing file

Exit Ultra Control Center software

Map 6.1.8 2. Printing (Operation) Menu (map 6.1.9-1)File info

Print option

Select area

Print image

Map 6.1.9-1



16


File Information Notice: Only when the image file is opened, can you enter this menu order. Displayed information of opened image: File path, File size, Image width & length and RIP resolution etc. (map 6.1.9-2)

Image file Image dimensions Image size

Image resolution

File size File generate date

Map 6.1.9-2 Print Options (Print Options) Options of Printer Resolution Modes, Printer speeds, printer density and Double Printing, vertical space between segments and Edge overlap, Jet Bars Switch, and settings of Purge Cycle based on the carriage stopped at clean station point, etc. (map 6.1.9-3)

Jet bar setup

Print model

Purge setup Print density

Print speed

Encoder setup

Map 6.1.9-3



17


Printer Modes: Normal, Enhanced and Ultra. The option with black dot is selected mode. Click and select one. Printer speeds: Slow, Medium and Fast. The higher the speed is, the higher demands to mechanical parts and electronic circuit and ink quality are. And the printing quality will not be ideal. The option with black dot is selected speed. Click and select one. Printer Density: It has three options from 100% to 150%. Click and select as you need. Jet Bars: Click Jet Bars On could start or stop Color bars printing. The purpose of this function are checking working status of print head by eyes and avoiding the paused print head jamming. Purge Cycle: Click Purge Cycle could start or stop jetting periodically at clean station point. The period could be decided by inputted time (Unit=Secs.). This action could prevent print head jamming when printer pauses. Please stop printing when print head is jammed. Only after cleaning and carriage returned, can print be continued. Due to mechanical reasons, the edge may be not smooth; we can correct this error by inputting certain number into columns of Pause L-adjust and Pause R-adjust. According to the width of media, program could divide image into segments automatically. Segments printing should take edge overlap and vertical space between segments into account. Edge Overlap and Vertical Space between Segments can be set in this interface by inputting the proper size into side column. Unit is as prescribed currently. Choose Encoder: 1. Inner encoder: this option is for servo orientation. 2. Optical encoder: this option is for encoder strip orientation (adopted by the printer which use encoder strip) 3. Magnetic encoder: this option is for magnetic encoder strip orientation (adopted by the printer which use magnetic encoder strip. Until now it is unadopted.)

Automatic Cleaning:Each [ ] passes, you can input the number that you want to set for automatic cleaning frequency; Movement adjustment [ ], you can set the error that for automatic cleaning. As per the position of sucking Nozzle, you can choose cleaning station at left or right. Notice: Click OK button, exit from interface and make modifications into effect. Click Cancel button, exit from interface and invalidate the modifications, and resume the original parameters.



18


Select Area According to the width of media to set number of segments or choose continual printing. Or print certain rectangle area. Starting line for each segment could be set also. (map 6.1.9-4)

Image information

Segment printing or not

Setup printing start position (CM)

Setup printing position (Line number)

Map 6.1.9-4 Print Image Display all printing parameters; you may check whether all settings are correct. When printing is started, the printing schedule will be displayed. So that the procedure could be paused to clean printheads. (map 6.1.9-5)

Printing image information

Print image

Map 6.1.9-5 Notice: Please confirm each parameters correctness before printing.Shanghai Wit-color Digital Science &Technology Co., Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946 www.wit-color.cn E-mail: [email protected]

19


3. View Menu Open or close the display of Toolbar

Open or close the display of windows bar

Statistic printing area

Turn on/off the black of CMYK image in the RGB display Turn on/off the display of image of an image file, Default=On

x1/16 x1/8 x1/4 x1/2 Normal x2 x4 x8

Display image in size of 1/16 original. Display image in size of 1/8 original. Display image in size of 1/4 original. Display image in size of 1/2 original. Display image in original size (Default). Display image in size of two times original. Display image in size of four times original. Display image in size of eight times original.

4. Application Program MenuShanghai Wit-color Digital Science &Technology Co., Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946 www.wit-color.cn E-mail: [email protected]

20


Blank skipping (Only for 720T software)

The same function with Printing Menu of Printing Option, refer to Page 30.

Initialize the zero-point of print board, control medias taking up and offTurn on/off printhead 35V.

