ultra stream hydrogen water system installation presentation
TRANSCRIPT
Online Customer Guide
ULTRASTREAM FILTRATION: INSTALLATION
Because we designed it, we made it easy to install.
No plumber required for benchtop install.
Simple Installation
ULTRASTREAM: INSTALLATION
You may require one of the supplied adaptors for your faucet.
Attach Diverter to faucet
ULTRASTREAM: INSTALLATION
You may require one of the supplied adaptors for your faucet.
Attach Diverter to faucet
ULTRASTREAM: INSTALLATION
You may require one of the supplied adaptors for your faucet.
Attach Diverter to faucet
ULTRASTREAM: INSTALLATION
1. Put hose through side hole.
Attach Hose ToUltraStream
ULTRASTREAM: INSTALLATION
2. Insert hose end through hole.
Attach Hose to UltraStream
ULTRASTREAM: INSTALLATION
3. Push hose end into valve.
Attach Hoseto UltraStream
ULTRASTREAM: INSTALLATION
3. Check Blue valve is set to OPEN.
Attach Hose to UltraStream
ULTRASTREAM: INSTALLATION
3. Stand up UltraStream and turn on tap. Run for at least 10 mins.
READY TO POUR
ULTRASTREAM: INSTALLATION
TURN IT ON
ULTRASTREAM: INSTALLATION
RUN FOR 10 MINUTES
ULTRASTREAM FILTRATION: FILTER REPLACEMENT
Remove spout Remove Cap Unscrew Old Filter
ADD NEW FILTER, REVERSE ORDER. Run for 10m. IT’S DONE!
ULTRASTREAM: UNDERSINK INSTALLATION
You need:A ‘Handyperson’ or plumber.
A 38mm hole in your sink orBenchtop.
A Tube Saw to cut the hole.
All parts included: faucet designed specially for UltraStream, pressure limiting valve, comprehensive manual. Over 1000 already installed.