ulnar osteotomy compression plate - trimed inc. · ulnar osteotomy compression plate uocp • a...
TRANSCRIPT
TriMed Ulnar Osteotomy SystemSurgical Technique
Ulnar Osteotomy Compression Plate
Plate Application
• ExposetheboneintheintervalbetweentheECUandFCU.
• Applytheplatetothebone.Ensurethatthetwosmallinstrumentholesonthesideoftheplatearevisible.
• Positiontheplatetoavoiddistalimpingementduringshortening.
• Drillusing2.3mm(red)drillandinsertonenon-locking3.2mmscrewintheslottedholeattheendfarthestfromtheosteotomysite.Repeatwiththree3.2mmscrewsontheoppositesideofplate,startingwiththeendscrewhole.
Pin Fixation
• PlacetheCombinationDrillGuideontheplate.
• Inserttheshort1.6mm(0.062”)K-wireflushalongthebackwallofthepinslotintheCombinationDrillGuideandthroughonecortex.
• RepeatwiththelongerK-wireandremovetheCombinationDrillGuide.
Osteotomy
• Selecttheappropriate‘A’SawGuidebasedontheplannedresection(2,3,4or5mm)andinsertintotheplate.HoldtheguidewiththeBoneClampor1.6mmK-wire(seeTips).
• Makethecutwithasawbladeof0.4mmthicknessandirrigateliberally.
• Remove‘A’SawGuideandinsert‘B’SawGuide.Makethesecondcutandremovebonewafer.
Compression Clamp Application
• InserttheCompressionClampintotheholeonthefixededgeoftheplate.
• AdjusttheclampsotheK-wiresleeveisjustbelowthecentralaxisoftheulnaandawayfromtheosteotomysite.
• Inserta1.6mm(0.062”)K-wirethroughthesleeveandengagethefarcortex.
1
2
3
4
UlnarOsteotomyCompressionPlate
2
Osteotomy Compression
• Loosenthescrewintheslottedhole1/4turn.
• ShortentheulnawithCompressionClamp.UseaBoneClampforaddedcompressionoftheosteotomysite.
• Checkbothsidesoftheosteotomysiteforbonecoaptation.
Lag Screw Hole Preparation
• Re-applytheCombinationDrillGuideanddrillalagscrewholeusing2.3mm(red)drillandguide.
• RemovetheCombinationDrillGuide.
• MeasurethelongsideoftheholewiththeDepthGauge.
• Usethebonetaptoensurethatthelagscrewthreadseasily.
Lag Screw Insertion
• Insertlagscrewensuringpurchasewiththefarcortex.
• Re-tightenthecorticalscrewintheslottedholeandensuretheosteotomyremainscompressed.
Final Fixation
• Inserttheremainingcorticalscrews.
• RemoveK-wiresandBoneClamp.
5
7
6
8
UlnarOsteotomyCompressionPlate
3
TIPS
Ulnar Osteotomy Compression PlateUOCP
• A1.6mmK-wireortheBoneClampcanbeusedto stabilizethecuttingguidestotheplatewhile osteotomycutsaremade.
• Osteotomieslargerthan5mmmaybemadeby performingsuccessivecuts.
Bone ClampOBC
Compression ClampCOMPC-UOS
Saw GuideUOSG-A-x02mm to 05mm
UOSG-B
K-WireWIRE-1.6/065WIRE-1.6/100
LAG HOLE K-WIRE SLOTS SLOTTEd HOLE
InSTRUMEnT HOLES
Combination (Drill Guide)GdUOS-1.6
Cortical ScrewHEX3.2-xx
10mm to 18mm
Cortical Locking ScrewLCBS3.2-xx10mm to 18mm
Cortical Lag ScrewLAG3.2-xx14mm to 26mm
Saw BladeOSB-9x
0.4mm thickness(Use blade lengths of 25–32mm
and widths of 6–10mm)
©2019 TriM
ed, Inc. All rights reserved. LC-72-2000-002 REV-B (03-19)
TriMed,Inc./27533AvenueHopkins/Valencia,CA91355USA/800-633-7221/www.trimedortho.com
ThepresentlyissuedU.S.patentsare:6,113,603;7,037,308;7,044,951;7,195,633;7,540,874;7,942,877;8,177,822;8,821,508;8,906,070;9,089,376;9,283,010;9,220,546;9,237,911;9,402,665;9,636,157;9,861,402.Seetrimedortho.comforalllistedpatents.
Thetechniquepresentedisonesuggestedsurgicaltechnique.Thedecisiontouseaspecificimplantandthesurgicaltechniquemustbebasedonsoundmedicaljudgmentbythesurgeonthattakesintoconsiderationfactorssuchasthecircumstancesandconfigurationoftheinjury.
Allimplantsmadefromsurgicalgradestainlesssteel