Auto media measure (Only for 720T software) Options of Media layout, margins and display of real printing width Calibration, refer to P34-P35

Calibration :Shanghai Wit-color Digital Science &Technology Co., Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946 www.wit-color.cn E-mail: [email protected]

21


Click Calibration order in the menu, then display control interface. This window has two pages, one is Calibration-1, and the other is Calibration-2. The default page is Calibration-1. Click Calibration-1(map 6.1.9-6) or Calibaration-2, and then enter the corresponding page.

Nonuse

Map 6.1.9-6

Calibration-1

On Calibration-1 page, click Set Clean Station Point button, then set the print head cleaning station point. Numerical value could be input in the side box, the unit is millimeter. This value is the horizontal distance from Zero Point Switch to the left edge of Carriage board. And the carriage board will stop at this point when the next Home order is executed. Click Movement InitDist button, then set the movement Initial distance. The numerical value could be input in this column, unit is millimeter. The Movement Initial Distance is the distance of carriage board movement from the status of quiescence to constant speed or from constant speed to quiescence status by accelerating or decelerating movement. Printing should be in the area that carriage boards speed is constant. Then the setting value should be larger than the actual movement distance or equal to it. But this numerical value can not be too large; otherwise the virtual printing width will be reduced. Click Movement L-delay button, and set the distance of Movement Left Delay. The numerical value could be input in the side column, unit is millimeter. Movement L-delay is the carriage movement delay from the movement orders sending to the carriage starting moving right. The larger the value is; the larger the distance of printed image movement to right will be. Click Movement R-delay button, and set the distance of Movement Right Delay. The numerical value could be input in the side column, unit is millimeter. Movement R-delay is the carriage movement delay from the movement orders sending to the carriage starting moving to left. The larger the value is; the larger the distance of printed image movement to left will be. If the mechanical precision in X axis is higher enough, then Movement L-delay will be equal to Movement R-delay approximately. Then right and left edge will be even by adjusting Movement L-delay and Movement R-delay.Shanghai Wit-color Digital Science &Technology Co., Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946 www.wit-color.cn E-mail: [email protected]

22


Notice: These adjustments are for inner encoder use Only! Click Y-Stepping Adjust button, then adjust Y-Stepping slightly. The numerical value could be input in the side column, unit is millimeter. The error of media feeding may be caused by the pressure of pintch rollers or the pull of media tak up system. Then through inputting negative or positive numbers to adjust Y-axis stepping. The number is determined by effect of eyeballing to real printing. Click Bi-Alignment button, and then adjust Bi-Alignment of X axis movement slightly. The numerical value could be input in the side box, unit is millimeter. The numerical volume could be plus or minus. Notice: This function is for Optical Encoder use only. Notice: If media, print mode, print resolution or double printing are different, then Y-Stepping Adjustment will be different also. The corresponding settings should be saved separately. Click Calibration-2 shown as map 6.1.9-7.This operation could adjust the installation position of print head slightly.

Print color swatch

Adjust swatch width Test jets

Unchangeable

As per present printing mode, bidirectional printing vertical lines to test bilateral calibration, size setup and carriage moving status.

Map 6.1.9-7

To test the straightness of printheadsprinting horizontally and vertically

5Help MenuShanghai Wit-color Digital Science &Technology Co., Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946 www.wit-color.cn E-mail: [email protected]

23


Help

Display version and copyright information

6.2 WIT Series Software 6.2.1 Installation of WIT software (Illustrate by Ultra720+H12, and the operation is applicable for any model printer.) Installation of WIT software 1. Insert the disk into CD driver; 2. Double click "My Computer" icon on tabletop, open window; 3. Double click CD driver icon; 4. Double click SETUP icon, then click NEXT icon; (Shown as Map 6.2.1--- 6.2.4)Shanghai Wit-color Digital Science &Technology Co., Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946 www.wit-color.cn E-mail: [email protected]

24


Map 6.2.1

Map 6.2.2

Map 6.2.3 5. Install Dongle driver (Shown as Map 6.2.5&6.2.6)

Map 6.2.4

Map 6.2.5

Map 6.2.6

6. Install pixel board driver program: insert the pixel board into PCI slot, then PC will find PCI equipment automatically, driver programs location is under the path of C:\program files\ultra*h\drivers. Installation of PHOTOPRINT software 1.Insert the disk into CD driver; 2.The disk will run automatically; 3. Finish installation, shown as Map 6.2.2-1---6.2.2-6.;



25


Input the number and password on dongle

Map 6.2.2-1

Map 6.2.2-2

Mark this Option

Map 6.2.2-3

Map 6.2.2-4

Double click this icon

Map 6.2.2-5

Map 6.2.2-6

4. After open the software, the hint requires to install the printer driver will appear;



26


There are all kinds of printer drivers, you can choose the one base on the real situation.

5.Install the printer driver( Map 6.2.2-7/8);

Map 6.2.2-7This equipment name is the printer name.

Map 6.2.2-8Must choose wit-color otherwise, it can not be used.



27


6. Add ICC profile;

Map 6.2.2-9Choose import preset, find the ICC position, click open.

Map 6.2.2-10Click YES, finish installation.

6.2.2 Usage of WIT Software6.2.2.1 General Introduction of WIT Software Notice:Illustrate by WIT720TH12, and the

operation is applicable for any model printer;

The system timing can not be changed, otherwise the dongle will be locked. 1. General Introduction WIT software includes Ultra Control Center operation software and Photoprint Rip software. It can accept any format image file with while RIP while printing function. This function can save your time greatly. 2. Software Reference Guide Double click the icon of Photoprint software on desktop, start this control software image interface.(map 6.2.2-11)



28


Map 6.2.2-11

6.2.2.2 Control Program Menu structure Job Properties 1.Layo ut

Media size setup

Image size setup

Copy image

Change direction of printing image Distance between printing image Reset

2. Workflo w

Status after printing



29


3.Color Management

Choose Output image resolution Default

Choose ICC

4.Printer Option

This is ULTRA software control interface

Notice: Same usage with ULTRA software

Single click

Click send, then start printing



30


Chapter 7

Daily Maintenance

7.1 Print head Maintenance Installed Print heads Maintenance 1. If printer stops printing for a short while, then turn on the Auto Purge and press some inks on the surface of print heads to keep them wet. 2. If printer stops using for a long period, then dip all print heads into the tray with cleaning solution 4-5mm.(Without any low lint paper or lint-free wiper in the tray) 3. If printer stops printing for a long period, then disassemble all print heads from printer, and clean them thoroughly by cleaning solution to prevent them be clogged. 4. Before switching on the power, inspect all print heads adapters and calbles are connected properly and keep the ends of print heads and cables be dry. 5. Before turning on the 35V power supply, make sure inks filled in all print heads. Uninstalled Print Heads Maintenance 1. Flush the inner of print head by cleaning solution thoroughly, and keep the exterior of print head clean. 2. Store print head in anticorrosive container, and seal the container. 3. Before moving print head into the container, cap the ink inlet of print head first. 4. Keep enough cleaning solution in the container, then dip all print heads into the cleaning solution 4-5mm.(Without any low lint paper or lint-free wiper in the tray) New Print Heads Maintenance 1. Flush the new print head thoroughly. 2. Before installing print head, dry the end circuit part of print head by pneumatic gun, and make sure wihout any liquid or conductor on it. 3. Keep well the red print heads cover, the white ink inlet cap and the bag. Remarks: 1. To prevent micro fuzz entering print head, keep low lint paper and lint free wiper away from the print head tray. 2. To avoid dirty objects coming into print head, cap the ink inlet of print head during storing. 3. To prevent cleaning solution volatilizing, seal the print heads container. 7.2 Printer Maintenance 1. Check the linear rails lubricating status often and lubricate the linear rail with certified lubricating oil per 8 hours after clean the rail. 2. Lubricate the balls of slide block on linear rail regularly with specific oil and special oiling gun appointed by Authorized linear rail dealers. 3. Check ink quantity frequently and make sure the ink is enough for printing. 4. Change the ink filter periodically. 5. Clean print heads, ink tanks and ink level sensor regularly. 6. Check the tightness of joints of circuits and screws per 10 days around. 7. Check the status of axis joint parts and make sure no slippery, and then tighten all screws (as the status when it leaves factory standard.)Shanghai Wit-color Digital Science &Technology Co., Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946 www.wit-color.cn E-mail: [email protected]

31


8. Clean Computer, power supply and circuit boards regularly. 9. It is better not to print under high speed during new printer Running in period (before finish printing of 15000 ).

Attachment

Trouble Shooting Guide

8.1 Print Head Part 8.2 Ink Supply System 8.3 Heating System 8.4 Movement System 8.5 Media Feeding/Take up System 8.6 Computer System 8.7 Delta Servo Controller alarm solve method(Details in the attached form)



32

ultra860+ manual english

Documents

compressing output format

low lint paper

movement orders sending

driver programs location

program files ultra

lint free wiper

ups power supply

carriage starting moving